[PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Rohit Agarwal]

Hi,

Changes in v4:
 - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.

Changes in v3:
 - Removed the unnecessary change introduced in v2 of patch 2/5
 - Added Fixes tag in patch 3/5
 - Rebased patch 5/5 on Dmitry's cleanup patches.
   https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
   https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

Changes in v2:
 - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
   and reusing the bindings.
 - Rephrased the commit message of patch 3/5
 - Removed stray lines from the patch 5/5

This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.

Thanks,
Rohit.


Rohit Agarwal (5):
  dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
  dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
  dt-bindings: usb: dwc3: Add SDX75 compatible
  phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml        |   2 +
 .../bindings/phy/qcom,snps-eusb2-phy.yaml          |   7 +-
 .../devicetree/bindings/usb/qcom,dwc3.yaml         |   4 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 173 +++++++++++++++++++++
 4 files changed, 185 insertions(+), 1 deletion(-)

-- 
2.7.4

[PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Rohit Agarwal]

Hi,

Changes in v4:
 - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.

Changes in v3:
 - Removed the unnecessary change introduced in v2 of patch 2/5
 - Added Fixes tag in patch 3/5
 - Rebased patch 5/5 on Dmitry's cleanup patches.
   https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
   https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

Changes in v2:
 - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
   and reusing the bindings.
 - Rephrased the commit message of patch 3/5
 - Removed stray lines from the patch 5/5

This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.

Thanks,
Rohit.


Rohit Agarwal (5):
  dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
  dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
  dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
  dt-bindings: usb: dwc3: Add SDX75 compatible
  phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml        |   2 +
 .../bindings/phy/qcom,snps-eusb2-phy.yaml          |   7 +-
 .../devicetree/bindings/usb/qcom,dwc3.yaml         |   4 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 173 +++++++++++++++++++++
 4 files changed, 185 insertions(+), 1 deletion(-)

-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75

[Rohit Agarwal]

Add a dt-bindings compatible string for the SDX75 SoC that
uses Synopsis eUSB2 PHY.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
index c53bab1..c958286 100644
--- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
@@ -14,7 +14,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,sm8550-snps-eusb2-phy
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sdx75-snps-eusb2-phy
+          - const: qcom,sm8550-snps-eusb2-phy
+      - const: qcom,sm8550-snps-eusb2-phy
 
   reg:
     maxItems: 1
-- 
2.7.4

[PATCH v4 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75

[Rohit Agarwal]

Add a dt-bindings compatible string for the SDX75 SoC that
uses Synopsis eUSB2 PHY.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
index c53bab1..c958286 100644
--- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
@@ -14,7 +14,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,sm8550-snps-eusb2-phy
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sdx75-snps-eusb2-phy
+          - const: qcom,sm8550-snps-eusb2-phy
+      - const: qcom,sm8550-snps-eusb2-phy
 
   reg:
     maxItems: 1
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY

[Rohit Agarwal]

Add dt-bindings for USB3 PHY found on Qualcomm SDX75.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index f99fbbc..d58dd74 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,6 +20,7 @@ properties:
       - qcom,qcm2290-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sdx75-qmp-usb3-uni-phy
       - qcom,sm6115-qmp-usb3-phy
 
   reg:
@@ -75,6 +76,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq9574-qmp-usb3-phy
+              - qcom,sdx75-qmp-usb3-uni-phy
     then:
       properties:
         clock-names:
-- 
2.7.4

[PATCH v4 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY

[Rohit Agarwal]

Add dt-bindings for USB3 PHY found on Qualcomm SDX75.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml         | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index f99fbbc..d58dd74 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,6 +20,7 @@ properties:
       - qcom,qcm2290-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sdx75-qmp-usb3-uni-phy
       - qcom,sm6115-qmp-usb3-phy
 
   reg:
@@ -75,6 +76,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq9574-qmp-usb3-phy
+              - qcom,sdx75-qmp-usb3-uni-phy
     then:
       properties:
         clock-names:
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks

[Rohit Agarwal]

SDX65 has 5 clocks so mention in the bindings.

Fixes: 16946a60715c ("dt-bindings: usb: qcom,dwc3: fix clock matching")
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 6759105..018117b 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -180,6 +180,7 @@ allOf:
               - qcom,sdm670-dwc3
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
               - qcom,sm6350-dwc3
     then:
       properties:
-- 
2.7.4

[PATCH v4 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks

[Rohit Agarwal]

SDX65 has 5 clocks so mention in the bindings.

Fixes: 16946a60715c ("dt-bindings: usb: qcom,dwc3: fix clock matching")
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 6759105..018117b 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -180,6 +180,7 @@ allOf:
               - qcom,sdm670-dwc3
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
               - qcom,sm6350-dwc3
     then:
       properties:
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible

[Rohit Agarwal]

Document the SDX75 dwc3 compatible.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 018117b..d78b721 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -34,6 +34,7 @@ properties:
           - qcom,sdm845-dwc3
           - qcom,sdx55-dwc3
           - qcom,sdx65-dwc3
+          - qcom,sdx75-dwc3
           - qcom,sm4250-dwc3
           - qcom,sm6115-dwc3
           - qcom,sm6125-dwc3
@@ -181,6 +182,7 @@ allOf:
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
               - qcom,sm6350-dwc3
     then:
       properties:
@@ -364,6 +366,7 @@ allOf:
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
               - qcom,sm4250-dwc3
               - qcom,sm6125-dwc3
               - qcom,sm6350-dwc3
-- 
2.7.4

[PATCH v4 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible

[Rohit Agarwal]

Document the SDX75 dwc3 compatible.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 018117b..d78b721 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -34,6 +34,7 @@ properties:
           - qcom,sdm845-dwc3
           - qcom,sdx55-dwc3
           - qcom,sdx65-dwc3
+          - qcom,sdx75-dwc3
           - qcom,sm4250-dwc3
           - qcom,sm6115-dwc3
           - qcom,sm6125-dwc3
@@ -181,6 +182,7 @@ allOf:
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
               - qcom,sm6350-dwc3
     then:
       properties:
@@ -364,6 +366,7 @@ allOf:
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
               - qcom,sm4250-dwc3
               - qcom,sm6125-dwc3
               - qcom,sm6350-dwc3
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

[Rohit Agarwal]

Add support for USB3 QMP PHY found in SDX75 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 173 ++++++++++++++++++++++++++++++++
 1 file changed, 173 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 2a094f2..2bbf21e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -24,6 +24,7 @@
 #include "phy-qcom-qmp-pcs-misc-v4.h"
 #include "phy-qcom-qmp-pcs-usb-v4.h"
 #include "phy-qcom-qmp-pcs-usb-v5.h"
+#include "phy-qcom-qmp-pcs-usb-v6.h"
 
 /* QPHY_SW_RESET bit */
 #define SW_RESET				BIT(0)
@@ -151,6 +152,17 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
+static const unsigned int qmp_v6_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_SW_RESET]			= QPHY_V6_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V6_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V6_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V6_PCS_POWER_DOWN_CONTROL,
+
+	/* In PCS_USB */
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
+};
+
 static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -871,6 +883,134 @@ static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
 };
 
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x2e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0x25),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0x25),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3, 0x37),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_TX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_RX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0xf5),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_5, 0x5f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_PI_CONTROLS, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL1, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x13),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xdf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_EN_TIMER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DCC_CTRL1, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VTH_CODE, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_CTRL1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_REFGEN_REQ_CONFIG1, 0x21),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+};
+
 static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
@@ -1311,6 +1451,14 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
 	.rx		= 0x1000,
 };
 
+static const struct qmp_usb_offsets qmp_usb_offsets_v6 = {
+	.serdes		= 0,
+	.pcs		= 0x0200,
+	.pcs_usb	= 0x1200,
+	.tx		= 0x0e00,
+	.rx		= 0x1000,
+};
+
 static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.lanes			= 1,
 
@@ -1531,6 +1679,28 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
 	.has_pwrdn_delay	= true,
 };
 
+static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
+	.lanes			= 1,
+	.offsets		= &qmp_usb_offsets_v6,
+
+	.serdes_tbl		= sdx75_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sdx75_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sdx75_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sdx75_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sdx75_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_usb_tbl),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v6_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x1000,
+
+	.has_pwrdn_delay	= true,
+};
+
 static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 	.lanes			= 1,
 
@@ -2243,6 +2413,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 		.compatible = "qcom,sdx65-qmp-usb3-uni-phy",
 		.data = &sdx65_usb3_uniphy_cfg,
 	}, {
+		.compatible = "qcom,sdx75-qmp-usb3-uni-phy",
+		.data = &sdx75_usb3_uniphy_cfg,
+	}, {
 		.compatible = "qcom,sm6115-qmp-usb3-phy",
 		.data = &qcm2290_usb3phy_cfg,
 	}, {
-- 
2.7.4

[PATCH v4 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

[Rohit Agarwal]

Add support for USB3 QMP PHY found in SDX75 platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 173 ++++++++++++++++++++++++++++++++
 1 file changed, 173 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 2a094f2..2bbf21e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -24,6 +24,7 @@
 #include "phy-qcom-qmp-pcs-misc-v4.h"
 #include "phy-qcom-qmp-pcs-usb-v4.h"
 #include "phy-qcom-qmp-pcs-usb-v5.h"
+#include "phy-qcom-qmp-pcs-usb-v6.h"
 
 /* QPHY_SW_RESET bit */
 #define SW_RESET				BIT(0)
@@ -151,6 +152,17 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
+static const unsigned int qmp_v6_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_SW_RESET]			= QPHY_V6_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V6_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V6_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V6_PCS_POWER_DOWN_CONTROL,
+
+	/* In PCS_USB */
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
+};
+
 static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -871,6 +883,134 @@ static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
 };
 
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x2e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0x25),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xb7),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0x25),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3, 0x37),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_TX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_RX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0xf5),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_3, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_5, 0x5f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V6_TX_PI_QEC_CTRL, 0x21),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_PI_CONTROLS, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL1, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x13),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xdf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xdc),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_EN_TIMER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_DCC_CTRL1, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_VTH_CODE, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_CTRL1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_REFGEN_REQ_CONFIG1, 0x21),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sdx75_usb3_uniphy_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
+};
+
 static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
 	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
@@ -1311,6 +1451,14 @@ static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
 	.rx		= 0x1000,
 };
 
+static const struct qmp_usb_offsets qmp_usb_offsets_v6 = {
+	.serdes		= 0,
+	.pcs		= 0x0200,
+	.pcs_usb	= 0x1200,
+	.tx		= 0x0e00,
+	.rx		= 0x1000,
+};
+
 static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.lanes			= 1,
 
@@ -1531,6 +1679,28 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
 	.has_pwrdn_delay	= true,
 };
 
+static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
+	.lanes			= 1,
+	.offsets		= &qmp_usb_offsets_v6,
+
+	.serdes_tbl		= sdx75_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sdx75_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sdx75_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sdx75_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sdx75_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_usb_tbl),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v6_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x1000,
+
+	.has_pwrdn_delay	= true,
+};
+
 static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 	.lanes			= 1,
 
@@ -2243,6 +2413,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 		.compatible = "qcom,sdx65-qmp-usb3-uni-phy",
 		.data = &sdx65_usb3_uniphy_cfg,
 	}, {
+		.compatible = "qcom,sdx75-qmp-usb3-uni-phy",
+		.data = &sdx75_usb3_uniphy_cfg,
+	}, {
 		.compatible = "qcom,sm6115-qmp-usb3-phy",
 		.data = &qcm2290_usb3phy_cfg,
 	}, {
-- 
2.7.4


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

[Dmitry Baryshkov]

On Fri, 22 Sept 2023 at 08:12, Rohit Agarwal <quic_rohiagar@quicinc.com> wrote:
>
> Add support for USB3 QMP PHY found in SDX75 platform.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 173 ++++++++++++++++++++++++++++++++
>  1 file changed, 173 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

>

-- 
With best wishes
Dmitry

Re: [PATCH v4 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support

[Dmitry Baryshkov]

On Fri, 22 Sept 2023 at 08:12, Rohit Agarwal <quic_rohiagar@quicinc.com> wrote:
>
> Add support for USB3 QMP PHY found in SDX75 platform.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 173 ++++++++++++++++++++++++++++++++
>  1 file changed, 173 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

>

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Vinod Koul]

On 22-09-23, 10:42, Rohit Agarwal wrote:
> Hi,
> 
> Changes in v4:
>  - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
> 
> Changes in v3:
>  - Removed the unnecessary change introduced in v2 of patch 2/5
>  - Added Fixes tag in patch 3/5
>  - Rebased patch 5/5 on Dmitry's cleanup patches.
>    https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>    https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> 
> Changes in v2:
>  - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
>    and reusing the bindings.
>  - Rephrased the commit message of patch 3/5
>  - Removed stray lines from the patch 5/5
> 
> This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.

The phy patches fail to apply, can you please rebase the three patches
and resend

-- 
~Vinod

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Vinod Koul]

On 22-09-23, 10:42, Rohit Agarwal wrote:
> Hi,
> 
> Changes in v4:
>  - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
> 
> Changes in v3:
>  - Removed the unnecessary change introduced in v2 of patch 2/5
>  - Added Fixes tag in patch 3/5
>  - Rebased patch 5/5 on Dmitry's cleanup patches.
>    https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>    https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> 
> Changes in v2:
>  - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
>    and reusing the bindings.
>  - Rephrased the commit message of patch 3/5
>  - Removed stray lines from the patch 5/5
> 
> This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.

The phy patches fail to apply, can you please rebase the three patches
and resend

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Rohit Agarwal]

On 10/13/2023 3:59 PM, Vinod Koul wrote:
> On 22-09-23, 10:42, Rohit Agarwal wrote:
>> Hi,
>>
>> Changes in v4:
>>   - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
>>
>> Changes in v3:
>>   - Removed the unnecessary change introduced in v2 of patch 2/5
>>   - Added Fixes tag in patch 3/5
>>   - Rebased patch 5/5 on Dmitry's cleanup patches.
>>     https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>>     https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
>>
>> Changes in v2:
>>   - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
>>     and reusing the bindings.
>>   - Rephrased the commit message of patch 3/5
>>   - Removed stray lines from the patch 5/5
>>
>> This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.
> The phy patches fail to apply, can you please rebase the three patches
> and resend
Can you please apply these two series. This series depends on it for 
successful compilation.
[1] 
https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
[2] 
https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

Thanks,
Rohit.

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Rohit Agarwal]

On 10/13/2023 3:59 PM, Vinod Koul wrote:
> On 22-09-23, 10:42, Rohit Agarwal wrote:
>> Hi,
>>
>> Changes in v4:
>>   - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
>>
>> Changes in v3:
>>   - Removed the unnecessary change introduced in v2 of patch 2/5
>>   - Added Fixes tag in patch 3/5
>>   - Rebased patch 5/5 on Dmitry's cleanup patches.
>>     https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>>     https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
>>
>> Changes in v2:
>>   - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
>>     and reusing the bindings.
>>   - Rephrased the commit message of patch 3/5
>>   - Removed stray lines from the patch 5/5
>>
>> This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.
> The phy patches fail to apply, can you please rebase the three patches
> and resend
Can you please apply these two series. This series depends on it for 
successful compilation.
[1] 
https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
[2] 
https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

Thanks,
Rohit.

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Vinod Koul]

On 13-10-23, 16:08, Rohit Agarwal wrote:
> 
> On 10/13/2023 3:59 PM, Vinod Koul wrote:
> > On 22-09-23, 10:42, Rohit Agarwal wrote:
> > > Hi,
> > > 
> > > Changes in v4:
> > >   - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
> > > 
> > > Changes in v3:
> > >   - Removed the unnecessary change introduced in v2 of patch 2/5
> > >   - Added Fixes tag in patch 3/5
> > >   - Rebased patch 5/5 on Dmitry's cleanup patches.
> > >     https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
> > >     https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> > > 
> > > Changes in v2:
> > >   - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
> > >     and reusing the bindings.
> > >   - Rephrased the commit message of patch 3/5
> > >   - Removed stray lines from the patch 5/5
> > > 
> > > This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.
> > The phy patches fail to apply, can you please rebase the three patches
> > and resend
> Can you please apply these two series. This series depends on it for
> successful compilation.
> [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/

This one has a pending comment bw Konrad and Dmitry..

> [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

This one is already in -next

> 
> Thanks,
> Rohit.

-- 
~Vinod

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Vinod Koul]

On 13-10-23, 16:08, Rohit Agarwal wrote:
> 
> On 10/13/2023 3:59 PM, Vinod Koul wrote:
> > On 22-09-23, 10:42, Rohit Agarwal wrote:
> > > Hi,
> > > 
> > > Changes in v4:
> > >   - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
> > > 
> > > Changes in v3:
> > >   - Removed the unnecessary change introduced in v2 of patch 2/5
> > >   - Added Fixes tag in patch 3/5
> > >   - Rebased patch 5/5 on Dmitry's cleanup patches.
> > >     https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
> > >     https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> > > 
> > > Changes in v2:
> > >   - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
> > >     and reusing the bindings.
> > >   - Rephrased the commit message of patch 3/5
> > >   - Removed stray lines from the patch 5/5
> > > 
> > > This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.
> > The phy patches fail to apply, can you please rebase the three patches
> > and resend
> Can you please apply these two series. This series depends on it for
> successful compilation.
> [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/

This one has a pending comment bw Konrad and Dmitry..

