[PATCH v13 0/5] Add data-lanes and link-frequencies to dp_out endpoint

[PATCH v13 0/5] Add data-lanes and link-frequencies to dp_out endpoint

[Kuogee Hsieh]

Add DP both data-lanes and link-frequencies property to dp_out endpoint and support
functions to DP driver.

Kuogee Hsieh (5):
  arm64: dts: qcom: add data-lanes and link-freuencies into dp_out
    endpoint
  dt-bindings: msm/dp: add data-lanes and link-frequencies property
  drm/msm/dp: parser data-lanes as property of dp_out endpoint
  drm/msm/dp: parser link-frequencies as property of dp_out endpoint
  drm/msm/dp: add support of max dp link rate

 .../bindings/display/msm/dp-controller.yaml        | 26 ++++++++++-
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi       |  6 ++-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi     |  6 ++-
 drivers/gpu/drm/msm/dp/dp_display.c                |  4 ++
 drivers/gpu/drm/msm/dp/dp_panel.c                  |  7 +--
 drivers/gpu/drm/msm/dp/dp_panel.h                  |  1 +
 drivers/gpu/drm/msm/dp/dp_parser.c                 | 52 ++++++++++++++++++----
 drivers/gpu/drm/msm/dp/dp_parser.h                 |  2 +
 8 files changed, 89 insertions(+), 15 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 0/5] Add data-lanes and link-frequencies to dp_out endpoint

[Kuogee Hsieh]

Add DP both data-lanes and link-frequencies property to dp_out endpoint and support
functions to DP driver.

Kuogee Hsieh (5):
  arm64: dts: qcom: add data-lanes and link-freuencies into dp_out
    endpoint
  dt-bindings: msm/dp: add data-lanes and link-frequencies property
  drm/msm/dp: parser data-lanes as property of dp_out endpoint
  drm/msm/dp: parser link-frequencies as property of dp_out endpoint
  drm/msm/dp: add support of max dp link rate

 .../bindings/display/msm/dp-controller.yaml        | 26 ++++++++++-
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi       |  6 ++-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi     |  6 ++-
 drivers/gpu/drm/msm/dp/dp_display.c                |  4 ++
 drivers/gpu/drm/msm/dp/dp_panel.c                  |  7 +--
 drivers/gpu/drm/msm/dp/dp_panel.h                  |  1 +
 drivers/gpu/drm/msm/dp/dp_parser.c                 | 52 ++++++++++++++++++----
 drivers/gpu/drm/msm/dp/dp_parser.h                 |  2 +
 8 files changed, 89 insertions(+), 15 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 1/5] arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpoint

[Kuogee Hsieh]

Move data-lanes property from mdss_dp node to dp_out endpoint. Also
add link-frequencies property into dp_out endpoint as well. The last
frequency specified at link-frequencies will be the max link rate
supported by DP.

Changes in v5:
-- revert changes at sc7180.dtsi and sc7280.dtsi
-- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi

Changes in v6:
-- add data-lanes and link-frequencies to yaml

Changes in v7:
-- change 160000000 to 1620000000
-- separate yaml to different patch

Changes in v8:
-- correct Bjorn mail address to kernel.org

Changes in v9:
-- use symbol rate (hz) for link-frequencies at dp_out at sc7180_trogdor.dtsi

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi   | 6 +++++-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index eae22e6..93b0cde 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -814,7 +814,11 @@ hp_i2c: &i2c9 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hot_plug_det>;
-	data-lanes = <0 1>;
+};
+
+&dp_out {
+    data-lanes = <0  1>;
+    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
 };
 
 &pm6150_adc {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index c11e371..3c7a9d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -442,7 +442,11 @@ ap_i2c_tpm: &i2c14 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hot_plug_det>;
-	data-lanes = <0 1>;
+};
+
+&dp_out {
+	data-lanes = <0  1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_mdp {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 1/5] arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpoint

[Kuogee Hsieh]

Move data-lanes property from mdss_dp node to dp_out endpoint. Also
add link-frequencies property into dp_out endpoint as well. The last
frequency specified at link-frequencies will be the max link rate
supported by DP.

Changes in v5:
-- revert changes at sc7180.dtsi and sc7280.dtsi
-- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi

Changes in v6:
-- add data-lanes and link-frequencies to yaml

Changes in v7:
-- change 160000000 to 1620000000
-- separate yaml to different patch

Changes in v8:
-- correct Bjorn mail address to kernel.org

Changes in v9:
-- use symbol rate (hz) for link-frequencies at dp_out at sc7180_trogdor.dtsi

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi   | 6 +++++-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index eae22e6..93b0cde 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -814,7 +814,11 @@ hp_i2c: &i2c9 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hot_plug_det>;
-	data-lanes = <0 1>;
+};
+
+&dp_out {
+    data-lanes = <0  1>;
+    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
 };
 
 &pm6150_adc {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index c11e371..3c7a9d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -442,7 +442,11 @@ ap_i2c_tpm: &i2c14 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hot_plug_det>;
-	data-lanes = <0 1>;
+};
+
+&dp_out {
+	data-lanes = <0  1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_mdp {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 2/5] dt-bindings: msm/dp: add data-lanes and link-frequencies property

[Kuogee Hsieh]

Add both data-lanes and link-frequencies property into endpoint

Changes in v7:
-- split yaml out of dtsi patch
-- link-frequencies from link rate to symbol rate
-- deprecation of old data-lanes property

Changes in v8:
-- correct Bjorn mail address to kernel.org

Changes in v10:
-- add menu item to data-lanes and link-frequecnis

Changes in v11:
-- add endpoint property at port@1

Changes in v12:
-- use enum for item at data-lanes and link-frequencies

Changes in v13:
-- revised changes at port@0
-- use correct ref schemas for both port@0 and port@1
-- mark both port@0 and port@1 are required
-- add line between data-lanes and link-frequencies properties

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>`
---
 .../bindings/display/msm/dp-controller.yaml        | 26 ++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f2515af..9d002de 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -81,6 +81,7 @@ properties:
 
   data-lanes:
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
     minItems: 1
     maxItems: 4
     items:
@@ -98,12 +99,31 @@ properties:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: "/schemas/graph.yaml#/$defs/port-base"
         description: Input endpoint of the controller
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: "/schemas/graph.yaml#/$defs/port-base"
         description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+              link-frequencies:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -193,6 +213,8 @@ examples:
                 reg = <1>;
                 endpoint {
                     remote-endpoint = <&typec>;
+                    data-lanes = <0 1>;
+                    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 
                 };
             };
         };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 2/5] dt-bindings: msm/dp: add data-lanes and link-frequencies property

[Kuogee Hsieh]

Add both data-lanes and link-frequencies property into endpoint

Changes in v7:
-- split yaml out of dtsi patch
-- link-frequencies from link rate to symbol rate
-- deprecation of old data-lanes property

Changes in v8:
-- correct Bjorn mail address to kernel.org

Changes in v10:
-- add menu item to data-lanes and link-frequecnis

Changes in v11:
-- add endpoint property at port@1

Changes in v12:
-- use enum for item at data-lanes and link-frequencies

Changes in v13:
-- revised changes at port@0
-- use correct ref schemas for both port@0 and port@1
-- mark both port@0 and port@1 are required
-- add line between data-lanes and link-frequencies properties

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>`
---
 .../bindings/display/msm/dp-controller.yaml        | 26 ++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f2515af..9d002de 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -81,6 +81,7 @@ properties:
 
   data-lanes:
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
     minItems: 1
     maxItems: 4
     items:
@@ -98,12 +99,31 @@ properties:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: "/schemas/graph.yaml#/$defs/port-base"
         description: Input endpoint of the controller
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: "/schemas/graph.yaml#/$defs/port-base"
         description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+              link-frequencies:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -193,6 +213,8 @@ examples:
                 reg = <1>;
                 endpoint {
                     remote-endpoint = <&typec>;
+                    data-lanes = <0 1>;
+                    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 
                 };
             };
         };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 3/5] drm/msm/dp: parser data-lanes as property of dp_out endpoint

[Kuogee Hsieh]

Add capability to parser data-lanes as property of dp_out endpoint.
Also retain the original capability to parser data-lanes as property
of mdss_dp node to handle legacy case.

Changes in v6:
-- first patch after split parser patch into two

Changes in v7:
-- check "data-lanes" from endpoint first

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_parser.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index dd73221..b5f7e70 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -94,16 +94,25 @@ static int dp_parser_ctrl_res(struct dp_parser *parser)
 static int dp_parser_misc(struct dp_parser *parser)
 {
 	struct device_node *of_node = parser->pdev->dev.of_node;
-	int len;
-
-	len = drm_of_get_data_lanes_count(of_node, 1, DP_MAX_NUM_DP_LANES);
-	if (len < 0) {
-		DRM_WARN("Invalid property \"data-lanes\", default max DP lanes = %d\n",
-			 DP_MAX_NUM_DP_LANES);
-		len = DP_MAX_NUM_DP_LANES;
+	int cnt;
+
+	/*
+	 * data-lanes is the property of dp_out endpoint
+	 */
+	cnt = drm_of_get_data_lanes_count_ep(of_node, 1, 0, 1, DP_MAX_NUM_DP_LANES);
+	if (cnt > 0)
+		parser->max_dp_lanes = cnt;
+	else {
+		/*
+		 * legacy code, data-lanes is the property of mdss_dp node
+		 */
+		cnt = drm_of_get_data_lanes_count(of_node, 1, DP_MAX_NUM_DP_LANES);
+		if (cnt > 0)
+			parser->max_dp_lanes = cnt;
+		else
+			parser->max_dp_lanes = DP_MAX_NUM_DP_LANES; /* 4 lanes */
 	}
 
-	parser->max_dp_lanes = len;
 	return 0;
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 3/5] drm/msm/dp: parser data-lanes as property of dp_out endpoint

[Kuogee Hsieh]

Add capability to parser data-lanes as property of dp_out endpoint.
Also retain the original capability to parser data-lanes as property
of mdss_dp node to handle legacy case.

Changes in v6:
-- first patch after split parser patch into two

Changes in v7:
-- check "data-lanes" from endpoint first

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_parser.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index dd73221..b5f7e70 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -94,16 +94,25 @@ static int dp_parser_ctrl_res(struct dp_parser *parser)
 static int dp_parser_misc(struct dp_parser *parser)
 {
 	struct device_node *of_node = parser->pdev->dev.of_node;
-	int len;
-
-	len = drm_of_get_data_lanes_count(of_node, 1, DP_MAX_NUM_DP_LANES);
-	if (len < 0) {
-		DRM_WARN("Invalid property \"data-lanes\", default max DP lanes = %d\n",
-			 DP_MAX_NUM_DP_LANES);
-		len = DP_MAX_NUM_DP_LANES;
+	int cnt;
+
+	/*
+	 * data-lanes is the property of dp_out endpoint
+	 */
+	cnt = drm_of_get_data_lanes_count_ep(of_node, 1, 0, 1, DP_MAX_NUM_DP_LANES);
+	if (cnt > 0)
+		parser->max_dp_lanes = cnt;
+	else {
+		/*
+		 * legacy code, data-lanes is the property of mdss_dp node
+		 */
+		cnt = drm_of_get_data_lanes_count(of_node, 1, DP_MAX_NUM_DP_LANES);
+		if (cnt > 0)
+			parser->max_dp_lanes = cnt;
+		else
+			parser->max_dp_lanes = DP_MAX_NUM_DP_LANES; /* 4 lanes */
 	}
 
-	parser->max_dp_lanes = len;
 	return 0;
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 4/5] drm/msm/dp: parser link-frequencies as property of dp_out endpoint

[Kuogee Hsieh]

Add capability to parser and retrieve max DP link supported rate from
link-frequencies property of dp_out endpoint.

Changes in v6:
-- second patch after split parser patch into two patches

Changes in v7:
-- without checking cnt against DP_MAX_NUM_DP_LANES to retrieve link rate

Changes in v9:
-- separate parser link-frequencies out of data-lanes

Changes in v10:
-- add dp_parser_link_frequencies()

Changes in v11:
-- return 0 if(!endpoint)

Changes in v12:
-- replace khz with kbytes at dp_parser.h

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_parser.c | 27 +++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_parser.h |  2 ++
 2 files changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index b5f7e70..5549495 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -91,6 +91,29 @@ static int dp_parser_ctrl_res(struct dp_parser *parser)
 	return 0;
 }
 
+static u32 dp_parser_link_frequencies(struct device_node *of_node)
+{
+	struct device_node *endpoint;
+	u64 frequency = 0;
+	int cnt = 0;
+
+	endpoint = of_graph_get_endpoint_by_regs(of_node, 1, 0); /* port@1 */
+	if (!endpoint)
+		return 0;
+
+	cnt = of_property_count_u64_elems(endpoint, "link-frequencies");
+
+	if (cnt > 0)
+		of_property_read_u64_index(endpoint, "link-frequencies",
+						cnt - 1, &frequency);
+	of_node_put(endpoint);
+
+	frequency /= 10;	/* from symbol rate to link rate */
+	frequency /= 1000;	/* kbytes */
+
+	return frequency;
+}
+
 static int dp_parser_misc(struct dp_parser *parser)
 {
 	struct device_node *of_node = parser->pdev->dev.of_node;
@@ -113,6 +136,10 @@ static int dp_parser_misc(struct dp_parser *parser)
 			parser->max_dp_lanes = DP_MAX_NUM_DP_LANES; /* 4 lanes */
 	}
 
+	parser->max_dp_link_rate = dp_parser_link_frequencies(of_node);
+	if (!parser->max_dp_link_rate)
+                parser->max_dp_link_rate = DP_LINK_RATE_HBR2;
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
index 866c1a8..526131ee 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.h
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -15,6 +15,7 @@
 #define DP_LABEL "MDSS DP DISPLAY"
 #define DP_MAX_PIXEL_CLK_KHZ	675000
 #define DP_MAX_NUM_DP_LANES	4
+#define DP_LINK_RATE_HBR2	540000 /* kbytes */
 
 enum dp_pm_type {
 	DP_CORE_PM,
@@ -119,6 +120,7 @@ struct dp_parser {
 	struct dp_io io;
 	struct dp_display_data disp_data;
 	u32 max_dp_lanes;
+	u32 max_dp_link_rate;
 	struct drm_bridge *next_bridge;
 
 	int (*parse)(struct dp_parser *parser);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 4/5] drm/msm/dp: parser link-frequencies as property of dp_out endpoint

[Kuogee Hsieh]

Add capability to parser and retrieve max DP link supported rate from
link-frequencies property of dp_out endpoint.

Changes in v6:
-- second patch after split parser patch into two patches

Changes in v7:
-- without checking cnt against DP_MAX_NUM_DP_LANES to retrieve link rate

Changes in v9:
-- separate parser link-frequencies out of data-lanes

Changes in v10:
-- add dp_parser_link_frequencies()

Changes in v11:
-- return 0 if(!endpoint)

Changes in v12:
-- replace khz with kbytes at dp_parser.h

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_parser.c | 27 +++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_parser.h |  2 ++
 2 files changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index b5f7e70..5549495 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -91,6 +91,29 @@ static int dp_parser_ctrl_res(struct dp_parser *parser)
 	return 0;
 }
 
+static u32 dp_parser_link_frequencies(struct device_node *of_node)
+{
+	struct device_node *endpoint;
+	u64 frequency = 0;
+	int cnt = 0;
+
+	endpoint = of_graph_get_endpoint_by_regs(of_node, 1, 0); /* port@1 */
+	if (!endpoint)
+		return 0;
+
+	cnt = of_property_count_u64_elems(endpoint, "link-frequencies");
+
+	if (cnt > 0)
+		of_property_read_u64_index(endpoint, "link-frequencies",
+						cnt - 1, &frequency);
+	of_node_put(endpoint);
+
+	frequency /= 10;	/* from symbol rate to link rate */
+	frequency /= 1000;	/* kbytes */
+
+	return frequency;
+}
+
 static int dp_parser_misc(struct dp_parser *parser)
 {
 	struct device_node *of_node = parser->pdev->dev.of_node;
@@ -113,6 +136,10 @@ static int dp_parser_misc(struct dp_parser *parser)
 			parser->max_dp_lanes = DP_MAX_NUM_DP_LANES; /* 4 lanes */
 	}
 
+	parser->max_dp_link_rate = dp_parser_link_frequencies(of_node);
+	if (!parser->max_dp_link_rate)
+                parser->max_dp_link_rate = DP_LINK_RATE_HBR2;
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
index 866c1a8..526131ee 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.h
+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
@@ -15,6 +15,7 @@
 #define DP_LABEL "MDSS DP DISPLAY"
 #define DP_MAX_PIXEL_CLK_KHZ	675000
 #define DP_MAX_NUM_DP_LANES	4
+#define DP_LINK_RATE_HBR2	540000 /* kbytes */
 
 enum dp_pm_type {
 	DP_CORE_PM,
@@ -119,6 +120,7 @@ struct dp_parser {
 	struct dp_io io;
 	struct dp_display_data disp_data;
 	u32 max_dp_lanes;
+	u32 max_dp_link_rate;
 	struct drm_bridge *next_bridge;
 
 	int (*parse)(struct dp_parser *parser);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 5/5] drm/msm/dp: add support of max dp link rate

[Kuogee Hsieh]

By default, HBR2 (5.4G) is the max link link be supported. This patch uses the
actual limit specified by DT and removes the artificial limitation to 5.4 Gbps.
Supporting HBR3 is a consequence of that.

Changes in v2:
-- add max link rate from dtsi

Changes in v3:
-- parser max_data_lanes and max_dp_link_rate from dp_out endpoint

Changes in v4:
-- delete unnecessary pr_err

Changes in v5:
-- split parser function into different patch

Changes in v9:
-- revised commit test

Changes in v13:
-- repalced "properity" with "property"

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 4 ++++
 drivers/gpu/drm/msm/dp/dp_panel.c   | 7 ++++---
 drivers/gpu/drm/msm/dp/dp_panel.h   | 1 +
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index bfd0aef..edee550 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -390,6 +390,10 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
 	struct edid *edid;
 
 	dp->panel->max_dp_lanes = dp->parser->max_dp_lanes;
+	dp->panel->max_dp_link_rate = dp->parser->max_dp_link_rate;
+
+	drm_dbg_dp(dp->drm_dev, "max_lanes=%d max_link_rate=%d\n",
+		dp->panel->max_dp_lanes, dp->panel->max_dp_link_rate);
 
 	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
 	if (rc)
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 5149ceb..1800d89 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -75,12 +75,13 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
 	link_info->rate = drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]);
 	link_info->num_lanes = dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK;
 
+	/* Limit data lanes from data-lanes of endpoint property of dtsi */
 	if (link_info->num_lanes > dp_panel->max_dp_lanes)
 		link_info->num_lanes = dp_panel->max_dp_lanes;
 
-	/* Limit support upto HBR2 until HBR3 support is added */
-	if (link_info->rate >= (drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4)))
-		link_info->rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4);
+	/* Limit link rate from link-frequencies of endpoint property of dtsi */
+	if (link_info->rate > dp_panel->max_dp_link_rate)
+		link_info->rate = dp_panel->max_dp_link_rate;
 
 	drm_dbg_dp(panel->drm_dev, "version: %d.%d\n", major, minor);
 	drm_dbg_dp(panel->drm_dev, "link_rate=%d\n", link_info->rate);
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
index d861197a..f04d021 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.h
+++ b/drivers/gpu/drm/msm/dp/dp_panel.h
@@ -50,6 +50,7 @@ struct dp_panel {
 
 	u32 vic;
 	u32 max_dp_lanes;
+	u32 max_dp_link_rate;
 
 	u32 max_bw_code;
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v13 5/5] drm/msm/dp: add support of max dp link rate

[Kuogee Hsieh]

By default, HBR2 (5.4G) is the max link link be supported. This patch uses the
actual limit specified by DT and removes the artificial limitation to 5.4 Gbps.
Supporting HBR3 is a consequence of that.

Changes in v2:
-- add max link rate from dtsi

Changes in v3:
-- parser max_data_lanes and max_dp_link_rate from dp_out endpoint

Changes in v4:
-- delete unnecessary pr_err

Changes in v5:
-- split parser function into different patch

Changes in v9:
-- revised commit test

Changes in v13:
-- repalced "properity" with "property"

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 4 ++++
 drivers/gpu/drm/msm/dp/dp_panel.c   | 7 ++++---
 drivers/gpu/drm/msm/dp/dp_panel.h   | 1 +
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index bfd0aef..edee550 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -390,6 +390,10 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
 	struct edid *edid;
 
 	dp->panel->max_dp_lanes = dp->parser->max_dp_lanes;
+	dp->panel->max_dp_link_rate = dp->parser->max_dp_link_rate;
+
+	drm_dbg_dp(dp->drm_dev, "max_lanes=%d max_link_rate=%d\n",
+		dp->panel->max_dp_lanes, dp->panel->max_dp_link_rate);
 
 	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
 	if (rc)
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 5149ceb..1800d89 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -75,12 +75,13 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
 	link_info->rate = drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]);
 	link_info->num_lanes = dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK;
 
+	/* Limit data lanes from data-lanes of endpoint property of dtsi */
 	if (link_info->num_lanes > dp_panel->max_dp_lanes)
 		link_info->num_lanes = dp_panel->max_dp_lanes;
 
-	/* Limit support upto HBR2 until HBR3 support is added */
-	if (link_info->rate >= (drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4)))
-		link_info->rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4);
+	/* Limit link rate from link-frequencies of endpoint property of dtsi */
+	if (link_info->rate > dp_panel->max_dp_link_rate)
+		link_info->rate = dp_panel->max_dp_link_rate;
 
 	drm_dbg_dp(panel->drm_dev, "version: %d.%d\n", major, minor);
 	drm_dbg_dp(panel->drm_dev, "link_rate=%d\n", link_info->rate);
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
index d861197a..f04d021 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.h
+++ b/drivers/gpu/drm/msm/dp/dp_panel.h
@@ -50,6 +50,7 @@ struct dp_panel {
 
 	u32 vic;
 	u32 max_dp_lanes;
+	u32 max_dp_link_rate;
 
 	u32 max_bw_code;
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v13 2/5] dt-bindings: msm/dp: add data-lanes and link-frequencies property

[Rob Herring]

On Tue, Dec 13, 2022 at 02:56:18PM -0800, Kuogee Hsieh wrote:
> Add both data-lanes and link-frequencies property into endpoint
> 
> Changes in v7:
> -- split yaml out of dtsi patch
> -- link-frequencies from link rate to symbol rate
> -- deprecation of old data-lanes property
> 
> Changes in v8:
> -- correct Bjorn mail address to kernel.org
> 
> Changes in v10:
> -- add menu item to data-lanes and link-frequecnis
> 
> Changes in v11:
> -- add endpoint property at port@1
> 
> Changes in v12:
> -- use enum for item at data-lanes and link-frequencies
> 
> Changes in v13:
> -- revised changes at port@0
> -- use correct ref schemas for both port@0 and port@1
> -- mark both port@0 and port@1 are required
> -- add line between data-lanes and link-frequencies properties
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>`
> ---
>  .../bindings/display/msm/dp-controller.yaml        | 26 ++++++++++++++++++++--
>  1 file changed, 24 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> index f2515af..9d002de 100644
> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> @@ -81,6 +81,7 @@ properties:
>  
>    data-lanes:
>      $ref: /schemas/types.yaml#/definitions/uint32-array
> +    deprecated: true
>      minItems: 1
>      maxItems: 4
>      items:
> @@ -98,12 +99,31 @@ properties:
>      $ref: /schemas/graph.yaml#/properties/ports
>      properties:
>        port@0:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: "/schemas/graph.yaml#/$defs/port-base"

This means you have extra properties to add in the endpoint, but you 
didn't define any.

>          description: Input endpoint of the controller
>  
>        port@1:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: "/schemas/graph.yaml#/$defs/port-base"

Don't need quotes. Why did you add them?

>          description: Output endpoint of the controller
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum: [ 0, 1, 2, 3 ]
> +
> +              link-frequencies:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
> +
> +    required:
> +      - port@0
> +      - port@1
>  
>  required:
>    - compatible
> @@ -193,6 +213,8 @@ examples:
>                  reg = <1>;
>                  endpoint {
>                      remote-endpoint = <&typec>;
> +                    data-lanes = <0 1>;
> +                    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 
>                  };
>              };
>          };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
> 

Re: [PATCH v13 2/5] dt-bindings: msm/dp: add data-lanes and link-frequencies property

[Rob Herring]

On Tue, Dec 13, 2022 at 02:56:18PM -0800, Kuogee Hsieh wrote:
> Add both data-lanes and link-frequencies property into endpoint
> 
> Changes in v7:
> -- split yaml out of dtsi patch
> -- link-frequencies from link rate to symbol rate
> -- deprecation of old data-lanes property
> 
> Changes in v8:
> -- correct Bjorn mail address to kernel.org
> 
> Changes in v10:
> -- add menu item to data-lanes and link-frequecnis
> 
> Changes in v11:
> -- add endpoint property at port@1
> 
> Changes in v12:
> -- use enum for item at data-lanes and link-frequencies
> 
> Changes in v13:
> -- revised changes at port@0
> -- use correct ref schemas for both port@0 and port@1
> -- mark both port@0 and port@1 are required
> -- add line between data-lanes and link-frequencies properties
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>`
> ---
>  .../bindings/display/msm/dp-controller.yaml        | 26 ++++++++++++++++++++--
>  1 file changed, 24 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> index f2515af..9d002de 100644
> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> @@ -81,6 +81,7 @@ properties:
>  
>    data-lanes:
>      $ref: /schemas/types.yaml#/definitions/uint32-array
> +    deprecated: true
>      minItems: 1
>      maxItems: 4
>      items:
> @@ -98,12 +99,31 @@ properties:
>      $ref: /schemas/graph.yaml#/properties/ports
>      properties:
>        port@0:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: "/schemas/graph.yaml#/$defs/port-base"

This means you have extra properties to add in the endpoint, but you 
didn't define any.

>          description: Input endpoint of the controller
>  
>        port@1:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: "/schemas/graph.yaml#/$defs/port-base"

Don't need quotes. Why did you add them?

>          description: Output endpoint of the controller
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum: [ 0, 1, 2, 3 ]
> +
> +              link-frequencies:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
> +
> +    required:
> +      - port@0
> +      - port@1
>  
>  required:
>    - compatible
> @@ -193,6 +213,8 @@ examples:
>                  reg = <1>;
>                  endpoint {
>                      remote-endpoint = <&typec>;
> +                    data-lanes = <0 1>;
> +                    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 
>                  };
>              };
>          };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
>