[PATCH] media: ov2740: identify module after subdev initialisation

[PATCH] media: ov2740: identify module after subdev initialisation

[Bingbu Cao]

The module identifying will try to get the sub device data which
will be ready after sub device initialisation, so if try to use the
subdev data to deference the client will cause NULL pointer
dereference, this patch move the module identification after
v4l2_i2c_subdev_init() to fix this issue, it also fixes duplicate
module idendification.

Fixes: ada2c4f54d0a ("media: ov2740: support device probe in non-zero ACPI D state")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
---
 drivers/media/i2c/ov2740.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index bab720c7c1de..d5f0eabf20c6 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -1162,6 +1162,7 @@ static int ov2740_probe(struct i2c_client *client)
 	if (!ov2740)
 		return -ENOMEM;
 
+	v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops);
 	full_power = acpi_dev_state_d0(&client->dev);
 	if (full_power) {
 		ret = ov2740_identify_module(ov2740);
@@ -1171,13 +1172,6 @@ static int ov2740_probe(struct i2c_client *client)
 		}
 	}
 
-	v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops);
-	ret = ov2740_identify_module(ov2740);
-	if (ret) {
-		dev_err(&client->dev, "failed to find sensor: %d", ret);
-		return ret;
-	}
-
 	mutex_init(&ov2740->mutex);
 	ov2740->cur_mode = &supported_modes[0];
 	ret = ov2740_init_controls(ov2740);
-- 
2.7.4