[PATCH v5 0/7] libsas and drivers: NCQ error handling

[PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

As reported in [0], the pm8001 driver NCQ error handling more or less
duplicates what libata does in link error handling, as follows:
- abort all commands
- do autopsy with read log ext 10 command
- reset the target to recover, if necessary

Indeed for the hisi_sas driver we want to add similar handling for NCQ
errors.

This series add a new libsas API - sas_ata_device_link_abort() - to handle
host NCQ errors, and fixes up pm8001 and hisi_sas drivers to use it.

A difference in the pm8001 driver NCQ error handling is that we send
SATA_ABORT per-task prior to read log ext10, but I feel that this should
not make a difference to the error handling.

Damien kindly tested previous the series for pm8001, but any further pm8001
testing would be appreciated as I have since tweaked pm8001 handling again.
This is because the pm8001 driver hangs on my arm64 machine read log ext10
command.

Finally with these changes we can make the libsas task alloc/free APIs
private, which they should always have been.

Based on mkp-scsi @ 6.1/scsi-staging 57569c37f0ad ("scsi: iscsi:
iscsi_tcp: Fix null-ptr-deref while calling getpeername()")

[0] https://lore.kernel.org/linux-scsi/8fb3b093-55f0-1fab-81f4-e8519810a978@huawei.com/

Changes since v4:
- Add Jason's tags (thanks)
- Rebase

Changes since v3:
- Add Damien's tags (thanks)
- Modify hisi_sas processing as follows:
  - use sas_task_abort() for rejected IO
  - Modify abort task processing to issue softreset in certain circumstances
- rebase

Changes since v2:
- Stop sending SATA_ABORT all for pm8001 handling
- Make "reset" optional in sas_ata_device_link_abort()
- Drop Jack's ACK

John Garry (5):
  scsi: libsas: Add sas_ata_device_link_abort()
  scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()
  scsi: pm8001: Modify task abort handling for SATA task
  scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors
  scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private

Xingui Yang (2):
  scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw
  scsi: hisi_sas: Modify v3 HW SATA disk error state completion
    processing

 drivers/scsi/hisi_sas/hisi_sas.h       |   1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  26 +++-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |  53 ++++++-
 drivers/scsi/libsas/sas_ata.c          |  12 ++
 drivers/scsi/libsas/sas_init.c         |   3 -
 drivers/scsi/libsas/sas_internal.h     |   4 +
 drivers/scsi/pm8001/pm8001_hwi.c       | 186 ++++---------------------
 drivers/scsi/pm8001/pm8001_sas.c       |   8 ++
 drivers/scsi/pm8001/pm8001_sas.h       |   4 -
 drivers/scsi/pm8001/pm80xx_hwi.c       | 177 +++--------------------
 include/scsi/libsas.h                  |   4 -
 include/scsi/sas_ata.h                 |   6 +
 12 files changed, 143 insertions(+), 341 deletions(-)

-- 
2.35.3

[PATCH v5 1/7] scsi: libsas: Add sas_ata_device_link_abort()

[John Garry]

Similar to how AHCI handles NCQ errors in ahci_error_intr() ->
ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs
to call to initiate a link abort.

This will mark all outstanding QCs as failed and kick-off EH.

Note:
A "force reset" argument is added for drivers which require the ATA error
handling to always reset the device.

A driver may require this feature for when SATA device per-SCSI cmnd
resources are only released during reset for ATA EH. As such, we need an
option to force reset to be done, regardless of what any EH autopsy
decides.

Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
---
 drivers/scsi/libsas/sas_ata.c | 12 ++++++++++++
 include/scsi/sas_ata.h        |  6 ++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index d35c9296f738..bdffb6852dcf 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -861,6 +861,18 @@ void sas_ata_wait_eh(struct domain_device *dev)
 	ata_port_wait_eh(ap);
 }
 
+void sas_ata_device_link_abort(struct domain_device *device, bool force_reset)
+{
+	struct ata_port *ap = device->sata_dev.ap;
+	struct ata_link *link = &ap->link;
+
+	link->eh_info.err_mask |= AC_ERR_DEV;
+	if (force_reset)
+		link->eh_info.action |= ATA_EH_RESET;
+	ata_link_abort(link);
+}
+EXPORT_SYMBOL_GPL(sas_ata_device_link_abort);
+
 int sas_execute_ata_cmd(struct domain_device *device, u8 *fis, int force_phy_id)
 {
 	struct sas_tmf_task tmf_task = {};
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
index a1df4f9d57a3..e47f0aec0722 100644
--- a/include/scsi/sas_ata.h
+++ b/include/scsi/sas_ata.h
@@ -32,6 +32,7 @@ void sas_probe_sata(struct asd_sas_port *port);
 void sas_suspend_sata(struct asd_sas_port *port);
 void sas_resume_sata(struct asd_sas_port *port);
 void sas_ata_end_eh(struct ata_port *ap);
+void sas_ata_device_link_abort(struct domain_device *dev, bool force_reset);
 int sas_execute_ata_cmd(struct domain_device *device, u8 *fis,
 			int force_phy_id);
 int sas_ata_wait_after_reset(struct domain_device *dev, unsigned long deadline);
@@ -87,6 +88,11 @@ static inline void sas_ata_end_eh(struct ata_port *ap)
 {
 }
 
+static inline void sas_ata_device_link_abort(struct domain_device *dev,
+					     bool force_reset)
+{
+}
+
 static inline int sas_execute_ata_cmd(struct domain_device *device, u8 *fis,
 				      int force_phy_id)
 {
-- 
2.35.3

[PATCH v5 2/7] scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()

[John Garry]

Each branch currently defines a slot variable independently, and it is
neater to move it to the function head.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 699b07abb6b0..8303aa5eaf25 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1547,6 +1547,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
 	struct hisi_sas_internal_abort_data internal_abort_data = { false };
 	struct domain_device *device = task->dev;
 	struct hisi_sas_device *sas_dev = device->lldd_dev;
+	struct hisi_sas_slot *slot = task->lldd_task;
 	struct hisi_hba *hisi_hba;
 	struct device *dev;
 	int rc = TMF_RESP_FUNC_FAILED;
@@ -1560,7 +1561,6 @@ static int hisi_sas_abort_task(struct sas_task *task)
 
 	spin_lock_irqsave(&task->task_state_lock, flags);
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
-		struct hisi_sas_slot *slot = task->lldd_task;
 		struct hisi_sas_cq *cq;
 
 		if (slot) {
@@ -1578,8 +1578,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
 	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
 
-	if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
-		struct hisi_sas_slot *slot = task->lldd_task;
+	if (slot && task->task_proto & SAS_PROTOCOL_SSP) {
 		u16 tag = slot->idx;
 		int rc2;
 
@@ -1613,9 +1612,8 @@ static int hisi_sas_abort_task(struct sas_task *task)
 			hisi_sas_dereg_device(hisi_hba, device);
 			rc = hisi_sas_softreset_ata_disk(device);
 		}
-	} else if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SMP) {
+	} else if (slot && task->task_proto & SAS_PROTOCOL_SMP) {
 		/* SMP */
-		struct hisi_sas_slot *slot = task->lldd_task;
 		u32 tag = slot->idx;
 		struct hisi_sas_cq *cq = &hisi_hba->cq[slot->dlvry_queue];
 
-- 
2.35.3

[PATCH v5 3/7] scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw

[John Garry]

From: Xingui Yang <yangxingui@huawei.com>

When CQ header dw3 SATA_DISK_ERR is set it means this SATA disk is in error
state and the current IPTT is invalid. An invalid IPTT does not correspond
to any slot.

In this scenario, new I/Os that delivered to disk will be rejected by the
controller and all I/Os remaining in the disk should be aborted, which we
add here with the sas_ata_device_link_abort() call.

In hisi_sas_abort_task() we don't want to issue a softreset as it may
cause info to be lost in the target disk for the ATA EH autopsy. In this
case, just release resources - the disk won't return other I/Os normally
after NCQ Error, so this is safe.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 18 +++++++++-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 48 ++++++++++++++++++++++++--
 3 files changed, 64 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 9aebf4a26b13..6f8a52a1b808 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -104,6 +104,7 @@ enum {
 enum dev_status {
 	HISI_SAS_DEV_INIT,
 	HISI_SAS_DEV_NORMAL,
+	HISI_SAS_DEV_NCQ_ERR,
 };
 
 enum {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 8303aa5eaf25..4c37ae9eb6b6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1604,13 +1604,26 @@ static int hisi_sas_abort_task(struct sas_task *task)
 	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
 		task->task_proto & SAS_PROTOCOL_STP) {
 		if (task->dev->dev_type == SAS_SATA_DEV) {
+			struct ata_queued_cmd *qc = task->uldd_task;
+
 			rc = hisi_sas_internal_task_abort_dev(sas_dev, false);
 			if (rc < 0) {
 				dev_err(dev, "abort task: internal abort failed\n");
 				goto out;
 			}
 			hisi_sas_dereg_device(hisi_hba, device);
-			rc = hisi_sas_softreset_ata_disk(device);
+
+			/*
+			 * If an ATA internal command times out in ATA EH, it
+			 * need to execute soft reset, so check the scsicmd
+			 */
+			if ((sas_dev->dev_status == HISI_SAS_DEV_NCQ_ERR) &&
+			    qc && qc->scsicmd) {
+				hisi_sas_do_release_task(hisi_hba, task, slot);
+				rc = TMF_RESP_FUNC_COMPLETE;
+			} else {
+				rc = hisi_sas_softreset_ata_disk(device);
+			}
 		}
 	} else if (slot && task->task_proto & SAS_PROTOCOL_SMP) {
 		/* SMP */
@@ -1727,6 +1740,9 @@ static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
 	struct device *dev = hisi_hba->dev;
 	int rc;
 
+	if (sas_dev->dev_status == HISI_SAS_DEV_NCQ_ERR)
+		sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+
 	rc = hisi_sas_internal_task_abort_dev(sas_dev, false);
 	if (rc < 0) {
 		dev_err(dev, "I_T nexus reset: internal abort (%d)\n", rc);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 10b55cef5cf5..4278d3482ebb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -404,6 +404,11 @@
 #define CMPLT_HDR_CMPLT_MSK		(0x3 << CMPLT_HDR_CMPLT_OFF)
 #define CMPLT_HDR_ERROR_PHASE_OFF   2
 #define CMPLT_HDR_ERROR_PHASE_MSK   (0xff << CMPLT_HDR_ERROR_PHASE_OFF)
+/* bit[9:2] Error Phase */
+#define ERR_PHASE_RESPONSE_FRAME_REV_STAGE_OFF	\
+					8
+#define ERR_PHASE_RESPONSE_FRAME_REV_STAGE_MSK	\
+	(0x1 << ERR_PHASE_RESPONSE_FRAME_REV_STAGE_OFF)
 #define CMPLT_HDR_RSPNS_XFRD_OFF	10
 #define CMPLT_HDR_RSPNS_XFRD_MSK	(0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
 #define CMPLT_HDR_RSPNS_GOOD_OFF	11
@@ -423,8 +428,15 @@
 #define CMPLT_HDR_DEV_ID_OFF		16
 #define CMPLT_HDR_DEV_ID_MSK		(0xffff << CMPLT_HDR_DEV_ID_OFF)
 /* dw3 */
+#define CMPLT_HDR_SATA_DISK_ERR_OFF	16
+#define CMPLT_HDR_SATA_DISK_ERR_MSK	(0x1 << CMPLT_HDR_SATA_DISK_ERR_OFF)
 #define CMPLT_HDR_IO_IN_TARGET_OFF	17
 #define CMPLT_HDR_IO_IN_TARGET_MSK	(0x1 << CMPLT_HDR_IO_IN_TARGET_OFF)
+/* bit[23:18] ERR_FIS_ATA_STATUS */
+#define FIS_ATA_STATUS_ERR_OFF		18
+#define FIS_ATA_STATUS_ERR_MSK		(0x1 << FIS_ATA_STATUS_ERR_OFF)
+#define FIS_TYPE_SDB_OFF		31
+#define FIS_TYPE_SDB_MSK		(0x1 << FIS_TYPE_SDB_OFF)
 
 /* ITCT header */
 /* qw0 */
@@ -2148,6 +2160,18 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
 	return IRQ_HANDLED;
 }
 
+static bool is_ncq_err_v3_hw(struct hisi_sas_complete_v3_hdr *complete_hdr)
+{
+	u32 dw0, dw3;
+
+	dw0 = le32_to_cpu(complete_hdr->dw0);
+	dw3 = le32_to_cpu(complete_hdr->dw3);
+
+	return (dw0 & ERR_PHASE_RESPONSE_FRAME_REV_STAGE_MSK) &&
+	       (dw3 & FIS_TYPE_SDB_MSK) &&
+	       (dw3 & FIS_ATA_STATUS_ERR_MSK);
+}
+
 static bool
 slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 	       struct hisi_sas_slot *slot)
@@ -2381,14 +2405,34 @@ static irqreturn_t  cq_thread_v3_hw(int irq_no, void *p)
 	while (rd_point != wr_point) {
 		struct hisi_sas_complete_v3_hdr *complete_hdr;
 		struct device *dev = hisi_hba->dev;
-		u32 dw1;
+		u32 dw0, dw1, dw3;
 		int iptt;
 
 		complete_hdr = &complete_queue[rd_point];
+		dw0 = le32_to_cpu(complete_hdr->dw0);
 		dw1 = le32_to_cpu(complete_hdr->dw1);
+		dw3 = le32_to_cpu(complete_hdr->dw3);
 
 		iptt = dw1 & CMPLT_HDR_IPTT_MSK;
-		if (likely(iptt < HISI_SAS_COMMAND_ENTRIES_V3_HW)) {
+		if (unlikely((dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) &&
+			     (dw3 & CMPLT_HDR_SATA_DISK_ERR_MSK)) {
+			int device_id = (dw1 & CMPLT_HDR_DEV_ID_MSK) >>
+					CMPLT_HDR_DEV_ID_OFF;
+			struct hisi_sas_itct *itct =
+				&hisi_hba->itct[device_id];
+			struct hisi_sas_device *sas_dev =
+				&hisi_hba->devices[device_id];
+			struct domain_device *device = sas_dev->sas_device;
+
+			dev_err(dev, "erroneous completion disk err dev id=%d sas_addr=0x%llx CQ hdr: 0x%x 0x%x 0x%x 0x%x\n",
+				device_id, itct->sas_addr, dw0, dw1,
+				complete_hdr->act, dw3);
+
+			if (is_ncq_err_v3_hw(complete_hdr))
+				sas_dev->dev_status = HISI_SAS_DEV_NCQ_ERR;
+
+			sas_ata_device_link_abort(device, true);
+		} else if (likely(iptt < HISI_SAS_COMMAND_ENTRIES_V3_HW)) {
 			slot = &hisi_hba->slot_info[iptt];
 			slot->cmplt_queue_slot = rd_point;
 			slot->cmplt_queue = queue;
-- 
2.35.3

[PATCH v5 4/7] scsi: hisi_sas: Modify v3 HW SATA disk error state completion processing

[John Garry]

From: Xingui Yang <yangxingui@huawei.com>

When an NCQ error occurs, the  controller will abnormally complete the I/Os
that are newly delivered to disk, and bit8 in CQ dw3 will be set which
indicates that the SATA disk is in error state. The current processing flow
is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will
set FIS stat to ATA_ERR. After analyzing the IO by ata_eh_analyze_tf(),
err_mask will set to AC_ERR_HSM. If media error occurs for four times
within 10 minutes and the chip rejects new I/Os for four times, NCQ will
be disabled due to excessive errors, which is undesirable.

Therefore, use sas_task_abort() to handle abnormally completed I/Os when
SATA disk is in error state, as these abnormally completed I/Os are already
processed by sas_ata_device_link_abort() and qc->flag are set to
ATA_QCFLAG_FAILED. If sas_task_abort() is used, qc->err_mask will not be
modified in EH. Unlike the current process flow, it will not increase
the count of ECAT_TOUT_HSM and not turn off NCQ. Like other I/Os on the
disk that do not have an error but do not return after the NCQ error, they
are retried after the EH.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 4278d3482ebb..9d0a54043883 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -428,6 +428,8 @@
 #define CMPLT_HDR_DEV_ID_OFF		16
 #define CMPLT_HDR_DEV_ID_MSK		(0xffff << CMPLT_HDR_DEV_ID_OFF)
 /* dw3 */
+#define SATA_DISK_IN_ERROR_STATUS_OFF	8
+#define SATA_DISK_IN_ERROR_STATUS_MSK	(0x1 << SATA_DISK_IN_ERROR_STATUS_OFF)
 #define CMPLT_HDR_SATA_DISK_ERR_OFF	16
 #define CMPLT_HDR_SATA_DISK_ERR_MSK	(0x1 << CMPLT_HDR_SATA_DISK_ERR_OFF)
 #define CMPLT_HDR_IO_IN_TARGET_OFF	17
@@ -2219,7 +2221,8 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 		} else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
 			ts->residual = trans_tx_fail_type;
 			ts->stat = SAS_DATA_UNDERRUN;
-		} else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
+		} else if ((dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) ||
+			   (dw3 & SATA_DISK_IN_ERROR_STATUS_MSK)) {
 			ts->stat = SAS_PHY_DOWN;
 			slot->abort = 1;
 		} else {
-- 
2.35.3

[PATCH v5 5/7] scsi: pm8001: Modify task abort handling for SATA task

[John Garry]

When we try to abort a SATA task, the CCB of the task which we are trying
to avoid may still complete. In this case, we should not touch the task
associated with that CCB as we can race with libsas freeing the last later
in sas_eh_handle_sas_errors() -> sas_eh_finish_cmd() for when
TASK_IS_ABORTED is returned from sas_scsi_find_task()

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 15 +++++++++++++--
 drivers/scsi/pm8001/pm8001_sas.c |  8 ++++++++
 drivers/scsi/pm8001/pm80xx_hwi.c | 14 ++++++++++----
 3 files changed, 31 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 628b08ba6770..c0adc3a9d196 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2295,7 +2295,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		if (t->dev && (t->dev->lldd_dev))
 			pm8001_dev = t->dev->lldd_dev;
 	} else {
-		pm8001_dbg(pm8001_ha, FAIL, "task null\n");
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
 	}
 
@@ -2675,8 +2677,17 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	pm8001_dev = ccb->device;
 	if (event)
 		pm8001_dbg(pm8001_ha, FAIL, "sata IO status 0x%x\n", event);
-	if (unlikely(!t || !t->lldd_task || !t->dev))
+
+	if (unlikely(!t)) {
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
+	}
+
+	if (unlikely(!t->lldd_task || !t->dev))
+		return;
+
 	ts = &t->task_status;
 	pm8001_dbg(pm8001_ha, DEVIO,
 		   "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 8e3f2f9ddaac..d5ec29f69be3 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -983,6 +983,7 @@ int pm8001_query_task(struct sas_task *task)
 /*  mandatory SAM-3, still need free task/ccb info, abort the specified task */
 int pm8001_abort_task(struct sas_task *task)
 {
+	struct pm8001_ccb_info *ccb = task->lldd_task;
 	unsigned long flags;
 	u32 tag;
 	struct domain_device *dev ;
@@ -1113,6 +1114,13 @@ int pm8001_abort_task(struct sas_task *task)
 				pm8001_dev, DS_OPERATIONAL);
 			wait_for_completion(&completion);
 		} else {
+			/*
+			 * Ensure that if we see a completion for the ccb
+			 * associated with the task which we are trying to
+			 * abort then we should not touch the sas_task as it
+			 * may race with libsas freeing it when return here.
+			 */
+			ccb->task = NULL;
 			ret = sas_execute_internal_abort_single(dev, tag, 0, NULL);
 		}
 		rc = TMF_RESP_FUNC_COMPLETE;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index f8b8624458f7..dd0e06983cd3 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2396,7 +2396,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 		if (t->dev && (t->dev->lldd_dev))
 			pm8001_dev = t->dev->lldd_dev;
 	} else {
-		pm8001_dbg(pm8001_ha, FAIL, "task null\n");
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
 	}
 
@@ -2813,12 +2815,16 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
 	ccb = &pm8001_ha->ccb_info[tag];
 	t = ccb->task;
 	pm8001_dev = ccb->device;
-
-	if (unlikely(!t || !t->lldd_task || !t->dev)) {
-		pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
+	if (unlikely(!t)) {
+		pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+			   ccb->ccb_tag);
+		pm8001_ccb_free(pm8001_ha, ccb);
 		return;
 	}
 
+	if (unlikely(!t->lldd_task || !t->dev))
+		return;
+
 	ts = &t->task_status;
 	pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
 		   port_id, tag, event);
-- 
2.35.3

[PATCH v5 6/7] scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors

[John Garry]

In commit c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") the
driver had support added to handle NCQ errors but much of what is done
in this handling is duplicated from the libata EH.

