* [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
@ 2021-12-16 16:40 Alexandre Ghiti
2021-12-16 16:40 ` [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML Alexandre Ghiti
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Alexandre Ghiti @ 2021-12-16 16:40 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Adam Thomson, Support Opensource,
Lee Jones, Liam Girdwood, Mark Brown, Alessandro Zummo,
Alexandre Belloni, Wim Van Sebroeck, Guenter Roeck, linux-input,
devicetree, linux-kernel, linux-rtc, linux-watchdog
Cc: Alexandre Ghiti
The device described is the "DA9063", not "DA9093", so fix this typo.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
---
Documentation/devicetree/bindings/mfd/da9063.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
index 8da879935c59..91b79a21d403 100644
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ b/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -1,6 +1,6 @@
* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-DA9093 consists of a large and varied group of sub-devices (I2C Only):
+DA9063 consists of a large and varied group of sub-devices (I2C Only):
Device Supply Names Description
------ ------------ -----------
--
2.32.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML
2021-12-16 16:40 [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" Alexandre Ghiti
@ 2021-12-16 16:40 ` Alexandre Ghiti
2021-12-16 16:49 ` Mark Brown
2021-12-17 3:47 ` Rob Herring
2021-12-21 17:00 ` [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" Rob Herring
2021-12-29 15:27 ` Lee Jones
2 siblings, 2 replies; 6+ messages in thread
From: Alexandre Ghiti @ 2021-12-16 16:40 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Adam Thomson, Support Opensource,
Lee Jones, Liam Girdwood, Mark Brown, Alessandro Zummo,
Alexandre Belloni, Wim Van Sebroeck, Guenter Roeck, linux-input,
devicetree, linux-kernel, linux-rtc, linux-watchdog
Cc: Alexandre Ghiti
DA9063 devices bindings used text format, so migrate those bindings to YAML
format before adding any new bindings.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
---
Changes in v2:
- Fix all errors detected with make dt_binding_checks
.../bindings/input/da9063-onkey.yaml | 39 ++++++
.../devicetree/bindings/mfd/da9063.txt | 111 ------------------
.../devicetree/bindings/mfd/da9063.yaml | 105 +++++++++++++++++
.../bindings/regulator/da9063-regulator.yaml | 51 ++++++++
.../devicetree/bindings/rtc/da9063-rtc.yaml | 31 +++++
.../bindings/watchdog/da9063-watchdog.yaml | 31 +++++
6 files changed, 257 insertions(+), 111 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/da9063-onkey.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
create mode 100644 Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
diff --git a/Documentation/devicetree/bindings/input/da9063-onkey.yaml b/Documentation/devicetree/bindings/input/da9063-onkey.yaml
new file mode 100644
index 000000000000..e49f69f7aaac
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/da9063-onkey.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/da9063-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OnKey driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The OnKey controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines the OnKey settings for controlling the key
+ functionality of the device. The node should contain the compatible property
+ with the value "dlg,da9063-onkey".
+
+properties:
+ compatible:
+ const: dlg,da9063-onkey
+
+ dlg,disable-key-power:
+ description: |
+ Disable power-down using a long key-press. If this
+ entry exists the OnKey driver will remove support for the KEY_POWER key
+ press. If this entry does not exist then by default the key-press
+ triggered power down is enabled and the OnKey will support both KEY_POWER
+ and KEY_SLEEP.
+ type: boolean
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
deleted file mode 100644
index 91b79a21d403..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9063 consists of a large and varied group of sub-devices (I2C Only):
-
-Device Supply Names Description
------- ------------ -----------
-da9063-regulator : : LDOs & BUCKs
-da9063-onkey : : On Key
-da9063-rtc : : Real-Time Clock (DA9063 only)
-da9063-watchdog : : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
- modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
- The DA9063(L) regulators are bound using their names listed below:
-
- bcore1 : BUCK CORE1
- bcore2 : BUCK CORE2
- bpro : BUCK PRO
- bmem : BUCK MEM
- bio : BUCK IO
- bperi : BUCK PERI
- ldo1 : LDO_1 (DA9063 only)
- ldo2 : LDO_2 (DA9063 only)
- ldo3 : LDO_3
- ldo4 : LDO_4 (DA9063 only)
- ldo5 : LDO_5 (DA9063 only)
- ldo6 : LDO_6 (DA9063 only)
- ldo7 : LDO_7
- ldo8 : LDO_8
- ldo9 : LDO_9
- ldo10 : LDO_10 (DA9063 only)
- ldo11 : LDO_11
-
- The component follows the standard regulator framework and the bindings
- details of individual regulator device can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
- the DA9063 only. The RTC is not present in DA9063L. There are currently
- no entries in this binding, however compatible = "dlg,da9063-rtc" should
- be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
- functionality of the device. The node should contain the compatible property
- with the value "dlg,da9063-onkey".
