* [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
@ 2017-02-21 9:06 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:06 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
Hi,
Next version if the bcm2835 sdhost patch series.
New in v3:
* squashed in cleanups by Stefan.
* use one dma channel only.
* improve commit messages.
New in v2:
* DMA fixed.
* updated docs (kconfig, file comment, commit message) clarifying
the two sd controller situation.
* some code cleanups, as pointed out by Stefan.
* dt bindings use mmc@... now.
* added patches to update defconfigs.
* added patch for rpi3 device tree, so wifi is actually enabled.
please review & test,
Gerd
Eric Anholt (2):
dt-bindings: Add binding for brcm,bcm2835-sdhost.
mmc: bcm2835: Add new driver for the sdhost controller.
Gerd Hoffmann (5):
mmc: bcm2835: add sdhost controller to devicetree
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and
multi_v7_defconfig
arm64: set CONFIG_MMC_BCM2835=y in defconfig
ARM: dts: bcm283x: switch from &sdhci to &sdhost
ARM: dts: bcm2837: add &sdhci and &sdhost
.../bindings/mmc/brcm,bcm2835-sdhost.txt | 23 +
arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 +
arch/arm/boot/dts/bcm283x.dtsi | 10 +
arch/arm/configs/bcm2835_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +
arch/arm64/configs/defconfig | 1 +
drivers/mmc/host/Kconfig | 14 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/bcm2835.c | 1471 ++++++++++++++++++++
10 files changed, 1545 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
create mode 100644 drivers/mmc/host/bcm2835.c
--
1.8.3.1
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
@ 2017-02-21 9:06 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:06 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Next version if the bcm2835 sdhost patch series.
New in v3:
* squashed in cleanups by Stefan.
* use one dma channel only.
* improve commit messages.
New in v2:
* DMA fixed.
* updated docs (kconfig, file comment, commit message) clarifying
the two sd controller situation.
* some code cleanups, as pointed out by Stefan.
* dt bindings use mmc at ... now.
* added patches to update defconfigs.
* added patch for rpi3 device tree, so wifi is actually enabled.
please review & test,
Gerd
Eric Anholt (2):
dt-bindings: Add binding for brcm,bcm2835-sdhost.
mmc: bcm2835: Add new driver for the sdhost controller.
Gerd Hoffmann (5):
mmc: bcm2835: add sdhost controller to devicetree
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and
multi_v7_defconfig
arm64: set CONFIG_MMC_BCM2835=y in defconfig
ARM: dts: bcm283x: switch from &sdhci to &sdhost
ARM: dts: bcm2837: add &sdhci and &sdhost
.../bindings/mmc/brcm,bcm2835-sdhost.txt | 23 +
arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 +
arch/arm/boot/dts/bcm283x.dtsi | 10 +
arch/arm/configs/bcm2835_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +
arch/arm64/configs/defconfig | 1 +
drivers/mmc/host/Kconfig | 14 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/bcm2835.c | 1471 ++++++++++++++++++++
10 files changed, 1545 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
create mode 100644 drivers/mmc/host/bcm2835.c
--
1.8.3.1
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 1/7] dt-bindings: Add binding for brcm,bcm2835-sdhost.
2017-02-21 9:06 ` Gerd Hoffmann
@ 2017-02-21 9:07 ` Gerd Hoffmann
-1 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
From: Eric Anholt <eric@anholt.net>
This is the other SD controller on the platform, which can be swapped
to the role of SD card host using pin muxing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/mmc/brcm,bcm2835-sdhost.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
new file mode 100644
index 0000000..d876580
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
@@ -0,0 +1,23 @@
+Broadcom BCM2835 SDHOST controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the BCM2835 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-sdhost".
+- clocks: The clock feeding the SDHOST controller.
+
+Optional properties:
+- dmas: DMA channel for read and write.
+ See Documentation/devicetree/bindings/dma/dma.txt for details
+
+Example:
+
+sdhost: mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 1/7] dt-bindings: Add binding for brcm,bcm2835-sdhost.
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Eric Anholt <eric@anholt.net>
This is the other SD controller on the platform, which can be swapped
to the role of SD card host using pin muxing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/mmc/brcm,bcm2835-sdhost.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
new file mode 100644
index 0000000..d876580
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
@@ -0,0 +1,23 @@
+Broadcom BCM2835 SDHOST controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the BCM2835 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-sdhost".
+- clocks: The clock feeding the SDHOST controller.
+
+Optional properties:
+- dmas: DMA channel for read and write.
+ See Documentation/devicetree/bindings/dma/dma.txt for details
+
+Example:
+
+sdhost: mmc at 7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
2017-02-21 9:06 ` Gerd Hoffmann
@ 2017-02-21 9:07 ` Gerd Hoffmann
-1 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
From: Eric Anholt <eric@anholt.net>
The 2835 has two SD controllers: The Arasan sdhci controller (supported
by the iproc driver) and a custom sdhost controller. This patch adds a
driver for the latter.
The sdhci controller supports both sdcard and sdio. The sdhost
controller supports the sdcard only, but has better performance. Also
note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
controller allows to use the sdhci controller for wifi support.
The configuration is done by devicetree via pin muxing. Both SD
controller are available on the same pins (2 pin groups = pin 22 to 27 +
pin 48 to 53). So it's possible to use both SD controllers at the same
time with different pin groups.
The code was originally written by Phil Elwell in the downstream
Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
out of the original 2055) for inclusion.
Signed-off-by: Eric Anholt <eric@anholt.net>
cleanups by Gerd Hoffmann
mmc: bcm2835: zap mmiowb()
mmc: bcm2835: reset tweaks.
mmc: bcm2835: more reset tweaks.
mmc: bcm2835: rename bcm2835_sdhost to bcm2835
mmc: bcm2835: whitespace & comment style
mmc: bcm2835: zap bcm2835_write
mmc: bcm2835: zap bcm2835_read
mmc: bcm2835: zap bcm2835_read_relaxed
mmc: bcm2835: zap bcm2835_set_ios fwd decl
mmc: bcm2835: use dev_dbg()
mmc: bcm2835: use dev_err()
mmc: bcm2835: use dev_warn() + dev_into()
cleanups by Stefan Wahren
mmc: bcm2835: Fix checkpatch.pl warning
mmc: bcm2835: replace spaces with tabs
mmc: bcm2835: remove bcm2835_set_power
mmc: bcm2835: remove bcm2835_init()
mmc: bcm2835: Avoid separate init statement
mmc: bcm2835: Use local device ptr to make code more compact
mmc: bcm2835: Use local ptr to make code more compact
mmc: bcm2835: Use __func__ macro
mmc: bcm2835: sort includes alphabetical
mmc: bcm2835: fix includes
mmc: bcm2835: refactor bcm2835_wait_transfer_complete()
mmc: bcm2835: Handle error case of of_get_address
mmc: bcm2835: Use MMC_SEND_OP_COND instead of number
mmc: bcm2835: Rearrange mmc capabilities
mmc: bcm2835: Add missing include for threaded irq
mmc: bcm2835: Remove CMD_DALLY_US
mmc: bcm2835: Fix pio_timeout handling
mmc: bcm2835: Remove unnecessary return in bcm2835_data_irq
mmc: bcm2835: Handle error cases during probe
mmc: bcm2835: Print clk_max as decimal
mmc: bcm2835: Downrate message in case of PIO fallback
mmc: bcm2835: Don't unveil the data pointer
mmc: bcm2835: remove unused host members
mmc: bcm2835: Avoid unnecessary linebreaks
mmc: bcm2835: Add leading zero to register dumps
mmc: bcm2835: Align struct members with tabs
mmc: bcm2835: Rearrange bcm2835_finish_request()
mmc: bcm2835: Rearrange bcm2835_dma_complete_work()
mmc: bcm2835: Rename Kconfig switch
mmc: bcm2835: replace pio_limit with define
mmc: bcm2835: Increase max_blk_size to 1024
mmc: bcm2835: make internal functions static
mmc: bcm2835: reduce variable scope within bcm2835_transfer_block_pio
mmc: bcm2835: simplify burst words calculation
mmc: bcm2835: remove unnecessary debug messages
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
driver modernizations:
* run most driver code in thread context.
- use threaded irq handler.
- schedule worker for timeout handling.
* use mutex for locking, so we can easily sleep.
* simplify poll/wait code, drop tasklet and work queue.
* fix DMA support.
* use only one dma channel (port from downstream)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
drivers/mmc/host/Kconfig | 14 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/bcm2835.c | 1471 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1486 insertions(+)
create mode 100644 drivers/mmc/host/bcm2835.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 2eb9701..7fabd2538 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -790,6 +790,20 @@ config MMC_TOSHIBA_PCI
depends on PCI
help
+config MMC_BCM2835
+ tristate "Broadcom BCM2835 SDHOST MMC Controller support"
+ depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on HAS_DMA
+ help
+ This selects the BCM2835 SDHOST MMC controller. If you have
+ a BCM2835 platform with SD or MMC devices, say Y or M here.
+
+ Note that the BCM2835 has two SD controllers: The Arasan
+ sdhci controller (supported by MMC_SDHCI_IPROC) and a custom
+ sdhost controller (supported by this driver).
+
+ If unsure, say N.
+
config MMC_MTK
tristate "MediaTek SD/MMC Card Interface support"
depends on HAS_DMA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index ccc9c4c..1a8fbab 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o
+obj-$(CONFIG_MMC_BCM2835) += bcm2835.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
new file mode 100644
index 0000000..90b93d6
--- /dev/null
+++ b/drivers/mmc/host/bcm2835.c
@@ -0,0 +1,1471 @@
+/*
+ * bcm2835 sdhost driver.
+ *
+ * The 2835 has two SD controllers: The Arasan sdhci controller
+ * (supported by the iproc driver) and a custom sdhost controller
+ * (supported by this driver).
+ *
+ * The sdhci controller supports both sdcard and sdio. The sdhost
+ * controller supports the sdcard only, but has better performance.
+ * Also note that the rpi3 has sdio wifi, so driving the sdcard with
+ * the sdhost controller allows to use the sdhci controller for wifi
+ * support.
+ *
+ * The configuration is done by devicetree via pin muxing. Both
+ * SD controller are available on the same pins (2 pin groups = pin 22
+ * to 27 + pin 48 to 53). So it's possible to use both SD controllers
+ * at the same time with different pin groups.
+ *
+ * Author: Phil Elwell <phil@raspberrypi.org>
+ * Copyright (C) 2015-2016 Raspberry Pi (Trading) Ltd.
+ *
+ * Based on
+ * mmc-bcm2835.c by Gellert Weisz
+ * which is, in turn, based on
+ * sdhci-bcm2708.c by Broadcom
+ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko
+ * sdhci.c and sdhci-pci.c by Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+
+#define SDCMD 0x00 /* Command to SD card - 16 R/W */
+#define SDARG 0x04 /* Argument to SD card - 32 R/W */
+#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */
+#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */
+#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */
+#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */
+#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */
+#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */
+#define SDHSTS 0x20 /* SD host status - 11 R */
+#define SDVDD 0x30 /* SD card power control - 1 R/W */
+#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */
+#define SDHCFG 0x38 /* Host configuration - 2 R/W */
+#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */
+#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */
+#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */
+
+#define SDCMD_NEW_FLAG 0x8000
+#define SDCMD_FAIL_FLAG 0x4000
+#define SDCMD_BUSYWAIT 0x800
+#define SDCMD_NO_RESPONSE 0x400
+#define SDCMD_LONG_RESPONSE 0x200
+#define SDCMD_WRITE_CMD 0x80
+#define SDCMD_READ_CMD 0x40
+#define SDCMD_CMD_MASK 0x3f
+
+#define SDCDIV_MAX_CDIV 0x7ff
+
+#define SDHSTS_BUSY_IRPT 0x400
+#define SDHSTS_BLOCK_IRPT 0x200
+#define SDHSTS_SDIO_IRPT 0x100
+#define SDHSTS_REW_TIME_OUT 0x80
+#define SDHSTS_CMD_TIME_OUT 0x40
+#define SDHSTS_CRC16_ERROR 0x20
+#define SDHSTS_CRC7_ERROR 0x10
+#define SDHSTS_FIFO_ERROR 0x08
+/* Reserved */
+/* Reserved */
+#define SDHSTS_DATA_FLAG 0x01
+
+#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR | \
+ SDHSTS_CRC16_ERROR | \
+ SDHSTS_REW_TIME_OUT | \
+ SDHSTS_FIFO_ERROR)
+
+#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT | \
+ SDHSTS_TRANSFER_ERROR_MASK)
+
+#define SDHCFG_BUSY_IRPT_EN BIT(10)
+#define SDHCFG_BLOCK_IRPT_EN BIT(8)
+#define SDHCFG_SDIO_IRPT_EN BIT(5)
+#define SDHCFG_DATA_IRPT_EN BIT(4)
+#define SDHCFG_SLOW_CARD BIT(3)
+#define SDHCFG_WIDE_EXT_BUS BIT(2)
+#define SDHCFG_WIDE_INT_BUS BIT(1)
+#define SDHCFG_REL_CMD_LINE BIT(0)
+
+#define SDVDD_POWER_OFF 0
+#define SDVDD_POWER_ON 1
+
+#define SDEDM_FORCE_DATA_MODE BIT(19)
+#define SDEDM_CLOCK_PULSE BIT(20)
+#define SDEDM_BYPASS BIT(21)
+
+#define SDEDM_WRITE_THRESHOLD_SHIFT 9
+#define SDEDM_READ_THRESHOLD_SHIFT 14
+#define SDEDM_THRESHOLD_MASK 0x1f
+
+#define SDEDM_FSM_MASK 0xf
+#define SDEDM_FSM_IDENTMODE 0x0
+#define SDEDM_FSM_DATAMODE 0x1
+#define SDEDM_FSM_READDATA 0x2
+#define SDEDM_FSM_WRITEDATA 0x3
+#define SDEDM_FSM_READWAIT 0x4
+#define SDEDM_FSM_READCRC 0x5
+#define SDEDM_FSM_WRITECRC 0x6
+#define SDEDM_FSM_WRITEWAIT1 0x7
+#define SDEDM_FSM_POWERDOWN 0x8
+#define SDEDM_FSM_POWERUP 0x9
+#define SDEDM_FSM_WRITESTART1 0xa
+#define SDEDM_FSM_WRITESTART2 0xb
+#define SDEDM_FSM_GENPULSES 0xc
+#define SDEDM_FSM_WRITEWAIT2 0xd
+#define SDEDM_FSM_STARTPOWDOWN 0xf
+
+#define SDDATA_FIFO_WORDS 16
+
+#define FIFO_READ_THRESHOLD 4
+#define FIFO_WRITE_THRESHOLD 4
+#define SDDATA_FIFO_PIO_BURST 8
+
+#define PIO_THRESHOLD 1 /* Maximum block count for PIO (0 = always DMA) */
+
+struct bcm2835_host {
+ spinlock_t lock;
+ struct mutex mutex;
+
+ void __iomem *ioaddr;
+ u32 phys_addr;
+
+ struct mmc_host *mmc;
+ struct platform_device *pdev;
+
+ int clock; /* Current clock speed */
+ unsigned int max_clk; /* Max possible freq */
+ struct work_struct dma_work;
+ struct delayed_work timeout_work; /* Timer for timeouts */
+ struct sg_mapping_iter sg_miter; /* SG state for PIO */
+ unsigned int blocks; /* remaining PIO blocks */
+ int irq; /* Device IRQ */
+
+ u32 ns_per_fifo_word;
+
+ /* cached registers */
+ u32 hcfg;
+ u32 cdiv;
+
+ struct mmc_request *mrq; /* Current request */
+ struct mmc_command *cmd; /* Current command */
+ struct mmc_data *data; /* Current data request */
+ bool data_complete:1;/* Data finished before cmd */
+ bool use_busy:1; /* Wait for busy interrupt */
+ bool use_sbc:1; /* Send CMD23 */
+
+ /* for threaded irq handler */
+ bool irq_block;
+ bool irq_busy;
+ bool irq_data;
+
+ /* DMA part */
+ struct dma_chan *dma_chan_rxtx;
+ struct dma_chan *dma_chan;
+ struct dma_slave_config dma_cfg_rx;
+ struct dma_slave_config dma_cfg_tx;
+ struct dma_async_tx_descriptor *dma_desc;
+ u32 dma_dir;
+ u32 drain_words;
+ struct page *drain_page;
+ u32 drain_offset;
+ bool use_dma;
+};
+
+static void bcm2835_dumpcmd(struct bcm2835_host *host, struct mmc_command *cmd,
+ const char *label)
+{
+ struct device *dev = &host->pdev->dev;
+
+ if (!cmd)
+ return;
+
+ dev_dbg(dev, "%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n",
+ (cmd == host->cmd) ? '>' : ' ',
+ label, cmd->opcode, cmd->arg, cmd->flags,
+ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3],
+ cmd->error);
+}
+
+static void bcm2835_dumpregs(struct bcm2835_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+ struct device *dev = &host->pdev->dev;
+
+ if (mrq) {
+ bcm2835_dumpcmd(host, mrq->sbc, "sbc");
+ bcm2835_dumpcmd(host, mrq->cmd, "cmd");
+ if (mrq->data) {
+ dev_dbg(dev, "data blocks %x blksz %x - err %d\n",
+ mrq->data->blocks,
+ mrq->data->blksz,
+ mrq->data->error);
+ }
+ bcm2835_dumpcmd(host, mrq->stop, "stop");
+ }
+
+ dev_dbg(dev, "=========== REGISTER DUMP ===========\n");
+ dev_dbg(dev, "SDCMD 0x%08x\n", readl(host->ioaddr + SDCMD));
+ dev_dbg(dev, "SDARG 0x%08x\n", readl(host->ioaddr + SDARG));
+ dev_dbg(dev, "SDTOUT 0x%08x\n", readl(host->ioaddr + SDTOUT));
+ dev_dbg(dev, "SDCDIV 0x%08x\n", readl(host->ioaddr + SDCDIV));
+ dev_dbg(dev, "SDRSP0 0x%08x\n", readl(host->ioaddr + SDRSP0));
+ dev_dbg(dev, "SDRSP1 0x%08x\n", readl(host->ioaddr + SDRSP1));
+ dev_dbg(dev, "SDRSP2 0x%08x\n", readl(host->ioaddr + SDRSP2));
+ dev_dbg(dev, "SDRSP3 0x%08x\n", readl(host->ioaddr + SDRSP3));
+ dev_dbg(dev, "SDHSTS 0x%08x\n", readl(host->ioaddr + SDHSTS));
+ dev_dbg(dev, "SDVDD 0x%08x\n", readl(host->ioaddr + SDVDD));
+ dev_dbg(dev, "SDEDM 0x%08x\n", readl(host->ioaddr + SDEDM));
+ dev_dbg(dev, "SDHCFG 0x%08x\n", readl(host->ioaddr + SDHCFG));
+ dev_dbg(dev, "SDHBCT 0x%08x\n", readl(host->ioaddr + SDHBCT));
+ dev_dbg(dev, "SDHBLC 0x%08x\n", readl(host->ioaddr + SDHBLC));
+ dev_dbg(dev, "===========================================\n");
+}
+
+static void bcm2835_reset_internal(struct bcm2835_host *host)
+{
+ u32 temp;
+
+ writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD);
+ writel(0, host->ioaddr + SDCMD);
+ writel(0, host->ioaddr + SDARG);
+ writel(0xf00000, host->ioaddr + SDTOUT);
+ writel(0, host->ioaddr + SDCDIV);
+ writel(0x7f8, host->ioaddr + SDHSTS); /* Write 1s to clear */
+ writel(0, host->ioaddr + SDHCFG);
+ writel(0, host->ioaddr + SDHBCT);
+ writel(0, host->ioaddr + SDHBLC);
+
+ /* Limit fifo usage due to silicon bug */
+ temp = readl(host->ioaddr + SDEDM);
+ temp &= ~((SDEDM_THRESHOLD_MASK << SDEDM_READ_THRESHOLD_SHIFT) |
+ (SDEDM_THRESHOLD_MASK << SDEDM_WRITE_THRESHOLD_SHIFT));
+ temp |= (FIFO_READ_THRESHOLD << SDEDM_READ_THRESHOLD_SHIFT) |
+ (FIFO_WRITE_THRESHOLD << SDEDM_WRITE_THRESHOLD_SHIFT);
+ writel(temp, host->ioaddr + SDEDM);
+ msleep(20);
+ writel(SDVDD_POWER_ON, host->ioaddr + SDVDD);
+ msleep(20);
+ host->clock = 0;
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+}
+
+static void bcm2835_reset(struct mmc_host *mmc)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+
+ if (host->dma_chan)
+ dmaengine_terminate_sync(host->dma_chan);
+ bcm2835_reset_internal(host);
+}
+
+static void bcm2835_finish_command(struct bcm2835_host *host);
+
+static void bcm2835_wait_transfer_complete(struct bcm2835_host *host)
+{
+ int timediff;
+ u32 alternate_idle;
+
+ alternate_idle = (host->mrq->data->flags & MMC_DATA_READ) ?
+ SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1;
+
+ timediff = 0;
+
+ while (1) {
+ u32 edm, fsm;
+
+ edm = readl(host->ioaddr + SDEDM);
+ fsm = edm & SDEDM_FSM_MASK;
+
+ if ((fsm == SDEDM_FSM_IDENTMODE) ||
+ (fsm == SDEDM_FSM_DATAMODE))
+ break;
+ if (fsm == alternate_idle) {
+ writel(edm | SDEDM_FORCE_DATA_MODE,
+ host->ioaddr + SDEDM);
+ break;
+ }
+
+ timediff++;
+ if (timediff == 100000) {
+ dev_err(&host->pdev->dev,
+ "wait_transfer_complete - still waiting after %d retries\n",
+ timediff);
+ bcm2835_dumpregs(host);
+ host->mrq->data->error = -ETIMEDOUT;
+ return;
+ }
+ cpu_relax();
+ }
+}
+
+static void bcm2835_dma_complete(void *param)
+{
+ struct bcm2835_host *host = param;
+
+ schedule_work(&host->dma_work);
+}
+
+static void bcm2835_transfer_block_pio(struct bcm2835_host *host, bool is_read)
+{
+ unsigned long flags;
+ size_t blksize;
+ unsigned long wait_max;
+
+ blksize = host->data->blksz;
+
+ wait_max = jiffies + msecs_to_jiffies(500);
+
+ local_irq_save(flags);
+
+ while (blksize) {
+ int copy_words;
+ u32 hsts = 0;
+ size_t len;
+ u32 *buf;
+
+ if (!sg_miter_next(&host->sg_miter)) {
+ host->data->error = -EINVAL;
+ break;
+ }
+
+ len = min(host->sg_miter.length, blksize);
+ if (len % 4) {
+ host->data->error = -EINVAL;
+ break;
+ }
+
+ blksize -= len;
+ host->sg_miter.consumed = len;
+
+ buf = (u32 *)host->sg_miter.addr;
+
+ copy_words = len / 4;
+
+ while (copy_words) {
+ int burst_words, words;
+ u32 edm;
+
+ burst_words = min(SDDATA_FIFO_PIO_BURST, copy_words);
+ edm = readl(host->ioaddr + SDEDM);
+ if (is_read)
+ words = ((edm >> 4) & 0x1f);
+ else
+ words = SDDATA_FIFO_WORDS - ((edm >> 4) & 0x1f);
+
+ if (words < burst_words) {
+ int fsm_state = (edm & SDEDM_FSM_MASK);
+ struct device *dev = &host->pdev->dev;
+
+ if ((is_read &&
+ (fsm_state != SDEDM_FSM_READDATA &&
+ fsm_state != SDEDM_FSM_READWAIT &&
+ fsm_state != SDEDM_FSM_READCRC)) ||
+ (!is_read &&
+ (fsm_state != SDEDM_FSM_WRITEDATA &&
+ fsm_state != SDEDM_FSM_WRITESTART1 &&
+ fsm_state != SDEDM_FSM_WRITESTART2))) {
+ hsts = readl(host->ioaddr + SDHSTS);
+ dev_err(dev, "fsm %x, hsts %08x\n",
+ fsm_state, hsts);
+ if (hsts & SDHSTS_ERROR_MASK)
+ break;
+ }
+
+ if (time_after(jiffies, wait_max)) {
+ dev_err(dev, "PIO %s timeout - EDM %08x\n",
+ is_read ? "read" : "write",
+ edm);
+ hsts = SDHSTS_REW_TIME_OUT;
+ break;
+ }
+ ndelay((burst_words - words) *
+ host->ns_per_fifo_word);
+ continue;
+ } else if (words > copy_words) {
+ words = copy_words;
+ }
+
+ copy_words -= words;
+
+ while (words) {
+ if (is_read)
+ *(buf++) = readl(host->ioaddr + SDDATA);
+ else
+ writel(*(buf++), host->ioaddr + SDDATA);
+ words--;
+ }
+ }
+
+ if (hsts & SDHSTS_ERROR_MASK)
+ break;
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+static void bcm2835_transfer_pio(struct bcm2835_host *host)
+{
+ struct device *dev = &host->pdev->dev;
+ u32 sdhsts;
+ bool is_read;
+
+ is_read = (host->data->flags & MMC_DATA_READ) != 0;
+ bcm2835_transfer_block_pio(host, is_read);
+
+ sdhsts = readl(host->ioaddr + SDHSTS);
+ if (sdhsts & (SDHSTS_CRC16_ERROR |
+ SDHSTS_CRC7_ERROR |
+ SDHSTS_FIFO_ERROR)) {
+ dev_err(dev, "%s transfer error - HSTS %08x\n",
+ is_read ? "read" : "write", sdhsts);
+ host->data->error = -EILSEQ;
+ } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT |
+ SDHSTS_REW_TIME_OUT))) {
+ dev_err(dev, "%s timeout error - HSTS %08x\n",
+ is_read ? "read" : "write", sdhsts);
+ host->data->error = -ETIMEDOUT;
+ }
+}
+
+static
+void bcm2835_prepare_dma(struct bcm2835_host *host, struct mmc_data *data)
+{
+ int len, dir_data, dir_slave;
+ struct dma_async_tx_descriptor *desc = NULL;
+ struct dma_chan *dma_chan;
+
+ dma_chan = host->dma_chan_rxtx;
+ if (data->flags & MMC_DATA_READ) {
+ dir_data = DMA_FROM_DEVICE;
+ dir_slave = DMA_DEV_TO_MEM;
+ } else {
+ dir_data = DMA_TO_DEVICE;
+ dir_slave = DMA_MEM_TO_DEV;
+ }
+
+ /* The block doesn't manage the FIFO DREQs properly for
+ * multi-block transfers, so don't attempt to DMA the final
+ * few words. Unfortunately this requires the final sg entry
+ * to be trimmed. N.B. This code demands that the overspill
+ * is contained in a single sg entry.
+ */
+
+ host->drain_words = 0;
+ if ((data->blocks > 1) && (dir_data == DMA_FROM_DEVICE)) {
+ struct scatterlist *sg;
+ u32 len;
+ int i;
+
+ len = min((u32)(FIFO_READ_THRESHOLD - 1) * 4,
+ (u32)data->blocks * data->blksz);
+
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg_is_last(sg)) {
+ WARN_ON(sg->length < len);
+ sg->length -= len;
+ host->drain_page = sg_page(sg);
+ host->drain_offset = sg->offset + sg->length;
+ }
+ }
+ host->drain_words = len / 4;
+ }
+
+ /* The parameters have already been validated, so this will not fail */
+ (void)dmaengine_slave_config(dma_chan,
+ (dir_data == DMA_FROM_DEVICE) ?
+ &host->dma_cfg_rx :
+ &host->dma_cfg_tx);
+
+ len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len,
+ dir_data);
+
+ if (len > 0) {
+ desc = dmaengine_prep_slave_sg(dma_chan, data->sg,
+ len, dir_slave,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ }
+
+ if (desc) {
+ desc->callback = bcm2835_dma_complete;
+ desc->callback_param = host;
+ host->dma_desc = desc;
+ host->dma_chan = dma_chan;
+ host->dma_dir = dir_data;
+ }
+}
+
+static void bcm2835_start_dma(struct bcm2835_host *host)
+{
+ dmaengine_submit(host->dma_desc);
+ dma_async_issue_pending(host->dma_chan);
+}
+
+static void bcm2835_set_transfer_irqs(struct bcm2835_host *host)
+{
+ u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN |
+ SDHCFG_BUSY_IRPT_EN;
+
+ if (host->dma_desc) {
+ host->hcfg = (host->hcfg & ~all_irqs) |
+ SDHCFG_BUSY_IRPT_EN;
+ } else {
+ host->hcfg = (host->hcfg & ~all_irqs) |
+ SDHCFG_DATA_IRPT_EN |
+ SDHCFG_BUSY_IRPT_EN;
+ }
+
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+}
+
+static
+void bcm2835_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+
+ WARN_ON(host->data);
+
+ host->data = data;
+ if (!data)
+ return;
+
+ host->data_complete = false;
+ host->data->bytes_xfered = 0;
+
+ if (!host->dma_desc) {
+ /* Use PIO */
+ int flags = SG_MITER_ATOMIC;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ host->blocks = data->blocks;
+ }
+
+ bcm2835_set_transfer_irqs(host);
+
+ writel(data->blksz, host->ioaddr + SDHBCT);
+ writel(data->blocks, host->ioaddr + SDHBLC);
+}
+
+static u32 bcm2835_read_wait_sdcmd(struct bcm2835_host *host, u32 max_ms,
+ bool check_fail)
+{
+ struct device *dev = &host->pdev->dev;
+ u32 value;
+ int ret;
+
+ ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
+ (!(value & SDCMD_NEW_FLAG)) ||
+ (check_fail && (value & SDCMD_FAIL_FLAG)),
+ 1, 10);
+ if (ret == -ETIMEDOUT)
+ /* if it takes a while make poll interval bigger */
+ ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
+ (!(value & SDCMD_NEW_FLAG)) ||
+ (check_fail && (value & SDCMD_FAIL_FLAG)),
+ 10, max_ms * 1000);
+ if (ret == -ETIMEDOUT)
+ dev_err(dev, "%s: timeout (%d ms)\n", __func__, max_ms);
+
+ return value;
+}
+
+static void bcm2835_finish_request(struct bcm2835_host *host)
+{
+ struct dma_chan *terminate_chan = NULL;
+ struct mmc_request *mrq;
+
+ cancel_delayed_work(&host->timeout_work);
+
+ mrq = host->mrq;
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ host->dma_desc = NULL;
+ terminate_chan = host->dma_chan;
+ host->dma_chan = NULL;
+
+ if (terminate_chan) {
+ int err = dmaengine_terminate_all(terminate_chan);
+
+ if (err)
+ dev_err(&host->pdev->dev,
+ "failed to terminate DMA (%d)\n", err);
+ }
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static
+bool bcm2835_send_command(struct bcm2835_host *host, struct mmc_command *cmd)
+{
+ struct device *dev = &host->pdev->dev;
+ u32 sdcmd, sdhsts;
+ unsigned long timeout;
+
+ WARN_ON(host->cmd);
+
+ sdcmd = bcm2835_read_wait_sdcmd(host, 100, false);
+ if (sdcmd & SDCMD_NEW_FLAG) {
+ dev_err(dev, "previous command never completed.\n");
+ bcm2835_dumpregs(host);
+ cmd->error = -EILSEQ;
+ bcm2835_finish_request(host);
+ return false;
+ }
+
+ if (!cmd->data && cmd->busy_timeout > 9000)
+ timeout = DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+ else
+ timeout = 10 * HZ;
+ schedule_delayed_work(&host->timeout_work, timeout);
+
+ host->cmd = cmd;
+
+ /* Clear any error flags */
+ sdhsts = readl(host->ioaddr + SDHSTS);
+ if (sdhsts & SDHSTS_ERROR_MASK)
+ writel(sdhsts, host->ioaddr + SDHSTS);
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ dev_err(dev, "unsupported response type!\n");
+ cmd->error = -EINVAL;
+ bcm2835_finish_request(host);
+ return false;
+ }
+
+ bcm2835_prepare_data(host, cmd);
+
+ writel(cmd->arg, host->ioaddr + SDARG);
+
+ sdcmd = cmd->opcode & SDCMD_CMD_MASK;
+
+ host->use_busy = false;
+ if (!(cmd->flags & MMC_RSP_PRESENT)) {
+ sdcmd |= SDCMD_NO_RESPONSE;
+ } else {
+ if (cmd->flags & MMC_RSP_136)
+ sdcmd |= SDCMD_LONG_RESPONSE;
+ if (cmd->flags & MMC_RSP_BUSY) {
+ sdcmd |= SDCMD_BUSYWAIT;
+ host->use_busy = true;
+ }
+ }
+
+ if (cmd->data) {
+ if (cmd->data->flags & MMC_DATA_WRITE)
+ sdcmd |= SDCMD_WRITE_CMD;
+ if (cmd->data->flags & MMC_DATA_READ)
+ sdcmd |= SDCMD_READ_CMD;
+ }
+
+ writel(sdcmd | SDCMD_NEW_FLAG, host->ioaddr + SDCMD);
+
+ return true;
+}
+
+static void bcm2835_transfer_complete(struct bcm2835_host *host)
+{
+ struct mmc_data *data;
+
+ WARN_ON(!host->data_complete);
+
+ data = host->data;
+ host->data = NULL;
+
+ /* Need to send CMD12 if -
+ * a) open-ended multiblock transfer (no CMD23)
+ * b) error in multiblock transfer
+ */
+ if (host->mrq->stop && (data->error || !host->use_sbc)) {
+ if (bcm2835_send_command(host, host->mrq->stop)) {
+ /* No busy, so poll for completion */
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+ } else {
+ bcm2835_wait_transfer_complete(host);
+ bcm2835_finish_request(host);
+ }
+}
+
+static void bcm2835_finish_data(struct bcm2835_host *host)
+{
+ struct device *dev = &host->pdev->dev;
+ struct mmc_data *data;
+
+ data = host->data;
+
+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+
+ data->bytes_xfered = data->error ? 0 : (data->blksz * data->blocks);
+
+ host->data_complete = true;
+
+ if (host->cmd) {
+ /* Data managed to finish before the
+ * command completed. Make sure we do
+ * things in the proper order.
+ */
+ dev_dbg(dev, "Finished early - HSTS %08x\n",
+ readl(host->ioaddr + SDHSTS));
+ } else {
+ bcm2835_transfer_complete(host);
+ }
+}
+
+static void bcm2835_finish_command(struct bcm2835_host *host)
+{
+ struct device *dev = &host->pdev->dev;
+ struct mmc_command *cmd = host->cmd;
+ u32 sdcmd;
+
+ sdcmd = bcm2835_read_wait_sdcmd(host, 100, true);
+
+ /* Check for errors */
+ if (sdcmd & SDCMD_NEW_FLAG) {
+ dev_err(dev, "command never completed.\n");
+ bcm2835_dumpregs(host);
+ host->cmd->error = -EIO;
+ bcm2835_finish_request(host);
+ return;
+ } else if (sdcmd & SDCMD_FAIL_FLAG) {
+ u32 sdhsts = readl(host->ioaddr + SDHSTS);
+
+ /* Clear the errors */
+ writel(SDHSTS_ERROR_MASK, host->ioaddr + SDHSTS);
+
+ if (!(sdhsts & SDHSTS_CRC7_ERROR) ||
+ (host->cmd->opcode != MMC_SEND_OP_COND)) {
+ if (sdhsts & SDHSTS_CMD_TIME_OUT) {
+ host->cmd->error = -ETIMEDOUT;
+ } else {
+ dev_err(dev, "unexpected command %d error\n",
+ host->cmd->opcode);
+ bcm2835_dumpregs(host);
+ host->cmd->error = -EILSEQ;
+ }
+ bcm2835_finish_request(host);
+ return;
+ }
+ }
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ cmd->resp[3 - i] =
+ readl(host->ioaddr + SDRSP0 + i * 4);
+ }
+ } else {
+ cmd->resp[0] = readl(host->ioaddr + SDRSP0);
+ }
+ }
+
+ if (cmd == host->mrq->sbc) {
+ /* Finished CMD23, now send actual command. */
+ host->cmd = NULL;
+ if (bcm2835_send_command(host, host->mrq->cmd)) {
+ if (host->data && host->dma_desc)
+ /* DMA transfer starts now, PIO starts
+ * after irq
+ */
+ bcm2835_start_dma(host);
+
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+ } else if (cmd == host->mrq->stop) {
+ /* Finished CMD12 */
+ bcm2835_finish_request(host);
+ } else {
+ /* Processed actual command. */
+ host->cmd = NULL;
+ if (!host->data)
+ bcm2835_finish_request(host);
+ else if (host->data_complete)
+ bcm2835_transfer_complete(host);
+ }
+}
+
+static void bcm2835_timeout(struct work_struct *work)
+{
+ struct delayed_work *d = to_delayed_work(work);
+ struct bcm2835_host *host =
+ container_of(d, struct bcm2835_host, timeout_work);
+ struct device *dev = &host->pdev->dev;
+
+ mutex_lock(&host->mutex);
+
+ if (host->mrq) {
+ dev_err(dev, "timeout waiting for hardware interrupt.\n");
+ bcm2835_dumpregs(host);
+
+ if (host->data) {
+ host->data->error = -ETIMEDOUT;
+ bcm2835_finish_data(host);
+ } else {
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->mrq->cmd->error = -ETIMEDOUT;
+
+ bcm2835_finish_request(host);
+ }
+ }
+
+ mutex_unlock(&host->mutex);
+}
+
+static bool bcm2835_check_cmd_error(struct bcm2835_host *host, u32 intmask)
+{
+ struct device *dev = &host->pdev->dev;
+
+ if (!(intmask & SDHSTS_ERROR_MASK))
+ return false;
+
+ if (!host->cmd)
+ return true;
+
+ dev_err(dev, "sdhost_busy_irq: intmask %08x\n", intmask);
+ if (intmask & SDHSTS_CRC7_ERROR) {
+ host->cmd->error = -EILSEQ;
+ } else if (intmask & (SDHSTS_CRC16_ERROR |
+ SDHSTS_FIFO_ERROR)) {
+ if (host->mrq->data)
+ host->mrq->data->error = -EILSEQ;
+ else
+ host->cmd->error = -EILSEQ;
+ } else if (intmask & SDHSTS_REW_TIME_OUT) {
+ if (host->mrq->data)
+ host->mrq->data->error = -ETIMEDOUT;
+ else
+ host->cmd->error = -ETIMEDOUT;
+ } else if (intmask & SDHSTS_CMD_TIME_OUT) {
+ host->cmd->error = -ETIMEDOUT;
+ }
+ bcm2835_dumpregs(host);
+ return true;
+}
+
+static void bcm2835_check_data_error(struct bcm2835_host *host, u32 intmask)
+{
+ if (!host->data)
+ return;
+ if (intmask & (SDHSTS_CRC16_ERROR | SDHSTS_FIFO_ERROR))
+ host->data->error = -EILSEQ;
+ if (intmask & SDHSTS_REW_TIME_OUT)
+ host->data->error = -ETIMEDOUT;
+}
+
+static void bcm2835_busy_irq(struct bcm2835_host *host)
+{
+ if (WARN_ON(!host->cmd)) {
+ bcm2835_dumpregs(host);
+ return;
+ }
+
+ if (WARN_ON(!host->use_busy)) {
+ bcm2835_dumpregs(host);
+ return;
+ }
+ host->use_busy = false;
+
+ bcm2835_finish_command(host);
+}
+
+static void bcm2835_data_irq(struct bcm2835_host *host, u32 intmask)
+{
+ /* There are no dedicated data/space available interrupt
+ * status bits, so it is necessary to use the single shared
+ * data/space available FIFO status bits. It is therefore not
+ * an error to get here when there is no data transfer in
+ * progress.
+ */
+ if (!host->data)
+ return;
+
+ bcm2835_check_data_error(host, intmask);
+ if (host->data->error)
+ goto finished;
+
+ if (host->data->flags & MMC_DATA_WRITE) {
+ /* Use the block interrupt for writes after the first block */
+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN);
+ host->hcfg |= SDHCFG_BLOCK_IRPT_EN;
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+ bcm2835_transfer_pio(host);
+ } else {
+ bcm2835_transfer_pio(host);
+ host->blocks--;
+ if ((host->blocks == 0) || host->data->error)
+ goto finished;
+ }
+ return;
+
+finished:
+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+}
+
+static void bcm2835_data_threaded_irq(struct bcm2835_host *host)
+{
+ if (!host->data)
+ return;
+ if ((host->blocks == 0) || host->data->error)
+ bcm2835_finish_data(host);
+}
+
+static void bcm2835_block_irq(struct bcm2835_host *host)
+{
+ if (WARN_ON(!host->data)) {
+ bcm2835_dumpregs(host);
+ return;
+ }
+
+ if (!host->dma_desc) {
+ WARN_ON(!host->blocks);
+ if (host->data->error || (--host->blocks == 0))
+ bcm2835_finish_data(host);
+ else
+ bcm2835_transfer_pio(host);
+ } else if (host->data->flags & MMC_DATA_WRITE) {
+ bcm2835_finish_data(host);
+ }
+}
+
+static irqreturn_t bcm2835_irq(int irq, void *dev_id)
+{
+ irqreturn_t result = IRQ_NONE;
+ struct bcm2835_host *host = dev_id;
+ u32 intmask;
+
+ spin_lock(&host->lock);
+
+ intmask = readl(host->ioaddr + SDHSTS);
+
+ writel(SDHSTS_BUSY_IRPT |
+ SDHSTS_BLOCK_IRPT |
+ SDHSTS_SDIO_IRPT |
+ SDHSTS_DATA_FLAG,
+ host->ioaddr + SDHSTS);
+
+ if (intmask & SDHSTS_BLOCK_IRPT) {
+ bcm2835_check_data_error(host, intmask);
+ host->irq_block = true;
+ result = IRQ_WAKE_THREAD;
+ }
+
+ if (intmask & SDHSTS_BUSY_IRPT) {
+ if (!bcm2835_check_cmd_error(host, intmask)) {
+ host->irq_busy = true;
+ result = IRQ_WAKE_THREAD;
+ } else {
+ result = IRQ_HANDLED;
+ }
+ }
+
+ /* There is no true data interrupt status bit, so it is
+ * necessary to qualify the data flag with the interrupt
+ * enable bit.
+ */
+ if ((intmask & SDHSTS_DATA_FLAG) &&
+ (host->hcfg & SDHCFG_DATA_IRPT_EN)) {
+ bcm2835_data_irq(host, intmask);
+ host->irq_data = true;
+ result = IRQ_WAKE_THREAD;
+ }
+
+ spin_unlock(&host->lock);
+
+ return result;
+}
+
+static irqreturn_t bcm2835_threaded_irq(int irq, void *dev_id)
+{
+ struct bcm2835_host *host = dev_id;
+ unsigned long flags;
+ bool block, busy, data;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ block = host->irq_block;
+ busy = host->irq_busy;
+ data = host->irq_data;
+ host->irq_block = false;
+ host->irq_busy = false;
+ host->irq_data = false;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mutex_lock(&host->mutex);
+
+ if (block)
+ bcm2835_block_irq(host);
+ if (busy)
+ bcm2835_busy_irq(host);
+ if (data)
+ bcm2835_data_threaded_irq(host);
+
+ mutex_unlock(&host->mutex);
+
+ return IRQ_HANDLED;
+}
+
+static void bcm2835_dma_complete_work(struct work_struct *work)
+{
+ struct bcm2835_host *host =
+ container_of(work, struct bcm2835_host, dma_work);
+ struct mmc_data *data = host->data;
+
+ mutex_lock(&host->mutex);
+
+ if (host->dma_chan) {
+ dma_unmap_sg(host->dma_chan->device->dev,
+ data->sg, data->sg_len,
+ host->dma_dir);
+
+ host->dma_chan = NULL;
+ }
+
+ if (host->drain_words) {
+ unsigned long flags;
+ void *page;
+ u32 *buf;
+
+ if (host->drain_offset & PAGE_MASK) {
+ host->drain_page += host->drain_offset >> PAGE_SHIFT;
+ host->drain_offset &= ~PAGE_MASK;
+ }
+ local_irq_save(flags);
+ page = kmap_atomic(host->drain_page);
+ buf = page + host->drain_offset;
+
+ while (host->drain_words) {
+ u32 edm = readl(host->ioaddr + SDEDM);
+
+ if ((edm >> 4) & 0x1f)
+ *(buf++) = readl(host->ioaddr + SDDATA);
+ host->drain_words--;
+ }
+
+ kunmap_atomic(page);
+ local_irq_restore(flags);
+ }
+
+ bcm2835_finish_data(host);
+
+ mutex_unlock(&host->mutex);
+}
+
+static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
+{
+ int div;
+
+ /* The SDCDIV register has 11 bits, and holds (div - 2). But
+ * in data mode the max is 50MHz wihout a minimum, and only
+ * the bottom 3 bits are used. Since the switch over is
+ * automatic (unless we have marked the card as slow...),
+ * chosen values have to make sense in both modes. Ident mode
+ * must be 100-400KHz, so can range check the requested
+ * clock. CMD15 must be used to return to data mode, so this
+ * can be monitored.
