[PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Andy Shevchenko]

The small set of cleanups against bytcr_rt5651 board file.

In v2:
- added commit message to patch 2 (Joe, Pierre)
- added cover letter (Pierre)
- added Hans to Cc list (Hans)

Andy Shevchenko (4):
  ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
  ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
  ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
  ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
    saturation

 sound/soc/intel/boards/bytcr_rt5651.c | 118 +++++++++++---------------
 1 file changed, 50 insertions(+), 68 deletions(-)

-- 
2.33.0

[PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Andy Shevchenko]

The small set of cleanups against bytcr_rt5651 board file.

In v2:
- added commit message to patch 2 (Joe, Pierre)
- added cover letter (Pierre)
- added Hans to Cc list (Hans)

Andy Shevchenko (4):
  ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
  ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
  ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
  ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
    saturation

 sound/soc/intel/boards/bytcr_rt5651.c | 118 +++++++++++---------------
 1 file changed, 50 insertions(+), 68 deletions(-)

-- 
2.33.0

[PATCH v2 1/4] ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()

[Andy Shevchenko]

Access to platform data via dev_get_platdata() getter to make code cleaner.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 00c347b52863..2335cca17cc8 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -894,9 +894,10 @@ struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
 
 static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	static const char * const mic_name[] = { "dmic", "in1", "in2", "in12" };
+	struct snd_soc_acpi_mach *mach = dev_get_platdata(dev);
 	struct byt_rt5651_private *priv;
-	struct snd_soc_acpi_mach *mach;
 	const char *platform_name;
 	struct acpi_device *adev;
 	struct device *codec_dev;
@@ -912,8 +913,6 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 
 	/* register the soc card */
 	byt_rt5651_card.dev = &pdev->dev;
-
-	mach = byt_rt5651_card.dev->platform_data;
 	snd_soc_card_set_drvdata(&byt_rt5651_card, priv);
 
 	/* fix index of codec dai */
-- 
2.33.0

[PATCH v2 1/4] ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()

[Andy Shevchenko]

Access to platform data via dev_get_platdata() getter to make code cleaner.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 00c347b52863..2335cca17cc8 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -894,9 +894,10 @@ struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
 
 static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	static const char * const mic_name[] = { "dmic", "in1", "in2", "in12" };
+	struct snd_soc_acpi_mach *mach = dev_get_platdata(dev);
 	struct byt_rt5651_private *priv;
-	struct snd_soc_acpi_mach *mach;
 	const char *platform_name;
 	struct acpi_device *adev;
 	struct device *codec_dev;
@@ -912,8 +913,6 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 
 	/* register the soc card */
 	byt_rt5651_card.dev = &pdev->dev;
-
-	mach = byt_rt5651_card.dev->platform_data;
 	snd_soc_card_set_drvdata(&byt_rt5651_card, priv);
 
 	/* fix index of codec dai */
-- 
2.33.0

[PATCH v2 2/4] ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device

[Andy Shevchenko]

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 42 ++++++++++++---------------
 1 file changed, 18 insertions(+), 24 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 2335cca17cc8..36f63516f0cb 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -907,12 +907,12 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	int dai_index = 0;
 	int i;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	/* register the soc card */
-	byt_rt5651_card.dev = &pdev->dev;
+	byt_rt5651_card.dev = dev;
 	snd_soc_card_set_drvdata(&byt_rt5651_card, priv);
 
 	/* fix index of codec dai */
@@ -932,7 +932,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		put_device(&adev->dev);
 		byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name;
 	} else {
-		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
+		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
 		return -ENXIO;
 	}
 
@@ -980,13 +980,13 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 							       &pkg_ctx);
 		if (pkg_found) {
 			if (chan_package.aif_value == 1) {
-				dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
+				dev_info(dev, "BIOS Routing: AIF1 connected\n");
 				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1;
 			} else  if (chan_package.aif_value == 2) {
-				dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n");
+				dev_info(dev, "BIOS Routing: AIF2 connected\n");
 				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2;
 			} else {
-				dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n");
+				dev_info(dev, "BIOS Routing isn't valid, ignored\n");
 				pkg_found = false;
 			}
 		}
@@ -1001,7 +1001,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	dmi_check_system(byt_rt5651_quirk_table);
 
