* RE: failed when boot the domain with shadow mode enabled
@ 2005-06-24 12:55 You, Yongkang
0 siblings, 0 replies; 2+ messages in thread
From: You, Yongkang @ 2005-06-24 12:55 UTC (permalink / raw)
To: Li, Chengyuan, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 2421 bytes --]
I opened a bug of xenU failed to create with shadow mode enable.
http://bugzilla.xensource.com/cgi-bin/bugzilla/show_bug.cgi?id=85
<http://bugzilla.xensource.com/cgi-bin/bugzilla/show_bug.cgi?id=85>
Is there anybody have any idea of it?
I also opened a bug about xenU failed to destroy after violate break xm
migration process.
http://bugzilla.xensource.com/cgi-bin/bugzilla/show_bug.cgi?id=84
<http://bugzilla.xensource.com/cgi-bin/bugzilla/show_bug.cgi?id=84>
Does anyone meet that before?
Thanks,
Yongkang You(Kangkang)
________________________________
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Li,
Chengyuan
Sent: Thursday, June 23, 2005 7:25 PM
To: xen-devel@lists.xensource.com
Subject: [Xen-devel] failed when boot the domain with shadow mode
enabled
Hi,
I tried to run the dom0 & domU with shadow mode enabled, but both are
failed.
For dom0:
1 Set opt_dom0_shadow=1
2.Compile the dom0 kernel with CONFIG_XEN_SHADOW_MODE
Then boot the system, but it failed in the function new_guest_cr3() when
get_page_type().
For domU:
1.Compile the domU kernel with CONFIG_XEN_SHADOW_MODE
When "xm create" the domU, it failed at the similar point as dom0,
because of get_page_type() failed.
Is it a bug in shadow mode for dom0 & domU, or the way I start the dom
with shadow mode enabled is not right?
(XEN) DOM0: (file=mm.c, line=1389) Bad type (saw f0000001 != exp
40000000) for
fn 8102
(XEN) DOM0: (file=mm.c, line=370) Bad page type for pfn 8102 (f0000001)
(XEN) DOM0: (file=mm.c, line=1485) Error while installing new baseptr
8102
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) CPU: 0
(XEN) EIP: e019:[<c01157bf>]
(XEN) EFLAGS: 00200282 CONTEXT: guest
(XEN) eax: ffffffea ebx: c04fff24 ecx: 00000001 edx: 00000000
(XEN) esi: 00007ff0 edi: c0102fc0 ebp: c05b4000 esp: c04fff18
(XEN) cr0: 8005003b cr3: 019f3000
(XEN) ds: e021 es: e021 fs: 0000 gs: e021 ss: e021 cs: e019
(XEN) Guest stack trace from esp=c04fff18:
0
(XEN) c01157bf 0001e019 00210282 00000005 00008102 00000000 c04fe000
0000000
0
(XEN) c05b4fc0 c050d710 00102000 c0567394 00100000 004b8fff 00001000
0000000
f
(XEN) c05240d8 c0101000 00000000 c050d82b 004b8fff c0507bdb 00100000
004b8ff
Thanks,
Chengyuan
[-- Attachment #1.2: Type: text/html, Size: 12089 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* failed when boot the domain with shadow mode enabled
@ 2005-06-23 11:24 Li, Chengyuan
0 siblings, 0 replies; 2+ messages in thread
From: Li, Chengyuan @ 2005-06-23 11:24 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 1511 bytes --]
Hi,
I tried to run the dom0 & domU with shadow mode enabled, but both are
failed.
For dom0:
1 Set opt_dom0_shadow=1
2.Compile the dom0 kernel with CONFIG_XEN_SHADOW_MODE
Then boot the system, but it failed in the function new_guest_cr3() when
get_page_type().
For domU:
1.Compile the domU kernel with CONFIG_XEN_SHADOW_MODE
When "xm create" the domU, it failed at the similar point as dom0,
because of get_page_type() failed.
Is it a bug in shadow mode for dom0 & domU, or the way I start the dom
with shadow mode enabled is not right?
(XEN) DOM0: (file=mm.c, line=1389) Bad type (saw f0000001 != exp
40000000) for
fn 8102
(XEN) DOM0: (file=mm.c, line=370) Bad page type for pfn 8102 (f0000001)
(XEN) DOM0: (file=mm.c, line=1485) Error while installing new baseptr
8102
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) CPU: 0
(XEN) EIP: e019:[<c01157bf>]
(XEN) EFLAGS: 00200282 CONTEXT: guest
(XEN) eax: ffffffea ebx: c04fff24 ecx: 00000001 edx: 00000000
(XEN) esi: 00007ff0 edi: c0102fc0 ebp: c05b4000 esp: c04fff18
(XEN) cr0: 8005003b cr3: 019f3000
(XEN) ds: e021 es: e021 fs: 0000 gs: e021 ss: e021 cs: e019
(XEN) Guest stack trace from esp=c04fff18:
0
(XEN) c01157bf 0001e019 00210282 00000005 00008102 00000000 c04fe000
0000000
0
(XEN) c05b4fc0 c050d710 00102000 c0567394 00100000 004b8fff 00001000
0000000
f
(XEN) c05240d8 c0101000 00000000 c050d82b 004b8fff c0507bdb 00100000
004b8ff
Thanks,
Chengyuan
[-- Attachment #1.2: Type: text/html, Size: 5684 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-06-24 12:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-06-24 12:55 failed when boot the domain with shadow mode enabled You, Yongkang
-- strict thread matches above, loose matches on Subject: below --
2005-06-23 11:24 Li, Chengyuan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.