[PATCH 0/2] Correct gpio-ir-recv wakeup capability

[PATCH 0/2] Correct gpio-ir-recv wakeup capability

[Florian Fainelli]

This small patch series fixes the gpio-ir-recv binding and driver to
first indicate that it can be a wake-up source for the system, and
second actually make that happen.

Florian Fainelli (2):
  dt-bindings: media: gpio-ir-receiver: Document wakeup-souce property
  media: rc: gpio-ir-recv: Fix support for wake-up

 Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml | 3 +++
 drivers/media/rc/gpio-ir-recv.c                               | 2 ++
 2 files changed, 5 insertions(+)

-- 
2.34.1

[PATCH 1/2] dt-bindings: media: gpio-ir-receiver: Document wakeup-souce property

[Florian Fainelli]

The GPIO IR receiver can be used as a wake-up source for the system,
document that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
index 61072745b983..7e76838388cd 100644
--- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
+++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
@@ -23,6 +23,9 @@ properties:
     description: autosuspend delay time in milliseconds
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  wakeup-source:
+     description: IR receiver can wake-up the system.
+
 required:
   - compatible
   - gpios
-- 
2.34.1

[PATCH 2/2] media: rc: gpio-ir-recv: Fix support for wake-up

[Florian Fainelli]

The driver was intended from the start to be a wake-up source for the
system, however due to the absence of a suitable call to
device_set_wakeup_capable(), the device_may_wakeup() call used to decide
whether to enable the GPIO interrupt as a wake-up source would never
happen. Lookup the DT standard "wakeup-source" property and call
device_init_wakeup() to ensure the device is flagged as being wakeup
capable.

Reported-by: Matthew Lear <matthew.lear@broadcom.com>
Fixes: fd0f6851eb46 ("[media] rc: Add support for GPIO based IR Receiver driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/media/rc/gpio-ir-recv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
index 8dbe780dae4e..41ef8cdba28c 100644
--- a/drivers/media/rc/gpio-ir-recv.c
+++ b/drivers/media/rc/gpio-ir-recv.c
@@ -103,6 +103,8 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
 		rcdev->map_name = RC_MAP_EMPTY;
 
 	gpio_dev->rcdev = rcdev;
+	if (of_property_read_bool(np, "wakeup-source"))
+		device_init_wakeup(dev, true);
 
 	rc = devm_rc_register_device(dev, rcdev);
 	if (rc < 0) {
-- 
2.34.1

Re: [PATCH 1/2] dt-bindings: media: gpio-ir-receiver: Document wakeup-souce property

[Rob Herring]

On Fri, 24 Mar 2023 10:02:13 -0700, Florian Fainelli wrote:
> The GPIO IR receiver can be used as a wake-up source for the system,
> document that.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml:27:6: [warning] wrong indentation: expected 4 but found 5 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230324170214.3470675-2-f.fainelli@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.