* [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
@ 2021-07-10 11:04 ` Stefan Wahren
0 siblings, 0 replies; 9+ messages in thread
From: Stefan Wahren @ 2021-07-10 11:04 UTC (permalink / raw)
To: Nicolas Saenz Julienne
Cc: Florian Fainelli, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Arnd Bergmann, Olof Johansson,
Saravana Kannan, Greg Kroah-Hartman, soc, linux-rpi-kernel,
linux-arm-kernel, Stefan Wahren
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e590474768f1 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
arch/arm/configs/multi_v7_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 52a0400..d9abaae 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -821,7 +821,7 @@ CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_AB8500_USB=y
CONFIG_KEYSTONE_USB_PHY=m
-CONFIG_NOP_USB_XCEIV=m
+CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_PHY_USB=m
CONFIG_TWL6030_USB=m
CONFIG_USB_GPIO_VBUS=y
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
@ 2021-07-11 21:27 ` Florian Fainelli
0 siblings, 0 replies; 9+ messages in thread
From: Florian Fainelli @ 2021-07-11 21:27 UTC (permalink / raw)
To: Stefan Wahren, Nicolas Saenz Julienne
Cc: Ray Jui, Scott Branden, bcm-kernel-feedback-list, Arnd Bergmann,
Olof Johansson, Saravana Kannan, Greg Kroah-Hartman, soc,
linux-rpi-kernel, linux-arm-kernel
On 7/10/2021 4:04 AM, Stefan Wahren wrote:
> The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
> been a "regression source" a lot of times. The last case is breakage of
> USB mass storage boot has been commit e590474768f1 ("driver core: Set
> fw_devlink=on by default") for multi_v7_defconfig. As long as
> NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
> endlessly and prevent booting from USB mass storage device. So make
> the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Should not that be fixed somehow?
>
> Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
> Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
> arch/arm/configs/multi_v7_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index 52a0400..d9abaae 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -821,7 +821,7 @@ CONFIG_USB_ISP1760=y
> CONFIG_USB_HSIC_USB3503=y
> CONFIG_AB8500_USB=y
> CONFIG_KEYSTONE_USB_PHY=m
> -CONFIG_NOP_USB_XCEIV=m
> +CONFIG_NOP_USB_XCEIV=y
> CONFIG_AM335X_PHY_USB=m
> CONFIG_TWL6030_USB=m
> CONFIG_USB_GPIO_VBUS=y
>
--
Florian
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
@ 2021-07-11 21:27 ` Florian Fainelli
0 siblings, 0 replies; 9+ messages in thread
From: Florian Fainelli @ 2021-07-11 21:27 UTC (permalink / raw)
To: Stefan Wahren, Nicolas Saenz Julienne
Cc: Ray Jui, Scott Branden, bcm-kernel-feedback-list, Arnd Bergmann,
Olof Johansson, Saravana Kannan, Greg Kroah-Hartman, soc,
linux-rpi-kernel, linux-arm-kernel
On 7/10/2021 4:04 AM, Stefan Wahren wrote:
> The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
> been a "regression source" a lot of times. The last case is breakage of
> USB mass storage boot has been commit e590474768f1 ("driver core: Set
> fw_devlink=on by default") for multi_v7_defconfig. As long as
> NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
> endlessly and prevent booting from USB mass storage device. So make
> the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Should not that be fixed somehow?
>
> Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
> Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
> arch/arm/configs/multi_v7_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index 52a0400..d9abaae 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -821,7 +821,7 @@ CONFIG_USB_ISP1760=y
> CONFIG_USB_HSIC_USB3503=y
> CONFIG_AB8500_USB=y
> CONFIG_KEYSTONE_USB_PHY=m
> -CONFIG_NOP_USB_XCEIV=m
> +CONFIG_NOP_USB_XCEIV=y
> CONFIG_AM335X_PHY_USB=m
> CONFIG_TWL6030_USB=m
> CONFIG_USB_GPIO_VBUS=y
>
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
@ 2021-07-12 5:04 ` Stefan Wahren
0 siblings, 0 replies; 9+ messages in thread
From: Stefan Wahren @ 2021-07-12 5:04 UTC (permalink / raw)
To: Florian Fainelli, Nicolas Saenz Julienne
Cc: Ray Jui, Scott Branden, bcm-kernel-feedback-list, Arnd Bergmann,
Olof Johansson, Saravana Kannan, Greg Kroah-Hartman, soc,
linux-rpi-kernel, linux-arm-kernel
Hi Florian,
Am 11.07.21 um 23:27 schrieb Florian Fainelli:
>
>
> On 7/10/2021 4:04 AM, Stefan Wahren wrote:
>> The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
>> been a "regression source" a lot of times. The last case is breakage of
>> USB mass storage boot has been commit e590474768f1 ("driver core: Set
>> fw_devlink=on by default") for multi_v7_defconfig. As long as
>> NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
>> endlessly and prevent booting from USB mass storage device. So make
>> the driver built-in as in bcm2835_defconfig and arm64/defconfig.
