* [GIT PULL] Renesas ARM Based SoC DT Updates for v5.2
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: arm
Cc: Arnd Bergmann, Kevin Hilman, Magnus Damm, linux-renesas-soc,
Olof Johansson, Simon Horman, linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v5.2.
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v5.2
for you to fetch changes up to 0750e8344eb7c48f82a54920172a5d0f78eb223b:
ARM: dts: ape6evm: Reorder bootargs (2019-04-17 17:47:37 +0200)
----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v5.2
* R-Car E2 (r8a7794) based Alt board
- Enable USB and DA9063 PMIC
* R-Car V2H (R8A77920) based Blanche board
- Enable IIC3 and DA9063 PMIC
* RZ/G1C (r8a77470) based iWave SBC
- Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB
* RZ/G1C (r8a77470) SoC
- Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT
* RZ/A1H (R7S7210) based rskrza1 board
- Enable remaining LEDs and I2C
* R-Mobile A1 (r8a7740) based ape6evm,
R-Car H1 (r8a7779) based marzen,
R-Car M1A (R8A7778) based bockw and
Emma Mobile EV2 based kzm9d boads
- Tidy up bootargs
* R-Mobile A1 (r8a7740) based ape6evm
- Enable NOR FLASH
----------------------------------------------------------------
Biju Das (6):
ARM: dts: r8a77470: Add USB PHY DT support
ARM: dts: iwg23s-sbc: Enable USB Phy[01]
ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device
ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host
ARM: dts: r8a77470: Add HSUSB device nodes
ARM: dts: iwg23s-sbc: Enable HS-USB
Cao Van Dong (3):
ARM: dts: r8a77470: Add HSCIF support
ARM: dts: r8a77470: Add PWM support
ARM: dts: r8a77470: Add VIN support
Fabrizio Castro (2):
ARM: dts: r8a77470: Add DU support
ARM: dts: iwg23s-sbc: Add HDMI support
Geert Uytterhoeven (3):
ARM: dts: ape6evm: Add NOR FLASH
ARM: dts: rskrza1: Add I2C support
ARM: dts: rskrza1: Add remaining LEDs
Magnus Damm (4):
ARM: dts: kzm9d: Add rw parameter to bootargs
ARM: dts: bockw: Reorder bootargs
ARM: dts: marzen: Add rw to bootargs and use ip=dhcp
ARM: dts: ape6evm: Reorder bootargs
Marek Vasut (3):
ARM: dts: r8a7792: blanche: Add IIC3 and DA9063 PMIC node
ARM: dts: alt: Add DA9063 PMIC node
ARM: dts: alt: Enable USB support
arch/arm/boot/dts/emev2-kzm9d.dts | 2 +-
arch/arm/boot/dts/r7s72100-rskrza1.dts | 46 ++++-
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 29 ++-
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 123 ++++++++++++
arch/arm/boot/dts/r8a77470.dtsi | 313 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7778-bockw.dts | 2 +-
arch/arm/boot/dts/r8a7779-marzen.dts | 2 +-
arch/arm/boot/dts/r8a7792-blanche.dts | 20 ++
arch/arm/boot/dts/r8a7792.dtsi | 18 ++
arch/arm/boot/dts/r8a7794-alt.dts | 47 +++++
10 files changed, 597 insertions(+), 5 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 48+ messages in thread* [PATCH 01/21] ARM: dts: r8a7792: blanche: Add IIC3 and DA9063 PMIC node
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Marek Vasut, Simon Horman
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Add IIC3 node to R8A7792 SoC device tree and a DA9063 PMIC node
to V2H Blanche board device tree.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7792-blanche.dts | 20 ++++++++++++++++++++
arch/arm/boot/dts/r8a7792.dtsi | 18 ++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index f92301290b02..b6fa80c3b07e 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -308,6 +308,26 @@
};
};
+&iic3 {
+ status = "okay";
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&du {
pinctrl-0 = <&du0_pins &du1_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 8e9eb4b704d3..38fb43d11b27 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -22,6 +22,7 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &iic3;
spi0 = &qspi;
spi1 = &msiof0;
spi2 = &msiof1;
@@ -444,6 +445,23 @@
status = "disabled";
};
+ iic3: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7792",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 01/21] ARM: dts: r8a7792: blanche: Add IIC3 and DA9063 PMIC node
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Marek Vasut
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Add IIC3 node to R8A7792 SoC device tree and a DA9063 PMIC node
to V2H Blanche board device tree.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7792-blanche.dts | 20 ++++++++++++++++++++
arch/arm/boot/dts/r8a7792.dtsi | 18 ++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index f92301290b02..b6fa80c3b07e 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -308,6 +308,26 @@
};
};
+&iic3 {
+ status = "okay";
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&du {
pinctrl-0 = <&du0_pins &du1_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 8e9eb4b704d3..38fb43d11b27 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -22,6 +22,7 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &iic3;
spi0 = &qspi;
spi1 = &msiof0;
spi2 = &msiof1;
@@ -444,6 +445,23 @@
status = "disabled";
};
+ iic3: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7792",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 02/21] ARM: dts: alt: Add DA9063 PMIC node
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Marek Vasut, Simon Horman
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Add DA9063 PMIC node to the I2C bus.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index ef7e2a837df6..e0500ec81569 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -377,6 +377,27 @@
pinctrl-names = "i2c-exio4";
};
+&i2c7 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&vin0 {
status = "okay";
pinctrl-0 = <&vin0_pins>;
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 02/21] ARM: dts: alt: Add DA9063 PMIC node
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Marek Vasut
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Add DA9063 PMIC node to the I2C bus.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index ef7e2a837df6..e0500ec81569 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -377,6 +377,27 @@
pinctrl-names = "i2c-exio4";
};
+&i2c7 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&vin0 {
status = "okay";
pinctrl-0 = <&vin0_pins>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 03/21] ARM: dts: ape6evm: Add NOR FLASH
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the 128 MiB CFI NOR FLASH, which contains the boot loader and
its environment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index d530f451467e..b1e0d556be0a 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -166,6 +166,33 @@
};
&bsc {
+ flash@0 {
+ compatible = "cfi-flash", "mtd-rom";
+ reg = <0x0 0x08000000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x07f80000>;
+ };
+ };
+ };
+
ethernet@8000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x08000000 0x1000>;
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 03/21] ARM: dts: ape6evm: Add NOR FLASH
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Simon Horman, Magnus Damm, Geert Uytterhoeven, linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the 128 MiB CFI NOR FLASH, which contains the boot loader and
its environment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index d530f451467e..b1e0d556be0a 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -166,6 +166,33 @@
};
&bsc {
+ flash@0 {
+ compatible = "cfi-flash", "mtd-rom";
+ reg = <0x0 0x08000000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x07f80000>;
+ };
+ };
+ };
+
ethernet@8000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x08000000 0x1000>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 04/21] ARM: dts: r8a77470: Add DU support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Fabrizio Castro, Simon Horman
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
This commit adds DU support to the RZ/G1C (a.k.a. r8a77470)
specific device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index f4e232bf9d03..493cf2b3f795 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -643,6 +643,38 @@
resets = <&cpg 408>;
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77470";
+ reg = <0 0xfeb00000 0 0x40000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@ff000044 {
compatible = "renesas,prr";
reg = <0 0xff000044 0 4>;
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 04/21] ARM: dts: r8a77470: Add DU support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Fabrizio Castro, Simon Horman, Magnus Damm, linux-arm-kernel
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
This commit adds DU support to the RZ/G1C (a.k.a. r8a77470)
specific device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index f4e232bf9d03..493cf2b3f795 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -643,6 +643,38 @@
resets = <&cpg 408>;
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77470";
+ reg = <0 0xfeb00000 0 0x40000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@ff000044 {
compatible = "renesas,prr";
reg = <0 0xff000044 0 4>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 05/21] ARM: dts: iwg23s-sbc: Add HDMI support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Fabrizio Castro, Simon Horman
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
This patch adds HDMI video output support to the iwg23s board
from iWave. Due to a problem with the bootloader not dealing
with the configuration of one of the pins correctly, we have
to use a gpio-hog for the interrupt line to make sure the pin
is configured as GPIO-input when requesting the interrupt.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 79 +++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 77d18242ef59..9f9eb15a1e65 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -22,6 +22,17 @@
stdout-path = "serial1:115200n8";
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x20000000>;
@@ -80,10 +91,34 @@
status = "okay";
};
+&du {
+ pinctrl-0 = <&du0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+};
+
&extal_clk {
clock-frequency = <20000000>;
};
+&gpio2 {
+ interrupt-fixup {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ line-name = "hdmi-hpd-int";
+ input;
+ };
+};
+
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
@@ -97,12 +132,56 @@
};
};
