* [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars
@ 2023-07-12 16:03 Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 1/4] selftests: mptcp: set all env vars as local ones Matthieu Baerts
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Matthieu Baerts @ 2023-07-12 16:03 UTC (permalink / raw)
To: mptcp, Mat Martineau, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan
Cc: Geliang Tang, netdev, linux-kselftest, linux-kernel, Matthieu Baerts
In this series, Geliang did some refactoring in the mptcp_join.sh file.
Patch 1 reduces the scope of some global env vars, only used by some
tests: easier to deal with.
Patch 2 uses a dedicated env var for fastclose case instead of re-using
addr_nr_ns2 with embedded info, clearer.
Patch 3 is similar but for the fullmesh case.
Patch 4 moves a positional but optional argument of run_tests() to an
env var like it has already been done with the other args, cleaner.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
---
Geliang Tang (4):
selftests: mptcp: set all env vars as local ones
selftests: mptcp: add fastclose env var
selftests: mptcp: add fullmesh env var
selftests: mptcp: add speed env var
tools/testing/selftests/net/mptcp/mptcp_join.sh | 271 +++++++++++++-----------
1 file changed, 151 insertions(+), 120 deletions(-)
---
base-commit: e0f0a5db5f8c413cbbf48607f711c2a21023ee66
change-id: 20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-ad964224bc2a
Best regards,
--
Matthieu Baerts <matthieu.baerts@tessares.net>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH net-next 1/4] selftests: mptcp: set all env vars as local ones
2023-07-12 16:03 [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars Matthieu Baerts
@ 2023-07-12 16:03 ` Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 2/4] selftests: mptcp: add fastclose env var Matthieu Baerts
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Matthieu Baerts @ 2023-07-12 16:03 UTC (permalink / raw)
To: mptcp, Mat Martineau, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan
Cc: Geliang Tang, netdev, linux-kselftest, linux-kernel, Matthieu Baerts
From: Geliang Tang <geliang.tang@suse.com>
It would be better to move the declaration of all the env variables to
do_transfer(), run_tests(), or pm_nl_set_endpoint() as local variables,
instead of exporting them globally at the beginning of the file.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index e6c9d5451c5b..b0aaeead56c4 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -49,11 +49,12 @@ TEST_COUNT=0
TEST_NAME=""
nr_blank=40
-export FAILING_LINKS=""
-export test_linkfail=0
-export addr_nr_ns1=0
-export addr_nr_ns2=0
-export sflags=""
+# These var are used only in some tests, make sure they are not already set
+unset FAILING_LINKS
+unset test_linkfail
+unset addr_nr_ns1
+unset addr_nr_ns2
+unset sflags
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
# (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -100,7 +101,6 @@ init_partial()
stats_dumped=0
check_invert=0
validate_checksum=$checksum
- FAILING_LINKS=""
# ns1 ns2
# ns1eth1 ns2eth1
@@ -828,6 +828,10 @@ pm_nl_set_endpoint()
local connector_ns="$2"
local connect_addr="$3"
+ local addr_nr_ns1=${addr_nr_ns1:-0}
+ local addr_nr_ns2=${addr_nr_ns2:-0}
+ local sflags=${sflags:-""}
+
# let the mptcp subflow be established in background before
# do endpoint manipulation
if [ $addr_nr_ns1 != "0" ] || [ $addr_nr_ns2 != "0" ]; then
@@ -979,6 +983,7 @@ do_transfer()
local port=$((10000 + TEST_COUNT - 1))
local cappid
+ local FAILING_LINKS=${FAILING_LINKS:-""}
:> "$cout"
:> "$sout"
@@ -1158,6 +1163,7 @@ run_tests()
local speed="${4:-fast}"
local size
+ local test_linkfail=${test_linkfail:-0}
# The values above 2 are reused to make test files
# with the given sizes (KB)
--
2.40.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH net-next 2/4] selftests: mptcp: add fastclose env var
2023-07-12 16:03 [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 1/4] selftests: mptcp: set all env vars as local ones Matthieu Baerts
@ 2023-07-12 16:03 ` Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 3/4] selftests: mptcp: add fullmesh " Matthieu Baerts
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Matthieu Baerts @ 2023-07-12 16:03 UTC (permalink / raw)
To: mptcp, Mat Martineau, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan
Cc: Geliang Tang, netdev, linux-kselftest, linux-kernel, Matthieu Baerts
From: Geliang Tang <geliang.tang@suse.com>
Use a new env var fastclose instead of passing fastclose to addr_nr_ns2.
It can be set with 'server' or 'client':
addr_nr_ns2=fastclose_client \
run_tests $ns1 $ns2 10.0.1.1
->
fastclose=client \
run_tests $ns1 $ns2 10.0.1.1.
With this change, the fullmesh flag setting code can be moved into
pm_nl_set_endpoint() from do_transfer().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index b0aaeead56c4..3e8c560938f2 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -55,6 +55,7 @@ unset test_linkfail
unset addr_nr_ns1
unset addr_nr_ns2
unset sflags
+unset fastclose
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
# (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -832,6 +833,12 @@ pm_nl_set_endpoint()
local addr_nr_ns2=${addr_nr_ns2:-0}
local sflags=${sflags:-""}
+ local flags="subflow"
+ if [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then
+ flags="${flags},fullmesh"
+ addr_nr_ns2=${addr_nr_ns2:9}
+ fi
+
# let the mptcp subflow be established in background before
# do endpoint manipulation
if [ $addr_nr_ns1 != "0" ] || [ $addr_nr_ns2 != "0" ]; then
@@ -984,6 +991,7 @@ do_transfer()
local port=$((10000 + TEST_COUNT - 1))
local cappid
local FAILING_LINKS=${FAILING_LINKS:-""}
+ local fastclose=${fastclose:-""}
:> "$cout"
:> "$sout"
@@ -1020,11 +1028,10 @@ do_transfer()
extra_args="-r ${speed:6}"
fi
- local flags="subflow"
local extra_cl_args=""
local extra_srv_args=""
local trunc_size=""
- if [[ "${addr_nr_ns2}" = "fastclose_"* ]]; then
+ if [ -n "${fastclose}" ]; then
if [ ${test_linkfail} -le 1 ]; then
echo "fastclose tests need test_linkfail argument"
fail_test
@@ -1033,7 +1040,7 @@ do_transfer()
# disconnect
trunc_size=${test_linkfail}
- local side=${addr_nr_ns2:10}
+ local side=${fastclose}
if [ ${side} = "client" ]; then
extra_cl_args="-f ${test_linkfail}"
@@ -1046,10 +1053,6 @@ do_transfer()
fail_test
return 1
fi
- addr_nr_ns2=0
- elif [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then
- flags="${flags},fullmesh"
- addr_nr_ns2=${addr_nr_ns2:9}
fi
extra_srv_args="$extra_args $extra_srv_args"
@@ -3186,7 +3189,7 @@ fullmesh_tests()
fastclose_tests()
{
if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then
- test_linkfail=1024 addr_nr_ns2=fastclose_client \
+ test_linkfail=1024 fastclose=client \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
chk_fclose_nr 1 1
@@ -3194,7 +3197,7 @@ fastclose_tests()
fi
if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then
- test_linkfail=1024 addr_nr_ns2=fastclose_server \
+ test_linkfail=1024 fastclose=server \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
chk_fclose_nr 1 1 invert
--
2.40.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH net-next 3/4] selftests: mptcp: add fullmesh env var
2023-07-12 16:03 [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 1/4] selftests: mptcp: set all env vars as local ones Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 2/4] selftests: mptcp: add fastclose env var Matthieu Baerts
@ 2023-07-12 16:03 ` Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 4/4] selftests: mptcp: add speed " Matthieu Baerts
2023-07-14 3:40 ` [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars patchwork-bot+netdevbpf
4 siblings, 0 replies; 6+ messages in thread
From: Matthieu Baerts @ 2023-07-12 16:03 UTC (permalink / raw)
To: mptcp, Mat Martineau, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan
Cc: Geliang Tang, netdev, linux-kselftest, linux-kernel, Matthieu Baerts
From: Geliang Tang <geliang.tang@suse.com>
Use a new env var fullmesh instead of passing 'fullmesh_*' to addr_nr_ns2.
It can be set with the actual value of addr_nr_ns2 now:
addr_nr_ns2=fullmesh_1 \
run_tests $ns1 $ns2 10.0.1.1
->
fullmesh=1 \
run_tests $ns1 $ns2 10.0.1.1.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 3e8c560938f2..5ad95cc382e6 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -56,6 +56,7 @@ unset addr_nr_ns1
unset addr_nr_ns2
unset sflags
unset fastclose
+unset fullmesh
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
# (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -832,11 +833,12 @@ pm_nl_set_endpoint()
local addr_nr_ns1=${addr_nr_ns1:-0}
local addr_nr_ns2=${addr_nr_ns2:-0}
local sflags=${sflags:-""}
+ local fullmesh=${fullmesh:-""}
local flags="subflow"
- if [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then
+ if [ -n "${fullmesh}" ]; then
flags="${flags},fullmesh"
- addr_nr_ns2=${addr_nr_ns2:9}
+ addr_nr_ns2=${fullmesh}
fi
# let the mptcp subflow be established in background before
@@ -2689,7 +2691,7 @@ mixed_tests()
pm_nl_set_limits $ns2 2 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- addr_nr_ns2=fullmesh_1 \
+ fullmesh=1 \
run_tests $ns1 $ns2 dead:beef:1::1 slow
chk_join_nr 4 4 4
fi
@@ -3102,7 +3104,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 1 3
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- addr_nr_ns2=fullmesh_1 \
+ fullmesh=1 \
run_tests $ns1 $ns2 10.0.1.1 slow
chk_join_nr 3 3 3
chk_add_nr 1 1
@@ -3115,7 +3117,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 2 5
pm_nl_set_limits $ns2 1 5
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- addr_nr_ns2=fullmesh_2 \
+ fullmesh=2 \
run_tests $ns1 $ns2 10.0.1.1 slow
chk_join_nr 5 5 5
chk_add_nr 1 1
@@ -3129,7 +3131,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 2 4
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- addr_nr_ns2=fullmesh_2 \
+ fullmesh=2 \
run_tests $ns1 $ns2 10.0.1.1 slow
chk_join_nr 4 4 4
chk_add_nr 1 1
@@ -3153,7 +3155,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
pm_nl_set_limits $ns2 4 4
- addr_nr_ns2=fullmesh_1 sflags=nofullmesh \
+ fullmesh=1 sflags=nofullmesh \
run_tests $ns1 $ns2 10.0.1.1 slow
chk_join_nr 2 2 2
chk_rm_nr 0 1
--
2.40.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH net-next 4/4] selftests: mptcp: add speed env var
2023-07-12 16:03 [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars Matthieu Baerts
` (2 preceding siblings ...)
2023-07-12 16:03 ` [PATCH net-next 3/4] selftests: mptcp: add fullmesh " Matthieu Baerts
@ 2023-07-12 16:03 ` Matthieu Baerts
2023-07-14 3:40 ` [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars patchwork-bot+netdevbpf
4 siblings, 0 replies; 6+ messages in thread
From: Matthieu Baerts @ 2023-07-12 16:03 UTC (permalink / raw)
To: mptcp, Mat Martineau, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan
Cc: Geliang Tang, netdev, linux-kselftest, linux-kernel, Matthieu Baerts
From: Geliang Tang <geliang.tang@suse.com>
Use a new env var speed instead of using 'speed' argument of run_tests()
and do_transfer(). It can be set with 'fast', 'slow', or the actual speed
number:
run_tests $ns1 $ns2 10.0.1.1 slow
->
speed=slow \
run_tests $ns1 $ns2 10.0.1.1.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 230 +++++++++++++-----------
1 file changed, 125 insertions(+), 105 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 5ad95cc382e6..b5eeea4c3efa 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -57,6 +57,7 @@ unset addr_nr_ns2
unset sflags
unset fastclose
unset fullmesh
+unset speed
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
# (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -988,12 +989,12 @@ do_transfer()
local cl_proto="$3"
local srv_proto="$4"
local connect_addr="$5"
- local speed="$6"
local port=$((10000 + TEST_COUNT - 1))
local cappid
local FAILING_LINKS=${FAILING_LINKS:-""}
local fastclose=${fastclose:-""}
+ local speed=${speed:-"fast"}
:> "$cout"
:> "$sout"
@@ -1026,8 +1027,8 @@ do_transfer()
extra_args="-j"
elif [ $speed = "slow" ]; then
extra_args="-r 50"
- elif [[ $speed = "speed_"* ]]; then
- extra_args="-r ${speed:6}"
+ elif [ $speed -gt 0 ]; then
+ extra_args="-r ${speed}"
fi
local extra_cl_args=""
@@ -1165,7 +1166,6 @@ run_tests()
local listener_ns="$1"
local connector_ns="$2"
local connect_addr="$3"
- local speed="${4:-fast}"
local size
local test_linkfail=${test_linkfail:-0}
@@ -1210,7 +1210,7 @@ run_tests()
make_file "$sinfail" "server" $size
fi
- do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} ${speed}
+ do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr}
}
dump_stats()
@@ -1999,7 +1999,8 @@ subflows_error_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
fi
@@ -2010,7 +2011,8 @@ subflows_error_tests()
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
fi
@@ -2021,7 +2023,8 @@ subflows_error_tests()
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
fi
@@ -2033,7 +2036,8 @@ subflows_error_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 slow &
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1 &
# mpj subflow will be in TW after the reset
wait_attempt_fail $ns2
@@ -2132,7 +2136,8 @@ signal_address_tests()
# the peer could possibly miss some addr notification, allow retransmission
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
# It is not directly linked to the commit introducing this
# symbol but for the parent one which is linked anyway.
@@ -2242,7 +2247,8 @@ add_addr_timeout_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_tx_nr 4 4
chk_add_nr 4 0
@@ -2253,7 +2259,8 @@ add_addr_timeout_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 1 1 1
chk_add_nr 4 0
fi
@@ -2264,7 +2271,8 @@ add_addr_timeout_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
- run_tests $ns1 $ns2 10.0.1.1 speed_10
+ speed=10 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_add_nr 8 0
fi
@@ -2275,7 +2283,8 @@ add_addr_timeout_tests()
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
- run_tests $ns1 $ns2 10.0.1.1 speed_10
+ speed=10 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 8 0
fi
@@ -2288,8 +2297,8 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- addr_nr_ns2=-1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=-1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_rm_tx_nr 1
chk_rm_nr 1 1
@@ -2301,8 +2310,8 @@ remove_tests()
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- addr_nr_ns2=-2 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=-2 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_rm_nr 2 2
fi
@@ -2312,8 +2321,8 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
- addr_nr_ns1=-1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
@@ -2325,8 +2334,8 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- addr_nr_ns1=-1 addr_nr_ns2=-1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
@@ -2339,8 +2348,8 @@ remove_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- addr_nr_ns1=-1 addr_nr_ns2=-2 \
- run_tests $ns1 $ns2 10.0.1.1 speed_10
+ addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_rm_nr 2 2
@@ -2353,8 +2362,8 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
- addr_nr_ns1=-3 \
- run_tests $ns1 $ns2 10.0.1.1 speed_10
+ addr_nr_ns1=-3 speed=10 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert
@@ -2367,8 +2376,8 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
- addr_nr_ns1=-3 \
- run_tests $ns1 $ns2 10.0.1.1 speed_10
+ addr_nr_ns1=-3 speed=10 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
@@ -2381,8 +2390,8 @@ remove_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- addr_nr_ns1=-8 addr_nr_ns2=-8 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
@@ -2395,8 +2404,8 @@ remove_tests()
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- addr_nr_ns1=-8 addr_nr_ns2=-8 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
if mptcp_lib_kversion_ge 5.18; then
@@ -2414,8 +2423,8 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
- addr_nr_ns1=-8 addr_nr_ns2=-8 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert simult
@@ -2428,8 +2437,8 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
- addr_nr_ns1=-8 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-8 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
@@ -2440,8 +2449,8 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- addr_nr_ns2=-9 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=-9 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_rm_nr 1 1
fi
@@ -2451,8 +2460,8 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
- addr_nr_ns1=-9 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-9 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
@@ -2465,8 +2474,8 @@ add_tests()
if reset "add single subflow"; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
- addr_nr_ns2=1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
fi
@@ -2474,8 +2483,8 @@ add_tests()
if reset "add signal address"; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
- addr_nr_ns1=1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 1 1
fi
@@ -2484,8 +2493,8 @@ add_tests()
if reset "add multiple subflows"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
- addr_nr_ns2=2 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=2 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
fi
@@ -2493,8 +2502,8 @@ add_tests()
if reset "add multiple subflows IPv6"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
- addr_nr_ns2=2 \
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ addr_nr_ns2=2 speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 2 2 2
fi
@@ -2502,8 +2511,8 @@ add_tests()
if reset "add multiple addresses IPv6"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 2 2
- addr_nr_ns1=2 \
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ addr_nr_ns1=2 speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 2 2 2
chk_add_nr 2 2
fi
@@ -2516,14 +2525,16 @@ ipv6_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 1 1 1
fi
# add_address, unused IPv6
if reset "unused signal address IPv6"; then
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 0 0 0
chk_add_nr 1 1
fi
@@ -2533,7 +2544,8 @@ ipv6_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 1 1 1
chk_add_nr 1 1
fi
@@ -2543,8 +2555,8 @@ ipv6_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
- addr_nr_ns1=-1 \
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ addr_nr_ns1=-1 speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
@@ -2556,8 +2568,8 @@ ipv6_tests()
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
- addr_nr_ns1=-1 addr_nr_ns2=-1 \
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
@@ -2658,7 +2670,8 @@ mixed_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
fi
@@ -2668,7 +2681,8 @@ mixed_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
- run_tests $ns1 $ns2 dead:beef:2::1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 dead:beef:2::1
chk_join_nr 1 1 1
fi
@@ -2679,7 +2693,8 @@ mixed_tests()
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh
pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
- run_tests $ns1 $ns2 dead:beef:2::1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 dead:beef:2::1
chk_join_nr 1 1 1
fi
@@ -2691,8 +2706,8 @@ mixed_tests()
pm_nl_set_limits $ns2 2 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- fullmesh=1 \
- run_tests $ns1 $ns2 dead:beef:1::1 slow
+ fullmesh=1 speed=slow \
+ run_tests $ns1 $ns2 dead:beef:1::1
chk_join_nr 4 4 4
fi
}
@@ -2705,8 +2720,8 @@ backup_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
- sflags=nobackup \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ sflags=nobackup speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_prio_nr 0 1
fi
@@ -2717,8 +2732,8 @@ backup_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
- sflags=backup \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ sflags=backup speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
@@ -2730,8 +2745,8 @@ backup_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
- sflags=backup \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ sflags=backup speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
@@ -2740,7 +2755,8 @@ backup_tests()
if reset "mpc backup" &&
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
chk_prio_nr 0 1
fi
@@ -2749,7 +2765,8 @@ backup_tests()
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
- run_tests $ns1 $ns2 10.0.1.1 slow
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
chk_prio_nr 1 1
fi
@@ -2757,8 +2774,8 @@ backup_tests()
if reset "mpc switch to backup" &&
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
- sflags=backup \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ sflags=backup speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
chk_prio_nr 0 1
fi
@@ -2767,8 +2784,8 @@ backup_tests()
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
- sflags=backup \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ sflags=backup speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
chk_prio_nr 1 1
fi
@@ -2857,8 +2874,8 @@ add_addr_ports_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
- addr_nr_ns1=-1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
chk_add_nr 1 1 1
chk_rm_nr 1 1 invert
@@ -2874,8 +2891,8 @@ add_addr_ports_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- addr_nr_ns1=-1 addr_nr_ns2=-1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_add_nr 1 1 1
chk_rm_nr 1 1
@@ -2888,8 +2905,8 @@ add_addr_ports_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- addr_nr_ns1=-8 addr_nr_ns2=-2 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=-8 addr_nr_ns2=-2 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
@@ -3091,8 +3108,8 @@ fullmesh_tests()
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh
- addr_nr_ns1=1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns1=1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 4 4 4
chk_add_nr 1 1
fi
@@ -3104,8 +3121,8 @@ fullmesh_tests()
pm_nl_set_limits $ns1 1 3
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- fullmesh=1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ fullmesh=1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 1 1
fi
@@ -3117,8 +3134,8 @@ fullmesh_tests()
pm_nl_set_limits $ns1 2 5
pm_nl_set_limits $ns2 1 5
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- fullmesh=2 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ fullmesh=2 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 5 5 5
chk_add_nr 1 1
fi
@@ -3131,8 +3148,8 @@ fullmesh_tests()
pm_nl_set_limits $ns1 2 4
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- fullmesh=2 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ fullmesh=2 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 4 4 4
chk_add_nr 1 1
fi
@@ -3143,8 +3160,8 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
- addr_nr_ns2=1 sflags=fullmesh \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=1 sflags=fullmesh speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_rm_nr 0 1
fi
@@ -3155,8 +3172,8 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
pm_nl_set_limits $ns2 4 4
- fullmesh=1 sflags=nofullmesh \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ fullmesh=1 sflags=nofullmesh speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_rm_nr 0 1
fi
@@ -3167,8 +3184,8 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
- addr_nr_ns2=1 sflags=backup,fullmesh \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
@@ -3180,8 +3197,8 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_set_limits $ns2 4 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
- sflags=nobackup,nofullmesh \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ sflags=nobackup,nofullmesh speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
@@ -3356,8 +3373,8 @@ userspace_tests()
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- sflags=backup \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ sflags=backup speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 0
chk_prio_nr 0 0
fi
@@ -3370,8 +3387,8 @@ userspace_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- addr_nr_ns2=-1 \
- run_tests $ns1 $ns2 10.0.1.1 slow
+ addr_nr_ns2=-1 speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0
chk_rm_nr 0 0
fi
@@ -3381,7 +3398,8 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 speed_10 &
+ speed=10 \
+ run_tests $ns1 $ns2 10.0.1.1 &
local tests_pid=$!
wait_mpj $ns1
userspace_pm_add_addr 10.0.2.1 10
@@ -3401,7 +3419,8 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 1
- run_tests $ns1 $ns2 10.0.1.1 speed_10 &
+ speed=10 \
+ run_tests $ns1 $ns2 10.0.1.1 &
local tests_pid=$!
wait_mpj $ns2
userspace_pm_add_sf 10.0.3.2 20
@@ -3424,7 +3443,8 @@ endpoint_tests()
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 slow 2>/dev/null &
+ speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
wait_mpj $ns1
pm_nl_check_endpoint 1 "creation" \
@@ -3447,8 +3467,8 @@ endpoint_tests()
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
- test_linkfail=4 \
- run_tests $ns1 $ns2 10.0.1.1 speed_20 2>/dev/null &
+ test_linkfail=4 speed=20 \
+ run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
wait_mpj $ns2
chk_subflow_nr needtitle "before delete" 2
--
2.40.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars
2023-07-12 16:03 [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars Matthieu Baerts
` (3 preceding siblings ...)
2023-07-12 16:03 ` [PATCH net-next 4/4] selftests: mptcp: add speed " Matthieu Baerts
@ 2023-07-14 3:40 ` patchwork-bot+netdevbpf
4 siblings, 0 replies; 6+ messages in thread
From: patchwork-bot+netdevbpf @ 2023-07-14 3:40 UTC (permalink / raw)
To: Matthieu Baerts
Cc: mptcp, martineau, davem, edumazet, kuba, pabeni, shuah,
geliang.tang, netdev, linux-kselftest, linux-kernel
Hello:
This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Wed, 12 Jul 2023 18:03:15 +0200 you wrote:
> In this series, Geliang did some refactoring in the mptcp_join.sh file.
>
> Patch 1 reduces the scope of some global env vars, only used by some
> tests: easier to deal with.
>
> Patch 2 uses a dedicated env var for fastclose case instead of re-using
> addr_nr_ns2 with embedded info, clearer.
>
> [...]
Here is the summary with links:
- [net-next,1/4] selftests: mptcp: set all env vars as local ones
https://git.kernel.org/netdev/net-next/c/662aa22d7dcd
- [net-next,2/4] selftests: mptcp: add fastclose env var
https://git.kernel.org/netdev/net-next/c/080b7f5733fd
- [net-next,3/4] selftests: mptcp: add fullmesh env var
https://git.kernel.org/netdev/net-next/c/4aadde088a58
- [net-next,4/4] selftests: mptcp: add speed env var
https://git.kernel.org/netdev/net-next/c/e571fb09c893
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-07-14 3:40 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-07-12 16:03 [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 1/4] selftests: mptcp: set all env vars as local ones Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 2/4] selftests: mptcp: add fastclose env var Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 3/4] selftests: mptcp: add fullmesh " Matthieu Baerts
2023-07-12 16:03 ` [PATCH net-next 4/4] selftests: mptcp: add speed " Matthieu Baerts
2023-07-14 3:40 ` [PATCH net-next 0/4] selftests: mptcp: join: pass args in new env vars patchwork-bot+netdevbpf
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.