[PATCH 00/11] Devicetree Changes SDX65

[PATCH 00/11] Devicetree Changes SDX65

[Rohit Agarwal]

This series adds cpufreq, watchdog dt nodes and enables 
remoteproc in sdx65 mtp.

Thanks,
Rohit.

Rohit Agarwal (11):
  ARM: dts: qcom: sdx65: Add CPUFreq support
  ARM: dts: qcom: sdx65: Add modem SMP2P node
  ARM: dts: qcom: sdx65: Add IMEM and PIL info region
  dt-bindings: firmware: scm: Add compatible for SDX65
  ARM: dts: qcom: sdx65: Add SCM node
  ARM: dts: qcom: sdx65: Add Modem remoteproc node
  ARM: dts: qcom: sdx65-mtp: Enable modem
  ARM: dts: qcom: sdx65-mtp: Increase the vmalloc size
  dt-bindings: watchdog: Add binding for Qcom SDX65
  ARM: dts: qcom: sdx65: Add Watchdog support
  ARM: dts: qcom: sdx65: Add pshold support

 .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
 .../devicetree/bindings/watchdog/qcom-wdt.yaml     |   1 +
 arch/arm/boot/dts/qcom-sdx65-mtp.dts               |   6 +
 arch/arm/boot/dts/qcom-sdx65.dtsi                  | 124 +++++++++++++++++++++
 4 files changed, 132 insertions(+)

-- 
2.7.4

[PATCH 01/11] ARM: dts: qcom: sdx65: Add CPUFreq support

[Rohit Agarwal]

Add CPUFreq support to SDX65 platform using the cpufreq-dt driver.
There is no dedicated hardware block available on this platform to
carry on the CPUFreq duties. Hence, it is accomplished using the CPU
clock and regulators tied together by the operating points table.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index a75e9f1..2530c4f 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -54,6 +54,35 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX65_CX_AO>;
+			power-domain-names = "rpmhpd";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			required-opps = <&rpmhpd_opp_turbo>;
 		};
 	};
 
-- 
2.7.4

[PATCH 02/11] ARM: dts: qcom: sdx65: Add modem SMP2P node

[Rohit Agarwal]

Add SMP2P nodes for the SDX65 platform to communicate with the modem.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 2530c4f..669721e 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -150,6 +150,37 @@
 		};
 	};
 
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.7.4

[PATCH 03/11] ARM: dts: qcom: sdx65: Add IMEM and PIL info region

[Rohit Agarwal]

Add a simple-mfd representing IMEM on SDX65 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteproc.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 669721e..10e3226 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -395,6 +395,19 @@
 			interrupt-controller;
 		};
 
+		imem@1468f000 {
+			compatible = "simple-mfd";
+			reg = <0x1468f000 0x1000>;
+			ranges = <0x0 0x1468f000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x40000>;
-- 
2.7.4

[PATCH 04/11] dt-bindings: firmware: scm: Add compatible for SDX65

[Rohit Agarwal]

Add devicetree compatible for SCM present in SDX65 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 Documentation/devicetree/bindings/firmware/qcom,scm.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index b1cd4ad..a05c00a 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -26,6 +26,7 @@ Required properties:
  * "qcom,scm-sc7280"
  * "qcom,scm-sdm845"
  * "qcom,scm-sdx55"
+ * "qcom,scm-sdx65"
  * "qcom,scm-sm6350"
  * "qcom,scm-sm8150"
  * "qcom,scm-sm8250"
-- 
2.7.4

[PATCH 05/11] ARM: dts: qcom: sdx65: Add SCM node

[Rohit Agarwal]

Add SCM node to enable SCM functionality on SDX65 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 10e3226..ec08ae1 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -86,6 +86,12 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx65", "qcom,scm";
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
-- 
2.7.4

[PATCH 06/11] ARM: dts: qcom: sdx65: Add Modem remoteproc node

[Rohit Agarwal]

Add modem support to SDX65 using the PAS remoteproc driver.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index ec08ae1..5e4687d 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -305,6 +305,39 @@
 			#hwlock-cells = <1>;
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx55-mpss-pas";
+			reg = <0x04080000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SDX65_CX>,
+					<&rpmhpd SDX65_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs 15>;
+			};
+		};
+
 		sdhc_1: sdhci@8804000 {
 			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x08804000 0x1000>;
-- 
2.7.4

[PATCH 07/11] ARM: dts: qcom: sdx65-mtp: Enable modem

[Rohit Agarwal]

Enable modem on SDX65 MTP board.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index e747ec0..85ea02d 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -264,6 +264,11 @@
 	};
 };
 
+&remoteproc_mpss {
+	status = "okay";
+	memory-region = <&mpss_adsp_mem>;
+};
+
 &usb {
 	status = "okay";
 };
-- 
2.7.4

[PATCH 08/11] ARM: dts: qcom: sdx65-mtp: Increase the vmalloc size

[Rohit Agarwal]

Increase the size of vmalloc using the bootargs in sdx65
mtp board.
It is failing to alloacte the size needed for firmware and
giving the error logs due to actual vmalloc region lesser than requested.

cat /proc/meminfo shows the size of VmallocTotal as 245760 kB.

[ 10.980356] vmap allocation for size 268439552 failed: use vmalloc=<size> to increase size
[ 10.980505] qcom_q6v5_pas 4080000.remoteproc: unable to map memory region: 0x90800000+10000000
[ 10.988542] In adsp alloc memory: adsp_probe 482
[ 10.988592] remoteproc remoteproc0: releasing 4080000.remoteproc
[ 11.001598] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -16

Thus, increasing the size to 300000000 as modem is not the only one using vmalloc region.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 85ea02d..966385f 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -21,6 +21,7 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs = "vmalloc=300000000";
 	};
 
 	reserved-memory {
-- 
2.7.4

[PATCH 09/11] dt-bindings: watchdog: Add binding for Qcom SDX65

[Rohit Agarwal]

Add devicetree binding for watchdog present in Qcom SDX65 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index 16c6f82..e0acbc1 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -20,6 +20,7 @@ properties:
       - qcom,apss-wdt-sc7280
       - qcom,apss-wdt-sdm845
       - qcom,apss-wdt-sdx55
+      - qcom,apss-wdt-sdx65
       - qcom,apss-wdt-sm6350
       - qcom,apss-wdt-sm8150
       - qcom,apss-wdt-sm8250
-- 
2.7.4

[PATCH 10/11] ARM: dts: qcom: sdx65: Add Watchdog support

[Rohit Agarwal]

Enable Watchdog support for Application Processor Subsystem (APSS) block
on SDX65 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 5e4687d..c76f330 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -513,6 +513,13 @@
 			#clock-cells = <0>;
 		};
 
+		watchdog@17817000 {
+			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
+			reg = <0x17817000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+
 		timer@17820000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-- 
2.7.4

[PATCH 11/11] ARM: dts: qcom: sdx65: Add pshold support

[Rohit Agarwal]

Add support for pshold block to drive pshold towards the PMIC, which is
used to trigger a configurable event such as reboot or poweroff of the
SDX65 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index c76f330..a249646 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -394,6 +394,11 @@
 			};
 		};
 
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0x0c264000 0x1000>;
+		};
+
 		spmi_bus: qcom,spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
-- 
2.7.4

Re: [PATCH 04/11] dt-bindings: firmware: scm: Add compatible for SDX65

[Krzysztof Kozlowski]

On 01/06/2022 12:45, Rohit Agarwal wrote:
> Add devicetree compatible for SCM present in SDX65 platform.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH 09/11] dt-bindings: watchdog: Add binding for Qcom SDX65

[Krzysztof Kozlowski]

On 01/06/2022 12:45, Rohit Agarwal wrote:
> Add devicetree binding for watchdog present in Qcom SDX65 platform.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH 10/11] ARM: dts: qcom: sdx65: Add Watchdog support

[Krzysztof Kozlowski]

On 01/06/2022 12:45, Rohit Agarwal wrote:
> Enable Watchdog support for Application Processor Subsystem (APSS) block
> on SDX65 platform.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
>  arch/arm/boot/dts/qcom-sdx65.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index 5e4687d..c76f330 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -513,6 +513,13 @@
>  			#clock-cells = <0>;
>  		};
>  
> +		watchdog@17817000 {
> +			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
> +			reg = <0x17817000 0x1000>;
> +			clocks = <&sleep_clk>;
> +		};
> +

Just one line break, please.



Best regards,
Krzysztof

Re: [PATCH 08/11] ARM: dts: qcom: sdx65-mtp: Increase the vmalloc size

[Krzysztof Kozlowski]

On 01/06/2022 12:45, Rohit Agarwal wrote:
> Increase the size of vmalloc using the bootargs in sdx65
> mtp board.
> It is failing to alloacte the size needed for firmware and
> giving the error logs due to actual vmalloc region lesser than requested.
> 
> cat /proc/meminfo shows the size of VmallocTotal as 245760 kB.
> 
> [ 10.980356] vmap allocation for size 268439552 failed: use vmalloc=<size> to increase size
> [ 10.980505] qcom_q6v5_pas 4080000.remoteproc: unable to map memory region: 0x90800000+10000000
> [ 10.988542] In adsp alloc memory: adsp_probe 482
> [ 10.988592] remoteproc remoteproc0: releasing 4080000.remoteproc
> [ 11.001598] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -16
> 
> Thus, increasing the size to 300000000 as modem is not the only one using vmalloc region.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
>  arch/arm/boot/dts/qcom-sdx65-mtp.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 85ea02d..966385f 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -21,6 +21,7 @@
>  
>  	chosen {
>  		stdout-path = "serial0:115200n8";
> +		bootargs = "vmalloc=300000000";

I understand that issue comes from SoC-related driver but this is not a
property of the hardware. This could be added by bootloader if needed,
but in regular case this is a system setup parameter, so it does not
belong to DTS.

Best regards,
Krzysztof

Re: [PATCH 09/11] dt-bindings: watchdog: Add binding for Qcom SDX65

[Guenter Roeck]

On 6/1/22 03:45, Rohit Agarwal wrote:
> Add devicetree binding for watchdog present in Qcom SDX65 platform.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> index 16c6f82..e0acbc1 100644
> --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> @@ -20,6 +20,7 @@ properties:
>         - qcom,apss-wdt-sc7280
>         - qcom,apss-wdt-sdm845
>         - qcom,apss-wdt-sdx55
> +      - qcom,apss-wdt-sdx65
>         - qcom,apss-wdt-sm6350
>         - qcom,apss-wdt-sm8150
>         - qcom,apss-wdt-sm8250

Re: (subset) [PATCH 00/11] Devicetree Changes SDX65

[Bjorn Andersson]

On Wed, 1 Jun 2022 16:15:01 +0530, Rohit Agarwal wrote:
> This series adds cpufreq, watchdog dt nodes and enables
> remoteproc in sdx65 mtp.
> 
> Thanks,
> Rohit.
> 
> Rohit Agarwal (11):
>   ARM: dts: qcom: sdx65: Add CPUFreq support
>   ARM: dts: qcom: sdx65: Add modem SMP2P node
>   ARM: dts: qcom: sdx65: Add IMEM and PIL info region
>   dt-bindings: firmware: scm: Add compatible for SDX65
>   ARM: dts: qcom: sdx65: Add SCM node
>   ARM: dts: qcom: sdx65: Add Modem remoteproc node
>   ARM: dts: qcom: sdx65-mtp: Enable modem
>   ARM: dts: qcom: sdx65-mtp: Increase the vmalloc size
>   dt-bindings: watchdog: Add binding for Qcom SDX65
>   ARM: dts: qcom: sdx65: Add Watchdog support
>   ARM: dts: qcom: sdx65: Add pshold support
> 
> [...]

Applied, thanks!

[01/11] ARM: dts: qcom: sdx65: Add CPUFreq support
        commit: b427679adcddf9d56b28175d435fc7ec4d4c99ef
[02/11] ARM: dts: qcom: sdx65: Add modem SMP2P node
        commit: 7f928c735880ed20e4d7670416aa7877b47a47d1
[03/11] ARM: dts: qcom: sdx65: Add IMEM and PIL info region
        commit: 69117a2abfe0b02c6828979e8a6f9b039908b42a
[05/11] ARM: dts: qcom: sdx65: Add SCM node
        commit: 261e09b4e3fb847b9a1e99538e31fdfdc2d1ee90
[06/11] ARM: dts: qcom: sdx65: Add Modem remoteproc node
        commit: a3ae01ed96e7efc2525125c36dc8e34186f0d7bc
[07/11] ARM: dts: qcom: sdx65-mtp: Enable modem
        commit: aae0f5314f95df66962acfcce23158e2a047b03c
[11/11] ARM: dts: qcom: sdx65: Add pshold support
        commit: df6d7b86f4885d370886a44339017e32c80556e7

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: (subset) [PATCH 04/11] dt-bindings: firmware: scm: Add compatible for SDX65

[Bjorn Andersson]

On Wed, 1 Jun 2022 16:15:05 +0530, Rohit Agarwal wrote:
> Add devicetree compatible for SCM present in SDX65 platform.
> 
> 

Applied, thanks!

[04/11] dt-bindings: firmware: scm: Add compatible for SDX65
        commit: 2ea6af6cc1f58f828180cf6124febbde47a10bad

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: (subset) [PATCH 10/11] ARM: dts: qcom: sdx65: Add Watchdog support

[Bjorn Andersson]

On Wed, 1 Jun 2022 16:15:11 +0530, Rohit Agarwal wrote:
> Enable Watchdog support for Application Processor Subsystem (APSS) block
> on SDX65 platform.
> 
> 

Applied, thanks!

[10/11] ARM: dts: qcom: sdx65: Add Watchdog support
        commit: 39eebfce4bdb88f53959d570ab9c8956bb9f0988

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>