All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
	<robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
	<dianders@chromium.org>, <swboyd@chromium.org>,
	<judyhsiao@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
	"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v9 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
Date: Thu, 21 Apr 2022 20:17:39 +0530	[thread overview]
Message-ID: <1650552459-21077-13-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1650552459-21077-1-git-send-email-quic_srivasam@quicinc.com>

Add dt nodes for sound card support on rev5 (aka CRD 3.0/3.1) boards,
which is using WCD938x headset playback, capture, I2S speaker playback
and DMICs via VA macro.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 98 +++++++++++++++++++++++
 1 file changed, 98 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index 4033d2a..bc6dbcc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -42,6 +42,104 @@
 		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 		#sound-dai-cells = <1>;
 	};
+
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-wcd938x-max98360a-1mic";
+
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"VA DMIC3", "MIC BIAS3",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		qcom,msm-mbhc-hphl-swh = <1>;
+		qcom,msm-mbhc-gnd-swh = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360A";
+			reg = <MI2S_SECONDARY>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <LPASS_DP_RX>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "WCD9385 Playback";
+			reg = <LPASS_CDC_DMA_RX0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+		};
+
+		dai-link@3 {
+			link-name = "WCD9385 Capture";
+			reg = <LPASS_CDC_DMA_TX3>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <LPASS_CDC_DMA_VA_TX0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
 };
 
 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
-- 
2.7.4


  parent reply	other threads:[~2022-04-21 14:49 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-21 14:47 [PATCH v9 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0 and CRD 2.0 Srinivasa Rao Mandadapu
2022-04-21 16:17   ` Matthias Kaehlcke
2022-04-22 13:42     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 16:28   ` Matthias Kaehlcke
2022-04-22 13:44     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0 and CRD 2.0 Srinivasa Rao Mandadapu
2022-04-21 16:44   ` Matthias Kaehlcke
2022-04-21 14:47 ` [PATCH v9 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 16:57   ` Matthias Kaehlcke
2022-04-22 13:46     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0 and 2.0 Srinivasa Rao Mandadapu
2022-04-21 17:00   ` Matthias Kaehlcke
2022-04-21 14:47 ` [PATCH v9 07/12] arm64: dts: qcom: sc7280: Add max98360a codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 17:11   ` Matthias Kaehlcke
2022-04-22 13:48     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0 and CRD 2.0 Srinivasa Rao Mandadapu
2022-04-21 17:13   ` Matthias Kaehlcke
2022-04-22 13:49     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 17:18   ` Matthias Kaehlcke
2022-04-21 14:47 ` [PATCH v9 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0 and CRD 2.0 Srinivasa Rao Mandadapu
2022-04-21 17:56   ` Matthias Kaehlcke
2022-04-22 13:51     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` Srinivasa Rao Mandadapu [this message]
2022-04-21 18:03   ` [PATCH v9 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Matthias Kaehlcke
2022-04-22 13:52     ` Srinivasa Rao Mandadapu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1650552459-21077-13-git-send-email-quic_srivasam@quicinc.com \
    --to=quic_srivasam@quicinc.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=judyhsiao@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_potturu@quicinc.com \
    --cc=quic_rohkumar@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.