[PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Konrad Dybcio]

v2.5.0 support was originally added for SC7280, but this hw is also
present on SM8350, which has one more DSI host. Bump up the dsi count
and fill in the register of the secondary host to allow it to probe.

This should not have any adverse effects on SC7280, as the secondary
CTRL will only be touched if it's defined, anyway.

Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 33884ebd2f86..6d21f0b33411 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -223,8 +223,8 @@ static const struct msm_dsi_config sc7280_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(sc7280_dsi_regulators),
 	.bus_clk_names = dsi_sc7280_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names),
-	.io_start = { 0xae94000 },
-	.num_dsi = 1,
+	.io_start = { 0xae94000, 0xae96000 },
+	.num_dsi = 2,
 };
 
 static const char * const dsi_qcm2290_bus_clk_names[] = {
-- 
2.39.1

[PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Konrad Dybcio]

v2.5.0 support was originally added for SC7280, but this hw is also
present on SM8350, which has one more DSI host. Bump up the dsi count
and fill in the register of the secondary host to allow it to probe.

This should not have any adverse effects on SC7280, as the secondary
CTRL will only be touched if it's defined, anyway.

Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 33884ebd2f86..6d21f0b33411 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -223,8 +223,8 @@ static const struct msm_dsi_config sc7280_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(sc7280_dsi_regulators),
 	.bus_clk_names = dsi_sc7280_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names),
-	.io_start = { 0xae94000 },
-	.num_dsi = 1,
+	.io_start = { 0xae94000, 0xae96000 },
+	.num_dsi = 2,
 };
 
 static const char * const dsi_qcm2290_bus_clk_names[] = {
-- 
2.39.1

[PATCH 2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn

[Konrad Dybcio]

Panels/DRM bridges definitely don't need 64bits of address space and
are usually not 32-bit wide. Set address-cells to 1 and size-cells to
0.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index dc84dbed81bb..c0ba67747c24 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2989,6 +2989,9 @@ mdss_dsi0: dsi@ae94000 {
 
 				phys = <&mdss_dsi0_phy>;
 
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				status = "disabled";
 
 				dsi0_opp_table: opp-table {
@@ -3084,6 +3087,9 @@ mdss_dsi1: dsi@ae96000 {
 
 				phys = <&mdss_dsi1_phy>;
 
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				status = "disabled";
 
 				dsi1_opp_table: opp-table {
-- 
2.39.1

[PATCH 2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn

[Konrad Dybcio]

Panels/DRM bridges definitely don't need 64bits of address space and
are usually not 32-bit wide. Set address-cells to 1 and size-cells to
0.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index dc84dbed81bb..c0ba67747c24 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2989,6 +2989,9 @@ mdss_dsi0: dsi@ae94000 {
 
 				phys = <&mdss_dsi0_phy>;
 
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				status = "disabled";
 
 				dsi0_opp_table: opp-table {
@@ -3084,6 +3087,9 @@ mdss_dsi1: dsi@ae96000 {
 
 				phys = <&mdss_dsi1_phy>;
 
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				status = "disabled";
 
 				dsi1_opp_table: opp-table {
-- 
2.39.1

[PATCH 3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt

[Konrad Dybcio]

The interrupt was wrong, likely copypasted from DSI0. Fix it.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c0ba67747c24..ed0106829cb9 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3062,7 +3062,7 @@ mdss_dsi1: dsi@ae96000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
-- 
2.39.1

[PATCH 3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt

[Konrad Dybcio]

The interrupt was wrong, likely copypasted from DSI0. Fix it.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c0ba67747c24..ed0106829cb9 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3062,7 +3062,7 @@ mdss_dsi1: dsi@ae96000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
-- 
2.39.1

[PATCH 4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC

[Konrad Dybcio]

This was omitted but is necessary for DSI1 to function. Fix it.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0106829cb9..c964d939289b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3159,7 +3159,7 @@ dispcc: clock-controller@af00000 {
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
-				 <0>, <0>,
+				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
 				 <0>,
 				 <0>;
 			clock-names = "bi_tcxo",
-- 
2.39.1

[PATCH 4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC

[Konrad Dybcio]

This was omitted but is necessary for DSI1 to function. Fix it.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0106829cb9..c964d939289b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3159,7 +3159,7 @@ dispcc: clock-controller@af00000 {
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
-				 <0>, <0>,
+				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
 				 <0>,
 				 <0>;
 			clock-names = "bi_tcxo",
-- 
2.39.1

[PATCH 5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles

[Konrad Dybcio]

The compatibles were wrong, resulting in the driver not probing. Fix
that.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c964d939289b..22bf6239c757 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3038,7 +3038,7 @@ dsi0_out: endpoint {
 			};
 
 			mdss_dsi0_phy: phy@ae94400 {
-				compatible = "qcom,dsi-phy-5nm-8350";
+				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
 				      <0 0x0ae94900 0 0x260>;
@@ -3135,7 +3135,7 @@ dsi1_out: endpoint {
 			};
 
 			mdss_dsi1_phy: phy@ae96400 {
-				compatible = "qcom,dsi-phy-5nm-8350";
+				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
 				      <0 0x0ae96900 0 0x260>;
-- 
2.39.1

[PATCH 5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles

[Konrad Dybcio]

The compatibles were wrong, resulting in the driver not probing. Fix
that.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c964d939289b..22bf6239c757 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3038,7 +3038,7 @@ dsi0_out: endpoint {
 			};
 
 			mdss_dsi0_phy: phy@ae94400 {
-				compatible = "qcom,dsi-phy-5nm-8350";
+				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
 				      <0 0x0ae94900 0 0x260>;
@@ -3135,7 +3135,7 @@ dsi1_out: endpoint {
 			};
 
 			mdss_dsi1_phy: phy@ae96400 {
-				compatible = "qcom,dsi-phy-5nm-8350";
+				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
 				      <0 0x0ae96900 0 0x260>;
-- 
2.39.1

[PATCH 6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size

[Konrad Dybcio]

As downstream indicates, DSI PLL is actually 0x27c and not 0x260-
wide. Fix that to reserve the correct registers.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 22bf6239c757..b09eb8880376 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3041,7 +3041,7 @@ mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
-				      <0 0x0ae94900 0 0x260>;
+				      <0 0x0ae94900 0 0x27c>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -3138,7 +3138,7 @@ mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
-				      <0 0x0ae96900 0 0x260>;
+				      <0 0x0ae96900 0 0x27c>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
-- 
2.39.1

[PATCH 6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size

[Konrad Dybcio]

As downstream indicates, DSI PLL is actually 0x27c and not 0x260-
wide. Fix that to reserve the correct registers.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 22bf6239c757..b09eb8880376 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3041,7 +3041,7 @@ mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
-				      <0 0x0ae94900 0 0x260>;
+				      <0 0x0ae94900 0 0x27c>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -3138,7 +3138,7 @@ mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
-				      <0 0x0ae96900 0 0x260>;
+				      <0 0x0ae96900 0 0x27c>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
-- 
2.39.1

[PATCH 7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels

[Konrad Dybcio]

Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
be organized near each other while retaining the alphabetical order
in device DTs when referencing by label.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts |  2 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi    | 10 +++++-----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 5a4c4ea4d122..df841230d1b7 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -309,7 +309,7 @@ port@0 {
 				reg = <0>;
 
 				lt9611_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b09eb8880376..0f9427f3319f 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2952,7 +2952,7 @@ ports {
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 				};
@@ -3024,14 +3024,14 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
@@ -3122,13 +3122,13 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
-- 
2.39.1

[PATCH 7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels

[Konrad Dybcio]

Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
be organized near each other while retaining the alphabetical order
in device DTs when referencing by label.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts |  2 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi    | 10 +++++-----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 5a4c4ea4d122..df841230d1b7 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -309,7 +309,7 @@ port@0 {
 				reg = <0>;
 
 				lt9611_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b09eb8880376..0f9427f3319f 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2952,7 +2952,7 @@ ports {
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 				};
@@ -3024,14 +3024,14 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
@@ -3122,13 +3122,13 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
-- 
2.39.1

[PATCH 8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP

[Konrad Dybcio]

Somehow DSI1 was not hooked up to MDP resulting in it not working.
Fix it.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0f9427f3319f..2531a9a80194 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2955,6 +2955,13 @@ dpu_intf1_out: endpoint {
 							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
 				};
 			};
 
@@ -3123,6 +3130,7 @@ ports {
 					port@0 {
 						reg = <0>;
 						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
 						};
 					};
 
-- 
2.39.1

[PATCH 8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP

[Konrad Dybcio]

Somehow DSI1 was not hooked up to MDP resulting in it not working.
Fix it.

Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0f9427f3319f..2531a9a80194 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2955,6 +2955,13 @@ dpu_intf1_out: endpoint {
 							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
 				};
 			};
 
@@ -3123,6 +3130,7 @@ ports {
 					port@0 {
 						reg = <0>;
 						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
 						};
 					};
 
-- 
2.39.1

Re: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> v2.5.0 support was originally added for SC7280, but this hw is also
> present on SM8350, which has one more DSI host. Bump up the dsi count
> and fill in the register of the secondary host to allow it to probe.
> 
> This should not have any adverse effects on SC7280, as the secondary
> CTRL will only be touched if it's defined, anyway.
> 
> Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-- 
With best wishes
Dmitry

Re: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> v2.5.0 support was originally added for SC7280, but this hw is also
> present on SM8350, which has one more DSI host. Bump up the dsi count
> and fill in the register of the secondary host to allow it to probe.
> 
> This should not have any adverse effects on SC7280, as the secondary
> CTRL will only be touched if it's defined, anyway.
> 
> Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-- 
With best wishes
Dmitry

Re: [PATCH 2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> Panels/DRM bridges definitely don't need 64bits of address space and
> are usually not 32-bit wide. Set address-cells to 1 and size-cells to
> 0.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
-- 
With best wishes
Dmitry

Re: [PATCH 2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> Panels/DRM bridges definitely don't need 64bits of address space and
> are usually not 32-bit wide. Set address-cells to 1 and size-cells to
> 0.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
-- 
With best wishes
Dmitry

Re: [PATCH 3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> The interrupt was wrong, likely copypasted from DSI0. Fix it.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-- 
With best wishes
Dmitry

Re: [PATCH 3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> The interrupt was wrong, likely copypasted from DSI0. Fix it.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-- 
With best wishes
Dmitry

Re: [PATCH 4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> This was omitted but is necessary for DSI1 to function. Fix it.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-- 
With best wishes
Dmitry

Re: [PATCH 4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> This was omitted but is necessary for DSI1 to function. Fix it.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-- 
With best wishes
Dmitry

Re: [PATCH 5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> The compatibles were wrong, resulting in the driver not probing. Fix
> that.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> The compatibles were wrong, resulting in the driver not probing. Fix
> that.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> As downstream indicates, DSI PLL is actually 0x27c and not 0x260-
> wide. Fix that to reserve the correct registers.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> As downstream indicates, DSI PLL is actually 0x27c and not 0x260-
> wide. Fix that to reserve the correct registers.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
> be organized near each other while retaining the alphabetical order
> in device DTs when referencing by label.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350-hdk.dts |  2 +-
>   arch/arm64/boot/dts/qcom/sm8350.dtsi    | 10 +++++-----
>   2 files changed, 6 insertions(+), 6 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels

[Dmitry Baryshkov]

On 20/01/2023 23:00, Konrad Dybcio wrote:
> Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
> be organized near each other while retaining the alphabetical order
> in device DTs when referencing by label.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350-hdk.dts |  2 +-
>   arch/arm64/boot/dts/qcom/sm8350.dtsi    | 10 +++++-----
>   2 files changed, 6 insertions(+), 6 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP

[Dmitry Baryshkov]

On 20/01/2023 23:01, Konrad Dybcio wrote:
> Somehow DSI1 was not hooked up to MDP resulting in it not working.
> Fix it.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP

[Dmitry Baryshkov]

On 20/01/2023 23:01, Konrad Dybcio wrote:
> Somehow DSI1 was not hooked up to MDP resulting in it not working.
> Fix it.
> 
> Fixes: d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Dmitry Baryshkov]

On Fri, 20 Jan 2023 22:00:53 +0100, Konrad Dybcio wrote:
> v2.5.0 support was originally added for SC7280, but this hw is also
> present on SM8350, which has one more DSI host. Bump up the dsi count
> and fill in the register of the secondary host to allow it to probe.
> 
> This should not have any adverse effects on SC7280, as the secondary
> CTRL will only be touched if it's defined, anyway.
> 
> [...]

Applied, thanks!

[1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0
      https://gitlab.freedesktop.org/lumag/msm/-/commit/1fe5158e7894

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Re: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Dmitry Baryshkov]

On Fri, 20 Jan 2023 22:00:53 +0100, Konrad Dybcio wrote:
> v2.5.0 support was originally added for SC7280, but this hw is also
> present on SM8350, which has one more DSI host. Bump up the dsi count
> and fill in the register of the secondary host to allow it to probe.
> 
> This should not have any adverse effects on SC7280, as the secondary
> CTRL will only be touched if it's defined, anyway.
> 
> [...]

Applied, thanks!

[1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0
      https://gitlab.freedesktop.org/lumag/msm/-/commit/1fe5158e7894

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Re: (subset) [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Bjorn Andersson]

On Fri, 20 Jan 2023 22:00:53 +0100, Konrad Dybcio wrote:
> v2.5.0 support was originally added for SC7280, but this hw is also
> present on SM8350, which has one more DSI host. Bump up the dsi count
> and fill in the register of the secondary host to allow it to probe.
> 
> This should not have any adverse effects on SC7280, as the secondary
> CTRL will only be touched if it's defined, anyway.
> 
> [...]

Applied, thanks!

[2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn
      commit: 6636818ecf0f1d448360835017473cf94a0ee967
[3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt
      commit: 1eed7995d9da0489e5a46c13bd888ffa987ead98
[4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC
      commit: 0af6a4012b3815ebca7b8080a286edc01e4a89e1
[5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles
      commit: 45cd807de14388010a279765486c13f8ac540dfa
[6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size
      commit: e3e654ced376060d64ede8e2dfde0b1bac0f9086
[7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels
      commit: 2a07efb8c08619888428cc8fd47643c438111f29
[8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP
      commit: b904227a4b693fbb9d5eabc9d7100dc01d9eb973

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: (subset) [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[Bjorn Andersson]

On Fri, 20 Jan 2023 22:00:53 +0100, Konrad Dybcio wrote:
> v2.5.0 support was originally added for SC7280, but this hw is also
> present on SM8350, which has one more DSI host. Bump up the dsi count
> and fill in the register of the secondary host to allow it to probe.
> 
> This should not have any adverse effects on SC7280, as the secondary
> CTRL will only be touched if it's defined, anyway.
> 
> [...]

Applied, thanks!

[2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn
      commit: 6636818ecf0f1d448360835017473cf94a0ee967
[3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt
      commit: 1eed7995d9da0489e5a46c13bd888ffa987ead98
[4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC
      commit: 0af6a4012b3815ebca7b8080a286edc01e4a89e1
[5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles
      commit: 45cd807de14388010a279765486c13f8ac540dfa
[6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size
      commit: e3e654ced376060d64ede8e2dfde0b1bac0f9086
[7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels
      commit: 2a07efb8c08619888428cc8fd47643c438111f29
[8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP
      commit: b904227a4b693fbb9d5eabc9d7100dc01d9eb973

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>