* [PATCH v2 -next] powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
@ 2022-03-08 10:09 ` YueHaibing
0 siblings, 0 replies; 4+ messages in thread
From: YueHaibing @ 2022-03-08 10:09 UTC (permalink / raw)
To: jk, arnd, mpe, benh, paulus, yuehaibing, christophe.leroy
Cc: linuxppc-dev, linux-kernel
arch/powerpc/platforms/cell/spufs/sched.c:1055:12: warning: ‘show_spu_loadavg’ defined but not used [-Wunused-function]
static int show_spu_loadavg(struct seq_file *s, void *private)
^~~~~~~~~~~~~~~~
Move it into #ifdef block to fix this, also remove unneeded semicolon.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
v2: use #ifdef instead of __maybe_unused
---
arch/powerpc/platforms/cell/spufs/sched.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index d058f6233e66..99bd027a7f7c 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -1052,6 +1052,7 @@ void spuctx_switch_state(struct spu_context *ctx,
}
}
+#ifdef CONFIG_PROC_FS
static int show_spu_loadavg(struct seq_file *s, void *private)
{
int a, b, c;
@@ -1073,7 +1074,8 @@ static int show_spu_loadavg(struct seq_file *s, void *private)
atomic_read(&nr_spu_contexts),
idr_get_cursor(&task_active_pid_ns(current)->idr) - 1);
return 0;
-};
+}
+#endif
int __init spu_sched_init(void)
{
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 -next] powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
@ 2022-03-08 10:09 ` YueHaibing
0 siblings, 0 replies; 4+ messages in thread
From: YueHaibing @ 2022-03-08 10:09 UTC (permalink / raw)
To: jk, arnd, mpe, benh, paulus, yuehaibing, christophe.leroy
Cc: linuxppc-dev, linux-kernel
arch/powerpc/platforms/cell/spufs/sched.c:1055:12: warning: ‘show_spu_loadavg’ defined but not used [-Wunused-function]
static int show_spu_loadavg(struct seq_file *s, void *private)
^~~~~~~~~~~~~~~~
Move it into #ifdef block to fix this, also remove unneeded semicolon.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
v2: use #ifdef instead of __maybe_unused
---
arch/powerpc/platforms/cell/spufs/sched.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index d058f6233e66..99bd027a7f7c 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -1052,6 +1052,7 @@ void spuctx_switch_state(struct spu_context *ctx,
}
}
+#ifdef CONFIG_PROC_FS
static int show_spu_loadavg(struct seq_file *s, void *private)
{
int a, b, c;
@@ -1073,7 +1074,8 @@ static int show_spu_loadavg(struct seq_file *s, void *private)
atomic_read(&nr_spu_contexts),
idr_get_cursor(&task_active_pid_ns(current)->idr) - 1);
return 0;
-};
+}
+#endif
int __init spu_sched_init(void)
{
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 -next] powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
2022-03-08 10:09 ` YueHaibing
(?)
@ 2022-03-08 10:17 ` Christophe Leroy
-1 siblings, 0 replies; 4+ messages in thread
From: Christophe Leroy @ 2022-03-08 10:17 UTC (permalink / raw)
To: YueHaibing, jk, arnd, mpe, benh, paulus; +Cc: linuxppc-dev, linux-kernel
Le 08/03/2022 à 11:09, YueHaibing a écrit :
> arch/powerpc/platforms/cell/spufs/sched.c:1055:12: warning: ‘show_spu_loadavg’ defined but not used [-Wunused-function]
> static int show_spu_loadavg(struct seq_file *s, void *private)
> ^~~~~~~~~~~~~~~~
>
> Move it into #ifdef block to fix this, also remove unneeded semicolon.
>
> Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> v2: use #ifdef instead of __maybe_unused
> ---
> arch/powerpc/platforms/cell/spufs/sched.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
> index d058f6233e66..99bd027a7f7c 100644
> --- a/arch/powerpc/platforms/cell/spufs/sched.c
> +++ b/arch/powerpc/platforms/cell/spufs/sched.c
> @@ -1052,6 +1052,7 @@ void spuctx_switch_state(struct spu_context *ctx,
> }
> }
>
> +#ifdef CONFIG_PROC_FS
> static int show_spu_loadavg(struct seq_file *s, void *private)
> {
> int a, b, c;
> @@ -1073,7 +1074,8 @@ static int show_spu_loadavg(struct seq_file *s, void *private)
> atomic_read(&nr_spu_contexts),
> idr_get_cursor(&task_active_pid_ns(current)->idr) - 1);
> return 0;
> -};
> +}
> +#endif
>
> int __init spu_sched_init(void)
> {
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 -next] powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
2022-03-08 10:09 ` YueHaibing
(?)
(?)
@ 2022-03-12 10:29 ` Michael Ellerman
-1 siblings, 0 replies; 4+ messages in thread
From: Michael Ellerman @ 2022-03-12 10:29 UTC (permalink / raw)
To: paulus, benh, arnd, christophe.leroy, jk, YueHaibing, mpe
Cc: linuxppc-dev, linux-kernel
On Tue, 8 Mar 2022 18:09:28 +0800, YueHaibing wrote:
> arch/powerpc/platforms/cell/spufs/sched.c:1055:12: warning: ‘show_spu_loadavg’ defined but not used [-Wunused-function]
> static int show_spu_loadavg(struct seq_file *s, void *private)
> ^~~~~~~~~~~~~~~~
>
> Move it into #ifdef block to fix this, also remove unneeded semicolon.
>
>
> [...]
Applied to powerpc/next.
[1/1] powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
https://git.kernel.org/powerpc/c/5986f6b6575ac830ede9648cfb64353c58067a9f
cheers
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-03-12 10:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-08 10:09 [PATCH v2 -next] powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n YueHaibing
2022-03-08 10:09 ` YueHaibing
2022-03-08 10:17 ` Christophe Leroy
2022-03-12 10:29 ` Michael Ellerman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.