>
> Should not that be fixed somehow?
maybe that why send this bug report, but never get a feedback [1]
My spare time is too limited to fight multiple regressions on Raspberry
Pi, so i decided send at least this solution.
[1] - https://www.spinics.net/lists/arm-kernel/msg905208.html
>
>>
>> Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
>> Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
>> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
>> ---
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
@ 2021-07-12 5:04 ` Stefan Wahren
0 siblings, 0 replies; 9+ messages in thread
From: Stefan Wahren @ 2021-07-12 5:04 UTC (permalink / raw)
To: Florian Fainelli, Nicolas Saenz Julienne
Cc: Ray Jui, Scott Branden, bcm-kernel-feedback-list, Arnd Bergmann,
Olof Johansson, Saravana Kannan, Greg Kroah-Hartman, soc,
linux-rpi-kernel, linux-arm-kernel
Hi Florian,
Am 11.07.21 um 23:27 schrieb Florian Fainelli:
>
>
> On 7/10/2021 4:04 AM, Stefan Wahren wrote:
>> The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
>> been a "regression source" a lot of times. The last case is breakage of
>> USB mass storage boot has been commit e590474768f1 ("driver core: Set
>> fw_devlink=on by default") for multi_v7_defconfig. As long as
>> NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
>> endlessly and prevent booting from USB mass storage device. So make
>> the driver built-in as in bcm2835_defconfig and arm64/defconfig.
>
> Should not that be fixed somehow?
maybe that why send this bug report, but never get a feedback [1]
My spare time is too limited to fight multiple regressions on Raspberry
Pi, so i decided send at least this solution.
[1] - https://www.spinics.net/lists/arm-kernel/msg905208.html
>
>>
>> Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
>> Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
>> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
>> ---
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
2021-07-10 11:04 ` Stefan Wahren
(?)
(?)
@ 2021-07-16 21:22 ` patchwork-bot+linux-soc
-1 siblings, 0 replies; 9+ messages in thread
From: patchwork-bot+linux-soc @ 2021-07-16 21:22 UTC (permalink / raw)
To: Stefan Wahren; +Cc: soc
Hello:
This patch was applied to soc/soc.git (refs/heads/arm/fixes):
On Sat, 10 Jul 2021 13:04:55 +0200 you wrote:
> The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
> been a "regression source" a lot of times. The last case is breakage of
> USB mass storage boot has been commit e590474768f1 ("driver core: Set
> fw_devlink=on by default") for multi_v7_defconfig. As long as
> NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
> endlessly and prevent booting from USB mass storage device. So make
> the driver built-in as in bcm2835_defconfig and arm64/defconfig.
>
> [...]
Here is the summary with links:
- ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
https://git.kernel.org/soc/soc/c/ab37a7a890c1
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
@ 2021-07-16 21:24 ` Arnd Bergmann
0 siblings, 0 replies; 9+ messages in thread
From: Arnd Bergmann @ 2021-07-16 21:24 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Stefan Wahren
Cc: Arnd Bergmann, Olof Johansson, linux-rpi-kernel, Scott Branden,
Florian Fainelli, Greg Kroah-Hartman, bcm-kernel-feedback-list,
Ray Jui, soc, linux-arm-kernel, Saravana Kannan
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 10 Jul 2021 13:04:55 +0200, Stefan Wahren wrote:
> The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
> been a "regression source" a lot of times. The last case is breakage of
> USB mass storage boot has been commit e590474768f1 ("driver core: Set
> fw_devlink=on by default") for multi_v7_defconfig. As long as
> NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
> endlessly and prevent booting from USB mass storage device. So make
> the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Applied to arm/fixes, thanks!
[1/1] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
commit: ab37a7a890c1176144a4c66ff3d51ef2c20ed486
Arnd
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
@ 2021-07-16 21:24 ` Arnd Bergmann
0 siblings, 0 replies; 9+ messages in thread
From: Arnd Bergmann @ 2021-07-16 21:24 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Stefan Wahren
Cc: Arnd Bergmann, Olof Johansson, linux-rpi-kernel, Scott Branden,
Florian Fainelli, Greg Kroah-Hartman, bcm-kernel-feedback-list,
Ray Jui, soc, linux-arm-kernel, Saravana Kannan
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 10 Jul 2021 13:04:55 +0200, Stefan Wahren wrote:
> The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
> been a "regression source" a lot of times. The last case is breakage of
> USB mass storage boot has been commit e590474768f1 ("driver core: Set
> fw_devlink=on by default") for multi_v7_defconfig. As long as
> NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
> endlessly and prevent booting from USB mass storage device. So make
> the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Applied to arm/fixes, thanks!
[1/1] ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
commit: ab37a7a890c1176144a4c66ff3d51ef2c20ed486
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread