All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: marex@denx.de, linux-spi@vger.kernel.org, mkl@pengutronix.de,
	festevam@gmail.com
Cc: kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	baruch@tkos.co.il, linux-imx@nxp.com
Subject: Re: [PATCH v1 0/9] spi: spi-imx: cleanups and performance improvements
Date: Mon, 09 May 2022 22:13:33 +0100	[thread overview]
Message-ID: <165213081325.1980477.1425594067155934605.b4-ty@kernel.org> (raw)
In-Reply-To: <20220502175457.1977983-1-mkl@pengutronix.de>

On Mon, 2 May 2022 19:54:48 +0200, Marc Kleine-Budde wrote:
> this patch series first cleans up several sparse and checkpatch
> warnings, then finished master -< controller conversion. Then PIO
> based polling support is added. It's activated by default for
> transfers smaller than 30 µs (like in the raspi SPI drivers). The last
> patch optimized setup of the MX51_ECSPI_CONFIG register.
> 
> Changes since RFC:
> - rebased to broonie/spi.git for-5.19 (thanks Baruch)
> - 4/9: use swab32s instead of swab32
> - 5/9: use swahw32s instead of swahw32
> - 7/9: removed "select SPI_BITBANG" from Kconfig
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/9] spi: spi-imx: fix sparse warning: add identifier name to function definition
      commit: f7b8787164551a09fca287b1dea15d0c4d646e4a
[2/9] spi: spi-imx: avoid unnecessary line continuations
      commit: a8c785c1e75538876b524247a3738db53b1f78b8
[3/9] spi: spi-imx: mx51_ecspi_intctrl(): prefer 'unsigned int' to bare use of 'unsigned'
      commit: 1a23461a8a08c4a32972dec31a394eee3302511d
[4/9] spi: spi-imx: spi_imx_buf_rx_swap_u32(): fix sparse warning: use swab32s() instead of cpu_to_be32()
      commit: dae336d0dca669143e0fdf6b82c333bf6a8d9e0a
[5/9] spi: spi-imx: spi_imx_buf_rx_swap_u32(): replace open coded swahw32s()
      commit: baaadffe8854ea14eed1a5f3c09f2136c3aa4427
[6/9] spi: spi-imx: complete conversion from master -> controller
      commit: 63cd96b70f9366f67048fbc07294ce5823001ded
[7/9] spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller
      commit: 307c897db762d1e0feee9477276b08f6deca4a5b
[8/9] spi: spi-imx: add PIO polling support
      commit: 07e7593877882fbd07c55b26b7dcf88760449323
[9/9] spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged
      commit: 184434fcd6177b76f929570348935d7c9f22d296

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

WARNING: multiple messages have this Message-ID
From: Mark Brown <broonie@kernel.org>
To: marex@denx.de, linux-spi@vger.kernel.org, mkl@pengutronix.de,
	festevam@gmail.com
Cc: kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	baruch@tkos.co.il, linux-imx@nxp.com
Subject: Re: [PATCH v1 0/9] spi: spi-imx: cleanups and performance improvements
Date: Mon, 09 May 2022 22:13:33 +0100	[thread overview]
Message-ID: <165213081325.1980477.1425594067155934605.b4-ty@kernel.org> (raw)
In-Reply-To: <20220502175457.1977983-1-mkl@pengutronix.de>

On Mon, 2 May 2022 19:54:48 +0200, Marc Kleine-Budde wrote:
> this patch series first cleans up several sparse and checkpatch
> warnings, then finished master -< controller conversion. Then PIO
> based polling support is added. It's activated by default for
> transfers smaller than 30 µs (like in the raspi SPI drivers). The last
> patch optimized setup of the MX51_ECSPI_CONFIG register.
> 
> Changes since RFC:
> - rebased to broonie/spi.git for-5.19 (thanks Baruch)
> - 4/9: use swab32s instead of swab32
> - 5/9: use swahw32s instead of swahw32
> - 7/9: removed "select SPI_BITBANG" from Kconfig
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/9] spi: spi-imx: fix sparse warning: add identifier name to function definition
      commit: f7b8787164551a09fca287b1dea15d0c4d646e4a
[2/9] spi: spi-imx: avoid unnecessary line continuations
      commit: a8c785c1e75538876b524247a3738db53b1f78b8
[3/9] spi: spi-imx: mx51_ecspi_intctrl(): prefer 'unsigned int' to bare use of 'unsigned'
      commit: 1a23461a8a08c4a32972dec31a394eee3302511d
[4/9] spi: spi-imx: spi_imx_buf_rx_swap_u32(): fix sparse warning: use swab32s() instead of cpu_to_be32()
      commit: dae336d0dca669143e0fdf6b82c333bf6a8d9e0a
[5/9] spi: spi-imx: spi_imx_buf_rx_swap_u32(): replace open coded swahw32s()
      commit: baaadffe8854ea14eed1a5f3c09f2136c3aa4427
[6/9] spi: spi-imx: complete conversion from master -> controller
      commit: 63cd96b70f9366f67048fbc07294ce5823001ded
[7/9] spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller
      commit: 307c897db762d1e0feee9477276b08f6deca4a5b
[8/9] spi: spi-imx: add PIO polling support
      commit: 07e7593877882fbd07c55b26b7dcf88760449323
[9/9] spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged
      commit: 184434fcd6177b76f929570348935d7c9f22d296

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-05-09 21:13 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-02 17:54 [PATCH v1 0/9] spi: spi-imx: cleanups and performance improvements Marc Kleine-Budde
2022-05-02 17:54 ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 1/9] spi: spi-imx: fix sparse warning: add identifier name to function definition Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 2/9] spi: spi-imx: avoid unnecessary line continuations Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 3/9] spi: spi-imx: mx51_ecspi_intctrl(): prefer 'unsigned int' to bare use of 'unsigned' Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 4/9] spi: spi-imx: spi_imx_buf_rx_swap_u32(): fix sparse warning: use swab32s() instead of cpu_to_be32() Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 5/9] spi: spi-imx: spi_imx_buf_rx_swap_u32(): replace open coded swahw32s() Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 6/9] spi: spi-imx: complete conversion from master -> controller Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 7/9] spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 8/9] spi: spi-imx: add PIO polling support Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-02 17:54 ` [PATCH v1 9/9] spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged Marc Kleine-Budde
2022-05-02 17:54   ` Marc Kleine-Budde
2022-05-09 21:13 ` Mark Brown [this message]
2022-05-09 21:13   ` [PATCH v1 0/9] spi: spi-imx: cleanups and performance improvements Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=165213081325.1980477.1425594067155934605.b4-ty@kernel.org \
    --to=broonie@kernel.org \
    --cc=baruch@tkos.co.il \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-spi@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=mkl@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.