+ *
+ * clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz
+ * 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz
+ *
+ * 623->400KHz/27.8MHz
+ * reset value (507)->491159/50MHz
+ *
+ * BUT, the 3-bit clock divisor in data mode is too small if
+ * the core clock is higher than 250MHz, so instead use the
+ * SLOW_CARD configuration bit to force the use of the ident
+ * clock divisor at all times.
+ */
+
+ if (clock < 100000) {
+ /* Can't stop the clock, but make it as slow as possible
+ * to show willing
+ */
+ host->cdiv = SDCDIV_MAX_CDIV;
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+ return;
+ }
+
+ div = host->max_clk / clock;
+ if (div < 2)
+ div = 2;
+ if ((host->max_clk / div) > clock)
+ div++;
+ div -= 2;
+
+ if (div > SDCDIV_MAX_CDIV)
+ div = SDCDIV_MAX_CDIV;
+
+ clock = host->max_clk / (div + 2);
+ host->mmc->actual_clock = clock;
+
+ /* Calibrate some delays */
+
+ host->ns_per_fifo_word = (1000000000 / clock) *
+ ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32);
+
+ host->cdiv = div;
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+
+ /* Set the timeout to 500ms */
+ writel(host->mmc->actual_clock / 2, host->ioaddr + SDTOUT);
+}
+
+static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+ struct device *dev = &host->pdev->dev;
+ u32 edm, fsm;
+
+ /* Reset the error statuses in case this is a retry */
+ if (mrq->sbc)
+ mrq->sbc->error = 0;
+ if (mrq->cmd)
+ mrq->cmd->error = 0;
+ if (mrq->data)
+ mrq->data->error = 0;
+ if (mrq->stop)
+ mrq->stop->error = 0;
+
+ if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
+ dev_err(dev, "unsupported block size (%d bytes)\n",
+ mrq->data->blksz);
+ mrq->cmd->error = -EINVAL;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ if (host->use_dma && mrq->data && (mrq->data->blocks > PIO_THRESHOLD))
+ bcm2835_prepare_dma(host, mrq->data);
+
+ mutex_lock(&host->mutex);
+
+ WARN_ON(host->mrq);
+ host->mrq = mrq;
+
+ edm = readl(host->ioaddr + SDEDM);
+ fsm = edm & SDEDM_FSM_MASK;
+
+ if ((fsm != SDEDM_FSM_IDENTMODE) &&
+ (fsm != SDEDM_FSM_DATAMODE)) {
+ dev_err(dev, "previous command (%d) not complete (EDM %08x)\n",
+ readl(host->ioaddr + SDCMD) & SDCMD_CMD_MASK,
+ edm);
+ bcm2835_dumpregs(host);
+ mrq->cmd->error = -EILSEQ;
+ bcm2835_finish_request(host);
+ mutex_unlock(&host->mutex);
+ return;
+ }
+
+ host->use_sbc = !!mrq->sbc && (host->mrq->data->flags & MMC_DATA_READ);
+ if (host->use_sbc) {
+ if (bcm2835_send_command(host, mrq->sbc)) {
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+ } else if (bcm2835_send_command(host, mrq->cmd)) {
+ if (host->data && host->dma_desc) {
+ /* DMA transfer starts now, PIO starts after irq */
+ bcm2835_start_dma(host);
+ }
+
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+
+ mutex_unlock(&host->mutex);
+}
+
+static void bcm2835_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+
+ mutex_lock(&host->mutex);
+
+ if (!ios->clock || ios->clock != host->clock) {
+ bcm2835_set_clock(host, ios->clock);
+ host->clock = ios->clock;
+ }
+
+ /* set bus width */
+ host->hcfg &= ~SDHCFG_WIDE_EXT_BUS;
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ host->hcfg |= SDHCFG_WIDE_EXT_BUS;
+
+ host->hcfg |= SDHCFG_WIDE_INT_BUS;
+
+ /* Disable clever clock switching, to cope with fast core clocks */
+ host->hcfg |= SDHCFG_SLOW_CARD;
+
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+
+ mutex_unlock(&host->mutex);
+}
+
+static struct mmc_host_ops bcm2835_ops = {
+ .request = bcm2835_request,
+ .set_ios = bcm2835_set_ios,
+ .hw_reset = bcm2835_reset,
+};
+
+static int bcm2835_add_host(struct bcm2835_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ struct device *dev = &host->pdev->dev;
+ char pio_limit_string[20];
+ int ret;
+
+ bcm2835_reset_internal(host);
+
+ mmc->f_max = host->max_clk;
+ mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV;
+
+ mmc->max_busy_timeout = ~0 / (mmc->f_max / 1000);
+
+ dev_dbg(dev, "f_max %d, f_min %d, max_busy_timeout %d\n",
+ mmc->f_max, mmc->f_min, mmc->max_busy_timeout);
+
+ /* host controller capabilities */
+ mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE |
+ MMC_CAP_CMD23;
+
+ spin_lock_init(&host->lock);
+ mutex_init(&host->mutex);
+
+ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) {
+ dev_warn(dev, "unable to initialise DMA channel. Falling back to PIO\n");
+ host->use_dma = false;
+ } else {
+ host->use_dma = true;
+
+ host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_tx.slave_id = 13; /* DREQ channel */
+ host->dma_cfg_tx.direction = DMA_MEM_TO_DEV;
+ host->dma_cfg_tx.src_addr = 0;
+ host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA;
+
+ host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_rx.slave_id = 13; /* DREQ channel */
+ host->dma_cfg_rx.direction = DMA_DEV_TO_MEM;
+ host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA;
+ host->dma_cfg_rx.dst_addr = 0;
+
+ if (dmaengine_slave_config(host->dma_chan_rxtx,
+ &host->dma_cfg_tx) != 0 ||
+ dmaengine_slave_config(host->dma_chan_rxtx,
+ &host->dma_cfg_rx) != 0)
+ host->use_dma = false;
+ }
+
+ mmc->max_segs = 128;
+ mmc->max_req_size = 524288;
+ mmc->max_seg_size = mmc->max_req_size;
+ mmc->max_blk_size = 1024;
+ mmc->max_blk_count = 65535;
+
+ /* report supported voltage ranges */
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ INIT_WORK(&host->dma_work, bcm2835_dma_complete_work);
+ INIT_DELAYED_WORK(&host->timeout_work, bcm2835_timeout);
+
+ /* Set interrupt enables */
+ host->hcfg = SDHCFG_BUSY_IRPT_EN;
+
+ bcm2835_reset_internal(host);
+
+ ret = request_threaded_irq(host->irq, bcm2835_irq,
+ bcm2835_threaded_irq,
+ 0, mmc_hostname(mmc), host);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ %d: %d\n", host->irq, ret);
+ return ret;
+ }
+
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ free_irq(host->irq, host);
+ return ret;
+ }
+
+ pio_limit_string[0] = '\0';
+ if (host->use_dma && (PIO_THRESHOLD > 0))
+ sprintf(pio_limit_string, " (>%d)", PIO_THRESHOLD);
+ dev_info(dev, "loaded - DMA %s%s\n",
+ host->use_dma ? "enabled" : "disabled", pio_limit_string);
+
+ return 0;
+}
+
+static int bcm2835_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk *clk;
+ struct resource *iomem;
+ struct bcm2835_host *host;
+ struct mmc_host *mmc;
+ const __be32 *regaddr_p;
+ int ret;
+
+ dev_dbg(dev, "%s\n", __func__);
+ mmc = mmc_alloc_host(sizeof(*host), dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ mmc->ops = &bcm2835_ops;
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->pdev = pdev;
+ spin_lock_init(&host->lock);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->ioaddr = devm_ioremap_resource(dev, iomem);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
+ goto err;
+ }
+
+ /* Parse OF address directly to get the physical address for
+ * DMA to our registers.
+ */
+ regaddr_p = of_get_address(pdev->dev.of_node, 0, NULL, NULL);
+ if (!regaddr_p) {
+ dev_err(dev, "Can't get phys address\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ host->phys_addr = be32_to_cpup(regaddr_p);
+
+ host->dma_chan = NULL;
+ host->dma_desc = NULL;
+
+ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx");
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "could not get clk: %d\n", ret);
+ goto err;
+ }
+
+ host->max_clk = clk_get_rate(clk);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq <= 0) {
+ dev_err(dev, "get IRQ failed\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto err;
+
+ ret = bcm2835_add_host(host);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, host);
+
+ dev_dbg(dev, "%s -> OK\n", __func__);
+
+ return 0;
+
+err:
+ dev_dbg(dev, "%s -> err %d\n", __func__, ret);
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static int bcm2835_remove(struct platform_device *pdev)
+{
+ struct bcm2835_host *host = platform_get_drvdata(pdev);
+
+ mmc_remove_host(host->mmc);
+
+ writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD);
+
+ free_irq(host->irq, host);
+
+ cancel_work_sync(&host->dma_work);
+ cancel_delayed_work_sync(&host->timeout_work);
+
+ mmc_free_host(host->mmc);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id bcm2835_match[] = {
+ { .compatible = "brcm,bcm2835-sdhost" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_match);
+
+static struct platform_driver bcm2835_driver = {
+ .probe = bcm2835_probe,
+ .remove = bcm2835_remove,
+ .driver = {
+ .name = "sdhost-bcm2835",
+ .of_match_table = bcm2835_match,
+ },
+};
+module_platform_driver(bcm2835_driver);
+
+MODULE_ALIAS("platform:sdhost-bcm2835");
+MODULE_DESCRIPTION("BCM2835 SDHost driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Phil Elwell");
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Eric Anholt <eric@anholt.net>
The 2835 has two SD controllers: The Arasan sdhci controller (supported
by the iproc driver) and a custom sdhost controller. This patch adds a
driver for the latter.
The sdhci controller supports both sdcard and sdio. The sdhost
controller supports the sdcard only, but has better performance. Also
note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
controller allows to use the sdhci controller for wifi support.
The configuration is done by devicetree via pin muxing. Both SD
controller are available on the same pins (2 pin groups = pin 22 to 27 +
pin 48 to 53). So it's possible to use both SD controllers at the same
time with different pin groups.
The code was originally written by Phil Elwell in the downstream
Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
out of the original 2055) for inclusion.
Signed-off-by: Eric Anholt <eric@anholt.net>
cleanups by Gerd Hoffmann
mmc: bcm2835: zap mmiowb()
mmc: bcm2835: reset tweaks.
mmc: bcm2835: more reset tweaks.
mmc: bcm2835: rename bcm2835_sdhost to bcm2835
mmc: bcm2835: whitespace & comment style
mmc: bcm2835: zap bcm2835_write
mmc: bcm2835: zap bcm2835_read
mmc: bcm2835: zap bcm2835_read_relaxed
mmc: bcm2835: zap bcm2835_set_ios fwd decl
mmc: bcm2835: use dev_dbg()
mmc: bcm2835: use dev_err()
mmc: bcm2835: use dev_warn() + dev_into()
cleanups by Stefan Wahren
mmc: bcm2835: Fix checkpatch.pl warning
mmc: bcm2835: replace spaces with tabs
mmc: bcm2835: remove bcm2835_set_power
mmc: bcm2835: remove bcm2835_init()
mmc: bcm2835: Avoid separate init statement
mmc: bcm2835: Use local device ptr to make code more compact
mmc: bcm2835: Use local ptr to make code more compact
mmc: bcm2835: Use __func__ macro
mmc: bcm2835: sort includes alphabetical
mmc: bcm2835: fix includes
mmc: bcm2835: refactor bcm2835_wait_transfer_complete()
mmc: bcm2835: Handle error case of of_get_address
mmc: bcm2835: Use MMC_SEND_OP_COND instead of number
mmc: bcm2835: Rearrange mmc capabilities
mmc: bcm2835: Add missing include for threaded irq
mmc: bcm2835: Remove CMD_DALLY_US
mmc: bcm2835: Fix pio_timeout handling
mmc: bcm2835: Remove unnecessary return in bcm2835_data_irq
mmc: bcm2835: Handle error cases during probe
mmc: bcm2835: Print clk_max as decimal
mmc: bcm2835: Downrate message in case of PIO fallback
mmc: bcm2835: Don't unveil the data pointer
mmc: bcm2835: remove unused host members
mmc: bcm2835: Avoid unnecessary linebreaks
mmc: bcm2835: Add leading zero to register dumps
mmc: bcm2835: Align struct members with tabs
mmc: bcm2835: Rearrange bcm2835_finish_request()
mmc: bcm2835: Rearrange bcm2835_dma_complete_work()
mmc: bcm2835: Rename Kconfig switch
mmc: bcm2835: replace pio_limit with define
mmc: bcm2835: Increase max_blk_size to 1024
mmc: bcm2835: make internal functions static
mmc: bcm2835: reduce variable scope within bcm2835_transfer_block_pio
mmc: bcm2835: simplify burst words calculation
mmc: bcm2835: remove unnecessary debug messages
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
driver modernizations:
* run most driver code in thread context.
- use threaded irq handler.
- schedule worker for timeout handling.
* use mutex for locking, so we can easily sleep.
* simplify poll/wait code, drop tasklet and work queue.
* fix DMA support.
* use only one dma channel (port from downstream)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
drivers/mmc/host/Kconfig | 14 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/bcm2835.c | 1471 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1486 insertions(+)
create mode 100644 drivers/mmc/host/bcm2835.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 2eb9701..7fabd2538 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -790,6 +790,20 @@ config MMC_TOSHIBA_PCI
depends on PCI
help
+config MMC_BCM2835
+ tristate "Broadcom BCM2835 SDHOST MMC Controller support"
+ depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on HAS_DMA
+ help
+ This selects the BCM2835 SDHOST MMC controller. If you have
+ a BCM2835 platform with SD or MMC devices, say Y or M here.
+
+ Note that the BCM2835 has two SD controllers: The Arasan
+ sdhci controller (supported by MMC_SDHCI_IPROC) and a custom
+ sdhost controller (supported by this driver).
+
+ If unsure, say N.
+
config MMC_MTK
tristate "MediaTek SD/MMC Card Interface support"
depends on HAS_DMA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index ccc9c4c..1a8fbab 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o
+obj-$(CONFIG_MMC_BCM2835) += bcm2835.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
new file mode 100644
index 0000000..90b93d6
--- /dev/null
+++ b/drivers/mmc/host/bcm2835.c
@@ -0,0 +1,1471 @@
+/*
+ * bcm2835 sdhost driver.
+ *
+ * The 2835 has two SD controllers: The Arasan sdhci controller
+ * (supported by the iproc driver) and a custom sdhost controller
+ * (supported by this driver).
+ *
+ * The sdhci controller supports both sdcard and sdio. The sdhost
+ * controller supports the sdcard only, but has better performance.
+ * Also note that the rpi3 has sdio wifi, so driving the sdcard with
+ * the sdhost controller allows to use the sdhci controller for wifi
+ * support.
+ *
+ * The configuration is done by devicetree via pin muxing. Both
+ * SD controller are available on the same pins (2 pin groups = pin 22
+ * to 27 + pin 48 to 53). So it's possible to use both SD controllers
+ * at the same time with different pin groups.
+ *
+ * Author: Phil Elwell <phil@raspberrypi.org>
+ * Copyright (C) 2015-2016 Raspberry Pi (Trading) Ltd.
+ *
+ * Based on
+ * mmc-bcm2835.c by Gellert Weisz
+ * which is, in turn, based on
+ * sdhci-bcm2708.c by Broadcom
+ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko
+ * sdhci.c and sdhci-pci.c by Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+
+#define SDCMD 0x00 /* Command to SD card - 16 R/W */
+#define SDARG 0x04 /* Argument to SD card - 32 R/W */
+#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */
+#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */
+#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */
+#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */
+#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */
+#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */
+#define SDHSTS 0x20 /* SD host status - 11 R */
+#define SDVDD 0x30 /* SD card power control - 1 R/W */
+#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */
+#define SDHCFG 0x38 /* Host configuration - 2 R/W */
+#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */
+#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */
+#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */
+
+#define SDCMD_NEW_FLAG 0x8000
+#define SDCMD_FAIL_FLAG 0x4000
+#define SDCMD_BUSYWAIT 0x800
+#define SDCMD_NO_RESPONSE 0x400
+#define SDCMD_LONG_RESPONSE 0x200
+#define SDCMD_WRITE_CMD 0x80
+#define SDCMD_READ_CMD 0x40
+#define SDCMD_CMD_MASK 0x3f
+
+#define SDCDIV_MAX_CDIV 0x7ff
+
+#define SDHSTS_BUSY_IRPT 0x400
+#define SDHSTS_BLOCK_IRPT 0x200
+#define SDHSTS_SDIO_IRPT 0x100
+#define SDHSTS_REW_TIME_OUT 0x80
+#define SDHSTS_CMD_TIME_OUT 0x40
+#define SDHSTS_CRC16_ERROR 0x20
+#define SDHSTS_CRC7_ERROR 0x10
+#define SDHSTS_FIFO_ERROR 0x08
+/* Reserved */
+/* Reserved */
+#define SDHSTS_DATA_FLAG 0x01
+
+#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR | \
+ SDHSTS_CRC16_ERROR | \
+ SDHSTS_REW_TIME_OUT | \
+ SDHSTS_FIFO_ERROR)
+
+#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT | \
+ SDHSTS_TRANSFER_ERROR_MASK)
+
+#define SDHCFG_BUSY_IRPT_EN BIT(10)
+#define SDHCFG_BLOCK_IRPT_EN BIT(8)
+#define SDHCFG_SDIO_IRPT_EN BIT(5)
+#define SDHCFG_DATA_IRPT_EN BIT(4)
+#define SDHCFG_SLOW_CARD BIT(3)
+#define SDHCFG_WIDE_EXT_BUS BIT(2)
+#define SDHCFG_WIDE_INT_BUS BIT(1)
+#define SDHCFG_REL_CMD_LINE BIT(0)
+
+#define SDVDD_POWER_OFF 0
+#define SDVDD_POWER_ON 1
+
+#define SDEDM_FORCE_DATA_MODE BIT(19)
+#define SDEDM_CLOCK_PULSE BIT(20)
+#define SDEDM_BYPASS BIT(21)
+
+#define SDEDM_WRITE_THRESHOLD_SHIFT 9
+#define SDEDM_READ_THRESHOLD_SHIFT 14
+#define SDEDM_THRESHOLD_MASK 0x1f
+
+#define SDEDM_FSM_MASK 0xf
+#define SDEDM_FSM_IDENTMODE 0x0
+#define SDEDM_FSM_DATAMODE 0x1
+#define SDEDM_FSM_READDATA 0x2
+#define SDEDM_FSM_WRITEDATA 0x3
+#define SDEDM_FSM_READWAIT 0x4
+#define SDEDM_FSM_READCRC 0x5
+#define SDEDM_FSM_WRITECRC 0x6
+#define SDEDM_FSM_WRITEWAIT1 0x7
+#define SDEDM_FSM_POWERDOWN 0x8
+#define SDEDM_FSM_POWERUP 0x9
+#define SDEDM_FSM_WRITESTART1 0xa
+#define SDEDM_FSM_WRITESTART2 0xb
+#define SDEDM_FSM_GENPULSES 0xc
+#define SDEDM_FSM_WRITEWAIT2 0xd
+#define SDEDM_FSM_STARTPOWDOWN 0xf
+
+#define SDDATA_FIFO_WORDS 16
+
+#define FIFO_READ_THRESHOLD 4
+#define FIFO_WRITE_THRESHOLD 4
+#define SDDATA_FIFO_PIO_BURST 8
+
+#define PIO_THRESHOLD 1 /* Maximum block count for PIO (0 = always DMA) */
+
+struct bcm2835_host {
+ spinlock_t lock;
+ struct mutex mutex;
+
+ void __iomem *ioaddr;
+ u32 phys_addr;
+
+ struct mmc_host *mmc;
+ struct platform_device *pdev;
+
+ int clock; /* Current clock speed */
+ unsigned int max_clk; /* Max possible freq */
+ struct work_struct dma_work;
+ struct delayed_work timeout_work; /* Timer for timeouts */
+ struct sg_mapping_iter sg_miter; /* SG state for PIO */
+ unsigned int blocks; /* remaining PIO blocks */
+ int irq; /* Device IRQ */
+
+ u32 ns_per_fifo_word;
+
+ /* cached registers */
+ u32 hcfg;
+ u32 cdiv;
+
+ struct mmc_request *mrq; /* Current request */
+ struct mmc_command *cmd; /* Current command */
+ struct mmc_data *data; /* Current data request */
+ bool data_complete:1;/* Data finished before cmd */
+ bool use_busy:1; /* Wait for busy interrupt */
+ bool use_sbc:1; /* Send CMD23 */
+
+ /* for threaded irq handler */
+ bool irq_block;
+ bool irq_busy;
+ bool irq_data;
+
+ /* DMA part */
+ struct dma_chan *dma_chan_rxtx;
+ struct dma_chan *dma_chan;
+ struct dma_slave_config dma_cfg_rx;
+ struct dma_slave_config dma_cfg_tx;
+ struct dma_async_tx_descriptor *dma_desc;
+ u32 dma_dir;
+ u32 drain_words;
+ struct page *drain_page;
+ u32 drain_offset;
+ bool use_dma;
+};
+
+static void bcm2835_dumpcmd(struct bcm2835_host *host, struct mmc_command *cmd,
+ const char *label)
+{
+ struct device *dev = &host->pdev->dev;
+
+ if (!cmd)
+ return;
+
+ dev_dbg(dev, "%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n",
+ (cmd == host->cmd) ? '>' : ' ',
+ label, cmd->opcode, cmd->arg, cmd->flags,
+ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3],
+ cmd->error);
+}
+
+static void bcm2835_dumpregs(struct bcm2835_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+ struct device *dev = &host->pdev->dev;
+
+ if (mrq) {
+ bcm2835_dumpcmd(host, mrq->sbc, "sbc");
+ bcm2835_dumpcmd(host, mrq->cmd, "cmd");
+ if (mrq->data) {
+ dev_dbg(dev, "data blocks %x blksz %x - err %d\n",
+ mrq->data->blocks,
+ mrq->data->blksz,
+ mrq->data->error);
+ }
+ bcm2835_dumpcmd(host, mrq->stop, "stop");
+ }
+
+ dev_dbg(dev, "=========== REGISTER DUMP ===========\n");
+ dev_dbg(dev, "SDCMD 0x%08x\n", readl(host->ioaddr + SDCMD));
+ dev_dbg(dev, "SDARG 0x%08x\n", readl(host->ioaddr + SDARG));
+ dev_dbg(dev, "SDTOUT 0x%08x\n", readl(host->ioaddr + SDTOUT));
+ dev_dbg(dev, "SDCDIV 0x%08x\n", readl(host->ioaddr + SDCDIV));
+ dev_dbg(dev, "SDRSP0 0x%08x\n", readl(host->ioaddr + SDRSP0));
+ dev_dbg(dev, "SDRSP1 0x%08x\n", readl(host->ioaddr + SDRSP1));
+ dev_dbg(dev, "SDRSP2 0x%08x\n", readl(host->ioaddr + SDRSP2));
+ dev_dbg(dev, "SDRSP3 0x%08x\n", readl(host->ioaddr + SDRSP3));
+ dev_dbg(dev, "SDHSTS 0x%08x\n", readl(host->ioaddr + SDHSTS));
+ dev_dbg(dev, "SDVDD 0x%08x\n", readl(host->ioaddr + SDVDD));
+ dev_dbg(dev, "SDEDM 0x%08x\n", readl(host->ioaddr + SDEDM));
+ dev_dbg(dev, "SDHCFG 0x%08x\n", readl(host->ioaddr + SDHCFG));
+ dev_dbg(dev, "SDHBCT 0x%08x\n", readl(host->ioaddr + SDHBCT));
+ dev_dbg(dev, "SDHBLC 0x%08x\n", readl(host->ioaddr + SDHBLC));
+ dev_dbg(dev, "===========================================\n");
+}
+
+static void bcm2835_reset_internal(struct bcm2835_host *host)
+{
+ u32 temp;
+
+ writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD);
+ writel(0, host->ioaddr + SDCMD);
+ writel(0, host->ioaddr + SDARG);
+ writel(0xf00000, host->ioaddr + SDTOUT);
+ writel(0, host->ioaddr + SDCDIV);
+ writel(0x7f8, host->ioaddr + SDHSTS); /* Write 1s to clear */
+ writel(0, host->ioaddr + SDHCFG);
+ writel(0, host->ioaddr + SDHBCT);
+ writel(0, host->ioaddr + SDHBLC);
+
+ /* Limit fifo usage due to silicon bug */
+ temp = readl(host->ioaddr + SDEDM);
+ temp &= ~((SDEDM_THRESHOLD_MASK << SDEDM_READ_THRESHOLD_SHIFT) |
+ (SDEDM_THRESHOLD_MASK << SDEDM_WRITE_THRESHOLD_SHIFT));
+ temp |= (FIFO_READ_THRESHOLD << SDEDM_READ_THRESHOLD_SHIFT) |
+ (FIFO_WRITE_THRESHOLD << SDEDM_WRITE_THRESHOLD_SHIFT);
+ writel(temp, host->ioaddr + SDEDM);
+ msleep(20);
+ writel(SDVDD_POWER_ON, host->ioaddr + SDVDD);
+ msleep(20);
+ host->clock = 0;
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+}
+
+static void bcm2835_reset(struct mmc_host *mmc)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+
+ if (host->dma_chan)
+ dmaengine_terminate_sync(host->dma_chan);
+ bcm2835_reset_internal(host);
+}
+
+static void bcm2835_finish_command(struct bcm2835_host *host);
+
+static void bcm2835_wait_transfer_complete(struct bcm2835_host *host)
+{
+ int timediff;
+ u32 alternate_idle;
+
+ alternate_idle = (host->mrq->data->flags & MMC_DATA_READ) ?
+ SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1;
+
+ timediff = 0;
+
+ while (1) {
+ u32 edm, fsm;
+
+ edm = readl(host->ioaddr + SDEDM);
+ fsm = edm & SDEDM_FSM_MASK;
+
+ if ((fsm == SDEDM_FSM_IDENTMODE) ||
+ (fsm == SDEDM_FSM_DATAMODE))
+ break;
+ if (fsm == alternate_idle) {
+ writel(edm | SDEDM_FORCE_DATA_MODE,
+ host->ioaddr + SDEDM);
+ break;
+ }
+
+ timediff++;
+ if (timediff == 100000) {
+ dev_err(&host->pdev->dev,
+ "wait_transfer_complete - still waiting after %d retries\n",
+ timediff);
+ bcm2835_dumpregs(host);
+ host->mrq->data->error = -ETIMEDOUT;
+ return;
+ }
+ cpu_relax();
+ }
+}
+
+static void bcm2835_dma_complete(void *param)
+{
+ struct bcm2835_host *host = param;
+
+ schedule_work(&host->dma_work);
+}
+
+static void bcm2835_transfer_block_pio(struct bcm2835_host *host, bool is_read)
+{
+ unsigned long flags;
+ size_t blksize;
+ unsigned long wait_max;
+
+ blksize = host->data->blksz;
+
+ wait_max = jiffies + msecs_to_jiffies(500);
+
+ local_irq_save(flags);
+
+ while (blksize) {
+ int copy_words;
+ u32 hsts = 0;
+ size_t len;
+ u32 *buf;
+
+ if (!sg_miter_next(&host->sg_miter)) {
+ host->data->error = -EINVAL;
+ break;
+ }
+
+ len = min(host->sg_miter.length, blksize);
+ if (len % 4) {
+ host->data->error = -EINVAL;
+ break;
+ }
+
+ blksize -= len;
+ host->sg_miter.consumed = len;
+
+ buf = (u32 *)host->sg_miter.addr;
+
+ copy_words = len / 4;
+
+ while (copy_words) {
+ int burst_words, words;
+ u32 edm;
+
+ burst_words = min(SDDATA_FIFO_PIO_BURST, copy_words);
+ edm = readl(host->ioaddr + SDEDM);
+ if (is_read)
+ words = ((edm >> 4) & 0x1f);
+ else
+ words = SDDATA_FIFO_WORDS - ((edm >> 4) & 0x1f);
+
+ if (words < burst_words) {
+ int fsm_state = (edm & SDEDM_FSM_MASK);
+ struct device *dev = &host->pdev->dev;
+
+ if ((is_read &&
+ (fsm_state != SDEDM_FSM_READDATA &&
+ fsm_state != SDEDM_FSM_READWAIT &&
+ fsm_state != SDEDM_FSM_READCRC)) ||
+ (!is_read &&
+ (fsm_state != SDEDM_FSM_WRITEDATA &&
+ fsm_state != SDEDM_FSM_WRITESTART1 &&
+ fsm_state != SDEDM_FSM_WRITESTART2))) {
+ hsts = readl(host->ioaddr + SDHSTS);
+ dev_err(dev, "fsm %x, hsts %08x\n",
+ fsm_state, hsts);
+ if (hsts & SDHSTS_ERROR_MASK)
+ break;
+ }
+
+ if (time_after(jiffies, wait_max)) {
+ dev_err(dev, "PIO %s timeout - EDM %08x\n",
+ is_read ? "read" : "write",
+ edm);
+ hsts = SDHSTS_REW_TIME_OUT;
+ break;
+ }
+ ndelay((burst_words - words) *
+ host->ns_per_fifo_word);
+ continue;
+ } else if (words > copy_words) {
+ words = copy_words;
+ }
+
+ copy_words -= words;
+
+ while (words) {
+ if (is_read)
+ *(buf++) = readl(host->ioaddr + SDDATA);
+ else
+ writel(*(buf++), host->ioaddr + SDDATA);
+ words--;
+ }
+ }
+
+ if (hsts & SDHSTS_ERROR_MASK)
+ break;
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+static void bcm2835_transfer_pio(struct bcm2835_host *host)
+{
+ struct device *dev = &host->pdev->dev;
+ u32 sdhsts;
+ bool is_read;
+
+ is_read = (host->data->flags & MMC_DATA_READ) != 0;
+ bcm2835_transfer_block_pio(host, is_read);
+
+ sdhsts = readl(host->ioaddr + SDHSTS);
+ if (sdhsts & (SDHSTS_CRC16_ERROR |
+ SDHSTS_CRC7_ERROR |
+ SDHSTS_FIFO_ERROR)) {
+ dev_err(dev, "%s transfer error - HSTS %08x\n",
+ is_read ? "read" : "write", sdhsts);
+ host->data->error = -EILSEQ;
+ } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT |
+ SDHSTS_REW_TIME_OUT))) {
+ dev_err(dev, "%s timeout error - HSTS %08x\n",
+ is_read ? "read" : "write", sdhsts);
+ host->data->error = -ETIMEDOUT;
+ }
+}
+
+static
+void bcm2835_prepare_dma(struct bcm2835_host *host, struct mmc_data *data)
+{
+ int len, dir_data, dir_slave;
+ struct dma_async_tx_descriptor *desc = NULL;
+ struct dma_chan *dma_chan;
+
+ dma_chan = host->dma_chan_rxtx;
+ if (data->flags & MMC_DATA_READ) {
+ dir_data = DMA_FROM_DEVICE;
+ dir_slave = DMA_DEV_TO_MEM;
+ } else {
+ dir_data = DMA_TO_DEVICE;
+ dir_slave = DMA_MEM_TO_DEV;
+ }
+
+ /* The block doesn't manage the FIFO DREQs properly for
+ * multi-block transfers, so don't attempt to DMA the final
+ * few words. Unfortunately this requires the final sg entry
+ * to be trimmed. N.B. This code demands that the overspill
+ * is contained in a single sg entry.
+ */
+
+ host->drain_words = 0;
+ if ((data->blocks > 1) && (dir_data == DMA_FROM_DEVICE)) {
+ struct scatterlist *sg;
+ u32 len;
+ int i;
+
+ len = min((u32)(FIFO_READ_THRESHOLD - 1) * 4,
+ (u32)data->blocks * data->blksz);
+
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg_is_last(sg)) {
+ WARN_ON(sg->length < len);
+ sg->length -= len;
+ host->drain_page = sg_page(sg);
+ host->drain_offset = sg->offset + sg->length;
+ }
+ }
+ host->drain_words = len / 4;
+ }
+
+ /* The parameters have already been validated, so this will not fail */
+ (void)dmaengine_slave_config(dma_chan,
+ (dir_data == DMA_FROM_DEVICE) ?
+ &host->dma_cfg_rx :
+ &host->dma_cfg_tx);
+
+ len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len,
+ dir_data);
+
+ if (len > 0) {
+ desc = dmaengine_prep_slave_sg(dma_chan, data->sg,
+ len, dir_slave,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ }
+
+ if (desc) {
+ desc->callback = bcm2835_dma_complete;
+ desc->callback_param = host;
+ host->dma_desc = desc;
+ host->dma_chan = dma_chan;
+ host->dma_dir = dir_data;
+ }
+}
+
+static void bcm2835_start_dma(struct bcm2835_host *host)
+{
+ dmaengine_submit(host->dma_desc);
+ dma_async_issue_pending(host->dma_chan);
+}
+
+static void bcm2835_set_transfer_irqs(struct bcm2835_host *host)
+{
+ u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN |
+ SDHCFG_BUSY_IRPT_EN;
+
+ if (host->dma_desc) {
+ host->hcfg = (host->hcfg & ~all_irqs) |
+ SDHCFG_BUSY_IRPT_EN;
+ } else {
+ host->hcfg = (host->hcfg & ~all_irqs) |
+ SDHCFG_DATA_IRPT_EN |
+ SDHCFG_BUSY_IRPT_EN;
+ }
+
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+}
+
+static
+void bcm2835_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+
+ WARN_ON(host->data);
+
+ host->data = data;
+ if (!data)
+ return;
+
+ host->data_complete = false;
+ host->data->bytes_xfered = 0;
+
+ if (!host->dma_desc) {
+ /* Use PIO */
+ int flags = SG_MITER_ATOMIC;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ host->blocks = data->blocks;
+ }
+
+ bcm2835_set_transfer_irqs(host);
+
+ writel(data->blksz, host->ioaddr + SDHBCT);
+ writel(data->blocks, host->ioaddr + SDHBLC);
+}
+
+static u32 bcm2835_read_wait_sdcmd(struct bcm2835_host *host, u32 max_ms,
+ bool check_fail)
+{
+ struct device *dev = &host->pdev->dev;
+ u32 value;
+ int ret;
+
+ ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
+ (!(value & SDCMD_NEW_FLAG)) ||
+ (check_fail && (value & SDCMD_FAIL_FLAG)),
+ 1, 10);
+ if (ret == -ETIMEDOUT)
+ /* if it takes a while make poll interval bigger */
+ ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
+ (!(value & SDCMD_NEW_FLAG)) ||
+ (check_fail && (value & SDCMD_FAIL_FLAG)),
+ 10, max_ms * 1000);
+ if (ret == -ETIMEDOUT)
+ dev_err(dev, "%s: timeout (%d ms)\n", __func__, max_ms);
+
+ return value;
+}
+
+static void bcm2835_finish_request(struct bcm2835_host *host)
+{
+ struct dma_chan *terminate_chan = NULL;
+ struct mmc_request *mrq;
+
+ cancel_delayed_work(&host->timeout_work);
+
+ mrq = host->mrq;
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ host->dma_desc = NULL;
+ terminate_chan = host->dma_chan;
+ host->dma_chan = NULL;
+
+ if (terminate_chan) {
+ int err = dmaengine_terminate_all(terminate_chan);
+
+ if (err)
+ dev_err(&host->pdev->dev,
+ "failed to terminate DMA (%d)\n", err);
+ }
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static
+bool bcm2835_send_command(struct bcm2835_host *host, struct mmc_command *cmd)
+{
+ struct device *dev = &host->pdev->dev;
+ u32 sdcmd, sdhsts;
+ unsigned long timeout;
+
+ WARN_ON(host->cmd);
+
+ sdcmd = bcm2835_read_wait_sdcmd(host, 100, false);
+ if (sdcmd & SDCMD_NEW_FLAG) {
+ dev_err(dev, "previous command never completed.\n");
+ bcm2835_dumpregs(host);
+ cmd->error = -EILSEQ;
+ bcm2835_finish_request(host);
+ return false;
+ }
+
+ if (!cmd->data && cmd->busy_timeout > 9000)
+ timeout = DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+ else
+ timeout = 10 * HZ;
+ schedule_delayed_work(&host->timeout_work, timeout);
+
+ host->cmd = cmd;
+
+ /* Clear any error flags */
+ sdhsts = readl(host->ioaddr + SDHSTS);
+ if (sdhsts & SDHSTS_ERROR_MASK)
+ writel(sdhsts, host->ioaddr + SDHSTS);
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ dev_err(dev, "unsupported response type!\n");
+ cmd->error = -EINVAL;
+ bcm2835_finish_request(host);
+ return false;
+ }
+
+ bcm2835_prepare_data(host, cmd);
+
+ writel(cmd->arg, host->ioaddr + SDARG);
+
+ sdcmd = cmd->opcode & SDCMD_CMD_MASK;
+
+ host->use_busy = false;
+ if (!(cmd->flags & MMC_RSP_PRESENT)) {
+ sdcmd |= SDCMD_NO_RESPONSE;
+ } else {
+ if (cmd->flags & MMC_RSP_136)
+ sdcmd |= SDCMD_LONG_RESPONSE;
+ if (cmd->flags & MMC_RSP_BUSY) {
+ sdcmd |= SDCMD_BUSYWAIT;
+ host->use_busy = true;
+ }
+ }
+
+ if (cmd->data) {
+ if (cmd->data->flags & MMC_DATA_WRITE)
+ sdcmd |= SDCMD_WRITE_CMD;
+ if (cmd->data->flags & MMC_DATA_READ)
+ sdcmd |= SDCMD_READ_CMD;
+ }
+
+ writel(sdcmd | SDCMD_NEW_FLAG, host->ioaddr + SDCMD);
+
+ return true;
+}
+
+static void bcm2835_transfer_complete(struct bcm2835_host *host)
+{
+ struct mmc_data *data;
+
+ WARN_ON(!host->data_complete);
+
+ data = host->data;
+ host->data = NULL;
+
+ /* Need to send CMD12 if -
+ * a) open-ended multiblock transfer (no CMD23)
+ * b) error in multiblock transfer
+ */
+ if (host->mrq->stop && (data->error || !host->use_sbc)) {
+ if (bcm2835_send_command(host, host->mrq->stop)) {
+ /* No busy, so poll for completion */
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+ } else {
+ bcm2835_wait_transfer_complete(host);
+ bcm2835_finish_request(host);
+ }
+}
+
+static void bcm2835_finish_data(struct bcm2835_host *host)
+{
+ struct device *dev = &host->pdev->dev;
+ struct mmc_data *data;
+
+ data = host->data;
+
+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+
+ data->bytes_xfered = data->error ? 0 : (data->blksz * data->blocks);
+
+ host->data_complete = true;
+
+ if (host->cmd) {
+ /* Data managed to finish before the
+ * command completed. Make sure we do
+ * things in the proper order.
+ */
+ dev_dbg(dev, "Finished early - HSTS %08x\n",
+ readl(host->ioaddr + SDHSTS));
+ } else {
+ bcm2835_transfer_complete(host);
+ }
+}
+
+static void bcm2835_finish_command(struct bcm2835_host *host)
+{
+ struct device *dev = &host->pdev->dev;
+ struct mmc_command *cmd = host->cmd;
+ u32 sdcmd;
+
+ sdcmd = bcm2835_read_wait_sdcmd(host, 100, true);
+
+ /* Check for errors */
+ if (sdcmd & SDCMD_NEW_FLAG) {
+ dev_err(dev, "command never completed.\n");
+ bcm2835_dumpregs(host);
+ host->cmd->error = -EIO;
+ bcm2835_finish_request(host);
+ return;
+ } else if (sdcmd & SDCMD_FAIL_FLAG) {
+ u32 sdhsts = readl(host->ioaddr + SDHSTS);
+
+ /* Clear the errors */
+ writel(SDHSTS_ERROR_MASK, host->ioaddr + SDHSTS);
+
+ if (!(sdhsts & SDHSTS_CRC7_ERROR) ||
+ (host->cmd->opcode != MMC_SEND_OP_COND)) {
+ if (sdhsts & SDHSTS_CMD_TIME_OUT) {
+ host->cmd->error = -ETIMEDOUT;
+ } else {
+ dev_err(dev, "unexpected command %d error\n",
+ host->cmd->opcode);
+ bcm2835_dumpregs(host);
+ host->cmd->error = -EILSEQ;
+ }
+ bcm2835_finish_request(host);
+ return;
+ }
+ }
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ cmd->resp[3 - i] =
+ readl(host->ioaddr + SDRSP0 + i * 4);
+ }
+ } else {
+ cmd->resp[0] = readl(host->ioaddr + SDRSP0);
+ }
+ }
+
+ if (cmd == host->mrq->sbc) {
+ /* Finished CMD23, now send actual command. */
+ host->cmd = NULL;
+ if (bcm2835_send_command(host, host->mrq->cmd)) {
+ if (host->data && host->dma_desc)
+ /* DMA transfer starts now, PIO starts
+ * after irq
+ */
+ bcm2835_start_dma(host);
+
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+ } else if (cmd == host->mrq->stop) {
+ /* Finished CMD12 */
+ bcm2835_finish_request(host);
+ } else {
+ /* Processed actual command. */
+ host->cmd = NULL;
+ if (!host->data)
+ bcm2835_finish_request(host);
+ else if (host->data_complete)
+ bcm2835_transfer_complete(host);
+ }
+}
+
+static void bcm2835_timeout(struct work_struct *work)
+{
+ struct delayed_work *d = to_delayed_work(work);
+ struct bcm2835_host *host =
+ container_of(d, struct bcm2835_host, timeout_work);
+ struct device *dev = &host->pdev->dev;
+
+ mutex_lock(&host->mutex);
+
+ if (host->mrq) {
+ dev_err(dev, "timeout waiting for hardware interrupt.\n");
+ bcm2835_dumpregs(host);
+
+ if (host->data) {
+ host->data->error = -ETIMEDOUT;
+ bcm2835_finish_data(host);
+ } else {
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->mrq->cmd->error = -ETIMEDOUT;
+
+ bcm2835_finish_request(host);
+ }
+ }
+
+ mutex_unlock(&host->mutex);
+}
+
+static bool bcm2835_check_cmd_error(struct bcm2835_host *host, u32 intmask)
+{
+ struct device *dev = &host->pdev->dev;
+
+ if (!(intmask & SDHSTS_ERROR_MASK))
+ return false;
+
+ if (!host->cmd)
+ return true;
+
+ dev_err(dev, "sdhost_busy_irq: intmask %08x\n", intmask);
+ if (intmask & SDHSTS_CRC7_ERROR) {
+ host->cmd->error = -EILSEQ;
+ } else if (intmask & (SDHSTS_CRC16_ERROR |
+ SDHSTS_FIFO_ERROR)) {
+ if (host->mrq->data)
+ host->mrq->data->error = -EILSEQ;
+ else
+ host->cmd->error = -EILSEQ;
+ } else if (intmask & SDHSTS_REW_TIME_OUT) {
+ if (host->mrq->data)
+ host->mrq->data->error = -ETIMEDOUT;
+ else
+ host->cmd->error = -ETIMEDOUT;
+ } else if (intmask & SDHSTS_CMD_TIME_OUT) {
+ host->cmd->error = -ETIMEDOUT;
+ }
+ bcm2835_dumpregs(host);
+ return true;
+}
+
+static void bcm2835_check_data_error(struct bcm2835_host *host, u32 intmask)
+{
+ if (!host->data)
+ return;
+ if (intmask & (SDHSTS_CRC16_ERROR | SDHSTS_FIFO_ERROR))
+ host->data->error = -EILSEQ;
+ if (intmask & SDHSTS_REW_TIME_OUT)
+ host->data->error = -ETIMEDOUT;
+}
+
+static void bcm2835_busy_irq(struct bcm2835_host *host)
+{
+ if (WARN_ON(!host->cmd)) {
+ bcm2835_dumpregs(host);
+ return;
+ }
+
+ if (WARN_ON(!host->use_busy)) {
+ bcm2835_dumpregs(host);
+ return;
+ }
+ host->use_busy = false;
+
+ bcm2835_finish_command(host);
+}
+
+static void bcm2835_data_irq(struct bcm2835_host *host, u32 intmask)
+{
+ /* There are no dedicated data/space available interrupt
+ * status bits, so it is necessary to use the single shared
+ * data/space available FIFO status bits. It is therefore not
+ * an error to get here when there is no data transfer in
+ * progress.