 	if (quirk_override != -1) {
-		dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n",
+		dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n",
 			 byt_rt5651_quirk, quirk_override);
 		byt_rt5651_quirk = quirk_override;
 	}
@@ -1017,8 +1017,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 
 	if (byt_rt5651_gpios) {
 		devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios);
-		priv->ext_amp_gpio = devm_fwnode_gpiod_get(&pdev->dev,
-							   codec_dev->fwnode,
+		priv->ext_amp_gpio = devm_fwnode_gpiod_get(dev, codec_dev->fwnode,
 							   "ext-amp-enable",
 							   GPIOD_OUT_LOW,
 							   "speaker-amp");
@@ -1029,15 +1028,13 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 				priv->ext_amp_gpio = NULL;
 				break;
 			default:
-				dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n",
-					ret_val);
+				dev_err(dev, "Failed to get ext-amp-enable GPIO: %d\n", ret_val);
 				fallthrough;
 			case -EPROBE_DEFER:
 				goto err;
 			}
 		}
-		priv->hp_detect = devm_fwnode_gpiod_get(&pdev->dev,
-							codec_dev->fwnode,
+		priv->hp_detect = devm_fwnode_gpiod_get(dev, codec_dev->fwnode,
 							"hp-detect",
 							GPIOD_IN,
 							"hp-detect");
@@ -1048,8 +1045,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 				priv->hp_detect = NULL;
 				break;
 			default:
-				dev_err(&pdev->dev, "Failed to get hp-detect GPIO: %d\n",
-					ret_val);
+				dev_err(dev, "Failed to get hp-detect GPIO: %d\n", ret_val);
 				fallthrough;
 			case -EPROBE_DEFER:
 				goto err;
@@ -1057,7 +1053,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		}
 	}
 
-	log_quirks(&pdev->dev);
+	log_quirks(dev);
 
 	if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) ||
 	    (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2))
@@ -1068,10 +1064,10 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";
 
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+		priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
 			ret_val = PTR_ERR(priv->mclk);
-			dev_err(&pdev->dev,
+			dev_err(dev,
 				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
 				ret_val);
 			/*
@@ -1111,7 +1107,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	if (ret_val)
 		goto err;
 
-	sof_parent = snd_soc_acpi_sof_parent(&pdev->dev);
+	sof_parent = snd_soc_acpi_sof_parent(dev);
 
 	/* set card and driver name */
 	if (sof_parent) {
@@ -1124,13 +1120,11 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 
 	/* set pm ops */
 	if (sof_parent)
-		pdev->dev.driver->pm = &snd_soc_pm_ops;
-
-	ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card);
+		dev->driver->pm = &snd_soc_pm_ops;
 
+	ret_val = devm_snd_soc_register_card(dev, &byt_rt5651_card);
 	if (ret_val) {
-		dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
-			ret_val);
+		dev_err(dev, "devm_snd_soc_register_card failed %d\n", ret_val);
 		goto err;
 	}
 	platform_set_drvdata(pdev, &byt_rt5651_card);
-- 
2.33.0

[PATCH v2 2/4] ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device

[Andy Shevchenko]

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 42 ++++++++++++---------------
 1 file changed, 18 insertions(+), 24 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 2335cca17cc8..36f63516f0cb 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -907,12 +907,12 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	int dai_index = 0;
 	int i;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	/* register the soc card */
-	byt_rt5651_card.dev = &pdev->dev;
+	byt_rt5651_card.dev = dev;
 	snd_soc_card_set_drvdata(&byt_rt5651_card, priv);
 
 	/* fix index of codec dai */
@@ -932,7 +932,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		put_device(&adev->dev);
 		byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name;
 	} else {
-		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
+		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
 		return -ENXIO;
 	}
 
@@ -980,13 +980,13 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 							       &pkg_ctx);
 		if (pkg_found) {
 			if (chan_package.aif_value == 1) {
-				dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
+				dev_info(dev, "BIOS Routing: AIF1 connected\n");
 				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1;
 			} else  if (chan_package.aif_value == 2) {
-				dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n");
+				dev_info(dev, "BIOS Routing: AIF2 connected\n");
 				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2;
 			} else {
-				dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n");
+				dev_info(dev, "BIOS Routing isn't valid, ignored\n");
 				pkg_found = false;
 			}
 		}
@@ -1001,7 +1001,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	dmi_check_system(byt_rt5651_quirk_table);
 
 	if (quirk_override != -1) {
-		dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n",
+		dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n",
 			 byt_rt5651_quirk, quirk_override);
 		byt_rt5651_quirk = quirk_override;
 	}
@@ -1017,8 +1017,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 
 	if (byt_rt5651_gpios) {
 		devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios);
-		priv->ext_amp_gpio = devm_fwnode_gpiod_get(&pdev->dev,
-							   codec_dev->fwnode,
+		priv->ext_amp_gpio = devm_fwnode_gpiod_get(dev, codec_dev->fwnode,
 							   "ext-amp-enable",
 							   GPIOD_OUT_LOW,
 							   "speaker-amp");
@@ -1029,15 +1028,13 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 				priv->ext_amp_gpio = NULL;
 				break;
 			default:
-				dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n",
-					ret_val);
+				dev_err(dev, "Failed to get ext-amp-enable GPIO: %d\n", ret_val);
 				fallthrough;
 			case -EPROBE_DEFER:
 				goto err;
 			}
 		}
-		priv->hp_detect = devm_fwnode_gpiod_get(&pdev->dev,
-							codec_dev->fwnode,
+		priv->hp_detect = devm_fwnode_gpiod_get(dev, codec_dev->fwnode,
 							"hp-detect",
 							GPIOD_IN,
 							"hp-detect");
@@ -1048,8 +1045,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 				priv->hp_detect = NULL;
 				break;
 			default:
-				dev_err(&pdev->dev, "Failed to get hp-detect GPIO: %d\n",
-					ret_val);
+				dev_err(dev, "Failed to get hp-detect GPIO: %d\n", ret_val);
 				fallthrough;
 			case -EPROBE_DEFER:
 				goto err;
@@ -1057,7 +1053,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		}
 	}
 
-	log_quirks(&pdev->dev);
+	log_quirks(dev);
 
 	if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) ||
 	    (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2))
@@ -1068,10 +1064,10 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";
 
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+		priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
 			ret_val = PTR_ERR(priv->mclk);
-			dev_err(&pdev->dev,
+			dev_err(dev,
 				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
 				ret_val);
 			/*
@@ -1111,7 +1107,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	if (ret_val)
 		goto err;
 
-	sof_parent = snd_soc_acpi_sof_parent(&pdev->dev);
+	sof_parent = snd_soc_acpi_sof_parent(dev);
 
 	/* set card and driver name */
 	if (sof_parent) {
@@ -1124,13 +1120,11 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 
 	/* set pm ops */
 	if (sof_parent)
-		pdev->dev.driver->pm = &snd_soc_pm_ops;
-
-	ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card);
+		dev->driver->pm = &snd_soc_pm_ops;
 
+	ret_val = devm_snd_soc_register_card(dev, &byt_rt5651_card);
 	if (ret_val) {
-		dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
-			ret_val);
+		dev_err(dev, "devm_snd_soc_register_card failed %d\n", ret_val);
 		goto err;
 	}
 	platform_set_drvdata(pdev, &byt_rt5651_card);
-- 
2.33.0

[PATCH v2 3/4] ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk

[Andy Shevchenko]

The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 69 ++++++++++++---------------
 1 file changed, 30 insertions(+), 39 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 36f63516f0cb..28c561302e69 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -188,13 +188,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 	}
 
 	if (SND_SOC_DAPM_EVENT_ON(event)) {
-		if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-			ret = clk_prepare_enable(priv->mclk);
-			if (ret < 0) {
-				dev_err(card->dev,
-					"could not configure MCLK state");
-				return ret;
-			}
+		ret = clk_prepare_enable(priv->mclk);
+		if (ret < 0) {
+			dev_err(card->dev, "could not configure MCLK state");
+			return ret;
 		}
 		ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50);
 	} else {
@@ -207,8 +204,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 					     48000 * 512,
 					     SND_SOC_CLOCK_IN);
 		if (!ret)
-			if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
-				clk_disable_unprepare(priv->mclk);
+			clk_disable_unprepare(priv->mclk);
 	}
 
 	if (ret < 0) {
@@ -629,29 +625,25 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 		return ret;
 	}
 
-	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		/*
-		 * The firmware might enable the clock at
-		 * boot (this information may or may not
-		 * be reflected in the enable clock register).
-		 * To change the rate we must disable the clock
-		 * first to cover these cases. Due to common
-		 * clock framework restrictions that do not allow
-		 * to disable a clock that has not been enabled,
-		 * we need to enable the clock first.
-		 */
-		ret = clk_prepare_enable(priv->mclk);
-		if (!ret)
-			clk_disable_unprepare(priv->mclk);
+	/*
+	 * The firmware might enable the clock at boot (this information
+	 * may or may not be reflected in the enable clock register).
+	 * To change the rate we must disable the clock first to cover
+	 * these cases. Due to common clock framework restrictions that
+	 * do not allow to disable a clock that has not been enabled,
+	 * we need to enable the clock first.
+	 */
+	ret = clk_prepare_enable(priv->mclk);
+	if (!ret)
+		clk_disable_unprepare(priv->mclk);
 
-		if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
-			ret = clk_set_rate(priv->mclk, 25000000);
-		else
-			ret = clk_set_rate(priv->mclk, 19200000);
+	if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
+		ret = clk_set_rate(priv->mclk, 25000000);
+	else
+		ret = clk_set_rate(priv->mclk, 19200000);
 
-		if (ret)
-			dev_err(card->dev, "unable to set MCLK rate\n");
-	}
+	if (ret)
+		dev_err(card->dev, "unable to set MCLK rate\n");
 
 	report = 0;
 	if (BYT_RT5651_JDSRC(byt_rt5651_quirk))
@@ -1064,21 +1056,20 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";
 
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
+		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
 			ret_val = PTR_ERR(priv->mclk);
 			dev_err(dev,
 				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
 				ret_val);
-			/*
-			 * Fall back to bit clock usage for -ENOENT (clock not
-			 * available likely due to missing dependencies), bail
-			 * for all other errors, including -EPROBE_DEFER
-			 */
-			if (ret_val != -ENOENT)
-				goto err;
-			byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
+			goto err;
 		}
+		/*
+		 * Fall back to bit clock usage when clock is not
+		 * available likely due to missing dependencies.
+		 */
+		if (!priv->mclk)
+			byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
 	}
 
 	snprintf(byt_rt5651_components, sizeof(byt_rt5651_components),
-- 
2.33.0

[PATCH v2 3/4] ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk

[Andy Shevchenko]

The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 69 ++++++++++++---------------
 1 file changed, 30 insertions(+), 39 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 36f63516f0cb..28c561302e69 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -188,13 +188,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 	}
 
 	if (SND_SOC_DAPM_EVENT_ON(event)) {
-		if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-			ret = clk_prepare_enable(priv->mclk);
-			if (ret < 0) {
-				dev_err(card->dev,
-					"could not configure MCLK state");
-				return ret;
-			}
+		ret = clk_prepare_enable(priv->mclk);
+		if (ret < 0) {
+			dev_err(card->dev, "could not configure MCLK state");
+			return ret;
 		}
 		ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50);
 	} else {
@@ -207,8 +204,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 					     48000 * 512,
 					     SND_SOC_CLOCK_IN);
 		if (!ret)
-			if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
-				clk_disable_unprepare(priv->mclk);
+			clk_disable_unprepare(priv->mclk);
 	}
 
 	if (ret < 0) {
@@ -629,29 +625,25 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 		return ret;
 	}
 
-	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		/*
-		 * The firmware might enable the clock at
-		 * boot (this information may or may not
-		 * be reflected in the enable clock register).
-		 * To change the rate we must disable the clock
-		 * first to cover these cases. Due to common
-		 * clock framework restrictions that do not allow
-		 * to disable a clock that has not been enabled,
-		 * we need to enable the clock first.
-		 */
-		ret = clk_prepare_enable(priv->mclk);
-		if (!ret)
-			clk_disable_unprepare(priv->mclk);
+	/*
+	 * The firmware might enable the clock at boot (this information
+	 * may or may not be reflected in the enable clock register).
+	 * To change the rate we must disable the clock first to cover
+	 * these cases. Due to common clock framework restrictions that
+	 * do not allow to disable a clock that has not been enabled,
+	 * we need to enable the clock first.
+	 */
+	ret = clk_prepare_enable(priv->mclk);
+	if (!ret)
+		clk_disable_unprepare(priv->mclk);
 
-		if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
-			ret = clk_set_rate(priv->mclk, 25000000);
-		else
-			ret = clk_set_rate(priv->mclk, 19200000);
+	if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
+		ret = clk_set_rate(priv->mclk, 25000000);
+	else
+		ret = clk_set_rate(priv->mclk, 19200000);
 
-		if (ret)
-			dev_err(card->dev, "unable to set MCLK rate\n");
-	}
+	if (ret)
+		dev_err(card->dev, "unable to set MCLK rate\n");
 
 	report = 0;
 	if (BYT_RT5651_JDSRC(byt_rt5651_quirk))
@@ -1064,21 +1056,20 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";
 
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
+		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
 			ret_val = PTR_ERR(priv->mclk);
 			dev_err(dev,
 				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
 				ret_val);
-			/*
-			 * Fall back to bit clock usage for -ENOENT (clock not
-			 * available likely due to missing dependencies), bail
-			 * for all other errors, including -EPROBE_DEFER
-			 */
-			if (ret_val != -ENOENT)
-				goto err;
-			byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
+			goto err;
 		}
+		/*
+		 * Fall back to bit clock usage when clock is not
+		 * available likely due to missing dependencies.
+		 */
+		if (!priv->mclk)
+			byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
 	}
 
 	snprintf(byt_rt5651_components, sizeof(byt_rt5651_components),
-- 
2.33.0

[PATCH v2 4/4] ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log saturation

[Andy Shevchenko]

dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 28c561302e69..5e9c53dadbc7 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -1058,10 +1058,8 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
 		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
-			ret_val = PTR_ERR(priv->mclk);
-			dev_err(dev,
-				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
-				ret_val);
+			ret_val = dev_err_probe(dev, PTR_ERR(priv->mclk),
+						"Failed to get MCLK from pmc_plt_clk_3\n");
 			goto err;
 		}
 		/*
-- 
2.33.0

[PATCH v2 4/4] ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log saturation

[Andy Shevchenko]

dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 28c561302e69..5e9c53dadbc7 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -1058,10 +1058,8 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
 		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
-			ret_val = PTR_ERR(priv->mclk);
-			dev_err(dev,
-				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
-				ret_val);
+			ret_val = dev_err_probe(dev, PTR_ERR(priv->mclk),
+						"Failed to get MCLK from pmc_plt_clk_3\n");
 			goto err;
 		}
 		/*
-- 
2.33.0

Re: [PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Hans de Goede]

Hi,

On 10/7/21 7:02 PM, Andy Shevchenko wrote:
> The small set of cleanups against bytcr_rt5651 board file.
> 
> In v2:
> - added commit message to patch 2 (Joe, Pierre)
> - added cover letter (Pierre)
> - added Hans to Cc list (Hans)
> 
> Andy Shevchenko (4):
>   ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
>   ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
>   ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
>   ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
>     saturation

Thanks, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans

Re: [PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Hans de Goede]

Hi,

On 10/7/21 7:02 PM, Andy Shevchenko wrote:
> The small set of cleanups against bytcr_rt5651 board file.
> 
> In v2:
> - added commit message to patch 2 (Joe, Pierre)
> - added cover letter (Pierre)
> - added Hans to Cc list (Hans)
> 
> Andy Shevchenko (4):
>   ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
>   ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
>   ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
>   ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
>     saturation

Thanks, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans

Re: [PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Pierre-Louis Bossart]

>> Andy Shevchenko (4):
>>   ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
>>   ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
>>   ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
>>   ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
>>     saturation
> 
> Thanks, the entire series looks good to me:
> 
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> 
> for the series.

Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

Re: [PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Pierre-Louis Bossart]

>> Andy Shevchenko (4):
>>   ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
>>   ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
>>   ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
>>   ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
>>     saturation
> 
> Thanks, the entire series looks good to me:
> 
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> 
> for the series.

Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

Re: [PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Mark Brown]

On Thu, 7 Oct 2021 20:02:46 +0300, Andy Shevchenko wrote:
> The small set of cleanups against bytcr_rt5651 board file.
> 
> In v2:
> - added commit message to patch 2 (Joe, Pierre)
> - added cover letter (Pierre)
> - added Hans to Cc list (Hans)
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/4] ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
      commit: 0c465e7a8ea26f4ad52dd9548f22afdaf6e039a5
[2/4] ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
      commit: 269da8f7626b1de69998fe1a0c0e069749d18a28
[3/4] ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
      commit: a8627df5491e00e23d4f2e648ff796adbfa23cc5
[4/4] ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log saturation
      commit: 45c5dc45d80d41596bc0364fafc523648e6124d8

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH v2 0/4] ASoC: Intel: bytcr_rt5651: few cleanups

[Mark Brown]

On Thu, 7 Oct 2021 20:02:46 +0300, Andy Shevchenko wrote:
> The small set of cleanups against bytcr_rt5651 board file.
> 
> In v2:
> - added commit message to patch 2 (Joe, Pierre)
> - added cover letter (Pierre)
> - added Hans to Cc list (Hans)
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/4] ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
      commit: 0c465e7a8ea26f4ad52dd9548f22afdaf6e039a5
[2/4] ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
      commit: 269da8f7626b1de69998fe1a0c0e069749d18a28
[3/4] ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
      commit: a8627df5491e00e23d4f2e648ff796adbfa23cc5
[4/4] ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log saturation
      commit: 45c5dc45d80d41596bc0364fafc523648e6124d8

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark