* [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
@ 2016-09-07 11:46 ` Andy Yan
0 siblings, 0 replies; 12+ messages in thread
From: Andy Yan @ 2016-09-07 11:46 UTC (permalink / raw)
To: linux-arm-kernel
I2C and MMC are very basic modules for a board to bootup, as I2C always
used to configure PMIC and MMC devices often used to store filesytem.
So enable them here to let the rockchip based arm64 boards can bootup.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index eadf485..427b6dc 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -222,6 +222,7 @@ CONFIG_I2C_QUP=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
+CONFIG_I2C_RK3X=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
CONFIG_SPI_ORION=y
@@ -323,6 +324,7 @@ CONFIG_MMC_SPI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_K3=y
+CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator
2016-09-07 11:46 ` Andy Yan
@ 2016-09-07 11:50 ` Andy Yan
-1 siblings, 0 replies; 12+ messages in thread
From: Andy Yan @ 2016-09-07 11:50 UTC (permalink / raw)
To: arnd
Cc: srinivas.kandagatla, treding, kuninori.morimoto.gx, alim.akhtar,
linux-kernel, krzk, will.deacon, catalin.marinas, riku.voipio,
linux-arm-kernel, horms+renesas, shawn.lin, Andy Yan
Many rockchip based arm64 boards use RK808 as PMIC, so
enabe it here let the board bootup normally.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 427b6dc..4b61ed9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -258,6 +258,7 @@ CONFIG_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MFD_MAX77620=y
+CONFIG_MFD_RK808=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_HI655X_PMIC=y
@@ -270,6 +271,7 @@ CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator
@ 2016-09-07 11:50 ` Andy Yan
0 siblings, 0 replies; 12+ messages in thread
From: Andy Yan @ 2016-09-07 11:50 UTC (permalink / raw)
To: linux-arm-kernel
Many rockchip based arm64 boards use RK808 as PMIC, so
enabe it here let the board bootup normally.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 427b6dc..4b61ed9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -258,6 +258,7 @@ CONFIG_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MFD_MAX77620=y
+CONFIG_MFD_RK808=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_HI655X_PMIC=y
@@ -270,6 +271,7 @@ CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator
2016-09-07 11:50 ` Andy Yan
@ 2016-11-17 16:03 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2016-11-17 16:03 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Andy Yan, arnd, kuninori.morimoto.gx, catalin.marinas,
riku.voipio, will.deacon, linux-kernel, krzk,
srinivas.kandagatla, alim.akhtar, horms+renesas, treding,
shawn.lin
Am Mittwoch, 7. September 2016, 19:50:28 CET schrieb Andy Yan:
> Many rockchip based arm64 boards use RK808 as PMIC, so
> enabe it here let the board bootup normally.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
applied to a defconfig64 branch after adding rk808-rtc as module and rk808-clk
output as builtin as well.
Thanks
Heiko
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator
@ 2016-11-17 16:03 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2016-11-17 16:03 UTC (permalink / raw)
To: linux-arm-kernel
Am Mittwoch, 7. September 2016, 19:50:28 CET schrieb Andy Yan:
> Many rockchip based arm64 boards use RK808 as PMIC, so
> enabe it here let the board bootup normally.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
applied to a defconfig64 branch after adding rk808-rtc as module and rk808-clk
output as builtin as well.
Thanks
Heiko
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
2016-09-07 11:46 ` Andy Yan
@ 2016-09-19 10:10 ` Andy Yan
-1 siblings, 0 replies; 12+ messages in thread
From: Andy Yan @ 2016-09-19 10:10 UTC (permalink / raw)
To: arnd, treding, shawn.lin, Heiko Stübner
Cc: srinivas.kandagatla, kuninori.morimoto.gx, alim.akhtar,
linux-kernel, krzk, will.deacon, catalin.marinas, riku.voipio,
linux-arm-kernel, horms+renesas
Hi :
Respected maintainers, is there some suggestions for this patch?
On 2016年09月07日 19:46, Andy Yan wrote:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index eadf485..427b6dc 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -222,6 +222,7 @@ CONFIG_I2C_QUP=y
> CONFIG_I2C_TEGRA=y
> CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> +CONFIG_I2C_RK3X=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> CONFIG_SPI_ORION=y
> @@ -323,6 +324,7 @@ CONFIG_MMC_SPI=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_EXYNOS=y
> CONFIG_MMC_DW_K3=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SUNXI=y
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
@ 2016-09-19 10:10 ` Andy Yan
0 siblings, 0 replies; 12+ messages in thread
From: Andy Yan @ 2016-09-19 10:10 UTC (permalink / raw)
To: linux-arm-kernel
Hi :
Respected maintainers, is there some suggestions for this patch?
On 2016?09?07? 19:46, Andy Yan wrote:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index eadf485..427b6dc 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -222,6 +222,7 @@ CONFIG_I2C_QUP=y
> CONFIG_I2C_TEGRA=y
> CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> +CONFIG_I2C_RK3X=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> CONFIG_SPI_ORION=y
> @@ -323,6 +324,7 @@ CONFIG_MMC_SPI=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_EXYNOS=y
> CONFIG_MMC_DW_K3=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SUNXI=y
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
2016-09-07 11:46 ` Andy Yan
@ 2016-11-03 11:06 ` Andy Yan
-1 siblings, 0 replies; 12+ messages in thread
From: Andy Yan @ 2016-11-03 11:06 UTC (permalink / raw)
To: arnd, Heiko Stübner
Cc: srinivas.kandagatla, treding, kuninori.morimoto.gx, alim.akhtar,
linux-kernel, krzk, will.deacon, catalin.marinas, riku.voipio,
linux-arm-kernel, horms+renesas, shawn.lin
Ping
On 2016年09月07日 19:46, Andy Yan wrote:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index eadf485..427b6dc 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -222,6 +222,7 @@ CONFIG_I2C_QUP=y
> CONFIG_I2C_TEGRA=y
> CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> +CONFIG_I2C_RK3X=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> CONFIG_SPI_ORION=y
> @@ -323,6 +324,7 @@ CONFIG_MMC_SPI=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_EXYNOS=y
> CONFIG_MMC_DW_K3=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SUNXI=y
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
@ 2016-11-03 11:06 ` Andy Yan
0 siblings, 0 replies; 12+ messages in thread
From: Andy Yan @ 2016-11-03 11:06 UTC (permalink / raw)
To: linux-arm-kernel
Ping
On 2016?09?07? 19:46, Andy Yan wrote:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index eadf485..427b6dc 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -222,6 +222,7 @@ CONFIG_I2C_QUP=y
> CONFIG_I2C_TEGRA=y
> CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> +CONFIG_I2C_RK3X=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> CONFIG_SPI_ORION=y
> @@ -323,6 +324,7 @@ CONFIG_MMC_SPI=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_EXYNOS=y
> CONFIG_MMC_DW_K3=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SUNXI=y
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
2016-09-07 11:46 ` Andy Yan
@ 2016-11-17 15:55 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2016-11-17 15:55 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Andy Yan, arnd, kuninori.morimoto.gx, catalin.marinas,
riku.voipio, will.deacon, linux-kernel, krzk,
srinivas.kandagatla, alim.akhtar, horms+renesas, treding,
shawn.lin
Am Mittwoch, 7. September 2016, 19:46:30 CET schrieb Andy Yan:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
applied to a defconfig64 branch, after moving I2C_RK3X between QUP and TEGRA
RCAR seems to be an exception to the otherwise alphabetically sorted list.
Heiko
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
@ 2016-11-17 15:55 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2016-11-17 15:55 UTC (permalink / raw)
To: linux-arm-kernel
Am Mittwoch, 7. September 2016, 19:46:30 CET schrieb Andy Yan:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
applied to a defconfig64 branch, after moving I2C_RK3X between QUP and TEGRA
RCAR seems to be an exception to the otherwise alphabetically sorted list.
Heiko
^ permalink raw reply [flat|nested] 12+ messages in thread