All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
	<robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
	<dianders@chromium.org>, <swboyd@chromium.org>,
	<judyhsiao@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
	"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v9 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0 and CRD 2.0
Date: Thu, 21 Apr 2022 20:17:31 +0530	[thread overview]
Message-ID: <1650552459-21077-5-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1650552459-21077-1-git-send-email-quic_srivasam@quicinc.com>

Add wcd9385 codec node for audio use case on sc7280 based platforms
of revision 3 and 4 (aka CRD 1.0 and 2.0).
Add tlmm gpio property for switching CTIA/OMTP Headset.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts |  8 +++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi   | 50 ++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 344338a..462d655 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -87,6 +87,14 @@ ap_ts_pen_1v8: &i2c13 {
 	pins = "gpio51";
 };
 
+&wcd938x {
+	pinctrl-names = "default", "sleep", "us_euro_hs_sel";
+	pinctrl-0 = <&wcd_reset_n>;
+	pinctrl-1 = <&wcd_reset_n_sleep>;
+	pinctrl-2 = <&us_euro_hs_sel>;
+	us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
 &tlmm {
 	tp_int_odl: tp-int-odl {
 		pins = "gpio7";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 6cb5fc4..b711ad0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -20,6 +20,34 @@
 		serial1 = &uart7;
 	};
 
+	wcd938x: audio-codec-1 {
+		compatible = "qcom,wcd9385-codec";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&wcd_reset_n>;
+		pinctrl-1 = <&wcd_reset_n_sleep>;
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-io-supply = <&vreg_l18b_1p8>;
+		vdd-buck-supply = <&vreg_l17b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+							  500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		#sound-dai-cells = <1>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -678,6 +706,28 @@
 		function = "gpio";
 		bias-pull-down;
 	};
+
+	us_euro_hs_sel: us-euro-hs-sel {
+		pins = "gpio81";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	wcd_reset_n: wcd-reset-n {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		output-high;
+	};
+
+	wcd_reset_n_sleep: wcd-reset-n-sleep {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &remoteproc_wpss {
-- 
2.7.4


  parent reply	other threads:[~2022-04-21 14:49 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-21 14:47 [PATCH v9 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0 and CRD 2.0 Srinivasa Rao Mandadapu
2022-04-21 16:17   ` Matthias Kaehlcke
2022-04-22 13:42     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 16:28   ` Matthias Kaehlcke
2022-04-22 13:44     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` Srinivasa Rao Mandadapu [this message]
2022-04-21 16:44   ` [PATCH v9 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0 and CRD 2.0 Matthias Kaehlcke
2022-04-21 14:47 ` [PATCH v9 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 16:57   ` Matthias Kaehlcke
2022-04-22 13:46     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0 and 2.0 Srinivasa Rao Mandadapu
2022-04-21 17:00   ` Matthias Kaehlcke
2022-04-21 14:47 ` [PATCH v9 07/12] arm64: dts: qcom: sc7280: Add max98360a codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 17:11   ` Matthias Kaehlcke
2022-04-22 13:48     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0 and CRD 2.0 Srinivasa Rao Mandadapu
2022-04-21 17:13   ` Matthias Kaehlcke
2022-04-22 13:49     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 17:18   ` Matthias Kaehlcke
2022-04-21 14:47 ` [PATCH v9 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0 and CRD 2.0 Srinivasa Rao Mandadapu
2022-04-21 17:56   ` Matthias Kaehlcke
2022-04-22 13:51     ` Srinivasa Rao Mandadapu
2022-04-21 14:47 ` [PATCH v9 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-04-21 18:03   ` Matthias Kaehlcke
2022-04-22 13:52     ` Srinivasa Rao Mandadapu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1650552459-21077-5-git-send-email-quic_srivasam@quicinc.com \
    --to=quic_srivasam@quicinc.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=judyhsiao@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_potturu@quicinc.com \
    --cc=quic_rohkumar@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.