+&i2c4 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ hdmi@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii_tx_rx";
function = "avb";
};
+ du0_pins: du0 {
+ groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+ function = "du0";
+ };
+
+ i2c4_pins: i2c4 {
+ groups = "i2c4_e";
+ function = "i2c4";
+ };
+
i2c3_pins: i2c3 {
groups = "i2c3_c";
function = "i2c3";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 05/21] ARM: dts: iwg23s-sbc: Add HDMI support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Fabrizio Castro, Simon Horman, Magnus Damm, linux-arm-kernel
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
This patch adds HDMI video output support to the iwg23s board
from iWave. Due to a problem with the bootloader not dealing
with the configuration of one of the pins correctly, we have
to use a gpio-hog for the interrupt line to make sure the pin
is configured as GPIO-input when requesting the interrupt.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 79 +++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 77d18242ef59..9f9eb15a1e65 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -22,6 +22,17 @@
stdout-path = "serial1:115200n8";
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x20000000>;
@@ -80,10 +91,34 @@
status = "okay";
};
+&du {
+ pinctrl-0 = <&du0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+};
+
&extal_clk {
clock-frequency = <20000000>;
};
+&gpio2 {
+ interrupt-fixup {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ line-name = "hdmi-hpd-int";
+ input;
+ };
+};
+
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
@@ -97,12 +132,56 @@
};
};
+&i2c4 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ hdmi@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii_tx_rx";
function = "avb";
};
+ du0_pins: du0 {
+ groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+ function = "du0";
+ };
+
+ i2c4_pins: i2c4 {
+ groups = "i2c4_e";
+ function = "i2c4";
+ };
+
i2c3_pins: i2c3 {
groups = "i2c3_c";
function = "i2c3";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 06/21] ARM: dts: rskrza1: Add I2C support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the I2C bus, and add the following devices:
- Two CAT9554 port expanders (8 GPIOs, interrupt not wired by
default),
- R1EX24016ASAS0A EEPROM.
The bus also contains a MAX9856 Audio Codec, which is not yet supported.
All devices (incl. the audio codec) are documented to support an I2C bus
running at 400 kHz.
Pinctrl is based on the RZ/A BSP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100-rskrza1.dts | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 8ee44a100e9a..60e80ecbbf68 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -47,6 +47,34 @@
clock-frequency = <13330000>;
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ io_expander1: gpio@20 {
+ compatible = "onnn,cat9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ io_expander2: gpio@21 {
+ compatible = "onnn,cat9554";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "renesas,r1ex24016", "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&usb_x1_clk {
clock-frequency = <48000000>;
};
@@ -56,6 +84,11 @@
};
&pinctrl {
+ /* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */
+ i2c3_pins: i2c3 {
+ pinmux = <RZA1_PINMUX(1, 6, 1)>, /* RIIC3SCL */
+ <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */
+ };
/* Serial Console */
scif2_pins: serial2 {
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 06/21] ARM: dts: rskrza1: Add I2C support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Simon Horman, Magnus Damm, Geert Uytterhoeven, linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the I2C bus, and add the following devices:
- Two CAT9554 port expanders (8 GPIOs, interrupt not wired by
default),
- R1EX24016ASAS0A EEPROM.
The bus also contains a MAX9856 Audio Codec, which is not yet supported.
All devices (incl. the audio codec) are documented to support an I2C bus
running at 400 kHz.
Pinctrl is based on the RZ/A BSP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100-rskrza1.dts | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 8ee44a100e9a..60e80ecbbf68 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -47,6 +47,34 @@
clock-frequency = <13330000>;
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ io_expander1: gpio@20 {
+ compatible = "onnn,cat9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ io_expander2: gpio@21 {
+ compatible = "onnn,cat9554";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "renesas,r1ex24016", "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&usb_x1_clk {
clock-frequency = <48000000>;
};
@@ -56,6 +84,11 @@
};
&pinctrl {
+ /* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */
+ i2c3_pins: i2c3 {
+ pinmux = <RZA1_PINMUX(1, 6, 1)>, /* RIIC3SCL */
+ <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */
+ };
/* Serial Console */
scif2_pins: serial2 {
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 07/21] ARM: dts: rskrza1: Add remaining LEDs
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the remaining 3 LEDs, which are driven by the first CAT9554
port expander.
Drop the superfluous status property from the leds node while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100-rskrza1.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 60e80ecbbf68..ff24301dc1be 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -34,12 +34,23 @@
};
leds {
- status = "okay";
compatible = "gpio-leds";
led0 {
gpios = <&port7 1 GPIO_ACTIVE_LOW>;
};
+
+ led1 {
+ gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
+ };
};
};
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 07/21] ARM: dts: rskrza1: Add remaining LEDs
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Simon Horman, Magnus Damm, Geert Uytterhoeven, linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the remaining 3 LEDs, which are driven by the first CAT9554
port expander.
Drop the superfluous status property from the leds node while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100-rskrza1.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 60e80ecbbf68..ff24301dc1be 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -34,12 +34,23 @@
};
leds {
- status = "okay";
compatible = "gpio-leds";
led0 {
gpios = <&port7 1 GPIO_ACTIVE_LOW>;
};
+
+ led1 {
+ gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
+ };
};
};
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 08/21] ARM: dts: alt: Enable USB support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Marek Vasut, Simon Horman
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Add nodes enabling internal PCI controllers to which the internal USB
controllers are connected, add USB PHY node and pinmux nodes.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index e0500ec81569..0ab3d8d57f6d 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -199,6 +199,22 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&usbphy {
+ status = "okay";
+};
+
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
@@ -293,6 +309,16 @@
function = "sdhi1";
power-source = <1800>;
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
};
&cmt0 {
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 08/21] ARM: dts: alt: Enable USB support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Marek Vasut
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Add nodes enabling internal PCI controllers to which the internal USB
controllers are connected, add USB PHY node and pinmux nodes.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index e0500ec81569..0ab3d8d57f6d 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -199,6 +199,22 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&usbphy {
+ status = "okay";
+};
+
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
@@ -293,6 +309,16 @@
function = "sdhi1";
power-source = <1800>;
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
};
&cmt0 {
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 09/21] ARM: dts: r8a77470: Add HSCIF support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Cao Van Dong, Simon Horman
From: Cao Van Dong <cv-dong@jinso.co.jp>
Add hscif{0|1|2} nodes to dtsi for HSCIF support on the
RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 48 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 493cf2b3f795..60bd79fc35f7 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -588,6 +588,54 @@
status = "disabled";
};
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 09/21] ARM: dts: r8a77470: Add HSCIF support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Cao Van Dong, Simon Horman, Magnus Damm, linux-arm-kernel
From: Cao Van Dong <cv-dong@jinso.co.jp>
Add hscif{0|1|2} nodes to dtsi for HSCIF support on the
RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 48 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 493cf2b3f795..60bd79fc35f7 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -588,6 +588,54 @@
status = "disabled";
};
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a77470",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 10/21] ARM: dts: r8a77470: Add PWM support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Cao Van Dong, Simon Horman
From: Cao Van Dong <cv-dong@jinso.co.jp>
Add pwm{0|1|2|3|4|5|6} nodes to dtsi for PWM support on the
RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 70 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 60bd79fc35f7..c9f6e6b11e24 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -636,6 +636,76 @@
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 10/21] ARM: dts: r8a77470: Add PWM support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Cao Van Dong, Simon Horman, Magnus Damm, linux-arm-kernel
From: Cao Van Dong <cv-dong@jinso.co.jp>
Add pwm{0|1|2|3|4|5|6} nodes to dtsi for PWM support on the
RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 70 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 60bd79fc35f7..c9f6e6b11e24 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -636,6 +636,76 @@
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread* Re: [PATCH 10/21] ARM: dts: r8a77470: Add PWM support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-30 13:01 ` Geert Uytterhoeven
-1 siblings, 0 replies; 48+ messages in thread
From: Geert Uytterhoeven @ 2019-04-30 13:01 UTC (permalink / raw)
To: Simon Horman; +Cc: Linux-Renesas, Cao Van Dong, Magnus Damm, Linux ARM
On Fri, Apr 19, 2019 at 4:41 PM Simon Horman <horms+renesas@verge.net.au> wrote:
> From: Cao Van Dong <cv-dong@jinso.co.jp>
>
> Add pwm{0|1|2|3|4|5|6} nodes to dtsi for PWM support on the
> RZ/G1C (r8a77470) SoC.
>
> Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 48+ messages in thread* Re: [PATCH 10/21] ARM: dts: r8a77470: Add PWM support
@ 2019-04-30 13:01 ` Geert Uytterhoeven
0 siblings, 0 replies; 48+ messages in thread
From: Geert Uytterhoeven @ 2019-04-30 13:01 UTC (permalink / raw)
To: Simon Horman; +Cc: Linux-Renesas, Cao Van Dong, Magnus Damm, Linux ARM
On Fri, Apr 19, 2019 at 4:41 PM Simon Horman <horms+renesas@verge.net.au> wrote:
> From: Cao Van Dong <cv-dong@jinso.co.jp>
>
> Add pwm{0|1|2|3|4|5|6} nodes to dtsi for PWM support on the
> RZ/G1C (r8a77470) SoC.
>
> Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 48+ messages in thread
* [PATCH 11/21] ARM: dts: r8a77470: Add VIN support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Cao Van Dong, Simon Horman
From: Cao Van Dong <cv-dong@jinso.co.jp>
Add vin{0|1} nodes to dtsi for VIN support on the RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index c9f6e6b11e24..2e02ff4bd4f7 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -706,6 +706,28 @@
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a77470",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a77470",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 11/21] ARM: dts: r8a77470: Add VIN support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Cao Van Dong, Simon Horman, Magnus Damm, linux-arm-kernel
From: Cao Van Dong <cv-dong@jinso.co.jp>
Add vin{0|1} nodes to dtsi for VIN support on the RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index c9f6e6b11e24..2e02ff4bd4f7 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -706,6 +706,28 @@
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a77470",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a77470",
+ "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 12/21] ARM: dts: r8a77470: Add USB PHY DT support
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Biju Das, Simon Horman
From: Biju Das <biju.das@bp.renesas.com>
Define the r8a77470 generic part of the USB PHY device node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 56 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 2e02ff4bd4f7..eb7c53ed077a 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -325,6 +325,42 @@
status = "disabled";
};
+ usbphy0: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 704>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
+ usbphy1: usb-phy@e6598100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6598100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 706>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ status = "disabled";
+
+ usb1: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
usb_dmac00: dma-controller@e65a0000 {
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
@@ -728,6 +764,26 @@
status = "disabled";
};
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee080200 0 0x700>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0c0200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee0c0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 705>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 12/21] ARM: dts: r8a77470: Add USB PHY DT support
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Biju Das
From: Biju Das <biju.das@bp.renesas.com>
Define the r8a77470 generic part of the USB PHY device node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 56 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 2e02ff4bd4f7..eb7c53ed077a 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -325,6 +325,42 @@
status = "disabled";
};
+ usbphy0: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 704>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
+ usbphy1: usb-phy@e6598100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6598100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 706>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ status = "disabled";
+
+ usb1: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
usb_dmac00: dma-controller@e65a0000 {
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
@@ -728,6 +764,26 @@
status = "disabled";
};
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee080200 0 0x700>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0c0200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee0c0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 705>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 13/21] ARM: dts: iwg23s-sbc: Enable USB Phy[01]
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Biju Das, Simon Horman
From: Biju Das <biju.das@bp.renesas.com>
Enable USB phy[01] on iWave iwg23s sbc based on RZ/G1C SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 32 +++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 9f9eb15a1e65..7ae7ee1ed199 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -214,6 +214,16 @@
function = "sdhi2";
power-source = <1800>;
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
};
&qspi0 {
@@ -274,3 +284,25 @@
sd-uhs-sdr50;
status = "okay";
};
+
+&usb2_phy0 {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usbphy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 13/21] ARM: dts: iwg23s-sbc: Enable USB Phy[01]
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Biju Das
From: Biju Das <biju.das@bp.renesas.com>
Enable USB phy[01] on iWave iwg23s sbc based on RZ/G1C SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 32 +++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 9f9eb15a1e65..7ae7ee1ed199 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -214,6 +214,16 @@
function = "sdhi2";
power-source = <1800>;
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
};
&qspi0 {
@@ -274,3 +284,25 @@
sd-uhs-sdr50;
status = "okay";
};
+
+&usb2_phy0 {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usbphy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 14/21] ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Biju Das, Simon Horman
From: Biju Das <biju.das@bp.renesas.com>
Define the r8a77470 generic part of the USB2.0 Host Controller device
nodes (ehci[01]/ohci[01]).
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 50 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index eb7c53ed077a..0ad1ec092305 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -764,6 +764,31 @@
status = "disabled";
};
+ ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb0 0>, <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb0 0>, <&usb2_phy0>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
usb2_phy0: usb-phy@ee080200 {
compatible = "renesas,usb2-phy-r8a77470";
reg = <0 0xee080200 0 0x700>;
@@ -774,6 +799,31 @@
status = "disabled";
};
+ ohci1: usb@ee0c0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0c0000 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>;
+ phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
+ ehci1: usb@ee0c0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0c0100 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>;
+ phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
usb2_phy1: usb-phy@ee0c0200 {
compatible = "renesas,usb2-phy-r8a77470";
reg = <0 0xee0c0200 0 0x700>;
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 14/21] ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Biju Das
From: Biju Das <biju.das@bp.renesas.com>
Define the r8a77470 generic part of the USB2.0 Host Controller device
nodes (ehci[01]/ohci[01]).
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 50 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index eb7c53ed077a..0ad1ec092305 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -764,6 +764,31 @@
status = "disabled";
};
+ ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb0 0>, <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb0 0>, <&usb2_phy0>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
usb2_phy0: usb-phy@ee080200 {
compatible = "renesas,usb2-phy-r8a77470";
reg = <0 0xee080200 0 0x700>;
@@ -774,6 +799,31 @@
status = "disabled";
};
+ ohci1: usb@ee0c0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0c0000 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>;
+ phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
+ ehci1: usb@ee0c0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0c0100 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>;
+ phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
usb2_phy1: usb-phy@ee0c0200 {
compatible = "renesas,usb2-phy-r8a77470";
reg = <0 0xee0c0200 0 0x700>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 15/21] ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Biju Das, Simon Horman
From: Biju Das <biju.das@bp.renesas.com>
Enable USB2.0 host on the iwg23s sbc.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 7ae7ee1ed199..366832cc92bc 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -106,6 +106,10 @@
};
};
+&ehci1 {
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <20000000>;
};
@@ -166,6 +170,10 @@
};
};
+&ohci1 {
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii_tx_rx";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 15/21] ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Biju Das
From: Biju Das <biju.das@bp.renesas.com>
Enable USB2.0 host on the iwg23s sbc.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 7ae7ee1ed199..366832cc92bc 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -106,6 +106,10 @@
};
};
+&ehci1 {
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <20000000>;
};
@@ -166,6 +170,10 @@
};
};
+&ohci1 {
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii_tx_rx";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 16/21] ARM: dts: r8a77470: Add HSUSB device nodes
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Biju Das, Simon Horman
From: Biju Das <biju.das@bp.renesas.com>
Define the r8a77470 generic part of the HSUSB0/1 device nodes.
Currently the renesas_usbhs driver doesn't handle multiple phys and we
don't have a proper hardware to validate such driver changes.
So for hsusb1 it is assumed that usbphy0 will be enabled by either
channel0 host or device.
In future, if any boards support hsusb1, we will need to add multiple phy
support in the renesas_usbhs driver and override the board dts to enable
the same.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 0ad1ec092305..56cb10b42ed9 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -325,6 +325,23 @@
status = "disabled";
};
+ hsusb0: hsusb@e6590000 {
+ compatible = "renesas,usbhs-r8a77470",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac00 0>, <&usb_dmac00 1>,
+ <&usb_dmac10 0>, <&usb_dmac10 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
usbphy0: usb-phy@e6590100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
@@ -343,6 +360,24 @@
};
};
+ hsusb1: hsusb@e6598000 {
+ compatible = "renesas,usbhs-r8a77470",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6598000 0 0x100>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 706>;
+ dmas = <&usb_dmac01 0>, <&usb_dmac01 1>,
+ <&usb_dmac11 0>, <&usb_dmac11 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <4>;
+ /* We need to turn on usbphy0 to make usbphy1 to work */
+ phys = <&usb1 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ status = "disabled";
+ };
+
usbphy1: usb-phy@e6598100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 16/21] ARM: dts: r8a77470: Add HSUSB device nodes
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Biju Das
From: Biju Das <biju.das@bp.renesas.com>
Define the r8a77470 generic part of the HSUSB0/1 device nodes.
Currently the renesas_usbhs driver doesn't handle multiple phys and we
don't have a proper hardware to validate such driver changes.
So for hsusb1 it is assumed that usbphy0 will be enabled by either
channel0 host or device.
In future, if any boards support hsusb1, we will need to add multiple phy
support in the renesas_usbhs driver and override the board dts to enable
the same.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470.dtsi | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 0ad1ec092305..56cb10b42ed9 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -325,6 +325,23 @@
status = "disabled";
};
+ hsusb0: hsusb@e6590000 {
+ compatible = "renesas,usbhs-r8a77470",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac00 0>, <&usb_dmac00 1>,
+ <&usb_dmac10 0>, <&usb_dmac10 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
usbphy0: usb-phy@e6590100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
@@ -343,6 +360,24 @@
};
};
+ hsusb1: hsusb@e6598000 {
+ compatible = "renesas,usbhs-r8a77470",
+ "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6598000 0 0x100>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 706>;
+ dmas = <&usb_dmac01 0>, <&usb_dmac01 1>,
+ <&usb_dmac11 0>, <&usb_dmac11 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <4>;
+ /* We need to turn on usbphy0 to make usbphy1 to work */
+ phys = <&usb1 1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ status = "disabled";
+ };
+
usbphy1: usb-phy@e6598100 {
compatible = "renesas,usb-phy-r8a77470",
"renesas,rcar-gen2-usb-phy";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 17/21] ARM: dts: iwg23s-sbc: Enable HS-USB
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Biju Das, Simon Horman
From: Biju Das <biju.das@bp.renesas.com>
Enable HS-USB device for the iWave SBC based on RZ/G1C.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 366832cc92bc..2840eb0d6fd4 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -123,6 +123,10 @@
};
};
+&hsusb0 {
+ status = "okay";
+};
+
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 17/21] ARM: dts: iwg23s-sbc: Enable HS-USB
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Simon Horman, Magnus Damm, linux-arm-kernel, Biju Das
From: Biju Das <biju.das@bp.renesas.com>
Enable HS-USB device for the iWave SBC based on RZ/G1C.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 366832cc92bc..2840eb0d6fd4 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -123,6 +123,10 @@
};
};
+&hsusb0 {
+ status = "okay";
+};
+
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 18/21] ARM: dts: kzm9d: Add rw parameter to bootargs
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Magnus Damm, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Add rw as bootargs parameter to make the KZM9D board bootargs match other
boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/emev2-kzm9d.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 1bb8e5c9d029..abfff54d6de5 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial1:115200n8";
};
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 18/21] ARM: dts: kzm9d: Add rw parameter to bootargs
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Magnus Damm, Magnus Damm, linux-arm-kernel, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Add rw as bootargs parameter to make the KZM9D board bootargs match other
boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/emev2-kzm9d.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 1bb8e5c9d029..abfff54d6de5 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial1:115200n8";
};
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 19/21] ARM: dts: bockw: Reorder bootargs
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Magnus Damm, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Reorder bootargs parameters to make the BockW board bootargs match other
boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778-bockw.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index cecb22924ec4..0b49956069fc 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 19/21] ARM: dts: bockw: Reorder bootargs
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Magnus Damm, Magnus Damm, linux-arm-kernel, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Reorder bootargs parameters to make the BockW board bootargs match other
boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778-bockw.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index cecb22924ec4..0b49956069fc 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 20/21] ARM: dts: marzen: Add rw to bootargs and use ip=dhcp
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Magnus Damm, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Add rw as bootargs parameter and change from ip=on to ip=dhcp to make the
Marzen board bootargs match other boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index abc14e7a4c93..d4bee1ec9044 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 20/21] ARM: dts: marzen: Add rw to bootargs and use ip=dhcp
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Magnus Damm, Magnus Damm, linux-arm-kernel, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Add rw as bootargs parameter and change from ip=on to ip=dhcp to make the
Marzen board bootargs match other boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index abc14e7a4c93..d4bee1ec9044 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PATCH 21/21] ARM: dts: ape6evm: Reorder bootargs
2019-04-19 14:34 ` Simon Horman
@ 2019-04-19 14:34 ` Simon Horman
-1 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Magnus Damm, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Reorder bootargs parameters to make the APE6EVM board bootargs match other
boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index b1e0d556be0a..f70f4a3e5c43 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
--
2.11.0
^ permalink raw reply related [flat|nested] 48+ messages in thread* [PATCH 21/21] ARM: dts: ape6evm: Reorder bootargs
@ 2019-04-19 14:34 ` Simon Horman
0 siblings, 0 replies; 48+ messages in thread
From: Simon Horman @ 2019-04-19 14:34 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Magnus Damm, Magnus Damm, linux-arm-kernel, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
Reorder bootargs parameters to make the APE6EVM board bootargs match other
boards from Renesas. No need to be special.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index b1e0d556be0a..f70f4a3e5c43 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: [GIT PULL] Renesas ARM Based SoC DT Updates for v5.2
2019-04-19 14:34 ` Simon Horman
@ 2019-04-28 19:46 ` Olof Johansson
-1 siblings, 0 replies; 48+ messages in thread
From: Olof Johansson @ 2019-04-28 19:46 UTC (permalink / raw)
To: Simon Horman
Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm
On Fri, Apr 19, 2019 at 04:34:47PM +0200, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC DT updates for v5.2.
>
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v5.2
>
> for you to fetch changes up to 0750e8344eb7c48f82a54920172a5d0f78eb223b:
>
> ARM: dts: ape6evm: Reorder bootargs (2019-04-17 17:47:37 +0200)
>
> ----------------------------------------------------------------
> Renesas ARM Based SoC DT Updates for v5.2
>
> * R-Car E2 (r8a7794) based Alt board
> - Enable USB and DA9063 PMIC
>
> * R-Car V2H (R8A77920) based Blanche board
> - Enable IIC3 and DA9063 PMIC
>
> * RZ/G1C (r8a77470) based iWave SBC
> - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB
>
> * RZ/G1C (r8a77470) SoC
> - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT
>
> * RZ/A1H (R7S7210) based rskrza1 board
> - Enable remaining LEDs and I2C
>
> * R-Mobile A1 (r8a7740) based ape6evm,
> R-Car H1 (r8a7779) based marzen,
> R-Car M1A (R8A7778) based bockw and
> Emma Mobile EV2 based kzm9d boads
> - Tidy up bootargs
>
> * R-Mobile A1 (r8a7740) based ape6evm
> - Enable NOR FLASH
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [GIT PULL] Renesas ARM Based SoC DT Updates for v5.2
@ 2019-04-28 19:46 ` Olof Johansson
0 siblings, 0 replies; 48+ messages in thread
From: Olof Johansson @ 2019-04-28 19:46 UTC (permalink / raw)
To: Simon Horman
Cc: Arnd Bergmann, Kevin Hilman, Magnus Damm, linux-renesas-soc, arm,
linux-arm-kernel
On Fri, Apr 19, 2019 at 04:34:47PM +0200, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC DT updates for v5.2.
>
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v5.2
>
> for you to fetch changes up to 0750e8344eb7c48f82a54920172a5d0f78eb223b:
>
> ARM: dts: ape6evm: Reorder bootargs (2019-04-17 17:47:37 +0200)
>
> ----------------------------------------------------------------
> Renesas ARM Based SoC DT Updates for v5.2
>
> * R-Car E2 (r8a7794) based Alt board
> - Enable USB and DA9063 PMIC
>
> * R-Car V2H (R8A77920) based Blanche board
> - Enable IIC3 and DA9063 PMIC
>
> * RZ/G1C (r8a77470) based iWave SBC
> - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB
>
> * RZ/G1C (r8a77470) SoC
> - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT
>
> * RZ/A1H (R7S7210) based rskrza1 board
> - Enable remaining LEDs and I2C
>
> * R-Mobile A1 (r8a7740) based ape6evm,
> R-Car H1 (r8a7779) based marzen,
> R-Car M1A (R8A7778) based bockw and
> Emma Mobile EV2 based kzm9d boads
> - Tidy up bootargs
>
> * R-Mobile A1 (r8a7740) based ape6evm
> - Enable NOR FLASH
Merged, thanks!
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 48+ messages in thread