* [PATCH] wcn36xx: Ensure finish scan is not requested before start scan
@ 2021-08-18 11:31 Loic Poulain
2021-08-18 12:54 ` Bryan O'Donoghue
2021-08-29 7:10 ` Kalle Valo
0 siblings, 2 replies; 3+ messages in thread
From: Loic Poulain @ 2021-08-18 11:31 UTC (permalink / raw)
To: kvalo
Cc: bryan.odonoghue, wcn36xx, linux-wireless, Joseph Gates, stable,
Loic Poulain
From: Joseph Gates <jgates@squareup.com>
If the operating channel is the first in the scan list, it was seen that
a finish scan request would be sent before a start scan request was
sent, causing the firmware to fail all future scans. Track the current
channel being scanned to avoid requesting the scan finish before it
starts.
Cc: <stable@vger.kernel.org>
Fixes: 5973a2947430 ("wcn36xx: Fix software-driven scan")
Signed-off-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
drivers/net/wireless/ath/wcn36xx/main.c | 5 ++++-
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index dabed4e..e8c772a 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -405,13 +405,14 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
wcn36xx_dbg(WCN36XX_DBG_MAC, "wcn36xx_config channel switch=%d\n",
ch);
- if (wcn->sw_scan_opchannel == ch) {
+ if (wcn->sw_scan_opchannel == ch && wcn->sw_scan_channel) {
/* If channel is the initial operating channel, we may
* want to receive/transmit regular data packets, then
* simply stop the scan session and exit PS mode.
*/
wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
wcn->sw_scan_vif);
+ wcn->sw_scan_channel = 0;
} else if (wcn->sw_scan) {
/* A scan is ongoing, do not change the operating
* channel, but start a scan session on the channel.
@@ -419,6 +420,7 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN,
wcn->sw_scan_vif);
wcn36xx_smd_start_scan(wcn, ch);
+ wcn->sw_scan_channel = ch;
} else {
wcn36xx_change_opchannel(wcn, ch);
}
@@ -699,6 +701,7 @@ static void wcn36xx_sw_scan_start(struct ieee80211_hw *hw,
wcn->sw_scan = true;
wcn->sw_scan_vif = vif;
+ wcn->sw_scan_channel = 0;
if (vif_priv->sta_assoc)
wcn->sw_scan_opchannel = WCN36XX_HW_CHANNEL(wcn);
else
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 71fa999..d0fcce8 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -232,6 +232,7 @@ struct wcn36xx {
struct cfg80211_scan_request *scan_req;
bool sw_scan;
u8 sw_scan_opchannel;
+ u8 sw_scan_channel;
struct ieee80211_vif *sw_scan_vif;
struct mutex scan_lock;
bool scan_aborted;
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] wcn36xx: Ensure finish scan is not requested before start scan
2021-08-18 11:31 [PATCH] wcn36xx: Ensure finish scan is not requested before start scan Loic Poulain
@ 2021-08-18 12:54 ` Bryan O'Donoghue
2021-08-29 7:10 ` Kalle Valo
1 sibling, 0 replies; 3+ messages in thread
From: Bryan O'Donoghue @ 2021-08-18 12:54 UTC (permalink / raw)
To: Loic Poulain, kvalo; +Cc: wcn36xx, linux-wireless, Joseph Gates, stable
On 18/08/2021 12:31, Loic Poulain wrote:
> From: Joseph Gates <jgates@squareup.com>
>
> If the operating channel is the first in the scan list, it was seen that
> a finish scan request would be sent before a start scan request was
> sent, causing the firmware to fail all future scans. Track the current
> channel being scanned to avoid requesting the scan finish before it
> starts.
>
> Cc: <stable@vger.kernel.org>
> Fixes: 5973a2947430 ("wcn36xx: Fix software-driven scan")
> Signed-off-by: Joseph Gates <jgates@squareup.com>
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
> drivers/net/wireless/ath/wcn36xx/main.c | 5 ++++-
> drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
> index dabed4e..e8c772a 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -405,13 +405,14 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
> wcn36xx_dbg(WCN36XX_DBG_MAC, "wcn36xx_config channel switch=%d\n",
> ch);
>
> - if (wcn->sw_scan_opchannel == ch) {
> + if (wcn->sw_scan_opchannel == ch && wcn->sw_scan_channel) {
> /* If channel is the initial operating channel, we may
> * want to receive/transmit regular data packets, then
> * simply stop the scan session and exit PS mode.
> */
> wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
> wcn->sw_scan_vif);
> + wcn->sw_scan_channel = 0;
> } else if (wcn->sw_scan) {
> /* A scan is ongoing, do not change the operating
> * channel, but start a scan session on the channel.
> @@ -419,6 +420,7 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
> wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN,
> wcn->sw_scan_vif);
> wcn36xx_smd_start_scan(wcn, ch);
> + wcn->sw_scan_channel = ch;
> } else {
> wcn36xx_change_opchannel(wcn, ch);
> }
> @@ -699,6 +701,7 @@ static void wcn36xx_sw_scan_start(struct ieee80211_hw *hw,
>
> wcn->sw_scan = true;
> wcn->sw_scan_vif = vif;
> + wcn->sw_scan_channel = 0;
> if (vif_priv->sta_assoc)
> wcn->sw_scan_opchannel = WCN36XX_HW_CHANNEL(wcn);
> else
> diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> index 71fa999..d0fcce8 100644
> --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> @@ -232,6 +232,7 @@ struct wcn36xx {
> struct cfg80211_scan_request *scan_req;
> bool sw_scan;
> u8 sw_scan_opchannel;
> + u8 sw_scan_channel;
> struct ieee80211_vif *sw_scan_vif;
> struct mutex scan_lock;
> bool scan_aborted;
>
LGTM
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] wcn36xx: Ensure finish scan is not requested before start scan
2021-08-18 11:31 [PATCH] wcn36xx: Ensure finish scan is not requested before start scan Loic Poulain
2021-08-18 12:54 ` Bryan O'Donoghue
@ 2021-08-29 7:10 ` Kalle Valo
1 sibling, 0 replies; 3+ messages in thread
From: Kalle Valo @ 2021-08-29 7:10 UTC (permalink / raw)
To: Loic Poulain
Cc: bryan.odonoghue, wcn36xx, linux-wireless, Joseph Gates, stable,
Loic Poulain
Loic Poulain <loic.poulain@linaro.org> wrote:
> If the operating channel is the first in the scan list, it was seen that
> a finish scan request would be sent before a start scan request was
> sent, causing the firmware to fail all future scans. Track the current
> channel being scanned to avoid requesting the scan finish before it
> starts.
>
> Cc: <stable@vger.kernel.org>
> Fixes: 5973a2947430 ("wcn36xx: Fix software-driven scan")
> Signed-off-by: Joseph Gates <jgates@squareup.com>
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks.
d195d7aac09b wcn36xx: Ensure finish scan is not requested before start scan
--
https://patchwork.kernel.org/project/linux-wireless/patch/1629286303-13179-1-git-send-email-loic.poulain@linaro.org/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-08-29 7:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-18 11:31 [PATCH] wcn36xx: Ensure finish scan is not requested before start scan Loic Poulain
2021-08-18 12:54 ` Bryan O'Donoghue
2021-08-29 7:10 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.