[PATCH v12 3/7] pinctrl: qcom: Update macro name to LPI specific

From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
	<lgirdwood@gmail.com>, <broonie@kernel.org>, <robh+dt@kernel.org>,
	<quic_plai@quicinc.com>, <bgoswami@codeaurora.org>,
	<perex@perex.cz>, <tiwai@suse.com>,
	<srinivas.kandagatla@linaro.org>, <rohitkr@codeaurora.org>,
	<linux-arm-msm@vger.kernel.org>, <alsa-devel@alsa-project.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<swboyd@chromium.org>, <judyhsiao@chromium.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	<linux-gpio@vger.kernel.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
	"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v12 3/7] pinctrl: qcom: Update macro name to LPI specific
Date: Wed, 16 Mar 2022 21:47:02 +0530	[thread overview]
Message-ID: <1647447426-23425-4-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1647447426-23425-1-git-send-email-quic_srivasam@quicinc.com>

Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 2f19ab4..3c15f80 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -40,7 +40,7 @@
 #define LPI_GPIO_KEEPER			0x2
 #define LPI_GPIO_PULL_UP		0x3
 #define LPI_GPIO_DS_TO_VAL(v)		(v / 2 - 1)
-#define NO_SLEW				-1
+#define LPI_NO_SLEW				-1
 
 #define LPI_FUNCTION(fname)			                \
 	[LPI_MUX_##fname] = {		                \
@@ -193,14 +193,14 @@ static const struct lpi_pingroup sm8250_groups[] = {
 	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
 	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
 	LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
-	LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
-	LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
-	LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
-	LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
+	LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
+	LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
+	LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
+	LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
 	LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
 	LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
-	LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
-	LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
+	LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
+	LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
 };
 
 static const struct lpi_function sm8250_functions[] = {
@@ -435,7 +435,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 			}
 
 			slew_offset = g->slew_offset;
-			if (slew_offset == NO_SLEW)
+			if (slew_offset == LPI_NO_SLEW)
 				break;
 
 			mutex_lock(&pctrl->slew_access_lock);
-- 
2.7.4

