Re: [alsa-devel] [PATCH v2 1/3] dt-bindings: ASoC: Add TDA7802 amplifier

[Thomas Preston <thomas.preston@codethink.co.uk>]

On 30/07/2019 14:12, Marco Felsch wrote:
> Hi Charles,
> 
> sorry for jumping in..
> 
> On 19-07-30 13:27, Charles Keepax wrote:
>> On Tue, Jul 30, 2019 at 01:09:35PM +0100, Thomas Preston wrote:
>>> Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
>>> Cc: Patrick Glaser <pglaser@tesla.com>
>>> Cc: Rob Duncan <rduncan@tesla.com>
>>> Cc: Nate Case <ncase@tesla.com>
>>> ---
>>>  .../devicetree/bindings/sound/tda7802.txt     | 26 +++++++++++++++++++
>>>  1 file changed, 26 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/sound/tda7802.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/tda7802.txt b/Documentation/devicetree/bindings/sound/tda7802.txt
>>> new file mode 100644
>>> index 000000000000..f80aaf4f1ba0
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/sound/tda7802.txt
>>> @@ -0,0 +1,26 @@
>>> +ST TDA7802 audio processor
>>> +
>>> +This device supports I2C only.
>>> +
>>> +Required properties:
>>> +
>>> +- compatible : "st,tda7802"
>>> +- reg : the I2C address of the device
>>> +- enable-supply : a regulator spec for the PLLen pin
> 
> Shouldn't that be a pin called 'pllen-gpios'? IMHO I would not use a
> regulator for that.
> 
> Regards,
>   Marco
> 

Hi Marco,
We have multiple amplifiers hooked up in a chain, and all the PLLens
are connected to one GPIO. So we need to use a regulator so that
i2c-TDA7802:00 doesn't turn off the PLLen which i2c-TDA7802:01 still
requires.

This is why we use a regulator. Is there GPIO support for this?

Thanks,
Thomas