[PATCH v2] wifi: carl9170: add a proper sanity check for endpoints

* [PATCH v2] wifi: carl9170: add a proper sanity check for endpoints
@ 2024-04-22 18:33 Nikita Zhandarovich
  2024-04-25 20:37 ` Christian Lamparter
  2024-04-29 17:07 ` Kalle Valo
  0 siblings, 2 replies; 5+ messages in thread
From: Nikita Zhandarovich @ 2024-04-22 18:33 UTC (permalink / raw)
  To: Christian Lamparter, Kalle Valo
  Cc: Nikita Zhandarovich, linux-wireless, linux-kernel,
	syzkaller-bugs, lvc-project, syzbot+0ae4804973be759fa420

Syzkaller reports [1] hitting a warning which is caused by presence
of a wrong endpoint type at the URB sumbitting stage. While there
was a check for a specific 4th endpoint, since it can switch types
between bulk and interrupt, other endpoints are trusted implicitly.
Similar warning is triggered in a couple of other syzbot issues [2].

Fix the issue by doing a comprehensive check of all endpoints
taking into account difference between high- and full-speed
configuration.

This patch has not been tested on real hardware.

[1] Syzkaller report:
...
WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
 <TASK>
 carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504
 carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline]
 carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline]
 carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028
 request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x669/0x1090 kernel/workqueue.c:2436
 kthread+0x2e8/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
 </TASK>

[2] Related syzkaller crashes:
Link: https://syzkaller.appspot.com/bug?extid=e394db78ae0b0032cb4d
Link: https://syzkaller.appspot.com/bug?extid=9468df99cb63a4a4c4e1

Reported-and-tested-by: syzbot+0ae4804973be759fa420@syzkaller.appspotmail.com
Fixes: a84fab3cbfdc ("carl9170: 802.11 rx/tx processing and usb backend")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
---
v2: as Christian Lamparter <chunkeey@gmail.com> was kind to point out,
before returning with error, make sure to free previously allocated
'ar' with carl9170_free(ar).

 drivers/net/wireless/ath/carl9170/usb.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index c4edf8355941..a3e03580cd9f 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -1069,6 +1069,38 @@ static int carl9170_usb_probe(struct usb_interface *intf,
 			ar->usb_ep_cmd_is_bulk = true;
 	}
 
+	/* Verify that all expected endpoints are present */
+	if (ar->usb_ep_cmd_is_bulk) {
+		u8 bulk_ep_addr[] = {
+			AR9170_USB_EP_RX | USB_DIR_IN,
+			AR9170_USB_EP_TX | USB_DIR_OUT,
+			AR9170_USB_EP_CMD | USB_DIR_OUT,
+			0};
+		u8 int_ep_addr[] = {
+			AR9170_USB_EP_IRQ | USB_DIR_IN,
+			0};
+		if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
+		    !usb_check_int_endpoints(intf, int_ep_addr))
+			err = -ENODEV;
+	} else {
+		u8 bulk_ep_addr[] = {
+			AR9170_USB_EP_RX | USB_DIR_IN,
+			AR9170_USB_EP_TX | USB_DIR_OUT,
+			0};
+		u8 int_ep_addr[] = {
+			AR9170_USB_EP_IRQ | USB_DIR_IN,
+			AR9170_USB_EP_CMD | USB_DIR_OUT,
+			0};
+		if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
+		    !usb_check_int_endpoints(intf, int_ep_addr))
+			err = -ENODEV;
+	}
+
+	if (err) {
+		carl9170_free(ar);
+		return err;
+	}
+
 	usb_set_intfdata(intf, ar);
 	SET_IEEE80211_DEV(ar->hw, &intf->dev);
 

^ permalink raw reply related	[flat|nested] 5+ messages in thread