[PATCH v3 00/11] arm64: dts: qcom: Add support for SM8450 SoC and

[PATCH v3 00/11] arm64: dts: qcom: Add support for SM8450 SoC and

[Vinod Koul]

Snapdragon 8 Gen 1 Mobile Platform [1] (SM8450) is the latest Qualcomm SoC
announced today.

This series adds the DTS support including clocks, tlmm, smmu, regulators,
ufs, interconnects, pmics and cpufreq found in the SM8450 QRD board.

[1]: https://www.qualcomm.com/products/snapdragon-8-gen-1-mobile-platform

Changes in v3:
 - drop spmi and icc patches
 - add the tags recieved

Changes in v2:
 - add the acks recieved
 - move gpio header include to soc dts
 - fix the uart node name
 - rework pinctrol nodes
 - drop cpu clusters
 - fix consistency in nodes for reserved mem and icc
 - Squash some patches into qrd dts patches

Dmitry Baryshkov (2):
  arm64: dts: qcom: sm8450: Add rpmhpd node
  arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes

Vinod Koul (8):
  arm64: dts: qcom: Add base SM8450 DTSI
  arm64: dts: qcom: sm8450: Add tlmm nodes
  arm64: dts: qcom: sm8450: Add reserved memory nodes
  arm64: dts: qcom: sm8450: add smmu nodes
  arm64: dts: qcom: Add base SM8450 QRD DTS
  arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
  arm64: dts: qcom: sm8450: add ufs nodes
  arm64: dts: qcom: sm8450-qrd: enable ufs nodes

Vladimir Zapolskiy (1):
  arm64: dts: qcom: sm8450: add cpufreq support

 arch/arm64/boot/dts/qcom/Makefile       |    1 +
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts |  375 +++++++++
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 1026 +++++++++++++++++++++++
 3 files changed, 1402 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450-qrd.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450.dtsi

-- 
2.31.1

[PATCH v3 01/11] arm64: dts: qcom: Add base SM8450 DTSI

[Vinod Koul]

This add based DTSI for SM8450 SoC and includes base description of
CPUs, GCC, RPMHCC, UART, interuupt-controller which helps to boot to
shell with console on boards with this SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 476 +++++++++++++++++++++++++++
 1 file changed, 476 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
new file mode 100644
index 000000000000..96fbf4be3f89
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sm8450.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <76800000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <274>;
+				exit-latency-us = <480>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <327>;
+				exit-latency-us = <1502>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-l3-off";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <584>;
+				exit-latency-us = <2332>;
+				min-residency-us = <6118>;
+				local-timer-stop;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-power-collapse";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2893>;
+				exit-latency-us = <4023>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8450", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8450";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8450-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17421000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17421000 0x0 0x1000>,
+				      <0x0 0x17422000 0x0 0x1000>;
+			};
+
+			frame@17423000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17423000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17425000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17427000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17429000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>,
+			      <0x0 0x17a30000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
+					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8450-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
-- 
2.31.1

[PATCH v3 02/11] arm64: dts: qcom: sm8450: Add tlmm nodes

[Vinod Koul]

Add tlmm node found in SM8450 SoC and uart pin configuration

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 96fbf4be3f89..fb93d53d3433 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -343,6 +343,8 @@ uart7: serial@99c000 {
 				reg = <0 0x0099c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -366,6 +368,32 @@ pdc: interrupt-controller@b220000 {
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8450-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 211>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx {
+				pins = "gpio26";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx {
+				pins = "gpio27";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17100000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
-- 
2.31.1

[PATCH v3 03/11] arm64: dts: qcom: sm8450: Add reserved memory nodes

[Vinod Koul]

Add the reserved memory nodes for SM8450. This is based on the downstream
documentation.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 221 +++++++++++++++++++++++++++
 1 file changed, 221 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index fb93d53d3433..d9439c6ebfa2 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -310,6 +310,227 @@ CLUSTER_PD: cpu-cluster0 {
 		};
 	};
 
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: memory@80640000 {
+			reg = <0x0 0x80640000 0x0 0x180000>;
+			no-map;
+		};
+
+		xbl_sc_mem: memory@807c0000 {
+			reg = <0x0 0x807c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		aop_image_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: memory@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: memory@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: memory@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: memory@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		/* secdata region can be reused by apps */
+		smem: memory@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x4600000>;
+			no-map;
+		};
+
+		camera_mem: memory@85200000 {
+			reg = <0x0 0x85200000 0x0 0x500000>;
+			no-map;
+		};
+
+		video_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x2100000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88000000 {
+			reg = <0x0 0x88000000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@89900000 {
+			reg = <0x0 0x89900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@8b910000 {
+			reg = <0x0 0x8b910000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: memory@8b91a000 {
+			reg = <0x0 0x8b91a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: memory@8ba00000 {
+			reg = <0x0 0x8ba00000 0x0 0x180000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: memory@8bb80000 {
+			reg = <0x0 0x8bb80000 0x0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: memory@8bbe0000 {
+			reg = <0x0 0x8bbe0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x13200000>;
+			no-map;
+		};
+
+		cvp_mem: memory@9ee00000 {
+			reg = <0x0 0x9ee00000 0x0 0x700000>;
+			no-map;
+		};
+
+		global_sync_mem: memory@a6f00000 {
+			reg = <0x0 0xa6f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* uefi region can be reused by APPS */
+
+		/* Linux kernel image is loaded at 0xa0000000 */
+
+		oem_vm_mem: memory@bb000000 {
+			reg = <0x0 0xbb000000 0x0 0x5000000>;
+			no-map;
+		};
+
+		mte_mem: memory@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x20000000>;
+			no-map;
+		};
+
+		qheebsp_reserved_mem: memory@e0000000 {
+			reg = <0x0 0xe0000000 0x0 0x600000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: memory@e0600000 {
+			reg = <0x0 0xe0600000 0x0 0x400000>;
+			no-map;
+		};
+
+		hyp_reserved_mem: memory@e0a00000 {
+			reg = <0x0 0xe0a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: memory@e0b00000 {
+			reg = <0x0 0xe0b00000 0x0 0x4af3000>;
+			no-map;
+		};
+
+		trust_ui_vm_qrtr: memory@e55f3000 {
+			reg = <0x0 0xe55f3000 0x0 0x9000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk0_ring: memory@e55fc000 {
+			reg = <0x0 0xe55fc000 0x0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_swiotlb: memory@e5600000 {
+			reg = <0x0 0xe5600000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: memory@e8800000 {
+			reg = <0x0 0xe8800000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: memory@e8900000 {
+			reg = <0x0 0xe8900000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: memory@e9b00000 {
+			reg = <0x0 0xe9b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: memory@ea000000 {
+			reg = <0x0 0xea000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		trusted_apps_ext_mem: memory@ed900000 {
+			reg = <0x0 0xed900000 0x0 0x3b00000>;
+			no-map;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.31.1

[PATCH v3 04/11] arm64: dts: qcom: sm8450: add smmu nodes

[Vinod Koul]

Add the apps smmu node as found in the SM8450 SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 103 +++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d9439c6ebfa2..d29680c405bf 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -615,6 +615,109 @@ qup_uart7_tx: qup-uart7-tx {
 			};
 		};
 
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts =    <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		intc: interrupt-controller@17100000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
-- 
2.31.1

[PATCH v3 05/11] arm64: dts: qcom: Add base SM8450 QRD DTS

[Vinod Koul]

Add DTS for Qualcomm QRD platform which uses SM8450 SoC and mark the
reserved nodes.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/Makefile       |  1 +
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 33 +++++++++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450-qrd.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6b816eb33309..9b37261484cf 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -107,3 +107,4 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
new file mode 100644
index 000000000000..8dcd41c4e5ab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8450 QRD";
+	compatible = "qcom,sm8450-qrd", "qcom,sm8450";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <36 4>;
+};
+
+&uart7 {
+	status = "okay";
+};
-- 
2.31.1

[PATCH v3 06/11] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes

[Vinod Koul]

Add the RPMH regulators found in QRD-SM8450 platform

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 322 ++++++++++++++++++++++++
 1 file changed, 322 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 8dcd41c4e5ab..2ab19608a455 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8450.dtsi"
 
 / {
@@ -18,6 +19,327 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	pm8350-rpmh-regulators {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>;
+		vdd-l8-supply = <&vreg_s2h_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_l1b_0p91: ldo1 {
+			regulator-name = "vreg_l1b_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p5: ldo7 {
+			regulator-name = "vreg_l7b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-rpmh-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8450-rpmh-regulators {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		vreg_s2h_0p95: smps2 {
+			regulator-name = "vreg_s2h_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s3h_0p5: smps3 {
+			regulator-name = "vreg_s3h_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <500000>;
+		};
+
+		vreg_l2h_0p91: ldo2 {
+			regulator-name = "vreg_l2h_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3h_0p91: ldo3 {
+			regulator-name = "vreg_l3h_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	pmr735a-rpmh-regulators {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_l1e_0p8: ldo1 {
+			regulator-name = "vreg_l1e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-name = "vreg_l5e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l6e_1p2: ldo6 {
+			regulator-name = "vreg_l6e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
 };
 
 &qupv3_id_0 {
-- 
2.31.1

[PATCH v3 07/11] arm64: dts: qcom: sm8450: add ufs nodes

[Vinod Koul]

Add the UFS and QMP PHY node for SM8450 SoC

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 72 ++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d29680c405bf..9556d2fc46e0 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -815,6 +815,78 @@ rpmhcc: clock-controller {
 				clocks = <&xo_board>;
 			};
 		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8450-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0xe10>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref", "ref_aux", "qref";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_0_CLKREF_EN>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: lanes@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+			};
+		};
 	};
 
 	timer {
-- 
2.31.1

[PATCH v3 08/11] arm64: dts: qcom: sm8450-qrd: enable ufs nodes

[Vinod Koul]

Enable the UFS and phy node and add the regulators used by them.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 2ab19608a455..4b7ad190d538 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -353,3 +353,23 @@ &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p5>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <1200000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+	vdda-max-microamp = <173000>;
+	vdda-pll-max-microamp = <24900>;
+};
-- 
2.31.1

[PATCH v3 09/11] arm64: dts: qcom: sm8450: Add rpmhpd node

[Vinod Koul]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

This adds RPMH power domain found in SM8450 SoC

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 51 ++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9556d2fc46e0..8fff4d54933f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -814,6 +815,56 @@ rpmhcc: clock-controller {
 				clock-names = "xo";
 				clocks = <&xo_board>;
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
 		};
 
 		ufs_mem_hc: ufshc@1d84000 {
-- 
2.31.1

[PATCH v3 10/11] arm64: dts: qcom: sm8450: add cpufreq support

[Vinod Koul]

From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

The change adds a description of a SM8450 cpufreq-epss controller and
references to it from CPU nodes.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 8fff4d54933f..56e3e8f771bd 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -44,6 +44,7 @@ CPU0: cpu@0 {
 			next-level-cache = <&L2_0>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -61,6 +62,7 @@ CPU1: cpu@100 {
 			next-level-cache = <&L2_100>;
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -75,6 +77,7 @@ CPU2: cpu@200 {
 			next-level-cache = <&L2_200>;
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -89,6 +92,7 @@ CPU3: cpu@300 {
 			next-level-cache = <&L2_300>;
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -103,6 +107,7 @@ CPU4: cpu@400 {
 			next-level-cache = <&L2_400>;
 			power-domains = <&CPU_PD4>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -117,6 +122,7 @@ CPU5: cpu@500 {
 			next-level-cache = <&L2_500>;
 			power-domains = <&CPU_PD5>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -132,6 +138,7 @@ CPU6: cpu@600 {
 			next-level-cache = <&L2_600>;
 			power-domains = <&CPU_PD6>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -146,6 +153,7 @@ CPU7: cpu@700 {
 			next-level-cache = <&L2_700>;
 			power-domains = <&CPU_PD7>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -867,6 +875,21 @@ rpmhpd_opp_turbo_l1: opp10 {
 			};
 		};
 
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-- 
2.31.1

[PATCH v3 11/11] arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes

[Vinod Koul]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add device tree nodes for two i2c blocks: i2c13 and i2c14.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 52 ++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 56e3e8f771bd..62082ed5335d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -582,6 +582,44 @@ uart7: serial@99c000 {
 			};
 		};
 
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -609,6 +647,20 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			qup_i2c13_data_clk: qup-i2c13-data-clk {
+				pins = "gpio48", "gpio49";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk {
+				pins = "gpio52", "gpio53";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			qup_uart7_rx: qup-uart7-rx {
 				pins = "gpio26";
 				function = "qup7";
-- 
2.31.1

Re: [PATCH v3 00/11] arm64: dts: qcom: Add support for SM8450 SoC and

[Bjorn Andersson]

On Wed, 15 Dec 2021 10:04:29 +0530, Vinod Koul wrote:
> Snapdragon 8 Gen 1 Mobile Platform [1] (SM8450) is the latest Qualcomm SoC
> announced today.
> 
> This series adds the DTS support including clocks, tlmm, smmu, regulators,
> ufs, interconnects, pmics and cpufreq found in the SM8450 QRD board.
> 
> [1]: https://www.qualcomm.com/products/snapdragon-8-gen-1-mobile-platform
> 
> [...]

Applied, thanks!

[01/11] arm64: dts: qcom: Add base SM8450 DTSI
        commit: 5188049c9b36d718124e2cce91803a26a34a0ad6
[02/11] arm64: dts: qcom: sm8450: Add tlmm nodes
        commit: ec950d55728459248e78f5c70ab3e3c2f7c22e38
[03/11] arm64: dts: qcom: sm8450: Add reserved memory nodes
        commit: 285f97bc4b017b013d273a69ba3ee12252990812
[04/11] arm64: dts: qcom: sm8450: add smmu nodes
        commit: 892d5395396d5515c42e502810884225776b3b10
[05/11] arm64: dts: qcom: Add base SM8450 QRD DTS
        commit: 24de05c38e6bfe80fccc3b632c142accfaa7232d
[06/11] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
        commit: 128914ad230354ab4af9c3b86fdce2147f467553
[07/11] arm64: dts: qcom: sm8450: add ufs nodes
        commit: 07fa917a335e139a108e94085c6beac3098e3874
[08/11] arm64: dts: qcom: sm8450-qrd: enable ufs nodes
        commit: 8f8f98c881686d21fc937f469d3a198f2f9bb9ba
[09/11] arm64: dts: qcom: sm8450: Add rpmhpd node
        commit: 61eba74e473ed4cd64ec17440092f4a98913cda3
[10/11] arm64: dts: qcom: sm8450: add cpufreq support
        commit: 015a89f0d317dce4d2174059155c2fc39db7cbc8
[11/11] arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
        commit: bf0a257a9418ebcbe6ab2a73728f76969942e52a

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>