[PATCH v10 0/5] Add function suspend/resume and remote wakeup support

[PATCH v10 0/5] Add function suspend/resume and remote wakeup support

[Elson Roy Serrao]

Changes in v10
 - Modified the return value to 0 in ecm_get_status() so that device responds
   with both remote wakeup armed and remote wakeup capable bit reset to 0.
 - Return negative errno if wakeup is not supported when func suspend feature
   selector is sent by the host.

Changes in v9
 - Added bmAtrributes wakeup bit check for arming the function for function
   remote wakeup and also in get_status api

Changes in v8
 - Added else case to return error value while setting remote wakeup feature
   selector so that device will respond with a protocl stall

Changes in v7
 - Added a check to set device remote wakeup feature selector in ep0.c based on whether
   the device is configured for remote wakeup.
 - Commit message and usb_func_wakeup documentation changes.

Changes in v6
 - Combined usb_gadget_func_wakeup API with usb_func_wakeup API in composite layer
   so that there is only 1 API for triggering function remote wakeup for better error
   handling. Since function suspend is something specific to usb functions, better to
   keep the related APIs in composite layer and above. Also documented the usage and
   applicability of the usb_func_wakeup API.

Changes in v5
 - Add wakeup_armed check in patch2 in the link status change event handler
   so that resume gets triggeed only in the remote wakeup context.
 - Costmetic changes in patch3 and patch4

Changes in v4
 - Moved the wakeup bit check to bind function for warning the user at an early
   stage itself.
 - Added the remote wakeup configured check to gadget_wakeup() and func_wakeup()
   routines so that wakeup can be triggered only if user has configured it.
 - Cosmetic changes with respect to renaming the variables to reflect the operation
   better.

Changes in v3
 - Modified rw_capable flag to reflect the gadgets capability for wakeup
   signalling.
 - Added a check to configure wakeup bit in bmAttributes only if gadget
   is capable of triggering wakeup.
 - Implemented a gadget op for composite layer to inform UDC whether device
   is configured for remote wakeup.
 - Added a check in __usb_gadget_wakeup() API to trigger wakeup only if the
   device is configured for it.
 - Cosmetic changes in dwc3_gadget_func_wakeup() API.

Changes in v2
 - Added a flag to indicate whether the device is remote wakeup capable.
 - Added an async parameter to _dwc3_gadget_wakeup() API and few cosmetic
   changes.
 - Added flags to reflect the state of  function suspend and function remote
   wakeup to usb_function struct rather than function specific struct (f_ecm).
 - Changed the dwc3_gadget_func__wakeup() API to run synchronously by first
   checking the link state and then sending the device notification. Also
   added debug log for DEVICE_NOTIFICATION generic cmd.
 - Added changes to arm the device for remotewakeup/function remotewakeup
   only if device is capable.

An usb device can initate a remote wakeup and bring the link out of
suspend as dictated by the DEVICE_REMOTE_WAKEUP feature selector.
To achieve this an interface can invoke gadget_wakeup op and wait for the
device to come out of LPM. But the current polling based implementation
fails if the host takes a long time to drive the resume signaling specially
in high speed capable devices. Switching to an interrupt based approach is
more robust and efficient. This can be leveraged by enabling link status
change events and triggering a gadget resume when the link comes to active
state.

If the device is enhanced super-speed capable, individual interfaces can
also be put into suspend state. An interface can be in function suspend
state even when the device is not in suspend state. Function suspend state
is retained throughout the device suspend entry and exit process.
A function can be put to function suspend through FUNCTION_SUSPEND feature
selector sent by the host. This setup packet also decides whether that
function is capable of initiating a function remote wakeup. When the
function sends a wakeup notification to the host the link must be first
brought to a non-U0 state and then this notification is sent.

This change adds the infrastructure needed to support the above
functionalities.

Elson Roy Serrao (5):
  usb: gadget: Properly configure the device for remote wakeup
  usb: dwc3: Add remote wakeup handling
  usb: gadget: Add function wakeup support
  usb: dwc3: Add function suspend and function wakeup support
  usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

 drivers/usb/dwc3/core.h               |   5 ++
 drivers/usb/dwc3/debug.h              |   2 +
 drivers/usb/dwc3/ep0.c                |  19 +++---
 drivers/usb/dwc3/gadget.c             | 118 ++++++++++++++++++++++++++++++++--
 drivers/usb/gadget/composite.c        |  58 +++++++++++++++++
 drivers/usb/gadget/configfs.c         |   3 +
 drivers/usb/gadget/function/f_ecm.c   |  77 ++++++++++++++++++++++
 drivers/usb/gadget/function/u_ether.c |  63 ++++++++++++++++++
 drivers/usb/gadget/function/u_ether.h |   4 ++
 drivers/usb/gadget/udc/core.c         |  27 ++++++++
 drivers/usb/gadget/udc/trace.h        |   5 ++
 include/linux/usb/composite.h         |   8 +++
 include/linux/usb/gadget.h            |   9 +++
 13 files changed, 384 insertions(+), 14 deletions(-)

-- 
2.7.4

[PATCH v10 1/5] usb: gadget: Properly configure the device for remote wakeup

[Elson Roy Serrao]

The wakeup bit in the bmAttributes field indicates whether the device
is configured for remote wakeup. But this field should be allowed to
set only if the UDC supports such wakeup mechanism. So configure this
field based on UDC capability. Also inform the UDC whether the device
is configured for remote wakeup by implementing a gadget op.

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
---
 drivers/usb/gadget/composite.c | 18 ++++++++++++++++++
 drivers/usb/gadget/configfs.c  |  3 +++
 drivers/usb/gadget/udc/core.c  | 27 +++++++++++++++++++++++++++
 drivers/usb/gadget/udc/trace.h |  5 +++++
 include/linux/usb/composite.h  |  2 ++
 include/linux/usb/gadget.h     |  8 ++++++++
 6 files changed, 63 insertions(+)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 36add18..c9c983e 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -513,6 +513,19 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
 		return min(val, 900U) / 8;
 }
 
+void check_remote_wakeup_config(struct usb_gadget *g,
+				struct usb_configuration *c)
+{
+	if (USB_CONFIG_ATT_WAKEUP & c->bmAttributes) {
+		/* Reset the rw bit if gadget is not capable of it */
+		if (!g->wakeup_capable && g->ops->set_remote_wakeup) {
+			WARN(c->cdev, "Clearing wakeup bit for config c.%d\n",
+			     c->bConfigurationValue);
+			c->bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
+		}
+	}
+}
+
 static int config_buf(struct usb_configuration *config,
 		enum usb_device_speed speed, void *buf, u8 type)
 {
@@ -994,6 +1007,11 @@ static int set_config(struct usb_composite_dev *cdev,
 		power = min(power, 500U);
 	else
 		power = min(power, 900U);
+
+	if (USB_CONFIG_ATT_WAKEUP & c->bmAttributes)
+		usb_gadget_set_remote_wakeup(gadget, 1);
+	else
+		usb_gadget_set_remote_wakeup(gadget, 0);
 done:
 	if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
 		usb_gadget_set_selfpowered(gadget);
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index b9f1136..4c639e9 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1761,6 +1761,9 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
 		if (gadget_is_otg(gadget))
 			c->descriptors = otg_desc;
 
+		/* Properly configure the bmAttributes wakeup bit */
+		check_remote_wakeup_config(gadget, c);
+
 		cfg = container_of(c, struct config_usb_cfg, c);
 		if (!list_empty(&cfg->string_list)) {
 			i = 0;
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 23b0629..3dcbba7 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -514,6 +514,33 @@ int usb_gadget_wakeup(struct usb_gadget *gadget)
 EXPORT_SYMBOL_GPL(usb_gadget_wakeup);
 
 /**
+ * usb_gadget_set_remote_wakeup - configures the device remote wakeup feature.
+ * @gadget:the device being configured for remote wakeup
+ * @set:value to be configured.
+ *
+ * set to one to enable remote wakeup feature and zero to disable it.
+ *
+ * returns zero on success, else negative errno.
+ */
+int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set)
+{
+	int ret = 0;
+
+	if (!gadget->ops->set_remote_wakeup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->set_remote_wakeup(gadget, set);
+
+out:
+	trace_usb_gadget_set_remote_wakeup(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_remote_wakeup);
+
+/**
  * usb_gadget_set_selfpowered - sets the device selfpowered feature.
  * @gadget:the device being declared as self-powered
  *
diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h
index abdbcb1..a5ed26f 100644
--- a/drivers/usb/gadget/udc/trace.h
+++ b/drivers/usb/gadget/udc/trace.h
@@ -91,6 +91,11 @@ DEFINE_EVENT(udc_log_gadget, usb_gadget_wakeup,
 	TP_ARGS(g, ret)
 );
 
+DEFINE_EVENT(udc_log_gadget, usb_gadget_set_remote_wakeup,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
 DEFINE_EVENT(udc_log_gadget, usb_gadget_set_selfpowered,
 	TP_PROTO(struct usb_gadget *g, int ret),
 	TP_ARGS(g, ret)
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 608dc96..d949e91 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -413,6 +413,8 @@ extern int composite_dev_prepare(struct usb_composite_driver *composite,
 extern int composite_os_desc_req_prepare(struct usb_composite_dev *cdev,
 					 struct usb_ep *ep0);
 void composite_dev_cleanup(struct usb_composite_dev *cdev);
+void check_remote_wakeup_config(struct usb_gadget *g,
+				struct usb_configuration *c);
 
 static inline struct usb_composite_driver *to_cdriver(
 		struct usb_gadget_driver *gdrv)
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 00750f7..1d79612 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -310,6 +310,7 @@ struct usb_udc;
 struct usb_gadget_ops {
 	int	(*get_frame)(struct usb_gadget *);
 	int	(*wakeup)(struct usb_gadget *);
+	int	(*set_remote_wakeup)(struct usb_gadget *, int set);
 	int	(*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
 	int	(*vbus_session) (struct usb_gadget *, int is_active);
 	int	(*vbus_draw) (struct usb_gadget *, unsigned mA);
@@ -384,6 +385,8 @@ struct usb_gadget_ops {
  * @connected: True if gadget is connected.
  * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag
  *	indicates that it supports LPM as per the LPM ECN & errata.
+ * @wakeup_capable: True if gadget is capable of sending remote wakeup.
+ * @wakeup_armed: True if gadget is armed by the host for remote wakeup.
  * @irq: the interrupt number for device controller.
  * @id_number: a unique ID number for ensuring that gadget names are distinct
  *
@@ -445,6 +448,8 @@ struct usb_gadget {
 	unsigned			deactivated:1;
 	unsigned			connected:1;
 	unsigned			lpm_capable:1;
+	unsigned			wakeup_capable:1;
+	unsigned			wakeup_armed:1;
 	int				irq;
 	int				id_number;
 };
@@ -601,6 +606,7 @@ static inline int gadget_is_otg(struct usb_gadget *g)
 #if IS_ENABLED(CONFIG_USB_GADGET)
 int usb_gadget_frame_number(struct usb_gadget *gadget);
 int usb_gadget_wakeup(struct usb_gadget *gadget);
+int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set);
 int usb_gadget_set_selfpowered(struct usb_gadget *gadget);
 int usb_gadget_clear_selfpowered(struct usb_gadget *gadget);
 int usb_gadget_vbus_connect(struct usb_gadget *gadget);
@@ -616,6 +622,8 @@ static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
 { return 0; }
 static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
 { return 0; }
+static inline int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set)
+{ return 0; }
 static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
 { return 0; }
 static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
-- 
2.7.4

[PATCH v10 2/5] usb: dwc3: Add remote wakeup handling

[Elson Roy Serrao]

An usb device can initate a remote wakeup and bring the link out of
suspend as dictated by the DEVICE_REMOTE_WAKEUP feature selector.
Add support to handle this packet and set the remote wakeup capability.

Some hosts may take longer time to initiate the resume signaling after
device triggers a remote wakeup. So add async support to the wakeup API
by enabling link status change events.

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
---
 drivers/usb/dwc3/core.h   |  2 ++
 drivers/usb/dwc3/ep0.c    |  7 +++++
 drivers/usb/dwc3/gadget.c | 76 +++++++++++++++++++++++++++++++++++++++++++----
 3 files changed, 79 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b1bd631..416e0ef 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1113,6 +1113,7 @@ struct dwc3_scratchpad_array {
  *	3	- Reserved
  * @dis_metastability_quirk: set to disable metastability quirk.
  * @dis_split_quirk: set to disable split boundary.
+ * @wakeup_configured: set if the device is configured for remote wakeup.
  * @imod_interval: set the interrupt moderation interval in 250ns
  *			increments or 0 to disable.
  * @max_cfg_eps: current max number of IN eps used across all USB configs.
@@ -1331,6 +1332,7 @@ struct dwc3 {
 
 	unsigned		dis_split_quirk:1;
 	unsigned		async_callbacks:1;
+	unsigned		wakeup_configured:1;
 
 	u16			imod_interval;
 