+ */
+ if (!host->data)
+ return;
+
+ bcm2835_check_data_error(host, intmask);
+ if (host->data->error)
+ goto finished;
+
+ if (host->data->flags & MMC_DATA_WRITE) {
+ /* Use the block interrupt for writes after the first block */
+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN);
+ host->hcfg |= SDHCFG_BLOCK_IRPT_EN;
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+ bcm2835_transfer_pio(host);
+ } else {
+ bcm2835_transfer_pio(host);
+ host->blocks--;
+ if ((host->blocks == 0) || host->data->error)
+ goto finished;
+ }
+ return;
+
+finished:
+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+}
+
+static void bcm2835_data_threaded_irq(struct bcm2835_host *host)
+{
+ if (!host->data)
+ return;
+ if ((host->blocks == 0) || host->data->error)
+ bcm2835_finish_data(host);
+}
+
+static void bcm2835_block_irq(struct bcm2835_host *host)
+{
+ if (WARN_ON(!host->data)) {
+ bcm2835_dumpregs(host);
+ return;
+ }
+
+ if (!host->dma_desc) {
+ WARN_ON(!host->blocks);
+ if (host->data->error || (--host->blocks == 0))
+ bcm2835_finish_data(host);
+ else
+ bcm2835_transfer_pio(host);
+ } else if (host->data->flags & MMC_DATA_WRITE) {
+ bcm2835_finish_data(host);
+ }
+}
+
+static irqreturn_t bcm2835_irq(int irq, void *dev_id)
+{
+ irqreturn_t result = IRQ_NONE;
+ struct bcm2835_host *host = dev_id;
+ u32 intmask;
+
+ spin_lock(&host->lock);
+
+ intmask = readl(host->ioaddr + SDHSTS);
+
+ writel(SDHSTS_BUSY_IRPT |
+ SDHSTS_BLOCK_IRPT |
+ SDHSTS_SDIO_IRPT |
+ SDHSTS_DATA_FLAG,
+ host->ioaddr + SDHSTS);
+
+ if (intmask & SDHSTS_BLOCK_IRPT) {
+ bcm2835_check_data_error(host, intmask);
+ host->irq_block = true;
+ result = IRQ_WAKE_THREAD;
+ }
+
+ if (intmask & SDHSTS_BUSY_IRPT) {
+ if (!bcm2835_check_cmd_error(host, intmask)) {
+ host->irq_busy = true;
+ result = IRQ_WAKE_THREAD;
+ } else {
+ result = IRQ_HANDLED;
+ }
+ }
+
+ /* There is no true data interrupt status bit, so it is
+ * necessary to qualify the data flag with the interrupt
+ * enable bit.
+ */
+ if ((intmask & SDHSTS_DATA_FLAG) &&
+ (host->hcfg & SDHCFG_DATA_IRPT_EN)) {
+ bcm2835_data_irq(host, intmask);
+ host->irq_data = true;
+ result = IRQ_WAKE_THREAD;
+ }
+
+ spin_unlock(&host->lock);
+
+ return result;
+}
+
+static irqreturn_t bcm2835_threaded_irq(int irq, void *dev_id)
+{
+ struct bcm2835_host *host = dev_id;
+ unsigned long flags;
+ bool block, busy, data;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ block = host->irq_block;
+ busy = host->irq_busy;
+ data = host->irq_data;
+ host->irq_block = false;
+ host->irq_busy = false;
+ host->irq_data = false;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mutex_lock(&host->mutex);
+
+ if (block)
+ bcm2835_block_irq(host);
+ if (busy)
+ bcm2835_busy_irq(host);
+ if (data)
+ bcm2835_data_threaded_irq(host);
+
+ mutex_unlock(&host->mutex);
+
+ return IRQ_HANDLED;
+}
+
+static void bcm2835_dma_complete_work(struct work_struct *work)
+{
+ struct bcm2835_host *host =
+ container_of(work, struct bcm2835_host, dma_work);
+ struct mmc_data *data = host->data;
+
+ mutex_lock(&host->mutex);
+
+ if (host->dma_chan) {
+ dma_unmap_sg(host->dma_chan->device->dev,
+ data->sg, data->sg_len,
+ host->dma_dir);
+
+ host->dma_chan = NULL;
+ }
+
+ if (host->drain_words) {
+ unsigned long flags;
+ void *page;
+ u32 *buf;
+
+ if (host->drain_offset & PAGE_MASK) {
+ host->drain_page += host->drain_offset >> PAGE_SHIFT;
+ host->drain_offset &= ~PAGE_MASK;
+ }
+ local_irq_save(flags);
+ page = kmap_atomic(host->drain_page);
+ buf = page + host->drain_offset;
+
+ while (host->drain_words) {
+ u32 edm = readl(host->ioaddr + SDEDM);
+
+ if ((edm >> 4) & 0x1f)
+ *(buf++) = readl(host->ioaddr + SDDATA);
+ host->drain_words--;
+ }
+
+ kunmap_atomic(page);
+ local_irq_restore(flags);
+ }
+
+ bcm2835_finish_data(host);
+
+ mutex_unlock(&host->mutex);
+}
+
+static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
+{
+ int div;
+
+ /* The SDCDIV register has 11 bits, and holds (div - 2). But
+ * in data mode the max is 50MHz wihout a minimum, and only
+ * the bottom 3 bits are used. Since the switch over is
+ * automatic (unless we have marked the card as slow...),
+ * chosen values have to make sense in both modes. Ident mode
+ * must be 100-400KHz, so can range check the requested
+ * clock. CMD15 must be used to return to data mode, so this
+ * can be monitored.
+ *
+ * clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz
+ * 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz
+ *
+ * 623->400KHz/27.8MHz
+ * reset value (507)->491159/50MHz
+ *
+ * BUT, the 3-bit clock divisor in data mode is too small if
+ * the core clock is higher than 250MHz, so instead use the
+ * SLOW_CARD configuration bit to force the use of the ident
+ * clock divisor at all times.
+ */
+
+ if (clock < 100000) {
+ /* Can't stop the clock, but make it as slow as possible
+ * to show willing
+ */
+ host->cdiv = SDCDIV_MAX_CDIV;
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+ return;
+ }
+
+ div = host->max_clk / clock;
+ if (div < 2)
+ div = 2;
+ if ((host->max_clk / div) > clock)
+ div++;
+ div -= 2;
+
+ if (div > SDCDIV_MAX_CDIV)
+ div = SDCDIV_MAX_CDIV;
+
+ clock = host->max_clk / (div + 2);
+ host->mmc->actual_clock = clock;
+
+ /* Calibrate some delays */
+
+ host->ns_per_fifo_word = (1000000000 / clock) *
+ ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32);
+
+ host->cdiv = div;
+ writel(host->cdiv, host->ioaddr + SDCDIV);
+
+ /* Set the timeout to 500ms */
+ writel(host->mmc->actual_clock / 2, host->ioaddr + SDTOUT);
+}
+
+static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+ struct device *dev = &host->pdev->dev;
+ u32 edm, fsm;
+
+ /* Reset the error statuses in case this is a retry */
+ if (mrq->sbc)
+ mrq->sbc->error = 0;
+ if (mrq->cmd)
+ mrq->cmd->error = 0;
+ if (mrq->data)
+ mrq->data->error = 0;
+ if (mrq->stop)
+ mrq->stop->error = 0;
+
+ if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
+ dev_err(dev, "unsupported block size (%d bytes)\n",
+ mrq->data->blksz);
+ mrq->cmd->error = -EINVAL;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ if (host->use_dma && mrq->data && (mrq->data->blocks > PIO_THRESHOLD))
+ bcm2835_prepare_dma(host, mrq->data);
+
+ mutex_lock(&host->mutex);
+
+ WARN_ON(host->mrq);
+ host->mrq = mrq;
+
+ edm = readl(host->ioaddr + SDEDM);
+ fsm = edm & SDEDM_FSM_MASK;
+
+ if ((fsm != SDEDM_FSM_IDENTMODE) &&
+ (fsm != SDEDM_FSM_DATAMODE)) {
+ dev_err(dev, "previous command (%d) not complete (EDM %08x)\n",
+ readl(host->ioaddr + SDCMD) & SDCMD_CMD_MASK,
+ edm);
+ bcm2835_dumpregs(host);
+ mrq->cmd->error = -EILSEQ;
+ bcm2835_finish_request(host);
+ mutex_unlock(&host->mutex);
+ return;
+ }
+
+ host->use_sbc = !!mrq->sbc && (host->mrq->data->flags & MMC_DATA_READ);
+ if (host->use_sbc) {
+ if (bcm2835_send_command(host, mrq->sbc)) {
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+ } else if (bcm2835_send_command(host, mrq->cmd)) {
+ if (host->data && host->dma_desc) {
+ /* DMA transfer starts now, PIO starts after irq */
+ bcm2835_start_dma(host);
+ }
+
+ if (!host->use_busy)
+ bcm2835_finish_command(host);
+ }
+
+ mutex_unlock(&host->mutex);
+}
+
+static void bcm2835_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct bcm2835_host *host = mmc_priv(mmc);
+
+ mutex_lock(&host->mutex);
+
+ if (!ios->clock || ios->clock != host->clock) {
+ bcm2835_set_clock(host, ios->clock);
+ host->clock = ios->clock;
+ }
+
+ /* set bus width */
+ host->hcfg &= ~SDHCFG_WIDE_EXT_BUS;
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ host->hcfg |= SDHCFG_WIDE_EXT_BUS;
+
+ host->hcfg |= SDHCFG_WIDE_INT_BUS;
+
+ /* Disable clever clock switching, to cope with fast core clocks */
+ host->hcfg |= SDHCFG_SLOW_CARD;
+
+ writel(host->hcfg, host->ioaddr + SDHCFG);
+
+ mutex_unlock(&host->mutex);
+}
+
+static struct mmc_host_ops bcm2835_ops = {
+ .request = bcm2835_request,
+ .set_ios = bcm2835_set_ios,
+ .hw_reset = bcm2835_reset,
+};
+
+static int bcm2835_add_host(struct bcm2835_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ struct device *dev = &host->pdev->dev;
+ char pio_limit_string[20];
+ int ret;
+
+ bcm2835_reset_internal(host);
+
+ mmc->f_max = host->max_clk;
+ mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV;
+
+ mmc->max_busy_timeout = ~0 / (mmc->f_max / 1000);
+
+ dev_dbg(dev, "f_max %d, f_min %d, max_busy_timeout %d\n",
+ mmc->f_max, mmc->f_min, mmc->max_busy_timeout);
+
+ /* host controller capabilities */
+ mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE |
+ MMC_CAP_CMD23;
+
+ spin_lock_init(&host->lock);
+ mutex_init(&host->mutex);
+
+ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) {
+ dev_warn(dev, "unable to initialise DMA channel. Falling back to PIO\n");
+ host->use_dma = false;
+ } else {
+ host->use_dma = true;
+
+ host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_tx.slave_id = 13; /* DREQ channel */
+ host->dma_cfg_tx.direction = DMA_MEM_TO_DEV;
+ host->dma_cfg_tx.src_addr = 0;
+ host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA;
+
+ host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_cfg_rx.slave_id = 13; /* DREQ channel */
+ host->dma_cfg_rx.direction = DMA_DEV_TO_MEM;
+ host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA;
+ host->dma_cfg_rx.dst_addr = 0;
+
+ if (dmaengine_slave_config(host->dma_chan_rxtx,
+ &host->dma_cfg_tx) != 0 ||
+ dmaengine_slave_config(host->dma_chan_rxtx,
+ &host->dma_cfg_rx) != 0)
+ host->use_dma = false;
+ }
+
+ mmc->max_segs = 128;
+ mmc->max_req_size = 524288;
+ mmc->max_seg_size = mmc->max_req_size;
+ mmc->max_blk_size = 1024;
+ mmc->max_blk_count = 65535;
+
+ /* report supported voltage ranges */
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ INIT_WORK(&host->dma_work, bcm2835_dma_complete_work);
+ INIT_DELAYED_WORK(&host->timeout_work, bcm2835_timeout);
+
+ /* Set interrupt enables */
+ host->hcfg = SDHCFG_BUSY_IRPT_EN;
+
+ bcm2835_reset_internal(host);
+
+ ret = request_threaded_irq(host->irq, bcm2835_irq,
+ bcm2835_threaded_irq,
+ 0, mmc_hostname(mmc), host);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ %d: %d\n", host->irq, ret);
+ return ret;
+ }
+
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ free_irq(host->irq, host);
+ return ret;
+ }
+
+ pio_limit_string[0] = '\0';
+ if (host->use_dma && (PIO_THRESHOLD > 0))
+ sprintf(pio_limit_string, " (>%d)", PIO_THRESHOLD);
+ dev_info(dev, "loaded - DMA %s%s\n",
+ host->use_dma ? "enabled" : "disabled", pio_limit_string);
+
+ return 0;
+}
+
+static int bcm2835_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk *clk;
+ struct resource *iomem;
+ struct bcm2835_host *host;
+ struct mmc_host *mmc;
+ const __be32 *regaddr_p;
+ int ret;
+
+ dev_dbg(dev, "%s\n", __func__);
+ mmc = mmc_alloc_host(sizeof(*host), dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ mmc->ops = &bcm2835_ops;
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->pdev = pdev;
+ spin_lock_init(&host->lock);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->ioaddr = devm_ioremap_resource(dev, iomem);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
+ goto err;
+ }
+
+ /* Parse OF address directly to get the physical address for
+ * DMA to our registers.
+ */
+ regaddr_p = of_get_address(pdev->dev.of_node, 0, NULL, NULL);
+ if (!regaddr_p) {
+ dev_err(dev, "Can't get phys address\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ host->phys_addr = be32_to_cpup(regaddr_p);
+
+ host->dma_chan = NULL;
+ host->dma_desc = NULL;
+
+ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx");
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "could not get clk: %d\n", ret);
+ goto err;
+ }
+
+ host->max_clk = clk_get_rate(clk);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq <= 0) {
+ dev_err(dev, "get IRQ failed\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto err;
+
+ ret = bcm2835_add_host(host);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, host);
+
+ dev_dbg(dev, "%s -> OK\n", __func__);
+
+ return 0;
+
+err:
+ dev_dbg(dev, "%s -> err %d\n", __func__, ret);
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static int bcm2835_remove(struct platform_device *pdev)
+{
+ struct bcm2835_host *host = platform_get_drvdata(pdev);
+
+ mmc_remove_host(host->mmc);
+
+ writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD);
+
+ free_irq(host->irq, host);
+
+ cancel_work_sync(&host->dma_work);
+ cancel_delayed_work_sync(&host->timeout_work);
+
+ mmc_free_host(host->mmc);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id bcm2835_match[] = {
+ { .compatible = "brcm,bcm2835-sdhost" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_match);
+
+static struct platform_driver bcm2835_driver = {
+ .probe = bcm2835_probe,
+ .remove = bcm2835_remove,
+ .driver = {
+ .name = "sdhost-bcm2835",
+ .of_match_table = bcm2835_match,
+ },
+};
+module_platform_driver(bcm2835_driver);
+
+MODULE_ALIAS("platform:sdhost-bcm2835");
+MODULE_DESCRIPTION("BCM2835 SDHost driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Phil Elwell");
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree
2017-02-21 9:06 ` Gerd Hoffmann
@ 2017-02-21 9:07 ` Gerd Hoffmann
-1 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ++++++
arch/arm/boot/dts/bcm283x.dtsi | 10 ++++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 0b73f9c..7d89af2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -69,6 +69,12 @@
bus-width = <4>;
};
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index a3106aa..3f4fbff 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -450,6 +450,16 @@
status = "disabled";
};
+ sdhost: mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
hvs@7e400000 {
compatible = "brcm,bcm2835-hvs";
reg = <0x7e400000 0x6000>;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ++++++
arch/arm/boot/dts/bcm283x.dtsi | 10 ++++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 0b73f9c..7d89af2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -69,6 +69,12 @@
bus-width = <4>;
};
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index a3106aa..3f4fbff 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -450,6 +450,16 @@
status = "disabled";
};
+ sdhost: mmc at 7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
hvs at 7e400000 {
compatible = "brcm,bcm2835-hvs";
reg = <0x7e400000 0x6000>;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
arch/arm/configs/bcm2835_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 4b89f4e..3767c24 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -92,6 +92,7 @@ CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 028d2b7..5d13894 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -727,6 +727,7 @@ CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: ulf.hansson-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w, rjui-dY08KVG/lbpWk0Htik3J/w,
sbranden-dY08KVG/lbpWk0Htik3J/w,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
swarren-3lzwWm7+Weoh9ZMKESR00Q, lee-DgEjT+Ai2ygdnm+yROfE0A,
eric-WhKQ6XTQaPysTnJN9+BGXg, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Stefan Wahren,
Gerd Hoffmann
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
arch/arm/configs/bcm2835_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 4b89f4e..3767c24 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -92,6 +92,7 @@ CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 028d2b7..5d13894 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -727,6 +727,7 @@ CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-arm-kernel
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
arch/arm/configs/bcm2835_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 4b89f4e..3767c24 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -92,6 +92,7 @@ CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 028d2b7..5d13894 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -727,6 +727,7 @@ CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig
2017-02-21 9:06 ` Gerd Hoffmann
@ 2017-02-21 9:07 ` Gerd Hoffmann
-1 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 33b744d..75131a6 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -391,6 +391,7 @@ CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-arm-kernel
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 33b744d..75131a6 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -391,6 +391,7 @@ CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost
2017-02-21 9:06 ` Gerd Hoffmann
@ 2017-02-21 9:07 ` Gerd Hoffmann
-1 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
sdcard access with the sdhost controller is faster.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 7d89af2..e6beecb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -65,13 +65,13 @@
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio48>;
- status = "okay";
bus-width = <4>;
};
&sdhost {
pinctrl-names = "default";
pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
bus-width = <4>;
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-arm-kernel
sdcard access with the sdhost controller is faster.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 7d89af2..e6beecb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -65,13 +65,13 @@
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio48>;
- status = "okay";
bus-width = <4>;
};
&sdhost {
pinctrl-names = "default";
pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
bus-width = <4>;
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost
2017-02-21 9:06 ` Gerd Hoffmann
@ 2017-02-21 9:07 ` Gerd Hoffmann
-1 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel, Stefan Wahren, Gerd Hoffmann
For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and
sdhost (handles sdcard).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index c309633..972f14d 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -22,3 +22,20 @@
&uart1 {
status = "okay";
};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost
@ 2017-02-21 9:07 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-02-21 9:07 UTC (permalink / raw)
To: linux-arm-kernel
For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and
sdhost (handles sdcard).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index c309633..972f14d 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -22,3 +22,20 @@
&uart1 {
status = "okay";
};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost
2017-02-21 9:07 ` Gerd Hoffmann
@ 2017-02-21 9:25 ` Baruch Siach
-1 siblings, 0 replies; 40+ messages in thread
From: Baruch Siach @ 2017-02-21 9:25 UTC (permalink / raw)
To: Gerd Hoffmann
Cc: linux-rpi-kernel, mark.rutland, devicetree, ulf.hansson,
f.fainelli, sbranden, swarren, rjui, lee, will.deacon, linux,
linux-kernel, Stefan Wahren, eric, robh+dt,
bcm-kernel-feedback-list, catalin.marinas, linux-mmc,
linux-arm-kernel
Hi Gerd,
On Tue, Feb 21, 2017 at 10:07:06AM +0100, Gerd Hoffmann wrote:
> For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and
> sdhost (handles sdcard).
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> Acked-by: Eric Anholt <eric@anholt.net>
> ---
> arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
Subject prefix should be 'arm64:'.
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost
@ 2017-02-21 9:25 ` Baruch Siach
0 siblings, 0 replies; 40+ messages in thread
From: Baruch Siach @ 2017-02-21 9:25 UTC (permalink / raw)
To: linux-arm-kernel
Hi Gerd,
On Tue, Feb 21, 2017 at 10:07:06AM +0100, Gerd Hoffmann wrote:
> For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and
> sdhost (handles sdcard).
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> Acked-by: Eric Anholt <eric@anholt.net>
> ---
> arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
Subject prefix should be 'arm64:'.
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree
@ 2017-02-21 15:57 ` Stefan Wahren
0 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-02-21 15:57 UTC (permalink / raw)
To: Gerd Hoffmann, linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, eric, linux,
catalin.marinas, will.deacon, linux-mmc, devicetree,
linux-arm-kernel, linux-kernel
Am 21.02.2017 um 10:07 schrieb Gerd Hoffmann:
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> Acked-by: Eric Anholt <eric@anholt.net>
> ---
> arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ++++++
> arch/arm/boot/dts/bcm283x.dtsi | 10 ++++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> index 0b73f9c..7d89af2 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> @@ -69,6 +69,12 @@
> bus-width = <4>;
> };
>
> +&sdhost {
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhost_gpio48>;
> + bus-width = <4>;
> +};
> +
> &pwm {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> index a3106aa..3f4fbff 100644
> --- a/arch/arm/boot/dts/bcm283x.dtsi
> +++ b/arch/arm/boot/dts/bcm283x.dtsi
> @@ -450,6 +450,16 @@
> status = "disabled";
> };
>
> + sdhost: mmc@7e202000 {
> + compatible = "brcm,bcm2835-sdhost";
> + reg = <0x7e202000 0x100>;
> + interrupts = <2 24>;
> + clocks = <&clocks BCM2835_CLOCK_VPU>;
> + dmas = <&dma 13>;
> + dma-names = "rx-tx";
> + status = "disabled";
> + };
> +
> hvs@7e400000 {
> compatible = "brcm,bcm2835-hvs";
> reg = <0x7e400000 0x6000>;
Unfortunately this is still the wrong place regarding to the register
order. So please be placed it between uart0: serial@7e201000 and i2s:
i2s@7e203000.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree
@ 2017-02-21 15:57 ` Stefan Wahren
0 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-02-21 15:57 UTC (permalink / raw)
To: Gerd Hoffmann, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: ulf.hansson-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w, rjui-dY08KVG/lbpWk0Htik3J/w,
sbranden-dY08KVG/lbpWk0Htik3J/w,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
swarren-3lzwWm7+Weoh9ZMKESR00Q, lee-DgEjT+Ai2ygdnm+yROfE0A,
eric-WhKQ6XTQaPysTnJN9+BGXg, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Am 21.02.2017 um 10:07 schrieb Gerd Hoffmann:
> Signed-off-by: Gerd Hoffmann <kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Acked-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
> ---
> arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ++++++
> arch/arm/boot/dts/bcm283x.dtsi | 10 ++++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> index 0b73f9c..7d89af2 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> @@ -69,6 +69,12 @@
> bus-width = <4>;
> };
>
> +&sdhost {
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhost_gpio48>;
> + bus-width = <4>;
> +};
> +
> &pwm {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> index a3106aa..3f4fbff 100644
> --- a/arch/arm/boot/dts/bcm283x.dtsi
> +++ b/arch/arm/boot/dts/bcm283x.dtsi
> @@ -450,6 +450,16 @@
> status = "disabled";
> };
>
> + sdhost: mmc@7e202000 {
> + compatible = "brcm,bcm2835-sdhost";
> + reg = <0x7e202000 0x100>;
> + interrupts = <2 24>;
> + clocks = <&clocks BCM2835_CLOCK_VPU>;
> + dmas = <&dma 13>;
> + dma-names = "rx-tx";
> + status = "disabled";
> + };
> +
> hvs@7e400000 {
> compatible = "brcm,bcm2835-hvs";
> reg = <0x7e400000 0x6000>;
Unfortunately this is still the wrong place regarding to the register
order. So please be placed it between uart0: serial@7e201000 and i2s:
i2s@7e203000.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree
@ 2017-02-21 15:57 ` Stefan Wahren
0 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-02-21 15:57 UTC (permalink / raw)
To: linux-arm-kernel
Am 21.02.2017 um 10:07 schrieb Gerd Hoffmann:
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> Acked-by: Eric Anholt <eric@anholt.net>
> ---
> arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ++++++
> arch/arm/boot/dts/bcm283x.dtsi | 10 ++++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> index 0b73f9c..7d89af2 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> @@ -69,6 +69,12 @@
> bus-width = <4>;
> };
>
> +&sdhost {
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhost_gpio48>;
> + bus-width = <4>;
> +};
> +
> &pwm {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> index a3106aa..3f4fbff 100644
> --- a/arch/arm/boot/dts/bcm283x.dtsi
> +++ b/arch/arm/boot/dts/bcm283x.dtsi
> @@ -450,6 +450,16 @@
> status = "disabled";
> };
>
> + sdhost: mmc at 7e202000 {
> + compatible = "brcm,bcm2835-sdhost";
> + reg = <0x7e202000 0x100>;
> + interrupts = <2 24>;
> + clocks = <&clocks BCM2835_CLOCK_VPU>;
> + dmas = <&dma 13>;
> + dma-names = "rx-tx";
> + status = "disabled";
> + };
> +
> hvs at 7e400000 {
> compatible = "brcm,bcm2835-hvs";
> reg = <0x7e400000 0x6000>;
Unfortunately this is still the wrong place regarding to the register
order. So please be placed it between uart0: serial at 7e201000 and i2s:
i2s at 7e203000.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
2017-02-21 9:07 ` Gerd Hoffmann
(?)
@ 2017-03-01 18:00 ` Eric Anholt
-1 siblings, 0 replies; 40+ messages in thread
From: Eric Anholt @ 2017-03-01 18:00 UTC (permalink / raw)
To: Gerd Hoffmann, linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, linux, catalin.marinas,
will.deacon, linux-mmc, devicetree, linux-arm-kernel,
linux-kernel, Stefan Wahren, Gerd Hoffmann
[-- Attachment #1: Type: text/plain, Size: 1406 bytes --]
Gerd Hoffmann <kraxel@redhat.com> writes:
> From: Eric Anholt <eric@anholt.net>
>
> The 2835 has two SD controllers: The Arasan sdhci controller (supported
> by the iproc driver) and a custom sdhost controller. This patch adds a
> driver for the latter.
>
> The sdhci controller supports both sdcard and sdio. The sdhost
> controller supports the sdcard only, but has better performance. Also
> note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> controller allows to use the sdhci controller for wifi support.
>
> The configuration is done by devicetree via pin muxing. Both SD
> controller are available on the same pins (2 pin groups = pin 22 to 27 +
> pin 48 to 53). So it's possible to use both SD controllers at the same
> time with different pin groups.
>
> The code was originally written by Phil Elwell in the downstream
> Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> out of the original 2055) for inclusion.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
Ulf, what do you need done to this driver patch before it can go in?
The commit message seems like it could use some rewriting at this point
(Personally I would drop the detailed changelogs from Stefan and Gerd,
updating the last paragraph here to give them credit), but what's
important to me is getting the driver in so that distros don't have to
carry this patch for wifi support.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-03-01 18:00 ` Eric Anholt
0 siblings, 0 replies; 40+ messages in thread
From: Eric Anholt @ 2017-03-01 18:00 UTC (permalink / raw)
To: linux-rpi-kernel
Cc: ulf.hansson, robh+dt, mark.rutland, f.fainelli, rjui, sbranden,
bcm-kernel-feedback-list, swarren, lee, linux, catalin.marinas,
will.deacon, linux-mmc, devicetree, linux-arm-kernel,
linux-kernel, Stefan Wahren, Gerd Hoffmann
[-- Attachment #1: Type: text/plain, Size: 1406 bytes --]
Gerd Hoffmann <kraxel@redhat.com> writes:
> From: Eric Anholt <eric@anholt.net>
>
> The 2835 has two SD controllers: The Arasan sdhci controller (supported
> by the iproc driver) and a custom sdhost controller. This patch adds a
> driver for the latter.
>
> The sdhci controller supports both sdcard and sdio. The sdhost
> controller supports the sdcard only, but has better performance. Also
> note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> controller allows to use the sdhci controller for wifi support.
>
> The configuration is done by devicetree via pin muxing. Both SD
> controller are available on the same pins (2 pin groups = pin 22 to 27 +
> pin 48 to 53). So it's possible to use both SD controllers at the same
> time with different pin groups.
>
> The code was originally written by Phil Elwell in the downstream
> Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> out of the original 2055) for inclusion.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
Ulf, what do you need done to this driver patch before it can go in?
The commit message seems like it could use some rewriting at this point
(Personally I would drop the detailed changelogs from Stefan and Gerd,
updating the last paragraph here to give them credit), but what's
important to me is getting the driver in so that distros don't have to
carry this patch for wifi support.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-03-01 18:00 ` Eric Anholt
0 siblings, 0 replies; 40+ messages in thread
From: Eric Anholt @ 2017-03-01 18:00 UTC (permalink / raw)
To: linux-arm-kernel
Gerd Hoffmann <kraxel@redhat.com> writes:
> From: Eric Anholt <eric@anholt.net>
>
> The 2835 has two SD controllers: The Arasan sdhci controller (supported
> by the iproc driver) and a custom sdhost controller. This patch adds a
> driver for the latter.
>
> The sdhci controller supports both sdcard and sdio. The sdhost
> controller supports the sdcard only, but has better performance. Also
> note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> controller allows to use the sdhci controller for wifi support.
>
> The configuration is done by devicetree via pin muxing. Both SD
> controller are available on the same pins (2 pin groups = pin 22 to 27 +
> pin 48 to 53). So it's possible to use both SD controllers at the same
> time with different pin groups.
>
> The code was originally written by Phil Elwell in the downstream
> Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> out of the original 2055) for inclusion.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
Ulf, what do you need done to this driver patch before it can go in?
The commit message seems like it could use some rewriting at this point
(Personally I would drop the detailed changelogs from Stefan and Gerd,
updating the last paragraph here to give them credit), but what's
important to me is getting the driver in so that distros don't have to
carry this patch for wifi support.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170301/2f4adaaf/attachment.sig>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
2017-03-01 18:00 ` Eric Anholt
(?)
@ 2017-03-01 19:21 ` Stefan Wahren
-1 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-03-01 19:21 UTC (permalink / raw)
To: Gerd Hoffmann, Eric Anholt, linux-rpi-kernel
Cc: will.deacon, linux, lee, rjui, robh+dt, linux-arm-kernel,
ulf.hansson, sbranden, linux-kernel, catalin.marinas, linux-mmc,
bcm-kernel-feedback-list, swarren, mark.rutland, f.fainelli,
devicetree
> Eric Anholt <eric@anholt.net> hat am 1. März 2017 um 19:00 geschrieben:
>
>
> Gerd Hoffmann <kraxel@redhat.com> writes:
>
> > From: Eric Anholt <eric@anholt.net>
> >
> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
> > by the iproc driver) and a custom sdhost controller. This patch adds a
> > driver for the latter.
> >
> > The sdhci controller supports both sdcard and sdio. The sdhost
> > controller supports the sdcard only, but has better performance. Also
> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> > controller allows to use the sdhci controller for wifi support.
> >
> > The configuration is done by devicetree via pin muxing. Both SD
> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
> > pin 48 to 53). So it's possible to use both SD controllers at the same
> > time with different pin groups.
> >
> > The code was originally written by Phil Elwell in the downstream
> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> > out of the original 2055) for inclusion.
> >
> > Signed-off-by: Eric Anholt <eric@anholt.net>
>
> Ulf, what do you need done to this driver patch before it can go in?
> The commit message seems like it could use some rewriting at this point
> (Personally I would drop the detailed changelogs from Stefan and Gerd,
> updating the last paragraph here to give them credit), but what's
> important to me is getting the driver in so that distros don't have to
> carry this patch for wifi support.
I'm still working on 3 small patches for this driver:
1. trivial error in a register comment
2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
3. remove unnecessary call to bcm2835_reset_internal
I plan to submit them on Friday.
[1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-03-01 19:21 ` Stefan Wahren
0 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-03-01 19:21 UTC (permalink / raw)
To: Gerd Hoffmann, Eric Anholt, linux-rpi-kernel
Cc: mark.rutland, devicetree, ulf.hansson, f.fainelli, sbranden,
swarren, rjui, lee, will.deacon, linux, linux-kernel, robh+dt,
bcm-kernel-feedback-list, catalin.marinas, linux-mmc,
linux-arm-kernel
> Eric Anholt <eric@anholt.net> hat am 1. März 2017 um 19:00 geschrieben:
>
>
> Gerd Hoffmann <kraxel@redhat.com> writes:
>
> > From: Eric Anholt <eric@anholt.net>
> >
> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
> > by the iproc driver) and a custom sdhost controller. This patch adds a
> > driver for the latter.
> >
> > The sdhci controller supports both sdcard and sdio. The sdhost
> > controller supports the sdcard only, but has better performance. Also
> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> > controller allows to use the sdhci controller for wifi support.
> >
> > The configuration is done by devicetree via pin muxing. Both SD
> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
> > pin 48 to 53). So it's possible to use both SD controllers at the same
> > time with different pin groups.
> >
> > The code was originally written by Phil Elwell in the downstream
> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> > out of the original 2055) for inclusion.
> >
> > Signed-off-by: Eric Anholt <eric@anholt.net>
>
> Ulf, what do you need done to this driver patch before it can go in?
> The commit message seems like it could use some rewriting at this point
> (Personally I would drop the detailed changelogs from Stefan and Gerd,
> updating the last paragraph here to give them credit), but what's
> important to me is getting the driver in so that distros don't have to
> carry this patch for wifi support.
I'm still working on 3 small patches for this driver:
1. trivial error in a register comment
2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
3. remove unnecessary call to bcm2835_reset_internal
I plan to submit them on Friday.
[1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-03-01 19:21 ` Stefan Wahren
0 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-03-01 19:21 UTC (permalink / raw)
To: linux-arm-kernel
> Eric Anholt <eric@anholt.net> hat am 1. M?rz 2017 um 19:00 geschrieben:
>
>
> Gerd Hoffmann <kraxel@redhat.com> writes:
>
> > From: Eric Anholt <eric@anholt.net>
> >
> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
> > by the iproc driver) and a custom sdhost controller. This patch adds a
> > driver for the latter.
> >
> > The sdhci controller supports both sdcard and sdio. The sdhost
> > controller supports the sdcard only, but has better performance. Also
> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> > controller allows to use the sdhci controller for wifi support.
> >
> > The configuration is done by devicetree via pin muxing. Both SD
> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
> > pin 48 to 53). So it's possible to use both SD controllers at the same
> > time with different pin groups.
> >
> > The code was originally written by Phil Elwell in the downstream
> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> > out of the original 2055) for inclusion.
> >
> > Signed-off-by: Eric Anholt <eric@anholt.net>
>
> Ulf, what do you need done to this driver patch before it can go in?
> The commit message seems like it could use some rewriting at this point
> (Personally I would drop the detailed changelogs from Stefan and Gerd,
> updating the last paragraph here to give them credit), but what's
> important to me is getting the driver in so that distros don't have to
> carry this patch for wifi support.
I'm still working on 3 small patches for this driver:
1. trivial error in a register comment
2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
3. remove unnecessary call to bcm2835_reset_internal
I plan to submit them on Friday.
[1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
2017-03-01 19:21 ` Stefan Wahren
@ 2017-03-01 19:31 ` Eric Anholt
-1 siblings, 0 replies; 40+ messages in thread
From: Eric Anholt @ 2017-03-01 19:31 UTC (permalink / raw)
To: Stefan Wahren, Gerd Hoffmann, linux-rpi-kernel
Cc: will.deacon, linux, lee, rjui, robh+dt, linux-arm-kernel,
ulf.hansson, sbranden, linux-kernel, catalin.marinas, linux-mmc,
bcm-kernel-feedback-list, swarren, mark.rutland, f.fainelli,
devicetree
[-- Attachment #1: Type: text/plain, Size: 2141 bytes --]
Stefan Wahren <stefan.wahren@i2se.com> writes:
>> Eric Anholt <eric@anholt.net> hat am 1. März 2017 um 19:00 geschrieben:
>>
>>
>> Gerd Hoffmann <kraxel@redhat.com> writes:
>>
>> > From: Eric Anholt <eric@anholt.net>
>> >
>> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
>> > by the iproc driver) and a custom sdhost controller. This patch adds a
>> > driver for the latter.
>> >
>> > The sdhci controller supports both sdcard and sdio. The sdhost
>> > controller supports the sdcard only, but has better performance. Also
>> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
>> > controller allows to use the sdhci controller for wifi support.
>> >
>> > The configuration is done by devicetree via pin muxing. Both SD
>> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
>> > pin 48 to 53). So it's possible to use both SD controllers at the same
>> > time with different pin groups.
>> >
>> > The code was originally written by Phil Elwell in the downstream
>> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
>> > out of the original 2055) for inclusion.
>> >
>> > Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> Ulf, what do you need done to this driver patch before it can go in?
>> The commit message seems like it could use some rewriting at this point
>> (Personally I would drop the detailed changelogs from Stefan and Gerd,
>> updating the last paragraph here to give them credit), but what's
>> important to me is getting the driver in so that distros don't have to
>> carry this patch for wifi support.
>
> I'm still working on 3 small patches for this driver:
>
> 1. trivial error in a register comment
> 2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
> 3. remove unnecessary call to bcm2835_reset_internal
>
> I plan to submit them on Friday.
>
> [1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
Should any of those changes block merging the current code, though? It
doesn't sound like it to me.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-03-01 19:31 ` Eric Anholt
0 siblings, 0 replies; 40+ messages in thread
From: Eric Anholt @ 2017-03-01 19:31 UTC (permalink / raw)
To: linux-arm-kernel
Stefan Wahren <stefan.wahren@i2se.com> writes:
>> Eric Anholt <eric@anholt.net> hat am 1. M?rz 2017 um 19:00 geschrieben:
>>
>>
>> Gerd Hoffmann <kraxel@redhat.com> writes:
>>
>> > From: Eric Anholt <eric@anholt.net>
>> >
>> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
>> > by the iproc driver) and a custom sdhost controller. This patch adds a
>> > driver for the latter.
>> >
>> > The sdhci controller supports both sdcard and sdio. The sdhost
>> > controller supports the sdcard only, but has better performance. Also
>> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
>> > controller allows to use the sdhci controller for wifi support.
>> >
>> > The configuration is done by devicetree via pin muxing. Both SD
>> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
>> > pin 48 to 53). So it's possible to use both SD controllers at the same
>> > time with different pin groups.
>> >
>> > The code was originally written by Phil Elwell in the downstream
>> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
>> > out of the original 2055) for inclusion.
>> >
>> > Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> Ulf, what do you need done to this driver patch before it can go in?
>> The commit message seems like it could use some rewriting at this point
>> (Personally I would drop the detailed changelogs from Stefan and Gerd,
>> updating the last paragraph here to give them credit), but what's
>> important to me is getting the driver in so that distros don't have to
>> carry this patch for wifi support.
>
> I'm still working on 3 small patches for this driver:
>
> 1. trivial error in a register comment
> 2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
> 3. remove unnecessary call to bcm2835_reset_internal
>
> I plan to submit them on Friday.
>
> [1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
Should any of those changes block merging the current code, though? It
doesn't sound like it to me.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170301/84efa163/attachment.sig>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
2017-03-01 19:31 ` Eric Anholt
(?)
@ 2017-03-01 19:41 ` Stefan Wahren
-1 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-03-01 19:41 UTC (permalink / raw)
To: Gerd Hoffmann, Eric Anholt, linux-rpi-kernel
Cc: will.deacon, rjui, lee, linux, robh+dt, ulf.hansson,
linux-arm-kernel, sbranden, linux-kernel, catalin.marinas,
bcm-kernel-feedback-list, linux-mmc, swarren, mark.rutland,
f.fainelli, devicetree
> Eric Anholt <eric@anholt.net> hat am 1. März 2017 um 20:31 geschrieben:
>
>
> Stefan Wahren <stefan.wahren@i2se.com> writes:
>
> >> Eric Anholt <eric@anholt.net> hat am 1. März 2017 um 19:00 geschrieben:
> >>
> >>
> >> Gerd Hoffmann <kraxel@redhat.com> writes:
> >>
> >> > From: Eric Anholt <eric@anholt.net>
> >> >
> >> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
> >> > by the iproc driver) and a custom sdhost controller. This patch adds a
> >> > driver for the latter.
> >> >
> >> > The sdhci controller supports both sdcard and sdio. The sdhost
> >> > controller supports the sdcard only, but has better performance. Also
> >> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> >> > controller allows to use the sdhci controller for wifi support.
> >> >
> >> > The configuration is done by devicetree via pin muxing. Both SD
> >> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
> >> > pin 48 to 53). So it's possible to use both SD controllers at the same
> >> > time with different pin groups.
> >> >
> >> > The code was originally written by Phil Elwell in the downstream
> >> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> >> > out of the original 2055) for inclusion.
> >> >
> >> > Signed-off-by: Eric Anholt <eric@anholt.net>
> >>
> >> Ulf, what do you need done to this driver patch before it can go in?
> >> The commit message seems like it could use some rewriting at this point
> >> (Personally I would drop the detailed changelogs from Stefan and Gerd,
> >> updating the last paragraph here to give them credit), but what's
> >> important to me is getting the driver in so that distros don't have to
> >> carry this patch for wifi support.
> >
> > I'm still working on 3 small patches for this driver:
> >
> > 1. trivial error in a register comment
> > 2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
> > 3. remove unnecessary call to bcm2835_reset_internal
> >
> > I plan to submit them on Friday.
> >
> > [1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
>
> Should any of those changes block merging the current code, though?
No, but the recursion about bcm2835_finish_command() and bcm2835_transfer_complete() is still there.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-03-01 19:41 ` Stefan Wahren
0 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-03-01 19:41 UTC (permalink / raw)
To: Gerd Hoffmann, Eric Anholt, linux-rpi-kernel
Cc: mark.rutland, devicetree, ulf.hansson, f.fainelli, sbranden,
swarren, rjui, lee, will.deacon, linux, linux-kernel, robh+dt,
bcm-kernel-feedback-list, catalin.marinas, linux-mmc,
linux-arm-kernel
> Eric Anholt <eric@anholt.net> hat am 1. März 2017 um 20:31 geschrieben:
>
>
> Stefan Wahren <stefan.wahren@i2se.com> writes:
>
> >> Eric Anholt <eric@anholt.net> hat am 1. März 2017 um 19:00 geschrieben:
> >>
> >>
> >> Gerd Hoffmann <kraxel@redhat.com> writes:
> >>
> >> > From: Eric Anholt <eric@anholt.net>
> >> >
> >> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
> >> > by the iproc driver) and a custom sdhost controller. This patch adds a
> >> > driver for the latter.
> >> >
> >> > The sdhci controller supports both sdcard and sdio. The sdhost
> >> > controller supports the sdcard only, but has better performance. Also
> >> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> >> > controller allows to use the sdhci controller for wifi support.
> >> >
> >> > The configuration is done by devicetree via pin muxing. Both SD
> >> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
> >> > pin 48 to 53). So it's possible to use both SD controllers at the same
> >> > time with different pin groups.
> >> >
> >> > The code was originally written by Phil Elwell in the downstream
> >> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> >> > out of the original 2055) for inclusion.
> >> >
> >> > Signed-off-by: Eric Anholt <eric@anholt.net>
> >>
> >> Ulf, what do you need done to this driver patch before it can go in?
> >> The commit message seems like it could use some rewriting at this point
> >> (Personally I would drop the detailed changelogs from Stefan and Gerd,
> >> updating the last paragraph here to give them credit), but what's
> >> important to me is getting the driver in so that distros don't have to
> >> carry this patch for wifi support.
> >
> > I'm still working on 3 small patches for this driver:
> >
> > 1. trivial error in a register comment
> > 2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
> > 3. remove unnecessary call to bcm2835_reset_internal
> >
> > I plan to submit them on Friday.
> >
> > [1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
>
> Should any of those changes block merging the current code, though?
No, but the recursion about bcm2835_finish_command() and bcm2835_transfer_complete() is still there.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.
@ 2017-03-01 19:41 ` Stefan Wahren
0 siblings, 0 replies; 40+ messages in thread
From: Stefan Wahren @ 2017-03-01 19:41 UTC (permalink / raw)
To: linux-arm-kernel
> Eric Anholt <eric@anholt.net> hat am 1. M?rz 2017 um 20:31 geschrieben:
>
>
> Stefan Wahren <stefan.wahren@i2se.com> writes:
>
> >> Eric Anholt <eric@anholt.net> hat am 1. M?rz 2017 um 19:00 geschrieben:
> >>
> >>
> >> Gerd Hoffmann <kraxel@redhat.com> writes:
> >>
> >> > From: Eric Anholt <eric@anholt.net>
> >> >
> >> > The 2835 has two SD controllers: The Arasan sdhci controller (supported
> >> > by the iproc driver) and a custom sdhost controller. This patch adds a
> >> > driver for the latter.
> >> >
> >> > The sdhci controller supports both sdcard and sdio. The sdhost
> >> > controller supports the sdcard only, but has better performance. Also
> >> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
> >> > controller allows to use the sdhci controller for wifi support.
