[PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Sankeerth Billakanti]

This series adds support for the eDP PHY on Qualcomm SC7280 platform.
The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135

Sankeerth Billakanti (3):
  dt-bindings: phy: Add eDP PHY compatible for sc7280
  phy: qcom: Add support for eDP PHY on sc7280
  phy: qcom: Program SSC only if supported by sink

 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml | 4 +++-
 drivers/phy/qualcomm/phy-qcom-edp.c                     | 9 ++++++---
 2 files changed, 9 insertions(+), 4 deletions(-)

-- 
2.7.4

[PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Sankeerth Billakanti]

This series adds support for the eDP PHY on Qualcomm SC7280 platform.
The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135

Sankeerth Billakanti (3):
  dt-bindings: phy: Add eDP PHY compatible for sc7280
  phy: qcom: Add support for eDP PHY on sc7280
  phy: qcom: Program SSC only if supported by sink

 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml | 4 +++-
 drivers/phy/qualcomm/phy-qcom-edp.c                     | 9 ++++++---
 2 files changed, 9 insertions(+), 4 deletions(-)

-- 
2.7.4

[PATCH v1 1/3] dt-bindings: phy: Add eDP PHY compatible for sc7280

[Sankeerth Billakanti]

Add compatible string for the supported eDP PHY on sc7280 platform.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index 9076e19..a5850ff 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -16,7 +16,9 @@ description:
 
 properties:
   compatible:
-    const: qcom,sc8180x-edp-phy
+    enum:
+      - qcom,sc7280-edp-phy
+      - qcom,sc8180x-edp-phy
 
   reg:
     items:
-- 
2.7.4

[PATCH v1 1/3] dt-bindings: phy: Add eDP PHY compatible for sc7280

[Sankeerth Billakanti]

Add compatible string for the supported eDP PHY on sc7280 platform.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index 9076e19..a5850ff 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -16,7 +16,9 @@ description:
 
 properties:
   compatible:
-    const: qcom,sc8180x-edp-phy
+    enum:
+      - qcom,sc7280-edp-phy
+      - qcom,sc8180x-edp-phy
 
   reg:
     items:
-- 
2.7.4

[PATCH v1 2/3] phy: qcom: Add support for eDP PHY on sc7280

[Sankeerth Billakanti]

The sc7280 platform supports native eDP controller and PHY.
This change will add support for the eDP PHY on sc7280.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 17d5653..6d9404d 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -654,6 +654,7 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_edp_phy_match_table[] = {
+	{ .compatible = "qcom,sc7280-edp-phy" },
 	{ .compatible = "qcom,sc8180x-edp-phy" },
 	{ }
 };
-- 
2.7.4

[PATCH v1 2/3] phy: qcom: Add support for eDP PHY on sc7280

[Sankeerth Billakanti]

The sc7280 platform supports native eDP controller and PHY.
This change will add support for the eDP PHY on sc7280.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 17d5653..6d9404d 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -654,6 +654,7 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_edp_phy_match_table[] = {
+	{ .compatible = "qcom,sc7280-edp-phy" },
 	{ .compatible = "qcom,sc8180x-edp-phy" },
 	{ }
 };
-- 
2.7.4

[PATCH v1 3/3] phy: qcom: Program SSC only if supported by sink

[Sankeerth Billakanti]

Some legacy eDP sinks may not support SSC. The support for SSC is
indicated through an opts flag from the controller driver. This
change will enable SSC only if the sink supports it.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 6d9404d..06ba609 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -335,9 +335,11 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	writel(0x00, edp->tx0 + TXn_LANE_MODE_1);
 	writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
 
-	ret = qcom_edp_configure_ssc(edp);
-	if (ret)
-		return ret;
+	if (edp->dp_opts.ssc) {
+		ret = qcom_edp_configure_ssc(edp);
+		if (ret)
+			return ret;
+	}
 
 	ret = qcom_edp_configure_pll(edp);
 	if (ret)
-- 
2.7.4

[PATCH v1 3/3] phy: qcom: Program SSC only if supported by sink

[Sankeerth Billakanti]

Some legacy eDP sinks may not support SSC. The support for SSC is
indicated through an opts flag from the controller driver. This
change will enable SSC only if the sink supports it.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 6d9404d..06ba609 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -335,9 +335,11 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	writel(0x00, edp->tx0 + TXn_LANE_MODE_1);
 	writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
 
-	ret = qcom_edp_configure_ssc(edp);
-	if (ret)
-		return ret;
+	if (edp->dp_opts.ssc) {
+		ret = qcom_edp_configure_ssc(edp);
+		if (ret)
+			return ret;
+	}
 
 	ret = qcom_edp_configure_pll(edp);
 	if (ret)
-- 
2.7.4

Re: [PATCH v1 1/3] dt-bindings: phy: Add eDP PHY compatible for sc7280

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:36)
> Add compatible string for the supported eDP PHY on sc7280 platform.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v1 1/3] dt-bindings: phy: Add eDP PHY compatible for sc7280

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:36)
> Add compatible string for the supported eDP PHY on sc7280 platform.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v1 2/3] phy: qcom: Add support for eDP PHY on sc7280

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:37)
> The sc7280 platform supports native eDP controller and PHY.
> This change will add support for the eDP PHY on sc7280.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v1 2/3] phy: qcom: Add support for eDP PHY on sc7280

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:37)
> The sc7280 platform supports native eDP controller and PHY.
> This change will add support for the eDP PHY on sc7280.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v1 3/3] phy: qcom: Program SSC only if supported by sink

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:38)
> Some legacy eDP sinks may not support SSC. The support for SSC is
> indicated through an opts flag from the controller driver. This
> change will enable SSC only if the sink supports it.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---

I suppose as long as the existing user has already chosen to set the
opts in the controller driver then this is fine.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v1 3/3] phy: qcom: Program SSC only if supported by sink

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:38)
> Some legacy eDP sinks may not support SSC. The support for SSC is
> indicated through an opts flag from the controller driver. This
> change will enable SSC only if the sink supports it.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---

I suppose as long as the existing user has already chosen to set the
opts in the controller driver then this is fine.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:35)
> This series adds support for the eDP PHY on Qualcomm SC7280 platform.
> The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
> https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135
>
> Sankeerth Billakanti (3):
>   dt-bindings: phy: Add eDP PHY compatible for sc7280
>   phy: qcom: Add support for eDP PHY on sc7280
>   phy: qcom: Program SSC only if supported by sink

This series was sent to the wrong maintainers. It's in the phy
framework, not the drm framework. Please use scripts/get_maintainers.pl
to find the right email addresses and send this series again.

Re: [PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:35)
> This series adds support for the eDP PHY on Qualcomm SC7280 platform.
> The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
> https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135
>
> Sankeerth Billakanti (3):
>   dt-bindings: phy: Add eDP PHY compatible for sc7280
>   phy: qcom: Add support for eDP PHY on sc7280
>   phy: qcom: Program SSC only if supported by sink

This series was sent to the wrong maintainers. It's in the phy
framework, not the drm framework. Please use scripts/get_maintainers.pl
to find the right email addresses and send this series again.

Re: [PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Stephen Boyd]

Quoting Sankeerth Billakanti (2021-11-15 23:07:35)
> This series adds support for the eDP PHY on Qualcomm SC7280 platform.
> The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
> https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135
>
> Sankeerth Billakanti (3):
>   dt-bindings: phy: Add eDP PHY compatible for sc7280
>   phy: qcom: Add support for eDP PHY on sc7280
>   phy: qcom: Program SSC only if supported by sink

This series was sent to the wrong maintainers. It's in the phy
framework, not the drm framework. Please use scripts/get_maintainers.pl
to find the right email addresses and send this series again.

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Doug Anderson]

Hi,

On Wed, Feb 2, 2022 at 1:54 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Sankeerth Billakanti (2021-11-15 23:07:35)
> > This series adds support for the eDP PHY on Qualcomm SC7280 platform.
> > The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
> > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135
> >
> > Sankeerth Billakanti (3):
> >   dt-bindings: phy: Add eDP PHY compatible for sc7280
> >   phy: qcom: Add support for eDP PHY on sc7280
> >   phy: qcom: Program SSC only if supported by sink
>
> This series was sent to the wrong maintainers. It's in the phy
> framework, not the drm framework. Please use scripts/get_maintainers.pl
> to find the right email addresses and send this series again.

To help out, I've re-posted this myself, hopefully getting all the
correct maintainers.

https://lore.kernel.org/r/20220208001704.367069-1-dianders@chromium.org

Re: [PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Doug Anderson]

Hi,

On Wed, Feb 2, 2022 at 1:54 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Sankeerth Billakanti (2021-11-15 23:07:35)
> > This series adds support for the eDP PHY on Qualcomm SC7280 platform.
> > The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
> > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135
> >
> > Sankeerth Billakanti (3):
> >   dt-bindings: phy: Add eDP PHY compatible for sc7280
> >   phy: qcom: Add support for eDP PHY on sc7280
> >   phy: qcom: Program SSC only if supported by sink
>
> This series was sent to the wrong maintainers. It's in the phy
> framework, not the drm framework. Please use scripts/get_maintainers.pl
> to find the right email addresses and send this series again.

To help out, I've re-posted this myself, hopefully getting all the
correct maintainers.

https://lore.kernel.org/r/20220208001704.367069-1-dianders@chromium.org

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v1 0/3] Add support for eDP PHY on SC7280 platform

[Doug Anderson]

Hi,

On Wed, Feb 2, 2022 at 1:54 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Sankeerth Billakanti (2021-11-15 23:07:35)
> > This series adds support for the eDP PHY on Qualcomm SC7280 platform.
> > The changes are dependent on v4 of the new eDP PHY driver introduced by Bjorn:
> > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=575135
> >
> > Sankeerth Billakanti (3):
> >   dt-bindings: phy: Add eDP PHY compatible for sc7280
> >   phy: qcom: Add support for eDP PHY on sc7280
> >   phy: qcom: Program SSC only if supported by sink
>
> This series was sent to the wrong maintainers. It's in the phy
> framework, not the drm framework. Please use scripts/get_maintainers.pl
> to find the right email addresses and send this series again.

To help out, I've re-posted this myself, hopefully getting all the
correct maintainers.

https://lore.kernel.org/r/20220208001704.367069-1-dianders@chromium.org