> [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

This one is already in -next

> 
> Thanks,
> Rohit.

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Rohit Agarwal]

On 10/13/2023 4:15 PM, Vinod Koul wrote:
> On 13-10-23, 16:08, Rohit Agarwal wrote:
>> On 10/13/2023 3:59 PM, Vinod Koul wrote:
>>> On 22-09-23, 10:42, Rohit Agarwal wrote:
>>>> Hi,
>>>>
>>>> Changes in v4:
>>>>    - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
>>>>
>>>> Changes in v3:
>>>>    - Removed the unnecessary change introduced in v2 of patch 2/5
>>>>    - Added Fixes tag in patch 3/5
>>>>    - Rebased patch 5/5 on Dmitry's cleanup patches.
>>>>      https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>>>>      https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
>>>>
>>>> Changes in v2:
>>>>    - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
>>>>      and reusing the bindings.
>>>>    - Rephrased the commit message of patch 3/5
>>>>    - Removed stray lines from the patch 5/5
>>>>
>>>> This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.
>>> The phy patches fail to apply, can you please rebase the three patches
>>> and resend
>> Can you please apply these two series. This series depends on it for
>> successful compilation.
>> [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
> This one has a pending comment bw Konrad and Dmitry..
Ok, Will wait for this to get resolved.

Thanks,
Rohit.
>
>> [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> This one is already in -next
>
>> Thanks,
>> Rohit.

Re: [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Rohit Agarwal]

On 10/13/2023 4:15 PM, Vinod Koul wrote:
> On 13-10-23, 16:08, Rohit Agarwal wrote:
>> On 10/13/2023 3:59 PM, Vinod Koul wrote:
>>> On 22-09-23, 10:42, Rohit Agarwal wrote:
>>>> Hi,
>>>>
>>>> Changes in v4:
>>>>    - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
>>>>
>>>> Changes in v3:
>>>>    - Removed the unnecessary change introduced in v2 of patch 2/5
>>>>    - Added Fixes tag in patch 3/5
>>>>    - Rebased patch 5/5 on Dmitry's cleanup patches.
>>>>      https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>>>>      https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
>>>>
>>>> Changes in v2:
>>>>    - Dropped the new dt schema introduced in v1 for sdx75 usb3 phy
>>>>      and reusing the bindings.
>>>>    - Rephrased the commit message of patch 3/5
>>>>    - Removed stray lines from the patch 5/5
>>>>
>>>> This series adds support of USB3 PHY support for Qualcomm's SDX75 Platform.
>>> The phy patches fail to apply, can you please rebase the three patches
>>> and resend
>> Can you please apply these two series. This series depends on it for
>> successful compilation.
>> [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
> This one has a pending comment bw Konrad and Dmitry..
Ok, Will wait for this to get resolved.

Thanks,
Rohit.
>
>> [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> This one is already in -next
>
>> Thanks,
>> Rohit.

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: (subset) [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Vinod Koul]

On Fri, 22 Sep 2023 10:42:00 +0530, Rohit Agarwal wrote:
> Changes in v4:
>  - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
> 
> Changes in v3:
>  - Removed the unnecessary change introduced in v2 of patch 2/5
>  - Added Fixes tag in patch 3/5
>  - Rebased patch 5/5 on Dmitry's cleanup patches.
>    https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>    https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
      (no commit info)
[2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
      (no commit info)
[5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
      commit: 7f6f9e0def00cfaeb1d034fd13dbd84470aeccbd

Best regards,
-- 
~Vinod

Re: (subset) [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform

[Vinod Koul]

On Fri, 22 Sep 2023 10:42:00 +0530, Rohit Agarwal wrote:
> Changes in v4:
>  - Replaced the v5 offsets with v6 offsets as per Dmitry's suggestion in patch 5/5.
> 
> Changes in v3:
>  - Removed the unnecessary change introduced in v2 of patch 2/5
>  - Added Fixes tag in patch 3/5
>  - Rebased patch 5/5 on Dmitry's cleanup patches.
>    https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
>    https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
      (no commit info)
[2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
      (no commit info)
[5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
      commit: 7f6f9e0def00cfaeb1d034fd13dbd84470aeccbd

Best regards,
-- 
~Vinod



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy