* Kernel panic - not syncing: IO-APIC + timer doesn't work!
@ 2020-07-27 18:39 Scott Branden
2020-07-27 19:46 ` Andy Shevchenko
2020-07-27 20:51 ` Thomas Gleixner
0 siblings, 2 replies; 10+ messages in thread
From: Scott Branden @ 2020-07-27 18:39 UTC (permalink / raw)
To: tglx, bp, x86, mingo; +Cc: linux-kernel
Occasionally I get the following Kernel panic on boot. This is running on the latest kernel but have seen it previously as well.
"Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report."
I don't know who I am support to send a report to. But here is the log with apic=debug
Regards,
Scott
Loading /bzImage... ok
[ 0.000000] Linux version 5.8.0-rc6 (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sat Jul 25 03:55:25 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,g
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d01fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20c000-0x00000000d8983fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8984000-0x00000000d8acdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d8ace000-0x00000000d8c56fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d8c57000-0x00000000d9107fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9108000-0x00000000da55cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da55d000-0x00000000dcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME X570-P, BIOS 1405 11/19/2019
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] Scan for SMP in [mem 0x0009d400-0x0009d7ff]
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D8BF30A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D8BFEBF0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D8BF31F8 00B9F4 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000D90F0E00 000040
[ 0.000000] ACPI: APIC 0x00000000D8BFED08 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D8BFEE68 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D8BFEEB0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D8BFEF50 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.000000] ACPI: WSMT 0x00000000D8C10E08 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D8BFF070 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000D8C07D08 00368A (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x00000000D8C0B398 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000D8C0B3D8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8C0B410 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000D8C0B438 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.000000] ACPI: WPBT 0x00000000D8C0B480 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.000000] ACPI: IVRS 0x00000000D8C0B4C0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: PCCT 0x00000000D8C0B590 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D8C0B600 002F29 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000D8C0E530 000B58 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000D8C0F088 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000D8C0F0B8 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009d01fff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a20c000-0x00000000d8983fff]
[ 0.000000] node 0: [mem 0x00000000da55d000-0x00000000dcffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 23495 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID d, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID d, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID d, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID d, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID d, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID d, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID d, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID d, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID d, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID d, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID d, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID d, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID d, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID d, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID d, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000)
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09d02000-0x09ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd8984000-0xd8acdfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd8ace000-0xd8c56fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd8c57000-0xd9107fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd9108000-0xda55cfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdfffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 52 pages/cpu s172760 r8192 d32040 u262144
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4105617
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hag
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 16288908K/16683236K available (16388K kernel code, 1982K rwdata, 4144K rodata, 1604K init, 1484K bss, 394328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] ftrace: allocating 48968 entries in 192 pages
[ 0.000000] ftrace: allocated 192 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1224, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x361/0x531 with crng_init=0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20200528
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] Switched APIC routing to physical flat.
[ 0.003000] enabled ExtINT on CPU#0
[ 0.006000] ENABLING IO-APIC IRQs
[ 0.007000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.007000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.007000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.007000] ..... (found apic 0 pin 2) ...
[ 0.007000] ....... failed.
[ 0.007000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.007000] ..... failed.
[ 0.007000] ...trying to set up timer as ExtINT IRQ...
[ 0.007000] ..... failed :(.
[ 0.007000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
[ 0.007000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.8.0-rc6 #1
[ 0.007000] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1405 11/19/2019
[ 0.007000] Call Trace:
[ 0.007000] dump_stack+0x78/0xa0
[ 0.007000] panic+0x100/0x2c6
[ 0.007000] setup_IO_APIC+0x826/0x86a
[ 0.007000] ? clear_IO_APIC_pin+0x173/0x240
[ 0.007000] x86_late_time_init+0x20/0x30
[ 0.007000] start_kernel+0x478/0x531
[ 0.007000] secondary_startup_64+0xb6/0xc0
[ 0.007000] ---[ end Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. ]---
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-27 18:39 Kernel panic - not syncing: IO-APIC + timer doesn't work! Scott Branden
@ 2020-07-27 19:46 ` Andy Shevchenko
2020-07-27 20:51 ` Thomas Gleixner
1 sibling, 0 replies; 10+ messages in thread
From: Andy Shevchenko @ 2020-07-27 19:46 UTC (permalink / raw)
To: Scott Branden
Cc: Thomas Gleixner, Borislav Petkov,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),
Ingo Molnar, Linux Kernel Mailing List
On Mon, Jul 27, 2020 at 10:20 PM Scott Branden
<scott.branden@broadcom.com> wrote:
>
> Occasionally I get the following Kernel panic on boot. This is running on the latest kernel but have seen it previously as well.
> "Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report."
>
> I don't know who I am support to send a report to. But here is the log with apic=debug
Just a wild guess, do you have x2APIC in your system enabled and driver for it?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-27 18:39 Kernel panic - not syncing: IO-APIC + timer doesn't work! Scott Branden
2020-07-27 19:46 ` Andy Shevchenko
@ 2020-07-27 20:51 ` Thomas Gleixner
2020-07-27 21:06 ` Scott Branden
2020-07-27 22:48 ` Scott Branden
1 sibling, 2 replies; 10+ messages in thread
From: Thomas Gleixner @ 2020-07-27 20:51 UTC (permalink / raw)
To: Scott Branden, bp, x86, mingo; +Cc: linux-kernel
Scott,
Scott Branden <scott.branden@broadcom.com> writes:
> Occasionally I get the following Kernel panic on boot. This is
> running on the latest kernel but have seen it previously as well.
> "Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with
> apic=debug and send a report."
>
> I don't know who I am support to send a report to. But here is the log with apic=debug
> [ 0.006000] ENABLING IO-APIC IRQs
> [ 0.007000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.007000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> [ 0.007000] ...trying to set up timer (IRQ0) through the 8259A ...
> [ 0.007000] ..... (found apic 0 pin 2) ...
> [ 0.007000] ....... failed.
> [ 0.007000] ...trying to set up timer as Virtual Wire IRQ...
> [ 0.007000] ..... failed.
> [ 0.007000] ...trying to set up timer as ExtINT IRQ...
> [ 0.007000] ..... failed :(.
> [ 0.007000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
Nothing which rings a bell. Can you please provide a boot log from a
successful boot with apic=debug on the command line?
Also you might check whether there are BIOS updates for this board. The
early Ryzen BIOSes had some rough edges.
Thanks,
tglx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-27 20:51 ` Thomas Gleixner
@ 2020-07-27 21:06 ` Scott Branden
2020-07-27 22:48 ` Scott Branden
1 sibling, 0 replies; 10+ messages in thread
From: Scott Branden @ 2020-07-27 21:06 UTC (permalink / raw)
To: Thomas Gleixner, bp, x86, mingo; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1619 bytes --]
Hi Thomas,
On 2020-07-27 1:51 p.m., Thomas Gleixner wrote:
> Scott,
>
> Scott Branden <scott.branden@broadcom.com> writes:
>
>> Occasionally I get the following Kernel panic on boot. This is
>> running on the latest kernel but have seen it previously as well.
>> "Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with
>> apic=debug and send a report."
>>
>> I don't know who I am support to send a report to. But here is the log with apic=debug
>> [ 0.006000] ENABLING IO-APIC IRQs
>> [ 0.007000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.007000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>> [ 0.007000] ...trying to set up timer (IRQ0) through the 8259A ...
>> [ 0.007000] ..... (found apic 0 pin 2) ...
>> [ 0.007000] ....... failed.
>> [ 0.007000] ...trying to set up timer as Virtual Wire IRQ...
>> [ 0.007000] ..... failed.
>> [ 0.007000] ...trying to set up timer as ExtINT IRQ...
>> [ 0.007000] ..... failed :(.
>> [ 0.007000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
> Nothing which rings a bell. Can you please provide a boot log from a
> successful boot with apic=debug on the command line?
boot log attached.
>
> Also you might check whether there are BIOS updates for this board. The
> early Ryzen BIOSes had some rough edges.
Will get someone to check for updates.
It's a remote system so don't have direct access to the EFI Shell right now.
>
> Thanks,
>
> tglx
>
Thanks,
Scott
[-- Attachment #2: apicdebug.txt --]
[-- Type: text/plain, Size: 110154 bytes --]
[ 0.000000] Linux version 5.8.0-rc6 (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sat Jul 25 03:55:25 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrootdebug
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d01fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20c000-0x00000000d8983fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8984000-0x00000000d8acdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d8ace000-0x00000000d8c56fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d8c57000-0x00000000d9107fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9108000-0x00000000da55cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da55d000-0x00000000dcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME X570-P, BIOS 1405 11/19/2019
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 base 0000D9CB0000 mask FFFFFFFF0000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xd9cb0000-0xd9cbffff] usable ==> reserved
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] Scan for SMP in [mem 0x0009d400-0x0009d7ff]
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D8BF30A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D8BFEBF0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D8BF31F8 00B9F4 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000D90F0E00 000040
[ 0.000000] ACPI: APIC 0x00000000D8BFED08 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D8BFEE68 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D8BFEEB0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D8BFEF50 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.000000] ACPI: WSMT 0x00000000D8C10E08 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D8BFF070 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000D8C07D08 00368A (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x00000000D8C0B398 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000D8C0B3D8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8C0B410 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000D8C0B438 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.000000] ACPI: WPBT 0x00000000D8C0B480 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.000000] ACPI: IVRS 0x00000000D8C0B4C0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: PCCT 0x00000000D8C0B590 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D8C0B600 002F29 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000D8C0E530 000B58 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000D8C0F088 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000D8C0F0B8 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009d01fff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a20c000-0x00000000d8983fff]
[ 0.000000] node 0: [mem 0x00000000da55d000-0x00000000dcffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 23495 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[ 0.000000] On node 0 totalpages: 4170809
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13957 pages used for memmap
[ 0.000000] DMA32 zone: 893213 pages, LIFO batch:63
[ 0.000000] Normal zone: 51150 pages used for memmap
[ 0.000000] Normal zone: 3273600 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID d, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID d, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID d, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID d, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID d, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID d, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID d, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID d, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID d, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID d, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID d, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID d, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID d, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID d, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID d, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000)
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09d02000-0x09ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd8984000-0xd8acdfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd8ace000-0xd8c56fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd8c57000-0xd9107fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd9108000-0xda55cfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdfffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 52 pages/cpu s172760 r8192 d32040 u262144
[ 0.000000] pcpu-alloc: s172760 r8192 d32040 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4105617
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrootdebug
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 16288908K/16683236K available (16388K kernel code, 1982K rwdata, 4144K rodata, 1604K init, 1484K bss, 394328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] ftrace: allocating 48968 entries in 192 pages
[ 0.000000] ftrace: allocated 192 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1224, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x361/0x531 with crng_init=0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20200528
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] Switched APIC routing to physical flat.
[ 0.002000] enabled ExtINT on CPU#0
[ 0.004000] ENABLING IO-APIC IRQs
[ 0.005000] init IO_APIC IRQs
[ 0.005000] apic 13 pin 0 not connected
[ 0.005000] IOAPIC[0]: Set routing entry (13-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-5 -> 0xef -> IRQ 5 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-9 -> 0xef -> IRQ 9 Mode:1 Active:1 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-10 -> 0xef -> IRQ 10 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-11 -> 0xef -> IRQ 11 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:0)
[ 0.005000] IOAPIC[0]: Set routing entry (13-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:0)
[ 0.005000] apic 13 pin 16 not connected
[ 0.005000] apic 13 pin 17 not connected
[ 0.005000] apic 13 pin 18 not connected
[ 0.005000] apic 13 pin 19 not connected
[ 0.005000] apic 13 pin 20 not connected
[ 0.005000] apic 13 pin 21 not connected
[ 0.005000] apic 13 pin 22 not connected
[ 0.005000] apic 13 pin 23 not connected
[ 0.005000] apic 14 pin 0 not connected
[ 0.005000] apic 14 pin 1 not connected
[ 0.005000] apic 14 pin 2 not connected
[ 0.005000] apic 14 pin 3 not connected
[ 0.005000] apic 14 pin 4 not connected
[ 0.005000] apic 14 pin 5 not connected
[ 0.005000] apic 14 pin 6 not connected
[ 0.005000] apic 14 pin 7 not connected
[ 0.005000] apic 14 pin 8 not connected
[ 0.005000] apic 14 pin 9 not connected
[ 0.005000] apic 14 pin 10 not connected
[ 0.005000] apic 14 pin 11 not connected
[ 0.005000] apic 14 pin 12 not connected
[ 0.005000] apic 14 pin 13 not connected
[ 0.005000] apic 14 pin 14 not connected
[ 0.005000] apic 14 pin 15 not connected
[ 0.005000] apic 14 pin 16 not connected
[ 0.005000] apic 14 pin 17 not connected
[ 0.005000] apic 14 pin 18 not connected
[ 0.005000] apic 14 pin 19 not connected
[ 0.005000] apic 14 pin 20 not connected
[ 0.005000] apic 14 pin 21 not connected
[ 0.005000] apic 14 pin 22 not connected
[ 0.005000] apic 14 pin 23 not connected
[ 0.005000] apic 14 pin 24 not connected
[ 0.005000] apic 14 pin 25 not connected
[ 0.005000] apic 14 pin 26 not connected
[ 0.005000] apic 14 pin 27 not connected
[ 0.005000] apic 14 pin 28 not connected
[ 0.005000] apic 14 pin 29 not connected
[ 0.005000] apic 14 pin 30 not connected
[ 0.005000] apic 14 pin 31 not connected
[ 0.005000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.011000] tsc: PIT calibration matches HPET. 1 loops
[ 0.012000] tsc: Detected 3793.004 MHz processor
[ 0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d590ddb140, max_idle_ns: 881590404252 ns
[ 0.010765] Calibrating delay loop (skipped), value calculated using timer frequency.. 7586.00 BogoMIPS (lpj=3793004)
[ 0.011764] pid_max: default: 32768 minimum: 301
[ 0.012775] LSM: Security Framework initializing
[ 0.013768] SELinux: Initializing.
[ 0.014797] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.015788] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.016871] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.017815] LVT offset 1 assigned for vector 0xf9
[ 0.018896] LVT offset 2 assigned for vector 0xf4
[ 0.019799] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.020764] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.021765] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.022765] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.023764] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.024765] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.025764] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.026765] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.027947] Freeing SMP alternatives memory: 44K
[ 0.029790] Using local APIC timer interrupts.
[ 0.029790] calibrating APIC timer ...
[ 0.133462] ... lapic delta = 623849
[ 0.133763] ... PM-Timer delta = 357967
[ 0.133763] ... PM-Timer result ok
[ 0.133763] ..... delta 623849
[ 0.133763] ..... mult: 26792005
[ 0.133763] ..... calibration result: 99815
[ 0.133763] ..... CPU clock speed is 3793.0005 MHz.
[ 0.133763] ..... host bus clock speed is 99.0815 MHz.
[ 0.133770] smpboot: CPU0: AMD Ryzen 5 3600X 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
[ 0.134808] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.135764] ... version: 0
[ 0.136764] ... bit width: 48
[ 0.137764] ... generic registers: 6
[ 0.138764] ... value mask: 0000ffffffffffff
[ 0.139764] ... max period: 00007fffffffffff
[ 0.140764] ... fixed-purpose events: 0
[ 0.141764] ... event mask: 000000000000003f
[ 0.143769] rcu: Hierarchical SRCU implementation.
[ 0.146065] smp: Bringing up secondary CPUs ...
[ 0.146800] x86: Booting SMP configuration:
[ 0.147764] .... node #0, CPUs: #1
[ 0.000000] masked ExtINT on CPU#1
[ 0.156807] #2
[ 0.000000] masked ExtINT on CPU#2
[ 0.162801] #3
[ 0.000000] masked ExtINT on CPU#3
[ 0.169802] #4
[ 0.000000] masked ExtINT on CPU#4
[ 0.175805] #5
[ 0.000000] masked ExtINT on CPU#5
[ 0.181801] #6
[ 0.000000] masked ExtINT on CPU#6
[ 0.188837] #7
[ 0.000000] masked ExtINT on CPU#7
[ 0.194801] #8
[ 0.000000] masked ExtINT on CPU#8
[ 0.201800] #9
[ 0.000000] masked ExtINT on CPU#9
[ 0.207803] #10
[ 0.000000] masked ExtINT on CPU#10
[ 0.214803] #11
[ 0.000000] masked ExtINT on CPU#11
[ 0.220780] smp: Brought up 1 node, 12 CPUs
[ 0.221765] smpboot: Max logical packages: 3
[ 0.222764] smpboot: Total of 12 processors activated (91032.09 BogoMIPS)
[ 0.225800] devtmpfs: initialized
[ 0.228867] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
[ 0.236767] PM: Registering ACPI NVS region [mem 0xd8c57000-0xd9107fff] (4919296 bytes)
[ 0.244855] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.254768] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.261944] PM: RTC time: 04:25:57, date: 2020-07-28
[ 0.266765] thermal_sys: Registered thermal governor 'step_wise'
[ 0.266766] thermal_sys: Registered thermal governor 'user_space'
[ 0.272826] NET: Registered protocol family 16
[ 0.282806] audit: initializing netlink subsys (disabled)
[ 0.288772] audit: type=2000 audit(1595910355.292:1): state=initialized audit_enabled=0 res=1
[ 0.296766] cpuidle: using governor menu
[ 0.300773] Detected 1 PCC Subspaces
[ 0.304773] Registering PCC driver as Mailbox controller
[ 0.309808] ACPI: bus type PCI registered
[ 0.313813] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.323766] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.330770] PCI: Using configuration type 1 for base access
[ 0.337295] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.343777] cryptomgr_test (79) used greatest stack depth: 15712 bytes left
[ 0.350782] cryptomgr_test (84) used greatest stack depth: 15240 bytes left
[ 0.357837] cryptomgr_test (96) used greatest stack depth: 15192 bytes left
[ 0.364804] ACPI: Added _OSI(Module Device)
[ 0.368765] ACPI: Added _OSI(Processor Device)
[ 0.373765] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.377766] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.383765] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.387765] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.393764] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.403499] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.410546] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.417996] ACPI: Interpreter enabled
[ 0.421774] ACPI: (supports S0 S3 S4 S5)
[ 0.425765] ACPI: Using IOAPIC for interrupt routing
[ 0.430961] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.439917] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.449548] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.454767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.464850] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME LTR]
[ 0.471840] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[ 0.477770] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.488835] PCI host bridge to bus 0000:00
[ 0.492765] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.499765] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.506764] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.513764] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.519765] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.527764] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.534764] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.542765] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.547766] pci_bus 0000:00: scanning bus
[ 0.547771] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.553844] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[ 0.559853] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.565824] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[ 0.572777] pci 0000:00:01.2: enabling Extended Tags
[ 0.577782] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.583766] pci 0000:00:01.2: PME# disabled
[ 0.583840] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.589827] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.595823] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[ 0.601849] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.607766] pci 0000:00:03.1: PME# disabled
[ 0.607850] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.613827] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.619828] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.625821] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.631793] pci 0000:00:07.1: enabling Extended Tags
[ 0.636801] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.642765] pci 0000:00:07.1: PME# disabled
[ 0.642834] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.649801] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.655795] pci 0000:00:08.1: enabling Extended Tags
[ 0.660804] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.666766] pci 0000:00:08.1: PME# disabled
[ 0.666832] pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
[ 0.672797] pci 0000:00:08.2: enabling Extended Tags
[ 0.677804] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.683767] pci 0000:00:08.2: PME# disabled
[ 0.683839] pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
[ 0.689795] pci 0000:00:08.3: enabling Extended Tags
[ 0.694804] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.700766] pci 0000:00:08.3: PME# disabled
[ 0.700848] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.706870] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.712875] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.718800] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.724799] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.730799] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.737780] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.743799] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.749799] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.755800] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.761808] pci_bus 0000:00: fixups for bus
[ 0.761809] pci 0000:00:01.2: scanning [bus 01-07] behind bridge, pass 0
[ 0.761831] pci_bus 0000:01: scanning bus
[ 0.761844] pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
[ 0.767833] pci 0000:01:00.0: enabling Extended Tags
[ 0.772845] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.778792] pci 0000:01:00.0: PME# disabled
[ 0.778842] pci 0000:01:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
[ 0.793828] pci_bus 0000:01: fixups for bus
[ 0.793829] pci 0000:00:01.2: PCI bridge to [bus 01-07]
[ 0.799767] pci 0000:00:01.2: bridge window [io 0xe000-0xffff]
[ 0.805766] pci 0000:00:01.2: bridge window [mem 0xf6000000-0xf76fffff]
[ 0.811767] pci 0000:00:01.2: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 0.819766] pci 0000:01:00.0: scanning [bus 02-07] behind bridge, pass 0
[ 0.819795] pci_bus 0000:02: scanning bus
[ 0.819880] pci 0000:02:04.0: [1022:57a3] type 01 class 0x060400
[ 0.825859] pci 0000:02:04.0: enabling Extended Tags
[ 0.831820] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.837767] pci 0000:02:04.0: PME# disabled
[ 0.837943] pci 0000:02:05.0: [1022:57a3] type 01 class 0x060400
[ 0.843859] pci 0000:02:05.0: enabling Extended Tags
[ 0.848940] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
[ 0.854767] pci 0000:02:05.0: PME# disabled
[ 0.854966] pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
[ 0.860868] pci 0000:02:08.0: enabling Extended Tags
[ 0.866863] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.872767] pci 0000:02:08.0: PME# disabled
[ 0.872914] pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
[ 0.878856] pci 0000:02:09.0: enabling Extended Tags
[ 0.883919] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
[ 0.889767] pci 0000:02:09.0: PME# disabled
[ 0.889911] pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
[ 0.895856] pci 0000:02:0a.0: enabling Extended Tags
[ 0.900919] pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
[ 0.907767] pci 0000:02:0a.0: PME# disabled
[ 0.907936] pci_bus 0000:02: fixups for bus
[ 0.907936] pci 0000:01:00.0: PCI bridge to [bus 02-07]
[ 0.912770] pci 0000:01:00.0: bridge window [io 0xe000-0xffff]
[ 0.918767] pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf76fffff]
[ 0.925770] pci 0000:01:00.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 0.933766] pci 0000:02:04.0: scanning [bus 03-03] behind bridge, pass 0
[ 0.933835] pci_bus 0000:03: scanning bus
[ 0.933853] pci 0000:03:00.0: [10de:128b] type 00 class 0x030000
[ 0.939799] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.945783] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.952783] pci 0000:03:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
[ 0.959777] pci 0000:03:00.0: reg 0x24: [io 0xf000-0xf07f]
[ 0.965776] pci 0000:03:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.972774] pci 0000:03:00.0: enabling Extended Tags
[ 0.977902] pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:02:04.0 (capable of 32.000 Gb/s with 5.0 GT/s PCIe x8 link)
[ 0.992809] pci 0000:03:00.1: [10de:0e0f] type 00 class 0x040300
[ 0.998793] pci 0000:03:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 1.004845] pci 0000:03:00.1: enabling Extended Tags
[ 1.009911] pci_bus 0000:03: fixups for bus
[ 1.009912] pci 0000:02:04.0: PCI bridge to [bus 03]
[ 1.014770] pci 0000:02:04.0: bridge window [io 0xf000-0xffff]
[ 1.020767] pci 0000:02:04.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.027770] pci 0000:02:04.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 1.035765] pci_bus 0000:03: bus scan returning with max=03
[ 1.035768] pci 0000:02:05.0: scanning [bus 04-04] behind bridge, pass 0
[ 1.035838] pci_bus 0000:04: scanning bus
[ 1.035858] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 1.041805] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 1.047800] pci 0000:04:00.0: reg 0x18: [mem 0xf7604000-0xf7604fff 64bit]
[ 1.053786] pci 0000:04:00.0: reg 0x20: [mem 0xf7600000-0xf7603fff 64bit]
[ 1.060902] pci 0000:04:00.0: supports D1 D2
[ 1.065764] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.071769] pci 0000:04:00.0: PME# disabled
[ 1.071956] pci_bus 0000:04: fixups for bus
[ 1.071956] pci 0000:02:05.0: PCI bridge to [bus 04]
[ 1.076770] pci 0000:02:05.0: bridge window [io 0xe000-0xefff]
[ 1.083767] pci 0000:02:05.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 1.089770] pci_bus 0000:04: bus scan returning with max=04
[ 1.089773] pci 0000:02:08.0: scanning [bus 05-05] behind bridge, pass 0
[ 1.089841] pci_bus 0000:05: scanning bus
[ 1.089857] pci 0000:05:00.0: [1022:1485] type 00 class 0x130000
[ 1.095865] pci 0000:05:00.0: enabling Extended Tags
[ 1.101860] pci 0000:05:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 1.116893] pci 0000:05:00.1: [1022:149c] type 00 class 0x0c0330
[ 1.123130] pci 0000:05:00.1: reg 0x10: [mem 0xf7300000-0xf73fffff 64bit]
[ 1.131249] pci 0000:05:00.1: enabling Extended Tags
[ 1.136278] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 1.142803] pci 0000:05:00.1: PME# disabled
[ 1.143040] pci 0000:05:00.3: [1022:149c] type 00 class 0x0c0330
[ 1.148797] pci 0000:05:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
[ 1.155824] pci 0000:05:00.3: enabling Extended Tags
[ 1.160838] pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
[ 1.166768] pci 0000:05:00.3: PME# disabled
[ 1.166924] pci_bus 0000:05: fixups for bus
[ 1.166924] pci 0000:02:08.0: PCI bridge to [bus 05]
[ 1.171772] pci 0000:02:08.0: bridge window [mem 0xf7200000-0xf73fffff]
[ 1.178770] pci_bus 0000:05: bus scan returning with max=05
[ 1.178773] pci 0000:02:09.0: scanning [bus 06-06] behind bridge, pass 0
[ 1.178841] pci_bus 0000:06: scanning bus
[ 1.178857] pci 0000:06:00.0: [1022:7901] type 00 class 0x010601
[ 1.184848] pci 0000:06:00.0: reg 0x24: [mem 0xf7500000-0xf75007ff]
[ 1.190783] pci 0000:06:00.0: enabling Extended Tags
[ 1.195856] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 1.201768] pci 0000:06:00.0: PME# disabled
[ 1.201833] pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 1.217835] pci_bus 0000:06: fixups for bus
[ 1.217835] pci 0000:02:09.0: PCI bridge to [bus 06]
[ 1.222772] pci 0000:02:09.0: bridge window [mem 0xf7500000-0xf75fffff]
[ 1.228770] pci_bus 0000:06: bus scan returning with max=06
[ 1.228773] pci 0000:02:0a.0: scanning [bus 07-07] behind bridge, pass 0
[ 1.228841] pci_bus 0000:07: scanning bus
[ 1.228857] pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
[ 1.235806] pci 0000:07:00.0: reg 0x24: [mem 0xf7400000-0xf74007ff]
[ 1.241783] pci 0000:07:00.0: enabling Extended Tags
[ 1.246857] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 1.252767] pci 0000:07:00.0: PME# disabled
[ 1.252832] pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 1.267835] pci_bus 0000:07: fixups for bus
[ 1.267835] pci 0000:02:0a.0: PCI bridge to [bus 07]
[ 1.272772] pci 0000:02:0a.0: bridge window [mem 0xf7400000-0xf74fffff]
[ 1.279770] pci_bus 0000:07: bus scan returning with max=07
[ 1.279773] pci 0000:02:04.0: scanning [bus 03-03] behind bridge, pass 1
[ 1.279779] pci 0000:02:05.0: scanning [bus 04-04] behind bridge, pass 1
[ 1.279785] pci 0000:02:08.0: scanning [bus 05-05] behind bridge, pass 1
[ 1.279791] pci 0000:02:09.0: scanning [bus 06-06] behind bridge, pass 1
[ 1.279796] pci 0000:02:0a.0: scanning [bus 07-07] behind bridge, pass 1
[ 1.279801] pci_bus 0000:02: bus scan returning with max=07
[ 1.279804] pci 0000:01:00.0: scanning [bus 02-07] behind bridge, pass 1
[ 1.279809] pci_bus 0000:01: bus scan returning with max=07
[ 1.279810] pci 0000:00:03.1: scanning [bus 08-08] behind bridge, pass 0
[ 1.279834] pci_bus 0000:08: scanning bus
[ 1.279848] pci 0000:08:00.0: [14e4:5e87] type 00 class 0x120000
[ 1.285795] pci 0000:08:00.0: reg 0x10: [mem 0xf0800000-0xf0807fff 64bit pref]
[ 1.292776] pci 0000:08:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 1.300776] pci 0000:08:00.0: reg 0x20: [mem 0xec000000-0xefffffff 64bit pref]
[ 1.307856] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 1.313766] pci 0000:08:00.0: PME# disabled
[ 1.313865] pci_bus 0000:08: fixups for bus
[ 1.313865] pci 0000:00:03.1: PCI bridge to [bus 08]
[ 1.318771] pci 0000:00:03.1: bridge window [mem 0xec000000-0xf08fffff 64bit pref]
[ 1.326764] pci_bus 0000:08: bus scan returning with max=08
[ 1.326766] pci 0000:00:07.1: scanning [bus 09-09] behind bridge, pass 0
[ 1.326785] pci_bus 0000:09: scanning bus
[ 1.326792] pci 0000:09:00.0: [1022:148a] type 00 class 0x130000
[ 1.332806] pci 0000:09:00.0: enabling Extended Tags
[ 1.337862] pci_bus 0000:09: fixups for bus
[ 1.337863] pci 0000:00:07.1: PCI bridge to [bus 09]
[ 1.342770] pci_bus 0000:09: bus scan returning with max=09
[ 1.342771] pci 0000:00:08.1: scanning [bus 0a-0a] behind bridge, pass 0
[ 1.342791] pci_bus 0000:0a: scanning bus
[ 1.342799] pci 0000:0a:00.0: [1022:1485] type 00 class 0x130000
[ 1.348815] pci 0000:0a:00.0: enabling Extended Tags
[ 1.353856] pci 0000:0a:00.1: [1022:1486] type 00 class 0x108000
[ 1.359790] pci 0000:0a:00.1: reg 0x18: [mem 0xf7900000-0xf79fffff]
[ 1.365779] pci 0000:0a:00.1: reg 0x24: [mem 0xf7a08000-0xf7a09fff]
[ 1.372773] pci 0000:0a:00.1: enabling Extended Tags
[ 1.377846] pci 0000:0a:00.3: [1022:149c] type 00 class 0x0c0330
[ 1.383783] pci 0000:0a:00.3: reg 0x10: [mem 0xf7800000-0xf78fffff 64bit]
[ 1.389794] pci 0000:0a:00.3: enabling Extended Tags
[ 1.394809] pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
[ 1.401766] pci 0000:0a:00.3: PME# disabled
[ 1.401815] pci 0000:0a:00.4: [1022:1487] type 00 class 0x040300
[ 1.407780] pci 0000:0a:00.4: reg 0x10: [mem 0xf7a00000-0xf7a07fff]
[ 1.413798] pci 0000:0a:00.4: enabling Extended Tags
[ 1.418805] pci 0000:0a:00.4: PME# supported from D0 D3hot D3cold
[ 1.424766] pci 0000:0a:00.4: PME# disabled
[ 1.424843] pci_bus 0000:0a: fixups for bus
[ 1.424844] pci 0000:00:08.1: PCI bridge to [bus 0a]
[ 1.429768] pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 1.436767] pci_bus 0000:0a: bus scan returning with max=0a
[ 1.436769] pci 0000:00:08.2: scanning [bus 0b-0b] behind bridge, pass 0
[ 1.436789] pci_bus 0000:0b: scanning bus
[ 1.436797] pci 0000:0b:00.0: [1022:7901] type 00 class 0x010601
[ 1.442807] pci 0000:0b:00.0: reg 0x24: [mem 0xf7c00000-0xf7c007ff]
[ 1.448773] pci 0000:0b:00.0: enabling Extended Tags
[ 1.453818] pci 0000:0b:00.0: PME# supported from D3hot D3cold
[ 1.459766] pci 0000:0b:00.0: PME# disabled
[ 1.459842] pci_bus 0000:0b: fixups for bus
[ 1.459843] pci 0000:00:08.2: PCI bridge to [bus 0b]
[ 1.464768] pci 0000:00:08.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.471767] pci_bus 0000:0b: bus scan returning with max=0b
[ 1.471768] pci 0000:00:08.3: scanning [bus 0c-0c] behind bridge, pass 0
[ 1.471789] pci_bus 0000:0c: scanning bus
[ 1.471797] pci 0000:0c:00.0: [1022:7901] type 00 class 0x010601
[ 1.477807] pci 0000:0c:00.0: reg 0x24: [mem 0xf7b00000-0xf7b007ff]
[ 1.483773] pci 0000:0c:00.0: enabling Extended Tags
[ 1.488817] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[ 1.494766] pci 0000:0c:00.0: PME# disabled
[ 1.494842] pci_bus 0000:0c: fixups for bus
[ 1.494842] pci 0000:00:08.3: PCI bridge to [bus 0c]
[ 1.499768] pci 0000:00:08.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 1.506767] pci_bus 0000:0c: bus scan returning with max=0c
[ 1.506769] pci 0000:00:01.2: scanning [bus 01-07] behind bridge, pass 1
[ 1.506773] pci 0000:00:03.1: scanning [bus 08-08] behind bridge, pass 1
[ 1.506778] pci 0000:00:07.1: scanning [bus 09-09] behind bridge, pass 1
[ 1.506783] pci 0000:00:08.1: scanning [bus 0a-0a] behind bridge, pass 1
[ 1.506787] pci 0000:00:08.2: scanning [bus 0b-0b] behind bridge, pass 1
[ 1.506792] pci 0000:00:08.3: scanning [bus 0c-0c] behind bridge, pass 1
[ 1.506796] pci_bus 0000:00: bus scan returning with max=0c
[ 1.506993] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 1.513791] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 1.519787] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 1.526793] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 1.533789] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 1.539785] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 1.546785] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 1.553785] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 1.560010] iommu: Default domain type: Translated
[ 1.564775] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 1.565763] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.579766] pci 0000:03:00.0: vgaarb: bridge control possible
[ 1.585764] vgaarb: loaded
[ 1.587796] SCSI subsystem initialized
[ 1.591778] libata version 3.00 loaded.
[ 1.591780] ACPI: bus type USB registered
[ 1.595772] usbcore: registered new interface driver usbfs
[ 1.601768] usbcore: registered new interface driver hub
[ 1.606791] usbcore: registered new device driver usb
[ 1.611769] mc: Linux media interface: v0.10
[ 1.615766] videodev: Linux video capture interface: v2.00
[ 1.621766] pps_core: LinuxPPS API ver. 1 registered
[ 1.626764] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.635765] PTP clock support registered
[ 1.639802] Advanced Linux Sound Architecture Driver Initialized.
[ 1.645832] NetLabel: Initializing
[ 1.648764] NetLabel: domain hash size = 128
[ 1.653764] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.658771] NetLabel: unlabeled traffic allowed by default
[ 1.664769] PCI: Using ACPI for IRQ routing
[ 1.671176] PCI: pci_cache_line_size set to 64 bytes
[ 1.671186] pci 0000:03:00.0: BAR 0: reserving [mem 0xf6000000-0xf6ffffff flags 0x40200] (d=0, p=0)
[ 1.671187] pci 0000:03:00.0: BAR 1: reserving [mem 0xe0000000-0xe7ffffff flags 0x14220c] (d=0, p=0)
[ 1.671187] pci 0000:03:00.0: BAR 3: reserving [mem 0xe8000000-0xe9ffffff flags 0x14220c] (d=0, p=0)
[ 1.671188] pci 0000:03:00.0: BAR 5: reserving [io 0xf000-0xf07f flags 0x40101] (d=0, p=0)
[ 1.671190] pci 0000:03:00.1: BAR 0: reserving [mem 0xf7080000-0xf7083fff flags 0x40200] (d=0, p=0)
[ 1.671194] pci 0000:04:00.0: BAR 0: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0)
[ 1.671195] pci 0000:04:00.0: BAR 2: reserving [mem 0xf7604000-0xf7604fff flags 0x140204] (d=0, p=0)
[ 1.671196] pci 0000:04:00.0: BAR 4: reserving [mem 0xf7600000-0xf7603fff flags 0x140204] (d=0, p=0)
[ 1.671211] pci 0000:05:00.1: BAR 0: reserving [mem 0xf7300000-0xf73fffff flags 0x140204] (d=0, p=0)
[ 1.671213] pci 0000:05:00.3: BAR 0: reserving [mem 0xf7200000-0xf72fffff flags 0x140204] (d=0, p=0)
[ 1.671216] pci 0000:06:00.0: BAR 5: reserving [mem 0xf7500000-0xf75007ff flags 0x40200] (d=0, p=0)
[ 1.671220] pci 0000:07:00.0: BAR 5: reserving [mem 0xf7400000-0xf74007ff flags 0x40200] (d=0, p=0)
[ 1.671223] pci 0000:08:00.0: BAR 0: reserving [mem 0xf0800000-0xf0807fff flags 0x14220c] (d=0, p=0)
[ 1.671224] pci 0000:08:00.0: BAR 2: reserving [mem 0xf0000000-0xf07fffff flags 0x14220c] (d=0, p=0)
[ 1.671225] pci 0000:08:00.0: BAR 4: reserving [mem 0xec000000-0xefffffff flags 0x14220c] (d=0, p=0)
[ 1.671231] pci 0000:0a:00.1: BAR 2: reserving [mem 0xf7900000-0xf79fffff flags 0x40200] (d=0, p=0)
[ 1.671231] pci 0000:0a:00.1: BAR 5: reserving [mem 0xf7a08000-0xf7a09fff flags 0x40200] (d=0, p=0)
[ 1.671233] pci 0000:0a:00.3: BAR 0: reserving [mem 0xf7800000-0xf78fffff flags 0x140204] (d=0, p=0)
[ 1.671234] pci 0000:0a:00.4: BAR 0: reserving [mem 0xf7a00000-0xf7a07fff flags 0x40200] (d=0, p=0)
[ 1.671236] pci 0000:0b:00.0: BAR 5: reserving [mem 0xf7c00000-0xf7c007ff flags 0x40200] (d=0, p=0)
[ 1.671238] pci 0000:0c:00.0: BAR 5: reserving [mem 0xf7b00000-0xf7b007ff flags 0x40200] (d=0, p=0)
[ 1.671293] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 1.671293] e820: reserve RAM buffer [mem 0x09d02000-0x0bffffff]
[ 1.671294] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 1.671294] e820: reserve RAM buffer [mem 0xd8984000-0xdbffffff]
[ 1.671295] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[ 1.671295] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[ 1.671311] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.675764] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.683782] clocksource: Switched to clocksource tsc-early
[ 1.762934] VFS: Disk quotas dquot_6.6.0
[ 1.766865] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.773767] pnp: PnP ACPI init
[ 1.776867] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.783476] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.783517] system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
[ 1.790126] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.790145] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.790211] system 00:03: [io 0x0290-0x029f] has been reserved
[ 1.796134] system 00:03: [io 0x0200-0x021f] has been reserved
[ 1.802056] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.802187] pnp 00:04: [dma 0 disabled]
[ 1.802203] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.802326] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 1.808245] system 00:05: [io 0x040b] has been reserved
[ 1.813557] system 00:05: [io 0x04d6] has been reserved
[ 1.818863] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 1.824777] system 00:05: [io 0x0c14] has been reserved
[ 1.830084] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 1.836003] system 00:05: [io 0x0c52] has been reserved
[ 1.841309] system 00:05: [io 0x0c6c] has been reserved
[ 1.846614] system 00:05: [io 0x0c6f] has been reserved
[ 1.851921] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 1.857843] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 1.863766] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 1.869684] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 1.875597] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 1.881510] system 00:05: [io 0x0800-0x089f] has been reserved
[ 1.887423] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 1.893337] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 1.899257] system 00:05: [io 0x0900-0x090f] has been reserved
[ 1.905171] system 00:05: [io 0x0910-0x091f] has been reserved
[ 1.911091] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.918043] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 1.924997] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 1.931603] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.938212] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 1.945173] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 1.951786] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 1.958394] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.958587] pnp: PnP ACPI: found 6 devices
[ 1.967903] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.976780] NET: Registered protocol family 2
[ 1.981223] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 1.989843] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.998033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 2.005533] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.012180] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 2.019001] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 2.026284] NET: Registered protocol family 1
[ 2.030720] RPC: Registered named UNIX socket transport module.
[ 2.036640] RPC: Registered udp transport module.
[ 2.041346] RPC: Registered tcp transport module.
[ 2.046047] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.052560] pci 0000:02:04.0: PCI bridge to [bus 03]
[ 2.057528] pci 0000:02:04.0: bridge window [io 0xf000-0xffff]
[ 2.063621] pci 0000:02:04.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 2.070409] pci 0000:02:04.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 2.078153] pci 0000:02:05.0: PCI bridge to [bus 04]
[ 2.083118] pci 0000:02:05.0: bridge window [io 0xe000-0xefff]
[ 2.089216] pci 0000:02:05.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 2.096010] pci 0000:02:08.0: PCI bridge to [bus 05]
[ 2.100979] pci 0000:02:08.0: bridge window [mem 0xf7200000-0xf73fffff]
[ 2.107774] pci 0000:02:09.0: PCI bridge to [bus 06]
[ 2.112745] pci 0000:02:09.0: bridge window [mem 0xf7500000-0xf75fffff]
[ 2.119537] pci 0000:02:0a.0: PCI bridge to [bus 07]
[ 2.124502] pci 0000:02:0a.0: bridge window [mem 0xf7400000-0xf74fffff]
[ 2.131295] pci 0000:01:00.0: PCI bridge to [bus 02-07]
[ 2.136523] pci 0000:01:00.0: bridge window [io 0xe000-0xffff]
[ 2.142620] pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf76fffff]
[ 2.149409] pci 0000:01:00.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 2.157156] pci 0000:00:01.2: PCI bridge to [bus 01-07]
[ 2.162379] pci 0000:00:01.2: bridge window [io 0xe000-0xffff]
[ 2.168475] pci 0000:00:01.2: bridge window [mem 0xf6000000-0xf76fffff]
[ 2.175261] pci 0000:00:01.2: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 2.183006] pci 0000:00:03.1: PCI bridge to [bus 08]
[ 2.187973] pci 0000:00:03.1: bridge window [mem 0xec000000-0xf08fffff 64bit pref]
[ 2.195715] pci 0000:00:07.1: PCI bridge to [bus 09]
[ 2.200686] pci 0000:00:08.1: PCI bridge to [bus 0a]
[ 2.205651] pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 2.212442] pci 0000:00:08.2: PCI bridge to [bus 0b]
[ 2.217407] pci 0000:00:08.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 2.224196] pci 0000:00:08.3: PCI bridge to [bus 0c]
[ 2.229165] pci 0000:00:08.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 2.235956] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 2.242132] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 2.248306] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 2.254486] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 2.260659] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 2.267525] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 2.274395] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xf7ffffff window]
[ 2.281355] pci_bus 0000:01: resource 0 [io 0xe000-0xffff]
[ 2.286930] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf76fffff]
[ 2.293188] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 2.300403] pci_bus 0000:02: resource 0 [io 0xe000-0xffff]
[ 2.305978] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf76fffff]
[ 2.312244] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 2.319459] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 2.325033] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
[ 2.331302] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
[ 2.338515] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 2.344081] pci_bus 0000:04: resource 1 [mem 0xf7600000-0xf76fffff]
[ 2.350341] pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf73fffff]
[ 2.356610] pci_bus 0000:06: resource 1 [mem 0xf7500000-0xf75fffff]
[ 2.362878] pci_bus 0000:07: resource 1 [mem 0xf7400000-0xf74fffff]
[ 2.369146] pci_bus 0000:08: resource 2 [mem 0xec000000-0xf08fffff 64bit pref]
[ 2.376370] pci_bus 0000:0a: resource 1 [mem 0xf7800000-0xf7afffff]
[ 2.382638] pci_bus 0000:0b: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 2.388905] pci_bus 0000:0c: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 2.395256] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.403612] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[ 2.409992] pci 0000:03:00.1: saving config space at offset 0x0 (reading 0xe0f10de)
[ 2.409994] pci 0000:03:00.1: saving config space at offset 0x4 (reading 0x100006)
[ 2.409997] pci 0000:03:00.1: saving config space at offset 0x8 (reading 0x40300a1)
[ 2.409999] pci 0000:03:00.1: saving config space at offset 0xc (reading 0x800010)
[ 2.410001] pci 0000:03:00.1: saving config space at offset 0x10 (reading 0xf7080000)
[ 2.410003] pci 0000:03:00.1: saving config space at offset 0x14 (reading 0x0)
[ 2.410005] pci 0000:03:00.1: saving config space at offset 0x18 (reading 0x0)
[ 2.410007] pci 0000:03:00.1: saving config space at offset 0x1c (reading 0x0)
[ 2.410009] pci 0000:03:00.1: saving config space at offset 0x20 (reading 0x0)
[ 2.410012] pci 0000:03:00.1: saving config space at offset 0x24 (reading 0x0)
[ 2.410014] pci 0000:03:00.1: saving config space at offset 0x28 (reading 0x0)
[ 2.410016] pci 0000:03:00.1: saving config space at offset 0x2c (reading 0x536019da)
[ 2.410018] pci 0000:03:00.1: saving config space at offset 0x30 (reading 0x0)
[ 2.410020] pci 0000:03:00.1: saving config space at offset 0x34 (reading 0x60)
[ 2.410022] pci 0000:03:00.1: saving config space at offset 0x38 (reading 0x0)
[ 2.410024] pci 0000:03:00.1: saving config space at offset 0x3c (reading 0x2ff)
[ 2.410068] IOAPIC[1]: Set routing entry (14-4 -> 0xef -> IRQ 24 Mode:1 Active:1 Dest:0)
[ 2.410228] IOAPIC[1]: Set routing entry (14-6 -> 0xef -> IRQ 25 Mode:1 Active:1 Dest:0)
[ 2.410295] IOAPIC[1]: Set routing entry (14-11 -> 0xef -> IRQ 25 Mode:1 Active:1 Dest:0)
[ 2.410309] IOAPIC[1]: Set routing entry (14-15 -> 0xef -> IRQ 26 Mode:1 Active:1 Dest:0)
[ 2.410336] PCI: CLS 64 bytes, default 64
[ 2.734198] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 2.741098] pci 0000:00:01.0: Adding to iommu group 0
[ 2.746160] pci 0000:00:01.2: Adding to iommu group 1
[ 2.751215] pci 0000:00:02.0: Adding to iommu group 2
[ 2.756271] pci 0000:00:03.0: Adding to iommu group 3
[ 2.761332] pci 0000:00:03.1: Adding to iommu group 4
[ 2.766385] pci 0000:00:04.0: Adding to iommu group 5
[ 2.771441] pci 0000:00:05.0: Adding to iommu group 6
[ 2.776506] pci 0000:00:07.0: Adding to iommu group 7
[ 2.781566] pci 0000:00:07.1: Adding to iommu group 8
[ 2.786630] pci 0000:00:08.0: Adding to iommu group 9
[ 2.791692] pci 0000:00:08.1: Adding to iommu group 10
[ 2.796834] pci 0000:00:08.2: Adding to iommu group 11
[ 2.801977] pci 0000:00:08.3: Adding to iommu group 12
[ 2.807126] pci 0000:00:14.0: Adding to iommu group 13
[ 2.812273] pci 0000:00:14.3: Adding to iommu group 13
[ 2.817433] pci 0000:00:18.0: Adding to iommu group 14