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 61de693..8aa14a5 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -356,6 +356,9 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 				usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
 			if (reg & DWC3_DCTL_INITU2ENA)
 				usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
+		} else {
+			usb_status |= dwc->gadget->wakeup_armed <<
+					USB_DEVICE_REMOTE_WAKEUP;
 		}
 
 		break;
@@ -476,6 +479,10 @@ static int dwc3_ep0_handle_device(struct dwc3 *dwc,
 
 	switch (wValue) {
 	case USB_DEVICE_REMOTE_WAKEUP:
+		if (dwc->wakeup_configured)
+			dwc->gadget->wakeup_armed = set;
+		else
+			ret = -EINVAL;
 		break;
 	/*
 	 * 9.4.1 says only for SS, in AddressState only for
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 07989c6..f37f949 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -258,7 +258,7 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
 	return ret;
 }
 
-static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async);
 
 /**
  * dwc3_send_gadget_ep_cmd - issue an endpoint command
@@ -325,7 +325,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 
 			fallthrough;
 		case DWC3_LINK_STATE_U3:
-			ret = __dwc3_gadget_wakeup(dwc);
+			ret = __dwc3_gadget_wakeup(dwc, false);
 			dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
 					ret);
 			break;
@@ -2269,6 +2269,22 @@ static const struct usb_ep_ops dwc3_gadget_ep_ops = {
 
 /* -------------------------------------------------------------------------- */
 
+static void dwc3_gadget_enable_linksts_evts(struct dwc3 *dwc, bool set)
+{
+	u32 reg;
+
+	if (DWC3_VER_IS_PRIOR(DWC3, 250A))
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DEVTEN);
+	if (set)
+		reg |= DWC3_DEVTEN_ULSTCNGEN;
+	else
+		reg &= ~DWC3_DEVTEN_ULSTCNGEN;
+
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
+}
+
 static int dwc3_gadget_get_frame(struct usb_gadget *g)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
@@ -2276,7 +2292,7 @@ static int dwc3_gadget_get_frame(struct usb_gadget *g)
 	return __dwc3_gadget_get_frame(dwc);
 }
 
-static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
+static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async)
 {
 	int			retries;
 
@@ -2307,9 +2323,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 		return -EINVAL;
 	}
 
+	if (async)
+		dwc3_gadget_enable_linksts_evts(dwc, true);
+
 	ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
 	if (ret < 0) {
 		dev_err(dwc->dev, "failed to put link in Recovery\n");
+		dwc3_gadget_enable_linksts_evts(dwc, false);
 		return ret;
 	}
 
@@ -2321,6 +2341,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 	}
 
+	/*
+	 * Since link status change events are enabled we will receive
+	 * an U0 event when wakeup is successful. So bail out.
+	 */
+	if (async)
+		return 0;
+
 	/* poll until Link State changes to ON */
 	retries = 20000;
 
@@ -2346,13 +2373,36 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
 	unsigned long		flags;
 	int			ret;
 
+	if (!dwc->wakeup_configured) {
+		dev_err(dwc->dev, "remote wakeup not configured\n");
+		return -EINVAL;
+	}
+
 	spin_lock_irqsave(&dwc->lock, flags);
-	ret = __dwc3_gadget_wakeup(dwc);
+	if (!dwc->gadget->wakeup_armed) {
+		dev_err(dwc->dev, "not armed for remote wakeup\n");
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		return -EINVAL;
+	}
+	ret = __dwc3_gadget_wakeup(dwc, true);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
 }
 
+static int dwc3_gadget_set_remote_wakeup(struct usb_gadget *g, int set)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->wakeup_configured = !!set;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
 static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
 		int is_selfpowered)
 {
@@ -2978,6 +3028,7 @@ static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
 static const struct usb_gadget_ops dwc3_gadget_ops = {
 	.get_frame		= dwc3_gadget_get_frame,
 	.wakeup			= dwc3_gadget_wakeup,
+	.set_remote_wakeup	= dwc3_gadget_set_remote_wakeup,
 	.set_selfpowered	= dwc3_gadget_set_selfpowered,
 	.pullup			= dwc3_gadget_pullup,
 	.udc_start		= dwc3_gadget_start,
@@ -3819,6 +3870,8 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 
 	dwc->gadget->speed = USB_SPEED_UNKNOWN;
 	dwc->setup_packet_pending = false;
+	dwc->gadget->wakeup_armed = false;
+	dwc3_gadget_enable_linksts_evts(dwc, false);
 	usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
 
 	if (dwc->ep0state != EP0_SETUP_PHASE) {
@@ -3912,6 +3965,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
 	dwc3_gadget_dctl_write_safe(dwc, reg);
 	dwc->test_mode = false;
+	dwc->gadget->wakeup_armed = false;
+	dwc3_gadget_enable_linksts_evts(dwc, false);
 	dwc3_clear_stall_all_ep(dwc);
 
 	/* Reset device address to zero */
@@ -4064,7 +4119,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	 */
 }
 
-static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
+static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc, unsigned int evtinfo)
 {
 	/*
 	 * TODO take core out of low power mode when that's
@@ -4076,6 +4131,8 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
 		dwc->gadget_driver->resume(dwc->gadget);
 		spin_lock(&dwc->lock);
 	}
+
+	dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK;
 }
 
 static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
@@ -4157,6 +4214,12 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 	}
 
 	switch (next) {
+	case DWC3_LINK_STATE_U0:
+		if (dwc->gadget->wakeup_armed) {
+			dwc3_gadget_enable_linksts_evts(dwc, false);
+			dwc3_resume_gadget(dwc);
+		}
+		break;
 	case DWC3_LINK_STATE_U1:
 		if (dwc->speed == USB_SPEED_SUPER)
 			dwc3_suspend_gadget(dwc);
@@ -4225,7 +4288,7 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		dwc3_gadget_conndone_interrupt(dwc);
 		break;
 	case DWC3_DEVICE_EVENT_WAKEUP:
-		dwc3_gadget_wakeup_interrupt(dwc);
+		dwc3_gadget_wakeup_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_HIBER_REQ:
 		if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation,
@@ -4478,6 +4541,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	dwc->gadget->sg_supported	= true;
 	dwc->gadget->name		= "dwc3-gadget";
 	dwc->gadget->lpm_capable	= !dwc->usb2_gadget_lpm_disable;
+	dwc->gadget->wakeup_capable	= true;
 
 	/*
 	 * FIXME We might be setting max_speed to <SUPER, however versions
-- 
2.7.4

[PATCH v10 3/5] usb: gadget: Add function wakeup support

[Elson Roy Serrao]

USB3.2 spec section 9.2.5.4 quotes that a function may signal that
it wants to exit from Function Suspend by sending a Function
Wake Notification to the host if it is enabled for function
remote wakeup. Add an api in composite layer that can be used
by the function drivers to support this feature. Also expose
a gadget op so that composite layer can trigger a wakeup request
to the UDC driver.

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
---
 drivers/usb/gadget/composite.c | 40 ++++++++++++++++++++++++++++++++++++++++
 include/linux/usb/composite.h  |  6 ++++++
 include/linux/usb/gadget.h     |  1 +
 3 files changed, 47 insertions(+)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c9c983e..2111732 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -492,6 +492,46 @@ int usb_interface_id(struct usb_configuration *config,
 }
 EXPORT_SYMBOL_GPL(usb_interface_id);
 
+/**
+ * usb_func_wakeup - sends function wake notification to the host.
+ * @func: function that sends the remote wakeup notification.
+ *
+ * Applicable to devices operating at enhanced superspeed when usb
+ * functions are put in function suspend state and armed for function
+ * remote wakeup. On completion, function wake notification is sent. If
+ * the device is in low power state it tries to bring the device to active
+ * state before sending the wake notification. Since it is a synchronous
+ * call, caller must take care of not calling it in interrupt context.
+ * For devices operating at lower speeds  returns negative errno.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_func_wakeup(struct usb_function *func)
+{
+	struct usb_gadget	*gadget = func->config->cdev->gadget;
+	int			id;
+
+	if (!gadget->ops->func_wakeup)
+		return -EOPNOTSUPP;
+
+	if (!func->func_wakeup_armed) {
+		ERROR(func->config->cdev, "not armed for func remote wakeup\n");
+		return -EINVAL;
+	}
+
+	for (id = 0; id < MAX_CONFIG_INTERFACES; id++)
+		if (func->config->interface[id] == func)
+			break;
+
+	if (id == MAX_CONFIG_INTERFACES) {
+		ERROR(func->config->cdev, "Invalid function\n");
+		return -EINVAL;
+	}
+
+	return gadget->ops->func_wakeup(gadget, id);
+}
+EXPORT_SYMBOL_GPL(usb_func_wakeup);
+
 static u8 encode_bMaxPower(enum usb_device_speed speed,
 		struct usb_configuration *c)
 {
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index d949e91..a2448e9 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -150,6 +150,9 @@ struct usb_os_desc_table {
  *	GetStatus() request when the recipient is Interface.
  * @func_suspend: callback to be called when
  *	SetFeature(FUNCTION_SUSPEND) is reseived
+ * @func_suspended: Indicates whether the function is in function suspend state.
+ * @func_wakeup_armed: Indicates whether the function is armed by the host for
+ *	wakeup signaling.
  *
  * A single USB function uses one or more interfaces, and should in most
  * cases support operation at both full and high speeds.  Each function is
@@ -220,6 +223,8 @@ struct usb_function {
 	int			(*get_status)(struct usb_function *);
 	int			(*func_suspend)(struct usb_function *,
 						u8 suspend_opt);
+	bool			func_suspended;
+	bool			func_wakeup_armed;
 	/* private: */
 	/* internals */
 	struct list_head		list;
@@ -241,6 +246,7 @@ int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f,
 
 int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
 			struct usb_ep *_ep);
+int usb_func_wakeup(struct usb_function *func);
 
 #define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
 
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 1d79612..75bda078 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -310,6 +310,7 @@ struct usb_udc;
 struct usb_gadget_ops {
 	int	(*get_frame)(struct usb_gadget *);
 	int	(*wakeup)(struct usb_gadget *);
+	int	(*func_wakeup)(struct usb_gadget *gadget, int intf_id);
 	int	(*set_remote_wakeup)(struct usb_gadget *, int set);
 	int	(*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
 	int	(*vbus_session) (struct usb_gadget *, int is_active);
-- 
2.7.4

[PATCH v10 4/5] usb: dwc3: Add function suspend and function wakeup support

[Elson Roy Serrao]

USB host sends function suspend and function resume notifications to
the interface through SET_FEATURE/CLEAR_FEATURE setup packets.
Add support to handle these packets by delegating the requests to
composite layer. Also add support to handle function wake notification
requests to exit from function suspend state.

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
---
 drivers/usb/dwc3/core.h   |  3 +++
 drivers/usb/dwc3/debug.h  |  2 ++
 drivers/usb/dwc3/ep0.c    | 12 ++++--------
 drivers/usb/dwc3/gadget.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 51 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 416e0ef..3412ebb 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -527,6 +527,7 @@
 #define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
 #define DWC3_DGCMD_SET_ENDPOINT_PRIME	0x0d
 #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
+#define DWC3_DGCMD_DEV_NOTIFICATION	0x07
 
 #define DWC3_DGCMD_STATUS(n)		(((n) >> 12) & 0x0F)
 #define DWC3_DGCMD_CMDACT		BIT(10)
@@ -539,6 +540,8 @@
 #define DWC3_DGCMDPAR_TX_FIFO			BIT(5)
 #define DWC3_DGCMDPAR_LOOPBACK_DIS		(0 << 0)
 #define DWC3_DGCMDPAR_LOOPBACK_ENA		BIT(0)
+#define DWC3_DGCMDPAR_DN_FUNC_WAKE		BIT(0)
+#define DWC3_DGCMDPAR_INTF_SEL(n)		((n) << 4)
 
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT		16
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 8bb2c9e..09d7038 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -72,6 +72,8 @@ dwc3_gadget_generic_cmd_string(u8 cmd)
 		return "Set Endpoint Prime";
 	case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK:
 		return "Run SoC Bus Loopback Test";
+	case DWC3_DGCMD_DEV_NOTIFICATION:
+		return "Device Notification";
 	default:
 		return "UNKNOWN";
 	}
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 8aa14a5..953b752 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -30,6 +30,8 @@
 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		struct dwc3_ep *dep, struct dwc3_request *req);
+static int dwc3_ep0_delegate_req(struct dwc3 *dwc,
+				 struct usb_ctrlrequest *ctrl);
 
 static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
 		dma_addr_t buf_dma, u32 len, u32 type, bool chain)
@@ -368,7 +370,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 		 * Function Remote Wake Capable	D0
 		 * Function Remote Wakeup	D1
 		 */
-		break;
+		return dwc3_ep0_delegate_req(dwc, ctrl);
 
 	case USB_RECIP_ENDPOINT:
 		dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
@@ -517,13 +519,7 @@ static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
 
 	switch (wValue) {
 	case USB_INTRF_FUNC_SUSPEND:
-		/*
-		 * REVISIT: Ideally we would enable some low power mode here,
-		 * however it's unclear what we should be doing here.
-		 *
-		 * For now, we're not doing anything, just making sure we return
-		 * 0 so USB Command Verifier tests pass without any errors.
-		 */
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f37f949..b72d5c8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2391,6 +2391,47 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
 	return ret;
 }
 
+static void dwc3_resume_gadget(struct dwc3 *dwc);
+
+static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
+{
+	struct  dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+	int			ret;
+	int			link_state;
+
+	if (!dwc->wakeup_configured) {
+		dev_err(dwc->dev, "remote wakeup not configured\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	/*
+	 * If the link is in U3, signal for remote wakeup and wait for the
+	 * link to transition to U0 before sending device notification.
+	 */
+	link_state = dwc3_gadget_get_link_state(dwc);
+	if (link_state == DWC3_LINK_STATE_U3) {
+		ret = __dwc3_gadget_wakeup(dwc, false);
+		if (ret) {
+			spin_unlock_irqrestore(&dwc->lock, flags);
+			return -EINVAL;
+		}
+		dwc3_resume_gadget(dwc);
+		dwc->link_state = DWC3_LINK_STATE_U0;
+	}
+
+	ret = dwc3_send_gadget_generic_command(dwc, DWC3_DGCMD_DEV_NOTIFICATION,
+					       DWC3_DGCMDPAR_DN_FUNC_WAKE |
+					       DWC3_DGCMDPAR_INTF_SEL(intf_id));
+	if (ret)
+		dev_err(dwc->dev, "function remote wakeup failed, ret:%d\n", ret);
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
 static int dwc3_gadget_set_remote_wakeup(struct usb_gadget *g, int set)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
@@ -3028,6 +3069,7 @@ static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
 static const struct usb_gadget_ops dwc3_gadget_ops = {
 	.get_frame		= dwc3_gadget_get_frame,
 	.wakeup			= dwc3_gadget_wakeup,
+	.func_wakeup		= dwc3_gadget_func_wakeup,
 	.set_remote_wakeup	= dwc3_gadget_set_remote_wakeup,
 	.set_selfpowered	= dwc3_gadget_set_selfpowered,
 	.pullup			= dwc3_gadget_pullup,
-- 
2.7.4

[PATCH v10 5/5] usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

[Elson Roy Serrao]

When host sends a suspend notification to the device, handle
the suspend callbacks in the function driver. Enhanced super
speed devices can support function suspend feature to put the
function in suspend state. Handle function suspend callback.

Depending on the remote wakeup capability the device can either
trigger a remote wakeup or wait for the host initiated resume to
start data transfer again.

Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
---
 drivers/usb/gadget/function/f_ecm.c   | 77 +++++++++++++++++++++++++++++++++++
 drivers/usb/gadget/function/u_ether.c | 63 ++++++++++++++++++++++++++++
 drivers/usb/gadget/function/u_ether.h |  4 ++
 3 files changed, 144 insertions(+)

diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
index a7ab30e..fea07ab 100644
--- a/drivers/usb/gadget/function/f_ecm.c
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -633,6 +633,8 @@ static void ecm_disable(struct usb_function *f)
 
 	usb_ep_disable(ecm->notify);
 	ecm->notify->desc = NULL;
+	f->func_suspended = false;
+	f->func_wakeup_armed = false;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -885,6 +887,77 @@ static struct usb_function_instance *ecm_alloc_inst(void)
 	return &opts->func_inst;
 }
 
+static void ecm_suspend(struct usb_function *f)
+{
+	struct f_ecm *ecm = func_to_ecm(f);
+	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
+
+	if (f->func_suspended) {
+		DBG(cdev, "Function already suspended\n");
+		return;
+	}
+
+	DBG(cdev, "ECM Suspend\n");
+
+	gether_suspend(&ecm->port);
+}
+
+static void ecm_resume(struct usb_function *f)
+{
+	struct f_ecm *ecm = func_to_ecm(f);
+	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
+
+	/*
+	 * If the function is in USB3 Function Suspend state, resume is
+	 * canceled. In this case resume is done by a Function Resume request.
+	 */
+	if (f->func_suspended)
+		return;
+
+	DBG(cdev, "ECM Resume\n");
+
+	gether_resume(&ecm->port);
+}
+
+static int ecm_get_status(struct usb_function *f)
+{
+	struct usb_configuration *c = f->config;
+
+	/* D0 and D1 bit set to 0 if device is not wakeup capable */
+	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
+		return 0;
+
+	return (f->func_wakeup_armed ? USB_INTRF_STAT_FUNC_RW : 0) |
+		USB_INTRF_STAT_FUNC_RW_CAP;
+}
+
+static int ecm_func_suspend(struct usb_function *f, u8 options)
+{
+	struct usb_configuration *c = f->config;
+
+	DBG(c->cdev, "func susp %u cmd\n", options);
+
+	/* Respond with negative errno if request is not supported */
+	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
+		return -EINVAL;
+
+	f->func_wakeup_armed = !!(options & (USB_INTRF_FUNC_SUSPEND_RW >> 8));
+
+	if (options & (USB_INTRF_FUNC_SUSPEND_LP >> 8)) {
+		if (!f->func_suspended) {
+			ecm_suspend(f);
+			f->func_suspended = true;
+		}
+	} else {
+		if (f->func_suspended) {
+			f->func_suspended = false;
+			ecm_resume(f);
+		}
+	}
+
+	return 0;
+}
+
 static void ecm_free(struct usb_function *f)
 {
 	struct f_ecm *ecm;
@@ -952,6 +1025,10 @@ static struct usb_function *ecm_alloc(struct usb_function_instance *fi)
 	ecm->port.func.setup = ecm_setup;
 	ecm->port.func.disable = ecm_disable;
 	ecm->port.func.free_func = ecm_free;
+	ecm->port.func.suspend = ecm_suspend;
+	ecm->port.func.get_status = ecm_get_status;
+	ecm->port.func.func_suspend = ecm_func_suspend;
+	ecm->port.func.resume = ecm_resume;
 
 	return &ecm->port.func;
 }
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index f259975..8eba018 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -437,6 +437,20 @@ static inline int is_promisc(u16 cdc_filter)
 	return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
 }
 
+static int ether_wakeup_host(struct gether *port)
+{
+	int			ret;
+	struct usb_function	*func = &port->func;
+	struct usb_gadget	*gadget = func->config->cdev->gadget;
+
+	if (func->func_suspended)
+		ret = usb_func_wakeup(func);
+	else
+		ret = usb_gadget_wakeup(gadget);
+
+	return ret;
+}
+
 static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 					struct net_device *net)
 {
@@ -456,6 +470,15 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 		in = NULL;
 		cdc_filter = 0;
 	}
+
+	if (dev->port_usb->is_suspend) {
+		DBG(dev, "Port suspended. Triggering wakeup\n");
+		netif_stop_queue(net);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		ether_wakeup_host(dev->port_usb);
+		return NETDEV_TX_BUSY;
+	}
+
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	if (!in) {
@@ -1014,6 +1037,45 @@ int gether_set_ifname(struct net_device *net, const char *name, int len)
 }
 EXPORT_SYMBOL_GPL(gether_set_ifname);
 
+void gether_suspend(struct gether *link)
+{
+	struct eth_dev *dev = link->ioport;
+	unsigned long flags;
+
+	if (!dev)
+		return;
+
+	if (atomic_read(&dev->tx_qlen)) {
+		/*
+		 * There is a transfer in progress. So we trigger a remote
+		 * wakeup to inform the host.
+		 */
+		ether_wakeup_host(dev->port_usb);
+		return;
+	}
+	spin_lock_irqsave(&dev->lock, flags);
+	link->is_suspend = true;
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+EXPORT_SYMBOL_GPL(gether_suspend);
+
+void gether_resume(struct gether *link)
+{
+	struct eth_dev *dev = link->ioport;
+	unsigned long flags;
+
+	if (!dev)
+		return;
+
+	if (netif_queue_stopped(dev->net))
+		netif_start_queue(dev->net);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	link->is_suspend = false;
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+EXPORT_SYMBOL_GPL(gether_resume);
+
 /*
  * gether_cleanup - remove Ethernet-over-USB device
  * Context: may sleep
@@ -1176,6 +1238,7 @@ void gether_disconnect(struct gether *link)
 
 	spin_lock(&dev->lock);
 	dev->port_usb = NULL;
+	link->is_suspend = false;
 	spin_unlock(&dev->lock);
 }
 EXPORT_SYMBOL_GPL(gether_disconnect);
diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h
index 4014454..851ee10 100644
--- a/drivers/usb/gadget/function/u_ether.h
+++ b/drivers/usb/gadget/function/u_ether.h
@@ -79,6 +79,7 @@ struct gether {
 	/* called on network open/close */
 	void				(*open)(struct gether *);
 	void				(*close)(struct gether *);
+	bool				is_suspend;
 };
 
 #define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
@@ -258,6 +259,9 @@ int gether_set_ifname(struct net_device *net, const char *name, int len);
 
 void gether_cleanup(struct eth_dev *dev);
 
+void gether_suspend(struct gether *link);
+void gether_resume(struct gether *link);
+
 /* connect/disconnect is handled by individual functions */
 struct net_device *gether_connect(struct gether *);
 void gether_disconnect(struct gether *);
-- 
2.7.4

Re: [PATCH v10 5/5] usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

[Thinh Nguyen]

On Wed, Mar 15, 2023, Elson Roy Serrao wrote:
> When host sends a suspend notification to the device, handle
> the suspend callbacks in the function driver. Enhanced super
> speed devices can support function suspend feature to put the
> function in suspend state. Handle function suspend callback.
> 
> Depending on the remote wakeup capability the device can either
> trigger a remote wakeup or wait for the host initiated resume to
> start data transfer again.
> 
> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
> ---
>  drivers/usb/gadget/function/f_ecm.c   | 77 +++++++++++++++++++++++++++++++++++
>  drivers/usb/gadget/function/u_ether.c | 63 ++++++++++++++++++++++++++++
>  drivers/usb/gadget/function/u_ether.h |  4 ++
>  3 files changed, 144 insertions(+)
> 
> diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
> index a7ab30e..fea07ab 100644
> --- a/drivers/usb/gadget/function/f_ecm.c
> +++ b/drivers/usb/gadget/function/f_ecm.c
> @@ -633,6 +633,8 @@ static void ecm_disable(struct usb_function *f)
>  
>  	usb_ep_disable(ecm->notify);
>  	ecm->notify->desc = NULL;
> +	f->func_suspended = false;
> +	f->func_wakeup_armed = false;
>  }
>  
>  /*-------------------------------------------------------------------------*/
> @@ -885,6 +887,77 @@ static struct usb_function_instance *ecm_alloc_inst(void)
>  	return &opts->func_inst;
>  }
>  
> +static void ecm_suspend(struct usb_function *f)
> +{
> +	struct f_ecm *ecm = func_to_ecm(f);
> +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
> +
> +	if (f->func_suspended) {
> +		DBG(cdev, "Function already suspended\n");
> +		return;
> +	}
> +
> +	DBG(cdev, "ECM Suspend\n");
> +
> +	gether_suspend(&ecm->port);
> +}
> +
> +static void ecm_resume(struct usb_function *f)
> +{
> +	struct f_ecm *ecm = func_to_ecm(f);
> +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
> +
> +	/*
> +	 * If the function is in USB3 Function Suspend state, resume is
> +	 * canceled. In this case resume is done by a Function Resume request.
> +	 */
> +	if (f->func_suspended)
> +		return;
> +
> +	DBG(cdev, "ECM Resume\n");
> +
> +	gether_resume(&ecm->port);
> +}
> +
> +static int ecm_get_status(struct usb_function *f)
> +{
> +	struct usb_configuration *c = f->config;
> +
> +	/* D0 and D1 bit set to 0 if device is not wakeup capable */
> +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> +		return 0;
> +
> +	return (f->func_wakeup_armed ? USB_INTRF_STAT_FUNC_RW : 0) |
> +		USB_INTRF_STAT_FUNC_RW_CAP;
> +}
> +
> +static int ecm_func_suspend(struct usb_function *f, u8 options)
> +{
> +	struct usb_configuration *c = f->config;
> +
> +	DBG(c->cdev, "func susp %u cmd\n", options);
> +
> +	/* Respond with negative errno if request is not supported */
> +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> +		return -EINVAL;

We only need to return early if the host tries to enable remote wake
while the device isn't capable of it:

	wakeup_sel = !!(options & (USB_INTRF_FUNC_SUSPEND_RW >> 8));
	if (wakeup_sel && !(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
		return -EINVAL;

	f->func_wakeup_armed = wakeup_sel;

BR,
Thinh

> +
> +	f->func_wakeup_armed = !!(options & (USB_INTRF_FUNC_SUSPEND_RW >> 8));
> +
> +	if (options & (USB_INTRF_FUNC_SUSPEND_LP >> 8)) {
> +		if (!f->func_suspended) {
> +			ecm_suspend(f);
> +			f->func_suspended = true;
> +		}
> +	} else {
> +		if (f->func_suspended) {
> +			f->func_suspended = false;
> +			ecm_resume(f);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
 

Re: [PATCH v10 5/5] usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

[Thinh Nguyen]

On Wed, Mar 15, 2023, Thinh Nguyen wrote:
> On Wed, Mar 15, 2023, Elson Roy Serrao wrote:
> > When host sends a suspend notification to the device, handle
> > the suspend callbacks in the function driver. Enhanced super
> > speed devices can support function suspend feature to put the
> > function in suspend state. Handle function suspend callback.
> > 
> > Depending on the remote wakeup capability the device can either
> > trigger a remote wakeup or wait for the host initiated resume to
> > start data transfer again.
> > 
> > Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
> > ---
> >  drivers/usb/gadget/function/f_ecm.c   | 77 +++++++++++++++++++++++++++++++++++
> >  drivers/usb/gadget/function/u_ether.c | 63 ++++++++++++++++++++++++++++
> >  drivers/usb/gadget/function/u_ether.h |  4 ++
> >  3 files changed, 144 insertions(+)
> > 
> > diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
> > index a7ab30e..fea07ab 100644
> > --- a/drivers/usb/gadget/function/f_ecm.c
> > +++ b/drivers/usb/gadget/function/f_ecm.c
> > @@ -633,6 +633,8 @@ static void ecm_disable(struct usb_function *f)
> >  
> >  	usb_ep_disable(ecm->notify);
> >  	ecm->notify->desc = NULL;
> > +	f->func_suspended = false;
> > +	f->func_wakeup_armed = false;
> >  }
> >  
> >  /*-------------------------------------------------------------------------*/
> > @@ -885,6 +887,77 @@ static struct usb_function_instance *ecm_alloc_inst(void)
> >  	return &opts->func_inst;
> >  }
> >  
> > +static void ecm_suspend(struct usb_function *f)
> > +{
> > +	struct f_ecm *ecm = func_to_ecm(f);
> > +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
> > +
> > +	if (f->func_suspended) {
> > +		DBG(cdev, "Function already suspended\n");
> > +		return;
> > +	}
> > +
> > +	DBG(cdev, "ECM Suspend\n");
> > +
> > +	gether_suspend(&ecm->port);
> > +}
> > +
> > +static void ecm_resume(struct usb_function *f)
> > +{
> > +	struct f_ecm *ecm = func_to_ecm(f);
> > +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
> > +
> > +	/*
> > +	 * If the function is in USB3 Function Suspend state, resume is
> > +	 * canceled. In this case resume is done by a Function Resume request.
> > +	 */
> > +	if (f->func_suspended)
> > +		return;
> > +
> > +	DBG(cdev, "ECM Resume\n");
> > +
> > +	gether_resume(&ecm->port);
> > +}
> > +
> > +static int ecm_get_status(struct usb_function *f)
> > +{
> > +	struct usb_configuration *c = f->config;
> > +
> > +	/* D0 and D1 bit set to 0 if device is not wakeup capable */
> > +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> > +		return 0;
> > +
> > +	return (f->func_wakeup_armed ? USB_INTRF_STAT_FUNC_RW : 0) |
> > +		USB_INTRF_STAT_FUNC_RW_CAP;
> > +}
> > +
> > +static int ecm_func_suspend(struct usb_function *f, u8 options)
> > +{
> > +	struct usb_configuration *c = f->config;
> > +
> > +	DBG(c->cdev, "func susp %u cmd\n", options);
> > +
> > +	/* Respond with negative errno if request is not supported */
> > +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> > +		return -EINVAL;
> 
> We only need to return early if the host tries to enable remote wake
> while the device isn't capable of it:
> 
> 	wakeup_sel = !!(options & (USB_INTRF_FUNC_SUSPEND_RW >> 8));
> 	if (wakeup_sel && !(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> 		return -EINVAL;
> 
> 	f->func_wakeup_armed = wakeup_sel;
> 

Also, I notice that we can't differentiate between ClearFeature() and
SetFeature() in f->func_suspend(). Perhaps we should handle arming the
remote wakeup in the composite layer so we can set/clear the remote
wake. It's common across multiple devices. It's probably better to be
there.

Thanks,
Thinh

Re: [PATCH v10 5/5] usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

[Elson Serrao]

On 3/15/2023 2:15 PM, Thinh Nguyen wrote:
> On Wed, Mar 15, 2023, Thinh Nguyen wrote:
>> On Wed, Mar 15, 2023, Elson Roy Serrao wrote:
>>> When host sends a suspend notification to the device, handle
>>> the suspend callbacks in the function driver. Enhanced super
>>> speed devices can support function suspend feature to put the
>>> function in suspend state. Handle function suspend callback.
>>>
>>> Depending on the remote wakeup capability the device can either
>>> trigger a remote wakeup or wait for the host initiated resume to
>>> start data transfer again.
>>>
>>> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
>>> ---
>>>   drivers/usb/gadget/function/f_ecm.c   | 77 +++++++++++++++++++++++++++++++++++
>>>   drivers/usb/gadget/function/u_ether.c | 63 ++++++++++++++++++++++++++++
>>>   drivers/usb/gadget/function/u_ether.h |  4 ++
>>>   3 files changed, 144 insertions(+)
>>>
>>> diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
>>> index a7ab30e..fea07ab 100644
>>> --- a/drivers/usb/gadget/function/f_ecm.c
>>> +++ b/drivers/usb/gadget/function/f_ecm.c
>>> @@ -633,6 +633,8 @@ static void ecm_disable(struct usb_function *f)
>>>   
>>>   	usb_ep_disable(ecm->notify);
>>>   	ecm->notify->desc = NULL;
>>> +	f->func_suspended = false;
>>> +	f->func_wakeup_armed = false;
>>>   }
>>>   
>>>   /*-------------------------------------------------------------------------*/
>>> @@ -885,6 +887,77 @@ static struct usb_function_instance *ecm_alloc_inst(void)
>>>   	return &opts->func_inst;
>>>   }
>>>   
>>> +static void ecm_suspend(struct usb_function *f)
>>> +{
>>> +	struct f_ecm *ecm = func_to_ecm(f);
>>> +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
>>> +
>>> +	if (f->func_suspended) {
>>> +		DBG(cdev, "Function already suspended\n");
>>> +		return;
>>> +	}
>>> +
>>> +	DBG(cdev, "ECM Suspend\n");
>>> +
>>> +	gether_suspend(&ecm->port);
>>> +}
>>> +
>>> +static void ecm_resume(struct usb_function *f)
>>> +{
>>> +	struct f_ecm *ecm = func_to_ecm(f);
>>> +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
>>> +
>>> +	/*
>>> +	 * If the function is in USB3 Function Suspend state, resume is
>>> +	 * canceled. In this case resume is done by a Function Resume request.
>>> +	 */
>>> +	if (f->func_suspended)
>>> +		return;
>>> +
>>> +	DBG(cdev, "ECM Resume\n");
>>> +
>>> +	gether_resume(&ecm->port);
>>> +}
>>> +
>>> +static int ecm_get_status(struct usb_function *f)
>>> +{
>>> +	struct usb_configuration *c = f->config;
>>> +
>>> +	/* D0 and D1 bit set to 0 if device is not wakeup capable */
>>> +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
>>> +		return 0;
>>> +
>>> +	return (f->func_wakeup_armed ? USB_INTRF_STAT_FUNC_RW : 0) |
>>> +		USB_INTRF_STAT_FUNC_RW_CAP;
>>> +}
>>> +
>>> +static int ecm_func_suspend(struct usb_function *f, u8 options)
>>> +{
>>> +	struct usb_configuration *c = f->config;
>>> +
>>> +	DBG(c->cdev, "func susp %u cmd\n", options);
>>> +
>>> +	/* Respond with negative errno if request is not supported */
>>> +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
>>> +		return -EINVAL;
>>
>> We only need to return early if the host tries to enable remote wake
>> while the device isn't capable of it:
>>
>> 	wakeup_sel = !!(options & (USB_INTRF_FUNC_SUSPEND_RW >> 8));
>> 	if (wakeup_sel && !(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
>> 		return -EINVAL;
>>
>> 	f->func_wakeup_armed = wakeup_sel;
>>
> 
> Also, I notice that we can't differentiate between ClearFeature() and
> SetFeature() in f->func_suspend(). Perhaps we should handle arming the
> remote wakeup in the composite layer so we can set/clear the remote
> wake. It's common across multiple devices. It's probably better to be
> there.
> 
> Thanks,
> Thinh

Yeah agree with that. We check for function_wakeup_armed flag before 
sending remote wakeup in composite.c. So it makes more sense
to set/reset this flag in composite.c itself. I will make that change
and upload v12 along with fixing 'value = 0' removal that we discussed
earlier. Please let me know if that is fine

Thanks
Elson

Re: [PATCH v10 5/5] usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

[Thinh Nguyen]

On Wed, Mar 15, 2023, Elson Serrao wrote:
> 
> On 3/15/2023 2:15 PM, Thinh Nguyen wrote:
> > On Wed, Mar 15, 2023, Thinh Nguyen wrote:
> > > On Wed, Mar 15, 2023, Elson Roy Serrao wrote:
> > > > When host sends a suspend notification to the device, handle
> > > > the suspend callbacks in the function driver. Enhanced super
> > > > speed devices can support function suspend feature to put the
> > > > function in suspend state. Handle function suspend callback.
> > > > 
> > > > Depending on the remote wakeup capability the device can either
> > > > trigger a remote wakeup or wait for the host initiated resume to
> > > > start data transfer again.
> > > > 
> > > > Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
> > > > ---
> > > >   drivers/usb/gadget/function/f_ecm.c   | 77 +++++++++++++++++++++++++++++++++++
> > > >   drivers/usb/gadget/function/u_ether.c | 63 ++++++++++++++++++++++++++++
> > > >   drivers/usb/gadget/function/u_ether.h |  4 ++
> > > >   3 files changed, 144 insertions(+)
> > > > 
> > > > diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
> > > > index a7ab30e..fea07ab 100644
> > > > --- a/drivers/usb/gadget/function/f_ecm.c
> > > > +++ b/drivers/usb/gadget/function/f_ecm.c
> > > > @@ -633,6 +633,8 @@ static void ecm_disable(struct usb_function *f)
> > > >   	usb_ep_disable(ecm->notify);
> > > >   	ecm->notify->desc = NULL;
> > > > +	f->func_suspended = false;
> > > > +	f->func_wakeup_armed = false;
> > > >   }
> > > >   /*-------------------------------------------------------------------------*/
> > > > @@ -885,6 +887,77 @@ static struct usb_function_instance *ecm_alloc_inst(void)
> > > >   	return &opts->func_inst;
> > > >   }
> > > > +static void ecm_suspend(struct usb_function *f)
> > > > +{
> > > > +	struct f_ecm *ecm = func_to_ecm(f);
> > > > +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
> > > > +
> > > > +	if (f->func_suspended) {
> > > > +		DBG(cdev, "Function already suspended\n");
> > > > +		return;
> > > > +	}
> > > > +
> > > > +	DBG(cdev, "ECM Suspend\n");
> > > > +
> > > > +	gether_suspend(&ecm->port);
> > > > +}
> > > > +
> > > > +static void ecm_resume(struct usb_function *f)
> > > > +{
> > > > +	struct f_ecm *ecm = func_to_ecm(f);
> > > > +	struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
> > > > +
> > > > +	/*
> > > > +	 * If the function is in USB3 Function Suspend state, resume is
> > > > +	 * canceled. In this case resume is done by a Function Resume request.
> > > > +	 */
> > > > +	if (f->func_suspended)
> > > > +		return;
> > > > +
> > > > +	DBG(cdev, "ECM Resume\n");
> > > > +
> > > > +	gether_resume(&ecm->port);
> > > > +}
> > > > +
> > > > +static int ecm_get_status(struct usb_function *f)
> > > > +{
> > > > +	struct usb_configuration *c = f->config;
> > > > +
> > > > +	/* D0 and D1 bit set to 0 if device is not wakeup capable */
> > > > +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> > > > +		return 0;
> > > > +
> > > > +	return (f->func_wakeup_armed ? USB_INTRF_STAT_FUNC_RW : 0) |
> > > > +		USB_INTRF_STAT_FUNC_RW_CAP;
> > > > +}
> > > > +
> > > > +static int ecm_func_suspend(struct usb_function *f, u8 options)
> > > > +{
> > > > +	struct usb_configuration *c = f->config;
> > > > +
> > > > +	DBG(c->cdev, "func susp %u cmd\n", options);
> > > > +
> > > > +	/* Respond with negative errno if request is not supported */
> > > > +	if (!(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> > > > +		return -EINVAL;
> > > 
> > > We only need to return early if the host tries to enable remote wake
> > > while the device isn't capable of it:
> > > 
> > > 	wakeup_sel = !!(options & (USB_INTRF_FUNC_SUSPEND_RW >> 8));
> > > 	if (wakeup_sel && !(USB_CONFIG_ATT_WAKEUP & c->bmAttributes))
> > > 		return -EINVAL;
> > > 
> > > 	f->func_wakeup_armed = wakeup_sel;
> > > 
> > 
> > Also, I notice that we can't differentiate between ClearFeature() and
> > SetFeature() in f->func_suspend(). Perhaps we should handle arming the
> > remote wakeup in the composite layer so we can set/clear the remote
> > wake. It's common across multiple devices. It's probably better to be
> > there.
> > 
> > Thanks,
> > Thinh
> 
> Yeah agree with that. We check for function_wakeup_armed flag before sending
> remote wakeup in composite.c. So it makes more sense
> to set/reset this flag in composite.c itself. I will make that change
> and upload v12 along with fixing 'value = 0' removal that we discussed
> earlier. Please let me know if that is fine
> 

Since we don't go through the func_suspend() anymore, let's keep it as
is for now. If you're in composite.c, then you can skip doing
func_suspend() if remote_wake is not supported when host requested.

Thanks,
Thinh