[net-next: PATCH v2] net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports

[net-next: PATCH v2] net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports

[Marcin Wojtas]

Commit 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.

It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().

As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
and obtain the capabilities driectly.

Fixes: 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Changelog v1->v2
* Use an on-stack struct phylink_config pl_config.
* Use mv88e6xxx_get_caps() directly.

 drivers/net/dsa/mv88e6xxx/chip.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 37b649501500..07e9a4da924c 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3293,7 +3293,12 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
 	 * port and all DSA ports to their maximum bandwidth and full duplex.
 	 */
 	if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) {
-		unsigned long caps = dp->pl_config.mac_capabilities;
+		struct phylink_config pl_config = {};
+		unsigned long caps;
+
+		mv88e6xxx_get_caps(ds, port, &pl_config);
+
+		caps = pl_config.mac_capabilities;
 
 		if (chip->info->ops->port_max_speed_mode)
 			mode = chip->info->ops->port_max_speed_mode(port);
-- 
2.29.0

Re: [net-next: PATCH v2] net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports

[Vladimir Oltean]

On Wed, Jul 27, 2022 at 01:09:18AM +0200, Marcin Wojtas wrote:
> Commit 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
> stopped relying on SPEED_MAX constant and hardcoded speed settings
> for the switch ports and rely on phylink configuration.
> 
> It turned out, however, that when the relevant code is called,
> the mac_capabilites of CPU/DSA port remain unset.
> mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
> dsa_tree_setup_switches(), which precedes setting the caps in
> phylink_get_caps down in the chain of dsa_tree_setup_ports().
> 
> As a result the mac_capabilites are 0 and the default speed for CPU/DSA
> port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
> and obtain the capabilities driectly.
> 
> Fixes: 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

Re: [net-next: PATCH v2] net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (master)
by Jakub Kicinski <kuba@kernel.org>:

On Wed, 27 Jul 2022 01:09:18 +0200 you wrote:
> Commit 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
> stopped relying on SPEED_MAX constant and hardcoded speed settings
> for the switch ports and rely on phylink configuration.
> 
> It turned out, however, that when the relevant code is called,
> the mac_capabilites of CPU/DSA port remain unset.
> mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
> dsa_tree_setup_switches(), which precedes setting the caps in
> phylink_get_caps down in the chain of dsa_tree_setup_ports().
> 
> [...]

Here is the summary with links:
  - [net-next:,v2] net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports
    https://git.kernel.org/netdev/net-next/c/cc1049ccee20

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html