[PATCH 1/9] ARM: dts: exynos: correct HDMI phy compatible in Exynos4

[PATCH 1/9] ARM: dts: exynos: correct HDMI phy compatible in Exynos4

[Krzysztof Kozlowski]

The HDMI phy compatible was missing vendor prefix.

Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 55afe9972460..d1adaee2af58 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@ i2c_8: i2c@138e0000 {
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
-- 
2.34.1

[PATCH 1/9] ARM: dts: exynos: correct HDMI phy compatible in Exynos4

[Krzysztof Kozlowski]

The HDMI phy compatible was missing vendor prefix.

Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 55afe9972460..d1adaee2af58 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@ i2c_8: i2c@138e0000 {
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
    Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property

and dtbs_check:

  exynos5420-arndale-octa.dtb: soc: bus-wcore:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos5420.dtsi | 223 +++++++++++++++---------------
 1 file changed, 111 insertions(+), 112 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 7efe72879dc4..cea92f175d46 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -37,6 +37,117 @@ aliases {
 		spi2 = &spi_2;
 	};
 
+	bus_disp1: bus-disp1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_disp1_fimd: bus-disp1-fimd {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys2: bus-fsys2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys_apb: bus-fsys-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d: bus-g2d {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d_acp: bus-g2d-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+	bus_gen: bus-gen {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_gscl_scaler: bus-gscl-scaler {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg: bus-jpeg {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg_apb: bus-jpeg-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK166>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mscl: bus-mscl {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_noc: bus-noc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK66>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_wcore: bus-wcore {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
 	/*
 	 * The 'cpus' node is not present here but instead it is provided
 	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
@@ -1066,118 +1177,6 @@ sysmmu_fimd1_1: sysmmu@14680000 {
 			power-domains = <&disp_pd>;
 			#iommu-cells = <0>;
 		};
-
-		bus_wcore: bus-wcore {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_noc: bus-noc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys_apb: bus-fsys-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys2: bus-fsys2 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gen: bus-gen {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK66>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d: bus-g2d {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d_acp: bus-g2d-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg: bus-jpeg {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg_apb: bus-jpeg-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK166>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1_fimd: bus-disp1-fimd {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1: bus-disp1 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gscl_scaler: bus-gscl-scaler {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mscl: bus-mscl {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
 	};
 
 	thermal-zones {
-- 
2.34.1

[PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
    Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property

and dtbs_check:

  exynos5420-arndale-octa.dtb: soc: bus-wcore:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos5420.dtsi | 223 +++++++++++++++---------------
 1 file changed, 111 insertions(+), 112 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 7efe72879dc4..cea92f175d46 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -37,6 +37,117 @@ aliases {
 		spi2 = &spi_2;
 	};
 
+	bus_disp1: bus-disp1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_disp1_fimd: bus-disp1-fimd {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys2: bus-fsys2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys_apb: bus-fsys-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d: bus-g2d {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d_acp: bus-g2d-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+	bus_gen: bus-gen {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_gscl_scaler: bus-gscl-scaler {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg: bus-jpeg {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg_apb: bus-jpeg-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK166>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mscl: bus-mscl {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_noc: bus-noc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK66>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_wcore: bus-wcore {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
 	/*
 	 * The 'cpus' node is not present here but instead it is provided
 	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
@@ -1066,118 +1177,6 @@ sysmmu_fimd1_1: sysmmu@14680000 {
 			power-domains = <&disp_pd>;
 			#iommu-cells = <0>;
 		};
-
-		bus_wcore: bus-wcore {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_noc: bus-noc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys_apb: bus-fsys-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys2: bus-fsys2 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gen: bus-gen {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK66>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d: bus-g2d {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d_acp: bus-g2d-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg: bus-jpeg {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg_apb: bus-jpeg-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK166>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1_fimd: bus-disp1-fimd {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1: bus-disp1 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gscl_scaler: bus-gscl-scaler {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mscl: bus-mscl {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
 	};
 
 	thermal-zones {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Marek Szyprowski]

Hi Krzysztof,

On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
>
>    arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>      Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>
> and dtbs_check:
>
>    exynos5420-arndale-octa.dtb: soc: bus-wcore:
>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Frankly speaking I'm not very keen on moving those bus nodes out of 
/soc. Technically speaking this is definitely a part of soc and doesn't 
make much sense outside of it. IMHO they describe SoC hardware details 
and they might be moved somehow under clock controller device(s), 
although this would require some changes in the bindings and drivers.

> ---
>   arch/arm/boot/dts/exynos5420.dtsi | 223 +++++++++++++++---------------
>   1 file changed, 111 insertions(+), 112 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 7efe72879dc4..cea92f175d46 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -37,6 +37,117 @@ aliases {
>   		spi2 = &spi_2;
>   	};
>   
> +	bus_disp1: bus-disp1 {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_disp1_fimd: bus-disp1-fimd {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_fsys: bus-fsys {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_fsys2: bus-fsys2 {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_fsys_apb: bus-fsys-apb {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_g2d: bus-g2d {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_g2d_acp: bus-g2d-acp {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +	bus_gen: bus-gen {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK266>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_gscl_scaler: bus-gscl-scaler {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_jpeg: bus-jpeg {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_jpeg_apb: bus-jpeg-apb {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK166>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_mfc: bus-mfc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK333>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_mscl: bus-mscl {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_noc: bus-noc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_peri: bus-peri {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK66>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_wcore: bus-wcore {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
>   	/*
>   	 * The 'cpus' node is not present here but instead it is provided
>   	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
> @@ -1066,118 +1177,6 @@ sysmmu_fimd1_1: sysmmu@14680000 {
>   			power-domains = <&disp_pd>;
>   			#iommu-cells = <0>;
>   		};
> -
> -		bus_wcore: bus-wcore {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_noc: bus-noc {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_fsys_apb: bus-fsys-apb {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_fsys: bus-fsys {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_fsys2: bus-fsys2 {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_mfc: bus-mfc {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK333>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_gen: bus-gen {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK266>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_peri: bus-peri {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK66>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_g2d: bus-g2d {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_g2d_acp: bus-g2d-acp {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_jpeg: bus-jpeg {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_jpeg_apb: bus-jpeg-apb {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK166>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_disp1_fimd: bus-disp1-fimd {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_disp1: bus-disp1 {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_gscl_scaler: bus-gscl-scaler {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_mscl: bus-mscl {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
>   	};
>   
>   	thermal-zones {

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Marek Szyprowski]

Hi Krzysztof,

On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
>
>    arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>      Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>
> and dtbs_check:
>
>    exynos5420-arndale-octa.dtb: soc: bus-wcore:
>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Frankly speaking I'm not very keen on moving those bus nodes out of 
/soc. Technically speaking this is definitely a part of soc and doesn't 
make much sense outside of it. IMHO they describe SoC hardware details 
and they might be moved somehow under clock controller device(s), 
although this would require some changes in the bindings and drivers.

> ---
>   arch/arm/boot/dts/exynos5420.dtsi | 223 +++++++++++++++---------------
>   1 file changed, 111 insertions(+), 112 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 7efe72879dc4..cea92f175d46 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -37,6 +37,117 @@ aliases {
>   		spi2 = &spi_2;
>   	};
>   
> +	bus_disp1: bus-disp1 {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_disp1_fimd: bus-disp1-fimd {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_fsys: bus-fsys {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_fsys2: bus-fsys2 {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_fsys_apb: bus-fsys-apb {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_g2d: bus-g2d {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_g2d_acp: bus-g2d-acp {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +	bus_gen: bus-gen {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK266>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_gscl_scaler: bus-gscl-scaler {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_jpeg: bus-jpeg {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_jpeg_apb: bus-jpeg-apb {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK166>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_mfc: bus-mfc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK333>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_mscl: bus-mscl {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_noc: bus-noc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_peri: bus-peri {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK66>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
> +	bus_wcore: bus-wcore {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
> +		clock-names = "bus";
> +		status = "disabled";
> +	};
> +
>   	/*
>   	 * The 'cpus' node is not present here but instead it is provided
>   	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
> @@ -1066,118 +1177,6 @@ sysmmu_fimd1_1: sysmmu@14680000 {
>   			power-domains = <&disp_pd>;
>   			#iommu-cells = <0>;
>   		};
> -
> -		bus_wcore: bus-wcore {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_noc: bus-noc {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_fsys_apb: bus-fsys-apb {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_fsys: bus-fsys {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_fsys2: bus-fsys2 {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_mfc: bus-mfc {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK333>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_gen: bus-gen {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK266>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_peri: bus-peri {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK66>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_g2d: bus-g2d {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_g2d_acp: bus-g2d-acp {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_jpeg: bus-jpeg {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_jpeg_apb: bus-jpeg-apb {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK166>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_disp1_fimd: bus-disp1-fimd {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_disp1: bus-disp1 {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_gscl_scaler: bus-gscl-scaler {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
> -
> -		bus_mscl: bus-mscl {
> -			compatible = "samsung,exynos-bus";
> -			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
> -			clock-names = "bus";
> -			status = "disabled";
> -		};
>   	};
>   
>   	thermal-zones {

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

On 26/01/2023 10:47, Marek Szyprowski wrote:
> Hi Krzysztof,
> 
> On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
>> The soc node is supposed to have only device nodes with MMIO addresses,
>> as reported by dtc W=1:
>>
>>    arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>>      Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>>
>> and dtbs_check:
>>
>>    exynos5420-arndale-octa.dtb: soc: bus-wcore:
>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>>
>> Move the bus nodes and their OPP tables out of SoC to fix this.
>> Re-order them alphabetically while moving and put some of the OPP tables
>> in device nodes (if they are not shared).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Frankly speaking I'm not very keen on moving those bus nodes out of 
> /soc. Technically speaking this is definitely a part of soc and doesn't 
> make much sense outside of it. IMHO they describe SoC hardware details 
> and they might be moved somehow under clock controller device(s), 
> although this would require some changes in the bindings and drivers.

That's the only way to fix it without change of drivers any ABI
compatibility issue. The same we do for Qualcomm interconnects, e.g.
arch/arm64/boot/dts/qcom/sm8450.dtsi where some interconnects have some
do not have MMIO space.

I want to achieve finally clean dtbs_check run for all Exynos sources.
The in-tree bindings already pass, so now I am fixing the ones coming
from dtschema (simple-bus.yaml in particular).

If you have any other idea how to seamlessly clean it up, I am happy to
hear. But I guess the main problem is that no one is being paid for
doing anything for Samsung Exynos, so for free not many put much effort
into working on it.

Best regards,
Krzysztof

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

On 26/01/2023 10:47, Marek Szyprowski wrote:
> Hi Krzysztof,
> 
> On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
>> The soc node is supposed to have only device nodes with MMIO addresses,
>> as reported by dtc W=1:
>>
>>    arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>>      Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>>
>> and dtbs_check:
>>
>>    exynos5420-arndale-octa.dtb: soc: bus-wcore:
>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>>
>> Move the bus nodes and their OPP tables out of SoC to fix this.
>> Re-order them alphabetically while moving and put some of the OPP tables
>> in device nodes (if they are not shared).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Frankly speaking I'm not very keen on moving those bus nodes out of 
> /soc. Technically speaking this is definitely a part of soc and doesn't 
> make much sense outside of it. IMHO they describe SoC hardware details 
> and they might be moved somehow under clock controller device(s), 
> although this would require some changes in the bindings and drivers.

That's the only way to fix it without change of drivers any ABI
compatibility issue. The same we do for Qualcomm interconnects, e.g.
arch/arm64/boot/dts/qcom/sm8450.dtsi where some interconnects have some
do not have MMIO space.

I want to achieve finally clean dtbs_check run for all Exynos sources.
The in-tree bindings already pass, so now I am fixing the ones coming
from dtschema (simple-bus.yaml in particular).

If you have any other idea how to seamlessly clean it up, I am happy to
hear. But I guess the main problem is that no one is being paid for
doing anything for Samsung Exynos, so for free not many put much effort
into working on it.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

On 26/01/2023 11:59, Krzysztof Kozlowski wrote:
> On 26/01/2023 10:47, Marek Szyprowski wrote:
>> Hi Krzysztof,
>>
>> On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>> as reported by dtc W=1:
>>>
>>>    arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>>>      Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>>>
>>> and dtbs_check:
>>>
>>>    exynos5420-arndale-octa.dtb: soc: bus-wcore:
>>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>>>
>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>> Re-order them alphabetically while moving and put some of the OPP tables
>>> in device nodes (if they are not shared).
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> Frankly speaking I'm not very keen on moving those bus nodes out of 
>> /soc. Technically speaking this is definitely a part of soc and doesn't 
>> make much sense outside of it. IMHO they describe SoC hardware details 
>> and they might be moved somehow under clock controller device(s), 
>> although this would require some changes in the bindings and drivers.
> 
> That's the only way to fix it without change of drivers any ABI
> compatibility issue. The same we do for Qualcomm interconnects, e.g.
> arch/arm64/boot/dts/qcom/sm8450.dtsi where some interconnects have some
> do not have MMIO space.
> 
> I want to achieve finally clean dtbs_check run for all Exynos sources.
> The in-tree bindings already pass, so now I am fixing the ones coming
> from dtschema (simple-bus.yaml in particular).
> 
> If you have any other idea how to seamlessly clean it up, I am happy to
> hear. But I guess the main problem is that no one is being paid for
> doing anything for Samsung Exynos, so for free not many put much effort
> into working on it.

Marek, I value your feedback a lot and I appreciate your help here. Just
to be clear that I am not ignoring it, little disclaimer:

Unless there is a clear NAK from you or someone else, with an idea to
fix or with a commitment to change driver/bindings, I am planning to
grab these changes.

I really want to get the dtbs_check done. With these and my other fixes,
the arm64 exynos DTS pass fully all dtschema and in-kernel dtbs_check.

Best regards,
Krzysztof

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

On 26/01/2023 11:59, Krzysztof Kozlowski wrote:
> On 26/01/2023 10:47, Marek Szyprowski wrote:
>> Hi Krzysztof,
>>
>> On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>> as reported by dtc W=1:
>>>
>>>    arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>>>      Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>>>
>>> and dtbs_check:
>>>
>>>    exynos5420-arndale-octa.dtb: soc: bus-wcore:
>>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>>>
>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>> Re-order them alphabetically while moving and put some of the OPP tables
>>> in device nodes (if they are not shared).
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> Frankly speaking I'm not very keen on moving those bus nodes out of 
>> /soc. Technically speaking this is definitely a part of soc and doesn't 
>> make much sense outside of it. IMHO they describe SoC hardware details 
>> and they might be moved somehow under clock controller device(s), 
>> although this would require some changes in the bindings and drivers.
> 
> That's the only way to fix it without change of drivers any ABI
> compatibility issue. The same we do for Qualcomm interconnects, e.g.
> arch/arm64/boot/dts/qcom/sm8450.dtsi where some interconnects have some
> do not have MMIO space.
> 
> I want to achieve finally clean dtbs_check run for all Exynos sources.
> The in-tree bindings already pass, so now I am fixing the ones coming
> from dtschema (simple-bus.yaml in particular).
> 
> If you have any other idea how to seamlessly clean it up, I am happy to
> hear. But I guess the main problem is that no one is being paid for
> doing anything for Samsung Exynos, so for free not many put much effort
> into working on it.

Marek, I value your feedback a lot and I appreciate your help here. Just
to be clear that I am not ignoring it, little disclaimer:

Unless there is a clear NAK from you or someone else, with an idea to
fix or with a commitment to change driver/bindings, I am planning to
grab these changes.

I really want to get the dtbs_check done. With these and my other fixes,
the arm64 exynos DTS pass fully all dtschema and in-kernel dtbs_check.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Marek Szyprowski]

On 28.01.2023 11:43, Krzysztof Kozlowski wrote:
> On 26/01/2023 11:59, Krzysztof Kozlowski wrote:
>> On 26/01/2023 10:47, Marek Szyprowski wrote:
>>> Hi Krzysztof,
>>>
>>> On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>> as reported by dtc W=1:
>>>>
>>>>     arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>>>>       Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>>>>
>>>> and dtbs_check:
>>>>
>>>>     exynos5420-arndale-octa.dtb: soc: bus-wcore:
>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>>>>
>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>> in device nodes (if they are not shared).
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> Frankly speaking I'm not very keen on moving those bus nodes out of
>>> /soc. Technically speaking this is definitely a part of soc and doesn't
>>> make much sense outside of it. IMHO they describe SoC hardware details
>>> and they might be moved somehow under clock controller device(s),
>>> although this would require some changes in the bindings and drivers.
>> That's the only way to fix it without change of drivers any ABI
>> compatibility issue. The same we do for Qualcomm interconnects, e.g.
>> arch/arm64/boot/dts/qcom/sm8450.dtsi where some interconnects have some
>> do not have MMIO space.
>>
>> I want to achieve finally clean dtbs_check run for all Exynos sources.
>> The in-tree bindings already pass, so now I am fixing the ones coming
>> from dtschema (simple-bus.yaml in particular).
>>
>> If you have any other idea how to seamlessly clean it up, I am happy to
>> hear. But I guess the main problem is that no one is being paid for
>> doing anything for Samsung Exynos, so for free not many put much effort
>> into working on it.
> Marek, I value your feedback a lot and I appreciate your help here. Just
> to be clear that I am not ignoring it, little disclaimer:
>
> Unless there is a clear NAK from you or someone else, with an idea to
> fix or with a commitment to change driver/bindings, I am planning to
> grab these changes.
>
> I really want to get the dtbs_check done. With these and my other fixes,
> the arm64 exynos DTS pass fully all dtschema and in-kernel dtbs_check.

Go ahead. I won't block it.

Best regards

-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Marek Szyprowski]

On 28.01.2023 11:43, Krzysztof Kozlowski wrote:
> On 26/01/2023 11:59, Krzysztof Kozlowski wrote:
>> On 26/01/2023 10:47, Marek Szyprowski wrote:
>>> Hi Krzysztof,
>>>
>>> On 25.01.2023 10:45, Krzysztof Kozlowski wrote:
>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>> as reported by dtc W=1:
>>>>
>>>>     arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>>>>       Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
>>>>
>>>> and dtbs_check:
>>>>
>>>>     exynos5420-arndale-octa.dtb: soc: bus-wcore:
>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
>>>>
>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>> in device nodes (if they are not shared).
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> Frankly speaking I'm not very keen on moving those bus nodes out of
>>> /soc. Technically speaking this is definitely a part of soc and doesn't
>>> make much sense outside of it. IMHO they describe SoC hardware details
>>> and they might be moved somehow under clock controller device(s),
>>> although this would require some changes in the bindings and drivers.
>> That's the only way to fix it without change of drivers any ABI
>> compatibility issue. The same we do for Qualcomm interconnects, e.g.
>> arch/arm64/boot/dts/qcom/sm8450.dtsi where some interconnects have some
>> do not have MMIO space.
>>
>> I want to achieve finally clean dtbs_check run for all Exynos sources.
>> The in-tree bindings already pass, so now I am fixing the ones coming
>> from dtschema (simple-bus.yaml in particular).
>>
>> If you have any other idea how to seamlessly clean it up, I am happy to
>> hear. But I guess the main problem is that no one is being paid for
>> doing anything for Samsung Exynos, so for free not many put much effort
>> into working on it.
> Marek, I value your feedback a lot and I appreciate your help here. Just
> to be clear that I am not ignoring it, little disclaimer:
>
> Unless there is a clear NAK from you or someone else, with an idea to
> fix or with a commitment to change driver/bindings, I am planning to
> grab these changes.
>
> I really want to get the dtbs_check done. With these and my other fixes,
> the arm64 exynos DTS pass fully all dtschema and in-kernel dtbs_check.

Go ahead. I won't block it.

Best regards

-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>     Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos5420-arndale-octa.dtb: soc: bus-wcore:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).

Applied.

Best regards,
Krzysztof

Re: [PATCH 2/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos5420

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   arch/arm/boot/dts/exynos5420.dtsi:1070.24-1075.5:
>     Warning (simple_bus_reg): /soc/bus-wcore: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos5420-arndale-octa.dtb: soc: bus-wcore:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[2, 769]], 'clock-names': ['bus'], 'status': ['disabled']} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).

Applied.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos3250.dtsi:775.20-781.5:
    Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property

and dtbs_check:

  exynos3250-artik5-eval.dtb: soc: bus-dmc:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[67, 16]], 'clock-names': ['bus'], 'operating-points-v2': [[68]], 'status': ['disabled']} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos3250.dtsi | 352 +++++++++++++++---------------
 1 file changed, 176 insertions(+), 176 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 36b47c2c1663..2e81371e04c2 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -46,6 +46,157 @@ aliases {
 		serial2 = &serial_2;
 	};
 
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_dmc CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <825000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <875000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_isp: bus-isp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_isp_opp_table>;
+		status = "disabled";
+
+		bus_isp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mcuisp: bus-mcuisp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mcuisp_opp_table>;
+		status = "disabled";
+
+		bus_mcuisp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peril: bus-peril {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peril_opp_table>;
+		status = "disabled";
+
+		bus_peril_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -129,6 +280,31 @@ xtcxo: clock-2 {
 		clock-output-names = "xtcxo";
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -771,182 +947,6 @@ ppmu_mfc: ppmu@13660000 {
 			clock-names = "ppmu";
 			status = "disabled";
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu_dmc CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table-1 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <825000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <875000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mcuisp: bus-mcuisp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mcuisp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_isp: bus-isp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_266>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_isp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peril: bus-peril {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peril_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table-2 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-			};
-		};
-
-		bus_mcuisp_opp_table: opp-table-3 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-
-		bus_isp_opp_table: opp-table-4 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_peril_opp_table: opp-table-5 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
 	};
 };
 
-- 
2.34.1

[PATCH 3/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos3250.dtsi:775.20-781.5:
    Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property

and dtbs_check:

  exynos3250-artik5-eval.dtb: soc: bus-dmc:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[67, 16]], 'clock-names': ['bus'], 'operating-points-v2': [[68]], 'status': ['disabled']} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos3250.dtsi | 352 +++++++++++++++---------------
 1 file changed, 176 insertions(+), 176 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 36b47c2c1663..2e81371e04c2 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -46,6 +46,157 @@ aliases {
 		serial2 = &serial_2;
 	};
 
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_dmc CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <825000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <875000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_isp: bus-isp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_isp_opp_table>;
+		status = "disabled";
+
+		bus_isp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mcuisp: bus-mcuisp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mcuisp_opp_table>;
+		status = "disabled";
+
+		bus_mcuisp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peril: bus-peril {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peril_opp_table>;
+		status = "disabled";
+
+		bus_peril_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -129,6 +280,31 @@ xtcxo: clock-2 {
 		clock-output-names = "xtcxo";
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -771,182 +947,6 @@ ppmu_mfc: ppmu@13660000 {
 			clock-names = "ppmu";
 			status = "disabled";
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu_dmc CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table-1 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <825000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <875000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mcuisp: bus-mcuisp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mcuisp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_isp: bus-isp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_266>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_isp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peril: bus-peril {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peril_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table-2 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-			};
-		};
-
-		bus_mcuisp_opp_table: opp-table-3 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-
-		bus_isp_opp_table: opp-table-4 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_peril_opp_table: opp-table-5 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
 	};
 };
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   exynos3250.dtsi:775.20-781.5:
>     Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos3250-artik5-eval.dtb: soc: bus-dmc:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[67, 16]], 'clock-names': ['bus'], 'operating-points-v2': [[68]], 'status': ['disabled']} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
> 

Applied.

Best regards,
Krzysztof

Re: [PATCH 3/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos3250

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   exynos3250.dtsi:775.20-781.5:
>     Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos3250-artik5-eval.dtb: soc: bus-dmc:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[67, 16]], 'clock-names': ['bus'], 'operating-points-v2': [[68]], 'status': ['disabled']} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
> 

Applied.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos4210.dtsi:218.20-224.5:
    Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property

and dtbs_check:

  exynos4210-i9100.dtb: soc: bus-dmc:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[5, 457]], 'clock-names': ['bus'], 'operating-points-v2': [[82]], 'status': ['disabled']} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos4210.dtsi | 322 +++++++++++++++---------------
 1 file changed, 161 insertions(+), 161 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index d11cbe03770d..1b4e55822e7c 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -28,6 +28,151 @@ aliases {
 		pinctrl2 = &pinctrl_2;
 	};
 
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+		};
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1050000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <1150000>;
+				opp-suspend;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-10000000 {
+				opp-hz = /bits/ 64 <10000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-5000000 {
+				opp-hz = /bits/ 64 <5000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -82,6 +227,22 @@ cpu1: cpu@901 {
 		};
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-suspend;
+		};
+	};
+
 	soc: soc {
 		sysram: sram@2020000 {
 			compatible = "mmio-sram";
@@ -214,167 +375,6 @@ sysmmu_fimd1: sysmmu@12220000 {
 			power-domains = <&pd_lcd1>;
 			#iommu-cells = <0>;
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table-1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1025000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <1050000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1150000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table-2 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table-3 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-5000000 {
-				opp-hz = /bits/ 64 <5000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table-4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-10000000 {
-				opp-hz = /bits/ 64 <10000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_display_opp_table: opp-table-5 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-		};
-
-		bus_leftbus_opp_table: opp-table-6 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-suspend;
-			};
-		};
 	};
 };
 
-- 
2.34.1

[PATCH 4/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos4210.dtsi:218.20-224.5:
    Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property

and dtbs_check:

  exynos4210-i9100.dtb: soc: bus-dmc:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[5, 457]], 'clock-names': ['bus'], 'operating-points-v2': [[82]], 'status': ['disabled']} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos4210.dtsi | 322 +++++++++++++++---------------
 1 file changed, 161 insertions(+), 161 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index d11cbe03770d..1b4e55822e7c 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -28,6 +28,151 @@ aliases {
 		pinctrl2 = &pinctrl_2;
 	};
 
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+		};
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1050000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <1150000>;
+				opp-suspend;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-10000000 {
+				opp-hz = /bits/ 64 <10000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-5000000 {
+				opp-hz = /bits/ 64 <5000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -82,6 +227,22 @@ cpu1: cpu@901 {
 		};
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-suspend;
+		};
+	};
+
 	soc: soc {
 		sysram: sram@2020000 {
 			compatible = "mmio-sram";
@@ -214,167 +375,6 @@ sysmmu_fimd1: sysmmu@12220000 {
 			power-domains = <&pd_lcd1>;
 			#iommu-cells = <0>;
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table-1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1025000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <1050000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1150000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table-2 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table-3 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-5000000 {
-				opp-hz = /bits/ 64 <5000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table-4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-10000000 {
-				opp-hz = /bits/ 64 <10000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_display_opp_table: opp-table-5 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-		};
-
-		bus_leftbus_opp_table: opp-table-6 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-suspend;
-			};
-		};
 	};
 };
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   exynos4210.dtsi:218.20-224.5:
>     Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos4210-i9100.dtb: soc: bus-dmc:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[5, 457]], 'clock-names': ['bus'], 'operating-points-v2': [[82]], 'status': ['disabled']} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
> 

Applied.

Best regards,
Krzysztof

Re: [PATCH 4/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4210

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   exynos4210.dtsi:218.20-224.5:
>     Warning (simple_bus_reg): /soc/bus-dmc: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos4210-i9100.dtb: soc: bus-dmc:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[5, 457]], 'clock-names': ['bus'], 'operating-points-v2': [[82]], 'status': ['disabled']} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
> 

Applied.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos4412.dtsi:407.20-413.5:
    Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property

and dtbs_check:

  exynos4412-i9300.dtb: soc: bus-acp:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos4412.dtsi | 351 +++++++++++++++---------------
 1 file changed, 175 insertions(+), 176 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index c02865ff0761..f34c7400475b 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -31,6 +31,134 @@ aliases {
 		mshc0 = &mshc_0;
 	};
 
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+	};
+
+	bus_c2c: bus-c2c {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_C2C>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		samsung,data-clock-ratio = <4>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		interconnects = <&bus_leftbus &bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		interconnects = <&bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -171,6 +299,53 @@ cpu0_opp_1500: opp-1500000000 {
 		};
 	};
 
+	bus_dmc_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+			opp-suspend;
+		};
+	};
+
+	bus_leftbus_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+			opp-suspend;
+		};
+	};
 
 	soc: soc {
 
@@ -393,182 +568,6 @@ sysmmu_fimc_lite1: sysmmu@123c0000 {
 				 <&isp_clock CLK_ISP_FIMC_LITE1>;
 			#iommu-cells = <0>;
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_c2c: bus-c2c {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_C2C>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table-1 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1050000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table-2 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			interconnects = <&bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table-3 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <925000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-				opp-suspend;
-			};
-		};
-
-		bus_display_opp_table: opp-table-4 {
-			compatible = "operating-points-v2";
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table-5 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table-6 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
 	};
 };
 
-- 
2.34.1

[PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos4412.dtsi:407.20-413.5:
    Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property

and dtbs_check:

  exynos4412-i9300.dtb: soc: bus-acp:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.
Re-order them alphabetically while moving and put some of the OPP tables
in device nodes (if they are not shared).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos4412.dtsi | 351 +++++++++++++++---------------
 1 file changed, 175 insertions(+), 176 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index c02865ff0761..f34c7400475b 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -31,6 +31,134 @@ aliases {
 		mshc0 = &mshc_0;
 	};
 
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+	};
+
+	bus_c2c: bus-c2c {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_C2C>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		samsung,data-clock-ratio = <4>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		interconnects = <&bus_leftbus &bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		interconnects = <&bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -171,6 +299,53 @@ cpu0_opp_1500: opp-1500000000 {
 		};
 	};
 
+	bus_dmc_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+			opp-suspend;
+		};
+	};
+
+	bus_leftbus_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+			opp-suspend;
+		};
+	};
 
 	soc: soc {
 
@@ -393,182 +568,6 @@ sysmmu_fimc_lite1: sysmmu@123c0000 {
 				 <&isp_clock CLK_ISP_FIMC_LITE1>;
 			#iommu-cells = <0>;
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_c2c: bus-c2c {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_C2C>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table-1 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1050000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table-2 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			interconnects = <&bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table-3 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <925000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-				opp-suspend;
-			};
-		};
-
-		bus_display_opp_table: opp-table-4 {
-			compatible = "operating-points-v2";
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table-5 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table-6 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
 	};
 };
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   exynos4412.dtsi:407.20-413.5:
>     Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos4412-i9300.dtb: soc: bus-acp:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
> 

Applied.

Best regards,
Krzysztof

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> as reported by dtc W=1:
> 
>   exynos4412.dtsi:407.20-413.5:
>     Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
> 
> and dtbs_check:
> 
>   exynos4412-i9300.dtb: soc: bus-acp:
>     {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
> 
> Move the bus nodes and their OPP tables out of SoC to fix this.
> Re-order them alphabetically while moving and put some of the OPP tables
> in device nodes (if they are not shared).
> 

Applied.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

Hi Krzysztof,

On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>> The soc node is supposed to have only device nodes with MMIO addresses,
>> as reported by dtc W=1:
>>
>>    exynos4412.dtsi:407.20-413.5:
>>      Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>
>> and dtbs_check:
>>
>>    exynos4412-i9300.dtb: soc: bus-acp:
>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>
>> Move the bus nodes and their OPP tables out of SoC to fix this.
>> Re-order them alphabetically while moving and put some of the OPP tables
>> in device nodes (if they are not shared).
>>
> Applied.

I don't have a good news. It looks that this change is responsible for 
breaking boards that were rock-stable so far, like Odroid U3. I didn't 
manage to analyze what exactly causes the issue, but it looks that the 
exynos-bus devfreq driver somehow depends on the order of the nodes:

(before)

# dmesg | grep exynos-bus
[    6.415266] exynos-bus: new bus device registered: soc:bus-dmc 
(100000 KHz ~ 400000 KHz)
[    6.422717] exynos-bus: new bus device registered: soc:bus-acp 
(100000 KHz ~ 267000 KHz)
[    6.454323] exynos-bus: new bus device registered: soc:bus-c2c 
(100000 KHz ~ 400000 KHz)
[    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus 
(100000 KHz ~ 200000 KHz)
[    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus 
(100000 KHz ~ 200000 KHz)
[    6.494612] exynos-bus: new bus device registered: soc:bus-display 
(160000 KHz ~ 200000 KHz)
[    6.494932] exynos-bus: new bus device registered: soc:bus-fsys 
(100000 KHz ~ 134000 KHz)
[    6.495246] exynos-bus: new bus device registered: soc:bus-peri ( 
50000 KHz ~ 100000 KHz)
[    6.495577] exynos-bus: new bus device registered: soc:bus-mfc 
(100000 KHz ~ 200000 KHz)

(after)

# dmesg | grep exynos-bus

[    6.082032] exynos-bus: new bus device registered: bus-dmc (100000 
KHz ~ 400000 KHz)
[    6.122726] exynos-bus: new bus device registered: bus-leftbus 
(100000 KHz ~ 200000 KHz)
[    6.146705] exynos-bus: new bus device registered: bus-mfc (100000 
KHz ~ 200000 KHz)
[    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000 
KHz ~ 100000 KHz)
[    6.204770] exynos-bus: new bus device registered: bus-rightbus 
(100000 KHz ~ 200000 KHz)
[    6.211087] exynos-bus: new bus device registered: bus-acp (100000 
KHz ~ 267000 KHz)
[    6.216936] exynos-bus: new bus device registered: bus-c2c (100000 
KHz ~ 400000 KHz)
[    6.225748] exynos-bus: new bus device registered: bus-display 
(160000 KHz ~ 200000 KHz)
[    6.242978] exynos-bus: new bus device registered: bus-fsys (100000 
KHz ~ 134000 KHz)

This is definitely a driver bug, but so far it worked fine, so this is a 
regression that need to be addressed somehow...

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

Hi Krzysztof,

On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>> The soc node is supposed to have only device nodes with MMIO addresses,
>> as reported by dtc W=1:
>>
>>    exynos4412.dtsi:407.20-413.5:
>>      Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>
>> and dtbs_check:
>>
>>    exynos4412-i9300.dtb: soc: bus-acp:
>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>
>> Move the bus nodes and their OPP tables out of SoC to fix this.
>> Re-order them alphabetically while moving and put some of the OPP tables
>> in device nodes (if they are not shared).
>>
> Applied.

I don't have a good news. It looks that this change is responsible for 
breaking boards that were rock-stable so far, like Odroid U3. I didn't 
manage to analyze what exactly causes the issue, but it looks that the 
exynos-bus devfreq driver somehow depends on the order of the nodes:

(before)

# dmesg | grep exynos-bus
[    6.415266] exynos-bus: new bus device registered: soc:bus-dmc 
(100000 KHz ~ 400000 KHz)
[    6.422717] exynos-bus: new bus device registered: soc:bus-acp 
(100000 KHz ~ 267000 KHz)
[    6.454323] exynos-bus: new bus device registered: soc:bus-c2c 
(100000 KHz ~ 400000 KHz)
[    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus 
(100000 KHz ~ 200000 KHz)
[    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus 
(100000 KHz ~ 200000 KHz)
[    6.494612] exynos-bus: new bus device registered: soc:bus-display 
(160000 KHz ~ 200000 KHz)
[    6.494932] exynos-bus: new bus device registered: soc:bus-fsys 
(100000 KHz ~ 134000 KHz)
[    6.495246] exynos-bus: new bus device registered: soc:bus-peri ( 
50000 KHz ~ 100000 KHz)
[    6.495577] exynos-bus: new bus device registered: soc:bus-mfc 
(100000 KHz ~ 200000 KHz)

(after)

# dmesg | grep exynos-bus

[    6.082032] exynos-bus: new bus device registered: bus-dmc (100000 
KHz ~ 400000 KHz)
[    6.122726] exynos-bus: new bus device registered: bus-leftbus 
(100000 KHz ~ 200000 KHz)
[    6.146705] exynos-bus: new bus device registered: bus-mfc (100000 
KHz ~ 200000 KHz)
[    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000 
KHz ~ 100000 KHz)
[    6.204770] exynos-bus: new bus device registered: bus-rightbus 
(100000 KHz ~ 200000 KHz)
[    6.211087] exynos-bus: new bus device registered: bus-acp (100000 
KHz ~ 267000 KHz)
[    6.216936] exynos-bus: new bus device registered: bus-c2c (100000 
KHz ~ 400000 KHz)
[    6.225748] exynos-bus: new bus device registered: bus-display 
(160000 KHz ~ 200000 KHz)
[    6.242978] exynos-bus: new bus device registered: bus-fsys (100000 
KHz ~ 134000 KHz)

This is definitely a driver bug, but so far it worked fine, so this is a 
regression that need to be addressed somehow...

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 12:45, Marek Szyprowski wrote:
> Hi Krzysztof,
> 
> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>> as reported by dtc W=1:
>>>
>>>    exynos4412.dtsi:407.20-413.5:
>>>      Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>
>>> and dtbs_check:
>>>
>>>    exynos4412-i9300.dtb: soc: bus-acp:
>>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>
>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>> Re-order them alphabetically while moving and put some of the OPP tables
>>> in device nodes (if they are not shared).
>>>
>> Applied.
> 
> I don't have a good news. It looks that this change is responsible for 
> breaking boards that were rock-stable so far, like Odroid U3. I didn't 
> manage to analyze what exactly causes the issue, but it looks that the 
> exynos-bus devfreq driver somehow depends on the order of the nodes:
> 
> (before)
> 
> # dmesg | grep exynos-bus
> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc 
> (100000 KHz ~ 400000 KHz)
> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp 
> (100000 KHz ~ 267000 KHz)
> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c 
> (100000 KHz ~ 400000 KHz)
> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus 
> (100000 KHz ~ 200000 KHz)
> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus 
> (100000 KHz ~ 200000 KHz)
> [    6.494612] exynos-bus: new bus device registered: soc:bus-display 
> (160000 KHz ~ 200000 KHz)
> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys 
> (100000 KHz ~ 134000 KHz)
> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri ( 
> 50000 KHz ~ 100000 KHz)
> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc 
> (100000 KHz ~ 200000 KHz)
> 
> (after)
> 
> # dmesg | grep exynos-bus
> 
> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000 
> KHz ~ 400000 KHz)
> [    6.122726] exynos-bus: new bus device registered: bus-leftbus 
> (100000 KHz ~ 200000 KHz)
> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000 
> KHz ~ 200000 KHz)
> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000 
> KHz ~ 100000 KHz)
> [    6.204770] exynos-bus: new bus device registered: bus-rightbus 
> (100000 KHz ~ 200000 KHz)
> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000 
> KHz ~ 267000 KHz)
> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000 
> KHz ~ 400000 KHz)
> [    6.225748] exynos-bus: new bus device registered: bus-display 
> (160000 KHz ~ 200000 KHz)
> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000 
> KHz ~ 134000 KHz)
> 
> This is definitely a driver bug, but so far it worked fine, so this is a 
> regression that need to be addressed somehow...


