* [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Update dts for JetHub H1:
- add bluetooth node for RTL8822CS uart port
Update dts for JetHub D1:
- add ZigBee serial alias (ttyAML2) for backward compatibility
- update voltage regulators and SDIO config to match board's reference design
- update max freq for WiFi SDIO
Vyacheslav Bocharov (4):
arm64: meson: add dts bluetooth node for JetHub H1
arm64: meson: dts: update serial alias in dts for JetHub D1
arm64: meson: update SDIO voltage in dts for JetHub D1
arm64: meson: update WiFi SDIO in dts for JetHub D1
.../amlogic/meson-axg-jethome-jethub-j100.dts | 16 ++++++++++++----
.../meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
2 files changed, 18 insertions(+), 4 deletions(-)
--
2.30.2
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Update dts for JetHub H1:
- add bluetooth node for RTL8822CS uart port
Update dts for JetHub D1:
- add ZigBee serial alias (ttyAML2) for backward compatibility
- update voltage regulators and SDIO config to match board's reference design
- update max freq for WiFi SDIO
Vyacheslav Bocharov (4):
arm64: meson: add dts bluetooth node for JetHub H1
arm64: meson: dts: update serial alias in dts for JetHub D1
arm64: meson: update SDIO voltage in dts for JetHub D1
arm64: meson: update WiFi SDIO in dts for JetHub D1
.../amlogic/meson-axg-jethome-jethub-j100.dts | 16 ++++++++++++----
.../meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
2 files changed, 18 insertions(+), 4 deletions(-)
--
2.30.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Update dts for JetHub H1:
- add bluetooth node for RTL8822CS uart port
Update dts for JetHub D1:
- add ZigBee serial alias (ttyAML2) for backward compatibility
- update voltage regulators and SDIO config to match board's reference design
- update max freq for WiFi SDIO
Vyacheslav Bocharov (4):
arm64: meson: add dts bluetooth node for JetHub H1
arm64: meson: dts: update serial alias in dts for JetHub D1
arm64: meson: update SDIO voltage in dts for JetHub D1
arm64: meson: update WiFi SDIO in dts for JetHub D1
.../amlogic/meson-axg-jethome-jethub-j100.dts | 16 ++++++++++++----
.../meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
2 files changed, 18 insertions(+), 4 deletions(-)
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v2 1/4] arm64: meson: add dts bluetooth node for JetHub H1
2022-03-26 7:51 ` Vyacheslav Bocharov
(?)
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
-1 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6eafb908695f..fcb304c5a40f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -213,6 +213,12 @@ &uart_A {
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+
+ bluetooth {
+ compatible = "realtek,rtl8822cs-bt";
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+ };
};
&uart_C {
--
2.30.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 1/4] arm64: meson: add dts bluetooth node for JetHub H1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6eafb908695f..fcb304c5a40f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -213,6 +213,12 @@ &uart_A {
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+
+ bluetooth {
+ compatible = "realtek,rtl8822cs-bt";
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+ };
};
&uart_C {
--
2.30.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 1/4] arm64: meson: add dts bluetooth node for JetHub H1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6eafb908695f..fcb304c5a40f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -213,6 +213,12 @@ &uart_A {
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+
+ bluetooth {
+ compatible = "realtek,rtl8822cs-bt";
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+ };
};
&uart_C {
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
2022-03-26 7:51 ` Vyacheslav Bocharov
(?)
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
-1 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Change zigbee serial port alias to ttyAML2 for backward compatibility.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 52ebe371df26..66c1eeba8f48 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -18,7 +18,7 @@ / {
model = "JetHome JetHub J100";
aliases {
serial0 = &uart_AO; /* Console */
- serial1 = &uart_AO_B; /* External UART (Wireless Module) */
+ serial2 = &uart_AO_B; /* External UART (Wireless Module) */
ethernet0 = ðmac;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Change zigbee serial port alias to ttyAML2 for backward compatibility.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 52ebe371df26..66c1eeba8f48 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -18,7 +18,7 @@ / {
model = "JetHome JetHub J100";
aliases {
serial0 = &uart_AO; /* Console */
- serial1 = &uart_AO_B; /* External UART (Wireless Module) */
+ serial2 = &uart_AO_B; /* External UART (Wireless Module) */
ethernet0 = ðmac;
};
--
2.30.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Change zigbee serial port alias to ttyAML2 for backward compatibility.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 52ebe371df26..66c1eeba8f48 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -18,7 +18,7 @@ / {
model = "JetHome JetHub J100";
aliases {
serial0 = &uart_AO; /* Console */
- serial1 = &uart_AO_B; /* External UART (Wireless Module) */
+ serial2 = &uart_AO_B; /* External UART (Wireless Module) */
ethernet0 = ðmac;
};
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
2022-03-26 7:51 ` Vyacheslav Bocharov
(?)
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
-1 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Fix the dts to match board's reference design:
- update vddio_boot regulator to 3.3v (Wi-Fi SDIO module)
- add vccq_1v8 regulator with 1.8v for eMMC SDIO
In the first revision of JetHub D1 the vccq_1v8 regulator was 3.3v.
All installed eMMC modules were tested to work in HS200 mode at 3.3v
supply voltage. In the next revisions of the board eMMC will be
powered with 1.8v according to the standard.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
.../dts/amlogic/meson-axg-jethome-jethub-j100.dts | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 66c1eeba8f48..e52abffdf8cf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -81,6 +81,15 @@ vddio_ao18: regulator-vddio_ao18 {
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vccq_1v8: regulator-vccq_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCQ_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
@@ -282,7 +291,7 @@ &sd_emmc_c {
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
+ vqmmc-supply = <&vccq_1v8>;
};
/* UART Bluetooth */
--
2.30.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Fix the dts to match board's reference design:
- update vddio_boot regulator to 3.3v (Wi-Fi SDIO module)
- add vccq_1v8 regulator with 1.8v for eMMC SDIO
In the first revision of JetHub D1 the vccq_1v8 regulator was 3.3v.
All installed eMMC modules were tested to work in HS200 mode at 3.3v
supply voltage. In the next revisions of the board eMMC will be
powered with 1.8v according to the standard.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
.../dts/amlogic/meson-axg-jethome-jethub-j100.dts | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 66c1eeba8f48..e52abffdf8cf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -81,6 +81,15 @@ vddio_ao18: regulator-vddio_ao18 {
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vccq_1v8: regulator-vccq_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCQ_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
@@ -282,7 +291,7 @@ &sd_emmc_c {
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
+ vqmmc-supply = <&vccq_1v8>;
};
/* UART Bluetooth */
--
2.30.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Fix the dts to match board's reference design:
- update vddio_boot regulator to 3.3v (Wi-Fi SDIO module)
- add vccq_1v8 regulator with 1.8v for eMMC SDIO
In the first revision of JetHub D1 the vccq_1v8 regulator was 3.3v.
All installed eMMC modules were tested to work in HS200 mode at 3.3v
supply voltage. In the next revisions of the board eMMC will be
powered with 1.8v according to the standard.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
.../dts/amlogic/meson-axg-jethome-jethub-j100.dts | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 66c1eeba8f48..e52abffdf8cf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -81,6 +81,15 @@ vddio_ao18: regulator-vddio_ao18 {
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vccq_1v8: regulator-vccq_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCQ_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
@@ -282,7 +291,7 @@ &sd_emmc_c {
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
+ vqmmc-supply = <&vccq_1v8>;
};
/* UART Bluetooth */
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
2022-03-26 7:51 ` Vyacheslav Bocharov
(?)
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
-1 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Fix the dts to match board's reference design:
- update the maximum SDIO frequency to match 3.3v regulator (Wi-Fi SDIO module)
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index e52abffdf8cf..9d6d6dcb562c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -257,8 +257,7 @@ &sd_emmc_b {
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr104;
- max-frequency = <200000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
--
2.30.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Fix the dts to match board's reference design:
- update the maximum SDIO frequency to match 3.3v regulator (Wi-Fi SDIO module)
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index e52abffdf8cf..9d6d6dcb562c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -257,8 +257,7 @@ &sd_emmc_b {
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr104;
- max-frequency = <200000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
--
2.30.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v2 4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
@ 2022-03-26 7:51 ` Vyacheslav Bocharov
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav Bocharov @ 2022-03-26 7:51 UTC (permalink / raw)
To: Neil Armstrong, Kevin Hilman, linux-amlogic, linux-arm-kernel,
linux-kernel, devicetree
Fix the dts to match board's reference design:
- update the maximum SDIO frequency to match 3.3v regulator (Wi-Fi SDIO module)
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index e52abffdf8cf..9d6d6dcb562c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -257,8 +257,7 @@ &sd_emmc_b {
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr104;
- max-frequency = <200000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
2022-03-26 7:51 ` Vyacheslav Bocharov
(?)
@ 2022-04-04 7:55 ` Neil Armstrong
-1 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2022-04-04 7:55 UTC (permalink / raw)
To: Vyacheslav Bocharov, Kevin Hilman, linux-amlogic,
linux-arm-kernel, linux-kernel, devicetree
On 26/03/2022 08:51, Vyacheslav Bocharov wrote:
> Update dts for JetHub H1:
> - add bluetooth node for RTL8822CS uart port
>
> Update dts for JetHub D1:
> - add ZigBee serial alias (ttyAML2) for backward compatibility
> - update voltage regulators and SDIO config to match board's reference design
> - update max freq for WiFi SDIO
>
> Vyacheslav Bocharov (4):
> arm64: meson: add dts bluetooth node for JetHub H1
> arm64: meson: dts: update serial alias in dts for JetHub D1
> arm64: meson: update SDIO voltage in dts for JetHub D1
> arm64: meson: update WiFi SDIO in dts for JetHub D1
>
> .../amlogic/meson-axg-jethome-jethub-j100.dts | 16 ++++++++++++----
> .../meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
> 2 files changed, 18 insertions(+), 4 deletions(-)
>
For whole set:
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-04-04 7:55 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2022-04-04 7:55 UTC (permalink / raw)
To: Vyacheslav Bocharov, Kevin Hilman, linux-amlogic,
linux-arm-kernel, linux-kernel, devicetree
On 26/03/2022 08:51, Vyacheslav Bocharov wrote:
> Update dts for JetHub H1:
> - add bluetooth node for RTL8822CS uart port
>
> Update dts for JetHub D1:
> - add ZigBee serial alias (ttyAML2) for backward compatibility
> - update voltage regulators and SDIO config to match board's reference design
> - update max freq for WiFi SDIO
>
> Vyacheslav Bocharov (4):
> arm64: meson: add dts bluetooth node for JetHub H1
> arm64: meson: dts: update serial alias in dts for JetHub D1
> arm64: meson: update SDIO voltage in dts for JetHub D1
> arm64: meson: update WiFi SDIO in dts for JetHub D1
>
> .../amlogic/meson-axg-jethome-jethub-j100.dts | 16 ++++++++++++----
> .../meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
> 2 files changed, 18 insertions(+), 4 deletions(-)
>
For whole set:
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-04-04 7:55 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2022-04-04 7:55 UTC (permalink / raw)
To: Vyacheslav Bocharov, Kevin Hilman, linux-amlogic,
linux-arm-kernel, linux-kernel, devicetree
On 26/03/2022 08:51, Vyacheslav Bocharov wrote:
> Update dts for JetHub H1:
> - add bluetooth node for RTL8822CS uart port
>
> Update dts for JetHub D1:
> - add ZigBee serial alias (ttyAML2) for backward compatibility
> - update voltage regulators and SDIO config to match board's reference design
> - update max freq for WiFi SDIO
>
> Vyacheslav Bocharov (4):
> arm64: meson: add dts bluetooth node for JetHub H1
> arm64: meson: dts: update serial alias in dts for JetHub D1
> arm64: meson: update SDIO voltage in dts for JetHub D1
> arm64: meson: update WiFi SDIO in dts for JetHub D1
>
> .../amlogic/meson-axg-jethome-jethub-j100.dts | 16 ++++++++++++----
> .../meson-gxl-s905w-jethome-jethub-j80.dts | 6 ++++++
> 2 files changed, 18 insertions(+), 4 deletions(-)
>
For whole set:
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
2022-03-26 7:51 ` Vyacheslav Bocharov
(?)
@ 2022-04-04 8:01 ` Neil Armstrong
-1 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2022-04-04 8:01 UTC (permalink / raw)
To: linux-kernel, linux-amlogic, Kevin Hilman, Vyacheslav Bocharov,
devicetree, linux-arm-kernel
Cc: Neil Armstrong
Hi,
On Sat, 26 Mar 2022 10:51:06 +0300, Vyacheslav Bocharov wrote:
> Update dts for JetHub H1:
> - add bluetooth node for RTL8822CS uart port
>
> Update dts for JetHub D1:
> - add ZigBee serial alias (ttyAML2) for backward compatibility
> - update voltage regulators and SDIO config to match board's reference design
> - update max freq for WiFi SDIO
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.19/dt64)
[1/4] arm64: meson: add dts bluetooth node for JetHub H1
https://git.kernel.org/amlogic/c/2bda08dfc501967a7a7bd6f77f04afef14dc7271
[2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
https://git.kernel.org/amlogic/c/cf94e26508ad411c2a618b00dfaae515affd0ca7
[3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
https://git.kernel.org/amlogic/c/81bbd2bd24a9ebac3871b293060df50445458c79
[4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
https://git.kernel.org/amlogic/c/87a87657249316616138c103c2bdb7525c34d987
--
Neil
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-04-04 8:01 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2022-04-04 8:01 UTC (permalink / raw)
To: linux-kernel, linux-amlogic, Kevin Hilman, Vyacheslav Bocharov,
devicetree, linux-arm-kernel
Cc: Neil Armstrong
Hi,
On Sat, 26 Mar 2022 10:51:06 +0300, Vyacheslav Bocharov wrote:
> Update dts for JetHub H1:
> - add bluetooth node for RTL8822CS uart port
>
> Update dts for JetHub D1:
> - add ZigBee serial alias (ttyAML2) for backward compatibility
> - update voltage regulators and SDIO config to match board's reference design
> - update max freq for WiFi SDIO
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.19/dt64)
[1/4] arm64: meson: add dts bluetooth node for JetHub H1
https://git.kernel.org/amlogic/c/2bda08dfc501967a7a7bd6f77f04afef14dc7271
[2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
https://git.kernel.org/amlogic/c/cf94e26508ad411c2a618b00dfaae515affd0ca7
[3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
https://git.kernel.org/amlogic/c/81bbd2bd24a9ebac3871b293060df50445458c79
[4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
https://git.kernel.org/amlogic/c/87a87657249316616138c103c2bdb7525c34d987
--
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-04-04 8:01 ` Neil Armstrong
0 siblings, 0 replies; 24+ messages in thread
From: Neil Armstrong @ 2022-04-04 8:01 UTC (permalink / raw)
To: linux-kernel, linux-amlogic, Kevin Hilman, Vyacheslav Bocharov,
devicetree, linux-arm-kernel
Cc: Neil Armstrong
Hi,
On Sat, 26 Mar 2022 10:51:06 +0300, Vyacheslav Bocharov wrote:
> Update dts for JetHub H1:
> - add bluetooth node for RTL8822CS uart port
>
> Update dts for JetHub D1:
> - add ZigBee serial alias (ttyAML2) for backward compatibility
> - update voltage regulators and SDIO config to match board's reference design
> - update max freq for WiFi SDIO
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.19/dt64)
[1/4] arm64: meson: add dts bluetooth node for JetHub H1
https://git.kernel.org/amlogic/c/2bda08dfc501967a7a7bd6f77f04afef14dc7271
[2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
https://git.kernel.org/amlogic/c/cf94e26508ad411c2a618b00dfaae515affd0ca7
[3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
https://git.kernel.org/amlogic/c/81bbd2bd24a9ebac3871b293060df50445458c79
[4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
https://git.kernel.org/amlogic/c/87a87657249316616138c103c2bdb7525c34d987
--
Neil
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
2022-04-04 8:01 ` Neil Armstrong
(?)
@ 2022-04-04 10:39 ` Vyacheslav
-1 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav @ 2022-04-04 10:39 UTC (permalink / raw)
To: Neil Armstrong, linux-kernel, linux-amlogic, Kevin Hilman,
devicetree, linux-arm-kernel
04.04.2022 11:01, Neil Armstrong wrote:
> Hi,
>
> On Sat, 26 Mar 2022 10:51:06 +0300, Vyacheslav Bocharov wrote:
>> Update dts for JetHub H1:
>> - add bluetooth node for RTL8822CS uart port
>>
>> Update dts for JetHub D1:
>> - add ZigBee serial alias (ttyAML2) for backward compatibility
>> - update voltage regulators and SDIO config to match board's reference design
>> - update max freq for WiFi SDIO
>>
>> [...]
>
> Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.19/dt64)
Thanks.
>
> [1/4] arm64: meson: add dts bluetooth node for JetHub H1
> https://git.kernel.org/amlogic/c/2bda08dfc501967a7a7bd6f77f04afef14dc7271
> [2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
> https://git.kernel.org/amlogic/c/cf94e26508ad411c2a618b00dfaae515affd0ca7
> [3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
> https://git.kernel.org/amlogic/c/81bbd2bd24a9ebac3871b293060df50445458c79
> [4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
> https://git.kernel.org/amlogic/c/87a87657249316616138c103c2bdb7525c34d987
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-04-04 10:39 ` Vyacheslav
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav @ 2022-04-04 10:39 UTC (permalink / raw)
To: Neil Armstrong, linux-kernel, linux-amlogic, Kevin Hilman,
devicetree, linux-arm-kernel
04.04.2022 11:01, Neil Armstrong wrote:
> Hi,
>
> On Sat, 26 Mar 2022 10:51:06 +0300, Vyacheslav Bocharov wrote:
>> Update dts for JetHub H1:
>> - add bluetooth node for RTL8822CS uart port
>>
>> Update dts for JetHub D1:
>> - add ZigBee serial alias (ttyAML2) for backward compatibility
>> - update voltage regulators and SDIO config to match board's reference design
>> - update max freq for WiFi SDIO
>>
>> [...]
>
> Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.19/dt64)
Thanks.
>
> [1/4] arm64: meson: add dts bluetooth node for JetHub H1
> https://git.kernel.org/amlogic/c/2bda08dfc501967a7a7bd6f77f04afef14dc7271
> [2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
> https://git.kernel.org/amlogic/c/cf94e26508ad411c2a618b00dfaae515affd0ca7
> [3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
> https://git.kernel.org/amlogic/c/81bbd2bd24a9ebac3871b293060df50445458c79
> [4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
> https://git.kernel.org/amlogic/c/87a87657249316616138c103c2bdb7525c34d987
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v2 0/4] arm64: meson: update dts for JetHub devices
@ 2022-04-04 10:39 ` Vyacheslav
0 siblings, 0 replies; 24+ messages in thread
From: Vyacheslav @ 2022-04-04 10:39 UTC (permalink / raw)
To: Neil Armstrong, linux-kernel, linux-amlogic, Kevin Hilman,
devicetree, linux-arm-kernel
04.04.2022 11:01, Neil Armstrong wrote:
> Hi,
>
> On Sat, 26 Mar 2022 10:51:06 +0300, Vyacheslav Bocharov wrote:
>> Update dts for JetHub H1:
>> - add bluetooth node for RTL8822CS uart port
>>
>> Update dts for JetHub D1:
>> - add ZigBee serial alias (ttyAML2) for backward compatibility
>> - update voltage regulators and SDIO config to match board's reference design
>> - update max freq for WiFi SDIO
>>
>> [...]
>
> Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.19/dt64)
Thanks.
>
> [1/4] arm64: meson: add dts bluetooth node for JetHub H1
> https://git.kernel.org/amlogic/c/2bda08dfc501967a7a7bd6f77f04afef14dc7271
> [2/4] arm64: meson: dts: update serial alias in dts for JetHub D1
> https://git.kernel.org/amlogic/c/cf94e26508ad411c2a618b00dfaae515affd0ca7
> [3/4] arm64: meson: update SDIO voltage in dts for JetHub D1
> https://git.kernel.org/amlogic/c/81bbd2bd24a9ebac3871b293060df50445458c79
> [4/4] arm64: meson: update WiFi SDIO in dts for JetHub D1
> https://git.kernel.org/amlogic/c/87a87657249316616138c103c2bdb7525c34d987
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2022-04-04 10:41 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-26 7:51 [PATCH v2 0/4] arm64: meson: update dts for JetHub devices Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` [PATCH v2 1/4] arm64: meson: add dts bluetooth node for JetHub H1 Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` [PATCH v2 2/4] arm64: meson: dts: update serial alias in dts for JetHub D1 Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` [PATCH v2 3/4] arm64: meson: update SDIO voltage " Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` [PATCH v2 4/4] arm64: meson: update WiFi SDIO " Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-03-26 7:51 ` Vyacheslav Bocharov
2022-04-04 7:55 ` [PATCH v2 0/4] arm64: meson: update dts for JetHub devices Neil Armstrong
2022-04-04 7:55 ` Neil Armstrong
2022-04-04 7:55 ` Neil Armstrong
2022-04-04 8:01 ` Neil Armstrong
2022-04-04 8:01 ` Neil Armstrong
2022-04-04 8:01 ` Neil Armstrong
2022-04-04 10:39 ` Vyacheslav
2022-04-04 10:39 ` Vyacheslav
2022-04-04 10:39 ` Vyacheslav
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.