-
- Optional onkey properties:
-
- - dlg,disable-key-power : Disable power-down using a long key-press. If this
- entry exists the OnKey driver will remove support for the KEY_POWER key
- press. If this entry does not exist then by default the key-press
- triggered power down is enabled and the OnKey will support both KEY_POWER
- and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
- with the DA9063 and DA9063L. There are currently no entries in this
- binding, however compatible = "dlg,da9063-watchdog" should be added
- if a node is created.
-
-
-Example:
-
- pmic0: da9063@58 {
- compatible = "dlg,da9063"
- reg = <0x58>;
- interrupt-parent = <&gpio6>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
-
- onkey {
- compatible = "dlg,da9063-onkey";
- dlg,disable-key-power;
- };
-
- regulators {
- DA9063_BCORE1: bcore1 {
- regulator-name = "BCORE1";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <500000>;
- regulator-max-microamp = <2000000>;
- regulator-boot-on;
- };
- DA9063_LDO11: ldo11 {
- regulator-name = "LDO_11";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <3600000>;
- regulator-boot-on;
- };
- };
- };
-
diff --git a/Documentation/devicetree/bindings/mfd/da9063.yaml b/Documentation/devicetree/bindings/mfd/da9063.yaml
new file mode 100644
index 000000000000..62a8df68bf3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9063.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+ DA9063 consists of a large and varied group of sub-devices (I2C Only):
+
+ Device Supply Names Description
+ ------ ------------ -----------
+ da9063-regulator : : LDOs & BUCKs
+ da9063-onkey : : On Key
+ da9063-rtc : : Real-Time Clock (DA9063 only)
+ da9063-watchdog : : Watchdog
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - dlg,da9063
+ - dlg,da9063l
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ regulators:
+ $ref: ../regulator/da9063-regulator.yaml
+
+ onkey:
+ $ref: ../input/da9063-onkey.yaml
+
+ rtc:
+ $ref: ../rtc/da9063-rtc.yaml
+
+ watchdog:
+ $ref: ../watchdog/da9063-watchdog.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c1 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ pmic0: da9063@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ dlg,disable-key-power;
+ };
+
+ regulators {
+ DA9063_BCORE1: bcore1 {
+ regulator-name = "BCORE1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <2000000>;
+ regulator-boot-on;
+ };
+ DA9063_LDO11: ldo11 {
+ regulator-name = "LDO_11";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/da9063-regulator.yaml b/Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
new file mode 100644
index 000000000000..0180b3684c0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/da9063-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines the settings for the LDOs and BUCKs.
+ The DA9063(L) regulators are bound using their names listed below:
+
+ bcore1 : BUCK CORE1
+ bcore2 : BUCK CORE2
+ bpro : BUCK PRO
+ bmem : BUCK MEM
+ bio : BUCK IO
+ bperi : BUCK PERI
+ ldo1 : LDO_1 (DA9063 only)
+ ldo2 : LDO_2 (DA9063 only)
+ ldo3 : LDO_3
+ ldo4 : LDO_4 (DA9063 only)
+ ldo5 : LDO_5 (DA9063 only)
+ ldo6 : LDO_6 (DA9063 only)
+ ldo7 : LDO_7
+ ldo8 : LDO_8
+ ldo9 : LDO_9
+ ldo10 : LDO_10 (DA9063 only)
+ ldo11 : LDO_11
+
+ The component follows the standard regulator framework and the bindings
+ details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+properties:
+ compatible:
+ const: dlg,da9063-regulator
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/rtc/da9063-rtc.yaml b/Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
new file mode 100644
index 000000000000..3db1a9e5b572
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/da9063-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTC driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <support.opensource@diasemi.com>
+
+description:
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The RTC controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines settings for the Real-Time Clock associated with
+ the DA9063 only. The RTC is not present in DA9063L. There are currently
+ no entries in this binding, however compatible = "dlg,da9063-rtc" should
+ be added if a node is created.
+
+properties:
+ compatible:
+ const: dlg,da9063-rtc
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml b/Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
new file mode 100644
index 000000000000..d3286f4c04d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/da9063-watchdog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <support.opensource@diasemi.com>
+
+description: |
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The watchdog controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines settings for the Watchdog timer associated
+ with the DA9063 and DA9063L. There are currently no entries in this
+ binding, however compatible = "dlg,da9063-watchdog" should be added
+ if a node is created.
+
+properties:
+ compatible:
+ const: dlg,da9063-watchdog
+
+required:
+ - compatible
+
+additionalProperties: false
--
2.32.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML
2021-12-16 16:40 ` [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML Alexandre Ghiti
@ 2021-12-16 16:49 ` Mark Brown
2021-12-17 3:47 ` Rob Herring
1 sibling, 0 replies; 6+ messages in thread
From: Mark Brown @ 2021-12-16 16:49 UTC (permalink / raw)
To: Alexandre Ghiti
Cc: Dmitry Torokhov, Rob Herring, Adam Thomson, Support Opensource,
Lee Jones, Liam Girdwood, Alessandro Zummo, Alexandre Belloni,
Wim Van Sebroeck, Guenter Roeck, linux-input, devicetree,
linux-kernel, linux-rtc, linux-watchdog
[-- Attachment #1: Type: text/plain, Size: 227 bytes --]
On Thu, Dec 16, 2021 at 05:40:37PM +0100, Alexandre Ghiti wrote:
> DA9063 devices bindings used text format, so migrate those bindings to YAML
> format before adding any new bindings.
