[PATCH v6 1/2] PM / Domains: Add support for 'required-opps' to set default perf state

[Rajendra Nayak <rnayak@codeaurora.org>]

Some devices within power domains with performance states do not
support DVFS, but still need to vote on a default/static state
while they are active. They can express this using the 'required-opps'
property in device tree, which points to the phandle of the OPP
supported by the corresponding power-domains.

Add support to parse this information from DT and then set the
specified performance state during attach and drop it on detach.
runtime suspend/resume callbacks already have logic to drop/set
the vote as needed and should take care of dropping the default
perf state vote on runtime suspend and restore it back on runtime
resume.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/base/power/domain.c | 28 ++++++++++++++++++++++++++--
 include/linux/pm_domain.h   |  1 +
 2 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index a934c67..b9b5a9b 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2598,6 +2598,12 @@ static void genpd_dev_pm_detach(struct device *dev, bool power_off)
 
 	dev_dbg(dev, "removing from PM domain %s\n", pd->name);
 
+	/* Drop the default performance state */
+	if (dev_gpd_data(dev)->default_pstate) {
+		dev_pm_genpd_set_performance_state(dev, 0);
+		dev_gpd_data(dev)->default_pstate = 0;
+	}
+
 	for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
 		ret = genpd_remove_device(pd, dev);
 		if (ret != -EAGAIN)
@@ -2637,6 +2643,8 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
 {
 	struct of_phandle_args pd_args;
 	struct generic_pm_domain *pd;
+	struct device_node *np;
+	int pstate;
 	int ret;
 
 	ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
@@ -2675,10 +2683,26 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
 		genpd_unlock(pd);
 	}
 
-	if (ret)
+	if (ret) {
 		genpd_remove_device(pd, dev);
+		return -EPROBE_DEFER;
+	}
+
+	/* Set the default performance state */
+	np = dev->of_node;
+	if (of_parse_phandle(np, "required-opps", index)) {
+		pstate = of_get_required_opp_performance_state(np, index);
+		if (pstate < 0) {
+			ret = pstate;
+			dev_err(dev, "failed to set required performance state for power-domain %s: %d\n",
+				pd->name, ret);
+		} else {
+			dev_pm_genpd_set_performance_state(dev, pstate);
+			dev_gpd_data(dev)->default_pstate = pstate;
+		}
+	}
 
-	return ret ? -EPROBE_DEFER : 1;
+	return ret ? ret : 1;
 }
 
 /**
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 21a0577..67017c9 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -198,6 +198,7 @@ struct generic_pm_domain_data {
 	struct notifier_block *power_nb;
 	int cpu;
 	unsigned int performance_state;
+	unsigned int default_pstate;
 	unsigned int rpm_pstate;
 	ktime_t	next_wakeup;
 	void *data;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation