All of lore.kernel.org
 help / color / mirror / Atom feed
* [V2 0/6] Miscellaneous PAS fixes
@ 2022-05-30  6:22 Sibi Sankar
  2022-05-30  6:22 ` [V2 1/6] remoteproc: qcom: pas: Add decrypt shutdown support for modem Sibi Sankar
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Sibi Sankar @ 2022-05-30  6:22 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, mathieu.poirier, dmitry.baryshkov, linux-arm-msm,
	linux-remoteproc, linux-kernel, konrad.dybcio, Sibi Sankar

A collection of misc. fixes for the remoteproc PAS and sysmon driver.

V2:
 * Add misc. sysmon fix.
 * Dropping patch 1 and 6 from V1.

Sibi Sankar (1):
  remoteproc: qcom: pas: Add decrypt shutdown support for modem

Siddharth Gupta (5):
  remoteproc: qcom: pas: Mark va as io memory
  remoteproc: qcom: pas: Mark devices as wakeup capable
  remoteproc: qcom: pas: Check if coredump is enabled
  remoteproc: q6v5: Set q6 state to offline on receiving wdog irq
  remoteproc: sysmon: Send sysmon state only for running rprocs

 drivers/remoteproc/qcom_q6v5.c     |  4 ++
 drivers/remoteproc/qcom_q6v5_pas.c | 77 +++++++++++++++++++++++++++++++++++++-
 drivers/remoteproc/qcom_sysmon.c   |  6 ++-
 3 files changed, 83 insertions(+), 4 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [V2 1/6] remoteproc: qcom: pas: Add decrypt shutdown support for modem
  2022-05-30  6:22 [V2 0/6] Miscellaneous PAS fixes Sibi Sankar
@ 2022-05-30  6:22 ` Sibi Sankar
  2022-05-30  6:22 ` [V2 2/6] remoteproc: qcom: pas: Mark va as io memory Sibi Sankar
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Sibi Sankar @ 2022-05-30  6:22 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, mathieu.poirier, dmitry.baryshkov, linux-arm-msm,
	linux-remoteproc, linux-kernel, konrad.dybcio, Sibi Sankar

The initial shutdown request to modem on SM8450 SoCs would start the
decryption process and will keep returning errors until the modem shutdown
is complete. Fix this by retrying shutdowns in fixed intervals.

Err Logs on modem shutdown:
qcom_q6v5_pas 4080000.remoteproc: failed to shutdown: -22
remoteproc remoteproc3: can't stop rproc: -22

Fixes: 5cef9b48458d ("remoteproc: qcom: pas: Add SM8450 remoteproc support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 67 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 6ae39c5653b1..02435810dc7c 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -29,6 +30,8 @@
 #include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
+#define ADSP_DECRYPT_SHUTDOWN_DELAY_MS	100
+
 struct adsp_data {
 	int crash_reason_smem;
 	const char *firmware_name;
@@ -36,6 +39,7 @@ struct adsp_data {
 	unsigned int minidump_id;
 	bool has_aggre2_clk;
 	bool auto_boot;
+	bool decrypt_shutdown;
 
 	char **proxy_pd_names;
 
@@ -65,6 +69,7 @@ struct qcom_adsp {
 	unsigned int minidump_id;
 	int crash_reason_smem;
 	bool has_aggre2_clk;
+	bool decrypt_shutdown;
 	const char *info_name;
 
 	struct completion start_done;
@@ -128,6 +133,20 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
 	}
 }
 
+static int adsp_decrypt_shutdown(struct qcom_adsp *adsp)
+{
+	int retry_num = 50;
+	int ret = -EINVAL;
+
+	while (retry_num && ret) {
+		msleep(ADSP_DECRYPT_SHUTDOWN_DELAY_MS);
+		ret = qcom_scm_pas_shutdown(adsp->pas_id);
+		retry_num--;
+	}
+
+	return ret;
+}
+
 static int adsp_unprepare(struct rproc *rproc)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
@@ -249,6 +268,9 @@ static int adsp_stop(struct rproc *rproc)
 		dev_err(adsp->dev, "timed out on wait\n");
 
 	ret = qcom_scm_pas_shutdown(adsp->pas_id);
+	if (ret && adsp->decrypt_shutdown)
+		ret = adsp_decrypt_shutdown(adsp);
+
 	if (ret)
 		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
 
@@ -459,6 +481,7 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->pas_id = desc->pas_id;
 	adsp->has_aggre2_clk = desc->has_aggre2_clk;
 	adsp->info_name = desc->sysmon_name;
+	adsp->decrypt_shutdown = desc->decrypt_shutdown;
 	platform_set_drvdata(pdev, adsp);
 
 	device_wakeup_enable(adsp->dev);
@@ -533,6 +556,7 @@ static const struct adsp_data adsp_resource_init = {
 		.pas_id = 1,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
+		.decrypt_shutdown = false,
 		.ssr_name = "lpass",
 		.sysmon_name = "adsp",
 		.ssctl_id = 0x14,
@@ -544,6 +568,7 @@ static const struct adsp_data sdm845_adsp_resource_init = {
 		.pas_id = 1,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
+		.decrypt_shutdown = false,
 		.load_state = "adsp",
 		.ssr_name = "lpass",
 		.sysmon_name = "adsp",
@@ -556,6 +581,7 @@ static const struct adsp_data sm6350_adsp_resource = {
 	.pas_id = 1,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
@@ -573,6 +599,7 @@ static const struct adsp_data sm8150_adsp_resource = {
 		.pas_id = 1,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
+		.decrypt_shutdown = false,
 		.proxy_pd_names = (char*[]){
 			"cx",
 			NULL
@@ -589,6 +616,7 @@ static const struct adsp_data sm8250_adsp_resource = {
 	.pas_id = 1,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
@@ -606,6 +634,7 @@ static const struct adsp_data sm8350_adsp_resource = {
 	.pas_id = 1,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
@@ -623,6 +652,7 @@ static const struct adsp_data msm8996_adsp_resource = {
 		.pas_id = 1,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
+		.decrypt_shutdown = false,
 		.proxy_pd_names = (char*[]){
 			"cx",
 			NULL
@@ -638,6 +668,7 @@ static const struct adsp_data cdsp_resource_init = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
@@ -649,6 +680,7 @@ static const struct adsp_data sdm845_cdsp_resource_init = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.load_state = "cdsp",
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
@@ -661,6 +693,7 @@ static const struct adsp_data sm6350_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mx",
@@ -678,6 +711,7 @@ static const struct adsp_data sm8150_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
@@ -694,6 +728,7 @@ static const struct adsp_data sm8250_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
@@ -710,6 +745,7 @@ static const struct adsp_data sc8280xp_nsp0_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"nsp",
 		NULL
@@ -725,6 +761,7 @@ static const struct adsp_data sc8280xp_nsp1_resource = {
 	.pas_id = 30,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"nsp",
 		NULL
@@ -740,6 +777,7 @@ static const struct adsp_data sm8350_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mxc",
@@ -758,6 +796,7 @@ static const struct adsp_data mpss_resource_init = {
 	.minidump_id = 3,
 	.has_aggre2_clk = false,
 	.auto_boot = false,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mss",
@@ -775,6 +814,7 @@ static const struct adsp_data sc8180x_mpss_resource = {
 	.pas_id = 4,
 	.has_aggre2_clk = false,
 	.auto_boot = false,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
@@ -791,6 +831,7 @@ static const struct adsp_data slpi_resource_init = {
 		.pas_id = 12,
 		.has_aggre2_clk = true,
 		.auto_boot = true,
+		.decrypt_shutdown = false,
 		.proxy_pd_names = (char*[]){
 			"ssc_cx",
 			NULL
@@ -806,6 +847,7 @@ static const struct adsp_data sm8150_slpi_resource = {
 		.pas_id = 12,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
+		.decrypt_shutdown = false,
 		.proxy_pd_names = (char*[]){
 			"lcx",
 			"lmx",
@@ -823,6 +865,7 @@ static const struct adsp_data sm8250_slpi_resource = {
 	.pas_id = 12,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
@@ -840,6 +883,7 @@ static const struct adsp_data sm8350_slpi_resource = {
 	.pas_id = 12,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
@@ -856,6 +900,7 @@ static const struct adsp_data wcss_resource_init = {
 	.firmware_name = "wcnss.mdt",
 	.pas_id = 6,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.ssr_name = "mpss",
 	.sysmon_name = "wcnss",
 	.ssctl_id = 0x12,
@@ -867,6 +912,7 @@ static const struct adsp_data sdx55_mpss_resource = {
 	.pas_id = 4,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
+	.decrypt_shutdown = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mss",
@@ -877,6 +923,25 @@ static const struct adsp_data sdx55_mpss_resource = {
 	.ssctl_id = 0x22,
 };
 
+static const struct adsp_data sm8450_mpss_resource = {
+	.crash_reason_smem = 421,
+	.firmware_name = "modem.mdt",
+	.pas_id = 4,
+	.minidump_id = 3,
+	.has_aggre2_clk = false,
+	.auto_boot = false,
+	.decrypt_shutdown = true,
+	.proxy_pd_names = (char*[]){
+		"cx",
+		"mss",
+		NULL
+	},
+	.load_state = "modem",
+	.ssr_name = "mpss",
+	.sysmon_name = "modem",
+	.ssctl_id = 0x12,
+};
+
 static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init},
 	{ .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
@@ -916,7 +981,7 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sm8450-adsp-pas", .data = &sm8350_adsp_resource},
 	{ .compatible = "qcom,sm8450-cdsp-pas", .data = &sm8350_cdsp_resource},
 	{ .compatible = "qcom,sm8450-slpi-pas", .data = &sm8350_slpi_resource},
-	{ .compatible = "qcom,sm8450-mpss-pas", .data = &mpss_resource_init},
+	{ .compatible = "qcom,sm8450-mpss-pas", .data = &sm8450_mpss_resource},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, adsp_of_match);
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [V2 2/6] remoteproc: qcom: pas: Mark va as io memory
  2022-05-30  6:22 [V2 0/6] Miscellaneous PAS fixes Sibi Sankar
  2022-05-30  6:22 ` [V2 1/6] remoteproc: qcom: pas: Add decrypt shutdown support for modem Sibi Sankar
@ 2022-05-30  6:22 ` Sibi Sankar
  2022-05-30  6:22 ` [V2 3/6] remoteproc: qcom: pas: Mark devices as wakeup capable Sibi Sankar
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Sibi Sankar @ 2022-05-30  6:22 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, mathieu.poirier, dmitry.baryshkov, linux-arm-msm,
	linux-remoteproc, linux-kernel, konrad.dybcio, Siddharth Gupta,
	Sibi Sankar

From: Siddharth Gupta <sidgup@codeaurora.org>

The pas driver remaps the entire carveout region using the dev_ioremap_wc()
call, which is then used in the adsp_da_to_va() calls made by the rproc
framework. This change marks the va returned by this call as an iomem va.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 02435810dc7c..eb817809d5d4 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -290,6 +290,9 @@ static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iom
 	if (offset < 0 || offset + len > adsp->mem_size)
 		return NULL;
 
+	if (is_iomem)
+		*is_iomem = true;
+
 	return adsp->mem_region + offset;
 }
 
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [V2 3/6] remoteproc: qcom: pas: Mark devices as wakeup capable
  2022-05-30  6:22 [V2 0/6] Miscellaneous PAS fixes Sibi Sankar
  2022-05-30  6:22 ` [V2 1/6] remoteproc: qcom: pas: Add decrypt shutdown support for modem Sibi Sankar
  2022-05-30  6:22 ` [V2 2/6] remoteproc: qcom: pas: Mark va as io memory Sibi Sankar
@ 2022-05-30  6:22 ` Sibi Sankar
  2022-05-30  6:22 ` [V2 4/6] remoteproc: qcom: pas: Check if coredump is enabled Sibi Sankar
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Sibi Sankar @ 2022-05-30  6:22 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, mathieu.poirier, dmitry.baryshkov, linux-arm-msm,
	linux-remoteproc, linux-kernel, konrad.dybcio, Siddharth Gupta,
	Sibi Sankar

From: Siddharth Gupta <sidgup@codeaurora.org>

device_wakeup_enable() on its own is not capable of setting
device as wakeup capable, it needs to be used in conjunction
with device_set_wakeup_capable(). The device_init_wakeup()
calls both these functions on the device passed.

Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index eb817809d5d4..22736723448a 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -487,7 +487,9 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->decrypt_shutdown = desc->decrypt_shutdown;
 	platform_set_drvdata(pdev, adsp);
 
-	device_wakeup_enable(adsp->dev);
+	ret = device_init_wakeup(adsp->dev, true);
+	if (ret)
+		goto free_rproc;
 
 	ret = adsp_alloc_memory_region(adsp);
 	if (ret)
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [V2 4/6] remoteproc: qcom: pas: Check if coredump is enabled
  2022-05-30  6:22 [V2 0/6] Miscellaneous PAS fixes Sibi Sankar
                   ` (2 preceding siblings ...)
  2022-05-30  6:22 ` [V2 3/6] remoteproc: qcom: pas: Mark devices as wakeup capable Sibi Sankar
@ 2022-05-30  6:22 ` Sibi Sankar
  2022-05-30  6:22 ` [V2 5/6] remoteproc: q6v5: Set q6 state to offline on receiving wdog irq Sibi Sankar
  2022-05-30  6:22 ` [V2 6/6] remoteproc: sysmon: Send sysmon state only for running rprocs Sibi Sankar
  5 siblings, 0 replies; 7+ messages in thread
From: Sibi Sankar @ 2022-05-30  6:22 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, mathieu.poirier, dmitry.baryshkov, linux-arm-msm,
	linux-remoteproc, linux-kernel, konrad.dybcio, Siddharth Gupta,
	Sibi Sankar

From: Siddharth Gupta <sidgup@codeaurora.org>

Client drivers need to check if coredump is enabled for the rproc before
continuing with coredump generation. This change adds a check in the PAS
driver.

Fixes: 8ed8485c4f05 ("remoteproc: qcom: Add capability to collect minidumps")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 22736723448a..dd3f89fbac78 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -92,6 +92,9 @@ static void adsp_minidump(struct rproc *rproc)
 {
 	struct qcom_adsp *adsp = rproc->priv;
 
+	if (rproc->dump_conf == RPROC_COREDUMP_DISABLED)
+		return;
+
 	qcom_minidump(rproc, adsp->minidump_id);
 }
 
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [V2 5/6] remoteproc: q6v5: Set q6 state to offline on receiving wdog irq
  2022-05-30  6:22 [V2 0/6] Miscellaneous PAS fixes Sibi Sankar
                   ` (3 preceding siblings ...)
  2022-05-30  6:22 ` [V2 4/6] remoteproc: qcom: pas: Check if coredump is enabled Sibi Sankar
@ 2022-05-30  6:22 ` Sibi Sankar
  2022-05-30  6:22 ` [V2 6/6] remoteproc: sysmon: Send sysmon state only for running rprocs Sibi Sankar
  5 siblings, 0 replies; 7+ messages in thread
From: Sibi Sankar @ 2022-05-30  6:22 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, mathieu.poirier, dmitry.baryshkov, linux-arm-msm,
	linux-remoteproc, linux-kernel, konrad.dybcio, Siddharth Gupta,
	Sibi Sankar

From: Siddharth Gupta <sidgup@codeaurora.org>

Due to firmware bugs on the Q6 the hardware watchdog irq can be triggered
multiple times. As the remoteproc framework schedules work items for the
recovery process, if the other threads do not get a chance to run before
recovery is completed the proceeding threads will see the state of the
remoteproc as running and kill the remoteproc while it is running. This
can result in various SMMU and NOC errors. This change sets the state of
the remoteproc to offline whenever a watchdog irq is received.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 5280ec9b5449..497acfb33f8f 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -112,6 +112,7 @@ static irqreturn_t q6v5_wdog_interrupt(int irq, void *data)
 	else
 		dev_err(q6v5->dev, "watchdog without message\n");
 
+	q6v5->running = false;
 	rproc_report_crash(q6v5->rproc, RPROC_WATCHDOG);
 
 	return IRQ_HANDLED;
@@ -123,6 +124,9 @@ static irqreturn_t q6v5_fatal_interrupt(int irq, void *data)
 	size_t len;
 	char *msg;
 
+	if (!q6v5->running)
+		return IRQ_HANDLED;
+
 	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
 	if (!IS_ERR(msg) && len > 0 && msg[0])
 		dev_err(q6v5->dev, "fatal error received: %s\n", msg);
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [V2 6/6] remoteproc: sysmon: Send sysmon state only for running rprocs
  2022-05-30  6:22 [V2 0/6] Miscellaneous PAS fixes Sibi Sankar
                   ` (4 preceding siblings ...)
  2022-05-30  6:22 ` [V2 5/6] remoteproc: q6v5: Set q6 state to offline on receiving wdog irq Sibi Sankar
@ 2022-05-30  6:22 ` Sibi Sankar
  5 siblings, 0 replies; 7+ messages in thread
From: Sibi Sankar @ 2022-05-30  6:22 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, mathieu.poirier, dmitry.baryshkov, linux-arm-msm,
	linux-remoteproc, linux-kernel, konrad.dybcio, Siddharth Gupta,
	Sibi Sankar

From: Siddharth Gupta <sidgup@codeaurora.org>

When a new remoteproc boots up, send the sysmon state notification
of only running remoteprocs. Sending state of remoteprocs booting
up in parallel can cause a race between SSR clients of the remoteproc
that is booting up and the sysmon notification for the same remoteproc,
resulting in an inconsistency between which state the remoteproc that
is booting up in parallel.

For example - if remoteproc A and B crash one after the other, after
remoteproc A boots up, if the remoteproc A tries to get the state of
remoteproc B before the sysmon subdevice for B is invoked but after
the ssr subdevice of B has been invoked, clients on remoteproc A
might get confused when the sysmon notification indicates a different
state.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/remoteproc/qcom_sysmon.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index a9f04dd83ab6..57dde2a69b9d 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -512,10 +512,12 @@ static int sysmon_start(struct rproc_subdev *subdev)
 
 	mutex_lock(&sysmon_lock);
 	list_for_each_entry(target, &sysmon_list, node) {
-		if (target == sysmon)
+		mutex_lock(&target->state_lock);
+		if (target == sysmon || target->state != SSCTL_SSR_EVENT_AFTER_POWERUP) {
+			mutex_unlock(&target->state_lock);
 			continue;
+		}
 
-		mutex_lock(&target->state_lock);
 		event.subsys_name = target->name;
 		event.ssr_event = target->state;
 
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2022-05-30  6:23 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-30  6:22 [V2 0/6] Miscellaneous PAS fixes Sibi Sankar
2022-05-30  6:22 ` [V2 1/6] remoteproc: qcom: pas: Add decrypt shutdown support for modem Sibi Sankar
2022-05-30  6:22 ` [V2 2/6] remoteproc: qcom: pas: Mark va as io memory Sibi Sankar
2022-05-30  6:22 ` [V2 3/6] remoteproc: qcom: pas: Mark devices as wakeup capable Sibi Sankar
2022-05-30  6:22 ` [V2 4/6] remoteproc: qcom: pas: Check if coredump is enabled Sibi Sankar
2022-05-30  6:22 ` [V2 5/6] remoteproc: q6v5: Set q6 state to offline on receiving wdog irq Sibi Sankar
2022-05-30  6:22 ` [V2 6/6] remoteproc: sysmon: Send sysmon state only for running rprocs Sibi Sankar

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.