[ 2.822570] pci 0000:00:18.1: Adding to iommu group 14
[ 2.827713] pci 0000:00:18.2: Adding to iommu group 14
[ 2.832851] pci 0000:00:18.3: Adding to iommu group 14
[ 2.837994] pci 0000:00:18.4: Adding to iommu group 14
[ 2.843136] pci 0000:00:18.5: Adding to iommu group 14
[ 2.848278] pci 0000:00:18.6: Adding to iommu group 14
[ 2.853419] pci 0000:00:18.7: Adding to iommu group 14
[ 2.858563] pci 0000:01:00.0: Adding to iommu group 15
[ 2.863736] pci 0000:02:04.0: Adding to iommu group 16
[ 2.868904] pci 0000:02:05.0: Adding to iommu group 17
[ 2.874054] pci 0000:02:08.0: Adding to iommu group 18
[ 2.879203] pci 0000:02:09.0: Adding to iommu group 19
[ 2.884352] pci 0000:02:0a.0: Adding to iommu group 20
[ 2.889533] pci 0000:03:00.0: Adding to iommu group 21
[ 2.894713] pci 0000:03:00.1: Adding to iommu group 21
[ 2.899882] pci 0000:04:00.0: Adding to iommu group 22
[ 2.905029] pci 0000:05:00.0: Adding to iommu group 18
[ 2.910171] pci 0000:05:00.1: Adding to iommu group 18
[ 2.915313] pci 0000:05:00.3: Adding to iommu group 18
[ 2.920453] pci 0000:06:00.0: Adding to iommu group 19
[ 2.925594] pci 0000:07:00.0: Adding to iommu group 20
[ 2.930740] pci 0000:08:00.0: Adding to iommu group 23
[ 2.935887] pci 0000:09:00.0: Adding to iommu group 24
[ 2.941031] pci 0000:0a:00.0: Adding to iommu group 25
[ 2.946180] pci 0000:0a:00.1: Adding to iommu group 26
[ 2.951332] pci 0000:0a:00.3: Adding to iommu group 27
[ 2.956479] pci 0000:0a:00.4: Adding to iommu group 28
[ 2.961628] pci 0000:0b:00.0: Adding to iommu group 29
[ 2.966780] pci 0000:0c:00.0: Adding to iommu group 30
[ 2.975975] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 2.981466] pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
[ 2.988511] PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 2.993165] AMD-Vi: Lazy IO/TLB flushing enabled
[ 2.998714] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 3.006626] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.012289] amd_uncore: AMD NB counters detected
[ 3.016907] amd_uncore: AMD LLC counters detected
[ 3.022063] LVT offset 0 assigned for vector 0x400
[ 3.027125] perf: AMD IBS detected (0x000003ff)
[ 3.031656] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 3.039634] check: Scanning for low memory corruption every 60 seconds
[ 3.046440] Initialise system trusted keyrings
[ 3.050935] workingset: timestamp_bits=56 max_order=22 bucket_order=0
[ 3.058115] NFS: Registering the id_resolver key type
[ 3.063171] Key type id_resolver registered
[ 3.067356] Key type id_legacy registered
[ 3.074124] Key type asymmetric registered
[ 3.078221] Asymmetric key parser 'x509' registered
[ 3.083106] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.090498] io scheduler mq-deadline registered
[ 3.095030] io scheduler kyber registered
[ 3.099062] test_firmware: interface ready
[ 3.103438] pcieport 0000:00:01.2: runtime IRQ mapping not provided by arch
[ 3.103469] pcieport 0000:00:01.2: saving config space at offset 0x0 (reading 0x14831022)
[ 3.103470] pcieport 0000:00:01.2: saving config space at offset 0x4 (reading 0x100407)
[ 3.103471] pcieport 0000:00:01.2: saving config space at offset 0x8 (reading 0x6040000)
[ 3.103472] pcieport 0000:00:01.2: saving config space at offset 0xc (reading 0x810010)
[ 3.103473] pcieport 0000:00:01.2: saving config space at offset 0x10 (reading 0x0)
[ 3.103474] pcieport 0000:00:01.2: saving config space at offset 0x14 (reading 0x0)
[ 3.103475] pcieport 0000:00:01.2: saving config space at offset 0x18 (reading 0x70100)
[ 3.103476] pcieport 0000:00:01.2: saving config space at offset 0x1c (reading 0x2000f1e1)
[ 3.103477] pcieport 0000:00:01.2: saving config space at offset 0x20 (reading 0xf760f600)
[ 3.103478] pcieport 0000:00:01.2: saving config space at offset 0x24 (reading 0xe9f1e001)
[ 3.103479] pcieport 0000:00:01.2: saving config space at offset 0x28 (reading 0x0)
[ 3.103480] pcieport 0000:00:01.2: saving config space at offset 0x2c (reading 0x0)
[ 3.103481] pcieport 0000:00:01.2: saving config space at offset 0x30 (reading 0x0)
[ 3.103482] pcieport 0000:00:01.2: saving config space at offset 0x34 (reading 0x50)
[ 3.103484] pcieport 0000:00:01.2: saving config space at offset 0x38 (reading 0x0)
[ 3.103485] pcieport 0000:00:01.2: saving config space at offset 0x3c (reading 0x1a00ff)
[ 3.103515] pcieport 0000:00:03.1: runtime IRQ mapping not provided by arch
[ 3.103542] pcieport 0000:00:03.1: saving config space at offset 0x0 (reading 0x14831022)
[ 3.103543] pcieport 0000:00:03.1: saving config space at offset 0x4 (reading 0x100407)
[ 3.103544] pcieport 0000:00:03.1: saving config space at offset 0x8 (reading 0x6040000)
[ 3.103546] pcieport 0000:00:03.1: saving config space at offset 0xc (reading 0x810010)
[ 3.103547] pcieport 0000:00:03.1: saving config space at offset 0x10 (reading 0x0)
[ 3.103548] pcieport 0000:00:03.1: saving config space at offset 0x14 (reading 0x0)
[ 3.103549] pcieport 0000:00:03.1: saving config space at offset 0x18 (reading 0x80800)
[ 3.103550] pcieport 0000:00:03.1: saving config space at offset 0x1c (reading 0x1f1)
[ 3.103551] pcieport 0000:00:03.1: saving config space at offset 0x20 (reading 0xfff0)
[ 3.103552] pcieport 0000:00:03.1: saving config space at offset 0x24 (reading 0xf081ec01)
[ 3.103553] pcieport 0000:00:03.1: saving config space at offset 0x28 (reading 0x0)
[ 3.103555] pcieport 0000:00:03.1: saving config space at offset 0x2c (reading 0x0)
[ 3.103556] pcieport 0000:00:03.1: saving config space at offset 0x30 (reading 0x0)
[ 3.103557] pcieport 0000:00:03.1: saving config space at offset 0x34 (reading 0x50)
[ 3.103558] pcieport 0000:00:03.1: saving config space at offset 0x38 (reading 0x0)
[ 3.103559] pcieport 0000:00:03.1: saving config space at offset 0x3c (reading 0x1200ff)
[ 3.103590] pcieport 0000:00:07.1: runtime IRQ mapping not provided by arch
[ 3.103639] IOAPIC[1]: Set routing entry (14-10 -> 0xef -> IRQ 29 Mode:1 Active:1 Dest:0)
[ 3.103661] pcieport 0000:00:07.1: saving config space at offset 0x0 (reading 0x14841022)
[ 3.103662] pcieport 0000:00:07.1: saving config space at offset 0x4 (reading 0x100407)
[ 3.103663] pcieport 0000:00:07.1: saving config space at offset 0x8 (reading 0x6040000)
[ 3.103664] pcieport 0000:00:07.1: saving config space at offset 0xc (reading 0x810010)
[ 3.103665] pcieport 0000:00:07.1: saving config space at offset 0x10 (reading 0x0)
[ 3.103666] pcieport 0000:00:07.1: saving config space at offset 0x14 (reading 0x0)
[ 3.103667] pcieport 0000:00:07.1: saving config space at offset 0x18 (reading 0x90900)
[ 3.103668] pcieport 0000:00:07.1: saving config space at offset 0x1c (reading 0x1f1)
[ 3.103669] pcieport 0000:00:07.1: saving config space at offset 0x20 (reading 0xfff0)
[ 3.103670] pcieport 0000:00:07.1: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.103671] pcieport 0000:00:07.1: saving config space at offset 0x28 (reading 0x0)
[ 3.103672] pcieport 0000:00:07.1: saving config space at offset 0x2c (reading 0x0)
[ 3.103673] pcieport 0000:00:07.1: saving config space at offset 0x30 (reading 0x0)
[ 3.103674] pcieport 0000:00:07.1: saving config space at offset 0x34 (reading 0x50)
[ 3.103675] pcieport 0000:00:07.1: saving config space at offset 0x38 (reading 0x0)
[ 3.103676] pcieport 0000:00:07.1: saving config space at offset 0x3c (reading 0x1201ff)
[ 3.103698] pcieport 0000:00:08.1: runtime IRQ mapping not provided by arch
[ 3.103719] pcieport 0000:00:08.1: saving config space at offset 0x0 (reading 0x14841022)
[ 3.103721] pcieport 0000:00:08.1: saving config space at offset 0x4 (reading 0x100407)
[ 3.103722] pcieport 0000:00:08.1: saving config space at offset 0x8 (reading 0x6040000)
[ 3.103723] pcieport 0000:00:08.1: saving config space at offset 0xc (reading 0x810010)
[ 3.103724] pcieport 0000:00:08.1: saving config space at offset 0x10 (reading 0x0)
[ 3.103725] pcieport 0000:00:08.1: saving config space at offset 0x14 (reading 0x0)
[ 3.103726] pcieport 0000:00:08.1: saving config space at offset 0x18 (reading 0xa0a00)
[ 3.103727] pcieport 0000:00:08.1: saving config space at offset 0x1c (reading 0x1f1)
[ 3.103728] pcieport 0000:00:08.1: saving config space at offset 0x20 (reading 0xf7a0f780)
[ 3.103729] pcieport 0000:00:08.1: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.103730] pcieport 0000:00:08.1: saving config space at offset 0x28 (reading 0x0)
[ 3.103731] pcieport 0000:00:08.1: saving config space at offset 0x2c (reading 0x0)
[ 3.103732] pcieport 0000:00:08.1: saving config space at offset 0x30 (reading 0x0)
[ 3.103733] pcieport 0000:00:08.1: saving config space at offset 0x34 (reading 0x50)
[ 3.103734] pcieport 0000:00:08.1: saving config space at offset 0x38 (reading 0x0)
[ 3.103735] pcieport 0000:00:08.1: saving config space at offset 0x3c (reading 0x1201ff)
[ 3.103758] pcieport 0000:00:08.2: runtime IRQ mapping not provided by arch
[ 3.103802] pcieport 0000:00:08.2: saving config space at offset 0x0 (reading 0x14841022)
[ 3.103803] pcieport 0000:00:08.2: saving config space at offset 0x4 (reading 0x100407)
[ 3.103804] pcieport 0000:00:08.2: saving config space at offset 0x8 (reading 0x6040000)
[ 3.103806] pcieport 0000:00:08.2: saving config space at offset 0xc (reading 0x810010)
[ 3.103807] pcieport 0000:00:08.2: saving config space at offset 0x10 (reading 0x0)
[ 3.103808] pcieport 0000:00:08.2: saving config space at offset 0x14 (reading 0x0)
[ 3.103809] pcieport 0000:00:08.2: saving config space at offset 0x18 (reading 0xb0b00)
[ 3.103810] pcieport 0000:00:08.2: saving config space at offset 0x1c (reading 0x1f1)
[ 3.103811] pcieport 0000:00:08.2: saving config space at offset 0x20 (reading 0xf7c0f7c0)
[ 3.103812] pcieport 0000:00:08.2: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.103813] pcieport 0000:00:08.2: saving config space at offset 0x28 (reading 0x0)
[ 3.103814] pcieport 0000:00:08.2: saving config space at offset 0x2c (reading 0x0)
[ 3.103815] pcieport 0000:00:08.2: saving config space at offset 0x30 (reading 0x0)
[ 3.103816] pcieport 0000:00:08.2: saving config space at offset 0x34 (reading 0x50)
[ 3.103817] pcieport 0000:00:08.2: saving config space at offset 0x38 (reading 0x0)
[ 3.103818] pcieport 0000:00:08.2: saving config space at offset 0x3c (reading 0x1201ff)
[ 3.103841] pcieport 0000:00:08.3: runtime IRQ mapping not provided by arch
[ 3.103881] pcieport 0000:00:08.3: saving config space at offset 0x0 (reading 0x14841022)
[ 3.103882] pcieport 0000:00:08.3: saving config space at offset 0x4 (reading 0x100407)
[ 3.103883] pcieport 0000:00:08.3: saving config space at offset 0x8 (reading 0x6040000)
[ 3.103884] pcieport 0000:00:08.3: saving config space at offset 0xc (reading 0x810010)
[ 3.103885] pcieport 0000:00:08.3: saving config space at offset 0x10 (reading 0x0)
[ 3.103886] pcieport 0000:00:08.3: saving config space at offset 0x14 (reading 0x0)
[ 3.103887] pcieport 0000:00:08.3: saving config space at offset 0x18 (reading 0xc0c00)
[ 3.103888] pcieport 0000:00:08.3: saving config space at offset 0x1c (reading 0x1f1)
[ 3.103889] pcieport 0000:00:08.3: saving config space at offset 0x20 (reading 0xf7b0f7b0)
[ 3.103890] pcieport 0000:00:08.3: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.103891] pcieport 0000:00:08.3: saving config space at offset 0x28 (reading 0x0)
[ 3.103892] pcieport 0000:00:08.3: saving config space at offset 0x2c (reading 0x0)
[ 3.103893] pcieport 0000:00:08.3: saving config space at offset 0x30 (reading 0x0)
[ 3.103894] pcieport 0000:00:08.3: saving config space at offset 0x34 (reading 0x50)
[ 3.103895] pcieport 0000:00:08.3: saving config space at offset 0x38 (reading 0x0)
[ 3.103896] pcieport 0000:00:08.3: saving config space at offset 0x3c (reading 0x1201ff)
[ 3.103921] pcieport 0000:01:00.0: runtime IRQ mapping not provided by arch
[ 3.103932] pcieport 0000:01:00.0: saving config space at offset 0x0 (reading 0x57ad1022)
[ 3.103934] pcieport 0000:01:00.0: saving config space at offset 0x4 (reading 0x100007)
[ 3.103936] pcieport 0000:01:00.0: saving config space at offset 0x8 (reading 0x6040000)
[ 3.103937] pcieport 0000:01:00.0: saving config space at offset 0xc (reading 0x10010)
[ 3.103939] pcieport 0000:01:00.0: saving config space at offset 0x10 (reading 0x0)
[ 3.103941] pcieport 0000:01:00.0: saving config space at offset 0x14 (reading 0x0)
[ 3.103943] pcieport 0000:01:00.0: saving config space at offset 0x18 (reading 0x70201)
[ 3.103945] pcieport 0000:01:00.0: saving config space at offset 0x1c (reading 0xf1e1)
[ 3.103946] pcieport 0000:01:00.0: saving config space at offset 0x20 (reading 0xf760f600)
[ 3.103948] pcieport 0000:01:00.0: saving config space at offset 0x24 (reading 0xe9f1e001)
[ 3.103950] pcieport 0000:01:00.0: saving config space at offset 0x28 (reading 0x0)
[ 3.103952] pcieport 0000:01:00.0: saving config space at offset 0x2c (reading 0x0)
[ 3.103953] pcieport 0000:01:00.0: saving config space at offset 0x30 (reading 0x0)
[ 3.103955] pcieport 0000:01:00.0: saving config space at offset 0x34 (reading 0x50)
[ 3.103957] pcieport 0000:01:00.0: saving config space at offset 0x38 (reading 0x0)
[ 3.103959] pcieport 0000:01:00.0: saving config space at offset 0x3c (reading 0x1a010b)
[ 3.104003] pcieport 0000:02:04.0: runtime IRQ mapping not provided by arch
[ 3.104066] pcieport 0000:02:04.0: saving config space at offset 0x0 (reading 0x57a31022)
[ 3.104068] pcieport 0000:02:04.0: saving config space at offset 0x4 (reading 0x100407)
[ 3.104070] pcieport 0000:02:04.0: saving config space at offset 0x8 (reading 0x6040000)
[ 3.104071] pcieport 0000:02:04.0: saving config space at offset 0xc (reading 0x810010)
[ 3.104073] pcieport 0000:02:04.0: saving config space at offset 0x10 (reading 0x0)
[ 3.104075] pcieport 0000:02:04.0: saving config space at offset 0x14 (reading 0x0)
[ 3.104077] pcieport 0000:02:04.0: saving config space at offset 0x18 (reading 0x30302)
[ 3.104078] pcieport 0000:02:04.0: saving config space at offset 0x1c (reading 0x2000f1f1)
[ 3.104080] pcieport 0000:02:04.0: saving config space at offset 0x20 (reading 0xf700f600)
[ 3.104082] pcieport 0000:02:04.0: saving config space at offset 0x24 (reading 0xe9f1e001)
[ 3.104084] pcieport 0000:02:04.0: saving config space at offset 0x28 (reading 0x0)
[ 3.104086] pcieport 0000:02:04.0: saving config space at offset 0x2c (reading 0x0)
[ 3.104087] pcieport 0000:02:04.0: saving config space at offset 0x30 (reading 0x0)
[ 3.104089] pcieport 0000:02:04.0: saving config space at offset 0x34 (reading 0x50)
[ 3.104091] pcieport 0000:02:04.0: saving config space at offset 0x38 (reading 0x0)
[ 3.104093] pcieport 0000:02:04.0: saving config space at offset 0x3c (reading 0x1a00ff)
[ 3.104176] pcieport 0000:02:05.0: runtime IRQ mapping not provided by arch
[ 3.104238] pcieport 0000:02:05.0: saving config space at offset 0x0 (reading 0x57a31022)
[ 3.104239] pcieport 0000:02:05.0: saving config space at offset 0x4 (reading 0x100407)
[ 3.104241] pcieport 0000:02:05.0: saving config space at offset 0x8 (reading 0x6040000)
[ 3.104243] pcieport 0000:02:05.0: saving config space at offset 0xc (reading 0x810010)
[ 3.104245] pcieport 0000:02:05.0: saving config space at offset 0x10 (reading 0x0)
[ 3.104247] pcieport 0000:02:05.0: saving config space at offset 0x14 (reading 0x0)
[ 3.104248] pcieport 0000:02:05.0: saving config space at offset 0x18 (reading 0x40402)
[ 3.104250] pcieport 0000:02:05.0: saving config space at offset 0x1c (reading 0xe1e1)
[ 3.104252] pcieport 0000:02:05.0: saving config space at offset 0x20 (reading 0xf760f760)
[ 3.104254] pcieport 0000:02:05.0: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.104255] pcieport 0000:02:05.0: saving config space at offset 0x28 (reading 0x0)
[ 3.104257] pcieport 0000:02:05.0: saving config space at offset 0x2c (reading 0x0)
[ 3.104259] pcieport 0000:02:05.0: saving config space at offset 0x30 (reading 0x0)
[ 3.104261] pcieport 0000:02:05.0: saving config space at offset 0x34 (reading 0x50)
[ 3.104263] pcieport 0000:02:05.0: saving config space at offset 0x38 (reading 0x0)
[ 3.104264] pcieport 0000:02:05.0: saving config space at offset 0x3c (reading 0x1200ff)
[ 3.104347] pcieport 0000:02:08.0: runtime IRQ mapping not provided by arch
[ 3.104407] pcieport 0000:02:08.0: saving config space at offset 0x0 (reading 0x57a41022)
[ 3.104408] pcieport 0000:02:08.0: saving config space at offset 0x4 (reading 0x100407)
[ 3.104410] pcieport 0000:02:08.0: saving config space at offset 0x8 (reading 0x6040000)
[ 3.104412] pcieport 0000:02:08.0: saving config space at offset 0xc (reading 0x810010)
[ 3.104414] pcieport 0000:02:08.0: saving config space at offset 0x10 (reading 0x0)
[ 3.104416] pcieport 0000:02:08.0: saving config space at offset 0x14 (reading 0x0)
[ 3.104417] pcieport 0000:02:08.0: saving config space at offset 0x18 (reading 0x50502)
[ 3.104419] pcieport 0000:02:08.0: saving config space at offset 0x1c (reading 0x1f1)
[ 3.104421] pcieport 0000:02:08.0: saving config space at offset 0x20 (reading 0xf730f720)
[ 3.104423] pcieport 0000:02:08.0: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.104424] pcieport 0000:02:08.0: saving config space at offset 0x28 (reading 0x0)
[ 3.104426] pcieport 0000:02:08.0: saving config space at offset 0x2c (reading 0x0)
[ 3.104428] pcieport 0000:02:08.0: saving config space at offset 0x30 (reading 0x0)
[ 3.104430] pcieport 0000:02:08.0: saving config space at offset 0x34 (reading 0x50)
[ 3.104432] pcieport 0000:02:08.0: saving config space at offset 0x38 (reading 0x0)
[ 3.104433] pcieport 0000:02:08.0: saving config space at offset 0x3c (reading 0x12010b)
[ 3.104496] pcieport 0000:02:09.0: runtime IRQ mapping not provided by arch
[ 3.104512] IOAPIC[1]: Set routing entry (14-5 -> 0xef -> IRQ 37 Mode:1 Active:1 Dest:0)
[ 3.104572] pcieport 0000:02:09.0: saving config space at offset 0x0 (reading 0x57a41022)
[ 3.104574] pcieport 0000:02:09.0: saving config space at offset 0x4 (reading 0x100407)
[ 3.104575] pcieport 0000:02:09.0: saving config space at offset 0x8 (reading 0x6040000)
[ 3.104577] pcieport 0000:02:09.0: saving config space at offset 0xc (reading 0x810010)
[ 3.104579] pcieport 0000:02:09.0: saving config space at offset 0x10 (reading 0x0)
[ 3.104581] pcieport 0000:02:09.0: saving config space at offset 0x14 (reading 0x0)
[ 3.104582] pcieport 0000:02:09.0: saving config space at offset 0x18 (reading 0x60602)
[ 3.104584] pcieport 0000:02:09.0: saving config space at offset 0x1c (reading 0x1f1)
[ 3.104586] pcieport 0000:02:09.0: saving config space at offset 0x20 (reading 0xf750f750)
[ 3.104588] pcieport 0000:02:09.0: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.104590] pcieport 0000:02:09.0: saving config space at offset 0x28 (reading 0x0)
[ 3.104591] pcieport 0000:02:09.0: saving config space at offset 0x2c (reading 0x0)
[ 3.104593] pcieport 0000:02:09.0: saving config space at offset 0x30 (reading 0x0)
[ 3.104595] pcieport 0000:02:09.0: saving config space at offset 0x34 (reading 0x50)
[ 3.104597] pcieport 0000:02:09.0: saving config space at offset 0x38 (reading 0x0)
[ 3.104598] pcieport 0000:02:09.0: saving config space at offset 0x3c (reading 0x12010a)
[ 3.104661] pcieport 0000:02:0a.0: runtime IRQ mapping not provided by arch
[ 3.104675] IOAPIC[1]: Set routing entry (14-6 -> 0xef -> IRQ 39 Mode:1 Active:1 Dest:0)
[ 3.104733] pcieport 0000:02:0a.0: saving config space at offset 0x0 (reading 0x57a41022)
[ 3.104735] pcieport 0000:02:0a.0: saving config space at offset 0x4 (reading 0x100407)
[ 3.104736] pcieport 0000:02:0a.0: saving config space at offset 0x8 (reading 0x6040000)
[ 3.104738] pcieport 0000:02:0a.0: saving config space at offset 0xc (reading 0x810010)
[ 3.104740] pcieport 0000:02:0a.0: saving config space at offset 0x10 (reading 0x0)
[ 3.104742] pcieport 0000:02:0a.0: saving config space at offset 0x14 (reading 0x0)
[ 3.104744] pcieport 0000:02:0a.0: saving config space at offset 0x18 (reading 0x70702)
[ 3.104745] pcieport 0000:02:0a.0: saving config space at offset 0x1c (reading 0x1f1)
[ 3.104747] pcieport 0000:02:0a.0: saving config space at offset 0x20 (reading 0xf740f740)
[ 3.104749] pcieport 0000:02:0a.0: saving config space at offset 0x24 (reading 0x1fff1)
[ 3.104751] pcieport 0000:02:0a.0: saving config space at offset 0x28 (reading 0x0)
[ 3.104752] pcieport 0000:02:0a.0: saving config space at offset 0x2c (reading 0x0)
[ 3.104754] pcieport 0000:02:0a.0: saving config space at offset 0x30 (reading 0x0)
[ 3.104756] pcieport 0000:02:0a.0: saving config space at offset 0x34 (reading 0x50)
[ 3.104758] pcieport 0000:02:0a.0: saving config space at offset 0x38 (reading 0x0)
[ 3.104759] pcieport 0000:02:0a.0: saving config space at offset 0x3c (reading 0x12010f)
[ 3.104909] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.113268] ACPI: Power Button [PWRB]
[ 3.116946] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.124355] ACPI: Power Button [PWRF]
[ 3.128121] Monitor-Mwait will be used to enter C-1 state
[ 3.128127] ACPI: \_PR_.C000: Found 2 idle states
[ 3.132920] ACPI: \_PR_.C002: Found 2 idle states
[ 3.137724] ACPI: \_PR_.C004: Found 2 idle states
[ 3.142487] ACPI: \_PR_.C006: Found 2 idle states
[ 3.147295] ACPI: \_PR_.C008: Found 2 idle states
[ 3.152106] ACPI: \_PR_.C00A: Found 2 idle states
[ 3.156887] ACPI: \_PR_.C001: Found 2 idle states
[ 3.161709] ACPI: \_PR_.C003: Found 2 idle states
[ 3.166537] ACPI: \_PR_.C005: Found 2 idle states
[ 3.171333] ACPI: \_PR_.C007: Found 2 idle states
[ 3.176111] ACPI: \_PR_.C009: Found 2 idle states
[ 3.180894] ACPI: \_PR_.C00B: Found 2 idle states
[ 3.185771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.192091] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.199697] Non-volatile memory driver v1.3
[ 3.203905] Linux agpgart interface v0.103
[ 3.208011] agpgart-amd64 0000:00:00.0: runtime IRQ mapping not provided by arch
[ 3.208015] agpgart-amd64 0000:00:01.0: runtime IRQ mapping not provided by arch
[ 3.208018] agpgart-amd64 0000:00:02.0: runtime IRQ mapping not provided by arch
[ 3.208021] agpgart-amd64 0000:00:03.0: runtime IRQ mapping not provided by arch
[ 3.208024] agpgart-amd64 0000:00:04.0: runtime IRQ mapping not provided by arch
[ 3.208027] agpgart-amd64 0000:00:05.0: runtime IRQ mapping not provided by arch
[ 3.208030] agpgart-amd64 0000:00:07.0: runtime IRQ mapping not provided by arch
[ 3.208032] agpgart-amd64 0000:00:08.0: runtime IRQ mapping not provided by arch
[ 3.208036] agpgart-amd64 0000:00:14.0: runtime IRQ mapping not provided by arch
[ 3.208039] agpgart-amd64 0000:00:14.3: runtime IRQ mapping not provided by arch
[ 3.208043] agpgart-amd64 0000:00:18.0: runtime IRQ mapping not provided by arch
[ 3.208045] agpgart-amd64 0000:00:18.1: runtime IRQ mapping not provided by arch
[ 3.208047] agpgart-amd64 0000:00:18.2: runtime IRQ mapping not provided by arch
[ 3.208050] agpgart-amd64 0000:00:18.3: runtime IRQ mapping not provided by arch
[ 3.208052] agpgart-amd64 0000:00:18.4: runtime IRQ mapping not provided by arch
[ 3.208054] agpgart-amd64 0000:00:18.5: runtime IRQ mapping not provided by arch
[ 3.208056] agpgart-amd64 0000:00:18.6: runtime IRQ mapping not provided by arch
[ 3.208058] agpgart-amd64 0000:00:18.7: runtime IRQ mapping not provided by arch
[ 3.208062] agpgart-amd64 0000:03:00.0: runtime IRQ mapping not provided by arch
[ 3.208073] agpgart-amd64 0000:03:00.1: runtime IRQ mapping not provided by arch
[ 3.208142] agpgart-amd64 0000:03:00.1: saving config space at offset 0x0 (reading 0xe0f10de)
[ 3.208145] agpgart-amd64 0000:03:00.1: saving config space at offset 0x4 (reading 0x100006)
[ 3.208147] agpgart-amd64 0000:03:00.1: saving config space at offset 0x8 (reading 0x40300a1)
[ 3.208149] agpgart-amd64 0000:03:00.1: saving config space at offset 0xc (reading 0x800010)
[ 3.208151] agpgart-amd64 0000:03:00.1: saving config space at offset 0x10 (reading 0xf7080000)
[ 3.208153] agpgart-amd64 0000:03:00.1: saving config space at offset 0x14 (reading 0x0)
[ 3.208155] agpgart-amd64 0000:03:00.1: saving config space at offset 0x18 (reading 0x0)
[ 3.208158] agpgart-amd64 0000:03:00.1: saving config space at offset 0x1c (reading 0x0)
[ 3.208160] agpgart-amd64 0000:03:00.1: saving config space at offset 0x20 (reading 0x0)
[ 3.208162] agpgart-amd64 0000:03:00.1: saving config space at offset 0x24 (reading 0x0)
[ 3.208164] agpgart-amd64 0000:03:00.1: saving config space at offset 0x28 (reading 0x0)
[ 3.208166] agpgart-amd64 0000:03:00.1: saving config space at offset 0x2c (reading 0x536019da)
[ 3.208168] agpgart-amd64 0000:03:00.1: saving config space at offset 0x30 (reading 0x0)
[ 3.208170] agpgart-amd64 0000:03:00.1: saving config space at offset 0x34 (reading 0x60)
[ 3.208173] agpgart-amd64 0000:03:00.1: saving config space at offset 0x38 (reading 0x0)
[ 3.208175] agpgart-amd64 0000:03:00.1: saving config space at offset 0x3c (reading 0x2ff)
[ 3.208199] agpgart-amd64 0000:04:00.0: runtime IRQ mapping not provided by arch
[ 3.208213] agpgart-amd64 0000:05:00.0: runtime IRQ mapping not provided by arch
[ 3.208222] agpgart-amd64 0000:05:00.1: runtime IRQ mapping not provided by arch
[ 3.208289] agpgart-amd64 0000:05:00.3: runtime IRQ mapping not provided by arch
[ 3.208301] agpgart-amd64 0000:06:00.0: runtime IRQ mapping not provided by arch
[ 3.208313] agpgart-amd64 0000:07:00.0: runtime IRQ mapping not provided by arch
[ 3.208325] agpgart-amd64 0000:08:00.0: runtime IRQ mapping not provided by arch
[ 3.208335] agpgart-amd64 0000:09:00.0: runtime IRQ mapping not provided by arch
[ 3.208340] agpgart-amd64 0000:0a:00.0: runtime IRQ mapping not provided by arch
[ 3.208346] agpgart-amd64 0000:0a:00.1: runtime IRQ mapping not provided by arch
[ 3.208353] agpgart-amd64 0000:0a:00.3: runtime IRQ mapping not provided by arch
[ 3.208360] agpgart-amd64 0000:0a:00.4: runtime IRQ mapping not provided by arch
[ 3.208366] agpgart-amd64 0000:0b:00.0: runtime IRQ mapping not provided by arch
[ 3.208373] agpgart-amd64 0000:0c:00.0: runtime IRQ mapping not provided by arch
[ 3.210495] loop: module loaded
[ 3.213816] ahci 0000:06:00.0: runtime IRQ mapping not provided by arch
[ 3.213818] ahci 0000:06:00.0: version 3.0
[ 3.213946] ahci 0000:06:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 3.222035] ahci 0000:06:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 3.230936] scsi host0: ahci
[ 3.233848] ata1: SATA max UDMA/133 abar m2048@0xf7500000 port 0xf7500100 irq 41
[ 3.241242] ahci 0000:07:00.0: runtime IRQ mapping not provided by arch
[ 3.241351] ahci 0000:07:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[ 3.249440] ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 3.258348] scsi host1: ahci
[ 3.261293] scsi host2: ahci
[ 3.264201] ata2: DUMMY
[ 3.266652] ata3: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400180 irq 42
[ 3.274053] ahci 0000:0b:00.0: runtime IRQ mapping not provided by arch
[ 3.274076] IOAPIC[1]: Set routing entry (14-17 -> 0xef -> IRQ 43 Mode:1 Active:1 Dest:0)
[ 3.274128] ahci 0000:0b:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 3.282215] ahci 0000:0b:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 3.291091] scsi host3: ahci
[ 3.293999] ata4: SATA max UDMA/133 abar m2048@0xf7c00000 port 0xf7c00100 irq 44
[ 3.301397] ahci 0000:0c:00.0: runtime IRQ mapping not provided by arch
[ 3.301417] IOAPIC[1]: Set routing entry (14-21 -> 0xef -> IRQ 45 Mode:1 Active:1 Dest:0)
[ 3.301465] ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 3.309550] ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 3.318419] scsi host4: ahci
[ 3.321326] ata5: SATA max UDMA/133 abar m2048@0xf7b00000 port 0xf7b00100 irq 46
[ 3.328847] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 3.334936] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.340430] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.347472] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.353217] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.359045] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.364970] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 3.371932] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.377510] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.385334] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.391254] sky2: driver version 1.30
[ 3.394946] r8169 0000:04:00.0: runtime IRQ mapping not provided by arch
[ 3.394977] r8169 0000:04:00.0: enabling Mem-Wr-Inval
[ 3.402292] kworker/u64:5 (142) used greatest stack depth: 14576 bytes left
[ 3.402357] libphy: r8169: probed
[ 3.412663] r8169 0000:04:00.0 eth0: RTL8168h/8111h, a8:5e:45:e7:e4:72, XID 541, IRQ 47
[ 3.420658] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 3.429190] PPP generic driver version 2.4.2
[ 3.433496] usbcore: registered new interface driver r8152
[ 3.438982] usbcore: registered new interface driver asix
[ 3.444383] usbcore: registered new interface driver ax88179_178a
[ 3.450477] usbcore: registered new interface driver cdc_ether
[ 3.456313] usbcore: registered new interface driver net1080
[ 3.461973] usbcore: registered new interface driver cdc_subset
[ 3.467895] usbcore: registered new interface driver zaurus
[ 3.473473] usbcore: registered new interface driver cdc_ncm
[ 3.479166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.485694] ehci-pci: EHCI PCI platform driver
[ 3.490146] ehci-platform: EHCI generic platform driver
[ 3.495374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.501553] ohci-pci: OHCI PCI platform driver
[ 3.506005] ohci-platform: OHCI generic platform driver
[ 3.511229] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.517598] xhci_hcd 0000:05:00.1: runtime IRQ mapping not provided by arch
[ 3.517684] xhci_hcd 0000:05:00.1: enabling bus mastering
[ 3.517978] xhci_hcd 0000:05:00.1: xHCI Host Controller
[ 3.523235] xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 1
[ 3.530780] xhci_hcd 0000:05:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 3.539933] xhci_hcd 0000:05:00.1: enabling Mem-Wr-Inval
[ 3.540445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 3.545197] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.548702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.548703] usb usb1: Product: xHCI Host Controller
[ 3.566205] usb usb1: Manufacturer: Linux 5.8.0-rc6 xhci-hcd
[ 3.571858] usb usb1: SerialNumber: 0000:05:00.1
[ 3.576532] hub 1-0:1.0: USB hub found
[ 3.580296] hub 1-0:1.0: 6 ports detected
[ 3.584588] xhci_hcd 0000:05:00.1: xHCI Host Controller
[ 3.589845] xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 2
[ 3.597236] xhci_hcd 0000:05:00.1: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.604291] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.612174] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.612380] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 3.626021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.633242] usb usb2: Product: xHCI Host Controller
[ 3.633343] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.638114] usb usb2: Manufacturer: Linux 5.8.0-rc6 xhci-hcd
[ 3.638115] usb usb2: SerialNumber: 0000:05:00.1
[ 3.638212] hub 2-0:1.0: USB hub found
[ 3.657541] hub 2-0:1.0: 4 ports detected
[ 3.661743] xhci_hcd 0000:05:00.3: runtime IRQ mapping not provided by arch
[ 3.661769] xhci_hcd 0000:05:00.3: enabling bus mastering
[ 3.661771] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 3.667025] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 3
[ 3.674570] xhci_hcd 0000:05:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 3.683696] xhci_hcd 0000:05:00.3: enabling Mem-Wr-Inval
[ 3.683887] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 3.692146] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.699360] usb usb3: Product: xHCI Host Controller
[ 3.704233] usb usb3: Manufacturer: Linux 5.8.0-rc6 xhci-hcd
[ 3.709894] usb usb3: SerialNumber: 0000:05:00.3
[ 3.714584] hub 3-0:1.0: USB hub found
[ 3.718344] hub 3-0:1.0: 6 ports detected
[ 3.722628] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 3.727883] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 4
[ 3.735273] xhci_hcd 0000:05:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.739810] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.742331] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.749679] ata3.00: ATA-11: WDC WDS100T2B0A-00SM50, 401020WD, max UDMA/133
[ 3.756598] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 3.763640] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.765896] ata3.00: configured for UDMA/133
[ 3.771911] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.771912] usb usb4: Product: xHCI Host Controller
[ 3.771913] usb usb4: Manufacturer: Linux 5.8.0-rc6 xhci-hcd
[ 3.771914] usb usb4: SerialNumber: 0000:05:00.3
[ 3.778851] scsi 2:0:0:0: Direct-Access ATA WDC WDS100T2B0A 20WD PQ: 0 ANSI: 5
[ 3.783111] hub 4-0:1.0: USB hub found
[ 3.790371] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.790372] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.790376] sd 2:0:0:0: [sda] Write Protect is off
[ 3.790377] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.790383] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.795180] hub 4-0:1.0: 4 ports detected
[ 3.801196] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.805643] xhci_hcd 0000:0a:00.3: runtime IRQ mapping not provided by arch
[ 3.852747] IOAPIC[1]: Set routing entry (14-15 -> 0xef -> IRQ 57 Mode:1 Active:1 Dest:0)
[ 3.852755] xhci_hcd 0000:0a:00.3: enabling bus mastering
[ 3.852757] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[ 3.858015] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 5
[ 3.865512] xhci_hcd 0000:0a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[ 3.874637] xhci_hcd 0000:0a:00.3: enabling Mem-Wr-Inval
[ 3.874776] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 3.883034] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.890247] usb usb5: Product: xHCI Host Controller
[ 3.895123] usb usb5: Manufacturer: Linux 5.8.0-rc6 xhci-hcd
[ 3.900784] usb usb5: SerialNumber: 0000:0a:00.3
[ 3.905479] hub 5-0:1.0: USB hub found
[ 3.909232] hub 5-0:1.0: 4 ports detected
[ 3.913366] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[ 3.918609] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 6
[ 3.926005] xhci_hcd 0000:0a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.933058] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.941146] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 3.949402] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.956615] usb usb6: Product: xHCI Host Controller
[ 3.956771] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 3.961488] usb usb6: Manufacturer: Linux 5.8.0-rc6 xhci-hcd
[ 3.961488] usb usb6: SerialNumber: 0000:0a:00.3
[ 3.961533] hub 6-0:1.0: USB hub found
[ 3.981955] hub 6-0:1.0: 4 ports detected
[ 3.986076] usbcore: registered new interface driver cdc_acm
[ 3.991731] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.999735] usbcore: registered new interface driver usblp
[ 4.005230] usbcore: registered new interface driver usb-storage
[ 4.011243] usbcore: registered new interface driver ftdi_sio
[ 4.016988] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 4.024373] usbcore: registered new interface driver pl2303
[ 4.029940] usbserial: USB Serial support registered for pl2303
[ 4.035863] i8042: PNP: No PS/2 controller found.
[ 4.040635] rtc_cmos 00:02: RTC can wake from S4
[ 4.045384] rtc_cmos 00:02: registered as rtc0
[ 4.049836] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.057487] i2c /dev entries driver
[ 4.059784] tsc: Refined TSC clocksource calibration: 3792.875 MHz
[ 4.061017] usbcore: registered new interface driver uvcvideo
[ 4.067170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d581b92771, max_idle_ns: 881590605997 ns
[ 4.069769] usb 3-6: new full-speed USB device number 2 using xhci_hcd
[ 4.072908] USB Video Class driver (1.1.1)
[ 4.072942] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 4.101968] clocksource: Switched to clocksource tsc
[ 4.101986] hid: raw HID events driver (C) Jiri Kosina
[ 4.112148] usbcore: registered new interface driver usbhid
[ 4.117716] usbhid: USB HID core driver
[ 4.121646] snd_hda_intel 0000:03:00.1: runtime IRQ mapping not provided by arch
[ 4.121731] snd_hda_intel 0000:03:00.1: Disabling MSI
[ 4.126845] snd_hda_intel 0000:0a:00.4: runtime IRQ mapping not provided by arch
[ 4.126866] IOAPIC[1]: Set routing entry (14-12 -> 0xef -> IRQ 66 Mode:1 Active:1 Dest:0)
[ 4.126948] GACT probability on
[ 4.130102] Mirror/redirect action on
[ 4.130371] usb 1-1: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[ 4.133783] Simple TC action Loaded
[ 4.137310] hdaudio hdaudioC0D0: Unable to bind the codec
[ 4.138708] random: fast init done
[ 4.139914] hdaudio hdaudioC1D0: Unable to bind the codec
[ 4.141943] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.145438] u32 classifier
[ 4.150836] usb 1-1: Product: Dell MS116 USB Optical Mouse
[ 4.150838] usb 1-1: Manufacturer: PixArt
[ 4.154245] Performance counters on
[ 4.182857] input device check on
[ 4.186531] Actions configured
[ 4.190056] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:05:00.1/usb1/1-1/1-1:1.0/0003:413C:301A.0001/input/input2
[ 4.206072] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:05:00.1-1/input0
[ 4.210355] usb 3-6: config 1 has an invalid interface number: 2 but max is 1
[ 4.226339] usb 3-6: config 1 has no interface number 1
[ 4.226344] Initializing XFRM netlink socket
[ 4.235896] NET: Registered protocol family 10
[ 4.240517] Segment Routing with IPv6
[ 4.244197] usb 3-6: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00
[ 4.252369] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.259521] usb 3-6: Product: AURA LED Controller
[ 4.264228] usb 3-6: Manufacturer: AsusTek Computer Inc.
[ 4.269560] usb 3-6: SerialNumber: 9876543210
[ 4.269563] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.279917] NET: Registered protocol family 17
[ 4.284380] Key type dns_resolver registered
[ 4.289155] microcode: CPU0: patch_level=0x08701013
[ 4.294037] microcode: CPU1: patch_level=0x08701013
[ 4.295439] hid-generic 0003:0B05:18F3.0002: hiddev96,hidraw1: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:05:00.3-6/input2
[ 4.298931] microcode: CPU2: patch_level=0x08701013
[ 4.317786] microcode: CPU3: patch_level=0x08701013
[ 4.322670] microcode: CPU4: patch_level=0x08701013
[ 4.327551] microcode: CPU5: patch_level=0x08701013
[ 4.332432] microcode: CPU6: patch_level=0x08701013
[ 4.332770] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 4.337312] microcode: CPU7: patch_level=0x08701013
[ 4.348621] microcode: CPU8: patch_level=0x08701013
[ 4.353501] microcode: CPU9: patch_level=0x08701013
[ 4.358385] microcode: CPU10: patch_level=0x08701013
[ 4.363352] microcode: CPU11: patch_level=0x08701013
[ 4.368319] microcode: Microcode Update Driver: v2.2.
[ 4.368320] IPI shorthand broadcast: enabled
[ 4.377662] ... APIC ID: 00000000 (0)
[ 4.378661] ... APIC VERSION: 80050010
[ 4.378661] 0000000000000000000000000000000000000000000000000000000000000000
[ 4.378661] 0000000000000000000000000000000000000000000000000000000000000000
[ 4.378661] 0000000000000000000000000000000000000000000000000000000008000000
[ 4.406630] number of MP IRQ sources: 15.
[ 4.406631] number of IO-APIC #13 registers: 24.
[ 4.406631] number of IO-APIC #14 registers: 32.
[ 4.406631] testing the IO APIC.......................
[ 4.411774] IO APIC #13......
[ 4.411775] .... register #00: 0D000000
[ 4.411775] ....... : physical APIC id: 0D
[ 4.411775] ....... : Delivery Type: 0
[ 4.411775] ....... : LTS : 0
[ 4.411776] .... register #01: 00178021
[ 4.411776] ....... : max redirection entries: 17
[ 4.411776] ....... : PRQ implemented: 1
[ 4.411776] ....... : IO APIC version: 21
[ 4.411777] .... register #02: 0D000000
[ 4.411777] ....... : arbitration: 0D
[ 4.411777] .... register #03: 00000000
[ 4.411777] ....... : Boot DT : 0
[ 4.411778] .... IRQ redirection table:
[ 4.411778] IOAPIC 0:
[ 4.411783] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411788] pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411792] pin02, enabled , edge , high, V(30), IRR(0), S(0), physical, D(00), M(0)
[ 4.411797] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411802] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411806] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411811] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411815] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411820] pin08, enabled , edge , high, V(23), IRR(0), S(0), physical, D(0D), M(0)
[ 4.411824] pin09, enabled , level, low , V(21), IRR(0), S(0), physical, D(02), M(0)
[ 4.411829] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411834] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411838] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411843] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411847] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411852] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411856] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411861] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411866] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411870] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411875] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411879] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411884] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411888] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411892] IO APIC #14......
[ 4.411892] .... register #00: 0E000000
[ 4.411892] ....... : physical APIC id: 0E
[ 4.411892] ....... : Delivery Type: 0
[ 4.411892] ....... : LTS : 0
[ 4.411893] .... register #01: 001F8021
[ 4.411893] ....... : max redirection entries: 1F
[ 4.411893] ....... : PRQ implemented: 1
[ 4.411893] ....... : IO APIC version: 21
[ 4.411893] .... register #02: 00000000
[ 4.411894] ....... : arbitration: 00
[ 4.411894] .... IRQ redirection table:
[ 4.411894] IOAPIC 1:
[ 4.411896] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411898] pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411901] pin02, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411903] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411905] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411907] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411909] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411912] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411914] pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411916] pin09, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411918] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411920] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411923] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411925] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411927] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411929] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411931] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411934] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411936] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411938] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411940] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411942] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411945] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411947] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411949] pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411951] pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411953] pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411956] pin1b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411958] pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411960] pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411962] pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411964] pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 4.411964] IRQ to pin mappings:
[ 4.411965] IRQ0 -> 0:2
[ 4.411966] IRQ1 -> 0:1
[ 4.411966] IRQ3 -> 0:3
[ 4.411967] IRQ4 -> 0:4
[ 4.411967] IRQ5 -> 0:5
[ 4.411968] IRQ6 -> 0:6
[ 4.411968] IRQ7 -> 0:7
[ 4.411968] IRQ8 -> 0:8
[ 4.411969] IRQ9 -> 0:9
[ 4.411969] IRQ10 -> 0:10
[ 4.411969] IRQ11 -> 0:11
[ 4.411970] IRQ12 -> 0:12
[ 4.411970] IRQ13 -> 0:13
[ 4.411971] IRQ14 -> 0:14
[ 4.411971] IRQ15 -> 0:15
[ 4.411971] IRQ24 -> 1:4
[ 4.411972] IRQ25 -> 1:11
[ 4.411973] IRQ29 -> 1:10
[ 4.411973] IRQ37 -> 1:5
[ 4.411974] IRQ39 -> 1:6
[ 4.411974] IRQ43 -> 1:17
[ 4.411975] IRQ45 -> 1:21
[ 4.411976] IRQ57 -> 1:15
[ 4.411976] .................................... done.
[ 4.417120] sched_clock: Marking stable (4420347789, -3236013)->(4764721554, -347609778)
[ 4.425271] registered taskstats version 1
[ 4.429370] Loading compiled-in X.509 certificates
[ 4.434291] Key type encrypted registered
[ 4.438310] ima: No TPM chip found, activating TPM-bypass!
[ 4.443794] ima: Allocated hash algorithm: sha1
[ 4.448333] ima: No architecture policies found
[ 4.452866] evm: Initialising EVM extended attributes:
[ 4.458004] evm: security.selinux
[ 4.461325] evm: security.ima
[ 4.464297] evm: security.capability
[ 4.467870] evm: HMAC attrs: 0x1
[ 4.471314] PM: Magic number: 12:905:414
[ 4.475428] thermal cooling_device10: hash matches
[ 4.480229] pci 0000:00:18.6: hash matches
[ 4.484349] printk: console [netcon0] enabled
[ 4.487369] usb 1-2: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.78
[ 4.488705] netconsole: network logging started
[ 4.501417] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.508552] usb 1-2: Product: Dell USB Entry Keyboard
[ 4.513606] usb 1-2: Manufacturer: DELL
[ 4.517512] acpi_cpufreq: overriding BIOS provided _PSD data
[ 4.539469] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:05:00.1/usb1/1-2/1-2:1.0/0003:413C:2107.0003/input/input3
[ 4.607032] hid-generic 0003:413C:2107.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:05:00.1-2/input0
[ 4.619961] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
[ 4.629004] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8168h-2.fw (-2)
[ 4.657769] Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[ 4.767835] r8169 0000:04:00.0 eth0: Link is Down
[ 8.353007] r8169 0000:04:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 8.354800] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.366875] Sending DHCP requests ., OK
[ 8.374609] IP-Config: Got DHCP answer from 192.168.1.100, my address is 192.168.1.103
[ 8.382517] IP-Config: Complete:
[ 8.385752] device=eth0, hwaddr=a8:5e:45:e7:e4:72, ipaddr=192.168.1.103, mask=255.255.255.0, gw=192.168.1.254
[ 8.396093] host=192.168.1.103, domain=broadcom.com, nis-domain=(none)
[ 8.403046] bootserver=192.168.1.100, rootserver=192.168.1.100, rootpath=
[ 8.403047] nameserver0=192.168.1.100, nameserver1=192.168.1.1
[ 8.416554] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.424657] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.431200] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 8.431823] ALSA device list:
[ 8.439811] cfg80211: failed to load regulatory.db
[ 8.442783] No soundcards found.
[ 8.451089] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 8.458888] nfs: Deprecated parameter 'intr'
[ 8.465605] VFS: Mounted root (nfs filesystem) readonly on device 0:18.
[ 8.472349] devtmpfs: mounted
[ 8.476580] Freeing unused kernel image (initmem) memory: 1604K
[ 8.487768] Write protecting the kernel read-only data: 24576k
[ 8.494255] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 8.501486] Freeing unused kernel image (rodata/data gap) memory: 2000K
[ 8.508172] Run /sbin/init as init process
[ 8.512329] with arguments:
[ 8.512329] /sbin/init
[ 8.512330] nfsrootdebug
[ 8.512330] with environment:
[ 8.512330] HOME=/
[ 8.512330] TERM=linux
[ 8.512331] BOOT_IMAGE=/bzImage
[ 8.579332] mount (162) used greatest stack depth: 12128 bytes left
[ 8.608036] random: crng init done
[ 8.685141] udevd[191]: starting version 3.2.9
[ 8.778879] udevd[192]: starting eudev-3.2.9
[ 8.804682] piix4_smbus 0000:00:14.0: runtime IRQ mapping not provided by arch
[ 8.804706] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.812259] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 8.820064] bcm-vk 0000:08:00.0: runtime IRQ mapping not provided by arch
[ 8.820108] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 8.820127] IOAPIC[1]: Set routing entry (14-30 -> 0xef -> IRQ 66 Mode:1 Active:1 Dest:0)
[ 8.827655] bcm-vk 0000:08:00.0: Number of IRQs 6 allocated - requested(6).
[ 8.834858] bcm-vk 0000:08:00.0: BAR1 msgq marker not initialized.
[ 8.841176] bcm-vk 0000:08:00.0: create sysfs group for bcm-vk
[ 8.847514] bcm-vk 0000:08:00.0: BCM-VK:0 created, 0x00000000d12489bf
[ 8.847515] bcm-vk 0000:08:00.0: Load All for device 0
[ 8.859259] bcm-vk 0000:08:00.0: boot-status value for next image: 0x10006 : fw-status 0x0
[ 10.544790] bcm-vk 0000:08:00.0: Auto load vk-boot1.bin, ret 0
[ 10.550687] bcm-vk 0000:08:00.0: boot-status value for next image: 0x20006 : fw-status 0x0
[ 11.775769] bcm-vk 0000:08:00.0: Exit boot2 download
[ 15.767776] bcm-vk 0000:08:00.0: Pre-release major.minor=0.1 - drv 1.0
[ 15.774411] bcm-vk 0000:08:00.0: MsgQ[0] type 0 num 0, @ 0x0, db_offset 0x484 rd_idx 0 wr_idx 0, size 256, nxt 0x8
[ 15.784896] bcm-vk 0000:08:00.0: MsgQ[1] type 0 num 1, @ 0x1000, db_offset 0x48c rd_idx 0 wr_idx 0, size 256, nxt 0x8
[ 15.795619] bcm-vk 0000:08:00.0: MsgQ[2] type 0 num 2, @ 0x2000, db_offset 0x494 rd_idx 0 wr_idx 0, size 256, nxt 0x8
[ 15.806319] bcm-vk 0000:08:00.0: MsgQ[0] type 1 num 0, @ 0x3000, db_offset 0x0 rd_idx 0 wr_idx 0, size 256, nxt 0x8
[ 15.816885] bcm-vk 0000:08:00.0: MsgQ[1] type 1 num 1, @ 0x4000, db_offset 0x0 rd_idx 0 wr_idx 0, size 256, nxt 0x8
[ 15.827490] bcm-vk 0000:08:00.0: MsgQ[2] type 1 num 2, @ 0x5000, db_offset 0x0 rd_idx 0 wr_idx 0, size 256, nxt 0x8
[ 15.838233] bcm-vk 0000:08:00.0: Auto load vk-boot2.bin, ret 0
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-27 20:51 ` Thomas Gleixner
2020-07-27 21:06 ` Scott Branden
@ 2020-07-27 22:48 ` Scott Branden
2020-07-28 8:22 ` Thomas Gleixner
1 sibling, 1 reply; 10+ messages in thread
From: Scott Branden @ 2020-07-27 22:48 UTC (permalink / raw)
To: Thomas Gleixner, bp, x86, mingo; +Cc: linux-kernel
Bios now updated to latest. Same kernel panic issue. Log below.
I think it is related to power cycling quickly.
Should APIC work if PC power cycled in a few seconds or is that the problem?
On 2020-07-27 1:51 p.m., Thomas Gleixner wrote:
> Scott,
>
> Scott Branden <scott.branden@broadcom.com> writes:
>
>> Occasionally I get the following Kernel panic on boot. This is
>> running on the latest kernel but have seen it previously as well.
>> "Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with
>> apic=debug and send a report."
>>
>> I don't know who I am support to send a report to. But here is the log with apic=debug
>> [ 0.006000] ENABLING IO-APIC IRQs
>> [ 0.007000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.007000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>> [ 0.007000] ...trying to set up timer (IRQ0) through the 8259A ...
>> [ 0.007000] ..... (found apic 0 pin 2) ...
>> [ 0.007000] ....... failed.
>> [ 0.007000] ...trying to set up timer as Virtual Wire IRQ...
>> [ 0.007000] ..... failed.
>> [ 0.007000] ...trying to set up timer as ExtINT IRQ...
>> [ 0.007000] ..... failed :(.
>> [ 0.007000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
> Nothing which rings a bell. Can you please provide a boot log from a
> successful boot with apic=debug on the command line?
>
> Also you might check whether there are BIOS updates for this board. The
> early Ryzen BIOSes had some rough edges.
Same issue with latest BIOS:
Loading /bzImage... ok
[ 0.000000] Linux version 5.8.0-rc6 (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sat Jul 25 03:55:25 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrootdebug
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a210000-0x00000000ca47ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca480000-0x00000000ca7acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca7ad000-0x00000000ca8fcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ca8fd000-0x00000000cafb4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafb5000-0x00000000cbbfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000042f380000-0x000000042fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME X570-P, BIOS 2407 07/01/2020
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] last_pfn = 0x42f380 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] Scan for SMP in [mem 0x0009d400-0x0009d7ff]
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CA8FB728 0000BC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] ACPI: FACP 0x00000000CA8EC000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CA8DF000 00C38D (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000CAF98000 000040
[ 0.000000] ACPI: SSDT 0x00000000CA8F2000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000CA8EE000 003A78 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CA8ED000 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.000000] ACPI: FIDT 0x00000000CA8DE000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: WSMT 0x00000000CA8D8000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CA8DC000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000CA8DB000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CA8DA000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.000000] ACPI: WPBT 0x00000000CA7FF000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.000000] ACPI: IVRS 0x00000000CA7FE000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.000000] ACPI: PCCT 0x00000000CA7FD000 00006E (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CA7FA000 002F29 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000CA7F9000 000B58 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000CA7F8000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CA7F7000 00052C (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CA7F3000 003282 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: APIC 0x00000000CA7F1000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CA7F0000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f37c000-0x42f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a210000-0x00000000ca47ffff]
[ 0.000000] node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 22644 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f37ffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID d, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID d, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID d, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID d, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID d, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID d, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID d, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID d, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID d, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID d, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID d, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID d, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID d, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID d, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID d, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000)
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca480000-0xca7acfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca7ad000-0xca8fcfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca8fd000-0xcafb4fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcafb5000-0xcbbfefff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd5fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfe9fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 52 pages/cpu s172760 r8192 d32040 u262144
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4106455
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrg
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 16292300K/16686640K available (16388K kernel code, 1982K rwdata, 4144K rodata, 1604K init, 1484K bss, 394340K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] ftrace: allocating 48968 entries in 192 pages
[ 0.000000] ftrace: allocated 192 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1224, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x361/0x531 with crng_init=0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20200528
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] Switched APIC routing to physical flat.
[ 0.003000] enabled ExtINT on CPU#0
[ 0.005000] ENABLING IO-APIC IRQs
[ 0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.006000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.006000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.006000] ..... (found apic 0 pin 2) ...
[ 0.006000] ....... failed.
[ 0.006000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.006000] ..... failed.
[ 0.006000] ...trying to set up timer as ExtINT IRQ...
[ 0.006000] ..... failed :(.
[ 0.006000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
[ 0.006000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.8.0-rc6 #1
[ 0.006000] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 2407 07/01/2020
[ 0.006000] Call Trace:
[ 0.006000] dump_stack+0x78/0xa0
[ 0.006000] panic+0x100/0x2c6
[ 0.006000] setup_IO_APIC+0x826/0x86a
[ 0.006000] ? clear_IO_APIC_pin+0x173/0x240
[ 0.006000] x86_late_time_init+0x20/0x30
[ 0.006000] start_kernel+0x478/0x531
[ 0.006000] secondary_startup_64+0xb6/0xc0
[ 0.006000] ---[ end Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. ]---
>
> Thanks,
>
> tglx
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-27 22:48 ` Scott Branden
@ 2020-07-28 8:22 ` Thomas Gleixner
2020-07-28 17:30 ` Scott Branden
0 siblings, 1 reply; 10+ messages in thread
From: Thomas Gleixner @ 2020-07-28 8:22 UTC (permalink / raw)
To: Scott Branden, bp, x86, mingo; +Cc: linux-kernel
Scott,
Scott Branden <scott.branden@broadcom.com> writes:
> Bios now updated to latest. Same kernel panic issue. Log below.
>
> I think it is related to power cycling quickly.
> Should APIC work if PC power cycled in a few seconds or is that the
> problem?
Yes, emphasis on should. Just to clarify, if you reboot it works and
cold start works as well if power was off long enough?
> [ 0.000000] Linux version 5.8.0-rc6 (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sat Jul 25 03:55:25 UTC 2020
> [ 0.000000] Command line: BOOT_IMAGE=/bzImage ima_policy=tcb
> apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200
> root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait
> nfsrootdebug
The working dmesg and the failing console log are hard to compare
because the latter does not contain debug level printks. Please add
'ignore_loglevel' to the command line parameters.
Thanks,
tglx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-28 8:22 ` Thomas Gleixner
@ 2020-07-28 17:30 ` Scott Branden
2020-07-29 9:50 ` Thomas Gleixner
0 siblings, 1 reply; 10+ messages in thread
From: Scott Branden @ 2020-07-28 17:30 UTC (permalink / raw)
To: Thomas Gleixner, bp, x86, mingo; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1473 bytes --]
Hi Thomas,
On 2020-07-28 1:22 a.m., Thomas Gleixner wrote:
> Scott,
>
> Scott Branden <scott.branden@broadcom.com> writes:
>> Bios now updated to latest. Same kernel panic issue. Log below.
>>
>> I think it is related to power cycling quickly.
>> Should APIC work if PC power cycled in a few seconds or is that the
>> problem?
> Yes, emphasis on should. Just to clarify, if you reboot it works and
> cold start works as well if power was off long enough?
So far I have only been able to reproduce the issue by cold start with power off for only a few seconds
before re-powering the system. It has not failed via reboot yet that I remember.
Will have to keep my eye on whether using reboot is an issue or not.
And also keeping power off longer when doing a cold start.
>
>> [ 0.000000] Linux version 5.8.0-rc6 (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sat Jul 25 03:55:25 UTC 2020
>> [ 0.000000] Command line: BOOT_IMAGE=/bzImage ima_policy=tcb
>> apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200
>> root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait
>> nfsrootdebug
> The working dmesg and the failing console log are hard to compare
> because the latter does not contain debug level printks. Please add
> 'ignore_loglevel' to the command line parameters.
Please find attached the failed console log with ignore_loglevel.
>
> Thanks,
>
> tglx
Regards,
Scott
[-- Attachment #2: ignore_loglevel_fail.txt --]
[-- Type: text/plain, Size: 20976 bytes --]
Loading /bzImage... ok
[ 0.000000] Linux version 5.8.0-rc6 (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sat Jul 25 03:55:25 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=/bzImage ignore_loglevel ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrootdebug
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a210000-0x00000000ca47ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca480000-0x00000000ca7acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca7ad000-0x00000000ca8fcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ca8fd000-0x00000000cafb4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafb5000-0x00000000cbbfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000042f380000-0x000000042fffffff] reserved
[ 0.000000] printk: debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME X570-P, BIOS 2407 07/01/2020
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x42f380 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CB320000 mask FFFFFFFF0000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000430000000 aka 17152M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xcb320000-0xcb32ffff] usable ==> reserved
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] Scan for SMP in [mem 0x0009d400-0x0009d7ff]
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CA8FB728 0000BC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] ACPI: FACP 0x00000000CA8EC000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CA8DF000 00C38D (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000CAF98000 000040
[ 0.000000] ACPI: SSDT 0x00000000CA8F2000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000CA8EE000 003A78 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CA8ED000 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.000000] ACPI: FIDT 0x00000000CA8DE000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CA7F0000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] ACPI: MCFG 0x00000000CA8DC000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000CA8DB000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CA8DA000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.000000] ACPI: WPBT 0x00000000CA7FF000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.000000] ACPI: IVRS 0x00000000CA7FE000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.000000] ACPI: PCCT 0x00000000CA7FD000 00006E (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CA7FA000 002F29 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000CA7F9000 000B58 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000CA7F8000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CA7F7000 00052C (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CA7F3000 003282 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: WSMT 0x00000000CA7F2000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: APIC 0x00000000CA7F1000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f37c000-0x42f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a210000-0x00000000ca47ffff]
[ 0.000000] node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 22644 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f37ffff]
[ 0.000000] On node 0 totalpages: 4171660
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12946 pages used for memmap
[ 0.000000] DMA32 zone: 828528 pages, LIFO batch:63
[ 0.000000] Normal zone: 52174 pages used for memmap
[ 0.000000] Normal zone: 3339136 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID d, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID d, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID d, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID d, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID d, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID d, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID d, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID d, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID d, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID d, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID d, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID d, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID d, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID d, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID d, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000)
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca480000-0xca7acfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca7ad000-0xca8fcfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca8fd000-0xcafb4fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcafb5000-0xcbbfefff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd5fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfe9fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 52 pages/cpu s172760 r8192 d32040 u262144
[ 0.000000] pcpu-alloc: s172760 r8192 d32040 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4106455
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/bzImage ignore_loglevel ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrootdebug
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 16292312K/16686640K available (16388K kernel code, 1982K rwdata, 4144K rodata, 1604K init, 1484K bss, 394328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] ftrace: allocating 48968 entries in 192 pages
[ 0.000000] ftrace: allocated 192 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1224, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x361/0x531 with crng_init=0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20200528
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] Switched APIC routing to physical flat.
[ 0.003000] enabled ExtINT on CPU#0
[ 0.005000] ENABLING IO-APIC IRQs
[ 0.006000] init IO_APIC IRQs
[ 0.007000] apic 13 pin 0 not connected
[ 0.008000] IOAPIC[0]: Set routing entry (13-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-5 -> 0xef -> IRQ 5 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-9 -> 0xef -> IRQ 9 Mode:1 Active:1 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-10 -> 0xef -> IRQ 10 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-11 -> 0xef -> IRQ 11 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:0)
[ 0.009000] IOAPIC[0]: Set routing entry (13-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:0)
[ 0.009000] apic 13 pin 16 not connected
[ 0.009000] apic 13 pin 17 not connected
[ 0.009000] apic 13 pin 18 not connected
[ 0.009000] apic 13 pin 19 not connected
[ 0.009000] apic 13 pin 20 not connected
[ 0.009000] apic 13 pin 21 not connected
[ 0.009000] apic 13 pin 22 not connected
[ 0.009000] apic 13 pin 23 not connected
[ 0.009000] apic 14 pin 0 not connected
[ 0.009000] apic 14 pin 1 not connected
[ 0.009000] apic 14 pin 2 not connected
[ 0.009000] apic 14 pin 3 not connected
[ 0.009000] apic 14 pin 4 not connected
[ 0.009000] apic 14 pin 5 not connected
[ 0.009000] apic 14 pin 6 not connected
[ 0.009000] apic 14 pin 7 not connected
[ 0.009000] apic 14 pin 8 not connected
[ 0.009000] apic 14 pin 9 not connected
[ 0.009000] apic 14 pin 10 not connected
[ 0.009000] apic 14 pin 11 not connected
[ 0.009000] apic 14 pin 12 not connected
[ 0.009000] apic 14 pin 13 not connected
[ 0.009000] apic 14 pin 14 not connected
[ 0.009000] apic 14 pin 15 not connected
[ 0.009000] apic 14 pin 16 not connected
[ 0.009000] apic 14 pin 17 not connected
[ 0.009000] apic 14 pin 18 not connected
[ 0.009000] apic 14 pin 19 not connected
[ 0.009000] apic 14 pin 20 not connected
[ 0.009000] apic 14 pin 21 not connected
[ 0.009000] apic 14 pin 22 not connected
[ 0.009000] apic 14 pin 23 not connected
[ 0.009000] apic 14 pin 24 not connected
[ 0.009000] apic 14 pin 25 not connected
[ 0.009000] apic 14 pin 26 not connected
[ 0.009000] apic 14 pin 27 not connected
[ 0.009000] apic 14 pin 28 not connected
[ 0.009000] apic 14 pin 29 not connected
[ 0.009000] apic 14 pin 30 not connected
[ 0.009000] apic 14 pin 31 not connected
[ 0.009000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.009000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.009000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.009000] ..... (found apic 0 pin 2) ...
[ 0.009000] ....... failed.
[ 0.009000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.009000] ..... failed.
[ 0.009000] ...trying to set up timer as ExtINT IRQ...
[ 0.009000] ..... failed :(.
[ 0.009000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
[ 0.009000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.8.0-rc6 #1
[ 0.009000] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 2407 07/01/2020
[ 0.009000] Call Trace:
[ 0.009000] dump_stack+0x78/0xa0
[ 0.009000] panic+0x100/0x2c6
[ 0.009000] setup_IO_APIC+0x826/0x86a
[ 0.009000] ? clear_IO_APIC_pin+0x173/0x240
[ 0.009000] x86_late_time_init+0x20/0x30
[ 0.009000] start_kernel+0x478/0x531
[ 0.009000] secondary_startup_64+0xb6/0xc0
[ 0.009000] ---[ end Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. ]---
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-28 17:30 ` Scott Branden
@ 2020-07-29 9:50 ` Thomas Gleixner
2020-07-29 18:29 ` Tom Lendacky
0 siblings, 1 reply; 10+ messages in thread
From: Thomas Gleixner @ 2020-07-29 9:50 UTC (permalink / raw)
To: Scott Branden, bp, x86, mingo; +Cc: linux-kernel, Tom Lendacky
Scott,
Scott Branden <scott.branden@broadcom.com> writes:
> On 2020-07-28 1:22 a.m., Thomas Gleixner wrote:
>> Scott Branden <scott.branden@broadcom.com> writes:
>>> Bios now updated to latest. Same kernel panic issue. Log below.
>>>
>>> I think it is related to power cycling quickly.
>>> Should APIC work if PC power cycled in a few seconds or is that the
>>> problem?
>> Yes, emphasis on should. Just to clarify, if you reboot it works and
>> cold start works as well if power was off long enough?
>>
> So far I have only been able to reproduce the issue by cold start with power off for only a few seconds
> before re-powering the system. It has not failed via reboot yet that I remember.
> Will have to keep my eye on whether using reboot is an issue or not.
> And also keeping power off longer when doing a cold start.
Weird.
> Please find attached the failed console log with ignore_loglevel.
Aside of the differences caused by the BIOS update there is nothing
related to the APIC/IO-APIC setup which is different between the working
and failing boot.
TBH, I have no idea what's going wrong there. Maybe Tom has one.
Thanks,
tglx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-29 9:50 ` Thomas Gleixner
@ 2020-07-29 18:29 ` Tom Lendacky
2020-07-29 23:28 ` Scott Branden
0 siblings, 1 reply; 10+ messages in thread
From: Tom Lendacky @ 2020-07-29 18:29 UTC (permalink / raw)
To: Thomas Gleixner, Scott Branden, bp, x86, mingo; +Cc: linux-kernel
On 7/29/20 4:50 AM, Thomas Gleixner wrote:
> Scott,
>
> Scott Branden <scott.branden@broadcom.com> writes:
>> On 2020-07-28 1:22 a.m., Thomas Gleixner wrote:
>>> Scott Branden <scott.branden@broadcom.com> writes:
>>>> Bios now updated to latest. Same kernel panic issue. Log below.
>>>>
>>>> I think it is related to power cycling quickly.
>>>> Should APIC work if PC power cycled in a few seconds or is that the
>>>> problem?
>>> Yes, emphasis on should. Just to clarify, if you reboot it works and
>>> cold start works as well if power was off long enough?
>>>
>> So far I have only been able to reproduce the issue by cold start with power off for only a few seconds
>> before re-powering the system. It has not failed via reboot yet that I remember.
>> Will have to keep my eye on whether using reboot is an issue or not.
>> And also keeping power off longer when doing a cold start.
>
> Weird.
>
>> Please find attached the failed console log with ignore_loglevel.
>
> Aside of the differences caused by the BIOS update there is nothing
> related to the APIC/IO-APIC setup which is different between the working
> and failing boot.
>
> TBH, I have no idea what's going wrong there. Maybe Tom has one.
I asked around and was told this is most likely the motherboard has not
decayed its DC rails. So it's quite possible that keeping it powered off
for a longer period of time before powering back on may help.
Thanks,
Tom
>
> Thanks,
>
> tglx
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
2020-07-29 18:29 ` Tom Lendacky
@ 2020-07-29 23:28 ` Scott Branden
0 siblings, 0 replies; 10+ messages in thread
From: Scott Branden @ 2020-07-29 23:28 UTC (permalink / raw)
To: Tom Lendacky, Thomas Gleixner, bp, x86, mingo; +Cc: linux-kernel
Hi Tom,
On 2020-07-29 11:29 a.m., Tom Lendacky wrote:
> On 7/29/20 4:50 AM, Thomas Gleixner wrote:
>> Scott,
>>
>> Scott Branden <scott.branden@broadcom.com> writes:
>>> On 2020-07-28 1:22 a.m., Thomas Gleixner wrote:
>>>> Scott Branden <scott.branden@broadcom.com> writes:
>>>>> Bios now updated to latest. Same kernel panic issue. Log below.
>>>>>
>>>>> I think it is related to power cycling quickly.
>>>>> Should APIC work if PC power cycled in a few seconds or is that the
>>>>> problem?
>>>> Yes, emphasis on should. Just to clarify, if you reboot it works and
>>>> cold start works as well if power was off long enough?
>>>>
>>> So far I have only been able to reproduce the issue by cold start with power off for only a few seconds
>>> before re-powering the system. It has not failed via reboot yet that I remember.
>>> Will have to keep my eye on whether using reboot is an issue or not.
>>> And also keeping power off longer when doing a cold start.
>> Weird.
>>
>>> Please find attached the failed console log with ignore_loglevel.
>> Aside of the differences caused by the BIOS update there is nothing
>> related to the APIC/IO-APIC setup which is different between the working
>> and failing boot.
>>
>> TBH, I have no idea what's going wrong there. Maybe Tom has one.
> I asked around and was told this is most likely the motherboard has not
> decayed its DC rails. So it's quite possible that keeping it powered off
> for a longer period of time before powering back on may help.
It does appear that the APIC hardware or some other component does not reset
something and assumes the power up value is 0.
Too bad proper voltage monitoring/full reset is not in place.
I was just reporting the issue as instructed by the kernel panic.
I think the issue is avoided by leaving the system powered off longer.
> Thanks,
> Tom
>
>> Thanks,
>>
>> tglx
>>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-07-29 23:28 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-27 18:39 Kernel panic - not syncing: IO-APIC + timer doesn't work! Scott Branden
2020-07-27 19:46 ` Andy Shevchenko
2020-07-27 20:51 ` Thomas Gleixner
2020-07-27 21:06 ` Scott Branden
2020-07-27 22:48 ` Scott Branden
2020-07-28 8:22 ` Thomas Gleixner
2020-07-28 17:30 ` Scott Branden
2020-07-29 9:50 ` Thomas Gleixner
2020-07-29 18:29 ` Tom Lendacky
2020-07-29 23:28 ` Scott Branden
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.