* [PATCH v5 0/4] arm: dts: qcom: sc7280: Add display DT nodes for sc7280
@ 2021-12-24 16:03 ` Sankeerth Billakanti
0 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: Sankeerth Billakanti, robdclark, seanpaul, swboyd, quic_kalyant,
quic_abhinavk, dianders, quic_khsieh, quic_mkrishn
Add display devicetree support for sc7280 platform.
Krishna Manikandan (1):
arm64: dts: qcom: sc7280: add display dt nodes
Kuogee Hsieh (1):
arm64: dts: qcom: sc7280: Add Display Port node
Rajeev Nandan (1):
arm64: dts: qcom: sc7280: Add DSI display nodes
Sankeerth Billakanti (1):
arm64: dts: qcom: sc7280: add edp display dt nodes
arch/arm64/boot/dts/qcom/sc7280.dtsi | 390 ++++++++++++++++++++++++++++++++++-
1 file changed, 388 insertions(+), 2 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v5 0/4] arm: dts: qcom: sc7280: Add display DT nodes for sc7280
@ 2021-12-24 16:03 ` Sankeerth Billakanti
0 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: quic_kalyant, Sankeerth Billakanti, dianders, quic_abhinavk,
swboyd, seanpaul, quic_mkrishn, quic_khsieh
Add display devicetree support for sc7280 platform.
Krishna Manikandan (1):
arm64: dts: qcom: sc7280: add display dt nodes
Kuogee Hsieh (1):
arm64: dts: qcom: sc7280: Add Display Port node
Rajeev Nandan (1):
arm64: dts: qcom: sc7280: Add DSI display nodes
Sankeerth Billakanti (1):
arm64: dts: qcom: sc7280: add edp display dt nodes
arch/arm64/boot/dts/qcom/sc7280.dtsi | 390 ++++++++++++++++++++++++++++++++++-
1 file changed, 388 insertions(+), 2 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v5 1/4] arm64: dts: qcom: sc7280: add display dt nodes
2021-12-24 16:03 ` Sankeerth Billakanti
@ 2021-12-24 16:03 ` Sankeerth Billakanti
-1 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: Krishna Manikandan, robdclark, seanpaul, swboyd, quic_kalyant,
quic_abhinavk, dianders, quic_khsieh, quic_sbillaka
From: Krishna Manikandan <quic_mkrishn@quicinc.com>
Add mdss and mdp DT nodes for sc7280.
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 ++++++++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 937c2e0..d138f9d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2779,6 +2779,96 @@
#power-domain-cells = <1>;
};
+ mdss: display-subsystem@ae00000 {
+ compatible = "qcom,sc7280-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ assigned-clock-rates = <300000000>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x900 0x402>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,sc7280-dpu";
+ reg = <0 0x0ae01000 0 0x8f030>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>;
+ assigned-clock-rates = <300000000>,
+ <19200000>,
+ <19200000>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ status = "disabled";
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-380000000 {
+ opp-hz = /bits/ 64 <380000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-506666667 {
+ opp-hz = /bits/ 64 <506666667>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7280-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 1/4] arm64: dts: qcom: sc7280: add display dt nodes
@ 2021-12-24 16:03 ` Sankeerth Billakanti
0 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: quic_kalyant, quic_sbillaka, dianders, quic_abhinavk, swboyd,
seanpaul, Krishna Manikandan, quic_khsieh
From: Krishna Manikandan <quic_mkrishn@quicinc.com>
Add mdss and mdp DT nodes for sc7280.
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 ++++++++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 937c2e0..d138f9d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2779,6 +2779,96 @@
#power-domain-cells = <1>;
};
+ mdss: display-subsystem@ae00000 {
+ compatible = "qcom,sc7280-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ assigned-clock-rates = <300000000>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x900 0x402>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,sc7280-dpu";
+ reg = <0 0x0ae01000 0 0x8f030>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>;
+ assigned-clock-rates = <300000000>,
+ <19200000>,
+ <19200000>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ status = "disabled";
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-380000000 {
+ opp-hz = /bits/ 64 <380000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-506666667 {
+ opp-hz = /bits/ 64 <506666667>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7280-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add DSI display nodes
2021-12-24 16:03 ` Sankeerth Billakanti
@ 2021-12-24 16:03 ` Sankeerth Billakanti
-1 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: Rajeev Nandan, robdclark, seanpaul, swboyd, quic_kalyant,
quic_abhinavk, dianders, quic_khsieh, quic_mkrishn,
quic_sbillaka
From: Rajeev Nandan <quic_rajeevny@quicinc.com>
Add DSI controller and PHY nodes for sc7280.
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 111 ++++++++++++++++++++++++++++++++++-
1 file changed, 109 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index d138f9d..fe53e0b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2766,8 +2766,14 @@
reg = <0 0xaf00000 0 0x20000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
- <0>, <0>, <0>, <0>, <0>, <0>;
- clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
+ <&mdss_dsi_phy 0>,
+ <&mdss_dsi_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "gcc_disp_gpll0_clk",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
@@ -2843,6 +2849,18 @@
status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -2867,6 +2885,95 @@
};
};
};
+
+ mdss_dsi: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ phys = <&mdss_dsi_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi_phy: phy@ae94400 {
+ compatible = "qcom,sc7280-dsi-phy-7nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x280>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
};
pdc: interrupt-controller@b220000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add DSI display nodes
@ 2021-12-24 16:03 ` Sankeerth Billakanti
0 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: quic_kalyant, quic_sbillaka, dianders, Rajeev Nandan,
quic_abhinavk, swboyd, seanpaul, quic_mkrishn, quic_khsieh
From: Rajeev Nandan <quic_rajeevny@quicinc.com>
Add DSI controller and PHY nodes for sc7280.
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 111 ++++++++++++++++++++++++++++++++++-
1 file changed, 109 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index d138f9d..fe53e0b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2766,8 +2766,14 @@
reg = <0 0xaf00000 0 0x20000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
- <0>, <0>, <0>, <0>, <0>, <0>;
- clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
+ <&mdss_dsi_phy 0>,
+ <&mdss_dsi_phy 1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "gcc_disp_gpll0_clk",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
@@ -2843,6 +2849,18 @@
status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -2867,6 +2885,95 @@
};
};
};
+
+ mdss_dsi: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ phys = <&mdss_dsi_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi_phy: phy@ae94400 {
+ compatible = "qcom,sc7280-dsi-phy-7nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x280>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
};
pdc: interrupt-controller@b220000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 3/4] arm64: dts: qcom: sc7280: add edp display dt nodes
2021-12-24 16:03 ` Sankeerth Billakanti
@ 2021-12-24 16:03 ` Sankeerth Billakanti
-1 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: Sankeerth Billakanti, robdclark, seanpaul, swboyd, quic_kalyant,
quic_abhinavk, dianders, quic_khsieh, quic_mkrishn
Add edp controller and phy DT nodes for sc7280.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 107 ++++++++++++++++++++++++++++++++++-
1 file changed, 105 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index fe53e0b..ba4dc230 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2770,8 +2770,8 @@
<&mdss_dsi_phy 1>,
<0>,
<0>,
- <0>,
- <0>;
+ <&mdss_edp_phy 0>,
+ <&mdss_edp_phy 1>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk",
"dsi0_phy_pll_out_byteclk",
@@ -2859,6 +2859,13 @@
remote-endpoint = <&dsi0_in>;
};
};
+
+ port@1 {
+ reg = <1>;
+ dpu_intf5_out: endpoint {
+ remote-endpoint = <&edp_in>;
+ };
+ };
};
mdp_opp_table: opp-table {
@@ -2974,6 +2981,102 @@
status = "disabled";
};
+
+ mdss_edp: edp@aea0000 {
+ compatible = "qcom,sc7280-edp";
+
+ reg = <0 0xaea0000 0 0x200>,
+ <0 0xaea0200 0 0x200>,
+ <0 0xaea0400 0 0xc00>,
+ <0 0xaea1000 0 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <14>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_EDP_CLKREF_EN>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+ clock-names = "core_xo",
+ "core_ref",
+ "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ #clock-cells = <1>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+ phys = <&mdss_edp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&edp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ edp_in: endpoint {
+ remote-endpoint = <&dpu_intf5_out>;
+ };
+ };
+ };
+
+ edp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_edp_phy: phy@aec2a00 {
+ compatible = "qcom,sc7280-edp-phy";
+
+ reg = <0 0xaec2a00 0 0x19c>,
+ <0 0xaec2200 0 0xa0>,
+ <0 0xaec2600 0 0xa0>,
+ <0 0xaec2000 0 0x1c0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_EDP_CLKREF_EN>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
};
pdc: interrupt-controller@b220000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 3/4] arm64: dts: qcom: sc7280: add edp display dt nodes
@ 2021-12-24 16:03 ` Sankeerth Billakanti
0 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: quic_kalyant, Sankeerth Billakanti, dianders, quic_abhinavk,
swboyd, seanpaul, quic_mkrishn, quic_khsieh
Add edp controller and phy DT nodes for sc7280.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 107 ++++++++++++++++++++++++++++++++++-
1 file changed, 105 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index fe53e0b..ba4dc230 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2770,8 +2770,8 @@
<&mdss_dsi_phy 1>,
<0>,
<0>,
- <0>,
- <0>;
+ <&mdss_edp_phy 0>,
+ <&mdss_edp_phy 1>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk",
"dsi0_phy_pll_out_byteclk",
@@ -2859,6 +2859,13 @@
remote-endpoint = <&dsi0_in>;
};
};
+
+ port@1 {
+ reg = <1>;
+ dpu_intf5_out: endpoint {
+ remote-endpoint = <&edp_in>;
+ };
+ };
};
mdp_opp_table: opp-table {
@@ -2974,6 +2981,102 @@
status = "disabled";
};
+
+ mdss_edp: edp@aea0000 {
+ compatible = "qcom,sc7280-edp";
+
+ reg = <0 0xaea0000 0 0x200>,
+ <0 0xaea0200 0 0x200>,
+ <0 0xaea0400 0 0xc00>,
+ <0 0xaea1000 0 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <14>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_EDP_CLKREF_EN>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+ clock-names = "core_xo",
+ "core_ref",
+ "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ #clock-cells = <1>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+ phys = <&mdss_edp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&edp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ edp_in: endpoint {
+ remote-endpoint = <&dpu_intf5_out>;
+ };
+ };
+ };
+
+ edp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_edp_phy: phy@aec2a00 {
+ compatible = "qcom,sc7280-edp-phy";
+
+ reg = <0 0xaec2a00 0 0x19c>,
+ <0 0xaec2200 0 0xa0>,
+ <0 0xaec2600 0 0xa0>,
+ <0 0xaec2000 0 0x1c0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_EDP_CLKREF_EN>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
};
pdc: interrupt-controller@b220000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 4/4] arm64: dts: qcom: sc7280: Add Display Port node
2021-12-24 16:03 ` Sankeerth Billakanti
@ 2021-12-24 16:03 ` Sankeerth Billakanti
-1 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: Kuogee Hsieh, robdclark, seanpaul, swboyd, quic_kalyant,
quic_abhinavk, dianders, quic_mkrishn, quic_sbillaka
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 +++++++++++++++++++++++++++++++++++-
1 file changed, 88 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index ba4dc230..b3a0111 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2768,8 +2768,8 @@
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&mdss_dsi_phy 0>,
<&mdss_dsi_phy 1>,
- <0>,
- <0>,
+ <&dp_phy 0>,
+ <&dp_phy 1>,
<&mdss_edp_phy 0>,
<&mdss_edp_phy 1>;
clock-names = "bi_tcxo",
@@ -2866,6 +2866,13 @@
remote-endpoint = <&edp_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
};
mdp_opp_table: opp-table {
@@ -3077,6 +3084,79 @@
status = "disabled";
};
+
+ mdss_dp: displayport-controller@ae90000 {
+ compatible = "qcom,sc7280-dp";
+
+ reg = <0 0x0ae90000 0 0x1400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ #clock-cells = <1>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
};
pdc: interrupt-controller@b220000 {
@@ -3179,6 +3259,12 @@
bias-pull-up;
};
+ dp_hot_plug_det: dp-hot-plug-det {
+ pins = "gpio47";
+ function = "dp_hot";
+ bias-disable;
+ };
+
qspi_clk: qspi-clk {
pins = "gpio14";
function = "qspi_clk";
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 4/4] arm64: dts: qcom: sc7280: Add Display Port node
@ 2021-12-24 16:03 ` Sankeerth Billakanti
0 siblings, 0 replies; 12+ messages in thread
From: Sankeerth Billakanti @ 2021-12-24 16:03 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, linux-kernel, devicetree,
agross, bjorn.andersson, robh+dt
Cc: quic_kalyant, quic_sbillaka, dianders, quic_abhinavk, swboyd,
seanpaul, quic_mkrishn, Kuogee Hsieh
From: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 +++++++++++++++++++++++++++++++++++-
1 file changed, 88 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index ba4dc230..b3a0111 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2768,8 +2768,8 @@
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&mdss_dsi_phy 0>,
<&mdss_dsi_phy 1>,
- <0>,
- <0>,
+ <&dp_phy 0>,
+ <&dp_phy 1>,
<&mdss_edp_phy 0>,
<&mdss_edp_phy 1>;
clock-names = "bi_tcxo",
@@ -2866,6 +2866,13 @@
remote-endpoint = <&edp_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
};
mdp_opp_table: opp-table {
@@ -3077,6 +3084,79 @@
status = "disabled";
};
+
+ mdss_dp: displayport-controller@ae90000 {
+ compatible = "qcom,sc7280-dp";
+
+ reg = <0 0x0ae90000 0 0x1400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ #clock-cells = <1>;
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
};
pdc: interrupt-controller@b220000 {
@@ -3179,6 +3259,12 @@
bias-pull-up;
};
+ dp_hot_plug_det: dp-hot-plug-det {
+ pins = "gpio47";
+ function = "dp_hot";
+ bias-disable;
+ };
+
qspi_clk: qspi-clk {
pins = "gpio14";
function = "qspi_clk";
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/4] arm: dts: qcom: sc7280: Add display DT nodes for sc7280
2021-12-24 16:03 ` Sankeerth Billakanti
@ 2022-01-31 18:24 ` Bjorn Andersson
-1 siblings, 0 replies; 12+ messages in thread
From: Bjorn Andersson @ 2022-01-31 18:24 UTC (permalink / raw)
To: dri-devel, freedreno, devicetree, linux-arm-msm, agross,
Sankeerth Billakanti, robh+dt, linux-kernel
Cc: robdclark, quic_khsieh, quic_abhinavk, quic_kalyant,
quic_mkrishn, swboyd, seanpaul, dianders
On Fri, 24 Dec 2021 21:33:09 +0530, Sankeerth Billakanti wrote:
> Add display devicetree support for sc7280 platform.
>
> Krishna Manikandan (1):
> arm64: dts: qcom: sc7280: add display dt nodes
>
> Kuogee Hsieh (1):
> arm64: dts: qcom: sc7280: Add Display Port node
>
> [...]
Applied, thanks!
[1/4] arm64: dts: qcom: sc7280: add display dt nodes
commit: fcb68dfda5cbd816d27ac50c287833848874f61c
[2/4] arm64: dts: qcom: sc7280: Add DSI display nodes
commit: 43137272f0bc5e05e4c4c6f7bfce017bfb9e16b5
[3/4] arm64: dts: qcom: sc7280: add edp display dt nodes
commit: 25940788d170251373d8975d359706350818fa0f
[4/4] arm64: dts: qcom: sc7280: Add Display Port node
commit: fc6b1225d20de0298a7b0e52eb3843d71e1992e8
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/4] arm: dts: qcom: sc7280: Add display DT nodes for sc7280
@ 2022-01-31 18:24 ` Bjorn Andersson
0 siblings, 0 replies; 12+ messages in thread
From: Bjorn Andersson @ 2022-01-31 18:24 UTC (permalink / raw)
To: dri-devel, freedreno, devicetree, linux-arm-msm, agross,
Sankeerth Billakanti, robh+dt, linux-kernel
Cc: quic_kalyant, dianders, quic_abhinavk, swboyd, quic_mkrishn,
seanpaul, quic_khsieh
On Fri, 24 Dec 2021 21:33:09 +0530, Sankeerth Billakanti wrote:
> Add display devicetree support for sc7280 platform.
>
> Krishna Manikandan (1):
> arm64: dts: qcom: sc7280: add display dt nodes
>
> Kuogee Hsieh (1):
> arm64: dts: qcom: sc7280: Add Display Port node
>
> [...]
Applied, thanks!
[1/4] arm64: dts: qcom: sc7280: add display dt nodes
commit: fcb68dfda5cbd816d27ac50c287833848874f61c
[2/4] arm64: dts: qcom: sc7280: Add DSI display nodes
commit: 43137272f0bc5e05e4c4c6f7bfce017bfb9e16b5
[3/4] arm64: dts: qcom: sc7280: add edp display dt nodes
commit: 25940788d170251373d8975d359706350818fa0f
[4/4] arm64: dts: qcom: sc7280: Add Display Port node
commit: fc6b1225d20de0298a7b0e52eb3843d71e1992e8
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2022-01-31 18:24 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-24 16:03 [PATCH v5 0/4] arm: dts: qcom: sc7280: Add display DT nodes for sc7280 Sankeerth Billakanti
2021-12-24 16:03 ` Sankeerth Billakanti
2021-12-24 16:03 ` [PATCH v5 1/4] arm64: dts: qcom: sc7280: add display dt nodes Sankeerth Billakanti
2021-12-24 16:03 ` Sankeerth Billakanti
2021-12-24 16:03 ` [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add DSI display nodes Sankeerth Billakanti
2021-12-24 16:03 ` Sankeerth Billakanti
2021-12-24 16:03 ` [PATCH v5 3/4] arm64: dts: qcom: sc7280: add edp display dt nodes Sankeerth Billakanti
2021-12-24 16:03 ` Sankeerth Billakanti
2021-12-24 16:03 ` [PATCH v5 4/4] arm64: dts: qcom: sc7280: Add Display Port node Sankeerth Billakanti
2021-12-24 16:03 ` Sankeerth Billakanti
2022-01-31 18:24 ` [PATCH v5 0/4] arm: dts: qcom: sc7280: Add display DT nodes for sc7280 Bjorn Andersson
2022-01-31 18:24 ` Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.