In that named commit we handle in 2x main steps:
a. Issue read log ext10 to examine and clear the errors
b. Issue SATA_ABORT all command

Indeed, in libata EH, we do similar to above:
a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() ->
   ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h()
b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset
   or hard reset

Since there is so much duplication, use sas_ata_device_link_abort() which
will abort all pending IOs and kick of ATA EH which will do the steps,
above.

However we will not follow the advisory to send the SATA_ABORT all command
after the autopsy in read log ext10. Indeed, in libsas EH, we already send
a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in
and issuing the read log ext10 in the recovery process. I judge that this
is ok as the SATA_ABORT command does not actually send any protocol on the
link to abort IO on the other side, so would not change any state on the
disk (for the read log ext10 command).

Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 171 +++----------------------------
 drivers/scsi/pm8001/pm8001_sas.h |   4 -
 drivers/scsi/pm8001/pm80xx_hwi.c | 163 ++---------------------------
 3 files changed, 19 insertions(+), 319 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index c0adc3a9d196..ec1a9ab61814 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1724,7 +1724,14 @@ void pm8001_work_fn(struct work_struct *work)
 				pm8001_free_dev(pm8001_dev);
 			}
 		}
-	}	break;
+	}
+	break;
+	case IO_XFER_ERROR_ABORTED_NCQ_MODE:
+	{
+		dev = pm8001_dev->sas_device;
+		sas_ata_device_link_abort(dev, false);
+	}
+	break;
 	}
 	kfree(pw);
 }
@@ -1748,110 +1755,6 @@ int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
 	return ret;
 }
 
-static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
-		struct pm8001_device *pm8001_ha_dev)
-{
-	struct pm8001_ccb_info *ccb;
-	struct sas_task *task;
-	struct task_abort_req task_abort;
-	u32 opc = OPC_INB_SATA_ABORT;
-	int ret;
-
-	pm8001_ha_dev->id |= NCQ_ABORT_ALL_FLAG;
-	pm8001_ha_dev->id &= ~NCQ_READ_LOG_FLAG;
-
-	task = sas_alloc_slow_task(GFP_ATOMIC);
-	if (!task) {
-		pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
-		return;
-	}
-
-	task->task_done = pm8001_task_done;
-
-	ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-	if (!ccb) {
-		sas_free_task(task);
-		return;
-	}
-
-	memset(&task_abort, 0, sizeof(task_abort));
-	task_abort.abort_all = cpu_to_le32(1);
-	task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	task_abort.tag = cpu_to_le32(ccb->ccb_tag);
-
-	ret = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &task_abort,
-				   sizeof(task_abort), 0);
-	if (ret) {
-		sas_free_task(task);
-		pm8001_ccb_free(pm8001_ha, ccb);
-	}
-}
-
-static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
-		struct pm8001_device *pm8001_ha_dev)
-{
-	struct sata_start_req sata_cmd;
-	int res;
-	struct pm8001_ccb_info *ccb;
-	struct sas_task *task = NULL;
-	struct host_to_dev_fis fis;
-	struct domain_device *dev;
-	u32 opc = OPC_INB_SATA_HOST_OPSTART;
-
-	task = sas_alloc_slow_task(GFP_ATOMIC);
-	if (!task) {
-		pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
-		return;
-	}
-	task->task_done = pm8001_task_done;
-
-	/*
-	 * Allocate domain device by ourselves as libsas is not going to
-	 * provide any.
-	 */
-	dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
-	if (!dev) {
-		sas_free_task(task);
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "Domain device cannot be allocated\n");
-		return;
-	}
-	task->dev = dev;
-	task->dev->lldd_dev = pm8001_ha_dev;
-
-	ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-	if (!ccb) {
-		sas_free_task(task);
-		kfree(dev);
-		return;
-	}
-
-	pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
-	pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
-
-	/* construct read log FIS */
-	memset(&fis, 0, sizeof(struct host_to_dev_fis));
-	fis.fis_type = 0x27;
-	fis.flags = 0x80;
-	fis.command = ATA_CMD_READ_LOG_EXT;
-	fis.lbal = 0x10;
-	fis.sector_count = 0x1;
-
-	memset(&sata_cmd, 0, sizeof(sata_cmd));
-	sata_cmd.tag = cpu_to_le32(ccb->ccb_tag);
-	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	sata_cmd.ncqtag_atap_dir_m = cpu_to_le32((0x1 << 7) | (0x5 << 9));
-	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
-
-	res = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
-				   sizeof(sata_cmd), 0);
-	if (res) {
-		sas_free_task(task);
-		pm8001_ccb_free(pm8001_ha, ccb);
-		kfree(dev);
-	}
-}
-
 /**
  * mpi_ssp_completion- process the event that FW response to the SSP request.
  * @pm8001_ha: our hba card information
@@ -2301,8 +2204,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		return;
 	}
 
-	if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
-		&& unlikely(!t || !t->lldd_task || !t->dev)) {
+	if (pm8001_dev && unlikely(!t || !t->lldd_task || !t->dev)) {
 		pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
 		return;
 	}
@@ -2360,15 +2262,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		if (param == 0) {
 			ts->resp = SAS_TASK_COMPLETE;
 			ts->stat = SAS_SAM_STAT_GOOD;
-			/* check if response is for SEND READ LOG */
-			if (pm8001_dev &&
-			    (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
-				pm8001_send_abort_all(pm8001_ha, pm8001_dev);
-				/* Free the tag */
-				pm8001_tag_free(pm8001_ha, tag);
-				sas_free_task(t);
-				return;
-			}
 		} else {
 			u8 len;
 			ts->resp = SAS_TASK_COMPLETE;
@@ -2666,9 +2559,10 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
 		/* find device using device id */
 		pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
-		/* send read log extension */
 		if (pm8001_dev)
-			pm8001_send_read_log(pm8001_ha, pm8001_dev);
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_XFER_ERROR_ABORTED_NCQ_MODE);
 		return;
 	}
 
@@ -3649,12 +3543,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	pm8001_ccb_task_free(pm8001_ha, ccb);
 	mb();
 
-	if (pm8001_dev->id & NCQ_ABORT_ALL_FLAG) {
-		sas_free_task(t);
-		pm8001_dev->id &= ~NCQ_ABORT_ALL_FLAG;
-	} else {
-		t->task_done(t);
-	}
+	t->task_done(t);
 
 	return 0;
 }
@@ -4206,7 +4095,6 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	u64 phys_addr;
 	u32 ATAP = 0x0;
 	u32 dir;
-	unsigned long flags;
 	u32  opc = OPC_INB_SATA_HOST_OPSTART;
 
 	memset(&sata_cmd, 0, sizeof(sata_cmd));
@@ -4261,39 +4149,6 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 		sata_cmd.esgl = 0;
 	}
 
-	/* Check for read log for failed drive and return */
-	if (sata_cmd.sata_fis.command == 0x2f) {
-		if (((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
-			(pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
-			(pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
-			struct task_status_struct *ts;
-
-			pm8001_ha_dev->id &= 0xDFFFFFFF;
-			ts = &task->task_status;
-
-			spin_lock_irqsave(&task->task_state_lock, flags);
-			ts->resp = SAS_TASK_COMPLETE;
-			ts->stat = SAS_SAM_STAT_GOOD;
-			task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-			task->task_state_flags |= SAS_TASK_STATE_DONE;
-			if (unlikely((task->task_state_flags &
-					SAS_TASK_STATE_ABORTED))) {
-				spin_unlock_irqrestore(&task->task_state_lock,
-							flags);
-				pm8001_dbg(pm8001_ha, FAIL,
-					   "task 0x%p resp 0x%x  stat 0x%x but aborted by upper layer\n",
-					   task, ts->resp,
-					   ts->stat);
-				pm8001_ccb_task_free(pm8001_ha, ccb);
-			} else {
-				spin_unlock_irqrestore(&task->task_state_lock,
-							flags);
-				pm8001_ccb_task_free_done(pm8001_ha, ccb);
-				return 0;
-			}
-		}
-	}
-
 	return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
 				    sizeof(sata_cmd), 0);
 }
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index b08f52673889..8ab0654327f9 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -579,10 +579,6 @@ struct pm8001_fw_image_header {
 #define FLASH_UPDATE_DNLD_NOT_SUPPORTED		0x10
 #define FLASH_UPDATE_DISABLED			0x11
 
-#define	NCQ_READ_LOG_FLAG			0x80000000
-#define	NCQ_ABORT_ALL_FLAG			0x40000000
-#define	NCQ_2ND_RLE_FLAG			0x20000000
-
 /* Device states */
 #define DS_OPERATIONAL				0x01
 #define DS_PORT_IN_RESET			0x02
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index dd0e06983cd3..4484c498bcb6 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1778,113 +1778,6 @@ pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 	pm80xx_chip_intx_interrupt_disable(pm8001_ha);
 }
 
-static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
-		struct pm8001_device *pm8001_ha_dev)
-{
-	struct pm8001_ccb_info *ccb;
-	struct sas_task *task;
-	struct task_abort_req task_abort;
-	u32 opc = OPC_INB_SATA_ABORT;
-	int ret;
-
-	pm8001_ha_dev->id |= NCQ_ABORT_ALL_FLAG;
-	pm8001_ha_dev->id &= ~NCQ_READ_LOG_FLAG;
-
-	task = sas_alloc_slow_task(GFP_ATOMIC);
-	if (!task) {
-		pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
-		return;
-	}
-	task->task_done = pm8001_task_done;
-
-	ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-	if (!ccb) {
-		sas_free_task(task);
-		return;
-	}
-
-	memset(&task_abort, 0, sizeof(task_abort));
-	task_abort.abort_all = cpu_to_le32(1);
-	task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	task_abort.tag = cpu_to_le32(ccb->ccb_tag);
-
-	ret = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &task_abort,
-				   sizeof(task_abort), 0);
-	pm8001_dbg(pm8001_ha, FAIL, "Executing abort task end\n");
-	if (ret) {
-		sas_free_task(task);
-		pm8001_ccb_free(pm8001_ha, ccb);
-	}
-}
-
-static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
-		struct pm8001_device *pm8001_ha_dev)
-{
-	struct sata_start_req sata_cmd;
-	int res;
-	struct pm8001_ccb_info *ccb;
-	struct sas_task *task = NULL;
-	struct host_to_dev_fis fis;
-	struct domain_device *dev;
-	u32 opc = OPC_INB_SATA_HOST_OPSTART;
-
-	task = sas_alloc_slow_task(GFP_ATOMIC);
-	if (!task) {
-		pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
-		return;
-	}
-	task->task_done = pm8001_task_done;
-
-	/*
-	 * Allocate domain device by ourselves as libsas is not going to
-	 * provide any.
-	 */
-	dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
-	if (!dev) {
-		sas_free_task(task);
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "Domain device cannot be allocated\n");
-		return;
-	}
-
-	task->dev = dev;
-	task->dev->lldd_dev = pm8001_ha_dev;
-
-	ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
-	if (!ccb) {
-		sas_free_task(task);
-		kfree(dev);
-		return;
-	}
-
-	pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
-	pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
-
-	memset(&sata_cmd, 0, sizeof(sata_cmd));
-
-	/* construct read log FIS */
-	memset(&fis, 0, sizeof(struct host_to_dev_fis));
-	fis.fis_type = 0x27;
-	fis.flags = 0x80;
-	fis.command = ATA_CMD_READ_LOG_EXT;
-	fis.lbal = 0x10;
-	fis.sector_count = 0x1;
-
-	sata_cmd.tag = cpu_to_le32(ccb->ccb_tag);
-	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	sata_cmd.ncqtag_atap_dir_m_dad = cpu_to_le32(((0x1 << 7) | (0x5 << 9)));
-	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
-
-	res = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
-				   sizeof(sata_cmd), 0);
-	pm8001_dbg(pm8001_ha, FAIL, "Executing read log end\n");
-	if (res) {
-		sas_free_task(task);
-		pm8001_ccb_free(pm8001_ha, ccb);
-		kfree(dev);
-	}
-}
-
 /**
  * mpi_ssp_completion - process the event that FW response to the SSP request.
  * @pm8001_ha: our hba card information
@@ -2402,11 +2295,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 		return;
 	}
 
-	if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
-		&& unlikely(!t || !t->lldd_task || !t->dev)) {
-		pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
+
+	if (pm8001_dev && unlikely(!t->lldd_task || !t->dev))
 		return;
-	}
 
 	ts = &t->task_status;
 
@@ -2463,15 +2354,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 		if (param == 0) {
 			ts->resp = SAS_TASK_COMPLETE;
 			ts->stat = SAS_SAM_STAT_GOOD;
-			/* check if response is for SEND READ LOG */
-			if (pm8001_dev &&
-			    (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
-				pm80xx_send_abort_all(pm8001_ha, pm8001_dev);
-				/* Free the tag */
-				pm8001_tag_free(pm8001_ha, tag);
-				sas_free_task(t);
-				return;
-			}
 		} else {
 			u8 len;
 			ts->resp = SAS_TASK_COMPLETE;
@@ -2806,9 +2688,11 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
 	if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
 		/* find device using device id */
 		pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
-		/* send read log extension */
+		/* send read log extension by aborting the link - libata does what we want */
 		if (pm8001_dev)
-			pm80xx_send_read_log(pm8001_ha, pm8001_dev);
+			pm8001_handle_event(pm8001_ha,
+				pm8001_dev,
+				IO_XFER_ERROR_ABORTED_NCQ_MODE);
 		return;
 	}
 
@@ -4556,7 +4440,6 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	u32 end_addr_high, end_addr_low;
 	u32 ATAP = 0x0;
 	u32 dir;
-	unsigned long flags;
 	u32 opc = OPC_INB_SATA_HOST_OPSTART;
 	memset(&sata_cmd, 0, sizeof(sata_cmd));
 
@@ -4735,40 +4618,6 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 				     (task->ata_task.atapi_packet[15] << 24)));
 	}
 
-	/* Check for read log for failed drive and return */
-	if (sata_cmd.sata_fis.command == 0x2f) {
-		if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
-			(pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
-			(pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
-			struct task_status_struct *ts;
-
-			pm8001_ha_dev->id &= 0xDFFFFFFF;
-			ts = &task->task_status;
-
-			spin_lock_irqsave(&task->task_state_lock, flags);
-			ts->resp = SAS_TASK_COMPLETE;
-			ts->stat = SAS_SAM_STAT_GOOD;
-			task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-			task->task_state_flags |= SAS_TASK_STATE_DONE;
-			if (unlikely((task->task_state_flags &
-					SAS_TASK_STATE_ABORTED))) {
-				spin_unlock_irqrestore(&task->task_state_lock,
-							flags);
-				pm8001_dbg(pm8001_ha, FAIL,
-					   "task 0x%p resp 0x%x  stat 0x%x but aborted by upper layer\n",
-					   task, ts->resp,
-					   ts->stat);
-				pm8001_ccb_task_free(pm8001_ha, ccb);
-				return 0;
-			} else {
-				spin_unlock_irqrestore(&task->task_state_lock,
-							flags);
-				pm8001_ccb_task_free_done(pm8001_ha, ccb);
-				atomic_dec(&pm8001_ha_dev->running_req);
-				return 0;
-			}
-		}
-	}
 	trace_pm80xx_request_issue(pm8001_ha->id,
 				ccb->device ? ccb->device->attached_phy : PM8001_MAX_PHYS,
 				ccb->ccb_tag, opc,
-- 
2.35.3

[PATCH v5 7/7] scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private

[John Garry]

We have no users outside libsas any longer, so make sas_alloc_task(),
sas_alloc_slow_task(), and sas_free_task() private.

Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
---
 drivers/scsi/libsas/sas_init.c     | 3 ---
 drivers/scsi/libsas/sas_internal.h | 4 ++++
 include/scsi/libsas.h              | 4 ----
 3 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index e4f77072a58d..f2c05ebeb72f 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -35,7 +35,6 @@ struct sas_task *sas_alloc_task(gfp_t flags)
 
 	return task;
 }
-EXPORT_SYMBOL_GPL(sas_alloc_task);
 
 struct sas_task *sas_alloc_slow_task(gfp_t flags)
 {
@@ -56,7 +55,6 @@ struct sas_task *sas_alloc_slow_task(gfp_t flags)
 
 	return task;
 }
-EXPORT_SYMBOL_GPL(sas_alloc_slow_task);
 
 void sas_free_task(struct sas_task *task)
 {
@@ -65,7 +63,6 @@ void sas_free_task(struct sas_task *task)
 		kmem_cache_free(sas_task_cache, task);
 	}
 }
-EXPORT_SYMBOL_GPL(sas_free_task);
 
 /*------------ SAS addr hash -----------*/
 void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 8d0ad3abc7b5..b54bcf3c9a9d 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -52,6 +52,10 @@ void sas_unregister_phys(struct sas_ha_struct *sas_ha);
 struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy, gfp_t gfp_flags);
 void sas_free_event(struct asd_sas_event *event);
 
+struct sas_task *sas_alloc_task(gfp_t flags);
+struct sas_task *sas_alloc_slow_task(gfp_t flags);
+void sas_free_task(struct sas_task *task);
+
 int  sas_register_ports(struct sas_ha_struct *sas_ha);
 void sas_unregister_ports(struct sas_ha_struct *sas_ha);
 
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 2dbead74a2af..f86b56bf7833 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -639,10 +639,6 @@ struct sas_task_slow {
 #define SAS_TASK_STATE_ABORTED      4
 #define SAS_TASK_NEED_DEV_RESET     8
 
-extern struct sas_task *sas_alloc_task(gfp_t flags);
-extern struct sas_task *sas_alloc_slow_task(gfp_t flags);
-extern void sas_free_task(struct sas_task *task);
-
 static inline bool sas_is_internal_abort(struct sas_task *task)
 {
 	return task->task_proto == SAS_PROTOCOL_INTERNAL_ABORT;
-- 
2.35.3

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Niklas Cassel]

On Tue, Sep 27, 2022 at 03:04:51PM +0800, John Garry wrote:
> As reported in [0], the pm8001 driver NCQ error handling more or less
> duplicates what libata does in link error handling, as follows:
> - abort all commands
> - do autopsy with read log ext 10 command
> - reset the target to recover, if necessary
> 
> Indeed for the hisi_sas driver we want to add similar handling for NCQ
> errors.
> 
> This series add a new libsas API - sas_ata_device_link_abort() - to handle
> host NCQ errors, and fixes up pm8001 and hisi_sas drivers to use it.
> 
> A difference in the pm8001 driver NCQ error handling is that we send
> SATA_ABORT per-task prior to read log ext10, but I feel that this should
> not make a difference to the error handling.
> 
> Damien kindly tested previous the series for pm8001, but any further pm8001
> testing would be appreciated as I have since tweaked pm8001 handling again.
> This is because the pm8001 driver hangs on my arm64 machine read log ext10
> command.
> 
> Finally with these changes we can make the libsas task alloc/free APIs
> private, which they should always have been.
> 
> Based on mkp-scsi @ 6.1/scsi-staging 57569c37f0ad ("scsi: iscsi:
> iscsi_tcp: Fix null-ptr-deref while calling getpeername()")
> 
> [0] https://lore.kernel.org/linux-scsi/8fb3b093-55f0-1fab-81f4-e8519810a978@huawei.com/
> 
> Changes since v4:
> - Add Jason's tags (thanks)
> - Rebase
> 
> Changes since v3:
> - Add Damien's tags (thanks)
> - Modify hisi_sas processing as follows:
>   - use sas_task_abort() for rejected IO
>   - Modify abort task processing to issue softreset in certain circumstances
> - rebase
> 
> Changes since v2:
> - Stop sending SATA_ABORT all for pm8001 handling
> - Make "reset" optional in sas_ata_device_link_abort()
> - Drop Jack's ACK
> 
> John Garry (5):
>   scsi: libsas: Add sas_ata_device_link_abort()
>   scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()
>   scsi: pm8001: Modify task abort handling for SATA task
>   scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors
>   scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private
> 
> Xingui Yang (2):
>   scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw
>   scsi: hisi_sas: Modify v3 HW SATA disk error state completion
>     processing
> 
>  drivers/scsi/hisi_sas/hisi_sas.h       |   1 +
>  drivers/scsi/hisi_sas/hisi_sas_main.c  |  26 +++-
>  drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |  53 ++++++-
>  drivers/scsi/libsas/sas_ata.c          |  12 ++
>  drivers/scsi/libsas/sas_init.c         |   3 -
>  drivers/scsi/libsas/sas_internal.h     |   4 +
>  drivers/scsi/pm8001/pm8001_hwi.c       | 186 ++++---------------------
>  drivers/scsi/pm8001/pm8001_sas.c       |   8 ++
>  drivers/scsi/pm8001/pm8001_sas.h       |   4 -
>  drivers/scsi/pm8001/pm80xx_hwi.c       | 177 +++--------------------
>  include/scsi/libsas.h                  |   4 -
>  include/scsi/sas_ata.h                 |   6 +
>  12 files changed, 143 insertions(+), 341 deletions(-)
> 
> -- 
> 2.35.3
> 

For pm80xx (pm8001 changes untested):
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>



Notes unrelated to this patch:

Both before and after this series, this driver prints:
[  215.845053] ata21.00: exception Emask 0x0 SAct 0xfc0000 SErr 0x0 action 0x6
[  215.852308] ata21.00: failed command: WRITE FPDMA QUEUED
[  215.857801] ata21.00: cmd 61/00:00:00:3a:d3/01:00:b3:04:00/40 tag 18 ncq dma 131072 out
                        res 43/04:00:ff:3a:d3/00:00:b3:04:00/40 Emask 0x400 (NCQ error) <F>
[  215.874396] ata21.00: status: { DRDY SENSE ERR }
[  215.879192] ata21.00: error: { ABRT }
[  215.882997] ata21.00: failed command: WRITE FPDMA QUEUED
[  215.888479] ata21.00: cmd 61/00:00:00:3b:d3/01:00:b3:04:00/40 tag 19 ncq dma 131072 out
                        res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[  215.904814] ata21.00: failed command: WRITE FPDMA QUEUED
[  215.910311] ata21.00: cmd 61/00:00:00:3c:d3/01:00:b3:04:00/40 tag 20 ncq dma 131072 out
                        res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[  215.932679] ata21.00: failed command: WRITE FPDMA QUEUED
[  215.941203] ata21.00: cmd 61/00:00:00:3d:d3/01:00:b3:04:00/40 tag 21 ncq dma 131072 out
                        res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[  215.963616] ata21.00: failed command: WRITE FPDMA QUEUED
[  215.972150] ata21.00: cmd 61/00:00:00:3e:d3/01:00:b3:04:00/40 tag 22 ncq dma 131072 out
                        res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[  215.994532] ata21.00: failed command: WRITE FPDMA QUEUED
[  216.003124] ata21.00: cmd 61/00:00:00:3f:d3/01:00:b3:04:00/40 tag 23 ncq dma 131072 out
                        res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)

HSM (Host State Machine) violation errors.

For the same SATA drive connected via AHCI this will instead give:

[ 3796.944923] ata14.00: exception Emask 0x0 SAct 0x80800003 SErr 0xc0000 action 0x0
[ 3796.959375] ata14.00: irq_stat 0x40000008
[ 3796.970140] ata14: SError: { CommWake 10B8B }
[ 3796.981231] ata14.00: failed command: WRITE FPDMA QUEUED
[ 3796.993237] ata14.00: cmd 61/00:08:00:7e:73/02:00:8e:08:00/40 tag 1 ncq dma 262144 out
                        res 43/04:01:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[ 3797.017984] ata14.00: status: { DRDY SENSE ERR }
[ 3797.026833] ata14.00: error: { ABRT }
[ 3797.034664] ata14.00: failed command: WRITE FPDMA QUEUED
[ 3797.043015] ata14.00: cmd 61/00:b8:00:60:73/0a:00:8e:08:00/40 tag 23 ncq dma 1310720 out
                        res 43/04:00:df:67:73/00:00:8e:08:00/40 Emask 0x400 (NCQ error) <F>
[ 3797.065224] ata14.00: status: { DRDY SENSE ERR }
[ 3797.072914] ata14.00: error: { ABRT }
[ 3797.079598] ata14.00: failed command: WRITE FPDMA QUEUED
[ 3797.087920] ata14.00: cmd 61/00:f8:00:6a:73/0a:00:8e:08:00/40 tag 31 ncq dma 1310720 out
                        res 43/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 3797.109800] ata14.00: status: { DRDY SENSE ERR }
[ 3797.117451] ata14.00: error: { ABRT }

device error errors.


Except for the I/O that caused the NCQ error, the remaining outstanding I/Os,
regardless if they were aborted by the drive, as a side-effect of reading the
NCQ error log (see 13.7.4 Queued Error Log (10h) in SATA 3.5a spec),
or if they were aborted by the host (by sas_ata_device_link_abort()),
I don't think it is correct to report these as HSM violation errors.

HSM violation errors are e.g. when you try to issue a command to a drive
that has ATA_BUSY bit set.


Kind regards,
Niklas

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

On 04/10/2022 14:05, Niklas Cassel wrote:
>> 2.35.3
>>
> For pm80xx (pm8001 changes untested):
> Tested-by: Niklas Cassel<niklas.cassel@wdc.com>
> 
> 

Thanks!

> 
> Notes unrelated to this patch:
> 
> Both before and after this series, this driver prints:
> [  215.845053] ata21.00: exception Emask 0x0 SAct 0xfc0000 SErr 0x0 action 0x6
> [  215.852308] ata21.00: failed command: WRITE FPDMA QUEUED
> [  215.857801] ata21.00: cmd 61/00:00:00:3a:d3/01:00:b3:04:00/40 tag 18 ncq dma 131072 out
>                          res 43/04:00:ff:3a:d3/00:00:b3:04:00/40 Emask 0x400 (NCQ error) <F>
> [  215.874396] ata21.00: status: { DRDY SENSE ERR }
> [  215.879192] ata21.00: error: { ABRT }
> [  215.882997] ata21.00: failed command: WRITE FPDMA QUEUED
> [  215.888479] ata21.00: cmd 61/00:00:00:3b:d3/01:00:b3:04:00/40 tag 19 ncq dma 131072 out
>                          res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
> [  215.904814] ata21.00: failed command: WRITE FPDMA QUEUED
> [  215.910311] ata21.00: cmd 61/00:00:00:3c:d3/01:00:b3:04:00/40 tag 20 ncq dma 131072 out
>                          res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
> [  215.932679] ata21.00: failed command: WRITE FPDMA QUEUED
> [  215.941203] ata21.00: cmd 61/00:00:00:3d:d3/01:00:b3:04:00/40 tag 21 ncq dma 131072 out
>                          res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
> [  215.963616] ata21.00: failed command: WRITE FPDMA QUEUED
> [  215.972150] ata21.00: cmd 61/00:00:00:3e:d3/01:00:b3:04:00/40 tag 22 ncq dma 131072 out
>                          res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
> [  215.994532] ata21.00: failed command: WRITE FPDMA QUEUED
> [  216.003124] ata21.00: cmd 61/00:00:00:3f:d3/01:00:b3:04:00/40 tag 23 ncq dma 131072 out
>                          res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
> 
> HSM (Host State Machine) violation errors.
> 
> For the same SATA drive connected via AHCI this will instead give:
> 
> [ 3796.944923] ata14.00: exception Emask 0x0 SAct 0x80800003 SErr 0xc0000 action 0x0
> [ 3796.959375] ata14.00: irq_stat 0x40000008
> [ 3796.970140] ata14: SError: { CommWake 10B8B }
> [ 3796.981231] ata14.00: failed command: WRITE FPDMA QUEUED
> [ 3796.993237] ata14.00: cmd 61/00:08:00:7e:73/02:00:8e:08:00/40 tag 1 ncq dma 262144 out
>                          res 43/04:01:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
> [ 3797.017984] ata14.00: status: { DRDY SENSE ERR }
> [ 3797.026833] ata14.00: error: { ABRT }
> [ 3797.034664] ata14.00: failed command: WRITE FPDMA QUEUED
> [ 3797.043015] ata14.00: cmd 61/00:b8:00:60:73/0a:00:8e:08:00/40 tag 23 ncq dma 1310720 out
>                          res 43/04:00:df:67:73/00:00:8e:08:00/40 Emask 0x400 (NCQ error) <F>
> [ 3797.065224] ata14.00: status: { DRDY SENSE ERR }
> [ 3797.072914] ata14.00: error: { ABRT }
> [ 3797.079598] ata14.00: failed command: WRITE FPDMA QUEUED
> [ 3797.087920] ata14.00: cmd 61/00:f8:00:6a:73/0a:00:8e:08:00/40 tag 31 ncq dma 1310720 out
>                          res 43/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
> [ 3797.109800] ata14.00: status: { DRDY SENSE ERR }
> [ 3797.117451] ata14.00: error: { ABRT }
> 
> device error errors.
> 
> 
> Except for the I/O that caused the NCQ error, the remaining outstanding I/Os,
> regardless if they were aborted by the drive, as a side-effect of reading the
> NCQ error log (see 13.7.4 Queued Error Log (10h) in SATA 3.5a spec),
> or if they were aborted by the host (by sas_ata_device_link_abort()),
> I don't think it is correct to report these as HSM violation errors.
> 
> HSM violation errors are e.g. when you try to issue a command to a drive
> that has ATA_BUSY bit set.

We had a similar issue for hisi_sas and solved in patch 4/7: don't set 
ATA_ERR in the fis for those IO which complete with error, but abort the 
IO via sas_abort_task().

For pm80xx the IO is either rejected (actually completes with rejection) 
or is aborted via internal abort command. Maybe we can do similar for 
pm8001 as we allow the IO to complete in both cases with error. I'll check.

Thanks,
John

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

On 04/10/2022 15:04, John Garry wrote:
>> Notes unrelated to this patch:
>>
>> Both before and after this series, this driver prints:
>> [  215.845053] ata21.00: exception Emask 0x0 SAct 0xfc0000 SErr 0x0 action 0x6
>> [  215.852308] ata21.00: failed command: WRITE FPDMA QUEUED
>> [  215.857801] ata21.00: cmd 61/00:00:00:3a:d3/01:00:b3:04:00/40 tag 18 ncq dma 131072 out
>>                           res 43/04:00:ff:3a:d3/00:00:b3:04:00/40 Emask 0x400 (NCQ error) <F>
>> [  215.874396] ata21.00: status: { DRDY SENSE ERR }
>> [  215.879192] ata21.00: error: { ABRT }
>> [  215.882997] ata21.00: failed command: WRITE FPDMA QUEUED
>> [  215.888479] ata21.00: cmd 61/00:00:00:3b:d3/01:00:b3:04:00/40 tag 19 ncq dma 131072 out
>>                           res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
>> [  215.904814] ata21.00: failed command: WRITE FPDMA QUEUED
>> [  215.910311] ata21.00: cmd 61/00:00:00:3c:d3/01:00:b3:04:00/40 tag 20 ncq dma 131072 out
>>                           res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
>> [  215.932679] ata21.00: failed command: WRITE FPDMA QUEUED
>> [  215.941203] ata21.00: cmd 61/00:00:00:3d:d3/01:00:b3:04:00/40 tag 21 ncq dma 131072 out
>>                           res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
>> [  215.963616] ata21.00: failed command: WRITE FPDMA QUEUED
>> [  215.972150] ata21.00: cmd 61/00:00:00:3e:d3/01:00:b3:04:00/40 tag 22 ncq dma 131072 out
>>                           res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
>> [  215.994532] ata21.00: failed command: WRITE FPDMA QUEUED
>> [  216.003124] ata21.00: cmd 61/00:00:00:3f:d3/01:00:b3:04:00/40 tag 23 ncq dma 131072 out
>>                           res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
>>
>> HSM (Host State Machine) violation errors.
>>
>> For the same SATA drive connected via AHCI this will instead give:
>>
>> [ 3796.944923] ata14.00: exception Emask 0x0 SAct 0x80800003 SErr 0xc0000 action 0x0
>> [ 3796.959375] ata14.00: irq_stat 0x40000008
>> [ 3796.970140] ata14: SError: { CommWake 10B8B }
>> [ 3796.981231] ata14.00: failed command: WRITE FPDMA QUEUED
>> [ 3796.993237] ata14.00: cmd 61/00:08:00:7e:73/02:00:8e:08:00/40 tag 1 ncq dma 262144 out
>>                           res 43/04:01:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
>> [ 3797.017984] ata14.00: status: { DRDY SENSE ERR }
>> [ 3797.026833] ata14.00: error: { ABRT }
>> [ 3797.034664] ata14.00: failed command: WRITE FPDMA QUEUED
>> [ 3797.043015] ata14.00: cmd 61/00:b8:00:60:73/0a:00:8e:08:00/40 tag 23 ncq dma 1310720 out
>>                           res 43/04:00:df:67:73/00:00:8e:08:00/40 Emask 0x400 (NCQ error) <F>
>> [ 3797.065224] ata14.00: status: { DRDY SENSE ERR }
>> [ 3797.072914] ata14.00: error: { ABRT }
>> [ 3797.079598] ata14.00: failed command: WRITE FPDMA QUEUED
>> [ 3797.087920] ata14.00: cmd 61/00:f8:00:6a:73/0a:00:8e:08:00/40 tag 31 ncq dma 1310720 out
>>                           res 43/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
>> [ 3797.109800] ata14.00: status: { DRDY SENSE ERR }
>> [ 3797.117451] ata14.00: error: { ABRT }
>>
>> device error errors.
>>
>>
>> Except for the I/O that caused the NCQ error, the remaining outstanding I/Os,
>> regardless if they were aborted by the drive, as a side-effect of reading the
>> NCQ error log (see 13.7.4 Queued Error Log (10h) in SATA 3.5a spec),
>> or if they were aborted by the host (by sas_ata_device_link_abort()),
>> I don't think it is correct to report these as HSM violation errors.
>>
>> HSM violation errors are e.g. when you try to issue a command to a drive
>> that has ATA_BUSY bit set.
> We had a similar issue for hisi_sas and solved in patch 4/7: don't set
> ATA_ERR in the fis for those IO which complete with error, but abort the
> IO via sas_abort_task().
> 
> For pm80xx the IO is either rejected (actually completes with rejection)
> or is aborted via internal abort command. Maybe we can do similar for
> pm8001 as we allow the IO to complete in both cases with error. I'll check.

Hi Niklas,

Could you try a change like this on top:

void sas_ata_device_link_abort(struct domain_device *device, bool 
force_reset)
{
	struct ata_port *ap = device->sata_dev.ap;
	struct ata_link *link = &ap->link;

+	device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
+	device->sata_dev.fis[3] = 0x04;

	link->eh_info.err_mask |= AC_ERR_DEV;
	if (force_reset)
		link->eh_info.action |= ATA_EH_RESET;
	ata_link_abort(link);
}
EXPORT_SYMBOL_GPL(sas_ata_device_link_abort);

I tried it myself and it looked to work ok, except I have a problem with 
my arm64 system in that the read log ext times-out and all TF show 
"device error", like:

[  350.257870] ata1.00: qc timeout (cmd 0x47)
[  350.262054] pm80xx0:: mpi_sata_completion 2293: task null, freeing 
CCB tag 2
[  350.269128] ata1.00: Read log 0x10 page 0x00 failed, Emask 0x40

[  350.281581] ata1: failed to read log page 10h (errno=-5)
[  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 
action 0x6 frozen
[  350.584836] ata1.00: failed command: READ FPDMA QUEUED
[  350.589970] ata1.00: cmd 60/00:00:80:26:00/01:00:00:00:00/40 tag 0 
ncq dma 131072 in
          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device 
error)
[  350.605533] ata1.00: status: { DRDY ERR }
[  350.609541] ata1.00: error: { ABRT }
[  350.613115] ata1.00: failed command: READ FPDMA QUEUED
[  350.618248] ata1.00: cmd 60/00:00:80:26:00/01:00:00:00:00/40 tag 1 
ncq dma 131072 in
          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device 
error)
[  350.633809] ata1.00: status: { DRDY ERR
[  350.637813] ata1.00: error: { ABRT }
[  350.641384] ata1.00: failed command: READ FPDMA QUEUED
[  350.646515] ata1.00: cmd 60/00:00:80:26:00/01:00:00:00:00/40 tag 2 
ncq dma 131072 in
          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device 
error)
[  350.662076] ata1.00: status: { DRDY ERR
[  350.666080] ata1.00: error: { ABRT }
[  350.669652] ata1.00: failed command: READ FPDMA QUEUED
[  350.674784] ata1.00: cmd 60/00:00:d8:26:00/01:00:00:00:00/40 tag 3 
ncq dma 131072 in
          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device 
error)
[  350.690344] ata1.00: status: { DRDY ERR
[  350.694348] ata1.00: error: { ABRT }
[  350.697919] ata1.00: failed command: READ FPDMA QUEUED
[  350.703051] ata1.00: cmd 60/00:00:e0:26:00/01:00:00:00:00/40 tag 4 
ncq dma 131072 in
          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device 
error)
[  350.718612] ata1.00: status: { DRDY ERR
[  350.722623] ata1.00: error: { ABRT }
[  350.726196] ata1.00: failed command: READ FPDMA QUEUED
[  350.731329] ata1.00: cmd 60/00:00:c8:26:00/01:00:00:00:00/40 tag 5 
ncq dma 131072 in
          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device 
error)

...


Thanks,
John

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Niklas Cassel]

On Wed, Oct 05, 2022 at 09:53:52AM +0100, John Garry wrote:
> On 04/10/2022 15:04, John Garry wrote:
> 
> Hi Niklas,
> 
> Could you try a change like this on top:
> 
> void sas_ata_device_link_abort(struct domain_device *device, bool
> force_reset)
> {
> 	struct ata_port *ap = device->sata_dev.ap;
> 	struct ata_link *link = &ap->link;
> 
> +	device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
> +	device->sata_dev.fis[3] = 0x04;
> 
> 	link->eh_info.err_mask |= AC_ERR_DEV;
> 	if (force_reset)
> 		link->eh_info.action |= ATA_EH_RESET;
> 	ata_link_abort(link);
> }
> EXPORT_SYMBOL_GPL(sas_ata_device_link_abort);
> 
> I tried it myself and it looked to work ok, except I have a problem with my
> arm64 system in that the read log ext times-out and all TF show "device
> error", like:

Do you know why it fails to read the log?
Can you read the NCQ Command Error log using ATA16 passthrough commands?

sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc

The first byte is the last NCQ tag (in hex) that failed.


I tried your patch, and it looks good:

[ 6656.228131] ata5.00: exception Emask 0x0 SAct 0x460000 SErr 0x0 action 0x0
[ 6656.252759] ata5.00: failed command: WRITE FPDMA QUEUED
[ 6656.271554] ata5.00: cmd 61/00:00:00:d8:8a/04:00:ce:03:00/40 tag 17 ncq dma 524288 out
                        res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 6656.309308] ata5.00: status: { DRDY ERR }
[ 6656.316403] ata5.00: error: { ABRT }
[ 6656.322300] ata5.00: failed command: WRITE FPDMA QUEUED
[ 6656.330871] ata5.00: cmd 61/00:00:00:dc:8a/04:00:ce:03:00/40 tag 18 ncq dma 524288 out
                        res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 6656.356295] ata5.00: status: { DRDY ERR }
[ 6656.362931] ata5.00: error: { ABRT }
[ 6656.368897] ata5.00: failed command: WRITE FPDMA QUEUED
[ 6656.377471] ata5.00: cmd 61/00:00:00:d4:8a/04:00:ce:03:00/40 tag 22 ncq dma 524288 out
                        res 43/04:00:ff:d7:8a/00:00:ce:03:00/40 Emask 0x400 (NCQ error) <F>
[ 6656.403149] ata5.00: status: { DRDY SENSE ERR }
[ 6656.410624] ata5.00: error: { ABRT }

However, since this is a change from the existing behavior of this driver,
this could go as a separate patch, and does not need to delay this series.



I also think that we should do a similar patch for sas_ata_task_done():

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index d35c9296f738..648d0693ceee 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -140,7 +140,7 @@ static void sas_ata_task_done(struct sas_task *task)
                        }
 
                        dev->sata_dev.fis[3] = 0x04; /* status err */
-                       dev->sata_dev.fis[2] = ATA_ERR;
+                       dev->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
                }
        }

To avoid all SAS errors from being reported as HSM errors.


Kind regards,
Niklas

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Damien Le Moal]

On 10/6/22 06:28, Niklas Cassel wrote:
> On Wed, Oct 05, 2022 at 09:53:52AM +0100, John Garry wrote:
>> On 04/10/2022 15:04, John Garry wrote:
>>
>> Hi Niklas,
>>
>> Could you try a change like this on top:
>>
>> void sas_ata_device_link_abort(struct domain_device *device, bool
>> force_reset)
>> {
>> 	struct ata_port *ap = device->sata_dev.ap;
>> 	struct ata_link *link = &ap->link;
>>
>> +	device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
>> +	device->sata_dev.fis[3] = 0x04;
>>
>> 	link->eh_info.err_mask |= AC_ERR_DEV;
>> 	if (force_reset)
>> 		link->eh_info.action |= ATA_EH_RESET;
>> 	ata_link_abort(link);
>> }
>> EXPORT_SYMBOL_GPL(sas_ata_device_link_abort);
>>
>> I tried it myself and it looked to work ok, except I have a problem with my
>> arm64 system in that the read log ext times-out and all TF show "device
>> error", like:
> 
> Do you know why it fails to read the log?
> Can you read the NCQ Command Error log using ATA16 passthrough commands?
> 
> sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
> 
> The first byte is the last NCQ tag (in hex) that failed.

libata issues read log as a non-ncq command under EH. So the NCQ error log
will not help.

> 
> 
> I tried your patch, and it looks good:
> 
> [ 6656.228131] ata5.00: exception Emask 0x0 SAct 0x460000 SErr 0x0 action 0x0
> [ 6656.252759] ata5.00: failed command: WRITE FPDMA QUEUED
> [ 6656.271554] ata5.00: cmd 61/00:00:00:d8:8a/04:00:ce:03:00/40 tag 17 ncq dma 524288 out
>                         res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
> [ 6656.309308] ata5.00: status: { DRDY ERR }
> [ 6656.316403] ata5.00: error: { ABRT }
> [ 6656.322300] ata5.00: failed command: WRITE FPDMA QUEUED
> [ 6656.330871] ata5.00: cmd 61/00:00:00:dc:8a/04:00:ce:03:00/40 tag 18 ncq dma 524288 out
>                         res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
> [ 6656.356295] ata5.00: status: { DRDY ERR }
> [ 6656.362931] ata5.00: error: { ABRT }
> [ 6656.368897] ata5.00: failed command: WRITE FPDMA QUEUED
> [ 6656.377471] ata5.00: cmd 61/00:00:00:d4:8a/04:00:ce:03:00/40 tag 22 ncq dma 524288 out
>                         res 43/04:00:ff:d7:8a/00:00:ce:03:00/40 Emask 0x400 (NCQ error) <F>
> [ 6656.403149] ata5.00: status: { DRDY SENSE ERR }
> [ 6656.410624] ata5.00: error: { ABRT }
> 
> However, since this is a change from the existing behavior of this driver,
> this could go as a separate patch, and does not need to delay this series.
> 
> 
> 
> I also think that we should do a similar patch for sas_ata_task_done():
> 
> diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
> index d35c9296f738..648d0693ceee 100644
> --- a/drivers/scsi/libsas/sas_ata.c
> +++ b/drivers/scsi/libsas/sas_ata.c
> @@ -140,7 +140,7 @@ static void sas_ata_task_done(struct sas_task *task)
>                         }
>  
>                         dev->sata_dev.fis[3] = 0x04; /* status err */
> -                       dev->sata_dev.fis[2] = ATA_ERR;
> +                       dev->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
>                 }
>         }
> 
> To avoid all SAS errors from being reported as HSM errors.
> 
> 
> Kind regards,
> Niklas

-- 
Damien Le Moal
Western Digital Research

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Niklas Cassel]

On Thu, Oct 06, 2022 at 06:36:05AM +0900, Damien Le Moal wrote:
> On 10/6/22 06:28, Niklas Cassel wrote:
> > On Wed, Oct 05, 2022 at 09:53:52AM +0100, John Garry wrote:
> >> On 04/10/2022 15:04, John Garry wrote:
> >>
> >> Hi Niklas,
> >>
> >> Could you try a change like this on top:
> >>
> >> void sas_ata_device_link_abort(struct domain_device *device, bool
> >> force_reset)
> >> {
> >> 	struct ata_port *ap = device->sata_dev.ap;
> >> 	struct ata_link *link = &ap->link;
> >>
> >> +	device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
> >> +	device->sata_dev.fis[3] = 0x04;
> >>
> >> 	link->eh_info.err_mask |= AC_ERR_DEV;
> >> 	if (force_reset)
> >> 		link->eh_info.action |= ATA_EH_RESET;
> >> 	ata_link_abort(link);
> >> }
> >> EXPORT_SYMBOL_GPL(sas_ata_device_link_abort);
> >>
> >> I tried it myself and it looked to work ok, except I have a problem with my
> >> arm64 system in that the read log ext times-out and all TF show "device
> >> error", like:
> > 
> > Do you know why it fails to read the log?
> > Can you read the NCQ Command Error log using ATA16 passthrough commands?
> > 
> > sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
> > 
> > The first byte is the last NCQ tag (in hex) that failed.
> 
> libata issues read log as a non-ncq command under EH. So the NCQ error log
> will not help.

Hello Damien,

John explained that he got a timeout from EH when reading the log:
[  350.281581] ata1: failed to read log page 10h (errno=-5)
[  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen

ata_eh_read_log_10h() uses ata_read_log_page(), which will first try to read
the log using READ LOG DMA EXT. If that fails, it will retry using READ LOG EXT.

Therefore, to see if this is a driver specific bug, I suggested to try to read
the NCQ Command Error log using ATA16 passthrough commands:

$ sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
will read the log using READ LOG DMA EXT.

$ sudo sg_sat_read_gplog --log=0x10 /dev/sdc
will read the log using READ LOG EXT.

Neither of these two suggested commands are NCQ commands.
(Neither command is encapsulated in a RECEIVE FPDMA QUEUED,
so I'm not sure what you mean.)


Garry, I now see that:
[  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
Your port is frozen.

ata_read_log_page() calls ata_exec_internal() which calls ata_exec_internal_sg(),
which will simply return an error without sending down the command to the drive,
if the port is frozen.

Not sure why your port is frozen, mine is obviously not.

ata_do_link_abort() calls ata_eh_set_pending() without activating fast drain:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-eh.c?h=v6.0#n989

So I'm not sure why your port is frozen.
(The fast drain timer does freeze the port, but it shouldn't be enabled.)
It might be worthwhile to see who freezes the port in your case.


Kind regards,
Niklas

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Damien Le Moal]

On 10/6/22 07:11, Niklas Cassel wrote:
> On Thu, Oct 06, 2022 at 06:36:05AM +0900, Damien Le Moal wrote:
>> On 10/6/22 06:28, Niklas Cassel wrote:
>>> On Wed, Oct 05, 2022 at 09:53:52AM +0100, John Garry wrote:
>>>> On 04/10/2022 15:04, John Garry wrote:
>>>>
>>>> Hi Niklas,
>>>>
>>>> Could you try a change like this on top:
>>>>
>>>> void sas_ata_device_link_abort(struct domain_device *device, bool
>>>> force_reset)
>>>> {
>>>> 	struct ata_port *ap = device->sata_dev.ap;
>>>> 	struct ata_link *link = &ap->link;
>>>>
>>>> +	device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
>>>> +	device->sata_dev.fis[3] = 0x04;
>>>>
>>>> 	link->eh_info.err_mask |= AC_ERR_DEV;
>>>> 	if (force_reset)
>>>> 		link->eh_info.action |= ATA_EH_RESET;
>>>> 	ata_link_abort(link);
>>>> }
>>>> EXPORT_SYMBOL_GPL(sas_ata_device_link_abort);
>>>>
>>>> I tried it myself and it looked to work ok, except I have a problem with my
>>>> arm64 system in that the read log ext times-out and all TF show "device
>>>> error", like:
>>>
>>> Do you know why it fails to read the log?
>>> Can you read the NCQ Command Error log using ATA16 passthrough commands?
>>>
>>> sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
>>>
>>> The first byte is the last NCQ tag (in hex) that failed.
>>
>> libata issues read log as a non-ncq command under EH. So the NCQ error log
>> will not help.
> 
> Hello Damien,
> 
> John explained that he got a timeout from EH when reading the log:
> [  350.281581] ata1: failed to read log page 10h (errno=-5)
> [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
> 
> ata_eh_read_log_10h() uses ata_read_log_page(), which will first try to read
> the log using READ LOG DMA EXT. If that fails, it will retry using READ LOG EXT.
> 
> Therefore, to see if this is a driver specific bug, I suggested to try to read
> the NCQ Command Error log using ATA16 passthrough commands:
> 
> $ sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
> will read the log using READ LOG DMA EXT.
> 
> $ sudo sg_sat_read_gplog --log=0x10 /dev/sdc
> will read the log using READ LOG EXT.
> 
> Neither of these two suggested commands are NCQ commands.
> (Neither command is encapsulated in a RECEIVE FPDMA QUEUED,
> so I'm not sure what you mean.)
> 
> 
> Garry, I now see that:
> [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
> Your port is frozen.
> 
> ata_read_log_page() calls ata_exec_internal() which calls ata_exec_internal_sg(),
> which will simply return an error without sending down the command to the drive,
> if the port is frozen.
> 
> Not sure why your port is frozen, mine is obviously not.
> 
> ata_do_link_abort() calls ata_eh_set_pending() without activating fast drain:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-eh.c?h=v6.0#n989
> 
> So I'm not sure why your port is frozen.
> (The fast drain timer does freeze the port, but it shouldn't be enabled.)
> It might be worthwhile to see who freezes the port in your case.

Might come from the command timeout. John has had many problems with the
pm80xx HBA in his Arm machine from a while back. Likely not a driver issue
but a hw one... No-one seems to be able to recreate the same problem.

We need to try the HBA on our Arm board to see what happens.

> 
> 
> Kind regards,
> Niklas

-- 
Damien Le Moal
Western Digital Research

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

On 05/10/2022 23:42, Damien Le Moal wrote:
>> Hello Damien,
>>
>> John explained that he got a timeout from EH when reading the log:
>> [  350.281581] ata1: failed to read log page 10h (errno=-5)
>> [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
>>
>> ata_eh_read_log_10h() uses ata_read_log_page(), which will first try to read
>> the log using READ LOG DMA EXT. If that fails, it will retry using READ LOG EXT.
>>
>> Therefore, to see if this is a driver specific bug, I suggested to try to read
>> the NCQ Command Error log using ATA16 passthrough commands:
>>
>> $ sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
>> will read the log using READ LOG DMA EXT.
>>
>> $ sudo sg_sat_read_gplog --log=0x10 /dev/sdc
>> will read the log using READ LOG EXT.

Note that I can't get a distro to boot on this system from the HDD for 
the same timeout problem (so no tools easily available).

>>
>> Neither of these two suggested commands are NCQ commands.
>> (Neither command is encapsulated in a RECEIVE FPDMA QUEUED,
>> so I'm not sure what you mean.)
>>
>>
>> Garry, I now see that:
>> [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
>> Your port is frozen.
>>
>> ata_read_log_page() calls ata_exec_internal() which calls ata_exec_internal_sg(),
>> which will simply return an error without sending down the command to the drive,
>> if the port is frozen.
>>
>> Not sure why your port is frozen, mine is obviously not.

I think that it gets frozen when the internal command for read log ext 
times out. More below about that timeout.

>>
>> ata_do_link_abort() calls ata_eh_set_pending() without activating fast drain:
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-eh.c?h=v6.0#n989
>>
>> So I'm not sure why your port is frozen.
>> (The fast drain timer does freeze the port, but it shouldn't be enabled.)
>> It might be worthwhile to see who freezes the port in your case.
> Might come from the command timeout. John has had many problems with the
> pm80xx HBA in his Arm machine from a while back. Likely not a driver issue
> but a hw one... No-one seems to be able to recreate the same problem.
> 
> We need to try the HBA on our Arm board to see what happens.
> 

Yeah, it just looks to be the longstanding issue of using this card on 
my arm64 machine - that is that I get IO timeouts quite regularly. I 
should have mentioned that yesterday. This just seems to be a driver issue.

Interestingly this read log ext always seems to timeout, so maybe I 
could see if there is anything specific about this command which could 
give a clue to the underlying issue. But I have spent much time trying 
to debug this issue, so not too motivated any more if I’m completely 
honest ...

Thanks,
John

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

On 05/10/2022 22:28, Niklas Cassel wrote:
> Do you know why it fails to read the log?
> Can you read the NCQ Command Error log using ATA16 passthrough commands?
> 
> sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
> 
> The first byte is the last NCQ tag (in hex) that failed.

Please see other reply.

> 
> 
> I tried your patch, and it looks good:

Thanks, good to know.

> 
> [ 6656.228131] ata5.00: exception Emask 0x0 SAct 0x460000 SErr 0x0 action 0x0
> [ 6656.252759] ata5.00: failed command: WRITE FPDMA QUEUED
> [ 6656.271554] ata5.00: cmd 61/00:00:00:d8:8a/04:00:ce:03:00/40 tag 17 ncq dma 524288 out
>                          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
> [ 6656.309308] ata5.00: status: { DRDY ERR }
> [ 6656.316403] ata5.00: error: { ABRT }
> [ 6656.322300] ata5.00: failed command: WRITE FPDMA QUEUED
> [ 6656.330871] ata5.00: cmd 61/00:00:00:dc:8a/04:00:ce:03:00/40 tag 18 ncq dma 524288 out
>                          res 41/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
> [ 6656.356295] ata5.00: status: { DRDY ERR }
> [ 6656.362931] ata5.00: error: { ABRT }
> [ 6656.368897] ata5.00: failed command: WRITE FPDMA QUEUED
> [ 6656.377471] ata5.00: cmd 61/00:00:00:d4:8a/04:00:ce:03:00/40 tag 22 ncq dma 524288 out
>                          res 43/04:00:ff:d7:8a/00:00:ce:03:00/40 Emask 0x400 (NCQ error) <F>
> [ 6656.403149] ata5.00: status: { DRDY SENSE ERR }
> [ 6656.410624] ata5.00: error: { ABRT }
> 
> However, since this is a change from the existing behavior of this driver,
> this could go as a separate patch, and does not need to delay this series.
> 
> 

ok, but I am not sure about this series for 6.1 since it's now, so I 
will just wait.

> 
> I also think that we should do a similar patch for sas_ata_task_done():
> 
> diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
> index d35c9296f738..648d0693ceee 100644
> --- a/drivers/scsi/libsas/sas_ata.c
> +++ b/drivers/scsi/libsas/sas_ata.c
> @@ -140,7 +140,7 @@ static void sas_ata_task_done(struct sas_task *task)
>                          }
>   
>                          dev->sata_dev.fis[3] = 0x04; /* status err */
> -                       dev->sata_dev.fis[2] = ATA_ERR;
> +                       dev->sata_dev.fis[2] = ATA_ERR | ATA_DRDY;
>                  }
>          }
> 
> To avoid all SAS errors from being reported as HSM errors.

Yeah, I tend to agree. I can put that change in another patch.

Thanks,
John

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Niklas Cassel]

On Thu, Oct 06, 2022 at 09:33:23AM +0100, John Garry wrote:
> On 05/10/2022 23:42, Damien Le Moal wrote:
> > > Hello Damien,
> > > 
> > > John explained that he got a timeout from EH when reading the log:
> > > [  350.281581] ata1: failed to read log page 10h (errno=-5)
> > > [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
> > > 
> > > ata_eh_read_log_10h() uses ata_read_log_page(), which will first try to read
> > > the log using READ LOG DMA EXT. If that fails, it will retry using READ LOG EXT.
> > > 
> > > Therefore, to see if this is a driver specific bug, I suggested to try to read
> > > the NCQ Command Error log using ATA16 passthrough commands:
> > > 
> > > $ sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
> > > will read the log using READ LOG DMA EXT.
> > > 
> > > $ sudo sg_sat_read_gplog --log=0x10 /dev/sdc
> > > will read the log using READ LOG EXT.
> 
> Note that I can't get a distro to boot on this system from the HDD for the
> same timeout problem (so no tools easily available).
> 
> > > 
> > > Neither of these two suggested commands are NCQ commands.
> > > (Neither command is encapsulated in a RECEIVE FPDMA QUEUED,
> > > so I'm not sure what you mean.)
> > > 
> > > 
> > > Garry, I now see that:
> > > [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
> > > Your port is frozen.
> > > 
> > > ata_read_log_page() calls ata_exec_internal() which calls ata_exec_internal_sg(),
> > > which will simply return an error without sending down the command to the drive,
> > > if the port is frozen.
> > > 
> > > Not sure why your port is frozen, mine is obviously not.
> 
> I think that it gets frozen when the internal command for read log ext times
> out. More below about that timeout.

ata_read_log_page() will first try to read using READ LOG DMA EXT.
If that fails it will retry with READ LOG EXT.

Your log has this:
[  350.257870] ata1.00: qc timeout (cmd 0x47)

So it is definitely ATA_CMD_READ_LOG_DMA_EXT that times out.

On timeout, ata_exec_internal_sg() will freeze the port:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-core.c?h=v6.0#n1577

When ata_read_log_page() retries with the port frozen,
READ LOG EXT will obviously fail (since the port is frozen).

Not sure why READ LOG DMA EXT would timeout for you...
Perhaps your drive does not implement this command,
and incorrectly reports supporting this command via
ata_id_has_read_log_dma_ext().

Perhaps you could try boot your kernel with libata.force=nodmalog
on the kernel command line, so that ata_read_log_page() will use
READ LOG EXT on the first try.


Damien, it seems that there is no use in retrying if the port
is frozen/we got a timeout, so perhaps:

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e74ab6c0f1a0..1aa628332c8e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2035,7 +2035,8 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
        if (err_mask) {
                if (dma) {
                        dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
-                       goto retry;
+                       if (err_mask != AC_ERR_TIMEOUT)
+                               goto retry;
                }

or:

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e74ab6c0f1a0..2fa03b7573ac 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2035,7 +2035,8 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
        if (err_mask) {
                if (dma) {
                        dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
-                       goto retry;
+                       if (!(dev->link->ap->pflags & ATA_PFLAG_FROZEN))
+                               goto retry;
                }

would be in order, so that we actually print the real error, instead of a bogus
AC_ERR_SYSTEM (returned by ata_exec_internal_sg()) when the port is frozen.

> 
> > > 
> > > ata_do_link_abort() calls ata_eh_set_pending() without activating fast drain:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-eh.c?h=v6.0#n989
> > > 
> > > So I'm not sure why your port is frozen.
> > > (The fast drain timer does freeze the port, but it shouldn't be enabled.)
> > > It might be worthwhile to see who freezes the port in your case.
> > Might come from the command timeout. John has had many problems with the
> > pm80xx HBA in his Arm machine from a while back. Likely not a driver issue
> > but a hw one... No-one seems to be able to recreate the same problem.
> > 
> > We need to try the HBA on our Arm board to see what happens.
> > 
> 
> Yeah, it just looks to be the longstanding issue of using this card on my
> arm64 machine - that is that I get IO timeouts quite regularly. I should
> have mentioned that yesterday. This just seems to be a driver issue.

Out of curiosity, which arm64 SoC is this?

While it is very unlikely that this is your problem, but I've encountered
an issue on an ARM board before, where the PCIe controller was incorrectly
configured in device tree, causing the controller to miss interrrupts,
which presented itself to the user as timeouts in the WiFi driver:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=97131f85c08e024df49480ed499aae8fb754067f


Kind regards,
Niklas

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

On 06/10/2022 15:45, Niklas Cassel wrote:
>> I think that it gets frozen when the internal command for read log ext times
>> out. More below about that timeout.
> ata_read_log_page() will first try to read using READ LOG DMA EXT.
> If that fails it will retry with READ LOG EXT.
> 
> Your log has this:
> [  350.257870] ata1.00: qc timeout (cmd 0x47)
> 
> So it is definitely ATA_CMD_READ_LOG_DMA_EXT that times out.
> 
> On timeout, ata_exec_internal_sg() will freeze the port:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-core.c?h=v6.0#n1577
> 
> When ata_read_log_page() retries with the port frozen,
> READ LOG EXT will obviously fail (since the port is frozen).
> 
> Not sure why READ LOG DMA EXT would timeout for you...
> Perhaps your drive does not implement this command,
> and incorrectly reports supporting this command via
> ata_id_has_read_log_dma_ext().
> 
> Perhaps you could try boot your kernel with libata.force=nodmalog
> on the kernel command line, so that ata_read_log_page() will use
> READ LOG EXT on the first try.
> 

I tried that and unfortunately it does not appear to help.

I get this log, which proves no dmalog

[   15.757617] ata1.00: FORCE: horkage modified (nodmalog)

but then still fails with timeout:

[  123.094430] ata1.00: qc timeout (cmd 0x2f)
[  123.098637] pm80xx0:: mpi_sata_completion 2293: task null, freeing 
CCB tag 2
[  123.105711] ata1.00: Read log 0x10 page 0x00 failed, Emask 0x5
[  123.118081] ata1: failed to read log page 10h (errno=-5)

> 
> Damien, it seems that there is no use in retrying if the port
> is frozen/we got a timeout, so perhaps:
> 
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index e74ab6c0f1a0..1aa628332c8e 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -2035,7 +2035,8 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
>          if (err_mask) {
>                  if (dma) {
>                          dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
> -                       goto retry;
> +                       if (err_mask != AC_ERR_TIMEOUT)
> +                               goto retry;
>                  }
> 
> or:
> 
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index e74ab6c0f1a0..2fa03b7573ac 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -2035,7 +2035,8 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
>          if (err_mask) {
>                  if (dma) {
>                          dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
> -                       goto retry;
> +                       if (!(dev->link->ap->pflags & ATA_PFLAG_FROZEN))
> +                               goto retry;
>                  }
> 
> would be in order, so that we actually print the real error, instead of a bogus
> AC_ERR_SYSTEM (returned by ata_exec_internal_sg()) when the port is frozen.
> 
>>>> ata_do_link_abort() calls ata_eh_set_pending() without activating fast drain:
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-eh.c?h=v6.0#n989
>>>>
>>>> So I'm not sure why your port is frozen.
>>>> (The fast drain timer does freeze the port, but it shouldn't be enabled.)
>>>> It might be worthwhile to see who freezes the port in your case.
>>> Might come from the command timeout. John has had many problems with the
>>> pm80xx HBA in his Arm machine from a while back. Likely not a driver issue
>>> but a hw one... No-one seems to be able to recreate the same problem.
>>>
>>> We need to try the HBA on our Arm board to see what happens.
>>>
>> Yeah, it just looks to be the longstanding issue of using this card on my
>> arm64 machine - that is that I get IO timeouts quite regularly. I should
>> have mentioned that yesterday. This just seems to be a driver issue.
> Out of curiosity, which arm64 SoC is this?

HiSilicon hi1620 which contains a custom arm v8 implementation. Note 
that others have also seen the issue with this card on other arm 
implementations.

> 
> While it is very unlikely that this is your problem, but I've encountered
> an issue on an ARM board before, where the PCIe controller was incorrectly
> configured in device tree, causing the controller to miss interrrupts,
> which presented itself to the user as timeouts in the WiFi driver:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=97131f85c08e024df49480ed499aae8fb754067f

Unlikely. Indeed, when I was checking this issue some time go, I found 
that not only was there no completion interrupt but also no completion 
when I manually examine the completion ring buffer read and write pointers.

Here's where I discuss this issue earlier a bit:
https://lore.kernel.org/linux-scsi/PH0PR11MB511238B8FF7B44C375DDDFADEC519@PH0PR11MB5112.namprd11.prod.outlook.com/

Thanks,
John

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Damien Le Moal]

On 10/6/22 23:45, Niklas Cassel wrote:
> On Thu, Oct 06, 2022 at 09:33:23AM +0100, John Garry wrote:
>> On 05/10/2022 23:42, Damien Le Moal wrote:
>>>> Hello Damien,
>>>>
>>>> John explained that he got a timeout from EH when reading the log:
>>>> [  350.281581] ata1: failed to read log page 10h (errno=-5)
>>>> [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
>>>>
>>>> ata_eh_read_log_10h() uses ata_read_log_page(), which will first try to read
>>>> the log using READ LOG DMA EXT. If that fails, it will retry using READ LOG EXT.
>>>>
>>>> Therefore, to see if this is a driver specific bug, I suggested to try to read
>>>> the NCQ Command Error log using ATA16 passthrough commands:
>>>>
>>>> $ sudo sg_sat_read_gplog -d --log=0x10 /dev/sdc
>>>> will read the log using READ LOG DMA EXT.
>>>>
>>>> $ sudo sg_sat_read_gplog --log=0x10 /dev/sdc
>>>> will read the log using READ LOG EXT.
>>
>> Note that I can't get a distro to boot on this system from the HDD for the
>> same timeout problem (so no tools easily available).
>>
>>>>
>>>> Neither of these two suggested commands are NCQ commands.
>>>> (Neither command is encapsulated in a RECEIVE FPDMA QUEUED,
>>>> so I'm not sure what you mean.)
>>>>
>>>>
>>>> Garry, I now see that:
>>>> [  350.577181] ata1.00: exception Emask 0x1 SAct 0xffffffff SErr 0x0 action 0x6 frozen
>>>> Your port is frozen.
>>>>
>>>> ata_read_log_page() calls ata_exec_internal() which calls ata_exec_internal_sg(),
>>>> which will simply return an error without sending down the command to the drive,
>>>> if the port is frozen.
>>>>
>>>> Not sure why your port is frozen, mine is obviously not.
>>
>> I think that it gets frozen when the internal command for read log ext times
>> out. More below about that timeout.
> 
> ata_read_log_page() will first try to read using READ LOG DMA EXT.
> If that fails it will retry with READ LOG EXT.
> 
> Your log has this:
> [  350.257870] ata1.00: qc timeout (cmd 0x47)
> 
> So it is definitely ATA_CMD_READ_LOG_DMA_EXT that times out.
> 
> On timeout, ata_exec_internal_sg() will freeze the port:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-core.c?h=v6.0#n1577
> 
> When ata_read_log_page() retries with the port frozen,
> READ LOG EXT will obviously fail (since the port is frozen).
> 
> Not sure why READ LOG DMA EXT would timeout for you...
> Perhaps your drive does not implement this command,
> and incorrectly reports supporting this command via
> ata_id_has_read_log_dma_ext().
> 
> Perhaps you could try boot your kernel with libata.force=nodmalog
> on the kernel command line, so that ata_read_log_page() will use
> READ LOG EXT on the first try.
> 
> 
> Damien, it seems that there is no use in retrying if the port
> is frozen/we got a timeout, so perhaps:
> 
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index e74ab6c0f1a0..1aa628332c8e 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -2035,7 +2035,8 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
>         if (err_mask) {
>                 if (dma) {
>                         dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
> -                       goto retry;
> +                       if (err_mask != AC_ERR_TIMEOUT)
> +                               goto retry;
>                 }
> 
> or:
> 
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index e74ab6c0f1a0..2fa03b7573ac 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -2035,7 +2035,8 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
>         if (err_mask) {
>                 if (dma) {
>                         dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
> -                       goto retry;
> +                       if (!(dev->link->ap->pflags & ATA_PFLAG_FROZEN))
> +                               goto retry;

Yes, something like this is needed. Though I would prefer having a little
ata_port_frozen() helper for the condition.

>                 }
> 
> would be in order, so that we actually print the real error, instead of a bogus
> AC_ERR_SYSTEM (returned by ata_exec_internal_sg()) when the port is frozen.

yep.

>>
>>>>
>>>> ata_do_link_abort() calls ata_eh_set_pending() without activating fast drain:
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/libata-eh.c?h=v6.0#n989
>>>>
>>>> So I'm not sure why your port is frozen.
>>>> (The fast drain timer does freeze the port, but it shouldn't be enabled.)
>>>> It might be worthwhile to see who freezes the port in your case.
>>> Might come from the command timeout. John has had many problems with the
>>> pm80xx HBA in his Arm machine from a while back. Likely not a driver issue
>>> but a hw one... No-one seems to be able to recreate the same problem.
>>>
>>> We need to try the HBA on our Arm board to see what happens.
>>>
>>
>> Yeah, it just looks to be the longstanding issue of using this card on my
>> arm64 machine - that is that I get IO timeouts quite regularly. I should
>> have mentioned that yesterday. This just seems to be a driver issue.
> 
> Out of curiosity, which arm64 SoC is this?
> 
> While it is very unlikely that this is your problem, but I've encountered
> an issue on an ARM board before, where the PCIe controller was incorrectly
> configured in device tree, causing the controller to miss interrrupts,
> which presented itself to the user as timeouts in the WiFi driver:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=97131f85c08e024df49480ed499aae8fb754067f
> 
> 
> Kind regards,
> Niklas

-- 
Damien Le Moal
Western Digital Research

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Niklas Cassel]

On Thu, Oct 06, 2022 at 05:41:40PM +0100, John Garry wrote:
> > > > 
> > > Yeah, it just looks to be the longstanding issue of using this card on my
> > > arm64 machine - that is that I get IO timeouts quite regularly. I should
> > > have mentioned that yesterday. This just seems to be a driver issue.
> > Out of curiosity, which arm64 SoC is this?
> 
> HiSilicon hi1620 which contains a custom arm v8 implementation. Note that
> others have also seen the issue with this card on other arm implementations.
> 
> > 
> > While it is very unlikely that this is your problem, but I've encountered
> > an issue on an ARM board before, where the PCIe controller was incorrectly
> > configured in device tree, causing the controller to miss interrrupts,
> > which presented itself to the user as timeouts in the WiFi driver:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=97131f85c08e024df49480ed499aae8fb754067f
> 
> Unlikely. Indeed, when I was checking this issue some time go, I found that
> not only was there no completion interrupt but also no completion when I
> manually examine the completion ring buffer read and write pointers.
> 
> Here's where I discuss this issue earlier a bit:
> https://lore.kernel.org/linux-scsi/PH0PR11MB511238B8FF7B44C375DDDFADEC519@PH0PR11MB5112.namprd11.prod.outlook.com/
> 

Hello John,

For the record, I tested the pm80xx driver on a HoneyComb LX2 board
(an arm64 board using ACPI).

I tried v6.1-rc1 both with and without your series in $subject.

I couldn't see any issues.


What I tried:
-Running fio:
fio --name=test --filename=/dev/sdc --ioengine=io_uring --rw=randrw --direct=1 --iodepth=32 --bs=1M
on three different HDDs simultaneously for 15+ minutes,
without any errors in fio or dmesg.

-Creating and mounting a btrfs volume, doing a huge dd to the filesystem
without issues.

-sg_sat_read_gplog -d --log=0x10 /dev/sda
which successfully returned the log.


It is worth mentioning that this arm64 board has reserved memory regions,
but does not yet have a firmware that supplies a IORT RMR (reserved memory
regions) revision E.d node, which means that in order to get this board to
boot successfully, we need to supply:
"arm-smmu.disable_bypass=0 iommu.passthrough=1"
on the kernel command line.

It could be worth trying the same on your arm64 machine, to see that also
makes the pm80xx driver play nice for you.


Kind regards,
Niklas

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

Hi Niklas,

> 
> For the record, I tested the pm80xx driver on a HoneyComb LX2 board
> (an arm64 board using ACPI).
> 
> I tried v6.1-rc1 both with and without your series in $subject.
> 
> I couldn't see any issues.

ok, thanks for the effort.

> 
> 
> What I tried:
> -Running fio:
> fio --name=test --filename=/dev/sdc --ioengine=io_uring --rw=randrw --direct=1 --iodepth=32 --bs=1M
> on three different HDDs simultaneously for 15+ minutes,
> without any errors in fio or dmesg.
> 
> -Creating and mounting a btrfs volume, doing a huge dd to the filesystem
> without issues.
> 
> -sg_sat_read_gplog -d --log=0x10 /dev/sda
> which successfully returned the log.
> 
> 
> It is worth mentioning that this arm64 board has reserved memory regions,
> but does not yet have a firmware that supplies a IORT RMR (reserved memory
> regions) revision E.d node, which means that in order to get this board to
> boot successfully, we need to supply:
> "arm-smmu.disable_bypass=0 iommu.passthrough=1"
> on the kernel command line.

hmmm... that's interesting. I can try again with the IOMMU turned off, 
but, as I recall, it did not make a difference before. I think that 
requiring reserved memory regions would totally bust the driver (if not 
present) with IOMMU enabled. As I recall, sas 3008 card would not work 
without RMR for us.

It's also interesting that this LX2 board has A72 cores. For my system, 
we have newer custom arm v8 cores with quite weak memory ordering 
implementation. With that same system, I have detected a couple of other 
driver memory ordering bugs which we did not see on our A72-based platforms.

I always suspected that this issue was a memory ordering issue, but 
since the hang so reliably occurs I ruled it out. Maybe it is...

thanks,
John

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[Niklas Cassel]

On Mon, Oct 24, 2022 at 01:44:56PM +0100, John Garry wrote:
> Hi Niklas,
> 
> > 
> > For the record, I tested the pm80xx driver on a HoneyComb LX2 board
> > (an arm64 board using ACPI).
> > 
> > I tried v6.1-rc1 both with and without your series in $subject.
> > 
> > I couldn't see any issues.
> 
> ok, thanks for the effort.
> 
> > 
> > 
> > What I tried:
> > -Running fio:
> > fio --name=test --filename=/dev/sdc --ioengine=io_uring --rw=randrw --direct=1 --iodepth=32 --bs=1M
> > on three different HDDs simultaneously for 15+ minutes,
> > without any errors in fio or dmesg.
> > 
> > -Creating and mounting a btrfs volume, doing a huge dd to the filesystem
> > without issues.
> > 
> > -sg_sat_read_gplog -d --log=0x10 /dev/sda
> > which successfully returned the log.
> > 
> > 
> > It is worth mentioning that this arm64 board has reserved memory regions,
> > but does not yet have a firmware that supplies a IORT RMR (reserved memory
> > regions) revision E.d node, which means that in order to get this board to
> > boot successfully, we need to supply:
> > "arm-smmu.disable_bypass=0 iommu.passthrough=1"
> > on the kernel command line.
> 
> hmmm... that's interesting. I can try again with the IOMMU turned off, but,
> as I recall, it did not make a difference before. I think that requiring
> reserved memory regions would totally bust the driver (if not present) with
> IOMMU enabled. As I recall, sas 3008 card would not work without RMR for us.

At least on the HoneyComb LX2,
running with "arm-smmu.disable_bypass=0 iommu.passthrough=1" gives a working
system (and working pm80xx).

The ACPI IOMMU code that parses the ACPI IORT RMR revision E.d node
was first included in kernel v6.0:
https://lore.kernel.org/linux-iommu/20220615101044.1972-1-shameerali.kolothum.thodi@huawei.com/

However, the HoneyComb edk2-platforms code has not yet been updated to add
a ACPI IORT RMR revision E.d node.

Considering that it works with "arm-smmu.disable_bypass=0 iommu.passthrough=1",
I assume that the ACPI IORT RMR node basically just defines a number of
memory regions which the IOMMU should treat as "bypass", while all other
memory has to be re-mapped via the IOMMU as per usual.


Kind regards,
Niklas

Re: [PATCH v5 0/7] libsas and drivers: NCQ error handling

[John Garry]

On 24/10/2022 14:10, Niklas Cassel wrote:
> At least on the HoneyComb LX2,
> running with "arm-smmu.disable_bypass=0 iommu.passthrough=1" gives a working
> system (and working pm80xx).
> 
> The ACPI IOMMU code that parses the ACPI IORT RMR revision E.d node
> was first included in kernel v6.0:
> https://lore.kernel.org/linux-iommu/20220615101044.1972-1-shameerali.kolothum.thodi@huawei.com/
> 
> However, the HoneyComb edk2-platforms code has not yet been updated to add
> a ACPI IORT RMR revision E.d node.
> 
> Considering that it works with "arm-smmu.disable_bypass=0 iommu.passthrough=1",
> I assume that the ACPI IORT RMR node basically just defines a number of
> memory regions which the IOMMU should treat as "bypass", while all other
> memory has to be re-mapped via the IOMMU as per usual.

Hi Niklas,

As I expected, unfortunately that did not help. Note that I actually 
can't use passthrough on my platform due to SMMUv3 implementation bug, 
so I just disable SMMUv3 entirely via kernel config.

I'm still betting on a memory ordering issue for me.

Thanks again,
John

Re: [PATCH v5 5/7] scsi: pm8001: Modify task abort handling for SATA task

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 14323 bytes --]

BCC: lkp(a)intel.com
CC: kbuild-all(a)lists.01.org
In-Reply-To: <1664262298-239952-6-git-send-email-john.garry@huawei.com>
References: <1664262298-239952-6-git-send-email-john.garry@huawei.com>
TO: John Garry <john.garry@huawei.com>
TO: jejb(a)linux.ibm.com
TO: martin.petersen(a)oracle.com
TO: jinpu.wang(a)cloud.ionos.com
TO: damien.lemoal(a)opensource.wdc.com
CC: linux-scsi(a)vger.kernel.org
CC: linux-kernel(a)vger.kernel.org
CC: linuxarm(a)huawei.com
CC: yangxingui(a)huawei.com
CC: yanaijie(a)huawei.com
CC: John Garry <john.garry@huawei.com>

Hi John,

I love your patch! Perhaps something to improve:

[auto build test WARNING on mkp-scsi/for-next]
[also build test WARNING on jejb-scsi/for-next linus/master v6.0-rc7 next-20220930]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/John-Garry/libsas-and-drivers-NCQ-error-handling/20220927-151329
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git for-next
:::::: branch date: 5 days ago
:::::: commit date: 5 days ago
config: parisc-randconfig-m031-20220925
compiler: hppa64-linux-gcc (GCC) 12.1.0

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

smatch warnings:
drivers/scsi/pm8001/pm8001_sas.c:996 pm8001_abort_task() warn: variable dereferenced before check 'task' (see line 986)

vim +/task +996 drivers/scsi/pm8001/pm8001_sas.c

dbf9bfe615717d jack wang    2009-10-14   982  
32877947b7a806 Weitao Hou   2019-05-20   983  /*  mandatory SAM-3, still need free task/ccb info, abort the specified task */
dbf9bfe615717d jack wang    2009-10-14   984  int pm8001_abort_task(struct sas_task *task)
dbf9bfe615717d jack wang    2009-10-14   985  {
ebc32f49ada5f9 John Garry   2022-09-27  @986  	struct pm8001_ccb_info *ccb = task->lldd_task;
dbf9bfe615717d jack wang    2009-10-14   987  	unsigned long flags;
1db49906d8fa87 Viswas G     2017-10-18   988  	u32 tag;
dbf9bfe615717d jack wang    2009-10-14   989  	struct domain_device *dev ;
1db49906d8fa87 Viswas G     2017-10-18   990  	struct pm8001_hba_info *pm8001_ha;
dbf9bfe615717d jack wang    2009-10-14   991  	struct pm8001_device *pm8001_dev;
869ddbdcae3b4f Viswas G     2017-10-18   992  	int rc = TMF_RESP_FUNC_FAILED, ret;
ee05cb71f9f7eb Ajish Koshy  2021-12-28   993  	u32 phy_id, port_id;
869ddbdcae3b4f Viswas G     2017-10-18   994  	struct sas_task_slow slow_task;
a961ea0afd632c akshatzen    2021-01-09   995  
dbf9bfe615717d jack wang    2009-10-14  @996  	if (unlikely(!task || !task->lldd_task || !task->dev))
1db49906d8fa87 Viswas G     2017-10-18   997  		return TMF_RESP_FUNC_FAILED;
a961ea0afd632c akshatzen    2021-01-09   998  
1db49906d8fa87 Viswas G     2017-10-18   999  	dev = task->dev;
1db49906d8fa87 Viswas G     2017-10-18  1000  	pm8001_dev = dev->lldd_dev;
1db49906d8fa87 Viswas G     2017-10-18  1001  	pm8001_ha = pm8001_find_ha_by_dev(dev);
869ddbdcae3b4f Viswas G     2017-10-18  1002  	phy_id = pm8001_dev->attached_phy;
a961ea0afd632c akshatzen    2021-01-09  1003  
a961ea0afd632c akshatzen    2021-01-09  1004  	if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
a961ea0afd632c akshatzen    2021-01-09  1005  		// If the controller is seeing fatal errors
a961ea0afd632c akshatzen    2021-01-09  1006  		// abort task will not get a response from the controller
a961ea0afd632c akshatzen    2021-01-09  1007  		return TMF_RESP_FUNC_FAILED;
a961ea0afd632c akshatzen    2021-01-09  1008  	}
a961ea0afd632c akshatzen    2021-01-09  1009  
51c1c5f6ed64c2 peter chang  2019-11-14  1010  	ret = pm8001_find_tag(task, &tag);
51c1c5f6ed64c2 peter chang  2019-11-14  1011  	if (ret == 0) {
2ce6e200a04c24 Joe Perches  2020-11-23  1012  		pm8001_info(pm8001_ha, "no tag for task:%p\n", task);
1db49906d8fa87 Viswas G     2017-10-18  1013  		return TMF_RESP_FUNC_FAILED;
1db49906d8fa87 Viswas G     2017-10-18  1014  	}
dbf9bfe615717d jack wang    2009-10-14  1015  	spin_lock_irqsave(&task->task_state_lock, flags);
dbf9bfe615717d jack wang    2009-10-14  1016  	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
dbf9bfe615717d jack wang    2009-10-14  1017  		spin_unlock_irqrestore(&task->task_state_lock, flags);
1db49906d8fa87 Viswas G     2017-10-18  1018  		return TMF_RESP_FUNC_COMPLETE;
dbf9bfe615717d jack wang    2009-10-14  1019  	}
869ddbdcae3b4f Viswas G     2017-10-18  1020  	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
869ddbdcae3b4f Viswas G     2017-10-18  1021  	if (task->slow_task == NULL) {
869ddbdcae3b4f Viswas G     2017-10-18  1022  		init_completion(&slow_task.completion);
869ddbdcae3b4f Viswas G     2017-10-18  1023  		task->slow_task = &slow_task;
dbf9bfe615717d jack wang    2009-10-14  1024  	}
dbf9bfe615717d jack wang    2009-10-14  1025  	spin_unlock_irqrestore(&task->task_state_lock, flags);
dbf9bfe615717d jack wang    2009-10-14  1026  	if (task->task_proto & SAS_PROTOCOL_SSP) {
4fea759edfa795 John Garry   2022-02-17  1027  		rc = sas_abort_task(task, tag);
2cbbf489778eb9 John Garry   2022-03-11  1028  		sas_execute_internal_abort_single(dev, tag, 0, NULL);
dbf9bfe615717d jack wang    2009-10-14  1029  	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
dbf9bfe615717d jack wang    2009-10-14  1030  		task->task_proto & SAS_PROTOCOL_STP) {
869ddbdcae3b4f Viswas G     2017-10-18  1031  		if (pm8001_ha->chip_id == chip_8006) {
869ddbdcae3b4f Viswas G     2017-10-18  1032  			DECLARE_COMPLETION_ONSTACK(completion_reset);
869ddbdcae3b4f Viswas G     2017-10-18  1033  			DECLARE_COMPLETION_ONSTACK(completion);
869ddbdcae3b4f Viswas G     2017-10-18  1034  			struct pm8001_phy *phy = pm8001_ha->phy + phy_id;
ee05cb71f9f7eb Ajish Koshy  2021-12-28  1035  			port_id = phy->port->port_id;
869ddbdcae3b4f Viswas G     2017-10-18  1036  
869ddbdcae3b4f Viswas G     2017-10-18  1037  			/* 1. Set Device state as Recovery */
869ddbdcae3b4f Viswas G     2017-10-18  1038  			pm8001_dev->setds_completion = &completion;
869ddbdcae3b4f Viswas G     2017-10-18  1039  			PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
9ec3d4c1056533 Igor Pylypiv 2021-03-04  1040  				pm8001_dev, DS_IN_RECOVERY);
869ddbdcae3b4f Viswas G     2017-10-18  1041  			wait_for_completion(&completion);
869ddbdcae3b4f Viswas G     2017-10-18  1042  
869ddbdcae3b4f Viswas G     2017-10-18  1043  			/* 2. Send Phy Control Hard Reset */
869ddbdcae3b4f Viswas G     2017-10-18  1044  			reinit_completion(&completion);
51c1c5f6ed64c2 peter chang  2019-11-14  1045  			phy->port_reset_status = PORT_RESET_TMO;
869ddbdcae3b4f Viswas G     2017-10-18  1046  			phy->reset_success = false;
869ddbdcae3b4f Viswas G     2017-10-18  1047  			phy->enable_completion = &completion;
869ddbdcae3b4f Viswas G     2017-10-18  1048  			phy->reset_completion = &completion_reset;
869ddbdcae3b4f Viswas G     2017-10-18  1049  			ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
869ddbdcae3b4f Viswas G     2017-10-18  1050  				PHY_HARD_RESET);
51c1c5f6ed64c2 peter chang  2019-11-14  1051  			if (ret) {
51c1c5f6ed64c2 peter chang  2019-11-14  1052  				phy->enable_completion = NULL;
51c1c5f6ed64c2 peter chang  2019-11-14  1053  				phy->reset_completion = NULL;
869ddbdcae3b4f Viswas G     2017-10-18  1054  				goto out;
51c1c5f6ed64c2 peter chang  2019-11-14  1055  			}
51c1c5f6ed64c2 peter chang  2019-11-14  1056  
51c1c5f6ed64c2 peter chang  2019-11-14  1057  			/* In the case of the reset timeout/fail we still
51c1c5f6ed64c2 peter chang  2019-11-14  1058  			 * abort the command at the firmware. The assumption
51c1c5f6ed64c2 peter chang  2019-11-14  1059  			 * here is that the drive is off doing something so
51c1c5f6ed64c2 peter chang  2019-11-14  1060  			 * that it's not processing requests, and we want to
51c1c5f6ed64c2 peter chang  2019-11-14  1061  			 * avoid getting a completion for this and either
51c1c5f6ed64c2 peter chang  2019-11-14  1062  			 * leaking the task in libsas or losing the race and
51c1c5f6ed64c2 peter chang  2019-11-14  1063  			 * getting a double free.
51c1c5f6ed64c2 peter chang  2019-11-14  1064  			 */
1b5d2793283dcb Joe Perches  2020-11-20  1065  			pm8001_dbg(pm8001_ha, MSG,
1b5d2793283dcb Joe Perches  2020-11-20  1066  				   "Waiting for local phy ctl\n");
51c1c5f6ed64c2 peter chang  2019-11-14  1067  			ret = wait_for_completion_timeout(&completion,
51c1c5f6ed64c2 peter chang  2019-11-14  1068  					PM8001_TASK_TIMEOUT * HZ);
51c1c5f6ed64c2 peter chang  2019-11-14  1069  			if (!ret || !phy->reset_success) {
51c1c5f6ed64c2 peter chang  2019-11-14  1070  				phy->enable_completion = NULL;
51c1c5f6ed64c2 peter chang  2019-11-14  1071  				phy->reset_completion = NULL;
51c1c5f6ed64c2 peter chang  2019-11-14  1072  			} else {
51c1c5f6ed64c2 peter chang  2019-11-14  1073  				/* 3. Wait for Port Reset complete or
51c1c5f6ed64c2 peter chang  2019-11-14  1074  				 * Port reset TMO
51c1c5f6ed64c2 peter chang  2019-11-14  1075  				 */
1b5d2793283dcb Joe Perches  2020-11-20  1076  				pm8001_dbg(pm8001_ha, MSG,
1b5d2793283dcb Joe Perches  2020-11-20  1077  					   "Waiting for Port reset\n");
51c1c5f6ed64c2 peter chang  2019-11-14  1078  				ret = wait_for_completion_timeout(
51c1c5f6ed64c2 peter chang  2019-11-14  1079  					&completion_reset,
51c1c5f6ed64c2 peter chang  2019-11-14  1080  					PM8001_TASK_TIMEOUT * HZ);
51c1c5f6ed64c2 peter chang  2019-11-14  1081  				if (!ret)
51c1c5f6ed64c2 peter chang  2019-11-14  1082  					phy->reset_completion = NULL;
51c1c5f6ed64c2 peter chang  2019-11-14  1083  				WARN_ON(phy->port_reset_status ==
51c1c5f6ed64c2 peter chang  2019-11-14  1084  						PORT_RESET_TMO);
51c1c5f6ed64c2 peter chang  2019-11-14  1085  				if (phy->port_reset_status == PORT_RESET_TMO) {
196ba6629cf95e Deepak Ukey  2019-07-09  1086  					pm8001_dev_gone_notify(dev);
ee05cb71f9f7eb Ajish Koshy  2021-12-28  1087  					PM8001_CHIP_DISP->hw_event_ack_req(
ee05cb71f9f7eb Ajish Koshy  2021-12-28  1088  						pm8001_ha, 0,
ee05cb71f9f7eb Ajish Koshy  2021-12-28  1089  						0x07, /*HW_EVENT_PHY_DOWN ack*/
ee05cb71f9f7eb Ajish Koshy  2021-12-28  1090  						port_id, phy_id, 0, 0);
869ddbdcae3b4f Viswas G     2017-10-18  1091  					goto out;
196ba6629cf95e Deepak Ukey  2019-07-09  1092  				}
51c1c5f6ed64c2 peter chang  2019-11-14  1093  			}
869ddbdcae3b4f Viswas G     2017-10-18  1094  
869ddbdcae3b4f Viswas G     2017-10-18  1095  			/*
869ddbdcae3b4f Viswas G     2017-10-18  1096  			 * 4. SATA Abort ALL
869ddbdcae3b4f Viswas G     2017-10-18  1097  			 * we wait for the task to be aborted so that the task
869ddbdcae3b4f Viswas G     2017-10-18  1098  			 * is removed from the ccb. on success the caller is
869ddbdcae3b4f Viswas G     2017-10-18  1099  			 * going to free the task.
869ddbdcae3b4f Viswas G     2017-10-18  1100  			 */
2cbbf489778eb9 John Garry   2022-03-11  1101  			ret = sas_execute_internal_abort_dev(dev, 0, NULL);
869ddbdcae3b4f Viswas G     2017-10-18  1102  			if (ret)
869ddbdcae3b4f Viswas G     2017-10-18  1103  				goto out;
869ddbdcae3b4f Viswas G     2017-10-18  1104  			ret = wait_for_completion_timeout(
869ddbdcae3b4f Viswas G     2017-10-18  1105  				&task->slow_task->completion,
869ddbdcae3b4f Viswas G     2017-10-18  1106  				PM8001_TASK_TIMEOUT * HZ);
869ddbdcae3b4f Viswas G     2017-10-18  1107  			if (!ret)
869ddbdcae3b4f Viswas G     2017-10-18  1108  				goto out;
869ddbdcae3b4f Viswas G     2017-10-18  1109  
869ddbdcae3b4f Viswas G     2017-10-18  1110  			/* 5. Set Device State as Operational */
869ddbdcae3b4f Viswas G     2017-10-18  1111  			reinit_completion(&completion);
869ddbdcae3b4f Viswas G     2017-10-18  1112  			pm8001_dev->setds_completion = &completion;
869ddbdcae3b4f Viswas G     2017-10-18  1113  			PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
9ec3d4c1056533 Igor Pylypiv 2021-03-04  1114  				pm8001_dev, DS_OPERATIONAL);
869ddbdcae3b4f Viswas G     2017-10-18  1115  			wait_for_completion(&completion);
869ddbdcae3b4f Viswas G     2017-10-18  1116  		} else {
ebc32f49ada5f9 John Garry   2022-09-27  1117  			/*
ebc32f49ada5f9 John Garry   2022-09-27  1118  			 * Ensure that if we see a completion for the ccb
ebc32f49ada5f9 John Garry   2022-09-27  1119  			 * associated with the task which we are trying to
ebc32f49ada5f9 John Garry   2022-09-27  1120  			 * abort then we should not touch the sas_task as it
ebc32f49ada5f9 John Garry   2022-09-27  1121  			 * may race with libsas freeing it when return here.
ebc32f49ada5f9 John Garry   2022-09-27  1122  			 */
ebc32f49ada5f9 John Garry   2022-09-27  1123  			ccb->task = NULL;
2cbbf489778eb9 John Garry   2022-03-11  1124  			ret = sas_execute_internal_abort_single(dev, tag, 0, NULL);
dbf9bfe615717d jack wang    2009-10-14  1125  		}
869ddbdcae3b4f Viswas G     2017-10-18  1126  		rc = TMF_RESP_FUNC_COMPLETE;
dbf9bfe615717d jack wang    2009-10-14  1127  	} else if (task->task_proto & SAS_PROTOCOL_SMP) {
dbf9bfe615717d jack wang    2009-10-14  1128  		/* SMP */
2cbbf489778eb9 John Garry   2022-03-11  1129  		rc = sas_execute_internal_abort_single(dev, tag, 0, NULL);
dbf9bfe615717d jack wang    2009-10-14  1130  
dbf9bfe615717d jack wang    2009-10-14  1131  	}
dbf9bfe615717d jack wang    2009-10-14  1132  out:
869ddbdcae3b4f Viswas G     2017-10-18  1133  	spin_lock_irqsave(&task->task_state_lock, flags);
869ddbdcae3b4f Viswas G     2017-10-18  1134  	if (task->slow_task == &slow_task)
869ddbdcae3b4f Viswas G     2017-10-18  1135  		task->slow_task = NULL;
869ddbdcae3b4f Viswas G     2017-10-18  1136  	spin_unlock_irqrestore(&task->task_state_lock, flags);
dbf9bfe615717d jack wang    2009-10-14  1137  	if (rc != TMF_RESP_FUNC_COMPLETE)
2ce6e200a04c24 Joe Perches  2020-11-23  1138  		pm8001_info(pm8001_ha, "rc= %d\n", rc);
dbf9bfe615717d jack wang    2009-10-14  1139  	return rc;
dbf9bfe615717d jack wang    2009-10-14  1140  }
dbf9bfe615717d jack wang    2009-10-14  1141  

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config.ksh --]
[-- Type: text/plain, Size: 128333 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/parisc64 6.0.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="hppa64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_LEGACY_TIMER_TICK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
CONFIG_BPF=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
# CONFIG_RD_ZSTD is not set
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_MEMBARRIER is not set
# CONFIG_KALLSYMS is not set
CONFIG_KCMP=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
# end of General setup

CONFIG_PARISC=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_LOW_RES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_PGTABLE_LEVELS=3

#
# Processor type and features
#
# CONFIG_PA7000 is not set
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
# CONFIG_PA7300LC is not set
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
CONFIG_PARISC_HUGE_KERNEL=y
CONFIG_MLONGCALLS=y
CONFIG_64BIT=y
CONFIG_PARISC_PAGE_SIZE_4KB=y
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_IRQSTACKS=y
# CONFIG_TLB_PTLOCK is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_COMPAT=y
CONFIG_AUDIT_ARCH=y
CONFIG_NR_CPUS=4
# CONFIG_KEXEC is not set
CONFIG_KEXEC_FILE=y
# end of Processor type and features

#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
CONFIG_GSC=y
# CONFIG_HPPB is not set
CONFIG_IOMMU_CCIO=y
# CONFIG_GSC_LASI is not set
CONFIG_GSC_WAX=y
# CONFIG_GSC_DINO is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
# end of Bus options (PCI, PCMCIA, EISA, GSC, ISA)

#
# PA-RISC specific drivers
#
CONFIG_SUPERIO=y
# CONFIG_CHASSIS_LCD_LED is not set
# CONFIG_PDC_CHASSIS is not set
CONFIG_PDC_STABLE=m
# end of PA-RISC specific drivers

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_ELF=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_DESCRIPTORS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_HASH=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_NO_EFFICIENT_FFS=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
# CONFIG_LOCK_EVENT_COUNTS is not set

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS_NONE is not set
CONFIG_MODULE_COMPRESS_GZIP=y
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_DECOMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="842"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=m
# CONFIG_ZSMALLOC_STAT is not set

#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_STACK_MAX_DEFAULT_SIZE_MB=100
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_GET_FREE_REGION=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_USERFAULTFD=y

#
# Data Access Monitoring
#
CONFIG_DAMON=y
# CONFIG_DAMON_VADDR is not set
# CONFIG_DAMON_PADDR is not set
# CONFIG_DAMON_SYSFS is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XDP_SOCKETS is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
# CONFIG_BRIDGE_MRP is not set
CONFIG_BRIDGE_CFM=y
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
# CONFIG_IPDDP_ENCAP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=y
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_QRTR=m
# CONFIG_QRTR_SMD is not set
CONFIG_QRTR_TUN=m
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
# CONFIG_CAN_GW is not set
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HS is not set
CONFIG_BT_LE=y
CONFIG_BT_LEDS=y
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
# CONFIG_BT_SELFTEST_ECDH is not set
# CONFIG_BT_SELFTEST_SMP is not set
# CONFIG_BT_FEATURE_DEBUG is not set

#
# Bluetooth device drivers
#
CONFIG_BT_MTK=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_MTKSDIO=m
# CONFIG_BT_QCOMSMD is not set
CONFIG_BT_VIRTIO=m
# end of Bluetooth device drivers

CONFIG_MCTP=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_CRDA_SUPPORT is not set
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=m
# CONFIG_CAIF_USB is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_I2C=y
# end of Near Field Communication (NFC) devices

# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=y
# CONFIG_LWTUNNEL is not set
CONFIG_GRO_CELLS=y
# CONFIG_NET_SELFTESTS is not set
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_QUIRKS is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
# CONFIG_PCIE_BUS_DEFAULT is not set
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
CONFIG_PCIE_BUS_PEER2PEER=y
# CONFIG_VGA_ARB is not set
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_PCIE_RCAR_EP is not set
# CONFIG_PCIE_XILINX_CPM is not set
CONFIG_PCI_VERSATILE=y
# CONFIG_PCIE_ALTERA is not set
CONFIG_PCIE_MT7621=m

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_EP=y
# CONFIG_PCI_KEYSTONE_EP is not set
# CONFIG_PCIE_ARTPEC6_EP is not set
CONFIG_PCIE_TEGRA194=m
CONFIG_PCIE_TEGRA194_EP=m
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
CONFIG_PCI_EPF_TEST=y
# CONFIG_PCI_EPF_NTB is not set
# CONFIG_PCI_EPF_VNTB is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers

CONFIG_CXL_BUS=m
# CONFIG_CXL_PCI is not set
CONFIG_CXL_PORT=m
CONFIG_CXL_REGION=y
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
# CONFIG_RAPIDIO_CHMAN is not set
# CONFIG_RAPIDIO_MPORT_CDEV is not set

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_RAPIDIO_RXS_GEN3=m
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_DEVTMPFS_SAFE=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
CONFIG_BT1_APB=y
# CONFIG_BT1_AXI is not set
# CONFIG_INTEL_IXP4XX_EB is not set
CONFIG_QCOM_EBI2=y
# CONFIG_MHI_BUS is not set
CONFIG_MHI_BUS_EP=m
# end of Bus devices

CONFIG_CONNECTOR=m

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=m
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=m
CONFIG_ARM_SCMI_POWER_CONTROL=m
# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_BCM47XX_NVRAM=y
# CONFIG_BCM47XX_SPROM is not set
CONFIG_GOOGLE_FIRMWARE=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
CONFIG_MTD=y
CONFIG_MTD_TESTS=m

#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_PARSER_IMAGETAG=y
CONFIG_MTD_PARSER_TRX=m
CONFIG_MTD_SHARPSL_PARTS=m
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=y
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
# CONFIG_MTD_SC520CDP is not set
CONFIG_MTD_NETSC520=m
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SPEAR_SMI=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_AMS_DELTA=y
CONFIG_MTD_NAND_SHARPSL=m
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_ATMEL=y
# CONFIG_MTD_NAND_MARVELL is not set
CONFIG_MTD_NAND_SLC_LPC32XX=m
CONFIG_MTD_NAND_MLC_LPC32XX=y
# CONFIG_MTD_NAND_BRCMNAND is not set
CONFIG_MTD_NAND_BCM47XXNFLASH=m
# CONFIG_MTD_NAND_OXNAS is not set
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_VF610_NFC=m
CONFIG_MTD_NAND_SH_FLCTL=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_NAND_TXX9NDFMC=y
CONFIG_MTD_NAND_SUNXI=y
CONFIG_MTD_NAND_HISI504=y
CONFIG_MTD_NAND_QCOM=m
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_TEGRA=m
CONFIG_MTD_NAND_STM32_FMC2=y
# CONFIG_MTD_NAND_MESON is not set
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_NAND_CADENCE is not set
# CONFIG_MTD_NAND_ARASAN is not set
# CONFIG_MTD_NAND_INTEL_LGM is not set
CONFIG_MTD_NAND_RENESAS=m

#
# Misc
#
CONFIG_MTD_SM_COMMON=m
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_RICOH=m
# CONFIG_MTD_NAND_DISKONCHIP is not set

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_UBI is not set
CONFIG_MTD_HYPERBUS=m
CONFIG_HBMC_AM654=m
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_GSC=y
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set

#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_AUTH=y
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=m
# CONFIG_QCOM_COINCELL is not set
CONFIG_QCOM_FASTRPC=m
CONFIG_APDS9802ALS=m
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_PCH_PHUB=m
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_ALTERA_STAPL=y
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=y
# CONFIG_HABANA_AI is not set
CONFIG_UACCE=m
CONFIG_PVPANIC=y
CONFIG_PVPANIC_PCI=y
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_BNX2_ISCSI=m
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_HISI_SAS=m
# CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_SCSI_MYRB=m
CONFIG_SCSI_MYRS=m
# CONFIG_SCSI_SNIC is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
CONFIG_SCSI_IZIP_SLOW_CTR=y
# CONFIG_SCSI_LASI700 is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_ZALON is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_VIRTIO is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=m
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_BRCM=m
CONFIG_AHCI_DA850=m
# CONFIG_AHCI_DM816 is not set
# CONFIG_AHCI_IMX is not set
CONFIG_AHCI_MTK=m
CONFIG_AHCI_MVEBU=m
# CONFIG_AHCI_SUNXI is not set
CONFIG_AHCI_TEGRA=m
CONFIG_AHCI_XGENE=m
CONFIG_SATA_FSL=m
CONFIG_SATA_AHCI_SEATTLE=m
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=m
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_NTB_NETDEV is not set
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=m
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=m
# CONFIG_CAIF_DRIVERS is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ACTIONS is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=y
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_XGENE_V2=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BCM4908_ENET=y
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
# CONFIG_TIGON3 is not set
CONFIG_BNX2X=y
# CONFIG_BNX2X_SRIOV is not set
CONFIG_BGMAC=y
CONFIG_BGMAC_PLATFORM=y
CONFIG_SYSTEMPORT=m
# CONFIG_BNXT is not set
# CONFIG_NET_VENDOR_CADENCE is not set
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
CONFIG_THUNDER_NIC_BGX=y
CONFIG_THUNDER_NIC_RGX=y
CONFIG_CAVIUM_PTP=m
# CONFIG_LIQUIDIO is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_NET_VENDOR_DAVICOM is not set
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
# CONFIG_TULIP_NAPI_HW_MITIGATION is not set
CONFIG_WINBOND_840=m
CONFIG_DM9102=y
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=y
# CONFIG_TSNEP_SELFTESTS is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=y
# CONFIG_FSL_FMAN is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_FSL_ENETC_IERB is not set
CONFIG_FSL_ENETC_MDIO=m
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
# CONFIG_E1000E is not set
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
# CONFIG_IXGBE_HWMON is not set
CONFIG_IXGBE_DCB=y
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
CONFIG_IGC=m
# CONFIG_NET_VENDOR_WANGXUN is not set
CONFIG_JME=y
# CONFIG_KORINA is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=y
CONFIG_MVNETA=y
# CONFIG_MVPP2 is not set
# CONFIG_PXA168_ETH is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
# CONFIG_SKGE_GENESIS is not set
# CONFIG_SKY2 is not set
CONFIG_OCTEONTX2_MBOX=m
CONFIG_OCTEONTX2_AF=m
# CONFIG_NDC_DIS_DYNAMIC_CACHING is not set
# CONFIG_OCTEONTX2_PF is not set
CONFIG_OCTEON_EP=m
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NET_MEDIATEK_SOC_WED=y
CONFIG_NET_MEDIATEK_SOC=m
CONFIG_NET_MEDIATEK_STAR_EMAC=y
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_LAN743X=m
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
# CONFIG_NS83820 is not set
# CONFIG_NET_VENDOR_NETERION is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
CONFIG_AX88796=y
# CONFIG_AX88796_93CX6 is not set
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
# CONFIG_LPC_ENET is not set
# CONFIG_NET_VENDOR_OKI is not set
CONFIG_ETHOC=y
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
CONFIG_QLCNIC=y
# CONFIG_QLCNIC_SRIOV is not set
# CONFIG_QLCNIC_DCB is not set
# CONFIG_QLCNIC_HWMON is not set
CONFIG_NETXEN_NIC=y
CONFIG_QED=m
CONFIG_QED_LL2=y
# CONFIG_QED_SRIOV is not set
CONFIG_QEDE=m
CONFIG_QED_ISCSI=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
CONFIG_SIS190=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
# CONFIG_SFC_SRIOV is not set
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=m
# CONFIG_SFC_FALCON_MTD is not set
CONFIG_SFC_SIENA=y
# CONFIG_SFC_SIENA_MTD is not set
# CONFIG_SFC_SIENA_MCDI_MON is not set
CONFIG_SFC_SIENA_SRIOV=y
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
CONFIG_EPIC100=m
CONFIG_SMC911X=y
CONFIG_SMSC911X=m
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SUNPLUS=y
CONFIG_SP7021_EMAC=y
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
CONFIG_WIZNET_BUS_INDIRECT=y
# CONFIG_WIZNET_BUS_ANY is not set
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=m
# CONFIG_XILINX_AXI_EMAC is not set
CONFIG_XILINX_LL_TEMAC=m
CONFIG_FDDI=m
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=y

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
CONFIG_MESON_GXL_PHY=y
CONFIG_ADIN_PHY=m
CONFIG_ADIN1100_PHY=y
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
CONFIG_BCM63XX_PHY=y
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM84881_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=y
# CONFIG_CICADA_PHY is not set
CONFIG_CORTINA_PHY=m
# CONFIG_DAVICOM_PHY is not set
CONFIG_ICPLUS_PHY=m
# CONFIG_LXT_PHY is not set
CONFIG_INTEL_XWAY_PHY=m
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
CONFIG_MAXLINEAR_GPHY=m
# CONFIG_MEDIATEK_GE_PHY is not set
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
CONFIG_MICROSEMI_PHY=m
CONFIG_MOTORCOMM_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_NXP_C45_TJA11XX_PHY=y
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_AT803X_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
CONFIG_ROCKCHIP_PHY=y
# CONFIG_SMSC_PHY is not set
CONFIG_STE10XP=y
# CONFIG_TERANETICS_PHY is not set
CONFIG_DP83822_PHY=y
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=m
CONFIG_DP83869_PHY=y
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
# CONFIG_CAN_NETLINK is not set
CONFIG_CAN_DEBUG_DEVICES=y

#
# MCTP Device Drivers
#
# CONFIG_MCTP_SERIAL is not set
# CONFIG_MCTP_TRANSPORT_I2C is not set
# end of MCTP Device Drivers

CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_SUN4I is not set
CONFIG_MDIO_XGENE=m
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_CAVIUM=y
# CONFIG_MDIO_GPIO is not set
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_MOXART=m
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_THUNDER=y

#
# MDIO Multiplexers
#

#
# PCS device drivers
#
# end of PCS device drivers

CONFIG_PLIP=m
# CONFIG_PPP is not set
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_WLAN_VENDOR_INTEL is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76x02_LIB=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0E=m
# CONFIG_MT76x2E is not set
CONFIG_MT7603E=m
CONFIG_MT7615_COMMON=m
CONFIG_MT7615E=m
# CONFIG_MT7622_WMAC is not set
# CONFIG_MT7663S is not set
# CONFIG_MT7915E is not set
CONFIG_MT7921_COMMON=m
CONFIG_MT7921E=m
# CONFIG_MT7921S is not set
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
# CONFIG_WLAN_VENDOR_PURELIFI is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
CONFIG_RTL8188EE=m
# CONFIG_RTL8192EE is not set
CONFIG_RTL8821AE=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_RTLBTCOEXIST=m
# CONFIG_RTW88 is not set
CONFIG_RTW89=m
CONFIG_RTW89_CORE=m
CONFIG_RTW89_PCI=m
CONFIG_RTW89_8852A=m
CONFIG_RTW89_8852C=m
CONFIG_RTW89_8852AE=m
CONFIG_RTW89_8852CE=m
CONFIG_RTW89_DEBUG=y
CONFIG_RTW89_DEBUGMSG=y
# CONFIG_RTW89_DEBUGFS is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_SILABS is not set
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=m
CONFIG_QTNFMAC_PCIE=m
CONFIG_MAC80211_HWSIM=m
CONFIG_VIRT_WIFI=m
CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
# CONFIG_HDLC_FR is not set
# CONFIG_HDLC_PPP is not set

#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_HWSIM=m

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_GSCPS2=m
CONFIG_HP_SDC=m
CONFIG_HIL_MLC=m
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_OLPC_APSP=y
# CONFIG_SERIO_SUN4I_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=m
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_ATMEL=y
# CONFIG_SERIAL_ATMEL_CONSOLE is not set
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_CLPS711X=m
CONFIG_SERIAL_SAMSUNG=m
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
# CONFIG_SERIAL_TEGRA is not set
CONFIG_SERIAL_IMX=m
# CONFIG_SERIAL_IMX_CONSOLE is not set
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_MUX is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_SERIAL_SH_SCI_EARLYCON is not set
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_MSM=y
# CONFIG_SERIAL_MSM_CONSOLE is not set
CONFIG_SERIAL_VT8500=y
# CONFIG_SERIAL_VT8500_CONSOLE is not set
CONFIG_SERIAL_OMAP=m
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=m
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_TIMBERDALE=m
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_PCH_UART=m
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_MPS2_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
CONFIG_SERIAL_ST_ASC=y
# CONFIG_SERIAL_ST_ASC_CONSOLE is not set
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_SPRD=m
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_OWL=m
# CONFIG_SERIAL_RDA is not set
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=y
# CONFIG_N_GSM is not set
CONFIG_NOZOMI=m
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
# CONFIG_RPMSG_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_IPMI_KCS_BMC=m
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
CONFIG_NPCM7XX_KCS_IPMI_BMC=m
# CONFIG_IPMI_KCS_BMC_CDEV_IPMI is not set
CONFIG_IPMI_KCS_BMC_SERIO=m
CONFIG_ASPEED_BT_IPMI_BMC=m
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=m
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
# CONFIG_HW_RANDOM_OMAP is not set
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_IMX_RNGC=m
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=m
CONFIG_HW_RANDOM_MESON=m
# CONFIG_HW_RANDOM_MTK is not set
CONFIG_HW_RANDOM_EXYNOS=m
# CONFIG_HW_RANDOM_NPCM is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_HW_RANDOM_CN10K is not set
CONFIG_APPLICOM=m
CONFIG_DEVMEM=y
# CONFIG_DEVPORT is not set
# CONFIG_TCG_TPM is not set
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_GPMUX=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_HIX5HD2=y
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NVIDIA_GPU=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ASPEED=y
# CONFIG_I2C_AT91 is not set
CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=m
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=m
# CONFIG_I2C_BRCMSTB is not set
CONFIG_I2C_CADENCE=m
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DAVINCI=m
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EG20T=m
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_HIGHLANDER=m
# CONFIG_I2C_HISI is not set
CONFIG_I2C_IMG=y
# CONFIG_I2C_IMX is not set
CONFIG_I2C_IMX_LPI2C=m
# CONFIG_I2C_IOP3XX is not set
CONFIG_I2C_JZ4780=y
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_MESON=m
CONFIG_I2C_MT65XX=m
CONFIG_I2C_MT7621=m
CONFIG_I2C_MV64XXX=m
CONFIG_I2C_MXS=m
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=y
# CONFIG_I2C_OWL is not set
CONFIG_I2C_APPLE=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=m
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
CONFIG_I2C_QCOM_CCI=y
CONFIG_I2C_QUP=m
CONFIG_I2C_RIIC=y
CONFIG_I2C_RZV2M=y
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SPRD=y
# CONFIG_I2C_ST is not set
CONFIG_I2C_STM32F4=y
# CONFIG_I2C_STM32F7 is not set
CONFIG_I2C_SUN6I_P2WI=m
CONFIG_I2C_SYNQUACER=m
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
CONFIG_I2C_UNIPHIER_F=m
CONFIG_I2C_VERSATILE=m
CONFIG_I2C_WMT=m
CONFIG_I2C_THUNDERX=y
# CONFIG_I2C_XILINX is not set
CONFIG_I2C_XLP9XX=m
CONFIG_I2C_RCAR=m

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=m
CONFIG_MIPI_I3C_HCI=m
# CONFIG_SPI is not set
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
# CONFIG_SPMI_MSM_PMIC_ARB is not set
CONFIG_SPMI_MTK_PMIF=y
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
# CONFIG_PPS_CLIENT_PARPORT is not set
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=m
CONFIG_PTP_1588_CLOCK_QORIQ=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=y
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_SX150X=y

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
# CONFIG_EINT_MTK is not set
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
CONFIG_PINCTRL_SC7280_LPASS_LPI=m
# CONFIG_PINCTRL_SM8250_LPASS_LPI is not set
CONFIG_PINCTRL_LPASS_LPI=m

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
CONFIG_PINCTRL_PFC_R8A7779=y
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
# CONFIG_PINCTRL_PFC_R8A7792 is not set
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
CONFIG_PINCTRL_PFC_R8A7745=y
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
CONFIG_PINCTRL_PFC_R8A774B1=y
# CONFIG_PINCTRL_PFC_SH7203 is not set
CONFIG_PINCTRL_PFC_SH7264=y
CONFIG_PINCTRL_PFC_SH7269=y
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
CONFIG_PINCTRL_PFC_SH7734=y
# CONFIG_PINCTRL_PFC_SH7757 is not set
CONFIG_PINCTRL_PFC_SH7785=y
# CONFIG_PINCTRL_PFC_SH7786 is not set
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_HISI=y
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_MPC8XXX is not set
CONFIG_GPIO_MXC=y
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PXA is not set
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_ROCKCHIP=y
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XGENE_SB=m
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
CONFIG_GPIO_IDT3243X=m
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not set
CONFIG_GPIO_TS4900=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_JANZ_TTL is not set
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_LP3943=y
# CONFIG_GPIO_LP873X is not set
CONFIG_GPIO_MAX77620=m
# CONFIG_GPIO_MAX77650 is not set
CONFIG_GPIO_SL28CPLD=y
# CONFIG_GPIO_TIMBERDALE is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=m
CONFIG_GPIO_MLXBF=m
CONFIG_GPIO_MLXBF2=y
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCH=m
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VIRTIO is not set
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers

CONFIG_W1=m
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=m
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2430=m
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_POWER_SUPPLY_HWMON is not set
# CONFIG_PDA_POWER is not set
# CONFIG_IP5XXX_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_CW2015=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=m
CONFIG_CHARGER_PCF50633=m
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77976=y
# CONFIG_CHARGER_MT6360 is not set
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SC2731 is not set
CONFIG_CHARGER_BD99954=m
CONFIG_BATTERY_ACER_A500=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ARM_SCMI=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_BT1_PVT is not set
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_SPARX5=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LAN966X is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31730=y
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=m
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
CONFIG_SENSORS_FSP_3Y=m
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_DPS920AB=m
CONFIG_SENSORS_INSPUR_IPSPS=m
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
CONFIG_SENSORS_IRPS5401=m
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
# CONFIG_SENSORS_LT7182S is not set
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_MP5023=m
# CONFIG_SENSORS_PIM4328 is not set
CONFIG_SENSORS_PLI1209BC=m
# CONFIG_SENSORS_PLI1209BC_REGULATOR is not set
# CONFIG_SENSORS_PM6764TR is not set
CONFIG_SENSORS_PXE1610=m
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_XDPE152=m
CONFIG_SENSORS_XDPE122=m
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
# CONFIG_SENSORS_SL28CPLD is not set
# CONFIG_SENSORS_SBTSI is not set
CONFIG_SENSORS_SBRMI=y
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=y
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=m
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=m
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=y
# CONFIG_MENF21BMC_WATCHDOG is not set
CONFIG_MENZ069_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_MLX_WDT=y
CONFIG_SL28CPLD_WATCHDOG=m
CONFIG_ARMADA_37XX_WATCHDOG=m
CONFIG_AT91RM9200_WATCHDOG=m
CONFIG_AT91SAM9X_WATCHDOG=m
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=m
CONFIG_FTWDT010_WATCHDOG=m
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=m
CONFIG_EP93XX_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=m
CONFIG_PNX4008_WATCHDOG=m
CONFIG_DAVINCI_WATCHDOG=m
CONFIG_K3_RTI_WATCHDOG=m
# CONFIG_RN5T618_WATCHDOG is not set
CONFIG_SUNXI_WATCHDOG=m
CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=m
CONFIG_STMP3XXX_RTC_WATCHDOG=m
CONFIG_TS72XX_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=y
# CONFIG_MAX77620_WATCHDOG is not set
# CONFIG_IMX2_WDT is not set
CONFIG_IMX7ULP_WDT=m
# CONFIG_RETU_WATCHDOG is not set
CONFIG_MOXART_WDT=m
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
CONFIG_MESON_GXBB_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MEDIATEK_WATCHDOG=m
CONFIG_DIGICOLOR_WATCHDOG=m
CONFIG_LPC18XX_WATCHDOG=y
CONFIG_RENESAS_WDT=y
# CONFIG_RENESAS_RZAWDT is not set
CONFIG_RENESAS_RZN1WDT=y
CONFIG_RENESAS_RZG2LWDT=y
CONFIG_ASPEED_WATCHDOG=y
# CONFIG_REALTEK_OTTO_WDT is not set
CONFIG_SPRD_WATCHDOG=y
# CONFIG_VISCONTI_WATCHDOG is not set
CONFIG_MSC313E_WATCHDOG=m
CONFIG_APPLE_WATCHDOG=m
# CONFIG_SUNPLUS_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_KEMPLD_WDT=m
CONFIG_RDC321X_WDT=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCM_KONA_WDT=m
# CONFIG_BCM_KONA_WDT_DEBUG is not set
CONFIG_BCM7038_WDT=m
CONFIG_IMGPDC_WDT=y
CONFIG_MPC5200_WDT=y
CONFIG_MEN_A21_WDT=m
# CONFIG_UML_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SUN4I_GPADC=m
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_ENE_KB3930=m
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_MXS_LRADC is not set
CONFIG_MFD_MX25_TSADC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX77714=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=m
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=m
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
CONFIG_MFD_TIMBERDALE=m
CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_MFD_STW481X=y
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_WCD934X is not set
CONFIG_MFD_ATC260X=m
CONFIG_MFD_ATC260X_I2C=m
CONFIG_MFD_KHADAS_MCU=y
CONFIG_MFD_ACER_A500_EC=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM8607=m
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_AS3711=y
# CONFIG_REGULATOR_ATC260X is not set
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LM363X=m
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
# CONFIG_REGULATOR_MAX77650 is not set
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8893 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MP886X=y
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6315=m
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6358 is not set
# CONFIG_REGULATOR_MT6359 is not set
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PCF50633=m
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_RPMH=m
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=m
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
CONFIG_REGULATOR_RTMV20=y
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_SC2731=m
CONFIG_REGULATOR_SKY81452=m
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_STM32_BOOSTER=m
# CONFIG_REGULATOR_STM32_VREFBUF is not set
CONFIG_REGULATOR_STM32_PWR=y
# CONFIG_REGULATOR_TI_ABB is not set
CONFIG_REGULATOR_STW481X_VMMC=y
# CONFIG_REGULATOR_SY7636A is not set
# CONFIG_REGULATOR_SY8106A is not set
CONFIG_REGULATOR_SY8824X=m
CONFIG_REGULATOR_SY8827N=m
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TPS68470=m
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=m
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
CONFIG_CEC_MESON_AO=y
# CONFIG_CEC_GPIO is not set
CONFIG_CEC_SAMSUNG_S5P=m
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# end of CEC support

CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types

CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
# end of Video4Linux options

#
# Media controller options
#
# end of Media controller options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SAA7706H=m
# CONFIG_RADIO_SI4713 is not set
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_TEF6862=m
# CONFIG_RADIO_TIMBERDALE is not set
CONFIG_RADIO_WL1273=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
CONFIG_VIDEO_CS53L32A=m
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=m
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV7604=m
# CONFIG_VIDEO_ADV7604_CEC is not set
CONFIG_VIDEO_ADV7842=m
# CONFIG_VIDEO_ADV7842_CEC is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
CONFIG_VIDEO_TVP7002=m
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=m
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_THS8200=m
# end of Video encoders

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_ST_MIPID02=m
CONFIG_VIDEO_THS7303=m
# end of Miscellaneous helper chips

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
CONFIG_MEDIA_TUNER_FC0011=m
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MT2060=m
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_AGP is not set
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=m
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SCHED=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_I2C_NXP_TDA9950=m
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
CONFIG_NOUVEAU_DEBUG_PUSH=y
# CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
# CONFIG_DRM_KMB_DISPLAY is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_ROCKCHIP is not set
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
# CONFIG_DRM_SUN4I is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_MSM is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_V3D is not set
CONFIG_DRM_ETNAVIV=m
# CONFIG_DRM_ETNAVIV_THERMAL is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_LOGICVC is not set
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
CONFIG_DRM_PANFROST=m
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m
CONFIG_DRM_NOMODESET=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CLPS711X=m
CONFIG_FB_IMX=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
CONFIG_FB_CONTROL=y
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_GBE is not set
CONFIG_FB_PVR2=m
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=m
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=m
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_PXA168 is not set
CONFIG_FB_W100=y
# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_TMIO=m
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_S3C is not set
# CONFIG_FB_SM501 is not set
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_GOLDFISH is not set
CONFIG_FB_DA8XX=y
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=y
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=m
CONFIG_BACKLIGHT_LM3533=m
# CONFIG_BACKLIGHT_OMAP1 is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LM3630A=m
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_SKY81452=m
# CONFIG_BACKLIGHT_AS3711 is not set
CONFIG_BACKLIGHT_GPIO=m
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=m
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_LOGO_PARISC_CLUT224 is not set
# end of Graphics support

# CONFIG_SOUND is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=y
CONFIG_MMC_CRYPTO=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_MESON_GX=m
CONFIG_MMC_MOXART=m
# CONFIG_MMC_OMAP_HS is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_DAVINCI=y
# CONFIG_MMC_S3C is not set
CONFIG_MMC_TMIO_CORE=y
# CONFIG_MMC_TMIO is not set
CONFIG_MMC_SDHI=y
CONFIG_MMC_SDHI_SYS_DMAC=y
# CONFIG_MMC_SDHI_INTERNAL_DMAC is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_DW is not set
CONFIG_MMC_SH_MMCIF=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MMC_BCM2835=m
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_OWL is not set
CONFIG_MMC_LITEX=m
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_ARIEL=y
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_MT6323 is not set
CONFIG_LEDS_S3C24XX=y
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_NS2=m
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_MAX77650 is not set
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=m
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_PM8058=m
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=m
CONFIG_LEDS_TI_LMU_COMMON=m
# CONFIG_LEDS_LM36274 is not set
# CONFIG_LEDS_TPS6105X is not set
CONFIG_LEDS_IP30=m
CONFIG_LEDS_ACER_A500=m

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABEOZ9 is not set
CONFIG_RTC_DRV_ABX80X=m
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_ISL12026=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8010=y
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
# CONFIG_RTC_DRV_RV3032 is not set
CONFIG_RTC_DRV_RV8803=m
# CONFIG_RTC_DRV_S5M is not set
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_DS3232_HWMON is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
CONFIG_RTC_DRV_RX6110=m

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_DA9052=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_GAMECUBE=m
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_NTXEC=y

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=m
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=m
# CONFIG_RTC_DRV_S3C is not set
CONFIG_RTC_DRV_EP93XX=y
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=m
CONFIG_RTC_DRV_MV=m
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_LPC32XX=y
# CONFIG_RTC_DRV_PM8XXX is not set
# CONFIG_RTC_DRV_TEGRA is not set
CONFIG_RTC_DRV_MOXART=m
# CONFIG_RTC_DRV_MT2712 is not set
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
# CONFIG_RTC_DRV_XGENE is not set
# CONFIG_RTC_DRV_STM32 is not set
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_TI_K3=y

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_APPLE_ADMAC=m
# CONFIG_AXI_DMAC is not set
# CONFIG_DMA_JZ4780 is not set
CONFIG_DMA_SA11X0=y
# CONFIG_DMA_SUN6I is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_EP93XX_DMA is not set
# CONFIG_IMG_MDC_DMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOP_ADMA is not set
CONFIG_K3_DMA=m
CONFIG_MCF_EDMA=m
CONFIG_MMP_PDMA=y
CONFIG_MMP_TDMA=m
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
CONFIG_NBPFAXI_DMA=m
CONFIG_PCH_DMA=y
CONFIG_PLX_DMA=m
# CONFIG_STM32_DMA is not set
CONFIG_STM32_DMAMUX=y
CONFIG_SPRD_DMA=y
CONFIG_S3C24XX_DMAC=y
# CONFIG_TEGRA186_GPC_DMA is not set
# CONFIG_TEGRA20_APB_DMA is not set
CONFIG_TEGRA210_ADMA=m
CONFIG_TIMB_DMA=y
CONFIG_XGENE_DMA=m
CONFIG_XILINX_ZYNQMP_DMA=m
# CONFIG_MTK_HSDMA is not set
CONFIG_MTK_CQDMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_RZN1_DMAMUX=m
CONFIG_DW_DMAC_PCI=y
CONFIG_SF_PDMA=m
CONFIG_RENESAS_DMA=y
# CONFIG_SH_DMAE_BASE is not set
CONFIG_RCAR_DMAC=m
CONFIG_RENESAS_USB_DMAC=y
# CONFIG_RZ_DMAC is not set
# CONFIG_TI_EDMA is not set
CONFIG_DMA_OMAP=m
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=y
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO=y
CONFIG_VFIO_VIRQFD=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI is not set
CONFIG_VFIO_PLATFORM=y
# CONFIG_VFIO_AMBA is not set
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set
# CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET is not set
CONFIG_VFIO_MDEV=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=m
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_RTLLIB is not set
CONFIG_RTL8723BS=m
# CONFIG_RTS5208 is not set
CONFIG_OCTEON_ETHERNET=y
CONFIG_VT6655=m
CONFIG_FB_SM750=y
# CONFIG_STAGING_MEDIA is not set
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_KS7010=y
CONFIG_GREYBUS_BOOTROM=m
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
# CONFIG_GREYBUS_LOOPBACK is not set
# CONFIG_GREYBUS_POWER is not set
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
# CONFIG_GREYBUS_BRIDGED_PHY is not set
# CONFIG_GREYBUS_ARCHE is not set
# CONFIG_FIELDBUS_DEV is not set
CONFIG_QLGE=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
# CONFIG_VME_TSI148 is not set
CONFIG_VME_FAKE=y

#
# VME Device Drivers
#
CONFIG_VME_USER=y
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
CONFIG_NVSW_SN2201=y
CONFIG_OLPC_XO175=y
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
CONFIG_CLK_SP810=y
# end of Clock driver for ARM Reference designs

# CONFIG_CLK_HSDK is not set
CONFIG_COMMON_CLK_APPLE_NCO=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=m
# CONFIG_COMMON_CLK_HI655X is not set
CONFIG_COMMON_CLK_SCMI=m
CONFIG_COMMON_CLK_SCPI=m
CONFIG_COMMON_CLK_SI5341=m
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
CONFIG_COMMON_CLK_FSL_SAI=y
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_ASPEED is not set
CONFIG_COMMON_CLK_S2MPS11=m
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_PWM=m
CONFIG_COMMON_CLK_OXNAS=y
CONFIG_COMMON_CLK_MMP2_AUDIO=m
CONFIG_CLK_ACTIONS=y
# CONFIG_CLK_OWL_S500 is not set
# CONFIG_CLK_OWL_S700 is not set
# CONFIG_CLK_OWL_S900 is not set
# CONFIG_CLK_BAIKAL_T1 is not set
CONFIG_CLK_BCM2711_DVP=m
# CONFIG_CLK_BCM2835 is not set
CONFIG_CLK_BCM_63XX=y
CONFIG_CLK_BCM_63XX_GATE=y
# CONFIG_CLK_BCM_KONA is not set
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
CONFIG_CLK_BCM_NS2=y
# CONFIG_CLK_BCM_SR is not set
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=m
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
# CONFIG_COMMON_CLK_HI3660 is not set
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=m
# CONFIG_COMMON_CLK_HI6220 is not set
CONFIG_RESET_HISI=y
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=m
CONFIG_CLK_IMX8MN=m
# CONFIG_CLK_IMX8MP is not set
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8ULP=y
CONFIG_CLK_IMX93=m

#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
CONFIG_INGENIC_CGU_JZ4740=y
# CONFIG_INGENIC_CGU_JZ4725B is not set
CONFIG_INGENIC_CGU_JZ4760=y
CONFIG_INGENIC_CGU_JZ4770=y
CONFIG_INGENIC_CGU_JZ4780=y
CONFIG_INGENIC_CGU_X1000=y
CONFIG_INGENIC_CGU_X1830=y
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers

CONFIG_TI_SYSCON_CLK=y

#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
# CONFIG_COMMON_CLK_MT2701_MMSYS is not set
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
# CONFIG_COMMON_CLK_MT2701_VDECSYS is not set
# CONFIG_COMMON_CLK_MT2701_HIFSYS is not set
# CONFIG_COMMON_CLK_MT2701_ETHSYS is not set
# CONFIG_COMMON_CLK_MT2701_BDPSYS is not set
# CONFIG_COMMON_CLK_MT2701_AUDSYS is not set
CONFIG_COMMON_CLK_MT2701_G3DSYS=y
# CONFIG_COMMON_CLK_MT2712 is not set
CONFIG_COMMON_CLK_MT6765=y
CONFIG_COMMON_CLK_MT6765_AUDIOSYS=y
CONFIG_COMMON_CLK_MT6765_CAMSYS=y
CONFIG_COMMON_CLK_MT6765_GCESYS=y
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
# CONFIG_COMMON_CLK_MT6765_VCODECSYS is not set
CONFIG_COMMON_CLK_MT6765_MFGSYS=y
# CONFIG_COMMON_CLK_MT6765_MIPI0ASYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI0BSYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI1ASYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI1BSYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI2ASYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI2BSYS is not set
CONFIG_COMMON_CLK_MT6779=m
CONFIG_COMMON_CLK_MT6779_MMSYS=m
# CONFIG_COMMON_CLK_MT6779_IMGSYS is not set
CONFIG_COMMON_CLK_MT6779_IPESYS=m
CONFIG_COMMON_CLK_MT6779_CAMSYS=m
CONFIG_COMMON_CLK_MT6779_VDECSYS=m
CONFIG_COMMON_CLK_MT6779_VENCSYS=m
CONFIG_COMMON_CLK_MT6779_MFGCFG=m
CONFIG_COMMON_CLK_MT6779_AUDSYS=m
CONFIG_COMMON_CLK_MT6797=y
# CONFIG_COMMON_CLK_MT6797_MMSYS is not set
CONFIG_COMMON_CLK_MT6797_IMGSYS=y
# CONFIG_COMMON_CLK_MT6797_VDECSYS is not set
# CONFIG_COMMON_CLK_MT6797_VENCSYS is not set
CONFIG_COMMON_CLK_MT7622=y
# CONFIG_COMMON_CLK_MT7622_ETHSYS is not set
# CONFIG_COMMON_CLK_MT7622_HIFSYS is not set
# CONFIG_COMMON_CLK_MT7622_AUDSYS is not set
CONFIG_COMMON_CLK_MT7629=y
# CONFIG_COMMON_CLK_MT7629_ETHSYS is not set
CONFIG_COMMON_CLK_MT7629_HIFSYS=y
# CONFIG_COMMON_CLK_MT7986 is not set
CONFIG_COMMON_CLK_MT8135=y
CONFIG_COMMON_CLK_MT8167=y
# CONFIG_COMMON_CLK_MT8167_AUDSYS is not set
# CONFIG_COMMON_CLK_MT8167_IMGSYS is not set
CONFIG_COMMON_CLK_MT8167_MFGCFG=y
# CONFIG_COMMON_CLK_MT8167_MMSYS is not set
CONFIG_COMMON_CLK_MT8167_VDECSYS=y
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

CONFIG_MSTAR_MSC313_MPLL=y
# CONFIG_MCHP_CLK_MPFS is not set
CONFIG_COMMON_CLK_PISTACHIO=y
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_S3C64XX_COMMON_CLK=y
# CONFIG_S5PV210_COMMON_CLK is not set
# CONFIG_EXYNOS_3250_COMMON_CLK is not set
# CONFIG_EXYNOS_4_COMMON_CLK is not set
CONFIG_EXYNOS_5250_COMMON_CLK=y
CONFIG_EXYNOS_5260_COMMON_CLK=y
CONFIG_EXYNOS_5410_COMMON_CLK=y
# CONFIG_EXYNOS_5420_COMMON_CLK is not set
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
# CONFIG_EXYNOS_AUDSS_CLK_CON is not set
# CONFIG_EXYNOS_CLKOUT is not set
# CONFIG_S3C2410_COMMON_CLK is not set
CONFIG_S3C2412_COMMON_CLK=y
CONFIG_S3C2443_COMMON_CLK=y
# CONFIG_TESLA_FSD_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_INTEL_SOCFPGA=y
CONFIG_CLK_INTEL_SOCFPGA32=y
CONFIG_CLK_INTEL_SOCFPGA64=y
CONFIG_SPRD_COMMON_CLK=y
CONFIG_SPRD_SC9860_CLK=m
CONFIG_SPRD_SC9863A_CLK=y
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
CONFIG_COMMON_CLK_TI_ADPLL=y
# CONFIG_COMMON_CLK_VISCONTI is not set
CONFIG_XILINX_VCU=m
# CONFIG_COMMON_CLK_ZYNQMP is not set
# CONFIG_HWSPINLOCK is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set
CONFIG_ROCKCHIP_IOMMU=y
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_IPMMU_VMSA is not set
# CONFIG_APPLE_DART is not set
CONFIG_ARM_SMMU=y
# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
CONFIG_MTK_IOMMU=y
CONFIG_QCOM_IOMMU=y
CONFIG_SPRD_IOMMU=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
CONFIG_MESON_CLK_MEASURE=m
CONFIG_MESON_GX_SOCINFO=y
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=m
CONFIG_ASPEED_UART_ROUTING=m
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers

CONFIG_AT91_SOC_ID=y
CONFIG_AT91_SOC_SFR=m

#
# Broadcom SoC drivers
#
CONFIG_SOC_BCM63XX=y
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=m
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
CONFIG_MTK_DEVAPC=m
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
CONFIG_QCOM_GSBI=m
CONFIG_QCOM_LLCC=m
CONFIG_QCOM_RPMH=m
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
CONFIG_QCOM_WCNSS_CTRL=y
# CONFIG_QCOM_APR is not set
CONFIG_QCOM_ICC_BWMON=m
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=m
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
CONFIG_ARM_TEGRA_DEVFREQ=y
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=y
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=m
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=m
# CONFIG_EXTCON_USBC_TUSB320 is not set
CONFIG_MEMORY=y
# CONFIG_BRCMSTB_DPFE is not set
CONFIG_BT1_L2_CTL=y
# CONFIG_TI_EMIF is not set
# CONFIG_FSL_CORENET_CF is not set
CONFIG_FSL_IFC=y
CONFIG_MTK_SMI=y
CONFIG_DA8XX_DDRCTL=y
# CONFIG_RENESAS_RPCIF is not set
CONFIG_STM32_FMC2_EBI=m
CONFIG_SAMSUNG_MC=y
# CONFIG_EXYNOS5422_DMC is not set
CONFIG_EXYNOS_SROM=y
# CONFIG_TEGRA_MC is not set
# CONFIG_IIO is not set
CONFIG_NTB=y
CONFIG_NTB_IDT=y
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=y
# CONFIG_NTB_PINGPONG is not set
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_BCM_IPROC is not set
CONFIG_PWM_BCM_KONA=m
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BERLIN=y
CONFIG_PWM_BRCMSTB=y
CONFIG_PWM_CLK=y
CONFIG_PWM_CLPS711X=m
# CONFIG_PWM_DWC is not set
CONFIG_PWM_EP93XX=y
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
CONFIG_PWM_IMX_TPM=m
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=y
# CONFIG_PWM_JZ4740 is not set
CONFIG_PWM_KEEMBAY=y
CONFIG_PWM_LP3943=m
CONFIG_PWM_LPC18XX_SCT=y
CONFIG_PWM_LPC32XX=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=m
CONFIG_PWM_MESON=m
CONFIG_PWM_MTK_DISP=y
CONFIG_PWM_MEDIATEK=m
CONFIG_PWM_NTXEC=m
CONFIG_PWM_PCA9685=m
CONFIG_PWM_PXA=y
CONFIG_PWM_RASPBERRYPI_POE=y
CONFIG_PWM_RCAR=m
CONFIG_PWM_RENESAS_TPU=m
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPRD is not set
CONFIG_PWM_STM32=m
CONFIG_PWM_STM32_LP=m
CONFIG_PWM_SUN4I=y
# CONFIG_PWM_TEGRA is not set
CONFIG_PWM_TIECAP=y
CONFIG_PWM_TIEHRPWM=m
# CONFIG_PWM_TWL is not set
CONFIG_PWM_TWL_LED=y
CONFIG_PWM_VISCONTI=m
CONFIG_PWM_VT8500=m

#
# IRQ chip support
#
# CONFIG_AL_FIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
CONFIG_RENESAS_IRQC=y
# CONFIG_RENESAS_RZA1_IRQC is not set
CONFIG_RENESAS_RZG2L_IRQC=y
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
CONFIG_MESON_IRQ_GPIO=y
# CONFIG_IMX_IRQSTEER is not set
CONFIG_IMX_INTMUX=y
CONFIG_EXYNOS_IRQ_COMBINER=y
# CONFIG_MST_IRQ is not set
CONFIG_MCHP_EIC=y
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
CONFIG_RESET_BRCMSTB=m
CONFIG_RESET_BRCMSTB_RESCAL=m
CONFIG_RESET_HSDK=y
# CONFIG_RESET_IMX7 is not set
CONFIG_RESET_LANTIQ=y
# CONFIG_RESET_LPC18XX is not set
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_MESON=m
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
CONFIG_RESET_QCOM_AOSS=m
# CONFIG_RESET_QCOM_PDC is not set
CONFIG_RESET_RASPBERRYPI=y
CONFIG_RESET_RZG2L_USBPHY_CTRL=m
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
CONFIG_RESET_STARFIVE_JH7100=y
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_RESET_TI_SCI=y
CONFIG_RESET_TI_SYSCON=m
CONFIG_RESET_TI_TPS380X=m
CONFIG_RESET_TN48M_CPLD=m
# CONFIG_RESET_ZYNQ is not set
CONFIG_COMMON_RESET_HI3660=m
CONFIG_COMMON_RESET_HI6220=y

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_PISTACHIO_USB=m
CONFIG_PHY_CAN_TRANSCEIVER=m
CONFIG_PHY_SUN6I_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_NS2_PCIE is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_HI6220_USB is not set
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=m
CONFIG_PHY_HI3670_PCIE=y
CONFIG_PHY_HISTB_COMBPHY=y
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=m
# CONFIG_PHY_PXA_USB is not set
CONFIG_PHY_MMP3_USB=m
CONFIG_PHY_MMP3_HSIC=m
CONFIG_PHY_MT7621_PCI=m
CONFIG_PHY_RALINK_USB=m
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
CONFIG_PHY_ROCKCHIP_DPHY_RX0=m
# CONFIG_PHY_ROCKCHIP_PCIE is not set
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
CONFIG_PHY_SAMSUNG_USB2=m
# CONFIG_PHY_S5PV210_USB2 is not set
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=m
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=m
CONFIG_PHY_AM654_SERDES=y
CONFIG_OMAP_CONTROL_PHY=y
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
CONFIG_PHY_INTEL_LGM_EMMC=y
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=m
CONFIG_MCB_PCI=m
# CONFIG_MCB_LPC is not set

#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
CONFIG_ARM_CMN=m
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_XGENE_PMU is not set
CONFIG_ARM_DMC620_PMU=y
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
CONFIG_HNS3_PMU=m
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_USB4=y
CONFIG_USB4_DEBUGFS_WRITE=y
CONFIG_USB4_DMA_TEST=m

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_IMX_IIM=y
# CONFIG_NVMEM_IMX_OCOTP is not set
CONFIG_NVMEM_LPC18XX_EEPROM=m
# CONFIG_NVMEM_LPC18XX_OTP is not set
CONFIG_NVMEM_MXS_OCOTP=y
# CONFIG_MTK_EFUSE is not set
# CONFIG_MICROCHIP_OTPC is not set
CONFIG_NVMEM_NINTENDO_OTP=y
# CONFIG_QCOM_QFPROM is not set
CONFIG_NVMEM_SPMI_SDAM=y
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_ROCKCHIP_OTP is not set
CONFIG_NVMEM_BCM_OCOTP=y
CONFIG_NVMEM_STM32_ROMEM=y
# CONFIG_UNIPHIER_EFUSE is not set
CONFIG_NVMEM_VF610_OCOTP=y
# CONFIG_MESON_MX_EFUSE is not set
CONFIG_NVMEM_SNVS_LPGPR=m
# CONFIG_SC27XX_EFUSE is not set
# CONFIG_SPRD_EFUSE is not set
CONFIG_NVMEM_RMEM=y
CONFIG_NVMEM_BRCM_NVRAM=y
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
CONFIG_NVMEM_SUNPLUS_OCOTP=y
# CONFIG_NVMEM_APPLE_EFUSES is not set

#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
# CONFIG_INTEL_TH_GTH is not set
CONFIG_INTEL_TH_MSU=y
# CONFIG_INTEL_TH_PTI is not set
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_FPGA_MGR_SOCFPGA is not set
CONFIG_FPGA_MGR_SOCFPGA_A10=y
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
# CONFIG_FPGA_REGION is not set
# CONFIG_FPGA_DFL is not set
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
# CONFIG_MUX_GPIO is not set
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=m
# CONFIG_INTERCONNECT_IMX8MM is not set
CONFIG_INTERCONNECT_IMX8MN=m
CONFIG_INTERCONNECT_IMX8MQ=m
CONFIG_INTERCONNECT_IMX8MP=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=y
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=m
# CONFIG_104_QUAD_8 is not set
CONFIG_INTERRUPT_CNT=m
CONFIG_STM32_TIMER_CNT=m
CONFIG_STM32_LPTIMER_CNT=m
CONFIG_TI_EQEP=m
CONFIG_INTEL_QEP=m
# CONFIG_MOST is not set
# CONFIG_PECI is not set
CONFIG_HTE=y
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
# CONFIG_XFS_SUPPORT_V4 is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_CACHEFILES is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_TMPFS_INODE64=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_UNICODE is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=m

#
# No trust source selected!
#
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_KEYWRAP=m
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_HCTR2=y
# CONFIG_CRYPTO_ESSIV is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_XXHASH is not set
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_USER_API=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
CONFIG_CRYPTO_DEV_S5P=y
# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
CONFIG_CRYPTO_DEV_QAT_4XXX=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_CAVIUM_ZIP=m
# CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
CONFIG_CRYPTO_DEV_ZYNQMP_AES=y
CONFIG_CRYPTO_DEV_ZYNQMP_SHA3=y
# CONFIG_CRYPTO_DEV_VIRTIO is not set
CONFIG_CRYPTO_DEV_SAFEXCEL=y
CONFIG_CRYPTO_DEV_HISI_SEC=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_CRYPTO_DEV_SA2UL=m
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU_HMAC_SHA224=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_NO_SG_CHAIN=y
CONFIG_MEMREGION=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
CONFIG_OBJAGG=y
# end of Library routines

CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_POLYNOMIAL=m

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
# CONFIG_UBSAN_BOUNDS is not set
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
CONFIG_UBSAN_UNREACHABLE=y
# CONFIG_UBSAN_BOOL is not set
CONFIG_UBSAN_ENUM=y
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
CONFIG_NET_NS_REFCNT_TRACKER=y
CONFIG_DEBUG_NET=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_VM_PGFLAGS is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
CONFIG_KFENCE_STATIC_KEYS=y
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=m
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# parisc Debugging
#
# end of parisc Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=m
CONFIG_REED_SOLOMON_TEST=m
CONFIG_INTERVAL_TREE_TEST=y
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_HEXDUMP=y
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_STRSCPY=m
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_RHASHTABLE=y
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
# CONFIG_TEST_VMALLOC is not set
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=m
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_OBJAGG is not set
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_FREE_PAGES=y
# end of Kernel Testing and Coverage

# CONFIG_WARN_MISSING_DOCUMENTS is not set
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking