* [i915] invert_brightness on 8086:0116:103c:1854
[not found] <31941380503904@web12m.yandex.ru>
@ 2013-10-05 4:06 ` Kirill Tkhai
2013-10-07 7:44 ` Jani Nikula
0 siblings, 1 reply; 5+ messages in thread
From: Kirill Tkhai @ 2013-10-05 4:06 UTC (permalink / raw)
To: intel-gfx; +Cc: daniel.vetter
Hi,
I've just installed kernel 3.10 on HP 250 G1 and the found option invert_brightness is required.
IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice)
lspci is:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 1854
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41b1
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Regards,
Kirill
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854
2013-10-05 4:06 ` [i915] invert_brightness on 8086:0116:103c:1854 Kirill Tkhai
@ 2013-10-07 7:44 ` Jani Nikula
2013-10-07 12:14 ` Kirill Tkhai
0 siblings, 1 reply; 5+ messages in thread
From: Jani Nikula @ 2013-10-07 7:44 UTC (permalink / raw)
To: Kirill Tkhai, intel-gfx; +Cc: daniel.vetter
On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote:
> Hi,
>
> I've just installed kernel 3.10 on HP 250 G1 and the found option
> invert_brightness is required.
Hi Kirill, thanks for the report. I suspect invert_brightness is not the
right fix, since we've only ever seen that on gen4 Acer based
laptops. Please file a bug on DRM/Intel at [1].
BR,
Jani.
[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
>
> IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice)
>
> lspci is:
> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
> Subsystem: Hewlett-Packard Company Device 1854
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 42
> Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M]
> Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at 4000 [size=64]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: fee0f00c Data: 41b1
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [a4] PCI Advanced Features
> AFCap: TP+ FLR+
> AFCtrl: FLR-
> AFStatus: TP-
> Kernel driver in use: i915
>
> Regards,
> Kirill
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854
2013-10-07 7:44 ` Jani Nikula
@ 2013-10-07 12:14 ` Kirill Tkhai
2013-10-07 13:43 ` Kirill Tkhai
0 siblings, 1 reply; 5+ messages in thread
From: Kirill Tkhai @ 2013-10-07 12:14 UTC (permalink / raw)
To: Jani Nikula, intel-gfx; +Cc: daniel.vetter
07.10.2013, 11:42, "Jani Nikula" <jani.nikula@linux.intel.com>:
> On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote:
>
>> Hi,
>>
>> I've just installed kernel 3.10 on HP 250 G1 and the found option
>> invert_brightness is required.
>
> Hi Kirill, thanks for the report. I suspect invert_brightness is not the
> right fix, since we've only ever seen that on gen4 Acer based
> laptops. Please file a bug on DRM/Intel at [1].
One more detail before I post a BUG.
My screen is black in *console* right after kernel is started unless
the option is passed.
DRI is about XServer as I understand right. Do we mean the same?
>
> BR,
> Jani.
>
> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
>
>> IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice)
>>
>> lspci is:
>> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
>> Subsystem: Hewlett-Packard Company Device 1854
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 42
>> Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M]
>> Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
>> Region 4: I/O ports at 4000 [size=64]
>> Expansion ROM at <unassigned> [disabled]
>> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>> Address: fee0f00c Data: 41b1
>> Capabilities: [d0] Power Management version 2
>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [a4] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel driver in use: i915
>>
>> Regards,
>> Kirill
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854
2013-10-07 12:14 ` Kirill Tkhai
@ 2013-10-07 13:43 ` Kirill Tkhai
2013-10-07 14:45 ` Daniel Vetter
0 siblings, 1 reply; 5+ messages in thread
From: Kirill Tkhai @ 2013-10-07 13:43 UTC (permalink / raw)
To: Jani Nikula, intel-gfx; +Cc: daniel.vetter
07.10.2013, 16:14, "Kirill Tkhai" <tkhai@yandex.ru>:
> 07.10.2013, 11:42, "Jani Nikula" <jani.nikula@linux.intel.com>:
>
>> On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote:
>>> Hi,
>>>
>>> I've just installed kernel 3.10 on HP 250 G1 and the found option
>>> invert_brightness is required.
>> Hi Kirill, thanks for the report. I suspect invert_brightness is not the
>> right fix, since we've only ever seen that on gen4 Acer based
>> laptops. Please file a bug on DRM/Intel at [1].
>
> One more detail before I post a BUG.
>
> My screen is black in *console* right after kernel is started unless
> the option is passed.
>
> DRI is about XServer as I understand right. Do we mean the same?
*if* I understand right :)
>> BR,
>> Jani.
>>
>> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
>>> IDs are 8086:0116:103c:1854 (vendor:device:subvendor:subdevice)
>>>
>>> lspci is:
>>> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
>>> Subsystem: Hewlett-Packard Company Device 1854
>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Latency: 0
>>> Interrupt: pin A routed to IRQ 42
>>> Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M]
>>> Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
>>> Region 4: I/O ports at 4000 [size=64]
>>> Expansion ROM at <unassigned> [disabled]
>>> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>> Address: fee0f00c Data: 41b1
>>> Capabilities: [d0] Power Management version 2
>>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>> Capabilities: [a4] PCI Advanced Features
>>> AFCap: TP+ FLR+
>>> AFCtrl: FLR-
>>> AFStatus: TP-
>>> Kernel driver in use: i915
>>>
>>> Regards,
>>> Kirill
>>> _______________________________________________
>>> Intel-gfx mailing list
>>> Intel-gfx@lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>> --
>> Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [i915] invert_brightness on 8086:0116:103c:1854
2013-10-07 13:43 ` Kirill Tkhai
@ 2013-10-07 14:45 ` Daniel Vetter
0 siblings, 0 replies; 5+ messages in thread
From: Daniel Vetter @ 2013-10-07 14:45 UTC (permalink / raw)
To: Kirill Tkhai; +Cc: daniel.vetter, intel-gfx
On Mon, Oct 07, 2013 at 05:43:11PM +0400, Kirill Tkhai wrote:
>
>
> 07.10.2013, 16:14, "Kirill Tkhai" <tkhai@yandex.ru>:
> > 07.10.2013, 11:42, "Jani Nikula" <jani.nikula@linux.intel.com>:
> >
> >> On Sat, 05 Oct 2013, Kirill Tkhai <tkhai@yandex.ru> wrote:
> >>> Hi,
> >>>
> >>> I've just installed kernel 3.10 on HP 250 G1 and the found option
> >>> invert_brightness is required.
> >> Hi Kirill, thanks for the report. I suspect invert_brightness is not the
> >> right fix, since we've only ever seen that on gen4 Acer based
> >> laptops. Please file a bug on DRM/Intel at [1].
> >
> > One more detail before I post a BUG.
> >
> > My screen is black in *console* right after kernel is started unless
> > the option is passed.
> >
> > DRI is about XServer as I understand right. Do we mean the same?
>
> *if* I understand right :)
DRI is X server, but DR_M_ is the kernel part. Yeah, the linux gfx stack
is a rather complex beast ...
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-10-07 14:45 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <31941380503904@web12m.yandex.ru>
2013-10-05 4:06 ` [i915] invert_brightness on 8086:0116:103c:1854 Kirill Tkhai
2013-10-07 7:44 ` Jani Nikula
2013-10-07 12:14 ` Kirill Tkhai
2013-10-07 13:43 ` Kirill Tkhai
2013-10-07 14:45 ` Daniel Vetter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.