* VMX status report. Xen:25334 & Dom0:568b445...
@ 2012-05-21 3:05 Wu, GabrielX
2012-05-21 14:21 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 7+ messages in thread
From: Wu, GabrielX @ 2012-05-21 3:05 UTC (permalink / raw)
To: 'xen-devel@lists.xen.org'; +Cc: Ren, Yongjie, Liu, SongtaoX, Zhou, Chao
Hi all,
This is the test report of xen-unstable tree.
There are two issues found and one issue got fixed.
Version Info:
=================================================================
xen-changeset: 25334:f8279258e3c9
Dom0: linux.git 3.4.0-rc7+ (commit: 568b445...)
=================================================================
New issues(2)
==============
1. long stop during the guest boot process with qcow image
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1821
2. vcpu-set doesn't take effect on guest
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1822
Fixed issue(1)
==============
1. when detaching a VF from hvm guest, "xl dmesg" will show some warning information
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1809
Old issues(9)
==============
1. [ACPI] System cann't resume after do suspend
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1707
2. [XL]"xl vcpu-set" causes dom0 crash or panic
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1730
3. [VT-D]fail to detach NIC from guest
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1736
4. Sometimes Xen panic on ia32pae Sandybridge when restore guest
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1747
5. [VT-D] device reset fail when create/destroy guest
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1752
6. RHEL6.2/6.1 guest runs quite slow
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1811
7. after detaching a VF from a guest, shutdown the guest is very slow
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1812
8. cpu weight out of range error when create hvm domU
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1818
9. Poor performance when do guest save/restore and migration with linux 3.1 dom0
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1784
Thanks,
Wu Ronghui(Gabriel)
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: VMX status report. Xen:25334 & Dom0:568b445...
2012-05-21 3:05 VMX status report. Xen:25334 & Dom0:568b445 Wu, GabrielX
@ 2012-05-21 14:21 ` Konrad Rzeszutek Wilk
2012-05-22 7:19 ` Ren, Yongjie
0 siblings, 1 reply; 7+ messages in thread
From: Konrad Rzeszutek Wilk @ 2012-05-21 14:21 UTC (permalink / raw)
To: Wu, GabrielX
Cc: Ren, Yongjie, Liu, SongtaoX, Zhou, Chao,
'xen-devel@lists.xen.org'
On Mon, May 21, 2012 at 03:05:28AM +0000, Wu, GabrielX wrote:
> Hi all,
>
> This is the test report of xen-unstable tree.
> There are two issues found and one issue got fixed.
>
> Version Info:
> =================================================================
> xen-changeset: 25334:f8279258e3c9
> Dom0: linux.git 3.4.0-rc7+ (commit: 568b445...)
> =================================================================
>
> New issues(2)
> ==============
> 1. long stop during the guest boot process with qcow image
> http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1821
> 2. vcpu-set doesn't take effect on guest
> http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1822
Does it work if you (in the guest) do
echo 1 > /sys/../cpu9/online ?
There is a race in the generic hotplug code.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: VMX status report. Xen:25334 & Dom0:568b445...
2012-05-21 14:21 ` Konrad Rzeszutek Wilk
@ 2012-05-22 7:19 ` Ren, Yongjie
2012-05-22 8:32 ` Ian Campbell
0 siblings, 1 reply; 7+ messages in thread
From: Ren, Yongjie @ 2012-05-22 7:19 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, Wu, GabrielX
Cc: Liu, SongtaoX, Zhou, Chao, 'xen-devel@lists.xen.org'
> -----Original Message-----
> From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
> Sent: Monday, May 21, 2012 10:22 PM
> To: Wu, GabrielX
> Cc: 'xen-devel@lists.xen.org'; Ren, Yongjie; Liu, SongtaoX; Zhou, Chao
> Subject: Re: [Xen-devel] VMX status report. Xen:25334 & Dom0:568b445...
>
> On Mon, May 21, 2012 at 03:05:28AM +0000, Wu, GabrielX wrote:
> > Hi all,
> >
> > This is the test report of xen-unstable tree.
> > There are two issues found and one issue got fixed.
> >
> > Version Info:
> >
> ============================================================
> =====
> > xen-changeset: 25334:f8279258e3c9
> > Dom0: linux.git 3.4.0-rc7+ (commit: 568b445...)
> >
> ============================================================
> =====
> >
> > New issues(2)
> > ==============
> > 1. long stop during the guest boot process with qcow image
> > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1821
> > 2. vcpu-set doesn't take effect on guest
> > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1822
>
> Does it work if you (in the guest) do
> echo 1 > /sys/../cpu9/online ?
>
The problem is there's no hot-add vCPU in /sys/devices/system/cpu directory.
e.g. I start a guest with 2 vCPU, then I run command 'xl vcpu-set $domID 4'.
There are only 2 CPUs(cpu0 and cpu1) listed in /sys/devices/system/cpu directory.
> There is a race in the generic hotplug code.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: VMX status report. Xen:25334 & Dom0:568b445...
2012-05-22 7:19 ` Ren, Yongjie
@ 2012-05-22 8:32 ` Ian Campbell
2012-05-23 8:21 ` Ren, Yongjie
0 siblings, 1 reply; 7+ messages in thread
From: Ian Campbell @ 2012-05-22 8:32 UTC (permalink / raw)
To: Ren, Yongjie
Cc: Liu, SongtaoX, 'xen-devel@lists.xen.org',
Wu, GabrielX, Zhou, Chao, Konrad Rzeszutek Wilk
On Tue, 2012-05-22 at 08:19 +0100, Ren, Yongjie wrote:
> > -----Original Message-----
> > From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
> > Sent: Monday, May 21, 2012 10:22 PM
> > To: Wu, GabrielX
> > Cc: 'xen-devel@lists.xen.org'; Ren, Yongjie; Liu, SongtaoX; Zhou, Chao
> > Subject: Re: [Xen-devel] VMX status report. Xen:25334 & Dom0:568b445...
> >
> > On Mon, May 21, 2012 at 03:05:28AM +0000, Wu, GabrielX wrote:
> > > Hi all,
> > >
> > > This is the test report of xen-unstable tree.
> > > There are two issues found and one issue got fixed.
> > >
> > > Version Info:
> > >
> > ============================================================
> > =====
> > > xen-changeset: 25334:f8279258e3c9
> > > Dom0: linux.git 3.4.0-rc7+ (commit: 568b445...)
> > >
> > ============================================================
> > =====
> > >
> > > New issues(2)
> > > ==============
> > > 1. long stop during the guest boot process with qcow image
> > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1821
> > > 2. vcpu-set doesn't take effect on guest
> > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1822
> >
> > Does it work if you (in the guest) do
> > echo 1 > /sys/../cpu9/online ?
> >
> The problem is there's no hot-add vCPU in /sys/devices/system/cpu directory.
> e.g. I start a guest with 2 vCPU,
Do you mean with maxvcpu=4 vcpus=2 in your config?
> then I run command 'xl vcpu-set $domID 4'.
> There are only 2 CPUs(cpu0 and cpu1) listed in /sys/devices/system/cpu directory.
The bugzilla says "But it'll effect to dom0.", does this mean that
xl vcpu-set domU 4
will actually set dom0 to 12 vcpus? Or does it just mean that
xl vcpu-set 0 4
works where
xl vcpu-set domU 4
does not?
There's quite a bit of potentially useful info missing from the bug
report, like guest config details, xenstore content etc,
http://wiki.xen.org/wiki/Reporting_Bugs_against_Xen has a list of
various log files which are often useful to help solve bugs, please do
consider including those which seem relevant on future bug reports.
Ian.
>
> > There is a race in the generic hotplug code.
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: VMX status report. Xen:25334 & Dom0:568b445...
2012-05-22 8:32 ` Ian Campbell
@ 2012-05-23 8:21 ` Ren, Yongjie
2012-05-23 15:44 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 7+ messages in thread
From: Ren, Yongjie @ 2012-05-23 8:21 UTC (permalink / raw)
To: Ian Campbell
Cc: Liu, SongtaoX, 'xen-devel@lists.xen.org',
Wu, GabrielX, Zhou, Chao, Konrad Rzeszutek Wilk
> -----Original Message-----
> From: Ian Campbell [mailto:Ian.Campbell@citrix.com]
> Sent: Tuesday, May 22, 2012 4:32 PM
> To: Ren, Yongjie
> Cc: Konrad Rzeszutek Wilk; Wu, GabrielX; Liu, SongtaoX; Zhou, Chao;
> 'xen-devel@lists.xen.org'
> Subject: Re: [Xen-devel] VMX status report. Xen:25334 & Dom0:568b445...
>
> On Tue, 2012-05-22 at 08:19 +0100, Ren, Yongjie wrote:
> > > -----Original Message-----
> > > From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
> > > Sent: Monday, May 21, 2012 10:22 PM
> > > To: Wu, GabrielX
> > > Cc: 'xen-devel@lists.xen.org'; Ren, Yongjie; Liu, SongtaoX; Zhou, Chao
> > > Subject: Re: [Xen-devel] VMX status report. Xen:25334 &
> Dom0:568b445...
> > >
> > > On Mon, May 21, 2012 at 03:05:28AM +0000, Wu, GabrielX wrote:
> > > > Hi all,
> > > >
> > > > This is the test report of xen-unstable tree.
> > > > There are two issues found and one issue got fixed.
> > > >
> > > > Version Info:
> > > >
> > >
> ============================================================
> > > =====
> > > > xen-changeset: 25334:f8279258e3c9
> > > > Dom0: linux.git 3.4.0-rc7+ (commit: 568b445...)
> > > >
> > >
> ============================================================
> > > =====
> > > >
> > > > New issues(2)
> > > > ==============
> > > > 1. long stop during the guest boot process with qcow image
> > > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1821
> > > > 2. vcpu-set doesn't take effect on guest
> > > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1822
> > >
> > > Does it work if you (in the guest) do
> > > echo 1 > /sys/../cpu9/online ?
> > >
> > The problem is there's no hot-add vCPU in /sys/devices/system/cpu
> directory.
> > e.g. I start a guest with 2 vCPU,
>
> Do you mean with maxvcpu=4 vcpus=2 in your config?
>
> > then I run command 'xl vcpu-set $domID 4'.
>
> > There are only 2 CPUs(cpu0 and cpu1) listed in
> /sys/devices/system/cpu directory.
>
> The bugzilla says "But it'll effect to dom0.", does this mean that
> xl vcpu-set domU 4
> will actually set dom0 to 12 vcpus? Or does it just mean that
> xl vcpu-set 0 4
> works where
> xl vcpu-set domU 4
> does not?
>
'xl vcpu-set 0 4' works well for dom0 in some circumstances.
'xl vcpu-set domU 4' doesn't work for dumU at all.
'xl vcpu-set' for dom0 also has a bug.
You can use 'xl vcpu-set' command to decrease vCPU number for dom0;
but when you try to increase its number you might meet dom0 panic.
Please look at my comment #2 in the following BZ.
http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1730
> There's quite a bit of potentially useful info missing from the bug
> report, like guest config details, xenstore content etc,
> http://wiki.xen.org/wiki/Reporting_Bugs_against_Xen has a list of
> various log files which are often useful to help solve bugs, please do
> consider including those which seem relevant on future bug reports.
>
Thanks for your advice. We'll pay more attention to this.
-Jay
> Ian.
>
> >
> > > There is a race in the generic hotplug code.
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xen.org
> > http://lists.xen.org/xen-devel
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: VMX status report. Xen:25334 & Dom0:568b445...
2012-05-23 8:21 ` Ren, Yongjie
@ 2012-05-23 15:44 ` Konrad Rzeszutek Wilk
2012-05-24 7:35 ` Ren, Yongjie
0 siblings, 1 reply; 7+ messages in thread
From: Konrad Rzeszutek Wilk @ 2012-05-23 15:44 UTC (permalink / raw)
To: Ren, Yongjie
Cc: Liu, SongtaoX, 'xen-devel@lists.xen.org',
Wu, GabrielX, Ian Campbell, Zhou, Chao
On Wed, May 23, 2012 at 08:21:24AM +0000, Ren, Yongjie wrote:
> > -----Original Message-----
> > From: Ian Campbell [mailto:Ian.Campbell@citrix.com]
> > Sent: Tuesday, May 22, 2012 4:32 PM
> > To: Ren, Yongjie
> > Cc: Konrad Rzeszutek Wilk; Wu, GabrielX; Liu, SongtaoX; Zhou, Chao;
> > 'xen-devel@lists.xen.org'
> > Subject: Re: [Xen-devel] VMX status report. Xen:25334 & Dom0:568b445...
> >
> > On Tue, 2012-05-22 at 08:19 +0100, Ren, Yongjie wrote:
> > > > -----Original Message-----
> > > > From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
> > > > Sent: Monday, May 21, 2012 10:22 PM
> > > > To: Wu, GabrielX
> > > > Cc: 'xen-devel@lists.xen.org'; Ren, Yongjie; Liu, SongtaoX; Zhou, Chao
> > > > Subject: Re: [Xen-devel] VMX status report. Xen:25334 &
> > Dom0:568b445...
> > > >
> > > > On Mon, May 21, 2012 at 03:05:28AM +0000, Wu, GabrielX wrote:
> > > > > Hi all,
> > > > >
> > > > > This is the test report of xen-unstable tree.
> > > > > There are two issues found and one issue got fixed.
> > > > >
> > > > > Version Info:
> > > > >
> > > >
> > ============================================================
> > > > =====
> > > > > xen-changeset: 25334:f8279258e3c9
> > > > > Dom0: linux.git 3.4.0-rc7+ (commit: 568b445...)
> > > > >
> > > >
> > ============================================================
> > > > =====
> > > > >
> > > > > New issues(2)
> > > > > ==============
> > > > > 1. long stop during the guest boot process with qcow image
> > > > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1821
> > > > > 2. vcpu-set doesn't take effect on guest
> > > > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1822
> > > >
> > > > Does it work if you (in the guest) do
> > > > echo 1 > /sys/../cpu9/online ?
> > > >
> > > The problem is there's no hot-add vCPU in /sys/devices/system/cpu
> > directory.
> > > e.g. I start a guest with 2 vCPU,
> >
> > Do you mean with maxvcpu=4 vcpus=2 in your config?
> >
> > > then I run command 'xl vcpu-set $domID 4'.
> >
> > > There are only 2 CPUs(cpu0 and cpu1) listed in
> > /sys/devices/system/cpu directory.
> >
> > The bugzilla says "But it'll effect to dom0.", does this mean that
> > xl vcpu-set domU 4
> > will actually set dom0 to 12 vcpus? Or does it just mean that
> > xl vcpu-set 0 4
> > works where
> > xl vcpu-set domU 4
> > does not?
> >
> 'xl vcpu-set 0 4' works well for dom0 in some circumstances.
> 'xl vcpu-set domU 4' doesn't work for dumU at all.
>
> 'xl vcpu-set' for dom0 also has a bug.
> You can use 'xl vcpu-set' command to decrease vCPU number for dom0;
> but when you try to increase its number you might meet dom0 panic.
> Please look at my comment #2 in the following BZ.
> http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1730
That should have been fixed in 3.4 by cf405ae612b0f7e2358db7ff594c0e94846137aa
"xen/smp: Fix crash when booting with ACPI hotplug CPUs."
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: VMX status report. Xen:25334 & Dom0:568b445...
2012-05-23 15:44 ` Konrad Rzeszutek Wilk
@ 2012-05-24 7:35 ` Ren, Yongjie
0 siblings, 0 replies; 7+ messages in thread
From: Ren, Yongjie @ 2012-05-24 7:35 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: Liu, SongtaoX, 'xen-devel@lists.xen.org',
Wu, GabrielX, Ian Campbell, Zhou, Chao
> -----Original Message-----
> From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
> Sent: Wednesday, May 23, 2012 11:44 PM
> To: Ren, Yongjie
> Cc: Ian Campbell; Wu, GabrielX; Liu, SongtaoX; Zhou, Chao;
> 'xen-devel@lists.xen.org'
> Subject: Re: [Xen-devel] VMX status report. Xen:25334 & Dom0:568b445...
>
> On Wed, May 23, 2012 at 08:21:24AM +0000, Ren, Yongjie wrote:
> > > -----Original Message-----
> > > From: Ian Campbell [mailto:Ian.Campbell@citrix.com]
> > > Sent: Tuesday, May 22, 2012 4:32 PM
> > > To: Ren, Yongjie
> > > Cc: Konrad Rzeszutek Wilk; Wu, GabrielX; Liu, SongtaoX; Zhou, Chao;
> > > 'xen-devel@lists.xen.org'
> > > Subject: Re: [Xen-devel] VMX status report. Xen:25334 &
> Dom0:568b445...
> > >
> > > On Tue, 2012-05-22 at 08:19 +0100, Ren, Yongjie wrote:
> > > > > -----Original Message-----
> > > > > From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
> > > > > Sent: Monday, May 21, 2012 10:22 PM
> > > > > To: Wu, GabrielX
> > > > > Cc: 'xen-devel@lists.xen.org'; Ren, Yongjie; Liu, SongtaoX; Zhou,
> Chao
> > > > > Subject: Re: [Xen-devel] VMX status report. Xen:25334 &
> > > Dom0:568b445...
> > > > >
> > > > > On Mon, May 21, 2012 at 03:05:28AM +0000, Wu, GabrielX wrote:
> > > > > > Hi all,
> > > > > >
> > > > > > This is the test report of xen-unstable tree.
> > > > > > There are two issues found and one issue got fixed.
> > > > > >
> > > > > > Version Info:
> > > > > >
> > > > >
> > >
> ============================================================
> > > > > =====
> > > > > > xen-changeset: 25334:f8279258e3c9
> > > > > > Dom0: linux.git 3.4.0-rc7+ (commit: 568b445...)
> > > > > >
> > > > >
> > >
> ============================================================
> > > > > =====
> > > > > >
> > > > > > New issues(2)
> > > > > > ==============
> > > > > > 1. long stop during the guest boot process with qcow image
> > > > > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1821
> > > > > > 2. vcpu-set doesn't take effect on guest
> > > > > > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1822
> > > > >
> > > > > Does it work if you (in the guest) do
> > > > > echo 1 > /sys/../cpu9/online ?
> > > > >
> > > > The problem is there's no hot-add vCPU in /sys/devices/system/cpu
> > > directory.
> > > > e.g. I start a guest with 2 vCPU,
> > >
> > > Do you mean with maxvcpu=4 vcpus=2 in your config?
> > >
> > > > then I run command 'xl vcpu-set $domID 4'.
> > >
> > > > There are only 2 CPUs(cpu0 and cpu1) listed in
> > > /sys/devices/system/cpu directory.
> > >
> > > The bugzilla says "But it'll effect to dom0.", does this mean that
> > > xl vcpu-set domU 4
> > > will actually set dom0 to 12 vcpus? Or does it just mean that
> > > xl vcpu-set 0 4
> > > works where
> > > xl vcpu-set domU 4
> > > does not?
> > >
> > 'xl vcpu-set 0 4' works well for dom0 in some circumstances.
> > 'xl vcpu-set domU 4' doesn't work for dumU at all.
> >
> > 'xl vcpu-set' for dom0 also has a bug.
> > You can use 'xl vcpu-set' command to decrease vCPU number for dom0;
> > but when you try to increase its number you might meet dom0 panic.
> > Please look at my comment #2 in the following BZ.
> > http://bugzilla.xen.org/bugzilla/show_bug.cgi?id=1730
>
> That should have been fixed in 3.4 by
> cf405ae612b0f7e2358db7ff594c0e94846137aa
> "xen/smp: Fix crash when booting with ACPI hotplug CPUs."
No, not yet. We tested against latest linux.git (already including that commit) as dom0,
but found that bug #1730 still exist.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-05-24 7:35 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-21 3:05 VMX status report. Xen:25334 & Dom0:568b445 Wu, GabrielX
2012-05-21 14:21 ` Konrad Rzeszutek Wilk
2012-05-22 7:19 ` Ren, Yongjie
2012-05-22 8:32 ` Ian Campbell
2012-05-23 8:21 ` Ren, Yongjie
2012-05-23 15:44 ` Konrad Rzeszutek Wilk
2012-05-24 7:35 ` Ren, Yongjie
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.