From: haibo.chen@nxp.com To: adrian.hunter@intel.com, ulf.hansson@linaro.org, shawnguo@kernel.org, robh+dt@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-mmc@vger.kernel.org, linux-imx@nxp.com, haibo.chen@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/6] mmc: sdhci-esdhc-imx: remove redundant code for manual tuning Date: Mon, 16 Aug 2021 20:38:23 +0800 [thread overview] Message-ID: <1629117508-4886-1-git-send-email-haibo.chen@nxp.com> (raw) From: Haibo Chen <haibo.chen@nxp.com> For manual tuning method, already call esdhc_prepare_tuning() config the necessary registers, so remove the redundant code in esdhc_writew_le() for SDHCI_HOST_CONTROL2. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 57b19ca1ad6d..a49fac719fca 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -628,17 +628,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) else new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); - if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { - new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); - if (val & SDHCI_CTRL_TUNED_CLK) { - new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; - new_val |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; - } else { - new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; - new_val &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; - } - writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); - } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { u32 v = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); if (val & SDHCI_CTRL_TUNED_CLK) { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: haibo.chen@nxp.com To: adrian.hunter@intel.com, ulf.hansson@linaro.org, shawnguo@kernel.org, robh+dt@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-mmc@vger.kernel.org, linux-imx@nxp.com, haibo.chen@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/6] mmc: sdhci-esdhc-imx: remove redundant code for manual tuning Date: Mon, 16 Aug 2021 20:38:23 +0800 [thread overview] Message-ID: <1629117508-4886-1-git-send-email-haibo.chen@nxp.com> (raw) From: Haibo Chen <haibo.chen@nxp.com> For manual tuning method, already call esdhc_prepare_tuning() config the necessary registers, so remove the redundant code in esdhc_writew_le() for SDHCI_HOST_CONTROL2. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 57b19ca1ad6d..a49fac719fca 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -628,17 +628,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) else new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); - if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { - new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); - if (val & SDHCI_CTRL_TUNED_CLK) { - new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; - new_val |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; - } else { - new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; - new_val &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; - } - writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); - } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { u32 v = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); if (val & SDHCI_CTRL_TUNED_CLK) { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-08-16 13:00 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-16 12:38 haibo.chen [this message] 2021-08-16 12:38 ` [PATCH 1/6] mmc: sdhci-esdhc-imx: remove redundant code for manual tuning haibo.chen 2021-08-16 12:38 ` [PATCH 2/6] mmc: sdhci-eadhc-imx: select the correct mode for auto tuning haibo.chen 2021-08-16 12:38 ` haibo.chen 2021-08-16 12:38 ` [PATCH 3/6] dt-bindings: mmc: fsl-imx-esdhc: add fsl,sdio-async-interrupt-enabled binding haibo.chen 2021-08-16 12:38 ` [PATCH 3/6] dt-bindings: mmc: fsl-imx-esdhc: add fsl, sdio-async-interrupt-enabled binding haibo.chen 2021-08-16 13:43 ` [PATCH 3/6] dt-bindings: mmc: fsl-imx-esdhc: add fsl,sdio-async-interrupt-enabled binding Ulf Hansson 2021-08-16 13:43 ` Ulf Hansson 2021-08-17 6:41 ` Bough Chen 2021-08-17 6:41 ` Bough Chen 2021-08-17 7:37 ` Ulf Hansson 2021-08-17 7:37 ` Ulf Hansson 2021-08-16 12:38 ` [PATCH 4/6] mmc: host: sdhci-esdhc-imx.c: correct the auto-tuning setting for sdio device haibo.chen 2021-08-16 12:38 ` haibo.chen 2021-08-16 13:53 ` Ulf Hansson 2021-08-16 13:53 ` Ulf Hansson 2021-08-17 6:57 ` Bough Chen 2021-08-17 6:57 ` Bough Chen 2021-08-17 8:00 ` Ulf Hansson 2021-08-17 8:00 ` Ulf Hansson 2021-08-17 12:29 ` Bough Chen 2021-08-17 12:29 ` Bough Chen 2021-08-16 12:38 ` [PATCH 5/6] arm64: dts: imx8mm-evk: add sdio wifi support haibo.chen 2021-08-16 12:38 ` haibo.chen 2021-08-16 12:38 ` [PATCH 6/6] arm64: dts: imx8mn-evk: " haibo.chen 2021-08-16 12:38 ` haibo.chen 2021-08-24 13:52 ` [PATCH 1/6] mmc: sdhci-esdhc-imx: remove redundant code for manual tuning Ulf Hansson 2021-08-24 13:52 ` Ulf Hansson 2021-08-25 2:16 ` Bough Chen 2021-08-25 2:16 ` Bough Chen 2021-08-25 9:22 ` Ulf Hansson 2021-08-25 9:22 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1629117508-4886-1-git-send-email-haibo.chen@nxp.com \ --to=haibo.chen@nxp.com \ --cc=adrian.hunter@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-mmc@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.