* [PATCH] Documentation: fix incorrect macro referencing in mscc-phy-vsc8531.txt
@ 2021-07-28 16:01 Baisheng Gao
2021-08-02 21:48 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Baisheng Gao @ 2021-07-28 16:01 UTC (permalink / raw)
To: robh+dt, kuba, davem; +Cc: devicetree
Modify LINK_1000_ACTIVITY and LINK_100_ACTIVITY to VSC8531_LINK_1000_ACTIVITY
and VSC8531_LINK_100_ACTIVITY respectively in the example of ethernet-phy node
according to include/dt-bindings/net/mscc-phy-vsc8531.h.
Signed-off-by: Baisheng Gao <gaobaisheng@bonc.com.cn>
---
Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
index 87a27d7..0a3647f 100644
--- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -67,7 +67,7 @@ Example:
compatible = "ethernet-phy-id0007.0570";
vsc8531,vddmac = <3300>;
vsc8531,edge-slowdown = <7>;
- vsc8531,led-0-mode = <LINK_1000_ACTIVITY>;
- vsc8531,led-1-mode = <LINK_100_ACTIVITY>;
+ vsc8531,led-0-mode = <VSC8531_LINK_1000_ACTIVITY>;
+ vsc8531,led-1-mode = <VSC8531_LINK_100_ACTIVITY>;
load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] Documentation: fix incorrect macro referencing in mscc-phy-vsc8531.txt
2021-07-28 16:01 [PATCH] Documentation: fix incorrect macro referencing in mscc-phy-vsc8531.txt Baisheng Gao
@ 2021-08-02 21:48 ` Rob Herring
0 siblings, 0 replies; 3+ messages in thread
From: Rob Herring @ 2021-08-02 21:48 UTC (permalink / raw)
To: Baisheng Gao; +Cc: robh+dt, kuba, davem, devicetree
On Thu, 29 Jul 2021 00:01:26 +0800, Baisheng Gao wrote:
> Modify LINK_1000_ACTIVITY and LINK_100_ACTIVITY to VSC8531_LINK_1000_ACTIVITY
> and VSC8531_LINK_100_ACTIVITY respectively in the example of ethernet-phy node
> according to include/dt-bindings/net/mscc-phy-vsc8531.h.
>
> Signed-off-by: Baisheng Gao <gaobaisheng@bonc.com.cn>
> ---
> Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
Applied, thanks!
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] Documentation: fix incorrect macro referencing in mscc-phy-vsc8531.txt
@ 2021-07-31 3:34 Baisheng Gao
0 siblings, 0 replies; 3+ messages in thread
From: Baisheng Gao @ 2021-07-31 3:34 UTC (permalink / raw)
To: linux-kernel
Modify LINK_1000_ACTIVITY and LINK_100_ACTIVITY to VSC8531_LINK_1000_ACTIVITY
and VSC8531_LINK_100_ACTIVITY respectively in the example of ethernet-phy node
according to include/dt-bindings/net/mscc-phy-vsc8531.h.
Signed-off-by: Baisheng Gao <gaobaisheng@bonc.com.cn>
---
Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
index 87a27d7..0a3647f 100644
--- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -67,7 +67,7 @@ Example:
compatible = "ethernet-phy-id0007.0570";
vsc8531,vddmac = <3300>;
vsc8531,edge-slowdown = <7>;
- vsc8531,led-0-mode = <LINK_1000_ACTIVITY>;
- vsc8531,led-1-mode = <LINK_100_ACTIVITY>;
+ vsc8531,led-0-mode = <VSC8531_LINK_1000_ACTIVITY>;
+ vsc8531,led-1-mode = <VSC8531_LINK_100_ACTIVITY>;
load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-08-02 21:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-28 16:01 [PATCH] Documentation: fix incorrect macro referencing in mscc-phy-vsc8531.txt Baisheng Gao
2021-08-02 21:48 ` Rob Herring
2021-07-31 3:34 Baisheng Gao
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.