Thanks for checking, but what is exactly the bug? The devices registered
- just with different name.

Best regards,
Krzysztof

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 12:45, Marek Szyprowski wrote:
> Hi Krzysztof,
> 
> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>> as reported by dtc W=1:
>>>
>>>    exynos4412.dtsi:407.20-413.5:
>>>      Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>
>>> and dtbs_check:
>>>
>>>    exynos4412-i9300.dtb: soc: bus-acp:
>>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>
>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>> Re-order them alphabetically while moving and put some of the OPP tables
>>> in device nodes (if they are not shared).
>>>
>> Applied.
> 
> I don't have a good news. It looks that this change is responsible for 
> breaking boards that were rock-stable so far, like Odroid U3. I didn't 
> manage to analyze what exactly causes the issue, but it looks that the 
> exynos-bus devfreq driver somehow depends on the order of the nodes:
> 
> (before)
> 
> # dmesg | grep exynos-bus
> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc 
> (100000 KHz ~ 400000 KHz)
> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp 
> (100000 KHz ~ 267000 KHz)
> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c 
> (100000 KHz ~ 400000 KHz)
> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus 
> (100000 KHz ~ 200000 KHz)
> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus 
> (100000 KHz ~ 200000 KHz)
> [    6.494612] exynos-bus: new bus device registered: soc:bus-display 
> (160000 KHz ~ 200000 KHz)
> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys 
> (100000 KHz ~ 134000 KHz)
> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri ( 
> 50000 KHz ~ 100000 KHz)
> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc 
> (100000 KHz ~ 200000 KHz)
> 
> (after)
> 
> # dmesg | grep exynos-bus
> 
> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000 
> KHz ~ 400000 KHz)
> [    6.122726] exynos-bus: new bus device registered: bus-leftbus 
> (100000 KHz ~ 200000 KHz)
> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000 
> KHz ~ 200000 KHz)
> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000 
> KHz ~ 100000 KHz)
> [    6.204770] exynos-bus: new bus device registered: bus-rightbus 
> (100000 KHz ~ 200000 KHz)
> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000 
> KHz ~ 267000 KHz)
> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000 
> KHz ~ 400000 KHz)
> [    6.225748] exynos-bus: new bus device registered: bus-display 
> (160000 KHz ~ 200000 KHz)
> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000 
> KHz ~ 134000 KHz)
> 
> This is definitely a driver bug, but so far it worked fine, so this is a 
> regression that need to be addressed somehow...


Thanks for checking, but what is exactly the bug? The devices registered
- just with different name.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
> On 03/02/2023 12:45, Marek Szyprowski wrote:
>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>> as reported by dtc W=1:
>>>>
>>>>     exynos4412.dtsi:407.20-413.5:
>>>>       Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>
>>>> and dtbs_check:
>>>>
>>>>     exynos4412-i9300.dtb: soc: bus-acp:
>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>
>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>> in device nodes (if they are not shared).
>>>>
>>> Applied.
>> I don't have a good news. It looks that this change is responsible for
>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>> manage to analyze what exactly causes the issue, but it looks that the
>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>
>> (before)
>>
>> # dmesg | grep exynos-bus
>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>> (100000 KHz ~ 400000 KHz)
>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>> (100000 KHz ~ 267000 KHz)
>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>> (100000 KHz ~ 400000 KHz)
>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>> (160000 KHz ~ 200000 KHz)
>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>> (100000 KHz ~ 134000 KHz)
>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>> 50000 KHz ~ 100000 KHz)
>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>> (100000 KHz ~ 200000 KHz)
>>
>> (after)
>>
>> # dmesg | grep exynos-bus
>>
>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>> KHz ~ 400000 KHz)
>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>> KHz ~ 200000 KHz)
>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>> KHz ~ 100000 KHz)
>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>> KHz ~ 267000 KHz)
>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>> KHz ~ 400000 KHz)
>> [    6.225748] exynos-bus: new bus device registered: bus-display
>> (160000 KHz ~ 200000 KHz)
>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>> KHz ~ 134000 KHz)
>>
>> This is definitely a driver bug, but so far it worked fine, so this is a
>> regression that need to be addressed somehow...
>
> Thanks for checking, but what is exactly the bug? The devices registered
> - just with different name.

The bug is that the board fails to boot from time to time, freezing 
after registering PPMU counters...

Best regards

-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
> On 03/02/2023 12:45, Marek Szyprowski wrote:
>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>> as reported by dtc W=1:
>>>>
>>>>     exynos4412.dtsi:407.20-413.5:
>>>>       Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>
>>>> and dtbs_check:
>>>>
>>>>     exynos4412-i9300.dtb: soc: bus-acp:
>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>
>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>> in device nodes (if they are not shared).
>>>>
>>> Applied.
>> I don't have a good news. It looks that this change is responsible for
>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>> manage to analyze what exactly causes the issue, but it looks that the
>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>
>> (before)
>>
>> # dmesg | grep exynos-bus
>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>> (100000 KHz ~ 400000 KHz)
>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>> (100000 KHz ~ 267000 KHz)
>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>> (100000 KHz ~ 400000 KHz)
>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>> (160000 KHz ~ 200000 KHz)
>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>> (100000 KHz ~ 134000 KHz)
>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>> 50000 KHz ~ 100000 KHz)
>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>> (100000 KHz ~ 200000 KHz)
>>
>> (after)
>>
>> # dmesg | grep exynos-bus
>>
>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>> KHz ~ 400000 KHz)
>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>> KHz ~ 200000 KHz)
>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>> KHz ~ 100000 KHz)
>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>> (100000 KHz ~ 200000 KHz)
>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>> KHz ~ 267000 KHz)
>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>> KHz ~ 400000 KHz)
>> [    6.225748] exynos-bus: new bus device registered: bus-display
>> (160000 KHz ~ 200000 KHz)
>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>> KHz ~ 134000 KHz)
>>
>> This is definitely a driver bug, but so far it worked fine, so this is a
>> regression that need to be addressed somehow...
>
> Thanks for checking, but what is exactly the bug? The devices registered
> - just with different name.

The bug is that the board fails to boot from time to time, freezing 
after registering PPMU counters...

Best regards

-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 12:51, Marek Szyprowski wrote:
> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>> as reported by dtc W=1:
>>>>>
>>>>>     exynos4412.dtsi:407.20-413.5:
>>>>>       Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>
>>>>> and dtbs_check:
>>>>>
>>>>>     exynos4412-i9300.dtb: soc: bus-acp:
>>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>
>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>> in device nodes (if they are not shared).
>>>>>
>>>> Applied.
>>> I don't have a good news. It looks that this change is responsible for
>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>> manage to analyze what exactly causes the issue, but it looks that the
>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>
>>> (before)
>>>
>>> # dmesg | grep exynos-bus
>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>> (100000 KHz ~ 400000 KHz)
>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>> (100000 KHz ~ 267000 KHz)
>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>> (100000 KHz ~ 400000 KHz)
>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>> (160000 KHz ~ 200000 KHz)
>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>> (100000 KHz ~ 134000 KHz)
>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>> 50000 KHz ~ 100000 KHz)
>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>> (100000 KHz ~ 200000 KHz)
>>>
>>> (after)
>>>
>>> # dmesg | grep exynos-bus
>>>
>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>> KHz ~ 400000 KHz)
>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>> KHz ~ 200000 KHz)
>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>> KHz ~ 100000 KHz)
>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>> KHz ~ 267000 KHz)
>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>> KHz ~ 400000 KHz)
>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>> (160000 KHz ~ 200000 KHz)
>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>> KHz ~ 134000 KHz)
>>>
>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>> regression that need to be addressed somehow...
>>
>> Thanks for checking, but what is exactly the bug? The devices registered
>> - just with different name.
> 
> The bug is that the board fails to boot from time to time, freezing 
> after registering PPMU counters...

My U3 with and without this patch, reports several warnings:
iommu_group_do_set_platform_dma()
exynos_iommu_domain_free()
clk_core_enable()

and finally:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:

and keeps stalling.

At least on next-20230203. Except all these (which anyway make board
unbootable) look fine around PMU and exynos-bus.

Best regards,
Krzysztof

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 12:51, Marek Szyprowski wrote:
> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>> as reported by dtc W=1:
>>>>>
>>>>>     exynos4412.dtsi:407.20-413.5:
>>>>>       Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>
>>>>> and dtbs_check:
>>>>>
>>>>>     exynos4412-i9300.dtb: soc: bus-acp:
>>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>
>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>> in device nodes (if they are not shared).
>>>>>
>>>> Applied.
>>> I don't have a good news. It looks that this change is responsible for
>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>> manage to analyze what exactly causes the issue, but it looks that the
>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>
>>> (before)
>>>
>>> # dmesg | grep exynos-bus
>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>> (100000 KHz ~ 400000 KHz)
>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>> (100000 KHz ~ 267000 KHz)
>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>> (100000 KHz ~ 400000 KHz)
>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>> (160000 KHz ~ 200000 KHz)
>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>> (100000 KHz ~ 134000 KHz)
>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>> 50000 KHz ~ 100000 KHz)
>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>> (100000 KHz ~ 200000 KHz)
>>>
>>> (after)
>>>
>>> # dmesg | grep exynos-bus
>>>
>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>> KHz ~ 400000 KHz)
>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>> KHz ~ 200000 KHz)
>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>> KHz ~ 100000 KHz)
>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>> (100000 KHz ~ 200000 KHz)
>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>> KHz ~ 267000 KHz)
>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>> KHz ~ 400000 KHz)
>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>> (160000 KHz ~ 200000 KHz)
>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>> KHz ~ 134000 KHz)
>>>
>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>> regression that need to be addressed somehow...
>>
>> Thanks for checking, but what is exactly the bug? The devices registered
>> - just with different name.
> 
> The bug is that the board fails to boot from time to time, freezing 
> after registering PPMU counters...

My U3 with and without this patch, reports several warnings:
iommu_group_do_set_platform_dma()
exynos_iommu_domain_free()
clk_core_enable()

and finally:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:

and keeps stalling.

At least on next-20230203. Except all these (which anyway make board
unbootable) look fine around PMU and exynos-bus.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
> On 03/02/2023 12:51, Marek Szyprowski wrote:
>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>> as reported by dtc W=1:
>>>>>>
>>>>>>     exynos4412.dtsi:407.20-413.5:
>>>>>>       Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>
>>>>>> and dtbs_check:
>>>>>>
>>>>>>     exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>
>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>> in device nodes (if they are not shared).
>>>>>>
>>>>> Applied.
>>>> I don't have a good news. It looks that this change is responsible for
>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>
>>>> (before)
>>>>
>>>> # dmesg | grep exynos-bus
>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>> (100000 KHz ~ 400000 KHz)
>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>> (100000 KHz ~ 267000 KHz)
>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>> (100000 KHz ~ 400000 KHz)
>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>> (160000 KHz ~ 200000 KHz)
>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>> (100000 KHz ~ 134000 KHz)
>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>> 50000 KHz ~ 100000 KHz)
>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>> (100000 KHz ~ 200000 KHz)
>>>>
>>>> (after)
>>>>
>>>> # dmesg | grep exynos-bus
>>>>
>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>> KHz ~ 400000 KHz)
>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>> KHz ~ 200000 KHz)
>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>> KHz ~ 100000 KHz)
>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>> KHz ~ 267000 KHz)
>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>> KHz ~ 400000 KHz)
>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>> (160000 KHz ~ 200000 KHz)
>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>> KHz ~ 134000 KHz)
>>>>
>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>> regression that need to be addressed somehow...
>>>
>>> Thanks for checking, but what is exactly the bug? The devices registered
>>> - just with different name.
>>
>> The bug is that the board fails to boot from time to time, freezing 
>> after registering PPMU counters...
> 
> My U3 with and without this patch, reports several warnings:
> iommu_group_do_set_platform_dma()
> exynos_iommu_domain_free()
> clk_core_enable()
> 
> and finally:
> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> 
> and keeps stalling.
> 
> At least on next-20230203. Except all these (which anyway make board
> unbootable) look fine around PMU and exynos-bus.

I also booted few times my next/dt branch (with this patch) and no
problems. How reproducible is the issue you experience?

Best regards,
Krzysztof

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
> On 03/02/2023 12:51, Marek Szyprowski wrote:
>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>> as reported by dtc W=1:
>>>>>>
>>>>>>     exynos4412.dtsi:407.20-413.5:
>>>>>>       Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>
>>>>>> and dtbs_check:
>>>>>>
>>>>>>     exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>
>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>> in device nodes (if they are not shared).
>>>>>>
>>>>> Applied.
>>>> I don't have a good news. It looks that this change is responsible for
>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>
>>>> (before)
>>>>
>>>> # dmesg | grep exynos-bus
>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>> (100000 KHz ~ 400000 KHz)
>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>> (100000 KHz ~ 267000 KHz)
>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>> (100000 KHz ~ 400000 KHz)
>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>> (160000 KHz ~ 200000 KHz)
>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>> (100000 KHz ~ 134000 KHz)
>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>> 50000 KHz ~ 100000 KHz)
>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>> (100000 KHz ~ 200000 KHz)
>>>>
>>>> (after)
>>>>
>>>> # dmesg | grep exynos-bus
>>>>
>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>> KHz ~ 400000 KHz)
>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>> KHz ~ 200000 KHz)
>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>> KHz ~ 100000 KHz)
>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>> KHz ~ 267000 KHz)
>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>> KHz ~ 400000 KHz)
>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>> (160000 KHz ~ 200000 KHz)
>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>> KHz ~ 134000 KHz)
>>>>
>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>> regression that need to be addressed somehow...
>>>
>>> Thanks for checking, but what is exactly the bug? The devices registered
>>> - just with different name.
>>
>> The bug is that the board fails to boot from time to time, freezing 
>> after registering PPMU counters...
> 
> My U3 with and without this patch, reports several warnings:
> iommu_group_do_set_platform_dma()
> exynos_iommu_domain_free()
> clk_core_enable()
> 
> and finally:
> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> 
> and keeps stalling.
> 
> At least on next-20230203. Except all these (which anyway make board
> unbootable) look fine around PMU and exynos-bus.

I also booted few times my next/dt branch (with this patch) and no
problems. How reproducible is the issue you experience?

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>> as reported by dtc W=1:
>>>>>>>
>>>>>>>      exynos4412.dtsi:407.20-413.5:
>>>>>>>        Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>
>>>>>>> and dtbs_check:
>>>>>>>
>>>>>>>      exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>        {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>
>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>> in device nodes (if they are not shared).
>>>>>>>
>>>>>> Applied.
>>>>> I don't have a good news. It looks that this change is responsible for
>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>
>>>>> (before)
>>>>>
>>>>> # dmesg | grep exynos-bus
>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>> (100000 KHz ~ 400000 KHz)
>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>> (100000 KHz ~ 267000 KHz)
>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>> (100000 KHz ~ 400000 KHz)
>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>> (160000 KHz ~ 200000 KHz)
>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>> (100000 KHz ~ 134000 KHz)
>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>> 50000 KHz ~ 100000 KHz)
>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>> (100000 KHz ~ 200000 KHz)
>>>>>
>>>>> (after)
>>>>>
>>>>> # dmesg | grep exynos-bus
>>>>>
>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>> KHz ~ 400000 KHz)
>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>> KHz ~ 200000 KHz)
>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>> KHz ~ 100000 KHz)
>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>> KHz ~ 267000 KHz)
>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>> KHz ~ 400000 KHz)
>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>> (160000 KHz ~ 200000 KHz)
>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>> KHz ~ 134000 KHz)
>>>>>
>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>> regression that need to be addressed somehow...
>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>> - just with different name.
>>> The bug is that the board fails to boot from time to time, freezing
>>> after registering PPMU counters...
>> My U3 with and without this patch, reports several warnings:
>> iommu_group_do_set_platform_dma()
>> exynos_iommu_domain_free()
>> clk_core_enable()
>>
>> and finally:
>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>
>> and keeps stalling.
>>
>> At least on next-20230203. Except all these (which anyway make board
>> unbootable) look fine around PMU and exynos-bus.
> I also booted few times my next/dt branch (with this patch) and no
> problems. How reproducible is the issue you experience?

IOMMU needs a fixup, that has been merged today:

https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/

I was initially convinced that this freeze is somehow related to this 
IOMMU fixup, but it turned out that the devfreq is a source of the problems.

The freeze happens here about 1 of 10 boots, usually with kernel 
compiled from multi_v7_defconfig, while loading the PPMU modules. It 
happens on your next/dt branch too.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>> as reported by dtc W=1:
>>>>>>>
>>>>>>>      exynos4412.dtsi:407.20-413.5:
>>>>>>>        Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>
>>>>>>> and dtbs_check:
>>>>>>>
>>>>>>>      exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>        {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>
>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>> in device nodes (if they are not shared).
>>>>>>>
>>>>>> Applied.
>>>>> I don't have a good news. It looks that this change is responsible for
>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>
>>>>> (before)
>>>>>
>>>>> # dmesg | grep exynos-bus
>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>> (100000 KHz ~ 400000 KHz)
>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>> (100000 KHz ~ 267000 KHz)
>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>> (100000 KHz ~ 400000 KHz)
>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>> (160000 KHz ~ 200000 KHz)
>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>> (100000 KHz ~ 134000 KHz)
>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>> 50000 KHz ~ 100000 KHz)
>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>> (100000 KHz ~ 200000 KHz)
>>>>>
>>>>> (after)
>>>>>
>>>>> # dmesg | grep exynos-bus
>>>>>
>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>> KHz ~ 400000 KHz)
>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>> KHz ~ 200000 KHz)
>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>> KHz ~ 100000 KHz)
>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>> KHz ~ 267000 KHz)
>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>> KHz ~ 400000 KHz)
>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>> (160000 KHz ~ 200000 KHz)
>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>> KHz ~ 134000 KHz)
>>>>>
>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>> regression that need to be addressed somehow...
>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>> - just with different name.
>>> The bug is that the board fails to boot from time to time, freezing
>>> after registering PPMU counters...
>> My U3 with and without this patch, reports several warnings:
>> iommu_group_do_set_platform_dma()
>> exynos_iommu_domain_free()
>> clk_core_enable()
>>
>> and finally:
>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>
>> and keeps stalling.
>>
>> At least on next-20230203. Except all these (which anyway make board
>> unbootable) look fine around PMU and exynos-bus.
> I also booted few times my next/dt branch (with this patch) and no
> problems. How reproducible is the issue you experience?

IOMMU needs a fixup, that has been merged today:

https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/

I was initially convinced that this freeze is somehow related to this 
IOMMU fixup, but it turned out that the devfreq is a source of the problems.

The freeze happens here about 1 of 10 boots, usually with kernel 
compiled from multi_v7_defconfig, while loading the PPMU modules. It 
happens on your next/dt branch too.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 23:50, Marek Szyprowski wrote:
> On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
>> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>>> as reported by dtc W=1:
>>>>>>>>
>>>>>>>>      exynos4412.dtsi:407.20-413.5:
>>>>>>>>        Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>>
>>>>>>>> and dtbs_check:
>>>>>>>>
>>>>>>>>      exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>>        {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>>
>>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>>> in device nodes (if they are not shared).
>>>>>>>>
>>>>>>> Applied.
>>>>>> I don't have a good news. It looks that this change is responsible for
>>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>>
>>>>>> (before)
>>>>>>
>>>>>> # dmesg | grep exynos-bus
>>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>>> (100000 KHz ~ 267000 KHz)
>>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>>> (100000 KHz ~ 134000 KHz)
>>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>>> 50000 KHz ~ 100000 KHz)
>>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>
>>>>>> (after)
>>>>>>
>>>>>> # dmesg | grep exynos-bus
>>>>>>
>>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>>> KHz ~ 400000 KHz)
>>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>>> KHz ~ 200000 KHz)
>>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>>> KHz ~ 100000 KHz)
>>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>>> KHz ~ 267000 KHz)
>>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>>> KHz ~ 400000 KHz)
>>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>>> KHz ~ 134000 KHz)
>>>>>>
>>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>>> regression that need to be addressed somehow...
>>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>>> - just with different name.
>>>> The bug is that the board fails to boot from time to time, freezing
>>>> after registering PPMU counters...
>>> My U3 with and without this patch, reports several warnings:
>>> iommu_group_do_set_platform_dma()
>>> exynos_iommu_domain_free()
>>> clk_core_enable()
>>>
>>> and finally:
>>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>
>>> and keeps stalling.
>>>
>>> At least on next-20230203. Except all these (which anyway make board
>>> unbootable) look fine around PMU and exynos-bus.
>> I also booted few times my next/dt branch (with this patch) and no
>> problems. How reproducible is the issue you experience?
> 
> IOMMU needs a fixup, that has been merged today:
> 
> https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/
> 
> I was initially convinced that this freeze is somehow related to this 
> IOMMU fixup, but it turned out that the devfreq is a source of the problems.
> 
> The freeze happens here about 1 of 10 boots, usually with kernel 
> compiled from multi_v7_defconfig, while loading the PPMU modules. It 
> happens on your next/dt branch too.

I was able to reproduce it easily with multi_v7. Then I commented out
dmc bus which fixed the issue. Then I commented out acp and c2c buses
(children/passive) which also fixed the issue. Then I uncommented
everything and went back to next/dt - exactly the same as it was failing
- and since then I cannot reproduce it. I triple checked, but now my
multi_v7 on U3 on next/dt boots perfectly fine. Every time.

Best regards,
Krzysztof

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 03/02/2023 23:50, Marek Szyprowski wrote:
> On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
>> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>>> as reported by dtc W=1:
>>>>>>>>
>>>>>>>>      exynos4412.dtsi:407.20-413.5:
>>>>>>>>        Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>>
>>>>>>>> and dtbs_check:
>>>>>>>>
>>>>>>>>      exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>>        {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>>
>>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>>> in device nodes (if they are not shared).
>>>>>>>>
>>>>>>> Applied.
>>>>>> I don't have a good news. It looks that this change is responsible for
>>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>>
>>>>>> (before)
>>>>>>
>>>>>> # dmesg | grep exynos-bus
>>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>>> (100000 KHz ~ 267000 KHz)
>>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>>> (100000 KHz ~ 134000 KHz)
>>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>>> 50000 KHz ~ 100000 KHz)
>>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>
>>>>>> (after)
>>>>>>
>>>>>> # dmesg | grep exynos-bus
>>>>>>
>>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>>> KHz ~ 400000 KHz)
>>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>>> KHz ~ 200000 KHz)
>>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>>> KHz ~ 100000 KHz)
>>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>>> KHz ~ 267000 KHz)
>>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>>> KHz ~ 400000 KHz)
>>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>>> KHz ~ 134000 KHz)
>>>>>>
>>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>>> regression that need to be addressed somehow...
>>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>>> - just with different name.
>>>> The bug is that the board fails to boot from time to time, freezing
>>>> after registering PPMU counters...
>>> My U3 with and without this patch, reports several warnings:
>>> iommu_group_do_set_platform_dma()
>>> exynos_iommu_domain_free()
>>> clk_core_enable()
>>>
>>> and finally:
>>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>
>>> and keeps stalling.
>>>
>>> At least on next-20230203. Except all these (which anyway make board
>>> unbootable) look fine around PMU and exynos-bus.
>> I also booted few times my next/dt branch (with this patch) and no
>> problems. How reproducible is the issue you experience?
> 
> IOMMU needs a fixup, that has been merged today:
> 
> https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/
> 
> I was initially convinced that this freeze is somehow related to this 
> IOMMU fixup, but it turned out that the devfreq is a source of the problems.
> 
> The freeze happens here about 1 of 10 boots, usually with kernel 
> compiled from multi_v7_defconfig, while loading the PPMU modules. It 
> happens on your next/dt branch too.

I was able to reproduce it easily with multi_v7. Then I commented out
dmc bus which fixed the issue. Then I commented out acp and c2c buses
(children/passive) which also fixed the issue. Then I uncommented
everything and went back to next/dt - exactly the same as it was failing
- and since then I cannot reproduce it. I triple checked, but now my
multi_v7 on U3 on next/dt boots perfectly fine. Every time.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

On 06.02.2023 17:12, Krzysztof Kozlowski wrote:
> On 03/02/2023 23:50, Marek Szyprowski wrote:
>> On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>>>> as reported by dtc W=1:
>>>>>>>>>
>>>>>>>>>       exynos4412.dtsi:407.20-413.5:
>>>>>>>>>         Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>>>
>>>>>>>>> and dtbs_check:
>>>>>>>>>
>>>>>>>>>       exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>>>         {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>>>
>>>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>>>> in device nodes (if they are not shared).
>>>>>>>>>
>>>>>>>> Applied.
>>>>>>> I don't have a good news. It looks that this change is responsible for
>>>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>>>
>>>>>>> (before)
>>>>>>>
>>>>>>> # dmesg | grep exynos-bus
>>>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>>>> (100000 KHz ~ 267000 KHz)
>>>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>>>> (100000 KHz ~ 134000 KHz)
>>>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>>>> 50000 KHz ~ 100000 KHz)
>>>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>
>>>>>>> (after)
>>>>>>>
>>>>>>> # dmesg | grep exynos-bus
>>>>>>>
>>>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>>>> KHz ~ 400000 KHz)
>>>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>>>> KHz ~ 200000 KHz)
>>>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>>>> KHz ~ 100000 KHz)
>>>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>>>> KHz ~ 267000 KHz)
>>>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>>>> KHz ~ 400000 KHz)
>>>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>>>> KHz ~ 134000 KHz)
>>>>>>>
>>>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>>>> regression that need to be addressed somehow...
>>>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>>>> - just with different name.
>>>>> The bug is that the board fails to boot from time to time, freezing
>>>>> after registering PPMU counters...
>>>> My U3 with and without this patch, reports several warnings:
>>>> iommu_group_do_set_platform_dma()
>>>> exynos_iommu_domain_free()
>>>> clk_core_enable()
>>>>
>>>> and finally:
>>>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>>
>>>> and keeps stalling.
>>>>
>>>> At least on next-20230203. Except all these (which anyway make board
>>>> unbootable) look fine around PMU and exynos-bus.
>>> I also booted few times my next/dt branch (with this patch) and no
>>> problems. How reproducible is the issue you experience?
>> IOMMU needs a fixup, that has been merged today:
>>
>> https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/
>>
>> I was initially convinced that this freeze is somehow related to this
>> IOMMU fixup, but it turned out that the devfreq is a source of the problems.
>>
>> The freeze happens here about 1 of 10 boots, usually with kernel
>> compiled from multi_v7_defconfig, while loading the PPMU modules. It
>> happens on your next/dt branch too.
> I was able to reproduce it easily with multi_v7. Then I commented out
> dmc bus which fixed the issue. Then I commented out acp and c2c buses
> (children/passive) which also fixed the issue. Then I uncommented
> everything and went back to next/dt - exactly the same as it was failing
> - and since then I cannot reproduce it. I triple checked, but now my
> multi_v7 on U3 on next/dt boots perfectly fine. Every time.

This issue still happens from time to time. I quick workaround to fix it 
is to add:

MODULE_SOFTDEP("pre: exynos_ppmu");

to the exynos-bus driver. Is it acceptable solution?


Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Marek Szyprowski]

On 06.02.2023 17:12, Krzysztof Kozlowski wrote:
> On 03/02/2023 23:50, Marek Szyprowski wrote:
>> On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>>>> as reported by dtc W=1:
>>>>>>>>>
>>>>>>>>>       exynos4412.dtsi:407.20-413.5:
>>>>>>>>>         Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>>>
>>>>>>>>> and dtbs_check:
>>>>>>>>>
>>>>>>>>>       exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>>>         {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>>>
>>>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>>>> in device nodes (if they are not shared).
>>>>>>>>>
>>>>>>>> Applied.
>>>>>>> I don't have a good news. It looks that this change is responsible for
>>>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>>>
>>>>>>> (before)
>>>>>>>
>>>>>>> # dmesg | grep exynos-bus
>>>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>>>> (100000 KHz ~ 267000 KHz)
>>>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>>>> (100000 KHz ~ 134000 KHz)
>>>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>>>> 50000 KHz ~ 100000 KHz)
>>>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>
>>>>>>> (after)
>>>>>>>
>>>>>>> # dmesg | grep exynos-bus
>>>>>>>
>>>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>>>> KHz ~ 400000 KHz)
>>>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>>>> KHz ~ 200000 KHz)
>>>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>>>> KHz ~ 100000 KHz)
>>>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>>>> KHz ~ 267000 KHz)
>>>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>>>> KHz ~ 400000 KHz)
>>>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>>>> KHz ~ 134000 KHz)
>>>>>>>
>>>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>>>> regression that need to be addressed somehow...
>>>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>>>> - just with different name.
>>>>> The bug is that the board fails to boot from time to time, freezing
>>>>> after registering PPMU counters...
>>>> My U3 with and without this patch, reports several warnings:
>>>> iommu_group_do_set_platform_dma()
>>>> exynos_iommu_domain_free()
>>>> clk_core_enable()
>>>>
>>>> and finally:
>>>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>>
>>>> and keeps stalling.
>>>>
>>>> At least on next-20230203. Except all these (which anyway make board
>>>> unbootable) look fine around PMU and exynos-bus.
>>> I also booted few times my next/dt branch (with this patch) and no
>>> problems. How reproducible is the issue you experience?
>> IOMMU needs a fixup, that has been merged today:
>>
>> https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/
>>
>> I was initially convinced that this freeze is somehow related to this
>> IOMMU fixup, but it turned out that the devfreq is a source of the problems.
>>
>> The freeze happens here about 1 of 10 boots, usually with kernel
>> compiled from multi_v7_defconfig, while loading the PPMU modules. It
>> happens on your next/dt branch too.
> I was able to reproduce it easily with multi_v7. Then I commented out
> dmc bus which fixed the issue. Then I commented out acp and c2c buses
> (children/passive) which also fixed the issue. Then I uncommented
> everything and went back to next/dt - exactly the same as it was failing
> - and since then I cannot reproduce it. I triple checked, but now my
> multi_v7 on U3 on next/dt boots perfectly fine. Every time.

This issue still happens from time to time. I quick workaround to fix it 
is to add:

MODULE_SOFTDEP("pre: exynos_ppmu");

to the exynos-bus driver. Is it acceptable solution?


Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 24/03/2023 18:07, Marek Szyprowski wrote:
> On 06.02.2023 17:12, Krzysztof Kozlowski wrote:
>> On 03/02/2023 23:50, Marek Szyprowski wrote:
>>> On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>>>>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>>>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>>>>> as reported by dtc W=1:
>>>>>>>>>>
>>>>>>>>>>       exynos4412.dtsi:407.20-413.5:
>>>>>>>>>>         Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>>>>
>>>>>>>>>> and dtbs_check:
>>>>>>>>>>
>>>>>>>>>>       exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>>>>         {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>>>>
>>>>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>>>>> in device nodes (if they are not shared).
>>>>>>>>>>
>>>>>>>>> Applied.
>>>>>>>> I don't have a good news. It looks that this change is responsible for
>>>>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>>>>
>>>>>>>> (before)
>>>>>>>>
>>>>>>>> # dmesg | grep exynos-bus
>>>>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>>>>> (100000 KHz ~ 267000 KHz)
>>>>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>>>>> (100000 KHz ~ 134000 KHz)
>>>>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>>>>> 50000 KHz ~ 100000 KHz)
>>>>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>>
>>>>>>>> (after)
>>>>>>>>
>>>>>>>> # dmesg | grep exynos-bus
>>>>>>>>
>>>>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>>>>> KHz ~ 400000 KHz)
>>>>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>>>>> KHz ~ 200000 KHz)
>>>>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>>>>> KHz ~ 100000 KHz)
>>>>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>>>>> KHz ~ 267000 KHz)
>>>>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>>>>> KHz ~ 400000 KHz)
>>>>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>>>>> KHz ~ 134000 KHz)
>>>>>>>>
>>>>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>>>>> regression that need to be addressed somehow...
>>>>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>>>>> - just with different name.
>>>>>> The bug is that the board fails to boot from time to time, freezing
>>>>>> after registering PPMU counters...
>>>>> My U3 with and without this patch, reports several warnings:
>>>>> iommu_group_do_set_platform_dma()
>>>>> exynos_iommu_domain_free()
>>>>> clk_core_enable()
>>>>>
>>>>> and finally:
>>>>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>>>
>>>>> and keeps stalling.
>>>>>
>>>>> At least on next-20230203. Except all these (which anyway make board
>>>>> unbootable) look fine around PMU and exynos-bus.
>>>> I also booted few times my next/dt branch (with this patch) and no
>>>> problems. How reproducible is the issue you experience?
>>> IOMMU needs a fixup, that has been merged today:
>>>
>>> https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/
>>>
>>> I was initially convinced that this freeze is somehow related to this
>>> IOMMU fixup, but it turned out that the devfreq is a source of the problems.
>>>
>>> The freeze happens here about 1 of 10 boots, usually with kernel
>>> compiled from multi_v7_defconfig, while loading the PPMU modules. It
>>> happens on your next/dt branch too.
>> I was able to reproduce it easily with multi_v7. Then I commented out
>> dmc bus which fixed the issue. Then I commented out acp and c2c buses
>> (children/passive) which also fixed the issue. Then I uncommented
>> everything and went back to next/dt - exactly the same as it was failing
>> - and since then I cannot reproduce it. I triple checked, but now my
>> multi_v7 on U3 on next/dt boots perfectly fine. Every time.
> 
> This issue still happens from time to time. I quick workaround to fix it 
> is to add:
> 
> MODULE_SOFTDEP("pre: exynos_ppmu");
> 
> to the exynos-bus driver. Is it acceptable solution?

I initially thought it might be caused by deferred probe, but it happens
even in successful boot. I guess we can go with this workaround because
I really do not have other idea.

Best regards,
Krzysztof

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Krzysztof Kozlowski]

On 24/03/2023 18:07, Marek Szyprowski wrote:
> On 06.02.2023 17:12, Krzysztof Kozlowski wrote:
>> On 03/02/2023 23:50, Marek Szyprowski wrote:
>>> On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>>>>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>>>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>>>>> as reported by dtc W=1:
>>>>>>>>>>
>>>>>>>>>>       exynos4412.dtsi:407.20-413.5:
>>>>>>>>>>         Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>>>>
>>>>>>>>>> and dtbs_check:
>>>>>>>>>>
>>>>>>>>>>       exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>>>>         {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>>>>
>>>>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>>>>> in device nodes (if they are not shared).
>>>>>>>>>>
>>>>>>>>> Applied.
>>>>>>>> I don't have a good news. It looks that this change is responsible for
>>>>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>>>>
>>>>>>>> (before)
>>>>>>>>
>>>>>>>> # dmesg | grep exynos-bus
>>>>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>>>>> (100000 KHz ~ 267000 KHz)
>>>>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>>>>> (100000 KHz ~ 400000 KHz)
>>>>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>>>>> (100000 KHz ~ 134000 KHz)
>>>>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>>>>> 50000 KHz ~ 100000 KHz)
>>>>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>>
>>>>>>>> (after)
>>>>>>>>
>>>>>>>> # dmesg | grep exynos-bus
>>>>>>>>
>>>>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>>>>> KHz ~ 400000 KHz)
>>>>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>>>>> KHz ~ 200000 KHz)
>>>>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>>>>> KHz ~ 100000 KHz)
>>>>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>>>>> (100000 KHz ~ 200000 KHz)
>>>>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>>>>> KHz ~ 267000 KHz)
>>>>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>>>>> KHz ~ 400000 KHz)
>>>>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>>>>> (160000 KHz ~ 200000 KHz)
>>>>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>>>>> KHz ~ 134000 KHz)
>>>>>>>>
>>>>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>>>>> regression that need to be addressed somehow...
>>>>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>>>>> - just with different name.
>>>>>> The bug is that the board fails to boot from time to time, freezing
>>>>>> after registering PPMU counters...
>>>>> My U3 with and without this patch, reports several warnings:
>>>>> iommu_group_do_set_platform_dma()
>>>>> exynos_iommu_domain_free()
>>>>> clk_core_enable()
>>>>>
>>>>> and finally:
>>>>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>>>>
>>>>> and keeps stalling.
>>>>>
>>>>> At least on next-20230203. Except all these (which anyway make board
>>>>> unbootable) look fine around PMU and exynos-bus.
>>>> I also booted few times my next/dt branch (with this patch) and no
>>>> problems. How reproducible is the issue you experience?
>>> IOMMU needs a fixup, that has been merged today:
>>>
>>> https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@samsung.com/
>>>
>>> I was initially convinced that this freeze is somehow related to this
>>> IOMMU fixup, but it turned out that the devfreq is a source of the problems.
>>>
>>> The freeze happens here about 1 of 10 boots, usually with kernel
>>> compiled from multi_v7_defconfig, while loading the PPMU modules. It
>>> happens on your next/dt branch too.
>> I was able to reproduce it easily with multi_v7. Then I commented out
>> dmc bus which fixed the issue. Then I commented out acp and c2c buses
>> (children/passive) which also fixed the issue. Then I uncommented
>> everything and went back to next/dt - exactly the same as it was failing
>> - and since then I cannot reproduce it. I triple checked, but now my
>> multi_v7 on U3 on next/dt boots perfectly fine. Every time.
> 
> This issue still happens from time to time. I quick workaround to fix it 
> is to add:
> 
> MODULE_SOFTDEP("pre: exynos_ppmu");
> 
> to the exynos-bus driver. Is it acceptable solution?

I initially thought it might be caused by deferred probe, but it happens
even in successful boot. I guess we can go with this workaround because
I really do not have other idea.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Markus Reichl]

Hi Marek,

Am 03.02.23 um 12:45 schrieb Marek Szyprowski:
> Hi Krzysztof,
> 
> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>> as reported by dtc W=1:
>>>
>>>    exynos4412.dtsi:407.20-413.5:
>>>      Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>
>>> and dtbs_check:
>>>
>>>    exynos4412-i9300.dtb: soc: bus-acp:
>>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>
>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>> Re-order them alphabetically while moving and put some of the OPP tables
>>> in device nodes (if they are not shared).
>>>
>> Applied.
> 
> I don't have a good news. It looks that this change is responsible for
> breaking boards that were rock-stable so far, like Odroid U3. I didn't
> manage to analyze what exactly causes the issue, but it looks that the
> exynos-bus devfreq driver somehow depends on the order of the nodes:
> 
> (before)
> 
> # dmesg | grep exynos-bus
> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
> (100000 KHz ~ 400000 KHz)
> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
> (100000 KHz ~ 267000 KHz)
> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
> (100000 KHz ~ 400000 KHz)
> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
> (100000 KHz ~ 200000 KHz)
> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
> (100000 KHz ~ 200000 KHz)
> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
> (160000 KHz ~ 200000 KHz)
> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
> (100000 KHz ~ 134000 KHz)
> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
> 50000 KHz ~ 100000 KHz)
> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
> (100000 KHz ~ 200000 KHz)
> 
> (after)
> 
> # dmesg | grep exynos-bus
> 
> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
> KHz ~ 400000 KHz)
> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
> (100000 KHz ~ 200000 KHz)
> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
> KHz ~ 200000 KHz)
> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
> KHz ~ 100000 KHz)
> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
> (100000 KHz ~ 200000 KHz)
> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
> KHz ~ 267000 KHz)
> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
> KHz ~ 400000 KHz)
> [    6.225748] exynos-bus: new bus device registered: bus-display
> (160000 KHz ~ 200000 KHz)
> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
> KHz ~ 134000 KHz)
> 
> This is definitely a driver bug, but so far it worked fine, so this is a
> regression that need to be addressed somehow...
> 
> Best regards

the exynos-bus devfreq driver is not so solid on exynos-4412-boards.
On my 24/7 odroid-x2 I need
echo performance > /sys/class/devfreq/soc:bus-leftbus/governor
to avoid random hangs.

Gruß,
-- 
Markus Reichl

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Markus Reichl]

Hi Marek,

Am 03.02.23 um 12:45 schrieb Marek Szyprowski:
> Hi Krzysztof,
> 
> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>> as reported by dtc W=1:
>>>
>>>    exynos4412.dtsi:407.20-413.5:
>>>      Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>
>>> and dtbs_check:
>>>
>>>    exynos4412-i9300.dtb: soc: bus-acp:
>>>      {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>
>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>> Re-order them alphabetically while moving and put some of the OPP tables
>>> in device nodes (if they are not shared).
>>>
>> Applied.
> 
> I don't have a good news. It looks that this change is responsible for
> breaking boards that were rock-stable so far, like Odroid U3. I didn't
> manage to analyze what exactly causes the issue, but it looks that the
> exynos-bus devfreq driver somehow depends on the order of the nodes:
> 
> (before)
> 
> # dmesg | grep exynos-bus
> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
> (100000 KHz ~ 400000 KHz)
> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
> (100000 KHz ~ 267000 KHz)
> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
> (100000 KHz ~ 400000 KHz)
> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
> (100000 KHz ~ 200000 KHz)
> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
> (100000 KHz ~ 200000 KHz)
> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
> (160000 KHz ~ 200000 KHz)
> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
> (100000 KHz ~ 134000 KHz)
> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
> 50000 KHz ~ 100000 KHz)
> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
> (100000 KHz ~ 200000 KHz)
> 
> (after)
> 
> # dmesg | grep exynos-bus
> 
> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
> KHz ~ 400000 KHz)
> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
> (100000 KHz ~ 200000 KHz)
> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
> KHz ~ 200000 KHz)
> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
> KHz ~ 100000 KHz)
> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
> (100000 KHz ~ 200000 KHz)
> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
> KHz ~ 267000 KHz)
> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
> KHz ~ 400000 KHz)
> [    6.225748] exynos-bus: new bus device registered: bus-display
> (160000 KHz ~ 200000 KHz)
> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
> KHz ~ 134000 KHz)
> 
> This is definitely a driver bug, but so far it worked fine, so this is a
> regression that need to be addressed somehow...
> 
> Best regards

the exynos-bus devfreq driver is not so solid on exynos-4412-boards.
On my 24/7 odroid-x2 I need
echo performance > /sys/class/devfreq/soc:bus-leftbus/governor
to avoid random hangs.

Gruß,
-- 
Markus Reichl

[PATCH 6/9] ARM: dts: exynos: use generic node names for phy

[Krzysztof Kozlowski]

Align HDMI and USB phy node names with bindings expectation.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos3250.dtsi | 2 +-
 arch/arm/boot/dts/exynos4.dtsi    | 4 ++--
 arch/arm/boot/dts/exynos5250.dtsi | 2 +-
 arch/arm/boot/dts/exynos5420.dtsi | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2e81371e04c2..b91a66cda0a5 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -588,7 +588,7 @@ mshc_2: mmc@12530000 {
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
 			reg = <0x125B0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index d1adaee2af58..a421f11b3a57 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -352,7 +352,7 @@ sdhci_3: mmc@12540000 {
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos4210-usb2-phy";
 			reg = <0x125B0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
@@ -604,7 +604,7 @@ i2c_8: i2c@138e0000 {
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmi_i2c_phy: hdmiphy@38 {
+			hdmi_i2c_phy: hdmi-phy@38 {
 				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 9225f3552837..5b5aa79988e9 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -470,7 +470,7 @@ i2c_8: i2c@12ce0000 {
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmiphy: hdmiphy@38 {
+			hdmiphy: hdmi-phy@38 {
 				compatible = "samsung,exynos4212-hdmiphy";
 				reg = <0x38>;
 			};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index cea92f175d46..96f92faa70e0 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -776,7 +776,7 @@ hdmi: hdmi@14530000 {
 			#sound-dai-cells = <0>;
 		};
 
-		hdmiphy: hdmiphy@145d0000 {
+		hdmiphy: hdmi-phy@145d0000 {
 			reg = <0x145D0000 0x20>;
 		};
 
-- 
2.34.1

[PATCH 6/9] ARM: dts: exynos: use generic node names for phy

[Krzysztof Kozlowski]

Align HDMI and USB phy node names with bindings expectation.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos3250.dtsi | 2 +-
 arch/arm/boot/dts/exynos4.dtsi    | 4 ++--
 arch/arm/boot/dts/exynos5250.dtsi | 2 +-
 arch/arm/boot/dts/exynos5420.dtsi | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2e81371e04c2..b91a66cda0a5 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -588,7 +588,7 @@ mshc_2: mmc@12530000 {
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
 			reg = <0x125B0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index d1adaee2af58..a421f11b3a57 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -352,7 +352,7 @@ sdhci_3: mmc@12540000 {
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos4210-usb2-phy";
 			reg = <0x125B0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
@@ -604,7 +604,7 @@ i2c_8: i2c@138e0000 {
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmi_i2c_phy: hdmiphy@38 {
+			hdmi_i2c_phy: hdmi-phy@38 {
 				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 9225f3552837..5b5aa79988e9 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -470,7 +470,7 @@ i2c_8: i2c@12ce0000 {
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmiphy: hdmiphy@38 {
+			hdmiphy: hdmi-phy@38 {
 				compatible = "samsung,exynos4212-hdmiphy";
 				reg = <0x38>;
 			};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index cea92f175d46..96f92faa70e0 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -776,7 +776,7 @@ hdmi: hdmi@14530000 {
 			#sound-dai-cells = <0>;
 		};
 
-		hdmiphy: hdmiphy@145d0000 {
+		hdmiphy: hdmi-phy@145d0000 {
 			reg = <0x145D0000 0x20>;
 		};
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH 6/9] ARM: dts: exynos: use generic node names for phy

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:10 +0100, Krzysztof Kozlowski wrote:
> Align HDMI and USB phy node names with bindings expectation.
> 
> 

Applied, thanks!

[6/9] ARM: dts: exynos: use generic node names for phy
      https://git.kernel.org/krzk/linux/c/7bac2cd7fff73dc2b3600c83aeb1c57100cafe70

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH 6/9] ARM: dts: exynos: use generic node names for phy

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:10 +0100, Krzysztof Kozlowski wrote:
> Align HDMI and USB phy node names with bindings expectation.
> 
> 

Applied, thanks!

[6/9] ARM: dts: exynos: use generic node names for phy
      https://git.kernel.org/krzk/linux/c/7bac2cd7fff73dc2b3600c83aeb1c57100cafe70

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/9] ARM: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

By convention the hex addresses should be lowercase.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos-syscon-restart.dtsi  |  2 +-
 arch/arm/boot/dts/exynos3250-monk.dts         |  2 +-
 arch/arm/boot/dts/exynos3250-rinato.dts       |  2 +-
 arch/arm/boot/dts/exynos3250.dtsi             | 30 ++++----
 arch/arm/boot/dts/exynos4.dtsi                | 58 +++++++--------
 arch/arm/boot/dts/exynos4210.dtsi             |  4 +-
 .../boot/dts/exynos4412-itop-scp-core.dtsi    |  2 +-
 arch/arm/boot/dts/exynos4412-midas.dtsi       |  2 +-
 .../boot/dts/exynos4412-odroid-common.dtsi    |  2 +-
 arch/arm/boot/dts/exynos4412-odroidu3.dts     |  2 +-
 arch/arm/boot/dts/exynos4412-odroidx.dts      |  2 +-
 arch/arm/boot/dts/exynos4412-odroidx2.dts     |  2 +-
 arch/arm/boot/dts/exynos4412-origen.dts       |  2 +-
 arch/arm/boot/dts/exynos4412-p4note.dtsi      |  4 +-
 arch/arm/boot/dts/exynos4412.dtsi             | 28 ++++----
 arch/arm/boot/dts/exynos5.dtsi                | 22 +++---
 arch/arm/boot/dts/exynos5250.dtsi             | 70 +++++++++----------
 arch/arm/boot/dts/exynos5260.dtsi             | 36 +++++-----
 arch/arm/boot/dts/exynos5410.dtsi             |  2 +-
 arch/arm/boot/dts/exynos5420.dtsi             | 66 ++++++++---------
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi |  2 +-
 21 files changed, 171 insertions(+), 171 deletions(-)

diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
index ecf416690a15..bc9a78f6d4b7 100644
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -7,7 +7,7 @@ &pmu_system_controller {
 	poweroff: syscon-poweroff {
 		compatible = "syscon-poweroff";
 		regmap = <&pmu_system_controller>;
-		offset = <0x330C>; /* PS_HOLD_CONTROL */
+		offset = <0x330c>; /* PS_HOLD_CONTROL */
 		mask = <0x5200>; /* reset value */
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index c8eacf1b5d0b..80d90fe7fad1 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -31,7 +31,7 @@ memory@40000000 {
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 812816af8476..1f9cba0607e1 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -36,7 +36,7 @@ memory@40000000 {
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index b91a66cda0a5..28bb2ce8ccf7 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -364,35 +364,35 @@ mipi_phy: video-phy {
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "ISP";
 		};
@@ -409,7 +409,7 @@ cmu: clock-controller@10030000 {
 
 		cmu_dmc: clock-controller@105c0000 {
 			compatible = "samsung,exynos3250-cmu-dmc";
-			reg = <0x105C0000 0x2000>;
+			reg = <0x105c0000 0x2000>;
 			#clock-cells = <1>;
 		};
 
@@ -424,7 +424,7 @@ rtc: rtc@10070000 {
 
 		tmu: tmu@100c0000 {
 			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
@@ -518,7 +518,7 @@ fimd: fimd@11c00000 {
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
@@ -590,7 +590,7 @@ mshc_2: mmc@12530000 {
 
 		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
 			clock-names = "phy", "ref";
@@ -618,7 +618,7 @@ pdma1: dma-controller@12690000 {
 
 		adc: adc@126c0000 {
 			compatible = "samsung,exynos3250-adc";
-			reg = <0x126C0000 0x100>;
+			reg = <0x126c0000 0x100>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
@@ -769,7 +769,7 @@ i2c_4: i2c@138a0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
@@ -782,7 +782,7 @@ i2c_5: i2c@138b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
@@ -795,7 +795,7 @@ i2c_6: i2c@138c0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
@@ -808,7 +808,7 @@ i2c_7: i2c@138d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
@@ -864,7 +864,7 @@ i2s2: i2s@13970000 {
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index a421f11b3a57..44dcb1377475 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -65,7 +65,7 @@ soc: soc {
 
 		clock_audss: clock-controller@3810000 {
 			compatible = "samsung,exynos4210-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>,
@@ -113,28 +113,28 @@ mipi_phy: video-phy {
 
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_tv: power-domain@10023c20 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C20 0x20>;
+			reg = <0x10023c20 0x20>;
 			#power-domain-cells = <0>;
 			power-domains = <&pd_lcd0>;
 			label = "TV";
@@ -142,21 +142,21 @@ pd_tv: power-domain@10023c20 {
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_gps: power-domain@10023ce0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CE0 0x20>;
+			reg = <0x10023ce0 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS";
 		};
 
 		pd_gps_alive: power-domain@10023d00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023D00 0x20>;
+			reg = <0x10023d00 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS alive";
 		};
@@ -190,7 +190,7 @@ pmu_system_controller: system-controller@10020000 {
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -309,7 +309,7 @@ rtc: rtc@10070000 {
 
 		keypad: keypad@100a0000 {
 			compatible = "samsung,s5pv210-keypad";
-			reg = <0x100A0000 0x100>;
+			reg = <0x100a0000 0x100>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_KEYIF>;
 			clock-names = "keypad";
@@ -354,7 +354,7 @@ sdhci_3: mmc@12540000 {
 
 		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos4210-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
 			clock-names = "phy", "ref";
@@ -546,7 +546,7 @@ i2c_4: i2c@138a0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C4>;
 			clock-names = "i2c";
@@ -559,7 +559,7 @@ i2c_5: i2c@138b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C5>;
 			clock-names = "i2c";
@@ -572,7 +572,7 @@ i2c_6: i2c@138c0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C6>;
 			clock-names = "i2c";
@@ -585,7 +585,7 @@ i2c_7: i2c@138d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C7>;
 			clock-names = "i2c";
@@ -598,7 +598,7 @@ i2c_8: i2c@138e0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x138E0000 0x100>;
+			reg = <0x138e0000 0x100>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C_HDMI>;
 			clock-names = "i2c";
@@ -657,7 +657,7 @@ spi_2: spi@13940000 {
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
@@ -712,7 +712,7 @@ fimd: fimd@11c00000 {
 
 		tmu: tmu@100c0000 {
 			interrupt-parent = <&combiner>;
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <2 4>;
 			status = "disabled";
 			#thermal-sensor-cells = <0>;
@@ -739,7 +739,7 @@ rotator: rotator@12810000 {
 
 		hdmi: hdmi@12d00000 {
 			compatible = "samsung,exynos4210-hdmi";
-			reg = <0x12D00000 0x70000>;
+			reg = <0x12d00000 0x70000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 				      "sclk_hdmiphy", "mout_hdmi";
@@ -756,7 +756,7 @@ hdmi: hdmi@12d00000 {
 
 		hdmicec: cec@100b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x100B0000 0x200>;
+			reg = <0x100b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -770,7 +770,7 @@ hdmicec: cec@100b0000 {
 		mixer: mixer@12c10000 {
 			compatible = "samsung,exynos4210-mixer";
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+			reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
 			power-domains = <&pd_tv>;
 			iommus = <&sysmmu_tv>;
 			status = "disabled";
@@ -902,7 +902,7 @@ sysmmu_mfc_r: sysmmu@13630000 {
 
 		sysmmu_tv: sysmmu@12e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu", "master";
@@ -913,7 +913,7 @@ sysmmu_tv: sysmmu@12e20000 {
 
 		sysmmu_fimc0: sysmmu@11a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A20000 0x1000>;
+			reg = <0x11a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -924,7 +924,7 @@ sysmmu_fimc0: sysmmu@11a20000 {
 
 		sysmmu_fimc1: sysmmu@11a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A30000 0x1000>;
+			reg = <0x11a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 3>;
 			clock-names = "sysmmu", "master";
@@ -935,7 +935,7 @@ sysmmu_fimc1: sysmmu@11a30000 {
 
 		sysmmu_fimc2: sysmmu@11a40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A40000 0x1000>;
+			reg = <0x11a40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 4>;
 			clock-names = "sysmmu", "master";
@@ -946,7 +946,7 @@ sysmmu_fimc2: sysmmu@11a40000 {
 
 		sysmmu_fimc3: sysmmu@11a50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A50000 0x1000>;
+			reg = <0x11a50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 5>;
 			clock-names = "sysmmu", "master";
@@ -957,7 +957,7 @@ sysmmu_fimc3: sysmmu@11a50000 {
 
 		sysmmu_jpeg: sysmmu@11a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A60000 0x1000>;
+			reg = <0x11a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 6>;
 			clock-names = "sysmmu", "master";
@@ -968,7 +968,7 @@ sysmmu_jpeg: sysmmu@11a60000 {
 
 		sysmmu_rotator: sysmmu@12a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A30000 0x1000>;
+			reg = <0x12a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu", "master";
@@ -979,7 +979,7 @@ sysmmu_rotator: sysmmu@12a30000 {
 
 		sysmmu_fimd0: sysmmu@11e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11E20000 0x1000>;
+			reg = <0x11e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 2>;
 			clock-names = "sysmmu", "master";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 1b4e55822e7c..5a1ec714c612 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -264,7 +264,7 @@ smp-sram@1f000 {
 
 		pd_lcd1: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD1";
 		};
@@ -356,7 +356,7 @@ ppmu_lcd1: ppmu@12240000 {
 
 		sysmmu_g2d: sysmmu@12a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A20000 0x1000>;
+			reg = <0x12a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 7>;
 			clock-names = "sysmmu", "master";
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index a67cb61e3cbb..e42e39dc0e40 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -25,7 +25,7 @@ memory@40000000 {
 
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index a626d33d1330..d5074fa57142 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -33,7 +33,7 @@ chosen {
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index e7669b9e9edb..7c2780d3e37c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -19,7 +19,7 @@ chosen {
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	gpio_keys: gpio-keys {
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index a5ad88b897ff..42812da1f882 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -23,7 +23,7 @@ aliases {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 
 	vbus_otg_reg: regulator-1 {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 68d589e081bc..d5316cf2fbb6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -22,7 +22,7 @@ aliases {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x3FF00000>;
+		reg = <0x40000000 0x3ff00000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index f4b68c75c962..7be4cbdc4413 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -17,6 +17,6 @@ / {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index a3905e27b9cd..ea9fd284386d 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -31,7 +31,7 @@ chosen {
 
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	mmc_reg: regulator-0 {
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 201c38edd48f..3e05a49f29ff 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -32,7 +32,7 @@ chosen {
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -198,7 +198,7 @@ adc@41 {
 			stmpe_adc {
 				compatible = "st,stmpe-adc";
 				#io-channel-cells = <1>;
-				st,norequest-mask = <0x2F>;
+				st,norequest-mask = <0x2f>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index f34c7400475b..11f9dd94b6b3 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -183,7 +183,7 @@ core3 {
 		cpu0: cpu@a00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
+			reg = <0xa00>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -193,7 +193,7 @@ cpu0: cpu@a00 {
 		cpu1: cpu@a01 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
+			reg = <0xa01>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -203,7 +203,7 @@ cpu1: cpu@a01 {
 		cpu2: cpu@a02 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
+			reg = <0xa02>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -213,7 +213,7 @@ cpu2: cpu@a02 {
 		cpu3: cpu@a03 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
+			reg = <0xa03>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -376,7 +376,7 @@ pinctrl_2: pinctrl@3860000 {
 
 		pinctrl_3: pinctrl@106e0000 {
 			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106E0000 0x1000>;
+			reg = <0x106e0000 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -400,7 +400,7 @@ smp-sram@2f000 {
 
 		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "ISP";
 		};
@@ -460,7 +460,7 @@ watchdog: watchdog@10060000 {
 
 		adc: adc@126c0000 {
 			compatible = "samsung,exynos4212-adc";
-			reg = <0x126C0000 0x100>;
+			reg = <0x126c0000 0x100>;
 			interrupt-parent = <&combiner>;
 			interrupts = <10 3>;
 			clocks = <&clock CLK_TSADC>;
@@ -493,7 +493,7 @@ mshc_0: mmc@12550000 {
 
 		sysmmu_g2d: sysmmu@10a40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A40000 0x1000>;
+			reg = <0x10a40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 7>;
 			clock-names = "sysmmu", "master";
@@ -525,7 +525,7 @@ sysmmu_fimc_drc: sysmmu@12270000 {
 
 		sysmmu_fimc_fd: sysmmu@122a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122A0000 0x1000>;
+			reg = <0x122a0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 4>;
 			power-domains = <&pd_isp>;
@@ -536,7 +536,7 @@ sysmmu_fimc_fd: sysmmu@122a0000 {
 
 		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122B0000 0x1000>;
+			reg = <0x122b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 5>;
 			power-domains = <&pd_isp>;
@@ -547,7 +547,7 @@ sysmmu_fimc_mcuctl: sysmmu@122b0000 {
 
 		sysmmu_fimc_lite0: sysmmu@123b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123B0000 0x1000>;
+			reg = <0x123b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 0>;
 			power-domains = <&pd_isp>;
@@ -559,7 +559,7 @@ sysmmu_fimc_lite0: sysmmu@123b0000 {
 
 		sysmmu_fimc_lite1: sysmmu@123c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123C0000 0x1000>;
+			reg = <0x123c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 1>;
 			power-domains = <&pd_isp>;
@@ -614,7 +614,7 @@ fimc_lite_0: fimc-lite@12390000 {
 
 	fimc_lite_1: fimc-lite@123a0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123A0000 0x1000>;
+		reg = <0x123a0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -811,7 +811,7 @@ &tmu {
 	compatible = "samsung,exynos4412-tmu";
 	interrupt-parent = <&combiner>;
 	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
+	reg = <0x100c0000 0x100>;
 	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
 	status = "disabled";
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index c8da0d4b1b33..48e43b6b3213 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -104,31 +104,31 @@ sysreg_system_controller: syscon@10050000 {
 
 		serial_0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_3: serial@12c30000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C30000 0x100>;
+			reg = <0x12c30000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		i2c_0: i2c@12c60000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C60000 0x100>;
+			reg = <0x12c60000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -138,7 +138,7 @@ i2c_0: i2c@12c60000 {
 
 		i2c_1: i2c@12c70000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C70000 0x100>;
+			reg = <0x12c70000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -148,7 +148,7 @@ i2c_1: i2c@12c70000 {
 
 		i2c_2: i2c@12c80000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C80000 0x100>;
+			reg = <0x12c80000 0x100>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,7 +158,7 @@ i2c_2: i2c@12c80000 {
 
 		i2c_3: i2c@12c90000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C90000 0x100>;
+			reg = <0x12c90000 0x100>;
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -168,7 +168,7 @@ i2c_3: i2c@12c90000 {
 
 		pwm: pwm@12dd0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x12DD0000 0x100>;
+			reg = <0x12dd0000 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
@@ -180,7 +180,7 @@ pwm: pwm@12dd0000 {
 
 		rtc: rtc@101e0000 {
 			compatible = "samsung,s3c6410-rtc";
-			reg = <0x101E0000 0x100>;
+			reg = <0x101e0000 0x100>;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -198,7 +198,7 @@ fimd: fimd@14400000 {
 
 		dp: dp-controller@145b0000 {
 			compatible = "samsung,exynos5-dp";
-			reg = <0x145B0000 0x1000>;
+			reg = <0x145b0000 0x1000>;
 			interrupts = <10 3>;
 			interrupt-parent = <&combiner>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 5b5aa79988e9..97e89859ba3d 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -216,14 +216,14 @@ pd_g3d: power-domain@10044060 {
 
 		pd_disp1: power-domain@100440a0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440A0 0x20>;
+			reg = <0x100440a0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP1";
 		};
 
 		pd_mau: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -236,7 +236,7 @@ clock: clock-controller@10010000 {
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5250-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
@@ -247,7 +247,7 @@ clock_audss: audss-clock-controller@3810000 {
 		timer@101c0000 {
 			compatible = "samsung,exynos5250-mct",
 				     "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
+			reg = <0x101c0000 0x800>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts-extended = <&combiner 23 3>,
@@ -302,7 +302,7 @@ pmu_system_controller: system-controller@10040000 {
 
 		watchdog@101d0000 {
 			compatible = "samsung,exynos5250-wdt";
-			reg = <0x101D0000 0x100>;
+			reg = <0x101d0000 0x100>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_WDT>;
 			clock-names = "watchdog";
@@ -322,7 +322,7 @@ mfc: codec@11000000 {
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -387,7 +387,7 @@ tmu: tmu@10060000 {
 
 		sata: sata@122f0000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0x122F0000 0x1ff>;
+			reg = <0x122f0000 0x1ff>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
 			clock-names = "sata", "pclk";
@@ -410,7 +410,7 @@ sata_phy: sata-phy@12170000 {
 		/* i2c_0-3 are defined in exynos5.dtsi */
 		i2c_4: i2c@12ca0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CA0000 0x100>;
+			reg = <0x12ca0000 0x100>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -423,7 +423,7 @@ i2c_4: i2c@12ca0000 {
 
 		i2c_5: i2c@12cb0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CB0000 0x100>;
+			reg = <0x12cb0000 0x100>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -436,7 +436,7 @@ i2c_5: i2c@12cb0000 {
 
 		i2c_6: i2c@12cc0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CC0000 0x100>;
+			reg = <0x12cc0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -449,7 +449,7 @@ i2c_6: i2c@12cc0000 {
 
 		i2c_7: i2c@12cd0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CD0000 0x100>;
+			reg = <0x12cd0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -462,7 +462,7 @@ i2c_7: i2c@12cd0000 {
 
 		i2c_8: i2c@12ce0000 {
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x12CE0000 0x1000>;
+			reg = <0x12ce0000 0x1000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -478,7 +478,7 @@ hdmiphy: hdmi-phy@38 {
 
 		i2c_9: i2c@121d0000 {
 			compatible = "samsung,exynos5-sata-phy-i2c";
-			reg = <0x121D0000 0x100>;
+			reg = <0x121d0000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_SATA_PHYI2C>;
@@ -608,7 +608,7 @@ i2s0: i2s@3830000 {
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -623,7 +623,7 @@ i2s1: i2s@12d60000 {
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -695,7 +695,7 @@ usb2_phy_gen: phy@12130000 {
 
 		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -704,7 +704,7 @@ pdma0: dma-controller@121a0000 {
 
 		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -722,7 +722,7 @@ mdma0: dma-controller@10800000 {
 
 		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
@@ -787,7 +787,7 @@ hdmi: hdmi@14530000 {
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -838,7 +838,7 @@ dsi_0: dsi@14500000 {
 
 		adc: adc@12d10000 {
 			compatible = "samsung,exynos-adc-v1";
-			reg = <0x12D10000 0x100>;
+			reg = <0x12d10000 0x100>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ADC>;
 			clock-names = "adc";
@@ -849,7 +849,7 @@ adc: adc@12d10000 {
 
 		sysmmu_g2d: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -881,7 +881,7 @@ sysmmu_mfc_l: sysmmu@11210000 {
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -891,7 +891,7 @@ sysmmu_rotator: sysmmu@11d40000 {
 
 		sysmmu_jpeg: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			power-domains = <&pd_gsc>;
@@ -922,7 +922,7 @@ sysmmu_fimc_drc: sysmmu@13270000 {
 
 		sysmmu_fimc_fd: sysmmu@132a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132A0000 0x1000>;
+			reg = <0x132a0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu";
@@ -952,7 +952,7 @@ sysmmu_fimc_scp: sysmmu@13290000 {
 
 		sysmmu_fimc_mcuctl: sysmmu@132b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132B0000 0x1000>;
+			reg = <0x132b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu";
@@ -962,7 +962,7 @@ sysmmu_fimc_mcuctl: sysmmu@132b0000 {
 
 		sysmmu_fimc_odc: sysmmu@132c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132C0000 0x1000>;
+			reg = <0x132c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <11 0>;
 			clock-names = "sysmmu";
@@ -972,7 +972,7 @@ sysmmu_fimc_odc: sysmmu@132c0000 {
 
 		sysmmu_fimc_dis0: sysmmu@132d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132D0000 0x1000>;
+			reg = <0x132d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <10 4>;
 			clock-names = "sysmmu";
@@ -982,7 +982,7 @@ sysmmu_fimc_dis0: sysmmu@132d0000 {
 
 		sysmmu_fimc_dis1: sysmmu@132e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132E0000 0x1000>;
+			reg = <0x132e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <9 4>;
 			clock-names = "sysmmu";
@@ -992,7 +992,7 @@ sysmmu_fimc_dis1: sysmmu@132e0000 {
 
 		sysmmu_fimc_3dnr: sysmmu@132f0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132F0000 0x1000>;
+			reg = <0x132f0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 6>;
 			clock-names = "sysmmu";
@@ -1002,7 +1002,7 @@ sysmmu_fimc_3dnr: sysmmu@132f0000 {
 
 		sysmmu_fimc_lite0: sysmmu@13c40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C40000 0x1000>;
+			reg = <0x13c40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <3 4>;
 			power-domains = <&pd_gsc>;
@@ -1013,7 +1013,7 @@ sysmmu_fimc_lite0: sysmmu@13c40000 {
 
 		sysmmu_fimc_lite1: sysmmu@13c50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C50000 0x1000>;
+			reg = <0x13c50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 1>;
 			power-domains = <&pd_gsc>;
@@ -1024,7 +1024,7 @@ sysmmu_fimc_lite1: sysmmu@13c50000 {
 
 		sysmmu_gsc0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			power-domains = <&pd_gsc>;
@@ -1035,7 +1035,7 @@ sysmmu_gsc0: sysmmu@13e80000 {
 
 		sysmmu_gsc1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			power-domains = <&pd_gsc>;
@@ -1046,7 +1046,7 @@ sysmmu_gsc1: sysmmu@13e90000 {
 
 		sysmmu_gsc2: sysmmu@13ea0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EA0000 0x1000>;
+			reg = <0x13ea0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 4>;
 			power-domains = <&pd_gsc>;
@@ -1057,7 +1057,7 @@ sysmmu_gsc2: sysmmu@13ea0000 {
 
 		sysmmu_gsc3: sysmmu@13eb0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EB0000 0x1000>;
+			reg = <0x13eb0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 6>;
 			power-domains = <&pd_gsc>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index ff1ee409eff3..a97449b4640c 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -177,7 +177,7 @@ clock_kfc: clock-controller@10700000 {
 
 		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
+			reg = <0x10a00000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
@@ -187,7 +187,7 @@ clock_g2d: clock-controller@10a00000 {
 
 		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
+			reg = <0x10ce0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>;
 			clock-names = "fin_pll";
@@ -213,7 +213,7 @@ clock_g3d: clock-controller@11830000 {
 
 		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
+			reg = <0x122e0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&fin_pll>,
@@ -233,7 +233,7 @@ clock_fsys: clock-controller@122e0000 {
 
 		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
+			reg = <0x128c0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_FOUT_AUD_PLL>,
@@ -247,7 +247,7 @@ clock_aud: clock-controller@128c0000 {
 
 		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
+			reg = <0x133c0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
@@ -261,7 +261,7 @@ clock_isp: clock-controller@133c0000 {
 
 		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
+			reg = <0x13f00000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
@@ -335,7 +335,7 @@ chipid: chipid@10000000 {
 		mct: timer@100b0000 {
 			compatible = "samsung,exynos5260-mct",
 				     "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
+			reg = <0x100b0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -356,8 +356,8 @@ cci: cci@10f00000 {
 			compatible = "arm,cci-400";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
+			reg = <0x10f00000 0x1000>;
+			ranges = <0x0 0x10f00000 0x6000>;
 
 			cci_control0: slave-if@4000 {
 				compatible = "arm,cci-400-ctrl-if";
@@ -392,18 +392,18 @@ pinctrl_1: pinctrl@12290000 {
 
 		pinctrl_2: pinctrl@128b0000 {
 			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
+			reg = <0x128b0000 0x1000>;
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10d50000 {
 			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
+			reg = <0x10d50000 0x10000>;
 		};
 
 		uart0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -412,7 +412,7 @@ uart0: serial@12c00000 {
 
 		uart1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -421,7 +421,7 @@ uart1: serial@12c10000 {
 
 		uart2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -499,7 +499,7 @@ mmc_2: mmc@12160000 {
 
 		hsi2c_0: i2c@12da0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DA0000 0x1000>;
+			reg = <0x12da0000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -512,7 +512,7 @@ hsi2c_0: i2c@12da0000 {
 
 		hsi2c_1: i2c@12db0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DB0000 0x1000>;
+			reg = <0x12db0000 0x1000>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -525,7 +525,7 @@ hsi2c_1: i2c@12db0000 {
 
 		hsi2c_2: i2c@12dc0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DC0000 0x1000>;
+			reg = <0x12dc0000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -538,7 +538,7 @@ hsi2c_2: i2c@12dc0000 {
 
 		hsi2c_3: i2c@12dd0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DD0000 0x1000>;
+			reg = <0x12dd0000 0x1000>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 8a6b890fb8f7..350b8afa0a3a 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -81,7 +81,7 @@ clock: clock-controller@10010000 {
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5410-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
 			clock-names = "pll_ref", "pll_in";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 96f92faa70e0..13d7be236a23 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -293,7 +293,7 @@ clock: clock-controller@10010000 {
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5420-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
 				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
@@ -373,37 +373,37 @@ dmc: memory-controller@10c20000 {
 
 		nocp_mem0_0: nocp@10ca1000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1000 0x200>;
+			reg = <0x10ca1000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem0_1: nocp@10ca1400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1400 0x200>;
+			reg = <0x10ca1400 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_0: nocp@10ca1800 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1800 0x200>;
+			reg = <0x10ca1800 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_1: nocp@10ca1c00 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1C00 0x200>;
+			reg = <0x10ca1c00 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_0: nocp@11a51000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51000 0x200>;
+			reg = <0x11a51000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_1: nocp@11a51400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51400 0x200>;
+			reg = <0x11a51400 0x200>;
 			status = "disabled";
 		};
 
@@ -485,14 +485,14 @@ g3d_pd: power-domain@10044080 {
 
 		disp_pd: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP";
 		};
 
 		mau_pd: power-domain@100440e0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440E0 0x20>;
+			reg = <0x100440e0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -553,7 +553,7 @@ adma: dma-controller@3880000 {
 
 		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -562,7 +562,7 @@ pdma0: dma-controller@121a0000 {
 
 		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -580,7 +580,7 @@ mdma0: dma-controller@10800000 {
 
 		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
@@ -618,7 +618,7 @@ i2s0: i2s@3830000 {
 
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -634,7 +634,7 @@ i2s1: i2s@12d60000 {
 
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -723,7 +723,7 @@ dsi: dsi@14500000 {
 
 		hsi2c_8: i2c@12e00000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E00000 0x1000>;
+			reg = <0x12e00000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -736,7 +736,7 @@ hsi2c_8: i2c@12e00000 {
 
 		hsi2c_9: i2c@12e10000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E10000 0x1000>;
+			reg = <0x12e10000 0x1000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -749,7 +749,7 @@ hsi2c_9: i2c@12e10000 {
 
 		hsi2c_10: i2c@12e20000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -777,12 +777,12 @@ hdmi: hdmi@14530000 {
 		};
 
 		hdmiphy: hdmi-phy@145d0000 {
-			reg = <0x145D0000 0x20>;
+			reg = <0x145d0000 0x20>;
 		};
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -807,7 +807,7 @@ mixer: mixer@14450000 {
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -916,7 +916,7 @@ scaler_2: scaler@12820000 {
 
 		jpeg_0: jpeg@11f50000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F50000 0x1000>;
+			reg = <0x11f50000 0x1000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG>;
@@ -925,7 +925,7 @@ jpeg_0: jpeg@11f50000 {
 
 		jpeg_1: jpeg@11f60000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F60000 0x1000>;
+			reg = <0x11f60000 0x1000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG2>;
@@ -990,7 +990,7 @@ tmu_gpu: tmu@100a0000 {
 
 		sysmmu_g2dr: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -1000,7 +1000,7 @@ sysmmu_g2dr: sysmmu@10a60000 {
 
 		sysmmu_g2dw: sysmmu@10a70000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A70000 0x1000>;
+			reg = <0x10a70000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 2>;
 			clock-names = "sysmmu", "master";
@@ -1021,7 +1021,7 @@ sysmmu_tv: sysmmu@14650000 {
 
 		sysmmu_gscl0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			clock-names = "sysmmu", "master";
@@ -1032,7 +1032,7 @@ sysmmu_gscl0: sysmmu@13e80000 {
 
 		sysmmu_gscl1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			clock-names = "sysmmu", "master";
@@ -1064,7 +1064,7 @@ sysmmu_scaler1r: sysmmu@12890000 {
 
 		sysmmu_scaler2r: sysmmu@128a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128A0000 0x1000>;
+			reg = <0x128a0000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
@@ -1074,7 +1074,7 @@ sysmmu_scaler2r: sysmmu@128a0000 {
 
 		sysmmu_scaler0w: sysmmu@128c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128C0000 0x1000>;
+			reg = <0x128c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <27 2>;
 			clock-names = "sysmmu", "master";
@@ -1085,7 +1085,7 @@ sysmmu_scaler0w: sysmmu@128c0000 {
 
 		sysmmu_scaler1w: sysmmu@128d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128D0000 0x1000>;
+			reg = <0x128d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 6>;
 			clock-names = "sysmmu", "master";
@@ -1096,7 +1096,7 @@ sysmmu_scaler1w: sysmmu@128d0000 {
 
 		sysmmu_scaler2w: sysmmu@128e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128E0000 0x1000>;
+			reg = <0x128e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <19 6>;
 			clock-names = "sysmmu", "master";
@@ -1107,7 +1107,7 @@ sysmmu_scaler2w: sysmmu@128e0000 {
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -1117,7 +1117,7 @@ sysmmu_rotator: sysmmu@11d40000 {
 
 		sysmmu_jpeg0: sysmmu@11f10000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F10000 0x1000>;
+			reg = <0x11f10000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -1127,7 +1127,7 @@ sysmmu_jpeg0: sysmmu@11f10000 {
 
 		sysmmu_jpeg1: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 06103dd37265..30fc677d8bac 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -16,7 +16,7 @@
 / {
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7EA00000>;
+		reg = <0x40000000 0x7ea00000>;
 	};
 
 	chosen {
-- 
2.34.1

[PATCH 7/9] ARM: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

By convention the hex addresses should be lowercase.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos-syscon-restart.dtsi  |  2 +-
 arch/arm/boot/dts/exynos3250-monk.dts         |  2 +-
 arch/arm/boot/dts/exynos3250-rinato.dts       |  2 +-
 arch/arm/boot/dts/exynos3250.dtsi             | 30 ++++----
 arch/arm/boot/dts/exynos4.dtsi                | 58 +++++++--------
 arch/arm/boot/dts/exynos4210.dtsi             |  4 +-
 .../boot/dts/exynos4412-itop-scp-core.dtsi    |  2 +-
 arch/arm/boot/dts/exynos4412-midas.dtsi       |  2 +-
 .../boot/dts/exynos4412-odroid-common.dtsi    |  2 +-
 arch/arm/boot/dts/exynos4412-odroidu3.dts     |  2 +-
 arch/arm/boot/dts/exynos4412-odroidx.dts      |  2 +-
 arch/arm/boot/dts/exynos4412-odroidx2.dts     |  2 +-
 arch/arm/boot/dts/exynos4412-origen.dts       |  2 +-
 arch/arm/boot/dts/exynos4412-p4note.dtsi      |  4 +-
 arch/arm/boot/dts/exynos4412.dtsi             | 28 ++++----
 arch/arm/boot/dts/exynos5.dtsi                | 22 +++---
 arch/arm/boot/dts/exynos5250.dtsi             | 70 +++++++++----------
 arch/arm/boot/dts/exynos5260.dtsi             | 36 +++++-----
 arch/arm/boot/dts/exynos5410.dtsi             |  2 +-
 arch/arm/boot/dts/exynos5420.dtsi             | 66 ++++++++---------
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi |  2 +-
 21 files changed, 171 insertions(+), 171 deletions(-)

diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
index ecf416690a15..bc9a78f6d4b7 100644
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -7,7 +7,7 @@ &pmu_system_controller {
 	poweroff: syscon-poweroff {
 		compatible = "syscon-poweroff";
 		regmap = <&pmu_system_controller>;
-		offset = <0x330C>; /* PS_HOLD_CONTROL */
+		offset = <0x330c>; /* PS_HOLD_CONTROL */
 		mask = <0x5200>; /* reset value */
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index c8eacf1b5d0b..80d90fe7fad1 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -31,7 +31,7 @@ memory@40000000 {
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 812816af8476..1f9cba0607e1 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -36,7 +36,7 @@ memory@40000000 {
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index b91a66cda0a5..28bb2ce8ccf7 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -364,35 +364,35 @@ mipi_phy: video-phy {
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "ISP";
 		};
@@ -409,7 +409,7 @@ cmu: clock-controller@10030000 {
 
 		cmu_dmc: clock-controller@105c0000 {
 			compatible = "samsung,exynos3250-cmu-dmc";
-			reg = <0x105C0000 0x2000>;
+			reg = <0x105c0000 0x2000>;
 			#clock-cells = <1>;
 		};
 
@@ -424,7 +424,7 @@ rtc: rtc@10070000 {
 
 		tmu: tmu@100c0000 {
 			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
@@ -518,7 +518,7 @@ fimd: fimd@11c00000 {
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
@@ -590,7 +590,7 @@ mshc_2: mmc@12530000 {
 
 		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
 			clock-names = "phy", "ref";
@@ -618,7 +618,7 @@ pdma1: dma-controller@12690000 {
 
 		adc: adc@126c0000 {
 			compatible = "samsung,exynos3250-adc";
-			reg = <0x126C0000 0x100>;
+			reg = <0x126c0000 0x100>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
@@ -769,7 +769,7 @@ i2c_4: i2c@138a0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
@@ -782,7 +782,7 @@ i2c_5: i2c@138b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
@@ -795,7 +795,7 @@ i2c_6: i2c@138c0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
@@ -808,7 +808,7 @@ i2c_7: i2c@138d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
@@ -864,7 +864,7 @@ i2s2: i2s@13970000 {
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index a421f11b3a57..44dcb1377475 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -65,7 +65,7 @@ soc: soc {
 
 		clock_audss: clock-controller@3810000 {
 			compatible = "samsung,exynos4210-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>,
@@ -113,28 +113,28 @@ mipi_phy: video-phy {
 
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_tv: power-domain@10023c20 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C20 0x20>;
+			reg = <0x10023c20 0x20>;
 			#power-domain-cells = <0>;
 			power-domains = <&pd_lcd0>;
 			label = "TV";
@@ -142,21 +142,21 @@ pd_tv: power-domain@10023c20 {
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_gps: power-domain@10023ce0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CE0 0x20>;
+			reg = <0x10023ce0 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS";
 		};
 
 		pd_gps_alive: power-domain@10023d00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023D00 0x20>;
+			reg = <0x10023d00 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS alive";
 		};
@@ -190,7 +190,7 @@ pmu_system_controller: system-controller@10020000 {
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -309,7 +309,7 @@ rtc: rtc@10070000 {
 
 		keypad: keypad@100a0000 {
 			compatible = "samsung,s5pv210-keypad";
-			reg = <0x100A0000 0x100>;
+			reg = <0x100a0000 0x100>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_KEYIF>;
 			clock-names = "keypad";
@@ -354,7 +354,7 @@ sdhci_3: mmc@12540000 {
 
 		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos4210-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
 			clock-names = "phy", "ref";
@@ -546,7 +546,7 @@ i2c_4: i2c@138a0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C4>;
 			clock-names = "i2c";
@@ -559,7 +559,7 @@ i2c_5: i2c@138b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C5>;
 			clock-names = "i2c";
@@ -572,7 +572,7 @@ i2c_6: i2c@138c0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C6>;
 			clock-names = "i2c";
@@ -585,7 +585,7 @@ i2c_7: i2c@138d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C7>;
 			clock-names = "i2c";
@@ -598,7 +598,7 @@ i2c_8: i2c@138e0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x138E0000 0x100>;
+			reg = <0x138e0000 0x100>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C_HDMI>;
 			clock-names = "i2c";
@@ -657,7 +657,7 @@ spi_2: spi@13940000 {
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
@@ -712,7 +712,7 @@ fimd: fimd@11c00000 {
 
 		tmu: tmu@100c0000 {
 			interrupt-parent = <&combiner>;
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <2 4>;
 			status = "disabled";
 			#thermal-sensor-cells = <0>;
@@ -739,7 +739,7 @@ rotator: rotator@12810000 {
 
 		hdmi: hdmi@12d00000 {
 			compatible = "samsung,exynos4210-hdmi";
-			reg = <0x12D00000 0x70000>;
+			reg = <0x12d00000 0x70000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 				      "sclk_hdmiphy", "mout_hdmi";
@@ -756,7 +756,7 @@ hdmi: hdmi@12d00000 {
 
 		hdmicec: cec@100b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x100B0000 0x200>;
+			reg = <0x100b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -770,7 +770,7 @@ hdmicec: cec@100b0000 {
 		mixer: mixer@12c10000 {
 			compatible = "samsung,exynos4210-mixer";
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+			reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
 			power-domains = <&pd_tv>;
 			iommus = <&sysmmu_tv>;
 			status = "disabled";
@@ -902,7 +902,7 @@ sysmmu_mfc_r: sysmmu@13630000 {
 
 		sysmmu_tv: sysmmu@12e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu", "master";
@@ -913,7 +913,7 @@ sysmmu_tv: sysmmu@12e20000 {
 
 		sysmmu_fimc0: sysmmu@11a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A20000 0x1000>;
+			reg = <0x11a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -924,7 +924,7 @@ sysmmu_fimc0: sysmmu@11a20000 {
 
 		sysmmu_fimc1: sysmmu@11a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A30000 0x1000>;
+			reg = <0x11a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 3>;
 			clock-names = "sysmmu", "master";
@@ -935,7 +935,7 @@ sysmmu_fimc1: sysmmu@11a30000 {
 
 		sysmmu_fimc2: sysmmu@11a40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A40000 0x1000>;
+			reg = <0x11a40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 4>;
 			clock-names = "sysmmu", "master";
@@ -946,7 +946,7 @@ sysmmu_fimc2: sysmmu@11a40000 {
 
 		sysmmu_fimc3: sysmmu@11a50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A50000 0x1000>;
+			reg = <0x11a50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 5>;
 			clock-names = "sysmmu", "master";
@@ -957,7 +957,7 @@ sysmmu_fimc3: sysmmu@11a50000 {
 
 		sysmmu_jpeg: sysmmu@11a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A60000 0x1000>;
+			reg = <0x11a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 6>;
 			clock-names = "sysmmu", "master";
@@ -968,7 +968,7 @@ sysmmu_jpeg: sysmmu@11a60000 {
 
 		sysmmu_rotator: sysmmu@12a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A30000 0x1000>;
+			reg = <0x12a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu", "master";
@@ -979,7 +979,7 @@ sysmmu_rotator: sysmmu@12a30000 {
 
 		sysmmu_fimd0: sysmmu@11e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11E20000 0x1000>;
+			reg = <0x11e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 2>;
 			clock-names = "sysmmu", "master";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 1b4e55822e7c..5a1ec714c612 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -264,7 +264,7 @@ smp-sram@1f000 {
 
 		pd_lcd1: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD1";
 		};
@@ -356,7 +356,7 @@ ppmu_lcd1: ppmu@12240000 {
 
 		sysmmu_g2d: sysmmu@12a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A20000 0x1000>;
+			reg = <0x12a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 7>;
 			clock-names = "sysmmu", "master";
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index a67cb61e3cbb..e42e39dc0e40 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -25,7 +25,7 @@ memory@40000000 {
 
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index a626d33d1330..d5074fa57142 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -33,7 +33,7 @@ chosen {
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index e7669b9e9edb..7c2780d3e37c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -19,7 +19,7 @@ chosen {
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	gpio_keys: gpio-keys {
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index a5ad88b897ff..42812da1f882 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -23,7 +23,7 @@ aliases {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 
 	vbus_otg_reg: regulator-1 {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 68d589e081bc..d5316cf2fbb6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -22,7 +22,7 @@ aliases {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x3FF00000>;
+		reg = <0x40000000 0x3ff00000>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index f4b68c75c962..7be4cbdc4413 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -17,6 +17,6 @@ / {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index a3905e27b9cd..ea9fd284386d 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -31,7 +31,7 @@ chosen {
 
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	mmc_reg: regulator-0 {
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 201c38edd48f..3e05a49f29ff 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -32,7 +32,7 @@ chosen {
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -198,7 +198,7 @@ adc@41 {
 			stmpe_adc {
 				compatible = "st,stmpe-adc";
 				#io-channel-cells = <1>;
-				st,norequest-mask = <0x2F>;
+				st,norequest-mask = <0x2f>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index f34c7400475b..11f9dd94b6b3 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -183,7 +183,7 @@ core3 {
 		cpu0: cpu@a00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
+			reg = <0xa00>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -193,7 +193,7 @@ cpu0: cpu@a00 {
 		cpu1: cpu@a01 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
+			reg = <0xa01>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -203,7 +203,7 @@ cpu1: cpu@a01 {
 		cpu2: cpu@a02 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
+			reg = <0xa02>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -213,7 +213,7 @@ cpu2: cpu@a02 {
 		cpu3: cpu@a03 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
+			reg = <0xa03>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -376,7 +376,7 @@ pinctrl_2: pinctrl@3860000 {
 
 		pinctrl_3: pinctrl@106e0000 {
 			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106E0000 0x1000>;
+			reg = <0x106e0000 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -400,7 +400,7 @@ smp-sram@2f000 {
 
 		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "ISP";
 		};
@@ -460,7 +460,7 @@ watchdog: watchdog@10060000 {
 
 		adc: adc@126c0000 {
 			compatible = "samsung,exynos4212-adc";
-			reg = <0x126C0000 0x100>;
+			reg = <0x126c0000 0x100>;
 			interrupt-parent = <&combiner>;
 			interrupts = <10 3>;
 			clocks = <&clock CLK_TSADC>;
@@ -493,7 +493,7 @@ mshc_0: mmc@12550000 {
 
 		sysmmu_g2d: sysmmu@10a40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A40000 0x1000>;
+			reg = <0x10a40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 7>;
 			clock-names = "sysmmu", "master";
@@ -525,7 +525,7 @@ sysmmu_fimc_drc: sysmmu@12270000 {
 
 		sysmmu_fimc_fd: sysmmu@122a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122A0000 0x1000>;
+			reg = <0x122a0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 4>;
 			power-domains = <&pd_isp>;
@@ -536,7 +536,7 @@ sysmmu_fimc_fd: sysmmu@122a0000 {
 
 		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122B0000 0x1000>;
+			reg = <0x122b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 5>;
 			power-domains = <&pd_isp>;
@@ -547,7 +547,7 @@ sysmmu_fimc_mcuctl: sysmmu@122b0000 {
 
 		sysmmu_fimc_lite0: sysmmu@123b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123B0000 0x1000>;
+			reg = <0x123b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 0>;
 			power-domains = <&pd_isp>;
@@ -559,7 +559,7 @@ sysmmu_fimc_lite0: sysmmu@123b0000 {
 
 		sysmmu_fimc_lite1: sysmmu@123c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123C0000 0x1000>;
+			reg = <0x123c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 1>;
 			power-domains = <&pd_isp>;
@@ -614,7 +614,7 @@ fimc_lite_0: fimc-lite@12390000 {
 
 	fimc_lite_1: fimc-lite@123a0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123A0000 0x1000>;
+		reg = <0x123a0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -811,7 +811,7 @@ &tmu {
 	compatible = "samsung,exynos4412-tmu";
 	interrupt-parent = <&combiner>;
 	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
+	reg = <0x100c0000 0x100>;
 	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
 	status = "disabled";
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index c8da0d4b1b33..48e43b6b3213 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -104,31 +104,31 @@ sysreg_system_controller: syscon@10050000 {
 
 		serial_0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_3: serial@12c30000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C30000 0x100>;
+			reg = <0x12c30000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		i2c_0: i2c@12c60000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C60000 0x100>;
+			reg = <0x12c60000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -138,7 +138,7 @@ i2c_0: i2c@12c60000 {
 
 		i2c_1: i2c@12c70000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C70000 0x100>;
+			reg = <0x12c70000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -148,7 +148,7 @@ i2c_1: i2c@12c70000 {
 
 		i2c_2: i2c@12c80000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C80000 0x100>;
+			reg = <0x12c80000 0x100>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,7 +158,7 @@ i2c_2: i2c@12c80000 {
 
 		i2c_3: i2c@12c90000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C90000 0x100>;
+			reg = <0x12c90000 0x100>;
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -168,7 +168,7 @@ i2c_3: i2c@12c90000 {
 
 		pwm: pwm@12dd0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x12DD0000 0x100>;
+			reg = <0x12dd0000 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
@@ -180,7 +180,7 @@ pwm: pwm@12dd0000 {
 
 		rtc: rtc@101e0000 {
 			compatible = "samsung,s3c6410-rtc";
-			reg = <0x101E0000 0x100>;
+			reg = <0x101e0000 0x100>;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -198,7 +198,7 @@ fimd: fimd@14400000 {
 
 		dp: dp-controller@145b0000 {
 			compatible = "samsung,exynos5-dp";
-			reg = <0x145B0000 0x1000>;
+			reg = <0x145b0000 0x1000>;
 			interrupts = <10 3>;
 			interrupt-parent = <&combiner>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 5b5aa79988e9..97e89859ba3d 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -216,14 +216,14 @@ pd_g3d: power-domain@10044060 {
 
 		pd_disp1: power-domain@100440a0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440A0 0x20>;
+			reg = <0x100440a0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP1";
 		};
 
 		pd_mau: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -236,7 +236,7 @@ clock: clock-controller@10010000 {
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5250-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
@@ -247,7 +247,7 @@ clock_audss: audss-clock-controller@3810000 {
 		timer@101c0000 {
 			compatible = "samsung,exynos5250-mct",
 				     "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
+			reg = <0x101c0000 0x800>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts-extended = <&combiner 23 3>,
@@ -302,7 +302,7 @@ pmu_system_controller: system-controller@10040000 {
 
 		watchdog@101d0000 {
 			compatible = "samsung,exynos5250-wdt";
-			reg = <0x101D0000 0x100>;
+			reg = <0x101d0000 0x100>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_WDT>;
 			clock-names = "watchdog";
@@ -322,7 +322,7 @@ mfc: codec@11000000 {
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -387,7 +387,7 @@ tmu: tmu@10060000 {
 
 		sata: sata@122f0000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0x122F0000 0x1ff>;
+			reg = <0x122f0000 0x1ff>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
 			clock-names = "sata", "pclk";
@@ -410,7 +410,7 @@ sata_phy: sata-phy@12170000 {
 		/* i2c_0-3 are defined in exynos5.dtsi */
 		i2c_4: i2c@12ca0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CA0000 0x100>;
+			reg = <0x12ca0000 0x100>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -423,7 +423,7 @@ i2c_4: i2c@12ca0000 {
 
 		i2c_5: i2c@12cb0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CB0000 0x100>;
+			reg = <0x12cb0000 0x100>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -436,7 +436,7 @@ i2c_5: i2c@12cb0000 {
 
 		i2c_6: i2c@12cc0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CC0000 0x100>;
+			reg = <0x12cc0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -449,7 +449,7 @@ i2c_6: i2c@12cc0000 {
 
 		i2c_7: i2c@12cd0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CD0000 0x100>;
+			reg = <0x12cd0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -462,7 +462,7 @@ i2c_7: i2c@12cd0000 {
 
 		i2c_8: i2c@12ce0000 {
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x12CE0000 0x1000>;
+			reg = <0x12ce0000 0x1000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -478,7 +478,7 @@ hdmiphy: hdmi-phy@38 {
 
 		i2c_9: i2c@121d0000 {
 			compatible = "samsung,exynos5-sata-phy-i2c";
-			reg = <0x121D0000 0x100>;
+			reg = <0x121d0000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_SATA_PHYI2C>;
@@ -608,7 +608,7 @@ i2s0: i2s@3830000 {
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -623,7 +623,7 @@ i2s1: i2s@12d60000 {
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -695,7 +695,7 @@ usb2_phy_gen: phy@12130000 {
 
 		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -704,7 +704,7 @@ pdma0: dma-controller@121a0000 {
 
 		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -722,7 +722,7 @@ mdma0: dma-controller@10800000 {
 
 		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
@@ -787,7 +787,7 @@ hdmi: hdmi@14530000 {
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -838,7 +838,7 @@ dsi_0: dsi@14500000 {
 
 		adc: adc@12d10000 {
 			compatible = "samsung,exynos-adc-v1";
-			reg = <0x12D10000 0x100>;
+			reg = <0x12d10000 0x100>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ADC>;
 			clock-names = "adc";
@@ -849,7 +849,7 @@ adc: adc@12d10000 {
 
 		sysmmu_g2d: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -881,7 +881,7 @@ sysmmu_mfc_l: sysmmu@11210000 {
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -891,7 +891,7 @@ sysmmu_rotator: sysmmu@11d40000 {
 
 		sysmmu_jpeg: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			power-domains = <&pd_gsc>;
@@ -922,7 +922,7 @@ sysmmu_fimc_drc: sysmmu@13270000 {
 
 		sysmmu_fimc_fd: sysmmu@132a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132A0000 0x1000>;
+			reg = <0x132a0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu";
@@ -952,7 +952,7 @@ sysmmu_fimc_scp: sysmmu@13290000 {
 
 		sysmmu_fimc_mcuctl: sysmmu@132b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132B0000 0x1000>;
+			reg = <0x132b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu";
@@ -962,7 +962,7 @@ sysmmu_fimc_mcuctl: sysmmu@132b0000 {
 
 		sysmmu_fimc_odc: sysmmu@132c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132C0000 0x1000>;
+			reg = <0x132c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <11 0>;
 			clock-names = "sysmmu";
@@ -972,7 +972,7 @@ sysmmu_fimc_odc: sysmmu@132c0000 {
 
 		sysmmu_fimc_dis0: sysmmu@132d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132D0000 0x1000>;
+			reg = <0x132d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <10 4>;
 			clock-names = "sysmmu";
@@ -982,7 +982,7 @@ sysmmu_fimc_dis0: sysmmu@132d0000 {
 
 		sysmmu_fimc_dis1: sysmmu@132e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132E0000 0x1000>;
+			reg = <0x132e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <9 4>;
 			clock-names = "sysmmu";
@@ -992,7 +992,7 @@ sysmmu_fimc_dis1: sysmmu@132e0000 {
 
 		sysmmu_fimc_3dnr: sysmmu@132f0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132F0000 0x1000>;
+			reg = <0x132f0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 6>;
 			clock-names = "sysmmu";
@@ -1002,7 +1002,7 @@ sysmmu_fimc_3dnr: sysmmu@132f0000 {
 
 		sysmmu_fimc_lite0: sysmmu@13c40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C40000 0x1000>;
+			reg = <0x13c40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <3 4>;
 			power-domains = <&pd_gsc>;
@@ -1013,7 +1013,7 @@ sysmmu_fimc_lite0: sysmmu@13c40000 {
 
 		sysmmu_fimc_lite1: sysmmu@13c50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C50000 0x1000>;
+			reg = <0x13c50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 1>;
 			power-domains = <&pd_gsc>;
@@ -1024,7 +1024,7 @@ sysmmu_fimc_lite1: sysmmu@13c50000 {
 
 		sysmmu_gsc0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			power-domains = <&pd_gsc>;
@@ -1035,7 +1035,7 @@ sysmmu_gsc0: sysmmu@13e80000 {
 
 		sysmmu_gsc1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			power-domains = <&pd_gsc>;
@@ -1046,7 +1046,7 @@ sysmmu_gsc1: sysmmu@13e90000 {
 
 		sysmmu_gsc2: sysmmu@13ea0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EA0000 0x1000>;
+			reg = <0x13ea0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 4>;
 			power-domains = <&pd_gsc>;
@@ -1057,7 +1057,7 @@ sysmmu_gsc2: sysmmu@13ea0000 {
 
 		sysmmu_gsc3: sysmmu@13eb0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EB0000 0x1000>;
+			reg = <0x13eb0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 6>;
 			power-domains = <&pd_gsc>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index ff1ee409eff3..a97449b4640c 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -177,7 +177,7 @@ clock_kfc: clock-controller@10700000 {
 
 		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
+			reg = <0x10a00000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
@@ -187,7 +187,7 @@ clock_g2d: clock-controller@10a00000 {
 
 		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
+			reg = <0x10ce0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>;
 			clock-names = "fin_pll";
@@ -213,7 +213,7 @@ clock_g3d: clock-controller@11830000 {
 
 		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
+			reg = <0x122e0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&fin_pll>,
@@ -233,7 +233,7 @@ clock_fsys: clock-controller@122e0000 {
 
 		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
+			reg = <0x128c0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_FOUT_AUD_PLL>,
@@ -247,7 +247,7 @@ clock_aud: clock-controller@128c0000 {
 
 		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
+			reg = <0x133c0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
@@ -261,7 +261,7 @@ clock_isp: clock-controller@133c0000 {
 
 		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
+			reg = <0x13f00000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
@@ -335,7 +335,7 @@ chipid: chipid@10000000 {
 		mct: timer@100b0000 {
 			compatible = "samsung,exynos5260-mct",
 				     "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
+			reg = <0x100b0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -356,8 +356,8 @@ cci: cci@10f00000 {
 			compatible = "arm,cci-400";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
+			reg = <0x10f00000 0x1000>;
+			ranges = <0x0 0x10f00000 0x6000>;
 
 			cci_control0: slave-if@4000 {
 				compatible = "arm,cci-400-ctrl-if";
@@ -392,18 +392,18 @@ pinctrl_1: pinctrl@12290000 {
 
 		pinctrl_2: pinctrl@128b0000 {
 			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
+			reg = <0x128b0000 0x1000>;
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10d50000 {
 			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
+			reg = <0x10d50000 0x10000>;
 		};
 
 		uart0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -412,7 +412,7 @@ uart0: serial@12c00000 {
 
 		uart1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -421,7 +421,7 @@ uart1: serial@12c10000 {
 
 		uart2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -499,7 +499,7 @@ mmc_2: mmc@12160000 {
 
 		hsi2c_0: i2c@12da0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DA0000 0x1000>;
+			reg = <0x12da0000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -512,7 +512,7 @@ hsi2c_0: i2c@12da0000 {
 
 		hsi2c_1: i2c@12db0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DB0000 0x1000>;
+			reg = <0x12db0000 0x1000>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -525,7 +525,7 @@ hsi2c_1: i2c@12db0000 {
 
 		hsi2c_2: i2c@12dc0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DC0000 0x1000>;
+			reg = <0x12dc0000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -538,7 +538,7 @@ hsi2c_2: i2c@12dc0000 {
 
 		hsi2c_3: i2c@12dd0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DD0000 0x1000>;
+			reg = <0x12dd0000 0x1000>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 8a6b890fb8f7..350b8afa0a3a 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -81,7 +81,7 @@ clock: clock-controller@10010000 {
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5410-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
 			clock-names = "pll_ref", "pll_in";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 96f92faa70e0..13d7be236a23 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -293,7 +293,7 @@ clock: clock-controller@10010000 {
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5420-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
 				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
@@ -373,37 +373,37 @@ dmc: memory-controller@10c20000 {
 
 		nocp_mem0_0: nocp@10ca1000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1000 0x200>;
+			reg = <0x10ca1000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem0_1: nocp@10ca1400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1400 0x200>;
+			reg = <0x10ca1400 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_0: nocp@10ca1800 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1800 0x200>;
+			reg = <0x10ca1800 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_1: nocp@10ca1c00 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1C00 0x200>;
+			reg = <0x10ca1c00 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_0: nocp@11a51000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51000 0x200>;
+			reg = <0x11a51000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_1: nocp@11a51400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51400 0x200>;
+			reg = <0x11a51400 0x200>;
 			status = "disabled";
 		};
 
@@ -485,14 +485,14 @@ g3d_pd: power-domain@10044080 {
 
 		disp_pd: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP";
 		};
 
 		mau_pd: power-domain@100440e0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440E0 0x20>;
+			reg = <0x100440e0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -553,7 +553,7 @@ adma: dma-controller@3880000 {
 
 		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -562,7 +562,7 @@ pdma0: dma-controller@121a0000 {
 
 		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -580,7 +580,7 @@ mdma0: dma-controller@10800000 {
 
 		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
@@ -618,7 +618,7 @@ i2s0: i2s@3830000 {
 
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -634,7 +634,7 @@ i2s1: i2s@12d60000 {
 
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -723,7 +723,7 @@ dsi: dsi@14500000 {
 
 		hsi2c_8: i2c@12e00000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E00000 0x1000>;
+			reg = <0x12e00000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -736,7 +736,7 @@ hsi2c_8: i2c@12e00000 {
 
 		hsi2c_9: i2c@12e10000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E10000 0x1000>;
+			reg = <0x12e10000 0x1000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -749,7 +749,7 @@ hsi2c_9: i2c@12e10000 {
 
 		hsi2c_10: i2c@12e20000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -777,12 +777,12 @@ hdmi: hdmi@14530000 {
 		};
 
 		hdmiphy: hdmi-phy@145d0000 {
-			reg = <0x145D0000 0x20>;
+			reg = <0x145d0000 0x20>;
 		};
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -807,7 +807,7 @@ mixer: mixer@14450000 {
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -916,7 +916,7 @@ scaler_2: scaler@12820000 {
 
 		jpeg_0: jpeg@11f50000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F50000 0x1000>;
+			reg = <0x11f50000 0x1000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG>;
@@ -925,7 +925,7 @@ jpeg_0: jpeg@11f50000 {
 
 		jpeg_1: jpeg@11f60000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F60000 0x1000>;
+			reg = <0x11f60000 0x1000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG2>;
@@ -990,7 +990,7 @@ tmu_gpu: tmu@100a0000 {
 
 		sysmmu_g2dr: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -1000,7 +1000,7 @@ sysmmu_g2dr: sysmmu@10a60000 {
 
 		sysmmu_g2dw: sysmmu@10a70000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A70000 0x1000>;
+			reg = <0x10a70000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 2>;
 			clock-names = "sysmmu", "master";
@@ -1021,7 +1021,7 @@ sysmmu_tv: sysmmu@14650000 {
 
 		sysmmu_gscl0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			clock-names = "sysmmu", "master";
@@ -1032,7 +1032,7 @@ sysmmu_gscl0: sysmmu@13e80000 {
 
 		sysmmu_gscl1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			clock-names = "sysmmu", "master";
@@ -1064,7 +1064,7 @@ sysmmu_scaler1r: sysmmu@12890000 {
 
 		sysmmu_scaler2r: sysmmu@128a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128A0000 0x1000>;
+			reg = <0x128a0000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
@@ -1074,7 +1074,7 @@ sysmmu_scaler2r: sysmmu@128a0000 {
 
 		sysmmu_scaler0w: sysmmu@128c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128C0000 0x1000>;
+			reg = <0x128c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <27 2>;
 			clock-names = "sysmmu", "master";
@@ -1085,7 +1085,7 @@ sysmmu_scaler0w: sysmmu@128c0000 {
 
 		sysmmu_scaler1w: sysmmu@128d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128D0000 0x1000>;
+			reg = <0x128d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 6>;
 			clock-names = "sysmmu", "master";
@@ -1096,7 +1096,7 @@ sysmmu_scaler1w: sysmmu@128d0000 {
 
 		sysmmu_scaler2w: sysmmu@128e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128E0000 0x1000>;
+			reg = <0x128e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <19 6>;
 			clock-names = "sysmmu", "master";
@@ -1107,7 +1107,7 @@ sysmmu_scaler2w: sysmmu@128e0000 {
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -1117,7 +1117,7 @@ sysmmu_rotator: sysmmu@11d40000 {
 
 		sysmmu_jpeg0: sysmmu@11f10000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F10000 0x1000>;
+			reg = <0x11f10000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -1127,7 +1127,7 @@ sysmmu_jpeg0: sysmmu@11f10000 {
 
 		sysmmu_jpeg1: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 06103dd37265..30fc677d8bac 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -16,7 +16,7 @@
 / {
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7EA00000>;
+		reg = <0x40000000 0x7ea00000>;
 	};
 
 	chosen {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH 7/9] ARM: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:11 +0100, Krzysztof Kozlowski wrote:
> By convention the hex addresses should be lowercase.
> 
> 

Applied, thanks!

[7/9] ARM: dts: exynos: use lowercase hex addresses
      https://git.kernel.org/krzk/linux/c/9ca5a7ce492d182c25ea2e785eeb72cee1d5056b

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH 7/9] ARM: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:11 +0100, Krzysztof Kozlowski wrote:
> By convention the hex addresses should be lowercase.
> 
> 

Applied, thanks!

[7/9] ARM: dts: exynos: use lowercase hex addresses
      https://git.kernel.org/krzk/linux/c/9ca5a7ce492d182c25ea2e785eeb72cee1d5056b

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 8/9] arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos5433-bus.dtsi:10.20-16.4:
    Warning (simple_bus_reg): /soc@0/bus0: missing or empty reg/ranges property

and dtbs_check:

  exynos5433-tm2.dtb: soc@0: bus1:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[21, 220]], 'clock-names': ['bus'], 'operating-points-v2': [[165]], 'status': ['okay'], 'devfreq': [[166]]} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
index 72ccf18eb9d1..540b4d6c9067 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -6,7 +6,7 @@
  * Chanwoo Choi <cw00.choi@samsung.com>
  */
 
-&soc {
+/ {
 	bus_g2d_400: bus0 {
 		compatible = "samsung,exynos-bus";
 		clocks = <&cmu_top CLK_ACLK_G2D_400>;
-- 
2.34.1

[PATCH 8/9] arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
as reported by dtc W=1:

  exynos5433-bus.dtsi:10.20-16.4:
    Warning (simple_bus_reg): /soc@0/bus0: missing or empty reg/ranges property

and dtbs_check:

  exynos5433-tm2.dtb: soc@0: bus1:
    {'compatible': ['samsung,exynos-bus'], 'clocks': [[21, 220]], 'clock-names': ['bus'], 'operating-points-v2': [[165]], 'status': ['okay'], 'devfreq': [[166]]} should not be valid under {'type': 'object'}

Move the bus nodes and their OPP tables out of SoC to fix this.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
index 72ccf18eb9d1..540b4d6c9067 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -6,7 +6,7 @@
  * Chanwoo Choi <cw00.choi@samsung.com>
  */
 
-&soc {
+/ {
 	bus_g2d_400: bus0 {
 		compatible = "samsung,exynos-bus";
 		clocks = <&cmu_top CLK_ACLK_G2D_400>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 9/9] arm64: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

By convention the hex addresses should be lowercase.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi      | 12 ++++++------
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts |  2 +-
 arch/arm64/boot/dts/exynos/exynos7.dtsi         |  6 +++---
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 47b5ac06f0d6..9da24fe958a3 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -351,7 +351,7 @@ psci {
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -1020,7 +1020,7 @@ decon_tv: decon@13880000 {
 
 		dsi: dsi@13900000 {
 			compatible = "samsung,exynos5433-mipi-dsi";
-			reg = <0x13900000 0xC0>;
+			reg = <0x13900000 0xc0>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
@@ -1272,7 +1272,7 @@ jpeg: codec@15020000 {
 
 		mfc: codec@152e0000 {
 			compatible = "samsung,exynos5433-mfc";
-			reg = <0x152E0000 0x10000>;
+			reg = <0x152e0000 0x10000>;
 			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "pclk", "aclk", "aclk_xiu";
 			clocks = <&cmu_mfc CLK_PCLK_MFC>,
@@ -1329,7 +1329,7 @@ sysmmu_tv1x: sysmmu@13a30000 {
 
 		sysmmu_gscl0: sysmmu@13c80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C80000 0x1000>;
+			reg = <0x13c80000 0x1000>;
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
@@ -1340,7 +1340,7 @@ sysmmu_gscl0: sysmmu@13c80000 {
 
 		sysmmu_gscl1: sysmmu@13c90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C90000 0x1000>;
+			reg = <0x13c90000 0x1000>;
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
@@ -1351,7 +1351,7 @@ sysmmu_gscl1: sysmmu@13c90000 {
 
 		sysmmu_gscl2: sysmmu@13ca0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13CA0000 0x1000>;
+			reg = <0x13ca0000 0x1000>;
 			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index abb3bd700d6f..f3f4a6ab4b49 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -28,7 +28,7 @@ chosen {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x0 0x40000000 0x0 0xC0000000>;
+		reg = <0x0 0x40000000 0x0 0xc0000000>;
 	};
 
 	usb30_vbus_reg: regulator-usb30 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index f378d8629d88..82fee1b7caab 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -119,7 +119,7 @@ psci {
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -146,7 +146,7 @@ gic: interrupt-controller@11001000 {
 
 		pdma0: dma-controller@10e10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10E10000 0x1000>;
+			reg = <0x10e10000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -155,7 +155,7 @@ pdma0: dma-controller@10e10000 {
 
 		pdma1: dma-controller@10eb0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10EB0000 0x1000>;
+			reg = <0x10eb0000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA1>;
 			clock-names = "apb_pclk";
-- 
2.34.1

[PATCH 9/9] arm64: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

By convention the hex addresses should be lowercase.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi      | 12 ++++++------
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts |  2 +-
 arch/arm64/boot/dts/exynos/exynos7.dtsi         |  6 +++---
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 47b5ac06f0d6..9da24fe958a3 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -351,7 +351,7 @@ psci {
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -1020,7 +1020,7 @@ decon_tv: decon@13880000 {
 
 		dsi: dsi@13900000 {
 			compatible = "samsung,exynos5433-mipi-dsi";
-			reg = <0x13900000 0xC0>;
+			reg = <0x13900000 0xc0>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
@@ -1272,7 +1272,7 @@ jpeg: codec@15020000 {
 
 		mfc: codec@152e0000 {
 			compatible = "samsung,exynos5433-mfc";
-			reg = <0x152E0000 0x10000>;
+			reg = <0x152e0000 0x10000>;
 			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "pclk", "aclk", "aclk_xiu";
 			clocks = <&cmu_mfc CLK_PCLK_MFC>,
@@ -1329,7 +1329,7 @@ sysmmu_tv1x: sysmmu@13a30000 {
 
 		sysmmu_gscl0: sysmmu@13c80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C80000 0x1000>;
+			reg = <0x13c80000 0x1000>;
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
@@ -1340,7 +1340,7 @@ sysmmu_gscl0: sysmmu@13c80000 {
 
 		sysmmu_gscl1: sysmmu@13c90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C90000 0x1000>;
+			reg = <0x13c90000 0x1000>;
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
@@ -1351,7 +1351,7 @@ sysmmu_gscl1: sysmmu@13c90000 {
 
 		sysmmu_gscl2: sysmmu@13ca0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13CA0000 0x1000>;
+			reg = <0x13ca0000 0x1000>;
 			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index abb3bd700d6f..f3f4a6ab4b49 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -28,7 +28,7 @@ chosen {
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x0 0x40000000 0x0 0xC0000000>;
+		reg = <0x0 0x40000000 0x0 0xc0000000>;
 	};
 
 	usb30_vbus_reg: regulator-usb30 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index f378d8629d88..82fee1b7caab 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -119,7 +119,7 @@ psci {
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -146,7 +146,7 @@ gic: interrupt-controller@11001000 {
 
 		pdma0: dma-controller@10e10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10E10000 0x1000>;
+			reg = <0x10e10000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -155,7 +155,7 @@ pdma0: dma-controller@10e10000 {
 
 		pdma1: dma-controller@10eb0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10EB0000 0x1000>;
+			reg = <0x10eb0000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA1>;
 			clock-names = "apb_pclk";
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH 9/9] arm64: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:13 +0100, Krzysztof Kozlowski wrote:
> By convention the hex addresses should be lowercase.
> 
> 

Applied, thanks!

[9/9] arm64: dts: exynos: use lowercase hex addresses
      https://git.kernel.org/krzk/linux/c/5cff13f07eec38ecb70e6839060d0a795b690a53

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH 9/9] arm64: dts: exynos: use lowercase hex addresses

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:13 +0100, Krzysztof Kozlowski wrote:
> By convention the hex addresses should be lowercase.
> 
> 

Applied, thanks!

[9/9] arm64: dts: exynos: use lowercase hex addresses
      https://git.kernel.org/krzk/linux/c/5cff13f07eec38ecb70e6839060d0a795b690a53

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH 1/9] ARM: dts: exynos: correct HDMI phy compatible in Exynos4

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:05 +0100, Krzysztof Kozlowski wrote:
> The HDMI phy compatible was missing vendor prefix.
> 
> 

Applied, thanks!

[1/9] ARM: dts: exynos: correct HDMI phy compatible in Exynos4
      https://git.kernel.org/krzk/linux/c/af1c89ddb74f170eccd5a57001d7317560b638ea

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH 1/9] ARM: dts: exynos: correct HDMI phy compatible in Exynos4

[Krzysztof Kozlowski]

On Wed, 25 Jan 2023 10:45:05 +0100, Krzysztof Kozlowski wrote:
> The HDMI phy compatible was missing vendor prefix.
> 
> 

Applied, thanks!

[1/9] ARM: dts: exynos: correct HDMI phy compatible in Exynos4
      https://git.kernel.org/krzk/linux/c/af1c89ddb74f170eccd5a57001d7317560b638ea

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel