From: Richard Zhu <hongxing.zhu@nxp.com>
To: vkoul@kernel.org, a.fatoum@pengutronix.de,
p.zabel@pengutronix.de, l.stach@pengutronix.de,
bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
shawnguo@kernel.org, alexander.stein@ew.tq-group.com,
marex@denx.de, richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v11 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver
Date: Mon, 3 Oct 2022 13:24:54 +0800 [thread overview]
Message-ID: <1664774695-23483-4-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1664774695-23483-1-git-send-email-hongxing.zhu@nxp.com>
To make it more flexible and easy to expand. Refine i.MX8MM PCIe PHY
driver.
- Use gpr compatible string to avoid the codes duplications when add
another platform PCIe PHY support.
- Re-arrange the codes to let it more flexible and easy to expand.
No functional change. Re-arrange the TX tuning, since internal registers
can be wrote through APB interface before assertion of CMN_RST.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 106 +++++++++++++--------
1 file changed, 66 insertions(+), 40 deletions(-)
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 2377ed307b53..ed8e0011d736 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,7 @@
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -45,6 +46,15 @@
#define IMX8MM_GPR_PCIE_SSC_EN BIT(16)
#define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9)
+enum imx8_pcie_phy_type {
+ IMX8MM,
+};
+
+struct imx8_pcie_phy_drvdata {
+ const char *gpr;
+ enum imx8_pcie_phy_type variant;
+};
+
struct imx8_pcie_phy {
void __iomem *base;
struct clk *clk;
@@ -55,6 +65,7 @@ struct imx8_pcie_phy {
u32 tx_deemph_gen1;
u32 tx_deemph_gen2;
bool clkreq_unused;
+ const struct imx8_pcie_phy_drvdata *drvdata;
};
static int imx8_pcie_phy_init(struct phy *phy)
@@ -66,31 +77,17 @@ static int imx8_pcie_phy_init(struct phy *phy)
reset_control_assert(imx8_phy->reset);
pad_mode = imx8_phy->refclk_pad_mode;
- /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
- imx8_phy->clkreq_unused ?
- 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN,
- IMX8MM_GPR_PCIE_AUX_EN);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_POWER_OFF, 0);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_SSC_EN, 0);
-
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_REF_CLK_SEL,
- pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
- IMX8MM_GPR_PCIE_REF_CLK_EXT :
- IMX8MM_GPR_PCIE_REF_CLK_PLL);
- usleep_range(100, 200);
-
- /* Do the PHY common block reset */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_CMN_RST,
- IMX8MM_GPR_PCIE_CMN_RST);
- usleep_range(200, 500);
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ /* Tune PHY de-emphasis setting to pass PCIe compliance. */
+ if (imx8_phy->tx_deemph_gen1)
+ writel(imx8_phy->tx_deemph_gen1,
+ imx8_phy->base + PCIE_PHY_TRSV_REG5);
+ if (imx8_phy->tx_deemph_gen2)
+ writel(imx8_phy->tx_deemph_gen2,
+ imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ break;
+ }
if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -118,15 +115,37 @@ static int imx8_pcie_phy_init(struct phy *phy)
imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
}
- /* Tune PHY de-emphasis setting to pass PCIe compliance. */
- if (imx8_phy->tx_deemph_gen1)
- writel(imx8_phy->tx_deemph_gen1,
- imx8_phy->base + PCIE_PHY_TRSV_REG5);
- if (imx8_phy->tx_deemph_gen2)
- writel(imx8_phy->tx_deemph_gen2,
- imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+ imx8_phy->clkreq_unused ?