> >> >
> >> > The configuration is done by devicetree via pin muxing. Both SD
> >> > controller are available on the same pins (2 pin groups = pin 22 to 27 +
> >> > pin 48 to 53). So it's possible to use both SD controllers at the same
> >> > time with different pin groups.
> >> >
> >> > The code was originally written by Phil Elwell in the downstream
> >> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines
> >> > out of the original 2055) for inclusion.
> >> >
> >> > Signed-off-by: Eric Anholt <eric@anholt.net>
> >>
> >> Ulf, what do you need done to this driver patch before it can go in?
> >> The commit message seems like it could use some rewriting at this point
> >> (Personally I would drop the detailed changelogs from Stefan and Gerd,
> >> updating the last paragraph here to give them credit), but what's
> >> important to me is getting the driver in so that distros don't have to
> >> carry this patch for wifi support.
> >
> > I'm still working on 3 small patches for this driver:
> >
> > 1. trivial error in a register comment
> > 2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1])
> > 3. remove unnecessary call to bcm2835_reset_internal
> >
> > I plan to submit them on Friday.
> >
> > [1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec
>
> Should any of those changes block merging the current code, though?
No, but the recursion about bcm2835_finish_command() and bcm2835_transfer_complete() is still there.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
2017-02-21 9:06 ` Gerd Hoffmann
@ 2017-03-14 14:22 ` Peter Robinson
-1 siblings, 0 replies; 40+ messages in thread
From: Peter Robinson @ 2017-03-14 14:22 UTC (permalink / raw)
To: Gerd Hoffmann
Cc: linux-rpi-kernel, mark.rutland, devicetree, ulf.hansson,
f.fainelli, sbranden, rjui, lee, will.deacon, linux,
linux-kernel, robh+dt, bcm-kernel-feedback-list, catalin.marinas,
linux-mmc, linux-arm-kernel
Hi Gerd,
> Next version if the bcm2835 sdhost patch series.
>
> New in v3:
> * squashed in cleanups by Stefan.
> * use one dma channel only.
> * improve commit messages.
>
> New in v2:
> * DMA fixed.
> * updated docs (kconfig, file comment, commit message) clarifying
> the two sd controller situation.
> * some code cleanups, as pointed out by Stefan.
> * dt bindings use mmc@... now.
> * added patches to update defconfigs.
> * added patch for rpi3 device tree, so wifi is actually enabled.
>
> please review & test,
> Gerd
>
> Eric Anholt (2):
> dt-bindings: Add binding for brcm,bcm2835-sdhost.
> mmc: bcm2835: Add new driver for the sdhost controller.
>
> Gerd Hoffmann (5):
> mmc: bcm2835: add sdhost controller to devicetree
> arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and
> multi_v7_defconfig
> arm64: set CONFIG_MMC_BCM2835=y in defconfig
> ARM: dts: bcm283x: switch from &sdhci to &sdhost
> ARM: dts: bcm2837: add &sdhci and &sdhost
I know there's a v4, which is the one I tested, but I don't see it on
the rpi list. A few things I've found.
First the flipping of the mmc host driver for the SD card slot will
cause issues for users that build it as a module. When I tested this
on Fedora the first update I ended up with a system that didn't boot.
I'm handling in Fedora with a dracut snippet which will pull both in
both until that settles down.
Also i often see the device hang for a long period when systemd probes
for rfkill status, sometimes it needs to be reset but it generally
gets there.
Finally also seeing the following crash with the patches on 4.11rc2
[ 6.337148] sdhci: Secure Digital Host Controller Interface driver
[ 6.349263] sdhci: Copyright(c) Pierre Ossman
[ 6.362401] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.381331] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 6.412548] mmc1: SDHCI controller on 3f300000.sdhci
[3f300000.sdhci] using PIO
[ 6.445766] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 6.460651] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.473431] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.487820] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 6.509590] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 6.511929] mmc0: new high speed SDHC card at address aaaa
[ 6.527859] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 6.528991] ------------[ cut here ]------------
[ 6.529018] WARNING: CPU: 2 PID: 326 at kernel/workqueue.c:2417
check_flush_dependency+0xac/0x134
[ 6.529033] workqueue: PF_MEMALLOC task 326(mmcqd/0) is flushing
!WQ_MEM_RECLAIM events:drain_local_pages_wq
[ 6.529036] Modules linked in: mmc_block(+) sdhci_iproc sdhci_pltfm
sdhci pwm_bcm2835 bcm2835 i2c_bcm2835 mmc_core bcm2835_dma i2c_dev
[ 6.529075] CPU: 2 PID: 326 Comm: mmcqd/0 Not tainted
4.11.0-0.rc2.git0.1.fc26.armv7hl #1
[ 6.529079] Hardware name: Generic DT based system
[ 6.529106] [<c0311708>] (unwind_backtrace) from [<c030c438>]
(show_stack+0x18/0x1c)
[ 6.529122] [<c030c438>] (show_stack) from [<c0639b44>]
(dump_stack+0x80/0xa0)
[ 6.529137] [<c0639b44>] (dump_stack) from [<c034ca3c>] (__warn+0xe4/0x104)
[ 6.529150] [<c034ca3c>] (__warn) from [<c034ca98>]
(warn_slowpath_fmt+0x3c/0x4c)
[ 6.529166] [<c034ca98>] (warn_slowpath_fmt) from [<c0363b2c>]
(check_flush_dependency+0xac/0x134)
[ 6.529184] [<c0363b2c>] (check_flush_dependency) from [<c036433c>]
(flush_work+0xa0/0x178)
[ 6.529201] [<c036433c>] (flush_work) from [<c0458084>]
(drain_all_pages+0x1a8/0x1cc)
[ 6.529221] [<c0458084>] (drain_all_pages) from [<c04b1d90>]
(start_isolate_page_range+0x168/0x1b4)
[ 6.529239] [<c04b1d90>] (start_isolate_page_range) from
[<c045b854>] (alloc_contig_range+0xd4/0x314)
[ 6.529258] [<c045b854>] (alloc_contig_range) from [<c04b6660>]
(cma_alloc+0x188/0x300)
[ 6.529275] [<c04b6660>] (cma_alloc) from [<c03161e8>]
(__alloc_from_contiguous+0x40/0xd8)
[ 6.529290] [<c03161e8>] (__alloc_from_contiguous) from
[<c03162bc>] (cma_allocator_alloc+0x3c/0x44)
[ 6.529303] [<c03162bc>] (cma_allocator_alloc) from [<c0316504>]
(__dma_alloc+0x1d4/0x2f0)
[ 6.529317] [<c0316504>] (__dma_alloc) from [<c0316698>]
(arm_dma_alloc+0x3c/0x48)
[ 6.529331] [<c0316698>] (arm_dma_alloc) from [<c049d120>]
(dma_pool_alloc+0x124/0x240)
[ 6.529356] [<c049d120>] (dma_pool_alloc) from [<bf009568>]
(bcm2835_dma_create_cb_chain+0xb0/0x1dc [bcm2835_dma])
[ 6.529385] [<bf009568>] (bcm2835_dma_create_cb_chain
[bcm2835_dma]) from [<bf009ad4>] (bcm2835_dma_prep_slave_sg+0xf0/0x25c
[bcm2835_dma])
[ 6.529418] [<bf009ad4>] (bcm2835_dma_prep_slave_sg [bcm2835_dma])
from [<bf04af04>] (bcm2835_request+0x2a4/0x3f4 [bcm2835])
[ 6.529548] [<bf04af04>] (bcm2835_request [bcm2835]) from
[<bf0145d0>] (mmc_start_request+0x1f8/0x264 [mmc_core])
[ 6.529756] [<bf0145d0>] (mmc_start_request [mmc_core]) from
[<bf016204>] (mmc_start_areq+0x2c8/0x318 [mmc_core])
[ 6.529890] [<bf016204>] (mmc_start_areq [mmc_core]) from
[<bf07fa1c>] (mmc_blk_issue_rw_rq+0xc0/0x308 [mmc_block])
[ 6.529943] [<bf07fa1c>] (mmc_blk_issue_rw_rq [mmc_block]) from
[<bf080f84>] (mmc_blk_issue_rq+0x418/0x428 [mmc_block])
[ 6.529997] [<bf080f84>] (mmc_blk_issue_rq [mmc_block]) from
[<bf081138>] (mmc_queue_thread+0x148/0x1bc [mmc_block])
[ 6.530031] [<bf081138>] (mmc_queue_thread [mmc_block]) from
[<c036ae30>] (kthread+0x120/0x138)
[ 6.530049] [<c036ae30>] (kthread) from [<c0307e58>]
(ret_from_fork+0x14/0x3c)
[ 6.530055] ---[ end trace 221a5a14ca55fa22 ]---
[ 6.545765] mmcblk0: p1 p2 p3 p4
[ 6.566015] random: fast init done
[ 6.623699] mmc1: new high speed SDIO card at address 0001
Other than that you can add a Tested-by for me:
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Peter
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
@ 2017-03-14 14:22 ` Peter Robinson
0 siblings, 0 replies; 40+ messages in thread
From: Peter Robinson @ 2017-03-14 14:22 UTC (permalink / raw)
To: linux-arm-kernel
Hi Gerd,
> Next version if the bcm2835 sdhost patch series.
>
> New in v3:
> * squashed in cleanups by Stefan.
> * use one dma channel only.
> * improve commit messages.
>
> New in v2:
> * DMA fixed.
> * updated docs (kconfig, file comment, commit message) clarifying
> the two sd controller situation.
> * some code cleanups, as pointed out by Stefan.
> * dt bindings use mmc at ... now.
> * added patches to update defconfigs.
> * added patch for rpi3 device tree, so wifi is actually enabled.
>
> please review & test,
> Gerd
>
> Eric Anholt (2):
> dt-bindings: Add binding for brcm,bcm2835-sdhost.
> mmc: bcm2835: Add new driver for the sdhost controller.
>
> Gerd Hoffmann (5):
> mmc: bcm2835: add sdhost controller to devicetree
> arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and
> multi_v7_defconfig
> arm64: set CONFIG_MMC_BCM2835=y in defconfig
> ARM: dts: bcm283x: switch from &sdhci to &sdhost
> ARM: dts: bcm2837: add &sdhci and &sdhost
I know there's a v4, which is the one I tested, but I don't see it on
the rpi list. A few things I've found.
First the flipping of the mmc host driver for the SD card slot will
cause issues for users that build it as a module. When I tested this
on Fedora the first update I ended up with a system that didn't boot.
I'm handling in Fedora with a dracut snippet which will pull both in
both until that settles down.
Also i often see the device hang for a long period when systemd probes
for rfkill status, sometimes it needs to be reset but it generally
gets there.
Finally also seeing the following crash with the patches on 4.11rc2
[ 6.337148] sdhci: Secure Digital Host Controller Interface driver
[ 6.349263] sdhci: Copyright(c) Pierre Ossman
[ 6.362401] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.381331] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 6.412548] mmc1: SDHCI controller on 3f300000.sdhci
[3f300000.sdhci] using PIO
[ 6.445766] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 6.460651] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.473431] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.487820] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 6.509590] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 6.511929] mmc0: new high speed SDHC card at address aaaa
[ 6.527859] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 6.528991] ------------[ cut here ]------------
[ 6.529018] WARNING: CPU: 2 PID: 326 at kernel/workqueue.c:2417
check_flush_dependency+0xac/0x134
[ 6.529033] workqueue: PF_MEMALLOC task 326(mmcqd/0) is flushing
!WQ_MEM_RECLAIM events:drain_local_pages_wq
[ 6.529036] Modules linked in: mmc_block(+) sdhci_iproc sdhci_pltfm
sdhci pwm_bcm2835 bcm2835 i2c_bcm2835 mmc_core bcm2835_dma i2c_dev
[ 6.529075] CPU: 2 PID: 326 Comm: mmcqd/0 Not tainted
4.11.0-0.rc2.git0.1.fc26.armv7hl #1
[ 6.529079] Hardware name: Generic DT based system
[ 6.529106] [<c0311708>] (unwind_backtrace) from [<c030c438>]
(show_stack+0x18/0x1c)
[ 6.529122] [<c030c438>] (show_stack) from [<c0639b44>]
(dump_stack+0x80/0xa0)
[ 6.529137] [<c0639b44>] (dump_stack) from [<c034ca3c>] (__warn+0xe4/0x104)
[ 6.529150] [<c034ca3c>] (__warn) from [<c034ca98>]
(warn_slowpath_fmt+0x3c/0x4c)
[ 6.529166] [<c034ca98>] (warn_slowpath_fmt) from [<c0363b2c>]
(check_flush_dependency+0xac/0x134)
[ 6.529184] [<c0363b2c>] (check_flush_dependency) from [<c036433c>]
(flush_work+0xa0/0x178)
[ 6.529201] [<c036433c>] (flush_work) from [<c0458084>]
(drain_all_pages+0x1a8/0x1cc)
[ 6.529221] [<c0458084>] (drain_all_pages) from [<c04b1d90>]
(start_isolate_page_range+0x168/0x1b4)
[ 6.529239] [<c04b1d90>] (start_isolate_page_range) from
[<c045b854>] (alloc_contig_range+0xd4/0x314)
[ 6.529258] [<c045b854>] (alloc_contig_range) from [<c04b6660>]
(cma_alloc+0x188/0x300)
[ 6.529275] [<c04b6660>] (cma_alloc) from [<c03161e8>]
(__alloc_from_contiguous+0x40/0xd8)
[ 6.529290] [<c03161e8>] (__alloc_from_contiguous) from
[<c03162bc>] (cma_allocator_alloc+0x3c/0x44)
[ 6.529303] [<c03162bc>] (cma_allocator_alloc) from [<c0316504>]
(__dma_alloc+0x1d4/0x2f0)
[ 6.529317] [<c0316504>] (__dma_alloc) from [<c0316698>]
(arm_dma_alloc+0x3c/0x48)
[ 6.529331] [<c0316698>] (arm_dma_alloc) from [<c049d120>]
(dma_pool_alloc+0x124/0x240)
[ 6.529356] [<c049d120>] (dma_pool_alloc) from [<bf009568>]
(bcm2835_dma_create_cb_chain+0xb0/0x1dc [bcm2835_dma])
[ 6.529385] [<bf009568>] (bcm2835_dma_create_cb_chain
[bcm2835_dma]) from [<bf009ad4>] (bcm2835_dma_prep_slave_sg+0xf0/0x25c
[bcm2835_dma])
[ 6.529418] [<bf009ad4>] (bcm2835_dma_prep_slave_sg [bcm2835_dma])
from [<bf04af04>] (bcm2835_request+0x2a4/0x3f4 [bcm2835])
[ 6.529548] [<bf04af04>] (bcm2835_request [bcm2835]) from
[<bf0145d0>] (mmc_start_request+0x1f8/0x264 [mmc_core])
[ 6.529756] [<bf0145d0>] (mmc_start_request [mmc_core]) from
[<bf016204>] (mmc_start_areq+0x2c8/0x318 [mmc_core])
[ 6.529890] [<bf016204>] (mmc_start_areq [mmc_core]) from
[<bf07fa1c>] (mmc_blk_issue_rw_rq+0xc0/0x308 [mmc_block])
[ 6.529943] [<bf07fa1c>] (mmc_blk_issue_rw_rq [mmc_block]) from
[<bf080f84>] (mmc_blk_issue_rq+0x418/0x428 [mmc_block])
[ 6.529997] [<bf080f84>] (mmc_blk_issue_rq [mmc_block]) from
[<bf081138>] (mmc_queue_thread+0x148/0x1bc [mmc_block])
[ 6.530031] [<bf081138>] (mmc_queue_thread [mmc_block]) from
[<c036ae30>] (kthread+0x120/0x138)
[ 6.530049] [<c036ae30>] (kthread) from [<c0307e58>]
(ret_from_fork+0x14/0x3c)
[ 6.530055] ---[ end trace 221a5a14ca55fa22 ]---
[ 6.545765] mmcblk0: p1 p2 p3 p4
[ 6.566015] random: fast init done
[ 6.623699] mmc1: new high speed SDIO card at address 0001
Other than that you can add a Tested-by for me:
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Peter
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
@ 2017-03-15 8:21 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-03-15 8:21 UTC (permalink / raw)
To: Peter Robinson
Cc: linux-rpi-kernel, mark.rutland, devicetree, ulf.hansson,
f.fainelli, sbranden, rjui, lee, will.deacon, linux,
linux-kernel, robh+dt, bcm-kernel-feedback-list, catalin.marinas,
linux-mmc, linux-arm-kernel
Hi,
> First the flipping of the mmc host driver for the SD card slot will
> cause issues for users that build it as a module. When I tested this
> on Fedora the first update I ended up with a system that didn't boot.
Yep, switching drivers is a pain point here indeed.
Possibly we could fix that by adding a MODULE_SOFTDEP() to the iproc
driver? Comments? Better ideas?
> Also i often see the device hang for a long period when systemd probes
> for rfkill status, sometimes it needs to be reset but it generally
> gets there.
What device is that? rpi3 with wifi?
> [ 6.529079] Hardware name: Generic DT based system
> [ 6.529106] [<c0311708>] (unwind_backtrace) from [<c030c438>]
> (show_stack+0x18/0x1c)
> [ 6.529122] [<c030c438>] (show_stack) from [<c0639b44>]
> (dump_stack+0x80/0xa0)
> [ 6.529137] [<c0639b44>] (dump_stack) from [<c034ca3c>] (__warn+0xe4/0x104)
> [ 6.529150] [<c034ca3c>] (__warn) from [<c034ca98>]
> (warn_slowpath_fmt+0x3c/0x4c)
> [ 6.529166] [<c034ca98>] (warn_slowpath_fmt) from [<c0363b2c>]
> (check_flush_dependency+0xac/0x134)
> [ 6.529184] [<c0363b2c>] (check_flush_dependency) from [<c036433c>]
> (flush_work+0xa0/0x178)
> [ 6.529201] [<c036433c>] (flush_work) from [<c0458084>]
> (drain_all_pages+0x1a8/0x1cc)
> [ 6.529221] [<c0458084>] (drain_all_pages) from [<c04b1d90>]
> (start_isolate_page_range+0x168/0x1b4)
> [ 6.529239] [<c04b1d90>] (start_isolate_page_range) from
> [<c045b854>] (alloc_contig_range+0xd4/0x314)
> [ 6.529258] [<c045b854>] (alloc_contig_range) from [<c04b6660>]
> (cma_alloc+0x188/0x300)
> [ 6.529275] [<c04b6660>] (cma_alloc) from [<c03161e8>]
> (__alloc_from_contiguous+0x40/0xd8)
> [ 6.529290] [<c03161e8>] (__alloc_from_contiguous) from
> [<c03162bc>] (cma_allocator_alloc+0x3c/0x44)
> [ 6.529303] [<c03162bc>] (cma_allocator_alloc) from [<c0316504>]
> (__dma_alloc+0x1d4/0x2f0)
> [ 6.529317] [<c0316504>] (__dma_alloc) from [<c0316698>]
> (arm_dma_alloc+0x3c/0x48)
> [ 6.529331] [<c0316698>] (arm_dma_alloc) from [<c049d120>]
> (dma_pool_alloc+0x124/0x240)
> [ 6.529356] [<c049d120>] (dma_pool_alloc) from [<bf009568>]
> (bcm2835_dma_create_cb_chain+0xb0/0x1dc [bcm2835_dma])
> [ 6.529385] [<bf009568>] (bcm2835_dma_create_cb_chain
> [bcm2835_dma]) from [<bf009ad4>] (bcm2835_dma_prep_slave_sg+0xf0/0x25c
> [bcm2835_dma])
> [ 6.529418] [<bf009ad4>] (bcm2835_dma_prep_slave_sg [bcm2835_dma])
> from [<bf04af04>] (bcm2835_request+0x2a4/0x3f4 [bcm2835])
> [ 6.529548] [<bf04af04>] (bcm2835_request [bcm2835]) from
> [<bf0145d0>] (mmc_start_request+0x1f8/0x264 [mmc_core])
> [ 6.529756] [<bf0145d0>] (mmc_start_request [mmc_core]) from
> [<bf016204>] (mmc_start_areq+0x2c8/0x318 [mmc_core])
> [ 6.529890] [<bf016204>] (mmc_start_areq [mmc_core]) from
> [<bf07fa1c>] (mmc_blk_issue_rw_rq+0xc0/0x308 [mmc_block])
> [ 6.529943] [<bf07fa1c>] (mmc_blk_issue_rw_rq [mmc_block]) from
> [<bf080f84>] (mmc_blk_issue_rq+0x418/0x428 [mmc_block])
> [ 6.529997] [<bf080f84>] (mmc_blk_issue_rq [mmc_block]) from
> [<bf081138>] (mmc_queue_thread+0x148/0x1bc [mmc_block])
> [ 6.530031] [<bf081138>] (mmc_queue_thread [mmc_block]) from
> [<c036ae30>] (kthread+0x120/0x138)
> [ 6.530049] [<c036ae30>] (kthread) from [<c0307e58>]
> (ret_from_fork+0x14/0x3c)
> [ 6.530055] ---[ end trace 221a5a14ca55fa22 ]---
> [ 6.545765] mmcblk0: p1 p2 p3 p4
> [ 6.566015] random: fast init done
> [ 6.623699] mmc1: new high speed SDIO card at address 0001
Looks more like a cma allocator issue on a quick glance.
cheers,
Gerd
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
@ 2017-03-15 8:21 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-03-15 8:21 UTC (permalink / raw)
To: Peter Robinson
Cc: linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
ulf.hansson-QSEj5FYQhm4dnm+yROfE0A,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w,
sbranden-dY08KVG/lbpWk0Htik3J/w, rjui-dY08KVG/lbpWk0Htik3J/w,
lee-DgEjT+Ai2ygdnm+yROfE0A, will.deacon-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
catalin.marinas-5wv7dgnIgG8, linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Hi,
> First the flipping of the mmc host driver for the SD card slot will
> cause issues for users that build it as a module. When I tested this
> on Fedora the first update I ended up with a system that didn't boot.
Yep, switching drivers is a pain point here indeed.
Possibly we could fix that by adding a MODULE_SOFTDEP() to the iproc
driver? Comments? Better ideas?
> Also i often see the device hang for a long period when systemd probes
> for rfkill status, sometimes it needs to be reset but it generally
> gets there.
What device is that? rpi3 with wifi?
> [ 6.529079] Hardware name: Generic DT based system
> [ 6.529106] [<c0311708>] (unwind_backtrace) from [<c030c438>]
> (show_stack+0x18/0x1c)
> [ 6.529122] [<c030c438>] (show_stack) from [<c0639b44>]
> (dump_stack+0x80/0xa0)
> [ 6.529137] [<c0639b44>] (dump_stack) from [<c034ca3c>] (__warn+0xe4/0x104)
> [ 6.529150] [<c034ca3c>] (__warn) from [<c034ca98>]
> (warn_slowpath_fmt+0x3c/0x4c)
> [ 6.529166] [<c034ca98>] (warn_slowpath_fmt) from [<c0363b2c>]
> (check_flush_dependency+0xac/0x134)
> [ 6.529184] [<c0363b2c>] (check_flush_dependency) from [<c036433c>]
> (flush_work+0xa0/0x178)
> [ 6.529201] [<c036433c>] (flush_work) from [<c0458084>]
> (drain_all_pages+0x1a8/0x1cc)
> [ 6.529221] [<c0458084>] (drain_all_pages) from [<c04b1d90>]
> (start_isolate_page_range+0x168/0x1b4)
> [ 6.529239] [<c04b1d90>] (start_isolate_page_range) from
> [<c045b854>] (alloc_contig_range+0xd4/0x314)
> [ 6.529258] [<c045b854>] (alloc_contig_range) from [<c04b6660>]
> (cma_alloc+0x188/0x300)
> [ 6.529275] [<c04b6660>] (cma_alloc) from [<c03161e8>]
> (__alloc_from_contiguous+0x40/0xd8)
> [ 6.529290] [<c03161e8>] (__alloc_from_contiguous) from
> [<c03162bc>] (cma_allocator_alloc+0x3c/0x44)
> [ 6.529303] [<c03162bc>] (cma_allocator_alloc) from [<c0316504>]
> (__dma_alloc+0x1d4/0x2f0)
> [ 6.529317] [<c0316504>] (__dma_alloc) from [<c0316698>]
> (arm_dma_alloc+0x3c/0x48)
> [ 6.529331] [<c0316698>] (arm_dma_alloc) from [<c049d120>]
> (dma_pool_alloc+0x124/0x240)
> [ 6.529356] [<c049d120>] (dma_pool_alloc) from [<bf009568>]
> (bcm2835_dma_create_cb_chain+0xb0/0x1dc [bcm2835_dma])
> [ 6.529385] [<bf009568>] (bcm2835_dma_create_cb_chain
> [bcm2835_dma]) from [<bf009ad4>] (bcm2835_dma_prep_slave_sg+0xf0/0x25c
> [bcm2835_dma])
> [ 6.529418] [<bf009ad4>] (bcm2835_dma_prep_slave_sg [bcm2835_dma])
> from [<bf04af04>] (bcm2835_request+0x2a4/0x3f4 [bcm2835])
> [ 6.529548] [<bf04af04>] (bcm2835_request [bcm2835]) from
> [<bf0145d0>] (mmc_start_request+0x1f8/0x264 [mmc_core])
> [ 6.529756] [<bf0145d0>] (mmc_start_request [mmc_core]) from
> [<bf016204>] (mmc_start_areq+0x2c8/0x318 [mmc_core])
> [ 6.529890] [<bf016204>] (mmc_start_areq [mmc_core]) from
> [<bf07fa1c>] (mmc_blk_issue_rw_rq+0xc0/0x308 [mmc_block])
> [ 6.529943] [<bf07fa1c>] (mmc_blk_issue_rw_rq [mmc_block]) from
> [<bf080f84>] (mmc_blk_issue_rq+0x418/0x428 [mmc_block])
> [ 6.529997] [<bf080f84>] (mmc_blk_issue_rq [mmc_block]) from
> [<bf081138>] (mmc_queue_thread+0x148/0x1bc [mmc_block])
> [ 6.530031] [<bf081138>] (mmc_queue_thread [mmc_block]) from
> [<c036ae30>] (kthread+0x120/0x138)
> [ 6.530049] [<c036ae30>] (kthread) from [<c0307e58>]
> (ret_from_fork+0x14/0x3c)
> [ 6.530055] ---[ end trace 221a5a14ca55fa22 ]---
> [ 6.545765] mmcblk0: p1 p2 p3 p4
> [ 6.566015] random: fast init done
> [ 6.623699] mmc1: new high speed SDIO card at address 0001
Looks more like a cma allocator issue on a quick glance.
cheers,
Gerd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
@ 2017-03-15 8:21 ` Gerd Hoffmann
0 siblings, 0 replies; 40+ messages in thread
From: Gerd Hoffmann @ 2017-03-15 8:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
> First the flipping of the mmc host driver for the SD card slot will
> cause issues for users that build it as a module. When I tested this
> on Fedora the first update I ended up with a system that didn't boot.
Yep, switching drivers is a pain point here indeed.
Possibly we could fix that by adding a MODULE_SOFTDEP() to the iproc
driver? Comments? Better ideas?
> Also i often see the device hang for a long period when systemd probes
> for rfkill status, sometimes it needs to be reset but it generally
> gets there.
What device is that? rpi3 with wifi?
> [ 6.529079] Hardware name: Generic DT based system
> [ 6.529106] [<c0311708>] (unwind_backtrace) from [<c030c438>]
> (show_stack+0x18/0x1c)
> [ 6.529122] [<c030c438>] (show_stack) from [<c0639b44>]
> (dump_stack+0x80/0xa0)
> [ 6.529137] [<c0639b44>] (dump_stack) from [<c034ca3c>] (__warn+0xe4/0x104)
> [ 6.529150] [<c034ca3c>] (__warn) from [<c034ca98>]
> (warn_slowpath_fmt+0x3c/0x4c)
> [ 6.529166] [<c034ca98>] (warn_slowpath_fmt) from [<c0363b2c>]
> (check_flush_dependency+0xac/0x134)
> [ 6.529184] [<c0363b2c>] (check_flush_dependency) from [<c036433c>]
> (flush_work+0xa0/0x178)
> [ 6.529201] [<c036433c>] (flush_work) from [<c0458084>]
> (drain_all_pages+0x1a8/0x1cc)
> [ 6.529221] [<c0458084>] (drain_all_pages) from [<c04b1d90>]
> (start_isolate_page_range+0x168/0x1b4)
> [ 6.529239] [<c04b1d90>] (start_isolate_page_range) from
> [<c045b854>] (alloc_contig_range+0xd4/0x314)
> [ 6.529258] [<c045b854>] (alloc_contig_range) from [<c04b6660>]
> (cma_alloc+0x188/0x300)
> [ 6.529275] [<c04b6660>] (cma_alloc) from [<c03161e8>]
> (__alloc_from_contiguous+0x40/0xd8)
> [ 6.529290] [<c03161e8>] (__alloc_from_contiguous) from
> [<c03162bc>] (cma_allocator_alloc+0x3c/0x44)
> [ 6.529303] [<c03162bc>] (cma_allocator_alloc) from [<c0316504>]
> (__dma_alloc+0x1d4/0x2f0)
> [ 6.529317] [<c0316504>] (__dma_alloc) from [<c0316698>]
> (arm_dma_alloc+0x3c/0x48)
> [ 6.529331] [<c0316698>] (arm_dma_alloc) from [<c049d120>]
> (dma_pool_alloc+0x124/0x240)
> [ 6.529356] [<c049d120>] (dma_pool_alloc) from [<bf009568>]
> (bcm2835_dma_create_cb_chain+0xb0/0x1dc [bcm2835_dma])
> [ 6.529385] [<bf009568>] (bcm2835_dma_create_cb_chain
> [bcm2835_dma]) from [<bf009ad4>] (bcm2835_dma_prep_slave_sg+0xf0/0x25c
> [bcm2835_dma])
> [ 6.529418] [<bf009ad4>] (bcm2835_dma_prep_slave_sg [bcm2835_dma])
> from [<bf04af04>] (bcm2835_request+0x2a4/0x3f4 [bcm2835])
> [ 6.529548] [<bf04af04>] (bcm2835_request [bcm2835]) from
> [<bf0145d0>] (mmc_start_request+0x1f8/0x264 [mmc_core])
> [ 6.529756] [<bf0145d0>] (mmc_start_request [mmc_core]) from
> [<bf016204>] (mmc_start_areq+0x2c8/0x318 [mmc_core])
> [ 6.529890] [<bf016204>] (mmc_start_areq [mmc_core]) from
> [<bf07fa1c>] (mmc_blk_issue_rw_rq+0xc0/0x308 [mmc_block])
> [ 6.529943] [<bf07fa1c>] (mmc_blk_issue_rw_rq [mmc_block]) from
> [<bf080f84>] (mmc_blk_issue_rq+0x418/0x428 [mmc_block])
> [ 6.529997] [<bf080f84>] (mmc_blk_issue_rq [mmc_block]) from
> [<bf081138>] (mmc_queue_thread+0x148/0x1bc [mmc_block])
> [ 6.530031] [<bf081138>] (mmc_queue_thread [mmc_block]) from
> [<c036ae30>] (kthread+0x120/0x138)
> [ 6.530049] [<c036ae30>] (kthread) from [<c0307e58>]
> (ret_from_fork+0x14/0x3c)
> [ 6.530055] ---[ end trace 221a5a14ca55fa22 ]---
> [ 6.545765] mmcblk0: p1 p2 p3 p4
> [ 6.566015] random: fast init done
> [ 6.623699] mmc1: new high speed SDIO card at address 0001
Looks more like a cma allocator issue on a quick glance.
cheers,
Gerd
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
2017-03-15 8:21 ` Gerd Hoffmann
@ 2017-03-15 10:06 ` Peter Robinson
-1 siblings, 0 replies; 40+ messages in thread
From: Peter Robinson @ 2017-03-15 10:06 UTC (permalink / raw)
To: Gerd Hoffmann
Cc: linux-rpi-kernel, mark.rutland, devicetree, ulf.hansson,
f.fainelli, sbranden, rjui, lee, will.deacon, linux,
linux-kernel, robh+dt, bcm-kernel-feedback-list, catalin.marinas,
linux-mmc, linux-arm-kernel
On Wed, Mar 15, 2017 at 8:21 AM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Hi,
>
>> First the flipping of the mmc host driver for the SD card slot will
>> cause issues for users that build it as a module. When I tested this
>> on Fedora the first update I ended up with a system that didn't boot.
>
> Yep, switching drivers is a pain point here indeed.
>
> Possibly we could fix that by adding a MODULE_SOFTDEP() to the iproc
> driver? Comments? Better ideas?
>
>> Also i often see the device hang for a long period when systemd probes
>> for rfkill status, sometimes it needs to be reset but it generally
>> gets there.
>
> What device is that? rpi3 with wifi?
Yes, RPi3, with the brcmfmac43430-sdio.txt added so the firmware
loads, interface works.
>> [ 6.529079] Hardware name: Generic DT based system
>> [ 6.529106] [<c0311708>] (unwind_backtrace) from [<c030c438>]
>> (show_stack+0x18/0x1c)
>> [ 6.529122] [<c030c438>] (show_stack) from [<c0639b44>]
>> (dump_stack+0x80/0xa0)
>> [ 6.529137] [<c0639b44>] (dump_stack) from [<c034ca3c>] (__warn+0xe4/0x104)
>> [ 6.529150] [<c034ca3c>] (__warn) from [<c034ca98>]
>> (warn_slowpath_fmt+0x3c/0x4c)
>> [ 6.529166] [<c034ca98>] (warn_slowpath_fmt) from [<c0363b2c>]
>> (check_flush_dependency+0xac/0x134)
>> [ 6.529184] [<c0363b2c>] (check_flush_dependency) from [<c036433c>]
>> (flush_work+0xa0/0x178)
>> [ 6.529201] [<c036433c>] (flush_work) from [<c0458084>]
>> (drain_all_pages+0x1a8/0x1cc)
>> [ 6.529221] [<c0458084>] (drain_all_pages) from [<c04b1d90>]
>> (start_isolate_page_range+0x168/0x1b4)
>> [ 6.529239] [<c04b1d90>] (start_isolate_page_range) from
>> [<c045b854>] (alloc_contig_range+0xd4/0x314)
>> [ 6.529258] [<c045b854>] (alloc_contig_range) from [<c04b6660>]
>> (cma_alloc+0x188/0x300)
>> [ 6.529275] [<c04b6660>] (cma_alloc) from [<c03161e8>]
>> (__alloc_from_contiguous+0x40/0xd8)
>> [ 6.529290] [<c03161e8>] (__alloc_from_contiguous) from
>> [<c03162bc>] (cma_allocator_alloc+0x3c/0x44)
>> [ 6.529303] [<c03162bc>] (cma_allocator_alloc) from [<c0316504>]
>> (__dma_alloc+0x1d4/0x2f0)
>> [ 6.529317] [<c0316504>] (__dma_alloc) from [<c0316698>]
>> (arm_dma_alloc+0x3c/0x48)
>> [ 6.529331] [<c0316698>] (arm_dma_alloc) from [<c049d120>]
>> (dma_pool_alloc+0x124/0x240)
>> [ 6.529356] [<c049d120>] (dma_pool_alloc) from [<bf009568>]
>> (bcm2835_dma_create_cb_chain+0xb0/0x1dc [bcm2835_dma])
>> [ 6.529385] [<bf009568>] (bcm2835_dma_create_cb_chain
>> [bcm2835_dma]) from [<bf009ad4>] (bcm2835_dma_prep_slave_sg+0xf0/0x25c
>> [bcm2835_dma])
>> [ 6.529418] [<bf009ad4>] (bcm2835_dma_prep_slave_sg [bcm2835_dma])
>> from [<bf04af04>] (bcm2835_request+0x2a4/0x3f4 [bcm2835])
>> [ 6.529548] [<bf04af04>] (bcm2835_request [bcm2835]) from
>> [<bf0145d0>] (mmc_start_request+0x1f8/0x264 [mmc_core])
>> [ 6.529756] [<bf0145d0>] (mmc_start_request [mmc_core]) from
>> [<bf016204>] (mmc_start_areq+0x2c8/0x318 [mmc_core])
>> [ 6.529890] [<bf016204>] (mmc_start_areq [mmc_core]) from
>> [<bf07fa1c>] (mmc_blk_issue_rw_rq+0xc0/0x308 [mmc_block])
>> [ 6.529943] [<bf07fa1c>] (mmc_blk_issue_rw_rq [mmc_block]) from
>> [<bf080f84>] (mmc_blk_issue_rq+0x418/0x428 [mmc_block])
>> [ 6.529997] [<bf080f84>] (mmc_blk_issue_rq [mmc_block]) from
>> [<bf081138>] (mmc_queue_thread+0x148/0x1bc [mmc_block])
>> [ 6.530031] [<bf081138>] (mmc_queue_thread [mmc_block]) from
>> [<c036ae30>] (kthread+0x120/0x138)
>> [ 6.530049] [<c036ae30>] (kthread) from [<c0307e58>]
>> (ret_from_fork+0x14/0x3c)
>> [ 6.530055] ---[ end trace 221a5a14ca55fa22 ]---
>> [ 6.545765] mmcblk0: p1 p2 p3 p4
>> [ 6.566015] random: fast init done
>> [ 6.623699] mmc1: new high speed SDIO card at address 0001
>
> Looks more like a cma allocator issue on a quick glance.
Possibly, but only started once I added the dma drive into the initrd
and happens right when the MMC driver loads, we're not even past
switch root which is long before loading the vc4 driver which is the
main cma consumer.
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller
@ 2017-03-15 10:06 ` Peter Robinson
0 siblings, 0 replies; 40+ messages in thread
From: Peter Robinson @ 2017-03-15 10:06 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 15, 2017 at 8:21 AM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Hi,
>
>> First the flipping of the mmc host driver for the SD card slot will
>> cause issues for users that build it as a module. When I tested this
>> on Fedora the first update I ended up with a system that didn't boot.
>
> Yep, switching drivers is a pain point here indeed.
>
> Possibly we could fix that by adding a MODULE_SOFTDEP() to the iproc
> driver? Comments? Better ideas?
>
>> Also i often see the device hang for a long period when systemd probes
>> for rfkill status, sometimes it needs to be reset but it generally
>> gets there.
>
> What device is that? rpi3 with wifi?
Yes, RPi3, with the brcmfmac43430-sdio.txt added so the firmware
loads, interface works.
>> [ 6.529079] Hardware name: Generic DT based system
>> [ 6.529106] [<c0311708>] (unwind_backtrace) from [<c030c438>]
>> (show_stack+0x18/0x1c)
>> [ 6.529122] [<c030c438>] (show_stack) from [<c0639b44>]
>> (dump_stack+0x80/0xa0)
>> [ 6.529137] [<c0639b44>] (dump_stack) from [<c034ca3c>] (__warn+0xe4/0x104)
>> [ 6.529150] [<c034ca3c>] (__warn) from [<c034ca98>]
>> (warn_slowpath_fmt+0x3c/0x4c)
>> [ 6.529166] [<c034ca98>] (warn_slowpath_fmt) from [<c0363b2c>]
>> (check_flush_dependency+0xac/0x134)
>> [ 6.529184] [<c0363b2c>] (check_flush_dependency) from [<c036433c>]
>> (flush_work+0xa0/0x178)
>> [ 6.529201] [<c036433c>] (flush_work) from [<c0458084>]
>> (drain_all_pages+0x1a8/0x1cc)
>> [ 6.529221] [<c0458084>] (drain_all_pages) from [<c04b1d90>]
>> (start_isolate_page_range+0x168/0x1b4)
>> [ 6.529239] [<c04b1d90>] (start_isolate_page_range) from
>> [<c045b854>] (alloc_contig_range+0xd4/0x314)
>> [ 6.529258] [<c045b854>] (alloc_contig_range) from [<c04b6660>]
>> (cma_alloc+0x188/0x300)
>> [ 6.529275] [<c04b6660>] (cma_alloc) from [<c03161e8>]
>> (__alloc_from_contiguous+0x40/0xd8)
>> [ 6.529290] [<c03161e8>] (__alloc_from_contiguous) from
>> [<c03162bc>] (cma_allocator_alloc+0x3c/0x44)
>> [ 6.529303] [<c03162bc>] (cma_allocator_alloc) from [<c0316504>]
>> (__dma_alloc+0x1d4/0x2f0)
>> [ 6.529317] [<c0316504>] (__dma_alloc) from [<c0316698>]
>> (arm_dma_alloc+0x3c/0x48)
>> [ 6.529331] [<c0316698>] (arm_dma_alloc) from [<c049d120>]
>> (dma_pool_alloc+0x124/0x240)
>> [ 6.529356] [<c049d120>] (dma_pool_alloc) from [<bf009568>]
>> (bcm2835_dma_create_cb_chain+0xb0/0x1dc [bcm2835_dma])
>> [ 6.529385] [<bf009568>] (bcm2835_dma_create_cb_chain
>> [bcm2835_dma]) from [<bf009ad4>] (bcm2835_dma_prep_slave_sg+0xf0/0x25c
>> [bcm2835_dma])
>> [ 6.529418] [<bf009ad4>] (bcm2835_dma_prep_slave_sg [bcm2835_dma])
>> from [<bf04af04>] (bcm2835_request+0x2a4/0x3f4 [bcm2835])
>> [ 6.529548] [<bf04af04>] (bcm2835_request [bcm2835]) from
>> [<bf0145d0>] (mmc_start_request+0x1f8/0x264 [mmc_core])
>> [ 6.529756] [<bf0145d0>] (mmc_start_request [mmc_core]) from
>> [<bf016204>] (mmc_start_areq+0x2c8/0x318 [mmc_core])
>> [ 6.529890] [<bf016204>] (mmc_start_areq [mmc_core]) from
>> [<bf07fa1c>] (mmc_blk_issue_rw_rq+0xc0/0x308 [mmc_block])
>> [ 6.529943] [<bf07fa1c>] (mmc_blk_issue_rw_rq [mmc_block]) from
>> [<bf080f84>] (mmc_blk_issue_rq+0x418/0x428 [mmc_block])
>> [ 6.529997] [<bf080f84>] (mmc_blk_issue_rq [mmc_block]) from
>> [<bf081138>] (mmc_queue_thread+0x148/0x1bc [mmc_block])
>> [ 6.530031] [<bf081138>] (mmc_queue_thread [mmc_block]) from
>> [<c036ae30>] (kthread+0x120/0x138)
>> [ 6.530049] [<c036ae30>] (kthread) from [<c0307e58>]
>> (ret_from_fork+0x14/0x3c)
>> [ 6.530055] ---[ end trace 221a5a14ca55fa22 ]---
>> [ 6.545765] mmcblk0: p1 p2 p3 p4
>> [ 6.566015] random: fast init done
>> [ 6.623699] mmc1: new high speed SDIO card at address 0001
>
> Looks more like a cma allocator issue on a quick glance.
Possibly, but only started once I added the dma drive into the initrd
and happens right when the MMC driver loads, we're not even past
switch root which is long before loading the vc4 driver which is the
main cma consumer.
^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2017-03-15 10:06 UTC | newest]
Thread overview: 40+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-21 9:06 [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller Gerd Hoffmann
2017-02-21 9:06 ` Gerd Hoffmann
2017-02-21 9:07 ` [PATCH v3 1/7] dt-bindings: Add binding for brcm,bcm2835-sdhost Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-02-21 9:07 ` [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-03-01 18:00 ` Eric Anholt
2017-03-01 18:00 ` Eric Anholt
2017-03-01 18:00 ` Eric Anholt
2017-03-01 19:21 ` Stefan Wahren
2017-03-01 19:21 ` Stefan Wahren
2017-03-01 19:21 ` Stefan Wahren
2017-03-01 19:31 ` Eric Anholt
2017-03-01 19:31 ` Eric Anholt
2017-03-01 19:41 ` Stefan Wahren
2017-03-01 19:41 ` Stefan Wahren
2017-03-01 19:41 ` Stefan Wahren
2017-02-21 9:07 ` [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-02-21 15:57 ` Stefan Wahren
2017-02-21 15:57 ` Stefan Wahren
2017-02-21 15:57 ` Stefan Wahren
2017-02-21 9:07 ` [PATCH v3 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-02-21 9:07 ` [PATCH v3 5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-02-21 9:07 ` [PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-02-21 9:07 ` [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost Gerd Hoffmann
2017-02-21 9:07 ` Gerd Hoffmann
2017-02-21 9:25 ` Baruch Siach
2017-02-21 9:25 ` Baruch Siach
2017-03-14 14:22 ` [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller Peter Robinson
2017-03-14 14:22 ` Peter Robinson
2017-03-15 8:21 ` Gerd Hoffmann
2017-03-15 8:21 ` Gerd Hoffmann
2017-03-15 8:21 ` Gerd Hoffmann
2017-03-15 10:06 ` Peter Robinson
2017-03-15 10:06 ` Peter Robinson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.