Acked-by: Mark Brown <broonie@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML
2021-12-16 16:40 ` [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML Alexandre Ghiti
2021-12-16 16:49 ` Mark Brown
@ 2021-12-17 3:47 ` Rob Herring
1 sibling, 0 replies; 6+ messages in thread
From: Rob Herring @ 2021-12-17 3:47 UTC (permalink / raw)
To: Alexandre Ghiti
Cc: Lee Jones, linux-rtc, linux-input, Wim Van Sebroeck,
Dmitry Torokhov, Liam Girdwood, Support Opensource, Mark Brown,
Alexandre Belloni, linux-kernel, linux-watchdog,
Alessandro Zummo, devicetree, Rob Herring, Adam Thomson,
Guenter Roeck
On Thu, 16 Dec 2021 17:40:37 +0100, Alexandre Ghiti wrote:
> DA9063 devices bindings used text format, so migrate those bindings to YAML
> format before adding any new bindings.
>
> Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
> ---
>
> Changes in v2:
> - Fix all errors detected with make dt_binding_checks
>
> .../bindings/input/da9063-onkey.yaml | 39 ++++++
> .../devicetree/bindings/mfd/da9063.txt | 111 ------------------
> .../devicetree/bindings/mfd/da9063.yaml | 105 +++++++++++++++++
> .../bindings/regulator/da9063-regulator.yaml | 51 ++++++++
> .../devicetree/bindings/rtc/da9063-rtc.yaml | 31 +++++
> .../bindings/watchdog/da9063-watchdog.yaml | 31 +++++
> 6 files changed, 257 insertions(+), 111 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/da9063-onkey.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml
> create mode 100644 Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
> create mode 100644 Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
> create mode 100644 Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/da9063.example.dt.yaml: da9063@58: 'interrupt-controller', 'onkey', 'regulators', 'rtc', 'wdt' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/trivial-devices.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/da9063.example.dt.yaml: da9063@58: regulators: 'compatible' is a required property
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/da9063.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/da9063.example.dt.yaml: da9063@58: regulators: 'bcore1', 'ldo11' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/da9063.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/da9063.example.dt.yaml: da9063@58: 'wdt' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/da9063.yaml
doc reference errors (make refcheckdocs):
Documentation/devicetree/bindings/input/da9062-onkey.txt: Documentation/devicetree/bindings/mfd/da9063.txt
See https://patchwork.ozlabs.org/patch/1569315
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
2021-12-16 16:40 [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" Alexandre Ghiti
2021-12-16 16:40 ` [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML Alexandre Ghiti
@ 2021-12-21 17:00 ` Rob Herring
2021-12-29 15:27 ` Lee Jones
2 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2021-12-21 17:00 UTC (permalink / raw)
To: Alexandre Ghiti
Cc: Liam Girdwood, Rob Herring, Support Opensource, Wim Van Sebroeck,
Lee Jones, Alessandro Zummo, Alexandre Belloni, devicetree,
linux-watchdog, Guenter Roeck, linux-rtc, Adam Thomson,
linux-kernel, linux-input, Dmitry Torokhov, Mark Brown
On Thu, 16 Dec 2021 17:40:36 +0100, Alexandre Ghiti wrote:
> The device described is the "DA9063", not "DA9093", so fix this typo.
>
> Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
> ---
> Documentation/devicetree/bindings/mfd/da9063.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
2021-12-16 16:40 [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" Alexandre Ghiti
2021-12-16 16:40 ` [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML Alexandre Ghiti
2021-12-21 17:00 ` [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" Rob Herring
@ 2021-12-29 15:27 ` Lee Jones
2 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2021-12-29 15:27 UTC (permalink / raw)
To: Alexandre Ghiti
Cc: Dmitry Torokhov, Rob Herring, Adam Thomson, Support Opensource,
Liam Girdwood, Mark Brown, Alessandro Zummo, Alexandre Belloni,
Wim Van Sebroeck, Guenter Roeck, linux-input, devicetree,
linux-kernel, linux-rtc, linux-watchdog
On Thu, 16 Dec 2021, Alexandre Ghiti wrote:
> The device described is the "DA9063", not "DA9093", so fix this typo.
>
> Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
> ---
> Documentation/devicetree/bindings/mfd/da9063.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-12-29 15:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-16 16:40 [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" Alexandre Ghiti
2021-12-16 16:40 ` [PATCH v2 2/2] dt-bindings: Migrate DA9063 text bindings to YAML Alexandre Ghiti
2021-12-16 16:49 ` Mark Brown
2021-12-17 3:47 ` Rob Herring
2021-12-21 17:00 ` [PATCH v2 1/2] dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" Rob Herring
2021-12-29 15:27 ` Lee Jones
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.