+ 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN,
+ IMX8MM_GPR_PCIE_AUX_EN);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_POWER_OFF, 0);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_SSC_EN, 0);
- reset_control_deassert(imx8_phy->reset);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_REF_CLK_SEL,
+ pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+ IMX8MM_GPR_PCIE_REF_CLK_EXT :
+ IMX8MM_GPR_PCIE_REF_CLK_PLL);
+ usleep_range(100, 200);
+
+ /* Do the PHY common block reset */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_CMN_RST,
+ IMX8MM_GPR_PCIE_CMN_RST);
+
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ reset_control_deassert(imx8_phy->reset);
+ usleep_range(200, 500);
+ break;
+ }
/* Polling to check the phy is ready or not. */
ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
@@ -157,6 +176,17 @@ static const struct phy_ops imx8_pcie_phy_ops = {
.owner = THIS_MODULE,
};
+static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {
+ .gpr = "fsl,imx8mm-iomuxc-gpr",
+ .variant = IMX8MM,
+};
+
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+ {.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
static int imx8_pcie_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
@@ -169,6 +199,8 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
if (!imx8_phy)
return -ENOMEM;
+ imx8_phy->drvdata = of_device_get_match_data(dev);
+
/* get PHY refclk pad mode */
of_property_read_u32(np, "fsl,refclk-pad-mode",
&imx8_phy->refclk_pad_mode);
@@ -194,7 +226,7 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
/* Grab GPR config register range */
imx8_phy->iomuxc_gpr =
- syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr);
if (IS_ERR(imx8_phy->iomuxc_gpr)) {
dev_err(dev, "unable to find iomuxc registers\n");
return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -222,12 +254,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
- {.compatible = "fsl,imx8mm-pcie-phy",},
- { },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
static struct platform_driver imx8_pcie_phy_driver = {
.probe = imx8_pcie_phy_probe,
.driver = {
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com>
To: vkoul@kernel.org, a.fatoum@pengutronix.de,
p.zabel@pengutronix.de, l.stach@pengutronix.de,
bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
shawnguo@kernel.org, alexander.stein@ew.tq-group.com,
marex@denx.de, richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v11 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver
Date: Mon, 3 Oct 2022 13:24:54 +0800 [thread overview]
Message-ID: <1664774695-23483-4-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1664774695-23483-1-git-send-email-hongxing.zhu@nxp.com>
To make it more flexible and easy to expand. Refine i.MX8MM PCIe PHY
driver.
- Use gpr compatible string to avoid the codes duplications when add
another platform PCIe PHY support.
- Re-arrange the codes to let it more flexible and easy to expand.
No functional change. Re-arrange the TX tuning, since internal registers
can be wrote through APB interface before assertion of CMN_RST.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 106 +++++++++++++--------
1 file changed, 66 insertions(+), 40 deletions(-)
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 2377ed307b53..ed8e0011d736 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,7 @@
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -45,6 +46,15 @@
#define IMX8MM_GPR_PCIE_SSC_EN BIT(16)
#define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9)
+enum imx8_pcie_phy_type {
+ IMX8MM,
+};
+
+struct imx8_pcie_phy_drvdata {
+ const char *gpr;
+ enum imx8_pcie_phy_type variant;
+};
+
struct imx8_pcie_phy {
void __iomem *base;
struct clk *clk;
@@ -55,6 +65,7 @@ struct imx8_pcie_phy {
u32 tx_deemph_gen1;
u32 tx_deemph_gen2;
bool clkreq_unused;
+ const struct imx8_pcie_phy_drvdata *drvdata;
};
static int imx8_pcie_phy_init(struct phy *phy)
@@ -66,31 +77,17 @@ static int imx8_pcie_phy_init(struct phy *phy)
reset_control_assert(imx8_phy->reset);
pad_mode = imx8_phy->refclk_pad_mode;
- /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
- imx8_phy->clkreq_unused ?
- 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN,
- IMX8MM_GPR_PCIE_AUX_EN);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_POWER_OFF, 0);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_SSC_EN, 0);
-
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_REF_CLK_SEL,
- pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
- IMX8MM_GPR_PCIE_REF_CLK_EXT :
- IMX8MM_GPR_PCIE_REF_CLK_PLL);
- usleep_range(100, 200);
-
- /* Do the PHY common block reset */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_CMN_RST,
- IMX8MM_GPR_PCIE_CMN_RST);
- usleep_range(200, 500);
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ /* Tune PHY de-emphasis setting to pass PCIe compliance. */
+ if (imx8_phy->tx_deemph_gen1)
+ writel(imx8_phy->tx_deemph_gen1,
+ imx8_phy->base + PCIE_PHY_TRSV_REG5);
+ if (imx8_phy->tx_deemph_gen2)
+ writel(imx8_phy->tx_deemph_gen2,
+ imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ break;
+ }
if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -118,15 +115,37 @@ static int imx8_pcie_phy_init(struct phy *phy)
imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
}
- /* Tune PHY de-emphasis setting to pass PCIe compliance. */
- if (imx8_phy->tx_deemph_gen1)
- writel(imx8_phy->tx_deemph_gen1,
- imx8_phy->base + PCIE_PHY_TRSV_REG5);
- if (imx8_phy->tx_deemph_gen2)
- writel(imx8_phy->tx_deemph_gen2,
- imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+ imx8_phy->clkreq_unused ?
+ 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN,
+ IMX8MM_GPR_PCIE_AUX_EN);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_POWER_OFF, 0);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_SSC_EN, 0);
- reset_control_deassert(imx8_phy->reset);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_REF_CLK_SEL,
+ pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+ IMX8MM_GPR_PCIE_REF_CLK_EXT :
+ IMX8MM_GPR_PCIE_REF_CLK_PLL);
+ usleep_range(100, 200);
+
+ /* Do the PHY common block reset */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_CMN_RST,
+ IMX8MM_GPR_PCIE_CMN_RST);
+
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ reset_control_deassert(imx8_phy->reset);
+ usleep_range(200, 500);
+ break;
+ }
/* Polling to check the phy is ready or not. */
ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
@@ -157,6 +176,17 @@ static const struct phy_ops imx8_pcie_phy_ops = {
.owner = THIS_MODULE,
};
+static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {
+ .gpr = "fsl,imx8mm-iomuxc-gpr",
+ .variant = IMX8MM,
+};
+
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+ {.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
static int imx8_pcie_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
@@ -169,6 +199,8 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
if (!imx8_phy)
return -ENOMEM;
+ imx8_phy->drvdata = of_device_get_match_data(dev);
+
/* get PHY refclk pad mode */
of_property_read_u32(np, "fsl,refclk-pad-mode",
&imx8_phy->refclk_pad_mode);
@@ -194,7 +226,7 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
/* Grab GPR config register range */
imx8_phy->iomuxc_gpr =
- syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr);
if (IS_ERR(imx8_phy->iomuxc_gpr)) {
dev_err(dev, "unable to find iomuxc registers\n");
return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -222,12 +254,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
- {.compatible = "fsl,imx8mm-pcie-phy",},
- { },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
static struct platform_driver imx8_pcie_phy_driver = {
.probe = imx8_pcie_phy_probe,
.driver = {
--
2.25.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com>
To: vkoul@kernel.org, a.fatoum@pengutronix.de,
p.zabel@pengutronix.de, l.stach@pengutronix.de,
bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
shawnguo@kernel.org, alexander.stein@ew.tq-group.com,
marex@denx.de, richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v11 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver
Date: Mon, 3 Oct 2022 13:24:54 +0800 [thread overview]
Message-ID: <1664774695-23483-4-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1664774695-23483-1-git-send-email-hongxing.zhu@nxp.com>
To make it more flexible and easy to expand. Refine i.MX8MM PCIe PHY
driver.
- Use gpr compatible string to avoid the codes duplications when add
another platform PCIe PHY support.
- Re-arrange the codes to let it more flexible and easy to expand.
No functional change. Re-arrange the TX tuning, since internal registers
can be wrote through APB interface before assertion of CMN_RST.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 106 +++++++++++++--------
1 file changed, 66 insertions(+), 40 deletions(-)
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 2377ed307b53..ed8e0011d736 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,7 @@
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -45,6 +46,15 @@
#define IMX8MM_GPR_PCIE_SSC_EN BIT(16)
#define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9)
+enum imx8_pcie_phy_type {
+ IMX8MM,
+};
+
+struct imx8_pcie_phy_drvdata {
+ const char *gpr;
+ enum imx8_pcie_phy_type variant;
+};
+
struct imx8_pcie_phy {
void __iomem *base;
struct clk *clk;
@@ -55,6 +65,7 @@ struct imx8_pcie_phy {
u32 tx_deemph_gen1;
u32 tx_deemph_gen2;
bool clkreq_unused;
+ const struct imx8_pcie_phy_drvdata *drvdata;
};
static int imx8_pcie_phy_init(struct phy *phy)
@@ -66,31 +77,17 @@ static int imx8_pcie_phy_init(struct phy *phy)
reset_control_assert(imx8_phy->reset);
pad_mode = imx8_phy->refclk_pad_mode;
- /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
- imx8_phy->clkreq_unused ?
- 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_AUX_EN,
- IMX8MM_GPR_PCIE_AUX_EN);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_POWER_OFF, 0);
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_SSC_EN, 0);
-
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_REF_CLK_SEL,
- pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
- IMX8MM_GPR_PCIE_REF_CLK_EXT :
- IMX8MM_GPR_PCIE_REF_CLK_PLL);
- usleep_range(100, 200);
-
- /* Do the PHY common block reset */
- regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
- IMX8MM_GPR_PCIE_CMN_RST,
- IMX8MM_GPR_PCIE_CMN_RST);
- usleep_range(200, 500);
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ /* Tune PHY de-emphasis setting to pass PCIe compliance. */
+ if (imx8_phy->tx_deemph_gen1)
+ writel(imx8_phy->tx_deemph_gen1,
+ imx8_phy->base + PCIE_PHY_TRSV_REG5);
+ if (imx8_phy->tx_deemph_gen2)
+ writel(imx8_phy->tx_deemph_gen2,
+ imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ break;
+ }
if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -118,15 +115,37 @@ static int imx8_pcie_phy_init(struct phy *phy)
imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
}
- /* Tune PHY de-emphasis setting to pass PCIe compliance. */
- if (imx8_phy->tx_deemph_gen1)
- writel(imx8_phy->tx_deemph_gen1,
- imx8_phy->base + PCIE_PHY_TRSV_REG5);
- if (imx8_phy->tx_deemph_gen2)
- writel(imx8_phy->tx_deemph_gen2,
- imx8_phy->base + PCIE_PHY_TRSV_REG6);
+ /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+ imx8_phy->clkreq_unused ?
+ 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_AUX_EN,
+ IMX8MM_GPR_PCIE_AUX_EN);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_POWER_OFF, 0);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_SSC_EN, 0);
- reset_control_deassert(imx8_phy->reset);
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_REF_CLK_SEL,
+ pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+ IMX8MM_GPR_PCIE_REF_CLK_EXT :
+ IMX8MM_GPR_PCIE_REF_CLK_PLL);
+ usleep_range(100, 200);
+
+ /* Do the PHY common block reset */
+ regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+ IMX8MM_GPR_PCIE_CMN_RST,
+ IMX8MM_GPR_PCIE_CMN_RST);
+
+ switch (imx8_phy->drvdata->variant) {
+ case IMX8MM:
+ reset_control_deassert(imx8_phy->reset);
+ usleep_range(200, 500);
+ break;
+ }
/* Polling to check the phy is ready or not. */
ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
@@ -157,6 +176,17 @@ static const struct phy_ops imx8_pcie_phy_ops = {
.owner = THIS_MODULE,
};
+static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = {
+ .gpr = "fsl,imx8mm-iomuxc-gpr",
+ .variant = IMX8MM,
+};
+
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+ {.compatible = "fsl,imx8mm-pcie-phy", .data = &imx8mm_drvdata, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
static int imx8_pcie_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
@@ -169,6 +199,8 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
if (!imx8_phy)
return -ENOMEM;
+ imx8_phy->drvdata = of_device_get_match_data(dev);
+
/* get PHY refclk pad mode */
of_property_read_u32(np, "fsl,refclk-pad-mode",
&imx8_phy->refclk_pad_mode);
@@ -194,7 +226,7 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
/* Grab GPR config register range */
imx8_phy->iomuxc_gpr =
- syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ syscon_regmap_lookup_by_compatible(imx8_phy->drvdata->gpr);
if (IS_ERR(imx8_phy->iomuxc_gpr)) {
dev_err(dev, "unable to find iomuxc registers\n");
return PTR_ERR(imx8_phy->iomuxc_gpr);
@@ -222,12 +254,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
- {.compatible = "fsl,imx8mm-pcie-phy",},
- { },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
static struct platform_driver imx8_pcie_phy_driver = {
.probe = imx8_pcie_phy_probe,
.driver = {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-03 5:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-03 5:24 [PATCH v11 0/4] Add the iMX8MP PCIe support Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` [PATCH v11 1/4] dt-binding: phy: Add i.MX8MP PCIe PHY binding Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` [PATCH v11 2/4] phy: freescale: imx8m-pcie: Refine register definitions Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` Richard Zhu [this message]
2022-10-03 5:24 ` [PATCH v11 3/4] phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` [PATCH v11 4/4] phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support Richard Zhu
2022-10-03 5:24 ` Richard Zhu
2022-10-03 5:24 ` Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1664774695-23483-4-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=a.fatoum@pengutronix.de \
--cc=alexander.stein@ew.tq-group.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marex@denx.de \
--cc=p.zabel@pengutronix.de \
--cc=richard.leitner@linux.dev \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.