* [PATCH v3 0/5] MMC fixes for TI K3 platforms
@ 2024-04-23 15:17 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
This patch series includes MMC updates for various TI K3 platforms.
It includes support for enabling UHS/SDR104 bus modes.
For AM62ax, add missing UHS support.
For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
in SDHCI nodes.
Changes since v2:
- Drop patch 6/6
Changes since v1:
- Drop patches that remove HS400 mode support
- Add patch 6/6
Bhavya Kapoor (1):
arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
Dasnavis Sabiya (1):
arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
Judith Mendez (2):
arm64: dts: ti: k3-am65-main: Fix sdhci node properties
arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
Vignesh Raghavendra (1):
arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 21 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 26 +++++++++-------------
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 2 --
5 files changed, 32 insertions(+), 21 deletions(-)
base-commit: 534ad093bb80f19c20b251a89f09ce1a0e3d4f2d
--
2.43.2
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 0/5] MMC fixes for TI K3 platforms
@ 2024-04-23 15:17 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
This patch series includes MMC updates for various TI K3 platforms.
It includes support for enabling UHS/SDR104 bus modes.
For AM62ax, add missing UHS support.
For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
in SDHCI nodes.
Changes since v2:
- Drop patch 6/6
Changes since v1:
- Drop patches that remove HS400 mode support
- Add patch 6/6
Bhavya Kapoor (1):
arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
Dasnavis Sabiya (1):
arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
Judith Mendez (2):
arm64: dts: ti: k3-am65-main: Fix sdhci node properties
arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
Vignesh Raghavendra (1):
arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 21 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 26 +++++++++-------------
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 2 --
5 files changed, 32 insertions(+), 21 deletions(-)
base-commit: 534ad093bb80f19c20b251a89f09ce1a0e3d4f2d
--
2.43.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 1/5] arm64: dts: ti: k3-am65-main: Fix sdhci node properties
2024-04-23 15:17 ` Judith Mendez
@ 2024-04-23 15:17 ` Judith Mendez
-1 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
Update otap-del-sel properties as per datasheet [0].
Add missing clkbuf-sel and itap-del-sel values also as per
datasheet [0].
Move clkbuf-sel and ti,trm-icp above the otap-del-sel properties
so the sdhci nodes could be more uniform across platforms.
[0] https://www.ti.com/lit/ds/symlink/am6548.pdf
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Fixes: d7600d070fb0 ("arm64: dts: ti: k3-am65-main: Add support for sdhci1")
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 670557c89f756..0803a8b9bfe84 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -435,6 +435,8 @@ sdhci0: mmc@4f80000 {
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -445,8 +447,7 @@ sdhci0: mmc@4f80000 {
ti,otap-del-sel-ddr50 = <0x5>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x5>;
- ti,otap-del-sel-hs400 = <0x0>;
- ti,trm-icp = <0x8>;
+ ti,itap-del-sel-ddr52 = <0x0>;
dma-coherent;
status = "disabled";
};
@@ -458,18 +459,22 @@ sdhci1: mmc@4fa0000 {
clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
clock-names = "clk_ahb", "clk_xin";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0x8>;
ti,otap-del-sel-sdr104 = <0x7>;
ti,otap-del-sel-ddr50 = <0x4>;
ti,otap-del-sel-ddr52 = <0x4>;
ti,otap-del-sel-hs200 = <0x7>;
- ti,clkbuf-sel = <0x7>;
- ti,trm-icp = <0x8>;
+ ti,itap-del-sel-legacy = <0xa>;
+ ti,itap-del-sel-sd-hs = <0x1>;
+ ti,itap-del-sel-sdr12 = <0xa>;
+ ti,itap-del-sel-sdr25 = <0x1>;
dma-coherent;
status = "disabled";
};
--
2.43.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 1/5] arm64: dts: ti: k3-am65-main: Fix sdhci node properties
@ 2024-04-23 15:17 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
Update otap-del-sel properties as per datasheet [0].
Add missing clkbuf-sel and itap-del-sel values also as per
datasheet [0].
Move clkbuf-sel and ti,trm-icp above the otap-del-sel properties
so the sdhci nodes could be more uniform across platforms.
[0] https://www.ti.com/lit/ds/symlink/am6548.pdf
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Fixes: d7600d070fb0 ("arm64: dts: ti: k3-am65-main: Add support for sdhci1")
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 670557c89f756..0803a8b9bfe84 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -435,6 +435,8 @@ sdhci0: mmc@4f80000 {
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
@@ -445,8 +447,7 @@ sdhci0: mmc@4f80000 {
ti,otap-del-sel-ddr50 = <0x5>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x5>;
- ti,otap-del-sel-hs400 = <0x0>;
- ti,trm-icp = <0x8>;
+ ti,itap-del-sel-ddr52 = <0x0>;
dma-coherent;
status = "disabled";
};
@@ -458,18 +459,22 @@ sdhci1: mmc@4fa0000 {
clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
clock-names = "clk_ahb", "clk_xin";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0x8>;
ti,otap-del-sel-sdr104 = <0x7>;
ti,otap-del-sel-ddr50 = <0x4>;
ti,otap-del-sel-ddr52 = <0x4>;
ti,otap-del-sel-hs200 = <0x7>;
- ti,clkbuf-sel = <0x7>;
- ti,trm-icp = <0x8>;
+ ti,itap-del-sel-legacy = <0xa>;
+ ti,itap-del-sel-sd-hs = <0x1>;
+ ti,itap-del-sel-sdr12 = <0xa>;
+ ti,itap-del-sel-sdr25 = <0x1>;
dma-coherent;
status = "disabled";
};
--
2.43.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 2/5] arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
2024-04-23 15:17 ` Judith Mendez
@ 2024-04-23 15:17 ` Judith Mendez
-1 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
On AM65x platform, sdhci0 is for eMMC and sdhci1 is for SD.
Remove the properties that are not applicable for each device.
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Fixes: d7600d070fb0 ("arm64: dts: ti: k3-am65-main: Add support for sdhci1")
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 0803a8b9bfe84..127f581a56bc6 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -439,12 +439,6 @@ sdhci0: mmc@4f80000 {
ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
- ti,otap-del-sel-sdr50 = <0x8>;
- ti,otap-del-sel-sdr104 = <0x7>;
- ti,otap-del-sel-ddr50 = <0x5>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x5>;
ti,itap-del-sel-ddr52 = <0x0>;
@@ -462,15 +456,12 @@ sdhci1: mmc@4fa0000 {
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0x8>;
ti,otap-del-sel-sdr104 = <0x7>;
ti,otap-del-sel-ddr50 = <0x4>;
- ti,otap-del-sel-ddr52 = <0x4>;
- ti,otap-del-sel-hs200 = <0x7>;
ti,itap-del-sel-legacy = <0xa>;
ti,itap-del-sel-sd-hs = <0x1>;
ti,itap-del-sel-sdr12 = <0xa>;
--
2.43.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 2/5] arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
@ 2024-04-23 15:17 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
On AM65x platform, sdhci0 is for eMMC and sdhci1 is for SD.
Remove the properties that are not applicable for each device.
Fixes: eac99d38f861 ("arm64: dts: ti: k3-am654-main: Update otap-del-sel values")
Fixes: d7600d070fb0 ("arm64: dts: ti: k3-am65-main: Add support for sdhci1")
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 0803a8b9bfe84..127f581a56bc6 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -439,12 +439,6 @@ sdhci0: mmc@4f80000 {
ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-sd-hs = <0x0>;
- ti,otap-del-sel-sdr12 = <0x0>;
- ti,otap-del-sel-sdr25 = <0x0>;
- ti,otap-del-sel-sdr50 = <0x8>;
- ti,otap-del-sel-sdr104 = <0x7>;
- ti,otap-del-sel-ddr50 = <0x5>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x5>;
ti,itap-del-sel-ddr52 = <0x0>;
@@ -462,15 +456,12 @@ sdhci1: mmc@4fa0000 {
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0x8>;
ti,otap-del-sel-sdr104 = <0x7>;
ti,otap-del-sel-ddr50 = <0x4>;
- ti,otap-del-sel-ddr52 = <0x4>;
- ti,otap-del-sel-hs200 = <0x7>;
ti,itap-del-sel-legacy = <0xa>;
ti,itap-del-sel-sd-hs = <0x1>;
ti,itap-del-sel-sdr12 = <0xa>;
--
2.43.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 3/5] arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
2024-04-23 15:17 ` Judith Mendez
@ 2024-04-23 15:17 ` Judith Mendez
-1 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
From: Vignesh Raghavendra <vigneshr@ti.com>
Hook up required IO voltage regulators and drop no-1-8-v to support UHS
modes on SD cards.
Fixes: 5fc6b1b62639 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[Judith: Remove no-1-8-v for sdhci2, keep otap-del-sel-legacy=0,
add fixes tag, reword commit]
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 21 +++++++++++++++++++++
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index aa1e057082f08..6652701d3e3b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -573,7 +573,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
status = "disabled";
};
@@ -597,7 +596,6 @@ sdhci2: mmc@fa20000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f241637a5642a..fa43cd0b631e6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -113,6 +113,20 @@ vcc_3v3_sys: regulator-4 {
regulator-boot-on;
};
+ vddshv_sdio: regulator-5 {
+ compatible = "regulator-gpio";
+ regulator-name = "vddshv_sdio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vddshv_sdio_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&ldo1>;
+ gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -342,6 +356,12 @@ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
>;
};
+
+ vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
+ >;
+ };
};
&mcu_pmx0 {
@@ -580,6 +600,7 @@ &sdhci1 {
/* SD/MMC */
status = "okay";
vmmc-supply = <&vdd_mmc1>;
+ vqmmc-supply = <&vddshv_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
--
2.43.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 3/5] arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
@ 2024-04-23 15:17 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
From: Vignesh Raghavendra <vigneshr@ti.com>
Hook up required IO voltage regulators and drop no-1-8-v to support UHS
modes on SD cards.
Fixes: 5fc6b1b62639 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[Judith: Remove no-1-8-v for sdhci2, keep otap-del-sel-legacy=0,
add fixes tag, reword commit]
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 21 +++++++++++++++++++++
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index aa1e057082f08..6652701d3e3b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -573,7 +573,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
status = "disabled";
};
@@ -597,7 +596,6 @@ sdhci2: mmc@fa20000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- no-1-8-v;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f241637a5642a..fa43cd0b631e6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -113,6 +113,20 @@ vcc_3v3_sys: regulator-4 {
regulator-boot-on;
};
+ vddshv_sdio: regulator-5 {
+ compatible = "regulator-gpio";
+ regulator-name = "vddshv_sdio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vddshv_sdio_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&ldo1>;
+ gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -342,6 +356,12 @@ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
>;
};
+
+ vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
+ >;
+ };
};
&mcu_pmx0 {
@@ -580,6 +600,7 @@ &sdhci1 {
/* SD/MMC */
status = "okay";
vmmc-supply = <&vdd_mmc1>;
+ vqmmc-supply = <&vddshv_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
--
2.43.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 4/5] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
2024-04-23 15:17 ` Judith Mendez
@ 2024-04-23 15:17 ` Judith Mendez
-1 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
From: Bhavya Kapoor <b-kapoor@ti.com>
According to TRM for J721S2, SDR104 speed mode is supported by the SoC
but its capabilities were masked in device tree. Remove sdhci-caps-mask
to enable support for SDR104 speed mode for SD card in J721S2 SoC.
[+] Refer to : section 12.3.6.1.1 MMCSD Features, in J721S2 TRM
- https://www.ti.com/lit/zip/spruj28
Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 3cb06a7e4117f..9ed6949b40e9d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -768,8 +768,6 @@ main_sdhci1: mmc@4fb0000 {
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
- /* Masking support for SDR104 capability */
- sdhci-caps-mask = <0x00000003 0x00000000>;
status = "disabled";
};
--
2.43.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 4/5] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
@ 2024-04-23 15:17 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
From: Bhavya Kapoor <b-kapoor@ti.com>
According to TRM for J721S2, SDR104 speed mode is supported by the SoC
but its capabilities were masked in device tree. Remove sdhci-caps-mask
to enable support for SDR104 speed mode for SD card in J721S2 SoC.
[+] Refer to : section 12.3.6.1.1 MMCSD Features, in J721S2 TRM
- https://www.ti.com/lit/zip/spruj28
Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 3cb06a7e4117f..9ed6949b40e9d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -768,8 +768,6 @@ main_sdhci1: mmc@4fb0000 {
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
- /* Masking support for SDR104 capability */
- sdhci-caps-mask = <0x00000003 0x00000000>;
status = "disabled";
};
--
2.43.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 5/5] arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
2024-04-23 15:17 ` Judith Mendez
@ 2024-04-23 15:17 ` Judith Mendez
-1 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
From: Dasnavis Sabiya <sabiya.d@ti.com>
Remove sdhci-caps-mask to enable support for SDR104 speed mode for
SD card and remove no-1-8-v property so that SD card can work in
any UHS-1 high speed mode it can support.
Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[Judith: Add fixes tag]
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index d42f25cacf23d..6a4554c6c9c13 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -904,8 +904,6 @@ main_sdhci1: mmc@4fb0000 {
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
- sdhci-caps-mask = <0x00000003 0x00000000>;
- no-1-8-v;
status = "disabled";
};
--
2.43.2
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 5/5] arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
@ 2024-04-23 15:17 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-23 15:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
From: Dasnavis Sabiya <sabiya.d@ti.com>
Remove sdhci-caps-mask to enable support for SDR104 speed mode for
SD card and remove no-1-8-v property so that SD card can work in
any UHS-1 high speed mode it can support.
Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[Judith: Add fixes tag]
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- no change
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index d42f25cacf23d..6a4554c6c9c13 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -904,8 +904,6 @@ main_sdhci1: mmc@4fb0000 {
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
- sdhci-caps-mask = <0x00000003 0x00000000>;
- no-1-8-v;
status = "disabled";
};
--
2.43.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH v3 0/5] MMC fixes for TI K3 platforms
2024-04-23 15:17 ` Judith Mendez
@ 2024-04-26 22:42 ` Nishanth Menon
-1 siblings, 0 replies; 18+ messages in thread
From: Nishanth Menon @ 2024-04-26 22:42 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Judith Mendez
Cc: Nishanth Menon, Conor Dooley, linux-arm-kernel, devicetree,
linux-kernel, Bhavya Kapoor, Dasnavis Sabiya,
Vignesh Raghavendra
Hi Judith Mendez,
On Tue, 23 Apr 2024 10:17:27 -0500, Judith Mendez wrote:
> This patch series includes MMC updates for various TI K3 platforms.
>
> It includes support for enabling UHS/SDR104 bus modes.
>
> For AM62ax, add missing UHS support.
>
> For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
> in SDHCI nodes.
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/5] arm64: dts: ti: k3-am65-main: Fix sdhci node properties
commit: 9853d5fc6b33d77de20308a9facf1ac0b4ac3347
[2/5] arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
commit: 0c6ad2fed244c393e8c19edafde324a01b7d8c1b
[3/5] arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
commit: 8fea8069313c3a77e075a353edbc5b212e07303c
[4/5] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
commit: 7e484938110c00e9d27413e04200ffa94ec16b55
[5/5] arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
commit: 2396b640f82da528bc3fcbcfdbd240091ff405e1
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 0/5] MMC fixes for TI K3 platforms
@ 2024-04-26 22:42 ` Nishanth Menon
0 siblings, 0 replies; 18+ messages in thread
From: Nishanth Menon @ 2024-04-26 22:42 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Judith Mendez
Cc: Nishanth Menon, Conor Dooley, linux-arm-kernel, devicetree,
linux-kernel, Bhavya Kapoor, Dasnavis Sabiya,
Vignesh Raghavendra
Hi Judith Mendez,
On Tue, 23 Apr 2024 10:17:27 -0500, Judith Mendez wrote:
> This patch series includes MMC updates for various TI K3 platforms.
>
> It includes support for enabling UHS/SDR104 bus modes.
>
> For AM62ax, add missing UHS support.
>
> For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
> in SDHCI nodes.
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/5] arm64: dts: ti: k3-am65-main: Fix sdhci node properties
commit: 9853d5fc6b33d77de20308a9facf1ac0b4ac3347
[2/5] arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
commit: 0c6ad2fed244c393e8c19edafde324a01b7d8c1b
[3/5] arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
commit: 8fea8069313c3a77e075a353edbc5b212e07303c
[4/5] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
commit: 7e484938110c00e9d27413e04200ffa94ec16b55
[5/5] arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
commit: 2396b640f82da528bc3fcbcfdbd240091ff405e1
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 0/5] MMC fixes for TI K3 platforms
2024-04-23 15:17 ` Judith Mendez
@ 2024-04-30 17:26 ` Judith Mendez
-1 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-30 17:26 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Nishanth, Menon
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
On 4/23/24 10:17 AM, Judith Mendez wrote:
> This patch series includes MMC updates for various TI K3 platforms.
>
> It includes support for enabling UHS/SDR104 bus modes.
>
> For AM62ax, add missing UHS support.
>
> For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
> in SDHCI nodes.
Please do not merge this series, will send a update v4.
~ Judith
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 0/5] MMC fixes for TI K3 platforms
@ 2024-04-30 17:26 ` Judith Mendez
0 siblings, 0 replies; 18+ messages in thread
From: Judith Mendez @ 2024-04-30 17:26 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Nishanth, Menon
Cc: Conor Dooley, linux-arm-kernel, devicetree, linux-kernel,
Bhavya Kapoor, Dasnavis Sabiya, Vignesh Raghavendra
On 4/23/24 10:17 AM, Judith Mendez wrote:
> This patch series includes MMC updates for various TI K3 platforms.
>
> It includes support for enabling UHS/SDR104 bus modes.
>
> For AM62ax, add missing UHS support.
>
> For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
> in SDHCI nodes.
Please do not merge this series, will send a update v4.
~ Judith
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 0/5] MMC fixes for TI K3 platforms
2024-04-30 17:26 ` Judith Mendez
@ 2024-04-30 19:54 ` Nishanth Menon
-1 siblings, 0 replies; 18+ messages in thread
From: Nishanth Menon @ 2024-04-30 19:54 UTC (permalink / raw)
To: Judith Mendez
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Bhavya Kapoor, Dasnavis Sabiya,
Vignesh Raghavendra
On 12:26-20240430, Judith Mendez wrote:
> On 4/23/24 10:17 AM, Judith Mendez wrote:
> > This patch series includes MMC updates for various TI K3 platforms.
> >
> > It includes support for enabling UHS/SDR104 bus modes.
> >
> > For AM62ax, add missing UHS support.
> >
> > For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
> > in SDHCI nodes.
>
> Please do not merge this series, will send a update v4.
Judith: after discussing offline, I do not see a problem with the
series. The defconfig patch can be send separately (probably next
cycle) - you do not really need to resubmit the complete series again.
- for current users initrd isn't broken anyways.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 0/5] MMC fixes for TI K3 platforms
@ 2024-04-30 19:54 ` Nishanth Menon
0 siblings, 0 replies; 18+ messages in thread
From: Nishanth Menon @ 2024-04-30 19:54 UTC (permalink / raw)
To: Judith Mendez
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Bhavya Kapoor, Dasnavis Sabiya,
Vignesh Raghavendra
On 12:26-20240430, Judith Mendez wrote:
> On 4/23/24 10:17 AM, Judith Mendez wrote:
> > This patch series includes MMC updates for various TI K3 platforms.
> >
> > It includes support for enabling UHS/SDR104 bus modes.
> >
> > For AM62ax, add missing UHS support.
> >
> > For AM65x, fix ITAP delay and OTAP delay and clkbuf-sel properties
> > in SDHCI nodes.
>
> Please do not merge this series, will send a update v4.
Judith: after discussing offline, I do not see a problem with the
series. The defconfig patch can be send separately (probably next
cycle) - you do not really need to resubmit the complete series again.
- for current users initrd isn't broken anyways.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2024-04-30 19:55 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-23 15:17 [PATCH v3 0/5] MMC fixes for TI K3 platforms Judith Mendez
2024-04-23 15:17 ` Judith Mendez
2024-04-23 15:17 ` [PATCH v3 1/5] arm64: dts: ti: k3-am65-main: Fix sdhci node properties Judith Mendez
2024-04-23 15:17 ` Judith Mendez
2024-04-23 15:17 ` [PATCH v3 2/5] arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes Judith Mendez
2024-04-23 15:17 ` Judith Mendez
2024-04-23 15:17 ` [PATCH v3 3/5] arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards Judith Mendez
2024-04-23 15:17 ` Judith Mendez
2024-04-23 15:17 ` [PATCH v3 4/5] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode Judith Mendez
2024-04-23 15:17 ` Judith Mendez
2024-04-23 15:17 ` [PATCH v3 5/5] arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode Judith Mendez
2024-04-23 15:17 ` Judith Mendez
2024-04-26 22:42 ` [PATCH v3 0/5] MMC fixes for TI K3 platforms Nishanth Menon
2024-04-26 22:42 ` Nishanth Menon
2024-04-30 17:26 ` Judith Mendez
2024-04-30 17:26 ` Judith Mendez
2024-04-30 19:54 ` Nishanth Menon
2024-04-30 19:54 ` Nishanth Menon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.