* [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
This patchset is based on the SM8450 display support serie at [1].
In order to work, the following patchsets are required:
- PM8550 LDO fix at [2]
- DISPCC driver at [3]
+ the DT changes.
[1] https://lore.kernel.org/all/20221207012231.112059-1-dmitry.baryshkov@linaro.org/
[2] https://lore.kernel.org/all/20230102-topic-sm8550-upstream-fixes-reg-l11b-nldo-v1-1-d97def246338@linaro.org/
[3] https://lore.kernel.org/all/20230103-topic-sm8550-upstream-dispcc-v2-0-786ddd8785a2@linaro.org
To: Rob Clark <robdclark@gmail.com>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Sean Paul <sean@poorly.run>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Patch 1,2,3: Added Acked-by/Reviewed-by
- Patch 6: Fixed compatible to qcom,sm8550-dsi-phy-4nm
- Link to v2: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v2-0-87f1c16d7635@linaro.org
Changes in v2:
- Rebased on msm-next-lumag & msm-next-lumag-dpu
- Fixed cover letter title to SM8550
- Patch 1: renamed compatible to qcom,sm8550-dsi-phy-4nm
- Patch 2: split in 2 patches, switch to renamed qcom,sm8550-dsi-phy-4nm
- Patch 3: switch CTL to use CTL_SC7280_MASK, Added Reviewed-by
- Patch 4: Added Reviewed-by
- Patch 5: fixed V5.2 quirk order
- Patch 6: Added Reviewed-by
- Link to v1: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v1-0-9ccd7e652fcd@linaro.org
---
Neil Armstrong (7):
dt-bindings: display/msm: document the SM8550 DSI PHY
dt-bindings: display/msm: document DPU on SM8550
dt-bindings: display/msm: document MDSS on SM8550
drm/msm/dpu: add support for SM8550
drm/msm: mdss: add support for SM8550
drm/msm/dsi: add support for DSI-PHY on SM8550
drm/msm/dsi: add support for DSI 2.7.0
.../bindings/display/msm/dsi-phy-7nm.yaml | 1 +
.../bindings/display/msm/qcom,sm8550-dpu.yaml | 134 +++++++++
.../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
drivers/gpu/drm/msm/Kconfig | 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 ++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 16 +
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 88 +++++-
drivers/gpu/drm/msm/msm_mdss.c | 2 +
14 files changed, 765 insertions(+), 16 deletions(-)
---
base-commit: 58372c69004c06773cbe74a05f2c1a4a8b23db9c
change-id: 20230103-topic-sm8550-upstream-mdss-dsi-35ca8acea529
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v3 1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 10:15 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
Document the SM8550 DSI PHY which is very close from the 7nm
and 5nm DSI PHYs found in earlier platforms.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index 299751a9caea..78ab8c410ccd 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -20,6 +20,7 @@ properties:
- qcom,sc7280-dsi-phy-7nm
- qcom,sm8350-dsi-phy-5nm
- qcom,sm8450-dsi-phy-5nm
+ - qcom,sm8550-dsi-phy-4nm
reg:
items:
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
This patchset is based on the SM8450 display support serie at [1].
In order to work, the following patchsets are required:
- PM8550 LDO fix at [2]
- DISPCC driver at [3]
+ the DT changes.
[1] https://lore.kernel.org/all/20221207012231.112059-1-dmitry.baryshkov@linaro.org/
[2] https://lore.kernel.org/all/20230102-topic-sm8550-upstream-fixes-reg-l11b-nldo-v1-1-d97def246338@linaro.org/
[3] https://lore.kernel.org/all/20230103-topic-sm8550-upstream-dispcc-v2-0-786ddd8785a2@linaro.org
To: Rob Clark <robdclark@gmail.com>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Sean Paul <sean@poorly.run>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Patch 1,2,3: Added Acked-by/Reviewed-by
- Patch 6: Fixed compatible to qcom,sm8550-dsi-phy-4nm
- Link to v2: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v2-0-87f1c16d7635@linaro.org
Changes in v2:
- Rebased on msm-next-lumag & msm-next-lumag-dpu
- Fixed cover letter title to SM8550
- Patch 1: renamed compatible to qcom,sm8550-dsi-phy-4nm
- Patch 2: split in 2 patches, switch to renamed qcom,sm8550-dsi-phy-4nm
- Patch 3: switch CTL to use CTL_SC7280_MASK, Added Reviewed-by
- Patch 4: Added Reviewed-by
- Patch 5: fixed V5.2 quirk order
- Patch 6: Added Reviewed-by
- Link to v1: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v1-0-9ccd7e652fcd@linaro.org
---
Neil Armstrong (7):
dt-bindings: display/msm: document the SM8550 DSI PHY
dt-bindings: display/msm: document DPU on SM8550
dt-bindings: display/msm: document MDSS on SM8550
drm/msm/dpu: add support for SM8550
drm/msm: mdss: add support for SM8550
drm/msm/dsi: add support for DSI-PHY on SM8550
drm/msm/dsi: add support for DSI 2.7.0
.../bindings/display/msm/dsi-phy-7nm.yaml | 1 +
.../bindings/display/msm/qcom,sm8550-dpu.yaml | 134 +++++++++
.../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
drivers/gpu/drm/msm/Kconfig | 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 ++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 16 +
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 88 +++++-
drivers/gpu/drm/msm/msm_mdss.c | 2 +
14 files changed, 765 insertions(+), 16 deletions(-)
---
base-commit: 58372c69004c06773cbe74a05f2c1a4a8b23db9c
change-id: 20230103-topic-sm8550-upstream-mdss-dsi-35ca8acea529
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v3 1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
Document the SM8550 DSI PHY which is very close from the 7nm
and 5nm DSI PHYs found in earlier platforms.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index 299751a9caea..78ab8c410ccd 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -20,6 +20,7 @@ properties:
- qcom,sc7280-dsi-phy-7nm
- qcom,sm8350-dsi-phy-5nm
- qcom,sm8450-dsi-phy-5nm
+ - qcom,sm8550-dsi-phy-4nm
reg:
items:
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 2/7] dt-bindings: display/msm: document DPU on SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 10:15 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
Document the DPU hardware found on the Qualcomm SM8550 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/display/msm/qcom,sm8550-dpu.yaml | 134 +++++++++++++++++++++
1 file changed, 134 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
new file mode 100644
index 000000000000..c3d5a98fe3c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display DPU
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8550-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf axi
+ - description: Display MDSS ahb
+ - description: Display lut
+ - description: Display core
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8550.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8550-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 2/7] dt-bindings: display/msm: document DPU on SM8550
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
Document the DPU hardware found on the Qualcomm SM8550 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/display/msm/qcom,sm8550-dpu.yaml | 134 +++++++++++++++++++++
1 file changed, 134 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
new file mode 100644
index 000000000000..c3d5a98fe3c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display DPU
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8550-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf axi
+ - description: Display MDSS ahb
+ - description: Display lut
+ - description: Display core
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8550.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8550-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 10:15 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
Document the MDSS hardware found on the Qualcomm SM8550 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
1 file changed, 331 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
new file mode 100644
index 000000000000..6286e08bb941
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -0,0 +1,331 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display MDSS
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+ SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8550-mdss
+
+ clocks:
+ items:
+ - description: Display MDSS AHB
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8550-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8550-dsi-phy-4nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8550.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8550-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+ <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8550-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-4nm-8550";
+ reg = <0x0ae95000 0x200>,
+ <0x0ae95200 0x280>,
+ <0x0ae95500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-4nm-8550";
+ reg = <0x0ae97000 0x200>,
+ <0x0ae97200 0x280>,
+ <0x0ae97500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
Document the MDSS hardware found on the Qualcomm SM8550 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
1 file changed, 331 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
new file mode 100644
index 000000000000..6286e08bb941
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -0,0 +1,331 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display MDSS
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+ SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8550-mdss
+
+ clocks:
+ items:
+ - description: Display MDSS AHB
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8550-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8550-dsi-phy-4nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8550.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8550-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+ <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8550-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-4nm-8550";
+ reg = <0x0ae95000 0x200>,
+ <0x0ae95200 0x280>,
+ <0x0ae95500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8550_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-4nm-8550";
+ reg = <0x0ae97000 0x200>,
+ <0x0ae97200 0x280>,
+ <0x0ae97500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 4/7] drm/msm/dpu: add support for SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 10:15 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
Add definitions for the display hardware used on Qualcomm SM8550
platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
4 files changed, 201 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 42e72ee7aa5e..4449e2f5739c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -472,6 +472,20 @@ static const struct dpu_caps sm8450_dpu_caps = {
.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
};
+static const struct dpu_caps sm8550_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0xb,
+ .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .ubwc_version = DPU_HW_UBWC_VER_40,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 5120,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
static const struct dpu_mdp_cfg msm8998_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -699,6 +713,37 @@ static const struct dpu_mdp_cfg sm8450_mdp[] = {
},
};
+static const struct dpu_mdp_cfg sm8550_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0, .len = 0x494,
+ .features = BIT(DPU_MDP_PERIPH_0_REMOVED),
+ .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+ .reg_off = 0x4330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
+ .reg_off = 0x6330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
+ .reg_off = 0x8330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
+ .reg_off = 0xa330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+ .reg_off = 0x24330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
+ .reg_off = 0x26330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA2] = {
+ .reg_off = 0x28330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA3] = {
+ .reg_off = 0x2a330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
+ .reg_off = 0x2c330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+ .reg_off = 0x2e330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
+ .reg_off = 0x2bc, .bit_off = 20},
+ },
+};
+
static const struct dpu_mdp_cfg qcm2290_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -985,6 +1030,45 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = {
},
};
+static const struct dpu_ctl_cfg sm8550_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x15000, .len = 0x290,
+ .features = CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x16000, .len = 0x290,
+ .features = CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x17000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x18000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+ {
+ .name = "ctl_4", .id = CTL_4,
+ .base = 0x19000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+ },
+ {
+ .name = "ctl_5", .id = CTL_5,
+ .base = 0x1a000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+ },
+};
+
static const struct dpu_ctl_cfg qcm2290_ctl[] = {
{
.name = "ctl_0", .id = CTL_0,
@@ -1269,6 +1353,40 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = {
sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_0 =
+ _VIG_SBLK("0", 7, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_1 =
+ _VIG_SBLK("1", 8, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_2 =
+ _VIG_SBLK("2", 9, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_3 =
+ _VIG_SBLK("3", 10, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_dma_sblk_4 = _DMA_SBLK("12", 5);
+static const struct dpu_sspp_sub_blks sd8550_dma_sblk_5 = _DMA_SBLK("13", 6);
+
+static const struct dpu_sspp_cfg sm8550_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
+ SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
+ SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2),
+ SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA3),
+ SSPP_BLK("sspp_12", SSPP_DMA4, 0x2c000, DMA_CURSOR_SDM845_MASK,
+ sm8550_dma_sblk_4, 14, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+ SSPP_BLK("sspp_13", SSPP_DMA5, 0x2e000, DMA_CURSOR_SDM845_MASK,
+ sd8550_dma_sblk_5, 15, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+};
+
static const struct dpu_sspp_cfg qcm2290_sspp[] = {
SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_QCM2290_MASK,
qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
@@ -1480,6 +1598,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
.len = 0x20, .version = 0x20000},
};
+#define PP_BLK_DIPHER(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \
+ {\
+ .name = _name, .id = _id, \
+ .base = _base, .len = 0, \
+ .features = BIT(DPU_PINGPONG_DITHER), \
+ .merge_3d = _merge_3d, \
+ .sblk = &_sblk, \
+ .intr_done = _done, \
+ .intr_rdptr = _rdptr, \
+ }
#define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \
{\
.name = _name, .id = _id, \
@@ -1613,6 +1741,33 @@ static const struct dpu_pingpong_cfg sm8450_pp[] = {
-1),
};
+static const struct dpu_pingpong_cfg sm8550_pp[] = {
+ PP_BLK_DIPHER("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ -1),
+ PP_BLK_DIPHER("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ -1),
+ PP_BLK_DIPHER("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+ -1),
+ PP_BLK_DIPHER("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+ -1),
+ PP_BLK_DIPHER("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+ -1),
+ PP_BLK_DIPHER("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+ -1),
+ PP_BLK_DIPHER("pingpong_6", PINGPONG_6, 0x66000, MERGE_3D_3, sc7280_pp_sblk,
+ -1,
+ -1),
+ PP_BLK_DIPHER("pingpong_7", PINGPONG_7, 0x66400, MERGE_3D_3, sc7280_pp_sblk,
+ -1,
+ -1),
+};
+
static struct dpu_pingpong_cfg qcm2290_pp[] = {
PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1649,6 +1804,13 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
};
+static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = {
+ MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
+ MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
+ MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
+ MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700),
+};
+
/*************************************************************
* DSC sub blocks config
*************************************************************/
@@ -1755,6 +1917,14 @@ static const struct dpu_intf_cfg sm8450_intf[] = {
INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
};
+static const struct dpu_intf_cfg sm8550_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+ /* TODO TE sub-blocks for intf1 & intf2 */
+ INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+ INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
+ INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+};
+
static const struct dpu_intf_cfg qcm2290_intf[] = {
INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -2614,6 +2784,32 @@ static const struct dpu_mdss_cfg sm8450_dpu_cfg = {
.mdss_irqs = IRQ_SM8450_MASK,
};
+static const struct dpu_mdss_cfg sm8550_dpu_cfg = {
+ .caps = &sm8550_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sm8550_mdp),
+ .mdp = sm8550_mdp,
+ .ctl_count = ARRAY_SIZE(sm8550_ctl),
+ .ctl = sm8550_ctl,
+ .sspp_count = ARRAY_SIZE(sm8550_sspp),
+ .sspp = sm8550_sspp,
+ .mixer_count = ARRAY_SIZE(sm8150_lm),
+ .mixer = sm8150_lm,
+ .dspp_count = ARRAY_SIZE(sm8150_dspp),
+ .dspp = sm8150_dspp,
+ .pingpong_count = ARRAY_SIZE(sm8550_pp),
+ .pingpong = sm8550_pp,
+ .merge_3d_count = ARRAY_SIZE(sm8550_merge_3d),
+ .merge_3d = sm8550_merge_3d,
+ .intf_count = ARRAY_SIZE(sm8550_intf),
+ .intf = sm8550_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .reg_dma_count = 1,
+ .dma_cfg = &sm8450_regdma,
+ .perf = &sm8450_perf_data,
+ .mdss_irqs = IRQ_SM8450_MASK,
+};
+
static const struct dpu_mdss_cfg qcm2290_dpu_cfg = {
.caps = &qcm2290_dpu_caps,
.mdp_count = ARRAY_SIZE(qcm2290_mdp),
@@ -2654,6 +2850,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
{ .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
{ .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg},
+ { .hw_rev = DPU_HW_VER_900, .dpu_cfg = &sm8550_dpu_cfg},
};
const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index ebcdd8405cab..e9a90c8763ff 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -50,6 +50,7 @@
#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
#define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
+#define DPU_HW_VER_900 DPU_HW_VER(9, 0, 0) /* sm8550 */
#define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
#define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index 2b9e15f99c65..2d9192a6ce00 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -120,6 +120,8 @@ enum dpu_sspp {
SSPP_DMA1,
SSPP_DMA2,
SSPP_DMA3,
+ SSPP_DMA4,
+ SSPP_DMA5,
SSPP_CURSOR0,
SSPP_CURSOR1,
SSPP_MAX
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 84a46319421a..6759c6d88083 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1313,6 +1313,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sm8250-dpu", },
{ .compatible = "qcom,sm8350-dpu", },
{ .compatible = "qcom,sm8450-dpu", },
+ { .compatible = "qcom,sm8550-dpu", },
{}
};
MODULE_DEVICE_TABLE(of, dpu_dt_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 4/7] drm/msm/dpu: add support for SM8550
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
Add definitions for the display hardware used on Qualcomm SM8550
platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 197 +++++++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
4 files changed, 201 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 42e72ee7aa5e..4449e2f5739c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -472,6 +472,20 @@ static const struct dpu_caps sm8450_dpu_caps = {
.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
};
+static const struct dpu_caps sm8550_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0xb,
+ .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .ubwc_version = DPU_HW_UBWC_VER_40,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 5120,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
static const struct dpu_mdp_cfg msm8998_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -699,6 +713,37 @@ static const struct dpu_mdp_cfg sm8450_mdp[] = {
},
};
+static const struct dpu_mdp_cfg sm8550_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0, .len = 0x494,
+ .features = BIT(DPU_MDP_PERIPH_0_REMOVED),
+ .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+ .reg_off = 0x4330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
+ .reg_off = 0x6330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
+ .reg_off = 0x8330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
+ .reg_off = 0xa330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+ .reg_off = 0x24330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
+ .reg_off = 0x26330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA2] = {
+ .reg_off = 0x28330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA3] = {
+ .reg_off = 0x2a330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
+ .reg_off = 0x2c330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+ .reg_off = 0x2e330, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
+ .reg_off = 0x2bc, .bit_off = 20},
+ },
+};
+
static const struct dpu_mdp_cfg qcm2290_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -985,6 +1030,45 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = {
},
};
+static const struct dpu_ctl_cfg sm8550_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x15000, .len = 0x290,
+ .features = CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x16000, .len = 0x290,
+ .features = CTL_SC7280_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x17000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x18000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+ {
+ .name = "ctl_4", .id = CTL_4,
+ .base = 0x19000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+ },
+ {
+ .name = "ctl_5", .id = CTL_5,
+ .base = 0x1a000, .len = 0x290,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+ },
+};
+
static const struct dpu_ctl_cfg qcm2290_ctl[] = {
{
.name = "ctl_0", .id = CTL_0,
@@ -1269,6 +1353,40 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = {
sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_0 =
+ _VIG_SBLK("0", 7, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_1 =
+ _VIG_SBLK("1", 8, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_2 =
+ _VIG_SBLK("2", 9, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_vig_sblk_3 =
+ _VIG_SBLK("3", 10, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sm8550_dma_sblk_4 = _DMA_SBLK("12", 5);
+static const struct dpu_sspp_sub_blks sd8550_dma_sblk_5 = _DMA_SBLK("13", 6);
+
+static const struct dpu_sspp_cfg sm8550_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
+ SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
+ SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SC7180_MASK,
+ sm8550_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2),
+ SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA3),
+ SSPP_BLK("sspp_12", SSPP_DMA4, 0x2c000, DMA_CURSOR_SDM845_MASK,
+ sm8550_dma_sblk_4, 14, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+ SSPP_BLK("sspp_13", SSPP_DMA5, 0x2e000, DMA_CURSOR_SDM845_MASK,
+ sd8550_dma_sblk_5, 15, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+};
+
static const struct dpu_sspp_cfg qcm2290_sspp[] = {
SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_QCM2290_MASK,
qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
@@ -1480,6 +1598,16 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
.len = 0x20, .version = 0x20000},
};
+#define PP_BLK_DIPHER(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \
+ {\
+ .name = _name, .id = _id, \
+ .base = _base, .len = 0, \
+ .features = BIT(DPU_PINGPONG_DITHER), \
+ .merge_3d = _merge_3d, \
+ .sblk = &_sblk, \
+ .intr_done = _done, \
+ .intr_rdptr = _rdptr, \
+ }
#define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \
{\
.name = _name, .id = _id, \
@@ -1613,6 +1741,33 @@ static const struct dpu_pingpong_cfg sm8450_pp[] = {
-1),
};
+static const struct dpu_pingpong_cfg sm8550_pp[] = {
+ PP_BLK_DIPHER("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ -1),
+ PP_BLK_DIPHER("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ -1),
+ PP_BLK_DIPHER("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+ -1),
+ PP_BLK_DIPHER("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+ -1),
+ PP_BLK_DIPHER("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+ -1),
+ PP_BLK_DIPHER("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sc7280_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+ -1),
+ PP_BLK_DIPHER("pingpong_6", PINGPONG_6, 0x66000, MERGE_3D_3, sc7280_pp_sblk,
+ -1,
+ -1),
+ PP_BLK_DIPHER("pingpong_7", PINGPONG_7, 0x66400, MERGE_3D_3, sc7280_pp_sblk,
+ -1,
+ -1),
+};
+
static struct dpu_pingpong_cfg qcm2290_pp[] = {
PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1649,6 +1804,13 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
};
+static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = {
+ MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
+ MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
+ MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
+ MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700),
+};
+
/*************************************************************
* DSC sub blocks config
*************************************************************/
@@ -1755,6 +1917,14 @@ static const struct dpu_intf_cfg sm8450_intf[] = {
INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
};
+static const struct dpu_intf_cfg sm8550_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+ /* TODO TE sub-blocks for intf1 & intf2 */
+ INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+ INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
+ INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+};
+
static const struct dpu_intf_cfg qcm2290_intf[] = {
INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -2614,6 +2784,32 @@ static const struct dpu_mdss_cfg sm8450_dpu_cfg = {
.mdss_irqs = IRQ_SM8450_MASK,
};
+static const struct dpu_mdss_cfg sm8550_dpu_cfg = {
+ .caps = &sm8550_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sm8550_mdp),
+ .mdp = sm8550_mdp,
+ .ctl_count = ARRAY_SIZE(sm8550_ctl),
+ .ctl = sm8550_ctl,
+ .sspp_count = ARRAY_SIZE(sm8550_sspp),
+ .sspp = sm8550_sspp,
+ .mixer_count = ARRAY_SIZE(sm8150_lm),
+ .mixer = sm8150_lm,
+ .dspp_count = ARRAY_SIZE(sm8150_dspp),
+ .dspp = sm8150_dspp,
+ .pingpong_count = ARRAY_SIZE(sm8550_pp),
+ .pingpong = sm8550_pp,
+ .merge_3d_count = ARRAY_SIZE(sm8550_merge_3d),
+ .merge_3d = sm8550_merge_3d,
+ .intf_count = ARRAY_SIZE(sm8550_intf),
+ .intf = sm8550_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .reg_dma_count = 1,
+ .dma_cfg = &sm8450_regdma,
+ .perf = &sm8450_perf_data,
+ .mdss_irqs = IRQ_SM8450_MASK,
+};
+
static const struct dpu_mdss_cfg qcm2290_dpu_cfg = {
.caps = &qcm2290_dpu_caps,
.mdp_count = ARRAY_SIZE(qcm2290_mdp),
@@ -2654,6 +2850,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
{ .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
{ .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg},
+ { .hw_rev = DPU_HW_VER_900, .dpu_cfg = &sm8550_dpu_cfg},
};
const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index ebcdd8405cab..e9a90c8763ff 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -50,6 +50,7 @@
#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
#define DPU_HW_VER_800 DPU_HW_VER(8, 0, 0) /* sc8280xp */
#define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
+#define DPU_HW_VER_900 DPU_HW_VER(9, 0, 0) /* sm8550 */
#define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
#define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index 2b9e15f99c65..2d9192a6ce00 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -120,6 +120,8 @@ enum dpu_sspp {
SSPP_DMA1,
SSPP_DMA2,
SSPP_DMA3,
+ SSPP_DMA4,
+ SSPP_DMA5,
SSPP_CURSOR0,
SSPP_CURSOR1,
SSPP_MAX
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 84a46319421a..6759c6d88083 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1313,6 +1313,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sm8250-dpu", },
{ .compatible = "qcom,sm8350-dpu", },
{ .compatible = "qcom,sm8450-dpu", },
+ { .compatible = "qcom,sm8550-dpu", },
{}
};
MODULE_DEVICE_TABLE(of, dpu_dt_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 5/7] drm/msm: mdss: add support for SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 10:15 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
Add support for the MDSS block on SM8550 platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/msm_mdss.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index f9ef5085041d..02646e4bb4cd 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -297,6 +297,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 2, 1);
break;
case DPU_HW_VER_810:
+ case DPU_HW_VER_900:
/* TODO: highest_bank_bit = 2 for LP_DDR4 */
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 3, 1);
break;
@@ -532,6 +533,7 @@ static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,sm8250-mdss" },
{ .compatible = "qcom,sm8350-mdss" },
{ .compatible = "qcom,sm8450-mdss" },
+ { .compatible = "qcom,sm8550-mdss" },
{}
};
MODULE_DEVICE_TABLE(of, mdss_dt_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 5/7] drm/msm: mdss: add support for SM8550
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
Add support for the MDSS block on SM8550 platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/msm_mdss.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index f9ef5085041d..02646e4bb4cd 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -297,6 +297,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 2, 1);
break;
case DPU_HW_VER_810:
+ case DPU_HW_VER_900:
/* TODO: highest_bank_bit = 2 for LP_DDR4 */
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 3, 1);
break;
@@ -532,6 +533,7 @@ static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,sm8250-mdss" },
{ .compatible = "qcom,sm8350-mdss" },
{ .compatible = "qcom,sm8450-mdss" },
+ { .compatible = "qcom,sm8550-mdss" },
{}
};
MODULE_DEVICE_TABLE(of, mdss_dt_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 10:15 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
SM8550 use a 4nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle
4nm variant inside the common 5+7nm driver.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/gpu/drm/msm/Kconfig | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 88 ++++++++++++++++++++++++++-----
4 files changed, 79 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index e7b100d97f88..949b18a29a55 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -140,11 +140,11 @@ config DRM_MSM_DSI_10NM_PHY
Choose this option if DSI PHY on SDM845 is used on the platform.
config DRM_MSM_DSI_7NM_PHY
- bool "Enable DSI 7nm/5nm PHY driver in MSM DRM"
+ bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM"
depends on DRM_MSM_DSI
default y
help
- Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280
+ Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SM8550/SC7280
is used on the platform.
config DRM_MSM_HDMI
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 04126af74bb5..cbe669fca26d 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -573,6 +573,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_5nm_8350_cfgs },
{ .compatible = "qcom,sm8450-dsi-phy-5nm",
.data = &dsi_phy_5nm_8450_cfgs },
+ { .compatible = "qcom,sm8550-dsi-phy-4nm",
+ .data = &dsi_phy_4nm_8550_cfgs },
#endif
{}
};
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index f7a907ed2b4b..58f9e09f5224 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
struct msm_dsi_dphy_timing {
u32 clk_zero;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 7b2c16b3a36c..af5c952c6ad0 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -47,6 +47,8 @@
#define DSI_PHY_7NM_QUIRK_V4_2 BIT(2)
/* Hardware is V4.3 */
#define DSI_PHY_7NM_QUIRK_V4_3 BIT(3)
+/* Hardware is V5.2 */
+#define DSI_PHY_7NM_QUIRK_V5_2 BIT(4)
struct dsi_pll_config {
bool enable_ssc;
@@ -124,14 +126,25 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)
config->pll_clock_inverters = 0x28;
- else if (pll_freq <= 1000000000ULL)
- config->pll_clock_inverters = 0xa0;
- else if (pll_freq <= 2500000000ULL)
- config->pll_clock_inverters = 0x20;
- else if (pll_freq <= 3020000000ULL)
- config->pll_clock_inverters = 0x00;
- else
- config->pll_clock_inverters = 0x40;
+ else if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+ if (pll_freq <= 1300000000ULL)
+ config->pll_clock_inverters = 0xa0;
+ else if (pll_freq <= 2500000000ULL)
+ config->pll_clock_inverters = 0x20;
+ else if (pll_freq <= 4000000000ULL)
+ config->pll_clock_inverters = 0x00;
+ else
+ config->pll_clock_inverters = 0x40;
+ } else {
+ if (pll_freq <= 1000000000ULL)
+ config->pll_clock_inverters = 0xa0;
+ else if (pll_freq <= 2500000000ULL)
+ config->pll_clock_inverters = 0x20;
+ else if (pll_freq <= 3020000000ULL)
+ config->pll_clock_inverters = 0x00;
+ else
+ config->pll_clock_inverters = 0x40;
+ }
config->decimal_div_start = dec;
config->frac_div_start = frac;
@@ -222,6 +235,13 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
vco_config_1 = 0x01;
}
+ if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+ if (pll->vco_current_rate < 1557000000ULL)
+ vco_config_1 = 0x08;
+ else
+ vco_config_1 = 0x01;
+ }
+
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
analog_controls_five_1);
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
@@ -860,7 +880,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
pr_warn("PLL turned on before configuring PHY\n");
/* Request for REFGEN READY */
- if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+ (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
dsi_phy_write(phy->base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1);
udelay(500);
}
@@ -894,7 +915,19 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
lane_ctrl0 = 0x1f;
}
- if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+ if (phy->cphy_mode) {
+ vreg_ctrl_0 = 0x45;
+ vreg_ctrl_1 = 0x45;
+ glbl_rescode_top_ctrl = 0x00;
+ glbl_rescode_bot_ctrl = 0x00;
+ } else {
+ vreg_ctrl_0 = 0x44;
+ vreg_ctrl_1 = 0x19;
+ glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c : 0x03;
+ glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3c;
+ }
+ } else if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) {
if (phy->cphy_mode) {
glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x01;
glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3b;
@@ -943,9 +976,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0x00);
/* program CMN_CTRL_4 for minor_ver 2 chipsets*/
- data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0);
- data = data & (0xf0);
- if (data == 0x20)
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2) ||
+ (dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0) & (0xf0)) == 0x20)
dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_CTRL_4, 0x04);
/* Configure PHY lane swap (TODO: we need to calculate this) */
@@ -1058,7 +1090,8 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
dsi_phy_hw_v4_0_config_lpcdrx(phy, false);
/* Turn off REFGEN Vote */
- if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+ (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x0);
wmb();
/* Delay to ensure HW removes vote before PHY shut down */
@@ -1092,6 +1125,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = {
{ .supply = "vdds", .init_load_uA = 97800 },
};
+static const struct regulator_bulk_data dsi_phy_7nm_98400uA_regulators[] = {
+ { .supply = "vdds", .init_load_uA = 98400 },
+};
+
const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
.has_phy_lane = true,
.regulator_data = dsi_phy_7nm_36mA_regulators,
@@ -1201,3 +1238,26 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
.num_dsi_phy = 2,
.quirks = DSI_PHY_7NM_QUIRK_V4_3,
};
+
+const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = {
+ .has_phy_lane = true,
+ .regulator_data = dsi_phy_7nm_98400uA_regulators,
+ .num_regulators = ARRAY_SIZE(dsi_phy_7nm_98400uA_regulators),
+ .ops = {
+ .enable = dsi_7nm_phy_enable,
+ .disable = dsi_7nm_phy_disable,
+ .pll_init = dsi_pll_7nm_init,
+ .save_pll_state = dsi_7nm_pll_save_state,
+ .restore_pll_state = dsi_7nm_pll_restore_state,
+ .set_continuous_clock = dsi_7nm_set_continuous_clock,
+ },
+ .min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+ .max_pll_rate = 5000000000UL,
+#else
+ .max_pll_rate = ULONG_MAX,
+#endif
+ .io_start = { 0xae95000, 0xae97000 },
+ .num_dsi_phy = 2,
+ .quirks = DSI_PHY_7NM_QUIRK_V5_2,
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
SM8550 use a 4nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle
4nm variant inside the common 5+7nm driver.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/gpu/drm/msm/Kconfig | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 88 ++++++++++++++++++++++++++-----
4 files changed, 79 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index e7b100d97f88..949b18a29a55 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -140,11 +140,11 @@ config DRM_MSM_DSI_10NM_PHY
Choose this option if DSI PHY on SDM845 is used on the platform.
config DRM_MSM_DSI_7NM_PHY
- bool "Enable DSI 7nm/5nm PHY driver in MSM DRM"
+ bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM"
depends on DRM_MSM_DSI
default y
help
- Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280
+ Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SM8550/SC7280
is used on the platform.
config DRM_MSM_HDMI
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 04126af74bb5..cbe669fca26d 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -573,6 +573,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_5nm_8350_cfgs },
{ .compatible = "qcom,sm8450-dsi-phy-5nm",
.data = &dsi_phy_5nm_8450_cfgs },
+ { .compatible = "qcom,sm8550-dsi-phy-4nm",
+ .data = &dsi_phy_4nm_8550_cfgs },
#endif
{}
};
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index f7a907ed2b4b..58f9e09f5224 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
struct msm_dsi_dphy_timing {
u32 clk_zero;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 7b2c16b3a36c..af5c952c6ad0 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -47,6 +47,8 @@
#define DSI_PHY_7NM_QUIRK_V4_2 BIT(2)
/* Hardware is V4.3 */
#define DSI_PHY_7NM_QUIRK_V4_3 BIT(3)
+/* Hardware is V5.2 */
+#define DSI_PHY_7NM_QUIRK_V5_2 BIT(4)
struct dsi_pll_config {
bool enable_ssc;
@@ -124,14 +126,25 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)
config->pll_clock_inverters = 0x28;
- else if (pll_freq <= 1000000000ULL)
- config->pll_clock_inverters = 0xa0;
- else if (pll_freq <= 2500000000ULL)
- config->pll_clock_inverters = 0x20;
- else if (pll_freq <= 3020000000ULL)
- config->pll_clock_inverters = 0x00;
- else
- config->pll_clock_inverters = 0x40;
+ else if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+ if (pll_freq <= 1300000000ULL)
+ config->pll_clock_inverters = 0xa0;
+ else if (pll_freq <= 2500000000ULL)
+ config->pll_clock_inverters = 0x20;
+ else if (pll_freq <= 4000000000ULL)
+ config->pll_clock_inverters = 0x00;
+ else
+ config->pll_clock_inverters = 0x40;
+ } else {
+ if (pll_freq <= 1000000000ULL)
+ config->pll_clock_inverters = 0xa0;
+ else if (pll_freq <= 2500000000ULL)
+ config->pll_clock_inverters = 0x20;
+ else if (pll_freq <= 3020000000ULL)
+ config->pll_clock_inverters = 0x00;
+ else
+ config->pll_clock_inverters = 0x40;
+ }
config->decimal_div_start = dec;
config->frac_div_start = frac;
@@ -222,6 +235,13 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
vco_config_1 = 0x01;
}
+ if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+ if (pll->vco_current_rate < 1557000000ULL)
+ vco_config_1 = 0x08;
+ else
+ vco_config_1 = 0x01;
+ }
+
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
analog_controls_five_1);
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
@@ -860,7 +880,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
pr_warn("PLL turned on before configuring PHY\n");
/* Request for REFGEN READY */
- if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+ (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
dsi_phy_write(phy->base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1);
udelay(500);
}
@@ -894,7 +915,19 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
lane_ctrl0 = 0x1f;
}
- if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+ if (phy->cphy_mode) {
+ vreg_ctrl_0 = 0x45;
+ vreg_ctrl_1 = 0x45;
+ glbl_rescode_top_ctrl = 0x00;
+ glbl_rescode_bot_ctrl = 0x00;
+ } else {
+ vreg_ctrl_0 = 0x44;
+ vreg_ctrl_1 = 0x19;
+ glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c : 0x03;
+ glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3c;
+ }
+ } else if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) {
if (phy->cphy_mode) {
glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x01;
glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3b;
@@ -943,9 +976,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0x00);
/* program CMN_CTRL_4 for minor_ver 2 chipsets*/
- data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0);
- data = data & (0xf0);
- if (data == 0x20)
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2) ||
+ (dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0) & (0xf0)) == 0x20)
dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_CTRL_4, 0x04);
/* Configure PHY lane swap (TODO: we need to calculate this) */
@@ -1058,7 +1090,8 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
dsi_phy_hw_v4_0_config_lpcdrx(phy, false);
/* Turn off REFGEN Vote */
- if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+ if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+ (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x0);
wmb();
/* Delay to ensure HW removes vote before PHY shut down */
@@ -1092,6 +1125,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = {
{ .supply = "vdds", .init_load_uA = 97800 },
};
+static const struct regulator_bulk_data dsi_phy_7nm_98400uA_regulators[] = {
+ { .supply = "vdds", .init_load_uA = 98400 },
+};
+
const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
.has_phy_lane = true,
.regulator_data = dsi_phy_7nm_36mA_regulators,
@@ -1201,3 +1238,26 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
.num_dsi_phy = 2,
.quirks = DSI_PHY_7NM_QUIRK_V4_3,
};
+
+const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = {
+ .has_phy_lane = true,
+ .regulator_data = dsi_phy_7nm_98400uA_regulators,
+ .num_regulators = ARRAY_SIZE(dsi_phy_7nm_98400uA_regulators),
+ .ops = {
+ .enable = dsi_7nm_phy_enable,
+ .disable = dsi_7nm_phy_disable,
+ .pll_init = dsi_pll_7nm_init,
+ .save_pll_state = dsi_7nm_pll_save_state,
+ .restore_pll_state = dsi_7nm_pll_restore_state,
+ .set_continuous_clock = dsi_7nm_set_continuous_clock,
+ },
+ .min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+ .max_pll_rate = 5000000000UL,
+#else
+ .max_pll_rate = ULONG_MAX,
+#endif
+ .io_start = { 0xae95000, 0xae97000 },
+ .num_dsi_phy = 2,
+ .quirks = DSI_PHY_7NM_QUIRK_V5_2,
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 7/7] drm/msm/dsi: add support for DSI 2.7.0
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 10:15 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: Neil Armstrong, devicetree, linux-arm-msm, linux-kernel,
dri-devel, Krzysztof Kozlowski, freedreno
Add support for DSI 2.7.0 (block used on sm8550).
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 16 ++++++++++++++++
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 59a4cc95a251..33884ebd2f86 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -181,6 +181,20 @@ static const struct msm_dsi_config sdm845_dsi_cfg = {
.num_dsi = 2,
};
+static const struct regulator_bulk_data sm8550_dsi_regulators[] = {
+ { .supply = "vdda", .init_load_uA = 16800 }, /* 1.2 V */
+};
+
+static const struct msm_dsi_config sm8550_dsi_cfg = {
+ .io_offset = DSI_6G_REG_SHIFT,
+ .regulator_data = sm8550_dsi_regulators,
+ .num_regulators = ARRAY_SIZE(sm8550_dsi_regulators),
+ .bus_clk_names = dsi_sdm845_bus_clk_names,
+ .num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
+ .io_start = { 0xae94000, 0xae96000 },
+ .num_dsi = 2,
+};
+
static const struct regulator_bulk_data sc7180_dsi_regulators[] = {
{ .supply = "vdda", .init_load_uA = 21800 }, /* 1.2 V */
};
@@ -302,6 +316,8 @@ static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
&sc7280_dsi_cfg, &msm_dsi_6g_v2_host_ops},
{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_6_0,
&sdm845_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+ {MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_7_0,
+ &sm8550_dsi_cfg, &msm_dsi_6g_v2_host_ops},
};
const struct msm_dsi_cfg_handler *msm_dsi_cfg_get(u32 major, u32 minor)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 95957fab499d..44be4a88aa83 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -26,6 +26,7 @@
#define MSM_DSI_6G_VER_MINOR_V2_4_1 0x20040001
#define MSM_DSI_6G_VER_MINOR_V2_5_0 0x20050000
#define MSM_DSI_6G_VER_MINOR_V2_6_0 0x20060000
+#define MSM_DSI_6G_VER_MINOR_V2_7_0 0x20070000
#define MSM_DSI_V2_VER_MINOR_8064 0x0
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 7/7] drm/msm/dsi: add support for DSI 2.7.0
@ 2023-01-09 10:15 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:15 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
Jonathan Marek
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Neil Armstrong, Krzysztof Kozlowski
Add support for DSI 2.7.0 (block used on sm8550).
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 16 ++++++++++++++++
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 59a4cc95a251..33884ebd2f86 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -181,6 +181,20 @@ static const struct msm_dsi_config sdm845_dsi_cfg = {
.num_dsi = 2,
};
+static const struct regulator_bulk_data sm8550_dsi_regulators[] = {
+ { .supply = "vdda", .init_load_uA = 16800 }, /* 1.2 V */
+};
+
+static const struct msm_dsi_config sm8550_dsi_cfg = {
+ .io_offset = DSI_6G_REG_SHIFT,
+ .regulator_data = sm8550_dsi_regulators,
+ .num_regulators = ARRAY_SIZE(sm8550_dsi_regulators),
+ .bus_clk_names = dsi_sdm845_bus_clk_names,
+ .num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
+ .io_start = { 0xae94000, 0xae96000 },
+ .num_dsi = 2,
+};
+
static const struct regulator_bulk_data sc7180_dsi_regulators[] = {
{ .supply = "vdda", .init_load_uA = 21800 }, /* 1.2 V */
};
@@ -302,6 +316,8 @@ static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
&sc7280_dsi_cfg, &msm_dsi_6g_v2_host_ops},
{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_6_0,
&sdm845_dsi_cfg, &msm_dsi_6g_v2_host_ops},
+ {MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_7_0,
+ &sm8550_dsi_cfg, &msm_dsi_6g_v2_host_ops},
};
const struct msm_dsi_cfg_handler *msm_dsi_cfg_get(u32 major, u32 minor)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 95957fab499d..44be4a88aa83 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -26,6 +26,7 @@
#define MSM_DSI_6G_VER_MINOR_V2_4_1 0x20040001
#define MSM_DSI_6G_VER_MINOR_V2_5_0 0x20050000
#define MSM_DSI_6G_VER_MINOR_V2_6_0 0x20060000
+#define MSM_DSI_6G_VER_MINOR_V2_7_0 0x20070000
#define MSM_DSI_V2_VER_MINOR_8064 0x0
--
2.34.1
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH v3 2/7] dt-bindings: display/msm: document DPU on SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 14:30 ` Rob Herring
-1 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-01-09 14:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: devicetree, Sean Paul, Rob Clark, Krzysztof Kozlowski,
Dmitry Baryshkov, Abhinav Kumar, freedreno, linux-kernel,
Rob Herring, Jonathan Marek, Krzysztof Kozlowski, linux-arm-msm,
Daniel Vetter, David Airlie, dri-devel
On Mon, 09 Jan 2023 11:15:18 +0100, Neil Armstrong wrote:
> Document the DPU hardware found on the Qualcomm SM8550 platform.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm8550-dpu.yaml | 134 +++++++++++++++++++++
> 1 file changed, 134 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1508: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230103-topic-sm8550-upstream-mdss-dsi-v3-2-660c3bcb127f@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-01-09 14:30 ` Rob Herring
-1 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-01-09 14:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: freedreno, Daniel Vetter, Jonathan Marek, Rob Clark, dri-devel,
Krzysztof Kozlowski, Sean Paul, devicetree, linux-kernel,
linux-arm-msm, Rob Herring, Dmitry Baryshkov, David Airlie,
Krzysztof Kozlowski, Abhinav Kumar
On Mon, 09 Jan 2023 11:15:19 +0100, Neil Armstrong wrote:
> Document the MDSS hardware found on the Qualcomm SM8550 platform.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
> 1 file changed, 331 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1508: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230103-topic-sm8550-upstream-mdss-dsi-v3-3-660c3bcb127f@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 2/7] dt-bindings: display/msm: document DPU on SM8550
@ 2023-01-09 14:30 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-01-09 14:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: devicetree, Jonathan Marek, freedreno, Krzysztof Kozlowski,
dri-devel, Abhinav Kumar, Rob Herring, Krzysztof Kozlowski,
linux-arm-msm, Dmitry Baryshkov, Sean Paul, linux-kernel
On Mon, 09 Jan 2023 11:15:18 +0100, Neil Armstrong wrote:
> Document the DPU hardware found on the Qualcomm SM8550 platform.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm8550-dpu.yaml | 134 +++++++++++++++++++++
> 1 file changed, 134 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1508: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230103-topic-sm8550-upstream-mdss-dsi-v3-2-660c3bcb127f@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
@ 2023-01-09 14:30 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-01-09 14:30 UTC (permalink / raw)
To: Neil Armstrong
Cc: devicetree, Jonathan Marek, Sean Paul, linux-kernel, dri-devel,
Abhinav Kumar, Krzysztof Kozlowski, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, Dmitry Baryshkov, freedreno
On Mon, 09 Jan 2023 11:15:19 +0100, Neil Armstrong wrote:
> Document the MDSS hardware found on the Qualcomm SM8550 platform.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
> 1 file changed, 331 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1508: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230103-topic-sm8550-upstream-mdss-dsi-v3-3-660c3bcb127f@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 22:41 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Krzysztof Kozlowski
On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>
> This patchset is based on the SM8450 display support serie at [1].
>
> In order to work, the following patchsets are required:
> - PM8550 LDO fix at [2]
> - DISPCC driver at [3]
>
> [...]
Applied, thanks!
[1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
https://gitlab.freedesktop.org/lumag/msm/-/commit/71917f654bae
[2/7] dt-bindings: display/msm: document DPU on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/602082368233
[3/7] dt-bindings: display/msm: document MDSS on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/9cb8eacfb528
[4/7] drm/msm/dpu: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/c3cc4e88efb0
[5/7] drm/msm: mdss: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/f96cca5ed719
[6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/0fd17f93661d
[7/7] drm/msm/dsi: add support for DSI 2.7.0
https://gitlab.freedesktop.org/lumag/msm/-/commit/d797ca161b87
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 22:41 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: devicetree, linux-arm-msm, linux-kernel, dri-devel,
Krzysztof Kozlowski, freedreno
On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>
> This patchset is based on the SM8450 display support serie at [1].
>
> In order to work, the following patchsets are required:
> - PM8550 LDO fix at [2]
> - DISPCC driver at [3]
>
> [...]
Applied, thanks!
[1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
https://gitlab.freedesktop.org/lumag/msm/-/commit/71917f654bae
[2/7] dt-bindings: display/msm: document DPU on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/602082368233
[3/7] dt-bindings: display/msm: document MDSS on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/9cb8eacfb528
[4/7] drm/msm/dpu: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/c3cc4e88efb0
[5/7] drm/msm: mdss: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/f96cca5ed719
[6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/0fd17f93661d
[7/7] drm/msm/dsi: add support for DSI 2.7.0
https://gitlab.freedesktop.org/lumag/msm/-/commit/d797ca161b87
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 23:43 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Krzysztof Kozlowski
On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>
> This patchset is based on the SM8450 display support serie at [1].
>
> In order to work, the following patchsets are required:
> - PM8550 LDO fix at [2]
> - DISPCC driver at [3]
>
> [...]
Applied, thanks!
[1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
https://gitlab.freedesktop.org/lumag/msm/-/commit/71917f654bae
[2/7] dt-bindings: display/msm: document DPU on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/602082368233
[3/7] dt-bindings: display/msm: document MDSS on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/9cb8eacfb528
[4/7] drm/msm/dpu: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/c3cc4e88efb0
[5/7] drm/msm: mdss: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/f96cca5ed719
[6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/0fd17f93661d
[7/7] drm/msm/dsi: add support for DSI 2.7.0
https://gitlab.freedesktop.org/lumag/msm/-/commit/d797ca161b87
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-01-09 22:41 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-09 23:43 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: devicetree, linux-arm-msm, linux-kernel, dri-devel,
Krzysztof Kozlowski, freedreno
On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>
> This patchset is based on the SM8450 display support serie at [1].
>
> In order to work, the following patchsets are required:
> - PM8550 LDO fix at [2]
> - DISPCC driver at [3]
>
> [...]
Applied, thanks!
[1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
https://gitlab.freedesktop.org/lumag/msm/-/commit/71917f654bae
[2/7] dt-bindings: display/msm: document DPU on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/602082368233
[3/7] dt-bindings: display/msm: document MDSS on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/9cb8eacfb528
[4/7] drm/msm/dpu: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/c3cc4e88efb0
[5/7] drm/msm: mdss: add support for SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/f96cca5ed719
[6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/0fd17f93661d
[7/7] drm/msm/dsi: add support for DSI 2.7.0
https://gitlab.freedesktop.org/lumag/msm/-/commit/d797ca161b87
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
2023-01-09 22:41 ` Dmitry Baryshkov
@ 2023-01-10 4:18 ` Dmitry Baryshkov
-1 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-10 4:18 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Krzysztof Kozlowski
On 10/01/2023 01:43, Dmitry Baryshkov wrote:
>
> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
>> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>>
>> This patchset is based on the SM8450 display support serie at [1].
>>
>> In order to work, the following patchsets are required:
>> - PM8550 LDO fix at [2]
>> - DISPCC driver at [3]
>>
>> [...]
>
> Applied, thanks!
>
> [1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
> https://gitlab.freedesktop.org/lumag/msm/-/commit/71917f654bae
> [2/7] dt-bindings: display/msm: document DPU on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/602082368233
These two patches were removed for now, until we have dispcc and
interconnect bindings in place.
> [3/7] dt-bindings: display/msm: document MDSS on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/9cb8eacfb528
> [4/7] drm/msm/dpu: add support for SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/c3cc4e88efb0
> [5/7] drm/msm: mdss: add support for SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/f96cca5ed719
> [6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/0fd17f93661d
> [7/7] drm/msm/dsi: add support for DSI 2.7.0
> https://gitlab.freedesktop.org/lumag/msm/-/commit/d797ca161b87
>
> Best regards,
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-01-10 4:18 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-10 4:18 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: devicetree, linux-arm-msm, linux-kernel, dri-devel,
Krzysztof Kozlowski, freedreno
On 10/01/2023 01:43, Dmitry Baryshkov wrote:
>
> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
>> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>>
>> This patchset is based on the SM8450 display support serie at [1].
>>
>> In order to work, the following patchsets are required:
>> - PM8550 LDO fix at [2]
>> - DISPCC driver at [3]
>>
>> [...]
>
> Applied, thanks!
>
> [1/7] dt-bindings: display/msm: document the SM8550 DSI PHY
> https://gitlab.freedesktop.org/lumag/msm/-/commit/71917f654bae
> [2/7] dt-bindings: display/msm: document DPU on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/602082368233
These two patches were removed for now, until we have dispcc and
interconnect bindings in place.
> [3/7] dt-bindings: display/msm: document MDSS on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/9cb8eacfb528
> [4/7] drm/msm/dpu: add support for SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/c3cc4e88efb0
> [5/7] drm/msm: mdss: add support for SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/f96cca5ed719
> [6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/0fd17f93661d
> [7/7] drm/msm/dsi: add support for DSI 2.7.0
> https://gitlab.freedesktop.org/lumag/msm/-/commit/d797ca161b87
>
> Best regards,
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
2023-01-09 14:30 ` Rob Herring
@ 2023-01-10 13:54 ` Rob Herring
-1 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-01-10 13:54 UTC (permalink / raw)
To: Neil Armstrong
Cc: devicetree, Jonathan Marek, Sean Paul, linux-kernel, dri-devel,
Abhinav Kumar, Krzysztof Kozlowski, Krzysztof Kozlowski,
linux-arm-msm, Dmitry Baryshkov, freedreno
On Mon, Jan 9, 2023 at 8:30 AM Rob Herring <robh@kernel.org> wrote:
>
>
> On Mon, 09 Jan 2023 11:15:19 +0100, Neil Armstrong wrote:
> > Document the MDSS hardware found on the Qualcomm SM8550 platform.
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> > ---
> > .../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
> > 1 file changed, 331 insertions(+)
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
> 21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1508: dt_binding_check] Error 2
Now failing in linux-next... Why was this applied before the dependency?
Rob
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
@ 2023-01-10 13:54 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-01-10 13:54 UTC (permalink / raw)
To: Neil Armstrong
Cc: freedreno, Daniel Vetter, Jonathan Marek, Rob Clark, dri-devel,
Krzysztof Kozlowski, Sean Paul, devicetree, linux-kernel,
linux-arm-msm, Dmitry Baryshkov, David Airlie,
Krzysztof Kozlowski, Abhinav Kumar
On Mon, Jan 9, 2023 at 8:30 AM Rob Herring <robh@kernel.org> wrote:
>
>
> On Mon, 09 Jan 2023 11:15:19 +0100, Neil Armstrong wrote:
> > Document the MDSS hardware found on the Qualcomm SM8550 platform.
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> > ---
> > .../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
> > 1 file changed, 331 insertions(+)
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
> 21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1508: dt_binding_check] Error 2
Now failing in linux-next... Why was this applied before the dependency?
Rob
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
2023-01-10 13:54 ` Rob Herring
@ 2023-01-10 15:27 ` Dmitry Baryshkov
-1 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-10 15:27 UTC (permalink / raw)
To: Rob Herring, Neil Armstrong
Cc: devicetree, Jonathan Marek, Sean Paul, linux-kernel, dri-devel,
Abhinav Kumar, Krzysztof Kozlowski, Krzysztof Kozlowski,
linux-arm-msm, freedreno
On 10/01/2023 15:54, Rob Herring wrote:
> On Mon, Jan 9, 2023 at 8:30 AM Rob Herring <robh@kernel.org> wrote:
>>
>>
>> On Mon, 09 Jan 2023 11:15:19 +0100, Neil Armstrong wrote:
>>> Document the MDSS hardware found on the Qualcomm SM8550 platform.
>>>
>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> ---
>>> .../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
>>> 1 file changed, 331 insertions(+)
>>>
>>
>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>
>> yamllint warnings/errors:
>>
>> dtschema/dtc warnings/errors:
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
>> 21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> compilation terminated.
>> make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dtb] Error 1
>> make[1]: *** Waiting for unfinished jobs....
>> make: *** [Makefile:1508: dt_binding_check] Error 2
>
> Now failing in linux-next... Why was this applied before the dependency?
I failed to notice the dependency while applying. It was taken out, but
probably too late to propagate into today's linux-next. It will be fixed
tomorrow. Please excuse me for the troubles.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: display/msm: document MDSS on SM8550
@ 2023-01-10 15:27 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-01-10 15:27 UTC (permalink / raw)
To: Rob Herring, Neil Armstrong
Cc: freedreno, Daniel Vetter, Jonathan Marek, Rob Clark, dri-devel,
Krzysztof Kozlowski, Sean Paul, devicetree, linux-kernel,
linux-arm-msm, David Airlie, Krzysztof Kozlowski, Abhinav Kumar
On 10/01/2023 15:54, Rob Herring wrote:
> On Mon, Jan 9, 2023 at 8:30 AM Rob Herring <robh@kernel.org> wrote:
>>
>>
>> On Mon, 09 Jan 2023 11:15:19 +0100, Neil Armstrong wrote:
>>> Document the MDSS hardware found on the Qualcomm SM8550 platform.
>>>
>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> ---
>>> .../bindings/display/msm/qcom,sm8550-mdss.yaml | 331 +++++++++++++++++++++
>>> 1 file changed, 331 insertions(+)
>>>
>>
>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>
>> yamllint warnings/errors:
>>
>> dtschema/dtc warnings/errors:
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,sm8550-dispcc.h: No such file or directory
>> 21 | #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> compilation terminated.
>> make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dtb] Error 1
>> make[1]: *** Waiting for unfinished jobs....
>> make: *** [Makefile:1508: dt_binding_check] Error 2
>
> Now failing in linux-next... Why was this applied before the dependency?
I failed to notice the dependency while applying. It was taken out, but
probably too late to propagate into today's linux-next. It will be fixed
tomorrow. Please excuse me for the troubles.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
2023-01-09 10:15 ` Neil Armstrong
@ 2023-03-28 22:37 ` Dmitry Baryshkov
-1 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-03-28 22:37 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Krzysztof Kozlowski
On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>
> This patchset is based on the SM8450 display support serie at [1].
>
> In order to work, the following patchsets are required:
> - PM8550 LDO fix at [2]
> - DISPCC driver at [3]
>
> [...]
Applied, thanks!
[2/7] dt-bindings: display/msm: document DPU on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
[3/7] dt-bindings: display/msm: document MDSS on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-03-28 22:37 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-03-28 22:37 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Rob Herring, Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong
Cc: devicetree, linux-arm-msm, linux-kernel, dri-devel,
Krzysztof Kozlowski, freedreno
On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>
> This patchset is based on the SM8450 display support serie at [1].
>
> In order to work, the following patchsets are required:
> - PM8550 LDO fix at [2]
> - DISPCC driver at [3]
>
> [...]
Applied, thanks!
[2/7] dt-bindings: display/msm: document DPU on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
[3/7] dt-bindings: display/msm: document MDSS on SM8550
https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
2023-03-28 22:37 ` Dmitry Baryshkov
@ 2023-03-29 19:52 ` Rob Herring
-1 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-03-29 19:52 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Krzysztof Kozlowski
On Tue, Mar 28, 2023 at 5:38 PM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
>
> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> > This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
> >
> > This patchset is based on the SM8450 display support serie at [1].
> >
> > In order to work, the following patchsets are required:
> > - PM8550 LDO fix at [2]
> > - DISPCC driver at [3]
> >
> > [...]
>
> Applied, thanks!
>
> [2/7] dt-bindings: display/msm: document DPU on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
> [3/7] dt-bindings: display/msm: document MDSS on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
And now failing on linux-next just as my bot reported:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:24:18:
fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
directory
24 | #include <dt-bindings/interconnect/qcom,sm8550.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:419:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb]
Error 1
Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:25:18:
fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
directory
25 | #include <dt-bindings/interconnect/qcom,sm8550.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Please fix. And quickly please. Fixes in the DRM tree seem to take
forever to get in...
Rob
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-03-29 19:52 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2023-03-29 19:52 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Neil Armstrong, Jonathan Marek, devicetree, Sean Paul,
Abhinav Kumar, dri-devel, linux-kernel, Krzysztof Kozlowski,
Krzysztof Kozlowski, linux-arm-msm, freedreno
On Tue, Mar 28, 2023 at 5:38 PM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
>
> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
> > This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
> >
> > This patchset is based on the SM8450 display support serie at [1].
> >
> > In order to work, the following patchsets are required:
> > - PM8550 LDO fix at [2]
> > - DISPCC driver at [3]
> >
> > [...]
>
> Applied, thanks!
>
> [2/7] dt-bindings: display/msm: document DPU on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
> [3/7] dt-bindings: display/msm: document MDSS on SM8550
> https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
And now failing on linux-next just as my bot reported:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:24:18:
fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
directory
24 | #include <dt-bindings/interconnect/qcom,sm8550.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:419:
Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb]
Error 1
Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:25:18:
fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
directory
25 | #include <dt-bindings/interconnect/qcom,sm8550.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Please fix. And quickly please. Fixes in the DRM tree seem to take
forever to get in...
Rob
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
2023-03-29 19:52 ` Rob Herring
@ 2023-03-29 20:13 ` Dmitry Baryshkov
-1 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-03-29 20:13 UTC (permalink / raw)
To: Rob Herring
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Krzysztof Kozlowski, Jonathan Marek, Neil Armstrong,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Krzysztof Kozlowski
On 29/03/2023 22:52, Rob Herring wrote:
> On Tue, Mar 28, 2023 at 5:38 PM Dmitry Baryshkov
> <dmitry.baryshkov@linaro.org> wrote:
>>
>>
>> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
>>> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>>>
>>> This patchset is based on the SM8450 display support serie at [1].
>>>
>>> In order to work, the following patchsets are required:
>>> - PM8550 LDO fix at [2]
>>> - DISPCC driver at [3]
>>>
>>> [...]
>>
>> Applied, thanks!
>>
>> [2/7] dt-bindings: display/msm: document DPU on SM8550
>> https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
>> [3/7] dt-bindings: display/msm: document MDSS on SM8550
>> https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
>
> And now failing on linux-next just as my bot reported:
>
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:24:18:
> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
> directory
> 24 | #include <dt-bindings/interconnect/qcom,sm8550.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[1]: *** [scripts/Makefile.lib:419:
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb]
> Error 1
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:25:18:
> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
> directory
> 25 | #include <dt-bindings/interconnect/qcom,sm8550.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
>
> Please fix. And quickly please. Fixes in the DRM tree seem to take
> forever to get in...
I pushed the fix, so it will arrive in linux-next tomorrow or the day
after tomorrow. Please excuse me for breaking it again. I checked that
the patches were merged, but didn't notice that the header name was
changed in the process. Mea culpa.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-03-29 20:13 ` Dmitry Baryshkov
0 siblings, 0 replies; 38+ messages in thread
From: Dmitry Baryshkov @ 2023-03-29 20:13 UTC (permalink / raw)
To: Rob Herring
Cc: Neil Armstrong, Jonathan Marek, devicetree, Sean Paul,
Abhinav Kumar, dri-devel, linux-kernel, Krzysztof Kozlowski,
Krzysztof Kozlowski, linux-arm-msm, freedreno
On 29/03/2023 22:52, Rob Herring wrote:
> On Tue, Mar 28, 2023 at 5:38 PM Dmitry Baryshkov
> <dmitry.baryshkov@linaro.org> wrote:
>>
>>
>> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
>>> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>>>
>>> This patchset is based on the SM8450 display support serie at [1].
>>>
>>> In order to work, the following patchsets are required:
>>> - PM8550 LDO fix at [2]
>>> - DISPCC driver at [3]
>>>
>>> [...]
>>
>> Applied, thanks!
>>
>> [2/7] dt-bindings: display/msm: document DPU on SM8550
>> https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
>> [3/7] dt-bindings: display/msm: document MDSS on SM8550
>> https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
>
> And now failing on linux-next just as my bot reported:
>
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:24:18:
> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
> directory
> 24 | #include <dt-bindings/interconnect/qcom,sm8550.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[1]: *** [scripts/Makefile.lib:419:
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb]
> Error 1
> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:25:18:
> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
> directory
> 25 | #include <dt-bindings/interconnect/qcom,sm8550.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
>
> Please fix. And quickly please. Fixes in the DRM tree seem to take
> forever to get in...
I pushed the fix, so it will arrive in linux-next tomorrow or the day
after tomorrow. Please excuse me for breaking it again. I checked that
the patches were merged, but didn't notice that the header name was
changed in the process. Mea culpa.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
2023-03-29 20:13 ` Dmitry Baryshkov
@ 2023-03-30 7:10 ` Neil Armstrong
-1 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-03-30 7:10 UTC (permalink / raw)
To: Dmitry Baryshkov, Rob Herring
Cc: Rob Clark, Abhinav Kumar, Sean Paul, David Airlie, Daniel Vetter,
Krzysztof Kozlowski, Jonathan Marek, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Krzysztof Kozlowski
On 29/03/2023 22:13, Dmitry Baryshkov wrote:
> On 29/03/2023 22:52, Rob Herring wrote:
>> On Tue, Mar 28, 2023 at 5:38 PM Dmitry Baryshkov
>> <dmitry.baryshkov@linaro.org> wrote:
>>>
>>>
>>> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
>>>> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>>>>
>>>> This patchset is based on the SM8450 display support serie at [1].
>>>>
>>>> In order to work, the following patchsets are required:
>>>> - PM8550 LDO fix at [2]
>>>> - DISPCC driver at [3]
>>>>
>>>> [...]
>>>
>>> Applied, thanks!
>>>
>>> [2/7] dt-bindings: display/msm: document DPU on SM8550
>>> https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
>>> [3/7] dt-bindings: display/msm: document MDSS on SM8550
>>> https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
>>
>> And now failing on linux-next just as my bot reported:
>>
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:24:18:
>> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
>> directory
>> 24 | #include <dt-bindings/interconnect/qcom,sm8550.h>
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> compilation terminated.
>> make[1]: *** [scripts/Makefile.lib:419:
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb]
>> Error 1
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:25:18:
>> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
>> directory
>> 25 | #include <dt-bindings/interconnect/qcom,sm8550.h>
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> compilation terminated.
>>
>> Please fix. And quickly please. Fixes in the DRM tree seem to take
>> forever to get in...
>
> I pushed the fix, so it will arrive in linux-next tomorrow or the day after tomorrow. Please excuse me for breaking it again. I checked that the patches were merged, but didn't notice that the header name was changed in the process. Mea culpa.
My bad I should have rebased and sent a v4 with the bindings only,
Neil
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 0/7] drm/msm: add support for SM8550
@ 2023-03-30 7:10 ` Neil Armstrong
0 siblings, 0 replies; 38+ messages in thread
From: Neil Armstrong @ 2023-03-30 7:10 UTC (permalink / raw)
To: Dmitry Baryshkov, Rob Herring
Cc: freedreno, Jonathan Marek, devicetree, Sean Paul, Abhinav Kumar,
dri-devel, linux-kernel, Krzysztof Kozlowski,
Krzysztof Kozlowski, linux-arm-msm
On 29/03/2023 22:13, Dmitry Baryshkov wrote:
> On 29/03/2023 22:52, Rob Herring wrote:
>> On Tue, Mar 28, 2023 at 5:38 PM Dmitry Baryshkov
>> <dmitry.baryshkov@linaro.org> wrote:
>>>
>>>
>>> On Mon, 09 Jan 2023 11:15:17 +0100, Neil Armstrong wrote:
>>>> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8550 platform.
>>>>
>>>> This patchset is based on the SM8450 display support serie at [1].
>>>>
>>>> In order to work, the following patchsets are required:
>>>> - PM8550 LDO fix at [2]
>>>> - DISPCC driver at [3]
>>>>
>>>> [...]
>>>
>>> Applied, thanks!
>>>
>>> [2/7] dt-bindings: display/msm: document DPU on SM8550
>>> https://gitlab.freedesktop.org/lumag/msm/-/commit/4557e40338d2
>>> [3/7] dt-bindings: display/msm: document MDSS on SM8550
>>> https://gitlab.freedesktop.org/lumag/msm/-/commit/0e4205eb8663
>>
>> And now failing on linux-next just as my bot reported:
>>
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dts:24:18:
>> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
>> directory
>> 24 | #include <dt-bindings/interconnect/qcom,sm8550.h>
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> compilation terminated.
>> make[1]: *** [scripts/Makefile.lib:419:
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.example.dtb]
>> Error 1
>> Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.example.dts:25:18:
>> fatal error: dt-bindings/interconnect/qcom,sm8550.h: No such file or
>> directory
>> 25 | #include <dt-bindings/interconnect/qcom,sm8550.h>
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> compilation terminated.
>>
>> Please fix. And quickly please. Fixes in the DRM tree seem to take
>> forever to get in...
>
> I pushed the fix, so it will arrive in linux-next tomorrow or the day after tomorrow. Please excuse me for breaking it again. I checked that the patches were merged, but didn't notice that the header name was changed in the process. Mea culpa.
My bad I should have rebased and sent a v4 with the bindings only,
Neil
>
^ permalink raw reply [flat|nested] 38+ messages in thread
end of thread, other threads:[~2023-03-30 7:10 UTC | newest]
Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-09 10:15 [PATCH v3 0/7] drm/msm: add support for SM8550 Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 10:15 ` [PATCH v3 1/7] dt-bindings: display/msm: document the SM8550 DSI PHY Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 10:15 ` [PATCH v3 2/7] dt-bindings: display/msm: document DPU on SM8550 Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 14:30 ` Rob Herring
2023-01-09 14:30 ` Rob Herring
2023-01-09 10:15 ` [PATCH v3 3/7] dt-bindings: display/msm: document MDSS " Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 14:30 ` Rob Herring
2023-01-09 14:30 ` Rob Herring
2023-01-10 13:54 ` Rob Herring
2023-01-10 13:54 ` Rob Herring
2023-01-10 15:27 ` Dmitry Baryshkov
2023-01-10 15:27 ` Dmitry Baryshkov
2023-01-09 10:15 ` [PATCH v3 4/7] drm/msm/dpu: add support for SM8550 Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 10:15 ` [PATCH v3 5/7] drm/msm: mdss: " Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 10:15 ` [PATCH v3 6/7] drm/msm/dsi: add support for DSI-PHY on SM8550 Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 10:15 ` [PATCH v3 7/7] drm/msm/dsi: add support for DSI 2.7.0 Neil Armstrong
2023-01-09 10:15 ` Neil Armstrong
2023-01-09 22:41 ` [PATCH v3 0/7] drm/msm: add support for SM8550 Dmitry Baryshkov
2023-01-09 23:43 ` Dmitry Baryshkov
2023-01-09 23:43 ` Dmitry Baryshkov
2023-01-09 22:41 ` Dmitry Baryshkov
2023-01-10 4:18 ` Dmitry Baryshkov
2023-01-10 4:18 ` Dmitry Baryshkov
2023-03-28 22:37 ` Dmitry Baryshkov
2023-03-28 22:37 ` Dmitry Baryshkov
2023-03-29 19:52 ` Rob Herring
2023-03-29 19:52 ` Rob Herring
2023-03-29 20:13 ` Dmitry Baryshkov
2023-03-29 20:13 ` Dmitry Baryshkov
2023-03-30 7:10 ` Neil Armstrong
2023-03-30 7:10 ` Neil Armstrong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.