* [PATCH v8 0/3] eDP/DP Phy vdda realted function
@ 2022-05-20 16:26 ` Kuogee Hsieh
0 siblings, 0 replies; 10+ messages in thread
From: Kuogee Hsieh @ 2022-05-20 16:26 UTC (permalink / raw)
To: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, bjorn.andersson
Cc: quic_sbillaka, linux-arm-msm, quic_abhinavk, Kuogee Hsieh,
quic_aravindh, freedreno, linux-kernel
1) add regulator_set_load() to eDP phy
2) add regulator_set_load() to DP phy
3) remove vdda related function out of eDP/DP controller
Kuogee Hsieh (3):
phy: qcom-edp: add regulator_set_load to edp phy
phy: qcom-qmp: add regulator_set_load to dp phy
drm/msm/dp: delete vdda regulator related functions from eDP/DP
controller
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------
drivers/gpu/drm/msm/dp/dp_parser.h | 6 ---
drivers/gpu/drm/msm/dp/dp_power.c | 95 +------------------------------------
drivers/phy/qualcomm/phy-qcom-edp.c | 7 +++
drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++
5 files changed, 25 insertions(+), 113 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v8 1/3] phy: qcom-edp: add regulator_set_load to edp phy
2022-05-20 16:26 ` Kuogee Hsieh
@ 2022-05-20 16:26 ` Kuogee Hsieh
-1 siblings, 0 replies; 10+ messages in thread
From: Kuogee Hsieh @ 2022-05-20 16:26 UTC (permalink / raw)
To: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, bjorn.andersson
Cc: quic_sbillaka, linux-arm-msm, quic_abhinavk, Kuogee Hsieh,
quic_aravindh, freedreno, linux-kernel
This patch add regulator_set_load() before enable regulator at
eDP phy driver.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
drivers/phy/qualcomm/phy-qcom-edp.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index cacd32f..afd9e17 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -87,12 +87,17 @@ struct qcom_edp {
struct clk_bulk_data clks[2];
struct regulator_bulk_data supplies[2];
+ int enable_load[2];
};
static int qcom_edp_phy_init(struct phy *phy)
{
struct qcom_edp *edp = phy_get_drvdata(phy);
int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(edp->supplies); i++)
+ regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
if (ret)
@@ -635,6 +640,8 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
edp->supplies[0].supply = "vdda-phy";
edp->supplies[1].supply = "vdda-pll";
+ edp->enable_load[0] = 21800; /* load for 1.2 V vdda-phy supply */
+ edp->enable_load[1] = 36000; /* load for 0.9 V vdda-pll supply */
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
if (ret)
return ret;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 1/3] phy: qcom-edp: add regulator_set_load to edp phy
@ 2022-05-20 16:26 ` Kuogee Hsieh
0 siblings, 0 replies; 10+ messages in thread
From: Kuogee Hsieh @ 2022-05-20 16:26 UTC (permalink / raw)
To: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, bjorn.andersson
Cc: Kuogee Hsieh, quic_abhinavk, quic_aravindh, quic_sbillaka,
freedreno, linux-arm-msm, linux-kernel
This patch add regulator_set_load() before enable regulator at
eDP phy driver.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
drivers/phy/qualcomm/phy-qcom-edp.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index cacd32f..afd9e17 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -87,12 +87,17 @@ struct qcom_edp {
struct clk_bulk_data clks[2];
struct regulator_bulk_data supplies[2];
+ int enable_load[2];
};
static int qcom_edp_phy_init(struct phy *phy)
{
struct qcom_edp *edp = phy_get_drvdata(phy);
int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(edp->supplies); i++)
+ regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
if (ret)
@@ -635,6 +640,8 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
edp->supplies[0].supply = "vdda-phy";
edp->supplies[1].supply = "vdda-pll";
+ edp->enable_load[0] = 21800; /* load for 1.2 V vdda-phy supply */
+ edp->enable_load[1] = 36000; /* load for 0.9 V vdda-pll supply */
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
if (ret)
return ret;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v8 1/3] phy: qcom-edp: add regulator_set_load to edp phy
2022-05-20 16:26 ` Kuogee Hsieh
@ 2022-05-20 16:53 ` Bjorn Andersson
-1 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2022-05-20 16:53 UTC (permalink / raw)
To: Kuogee Hsieh
Cc: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, quic_abhinavk, quic_aravindh,
quic_sbillaka, freedreno, linux-arm-msm, linux-kernel
On Fri 20 May 09:26 PDT 2022, Kuogee Hsieh wrote:
> This patch add regulator_set_load() before enable regulator at
> eDP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
> drivers/phy/qualcomm/phy-qcom-edp.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index cacd32f..afd9e17 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -87,12 +87,17 @@ struct qcom_edp {
>
> struct clk_bulk_data clks[2];
> struct regulator_bulk_data supplies[2];
> + int enable_load[2];
> };
>
> static int qcom_edp_phy_init(struct phy *phy)
> {
> struct qcom_edp *edp = phy_get_drvdata(phy);
> int ret;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(edp->supplies); i++)
> + regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
The regulator framework only accounts for the load of enabled regulator
consumers, so you should be able to just call regulator_set_load() right
after devm_regulator_bulk_get() and not carry the enable_load array of
static constants.
Regards,
Bjorn
>
> ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
> if (ret)
> @@ -635,6 +640,8 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
>
> edp->supplies[0].supply = "vdda-phy";
> edp->supplies[1].supply = "vdda-pll";
> + edp->enable_load[0] = 21800; /* load for 1.2 V vdda-phy supply */
> + edp->enable_load[1] = 36000; /* load for 0.9 V vdda-pll supply */
> ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
> if (ret)
> return ret;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v8 1/3] phy: qcom-edp: add regulator_set_load to edp phy
@ 2022-05-20 16:53 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2022-05-20 16:53 UTC (permalink / raw)
To: Kuogee Hsieh
Cc: quic_sbillaka, quic_abhinavk, airlied, freedreno, dri-devel,
dianders, vkoul, agross, linux-arm-msm, dmitry.baryshkov,
quic_aravindh, swboyd, sean, linux-kernel
On Fri 20 May 09:26 PDT 2022, Kuogee Hsieh wrote:
> This patch add regulator_set_load() before enable regulator at
> eDP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
> drivers/phy/qualcomm/phy-qcom-edp.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index cacd32f..afd9e17 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -87,12 +87,17 @@ struct qcom_edp {
>
> struct clk_bulk_data clks[2];
> struct regulator_bulk_data supplies[2];
> + int enable_load[2];
> };
>
> static int qcom_edp_phy_init(struct phy *phy)
> {
> struct qcom_edp *edp = phy_get_drvdata(phy);
> int ret;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(edp->supplies); i++)
> + regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
The regulator framework only accounts for the load of enabled regulator
consumers, so you should be able to just call regulator_set_load() right
after devm_regulator_bulk_get() and not carry the enable_load array of
static constants.
Regards,
Bjorn
>
> ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
> if (ret)
> @@ -635,6 +640,8 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
>
> edp->supplies[0].supply = "vdda-phy";
> edp->supplies[1].supply = "vdda-pll";
> + edp->enable_load[0] = 21800; /* load for 1.2 V vdda-phy supply */
> + edp->enable_load[1] = 36000; /* load for 0.9 V vdda-pll supply */
> ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
> if (ret)
> return ret;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v8 2/3] phy: qcom-qmp: add regulator_set_load to dp phy
2022-05-20 16:26 ` Kuogee Hsieh
@ 2022-05-20 16:27 ` Kuogee Hsieh
-1 siblings, 0 replies; 10+ messages in thread
From: Kuogee Hsieh @ 2022-05-20 16:27 UTC (permalink / raw)
To: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, bjorn.andersson
Cc: quic_sbillaka, linux-arm-msm, quic_abhinavk, Kuogee Hsieh,
quic_aravindh, freedreno, linux-kernel
This patch add regulator_set_load() before enable regulator at
DP phy driver.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b144ae1..fcf87ae 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3130,6 +3130,7 @@ struct qmp_phy_cfg {
int num_resets;
/* regulators to be requested */
const char * const *vreg_list;
+ const unsigned int *vreg_enable_load;
int num_vregs;
/* array of registers with different offsets */
@@ -3346,6 +3347,10 @@ static const char * const qmp_phy_vreg_l[] = {
"vdda-phy", "vdda-pll",
};
+static const unsigned int qmp_phy_vreg_enable_load[] = {
+ 21800, 36000
+};
+
static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -3711,6 +3716,7 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.reset_list = sc7180_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v3_usb3phy_regs_layout,
@@ -3749,6 +3755,7 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.reset_list = sc7180_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v3_usb3phy_regs_layout,
@@ -3940,6 +3947,7 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
@@ -4009,6 +4017,7 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.reset_list = sc7180_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v3_usb3phy_regs_layout,
@@ -4072,6 +4081,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
@@ -4139,6 +4149,7 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
@@ -5008,6 +5019,11 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
return 0;
}
+ if (cfg->vreg_enable_load) {
+ for (i = 0; i < cfg->num_vregs; i++)
+ regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_enable_load[i]);
+ }
+
/* turn on regulator supplies */
ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
if (ret) {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 2/3] phy: qcom-qmp: add regulator_set_load to dp phy
@ 2022-05-20 16:27 ` Kuogee Hsieh
0 siblings, 0 replies; 10+ messages in thread
From: Kuogee Hsieh @ 2022-05-20 16:27 UTC (permalink / raw)
To: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, bjorn.andersson
Cc: Kuogee Hsieh, quic_abhinavk, quic_aravindh, quic_sbillaka,
freedreno, linux-arm-msm, linux-kernel
This patch add regulator_set_load() before enable regulator at
DP phy driver.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b144ae1..fcf87ae 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3130,6 +3130,7 @@ struct qmp_phy_cfg {
int num_resets;
/* regulators to be requested */
const char * const *vreg_list;
+ const unsigned int *vreg_enable_load;
int num_vregs;
/* array of registers with different offsets */
@@ -3346,6 +3347,10 @@ static const char * const qmp_phy_vreg_l[] = {
"vdda-phy", "vdda-pll",
};
+static const unsigned int qmp_phy_vreg_enable_load[] = {
+ 21800, 36000
+};
+
static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -3711,6 +3716,7 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.reset_list = sc7180_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v3_usb3phy_regs_layout,
@@ -3749,6 +3755,7 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.reset_list = sc7180_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v3_usb3phy_regs_layout,
@@ -3940,6 +3947,7 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
@@ -4009,6 +4017,7 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.reset_list = sc7180_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v3_usb3phy_regs_layout,
@@ -4072,6 +4081,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
@@ -4139,6 +4149,7 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
+ .vreg_enable_load = qmp_phy_vreg_enable_load,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
@@ -5008,6 +5019,11 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
return 0;
}
+ if (cfg->vreg_enable_load) {
+ for (i = 0; i < cfg->num_vregs; i++)
+ regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_enable_load[i]);
+ }
+
/* turn on regulator supplies */
ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
if (ret) {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v8 3/3] drm/msm/dp: delete vdda regulator related functions from eDP/DP controller
2022-05-20 16:26 ` Kuogee Hsieh
@ 2022-05-20 16:27 ` Kuogee Hsieh
-1 siblings, 0 replies; 10+ messages in thread
From: Kuogee Hsieh @ 2022-05-20 16:27 UTC (permalink / raw)
To: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, bjorn.andersson
Cc: quic_sbillaka, linux-arm-msm, quic_abhinavk, Kuogee Hsieh,
quic_aravindh, freedreno, linux-kernel
Vdda regulators are related to both eDP and DP phy so that it should be
managed at eDP and DP phy driver instead of controller. This patch removes
vdda regulators related functions out of eDP/DP controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------
drivers/gpu/drm/msm/dp/dp_parser.h | 6 ---
drivers/gpu/drm/msm/dp/dp_power.c | 95 +-------------------------------------
3 files changed, 2 insertions(+), 113 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index 8f9fed9..4ef2130 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -22,14 +22,6 @@
#define DP_DEFAULT_P0_OFFSET 0x1000
#define DP_DEFAULT_P0_SIZE 0x0400
-static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
- .num = 2,
- .regs = {
- {"vdda-1p2", 21800, 4 }, /* 1.2 V */
- {"vdda-0p9", 36000, 32 }, /* 0.9 V */
- },
-};
-
static void __iomem *dp_ioremap(struct platform_device *pdev, int idx, size_t *len)
{
struct resource *res;
@@ -298,12 +290,6 @@ static int dp_parser_parse(struct dp_parser *parser)
if (rc)
return rc;
- /* Map the corresponding regulator information according to
- * version. Currently, since we only have one supported platform,
- * mapping the regulator directly.
- */
- parser->regulator_cfg = &sdm845_dp_reg_cfg;
-
return 0;
}
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
index 3a4d797..b56b4d7 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.h
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -101,11 +101,6 @@ struct dp_reg_entry {
int disable_load;
};
-struct dp_regulator_cfg {
- int num;
- struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
-};
-
/**
* struct dp_parser - DP parser's data exposed to clients
*
@@ -121,7 +116,6 @@ struct dp_parser {
struct dp_pinctrl pinctrl;
struct dp_io io;
struct dp_display_data disp_data;
- const struct dp_regulator_cfg *regulator_cfg;
u32 max_dp_lanes;
struct drm_bridge *next_bridge;
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
index d9e0117..b52ac1d 100644
--- a/drivers/gpu/drm/msm/dp/dp_power.c
+++ b/drivers/gpu/drm/msm/dp/dp_power.c
@@ -20,82 +20,10 @@ struct dp_power_private {
struct clk *link_clk_src;
struct clk *pixel_provider;
struct clk *link_provider;
- struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
struct dp_power dp_power;
};
-static void dp_power_regulator_disable(struct dp_power_private *power)
-{
- struct regulator_bulk_data *s = power->supplies;
- const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
- int num = power->parser->regulator_cfg->num;
- int i;
-
- DBG("");
- for (i = num - 1; i >= 0; i--)
- if (regs[i].disable_load >= 0)
- regulator_set_load(s[i].consumer,
- regs[i].disable_load);
-
- regulator_bulk_disable(num, s);
-}
-
-static int dp_power_regulator_enable(struct dp_power_private *power)
-{
- struct regulator_bulk_data *s = power->supplies;
- const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
- int num = power->parser->regulator_cfg->num;
- int ret, i;
-
- DBG("");
- for (i = 0; i < num; i++) {
- if (regs[i].enable_load >= 0) {
- ret = regulator_set_load(s[i].consumer,
- regs[i].enable_load);
- if (ret < 0) {
- pr_err("regulator %d set op mode failed, %d\n",
- i, ret);
- goto fail;
- }
- }
- }
-
- ret = regulator_bulk_enable(num, s);
- if (ret < 0) {
- pr_err("regulator enable failed, %d\n", ret);
- goto fail;
- }
-
- return 0;
-
-fail:
- for (i--; i >= 0; i--)
- regulator_set_load(s[i].consumer, regs[i].disable_load);
- return ret;
-}
-
-static int dp_power_regulator_init(struct dp_power_private *power)
-{
- struct regulator_bulk_data *s = power->supplies;
- const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
- struct platform_device *pdev = power->pdev;
- int num = power->parser->regulator_cfg->num;
- int i, ret;
-
- for (i = 0; i < num; i++)
- s[i].supply = regs[i].name;
-
- ret = devm_regulator_bulk_get(&pdev->dev, num, s);
- if (ret < 0) {
- pr_err("%s: failed to init regulator, ret=%d\n",
- __func__, ret);
- return ret;
- }
-
- return 0;
-}
-
static int dp_power_clk_init(struct dp_power_private *power)
{
int rc = 0;
@@ -318,21 +246,10 @@ int dp_power_client_init(struct dp_power *dp_power)
pm_runtime_enable(&power->pdev->dev);
- rc = dp_power_regulator_init(power);
- if (rc) {
- DRM_ERROR("failed to init regulators %d\n", rc);
- goto error;
- }
-
rc = dp_power_clk_init(power);
- if (rc) {
+ if (rc)
DRM_ERROR("failed to init clocks %d\n", rc);
- goto error;
- }
- return 0;
-error:
- pm_runtime_disable(&power->pdev->dev);
return rc;
}
@@ -365,22 +282,15 @@ int dp_power_init(struct dp_power *dp_power, bool flip)
power = container_of(dp_power, struct dp_power_private, dp_power);
pm_runtime_get_sync(&power->pdev->dev);
- rc = dp_power_regulator_enable(power);
- if (rc) {
- DRM_ERROR("failed to enable regulators, %d\n", rc);
- goto exit;
- }
rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
if (rc) {
DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
- goto err_clk;
+ goto exit;
}
return 0;
-err_clk:
- dp_power_regulator_disable(power);
exit:
pm_runtime_put_sync(&power->pdev->dev);
return rc;
@@ -393,7 +303,6 @@ int dp_power_deinit(struct dp_power *dp_power)
power = container_of(dp_power, struct dp_power_private, dp_power);
dp_power_clk_enable(dp_power, DP_CORE_PM, false);
- dp_power_regulator_disable(power);
pm_runtime_put_sync(&power->pdev->dev);
return 0;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 3/3] drm/msm/dp: delete vdda regulator related functions from eDP/DP controller
@ 2022-05-20 16:27 ` Kuogee Hsieh
0 siblings, 0 replies; 10+ messages in thread
From: Kuogee Hsieh @ 2022-05-20 16:27 UTC (permalink / raw)
To: dri-devel, robdclark, sean, swboyd, dianders, vkoul, daniel,
airlied, agross, dmitry.baryshkov, bjorn.andersson
Cc: Kuogee Hsieh, quic_abhinavk, quic_aravindh, quic_sbillaka,
freedreno, linux-arm-msm, linux-kernel
Vdda regulators are related to both eDP and DP phy so that it should be
managed at eDP and DP phy driver instead of controller. This patch removes
vdda regulators related functions out of eDP/DP controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dp/dp_parser.c | 14 ------
drivers/gpu/drm/msm/dp/dp_parser.h | 6 ---
drivers/gpu/drm/msm/dp/dp_power.c | 95 +-------------------------------------
3 files changed, 2 insertions(+), 113 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index 8f9fed9..4ef2130 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -22,14 +22,6 @@
#define DP_DEFAULT_P0_OFFSET 0x1000
#define DP_DEFAULT_P0_SIZE 0x0400
-static const struct dp_regulator_cfg sdm845_dp_reg_cfg = {
- .num = 2,
- .regs = {
- {"vdda-1p2", 21800, 4 }, /* 1.2 V */
- {"vdda-0p9", 36000, 32 }, /* 0.9 V */
- },
-};
-
static void __iomem *dp_ioremap(struct platform_device *pdev, int idx, size_t *len)
{
struct resource *res;
@@ -298,12 +290,6 @@ static int dp_parser_parse(struct dp_parser *parser)
if (rc)
return rc;
- /* Map the corresponding regulator information according to
- * version. Currently, since we only have one supported platform,
- * mapping the regulator directly.
- */
- parser->regulator_cfg = &sdm845_dp_reg_cfg;
-
return 0;
}
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
index 3a4d797..b56b4d7 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.h
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -101,11 +101,6 @@ struct dp_reg_entry {
int disable_load;
};
-struct dp_regulator_cfg {
- int num;
- struct dp_reg_entry regs[DP_DEV_REGULATOR_MAX];
-};
-
/**
* struct dp_parser - DP parser's data exposed to clients
*
@@ -121,7 +116,6 @@ struct dp_parser {
struct dp_pinctrl pinctrl;
struct dp_io io;
struct dp_display_data disp_data;
- const struct dp_regulator_cfg *regulator_cfg;
u32 max_dp_lanes;
struct drm_bridge *next_bridge;
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
index d9e0117..b52ac1d 100644
--- a/drivers/gpu/drm/msm/dp/dp_power.c
+++ b/drivers/gpu/drm/msm/dp/dp_power.c
@@ -20,82 +20,10 @@ struct dp_power_private {
struct clk *link_clk_src;
struct clk *pixel_provider;
struct clk *link_provider;
- struct regulator_bulk_data supplies[DP_DEV_REGULATOR_MAX];
struct dp_power dp_power;
};
-static void dp_power_regulator_disable(struct dp_power_private *power)
-{
- struct regulator_bulk_data *s = power->supplies;
- const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
- int num = power->parser->regulator_cfg->num;
- int i;
-
- DBG("");
- for (i = num - 1; i >= 0; i--)
- if (regs[i].disable_load >= 0)
- regulator_set_load(s[i].consumer,
- regs[i].disable_load);
-
- regulator_bulk_disable(num, s);
-}
-
-static int dp_power_regulator_enable(struct dp_power_private *power)
-{
- struct regulator_bulk_data *s = power->supplies;
- const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
- int num = power->parser->regulator_cfg->num;
- int ret, i;
-
- DBG("");
- for (i = 0; i < num; i++) {
- if (regs[i].enable_load >= 0) {
- ret = regulator_set_load(s[i].consumer,
- regs[i].enable_load);
- if (ret < 0) {
- pr_err("regulator %d set op mode failed, %d\n",
- i, ret);
- goto fail;
- }
- }
- }
-
- ret = regulator_bulk_enable(num, s);
- if (ret < 0) {
- pr_err("regulator enable failed, %d\n", ret);
- goto fail;
- }
-
- return 0;
-
-fail:
- for (i--; i >= 0; i--)
- regulator_set_load(s[i].consumer, regs[i].disable_load);
- return ret;
-}
-
-static int dp_power_regulator_init(struct dp_power_private *power)
-{
- struct regulator_bulk_data *s = power->supplies;
- const struct dp_reg_entry *regs = power->parser->regulator_cfg->regs;
- struct platform_device *pdev = power->pdev;
- int num = power->parser->regulator_cfg->num;
- int i, ret;
-
- for (i = 0; i < num; i++)
- s[i].supply = regs[i].name;
-
- ret = devm_regulator_bulk_get(&pdev->dev, num, s);
- if (ret < 0) {
- pr_err("%s: failed to init regulator, ret=%d\n",
- __func__, ret);
- return ret;
- }
-
- return 0;
-}
-
static int dp_power_clk_init(struct dp_power_private *power)
{
int rc = 0;
@@ -318,21 +246,10 @@ int dp_power_client_init(struct dp_power *dp_power)
pm_runtime_enable(&power->pdev->dev);
- rc = dp_power_regulator_init(power);
- if (rc) {
- DRM_ERROR("failed to init regulators %d\n", rc);
- goto error;
- }
-
rc = dp_power_clk_init(power);
- if (rc) {
+ if (rc)
DRM_ERROR("failed to init clocks %d\n", rc);
- goto error;
- }
- return 0;
-error:
- pm_runtime_disable(&power->pdev->dev);
return rc;
}
@@ -365,22 +282,15 @@ int dp_power_init(struct dp_power *dp_power, bool flip)
power = container_of(dp_power, struct dp_power_private, dp_power);
pm_runtime_get_sync(&power->pdev->dev);
- rc = dp_power_regulator_enable(power);
- if (rc) {
- DRM_ERROR("failed to enable regulators, %d\n", rc);
- goto exit;
- }
rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true);
if (rc) {
DRM_ERROR("failed to enable DP core clocks, %d\n", rc);
- goto err_clk;
+ goto exit;
}
return 0;
-err_clk:
- dp_power_regulator_disable(power);
exit:
pm_runtime_put_sync(&power->pdev->dev);
return rc;
@@ -393,7 +303,6 @@ int dp_power_deinit(struct dp_power *dp_power)
power = container_of(dp_power, struct dp_power_private, dp_power);
dp_power_clk_enable(dp_power, DP_CORE_PM, false);
- dp_power_regulator_disable(power);
pm_runtime_put_sync(&power->pdev->dev);
return 0;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 10+ messages in thread