* [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 6:01 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 6:01 UTC (permalink / raw) To: kvm-ppc, qemu-devel, Alexander Graf |Hello, I was able to boot a Linux kernel (uImage) with an initrd in a virtual P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the following command. qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd /home/christian/Downloads/slitaz25.gz -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" It also works with the machine 'MPC8544DS': qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd /home/christian/Downloads/slitaz25.gz -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the option '-drive' but without any success. Is it possible to boot from a hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual graphics card with this machine? Have a nice weekend! :-) Thanks, Christian | ^ permalink raw reply [flat|nested] 35+ messages in thread
* [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 6:01 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 6:01 UTC (permalink / raw) To: kvm-ppc, qemu-devel, Alexander Graf |Hello, I was able to boot a Linux kernel (uImage) with an initrd in a virtual P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the following command. qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd /home/christian/Downloads/slitaz25.gz -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -net nic,vlan=0,modelá000 -net user,vlan=0 -machine dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" It also works with the machine 'MPC8544DS': qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd /home/christian/Downloads/slitaz25.gz -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -net nic,vlan=0,modelá000 -net user,vlan=0 -machine dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the option '-drive' but without any success. Is it possible to boot from a hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual graphics card with this machine? Have a nice weekend! :-) Thanks, Christian | ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 6:01 ` Christian Zigotzky @ 2018-05-18 8:54 ` Thomas Huth -1 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-18 8:54 UTC (permalink / raw) To: Christian Zigotzky, kvm-ppc, qemu-devel, Alexander Graf On 18.05.2018 08:01, Christian Zigotzky wrote: > |Hello, > > I was able to boot a Linux kernel (uImage) with an initrd in a virtual > P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the > following command. > > qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd > /home/christian/Downloads/slitaz25.gz -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine > dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" > > It also works with the machine 'MPC8544DS': > > qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd > /home/christian/Downloads/slitaz25.gz -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine > dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" These two machines ppce500 and mpc8544ds are "embedded" PowerPC machines... > I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the > option '-drive' but without any success. Is it possible to boot from a > hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual > graphics card with this machine? ... but according to http://cdimage.ubuntu.com/releases/16.04/release/ Ubuntu 16.04 is for Apple and IBM machines only, so I don't think that you'll be able to run this on an embedded PPC machine? Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 8:54 ` Thomas Huth 0 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-18 8:54 UTC (permalink / raw) To: Christian Zigotzky, kvm-ppc, qemu-devel, Alexander Graf On 18.05.2018 08:01, Christian Zigotzky wrote: > |Hello, > > I was able to boot a Linux kernel (uImage) with an initrd in a virtual > P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the > following command. > > qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd > /home/christian/Downloads/slitaz25.gz -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -net nic,vlan=0,modelá000 -net user,vlan=0 -machine > dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" > > It also works with the machine 'MPC8544DS': > > qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd > /home/christian/Downloads/slitaz25.gz -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -net nic,vlan=0,modelá000 -net user,vlan=0 -machine > dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" These two machines ppce500 and mpc8544ds are "embedded" PowerPC machines... > I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the > option '-drive' but without any success. Is it possible to boot from a > hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual > graphics card with this machine? ... but according to http://cdimage.ubuntu.com/releases/16.04/release/ Ubuntu 16.04 is for Apple and IBM machines only, so I don't think that you'll be able to run this on an embedded PPC machine? Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 8:54 ` Thomas Huth (?) @ 2018-05-18 9:06 ` Christian Zigotzky 2018-05-18 9:24 ` Thomas Huth -1 siblings, 1 reply; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 9:06 UTC (permalink / raw) To: Thomas Huth; +Cc: kvm-ppc, qemu-devel, Alexander Graf It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). Screenshots: https://plus.google.com/115515624056477014971 — Christian Sent from my iPhone > On 18. May 2018, at 10:54, Thomas Huth <huth@tuxfamily.org> wrote: > >> On 18.05.2018 08:01, Christian Zigotzky wrote: >> Hello, >> >> I was able to boot a Linux kernel (uImage) with an initrd in a virtual >> P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the >> following command. >> >> qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd >> /home/christian/Downloads/slitaz25.gz -nographic -kernel >> /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 >> -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine >> dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" >> >> It also works with the machine 'MPC8544DS': >> >> qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd >> /home/christian/Downloads/slitaz25.gz -nographic -kernel >> /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 >> -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine >> dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" > > These two machines ppce500 and mpc8544ds are "embedded" PowerPC machines... > >> I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the >> option '-drive' but without any success. Is it possible to boot from a >> hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual >> graphics card with this machine? > > ... but according to http://cdimage.ubuntu.com/releases/16.04/release/ > Ubuntu 16.04 is for Apple and IBM machines only, so I don't think that > you'll be able to run this on an embedded PPC machine? > > Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 9:06 ` Christian Zigotzky @ 2018-05-18 9:24 ` Thomas Huth 0 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-18 9:24 UTC (permalink / raw) To: Christian Zigotzky; +Cc: qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18.05.2018 11:06, Christian Zigotzky wrote: > It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). > > Screenshots: https://plus.google.com/115515624056477014971 Interesting ... but you still use your own kernel, and not the stock Ubuntu kernel, right? That would explain how this can work... Anyway, having a quick look at the sources, it seems to me that the ppce500 / mpc8544ds machines in QEMU do not support any mass storage controllor by default, so you got to specify the interface type. For example: -drive if=virtio,file=... or: -device virtio-scsi -drive if=none,id=c1,file=... \ -device scsi-cd,drive=c1 Same for the graphics card, there does not seem to be support for a default here, so try to specify it like this: -device VGA or: -device virtio-vga HTH, Thomas > — Christian > > Sent from my iPhone > >> On 18. May 2018, at 10:54, Thomas Huth <huth@tuxfamily.org> wrote: >> >>> On 18.05.2018 08:01, Christian Zigotzky wrote: >>> Hello, >>> >>> I was able to boot a Linux kernel (uImage) with an initrd in a virtual >>> P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the >>> following command. >>> >>> qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd >>> /home/christian/Downloads/slitaz25.gz -nographic -kernel >>> /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 >>> -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine >>> dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" >>> >>> It also works with the machine 'MPC8544DS': >>> >>> qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd >>> /home/christian/Downloads/slitaz25.gz -nographic -kernel >>> /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 >>> -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine >>> dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" >> >> These two machines ppce500 and mpc8544ds are "embedded" PowerPC machines... >> >>> I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the >>> option '-drive' but without any success. Is it possible to boot from a >>> hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual >>> graphics card with this machine? >> >> ... but according to http://cdimage.ubuntu.com/releases/16.04/release/ >> Ubuntu 16.04 is for Apple and IBM machines only, so I don't think that >> you'll be able to run this on an embedded PPC machine? >> >> Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 9:24 ` Thomas Huth 0 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-18 9:24 UTC (permalink / raw) To: Christian Zigotzky; +Cc: qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18.05.2018 11:06, Christian Zigotzky wrote: > It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). > > Screenshots: https://plus.google.com/115515624056477014971 Interesting ... but you still use your own kernel, and not the stock Ubuntu kernel, right? That would explain how this can work... Anyway, having a quick look at the sources, it seems to me that the ppce500 / mpc8544ds machines in QEMU do not support any mass storage controllor by default, so you got to specify the interface type. For example: -drive if=virtio,file=... or: -device virtio-scsi -drive if=none,idÁ,file=... \ -device scsi-cd,driveÁ Same for the graphics card, there does not seem to be support for a default here, so try to specify it like this: -device VGA or: -device virtio-vga HTH, Thomas > — Christian > > Sent from my iPhone > >> On 18. May 2018, at 10:54, Thomas Huth <huth@tuxfamily.org> wrote: >> >>> On 18.05.2018 08:01, Christian Zigotzky wrote: >>> Hello, >>> >>> I was able to boot a Linux kernel (uImage) with an initrd in a virtual >>> P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the >>> following command. >>> >>> qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd >>> /home/christian/Downloads/slitaz25.gz -nographic -kernel >>> /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 >>> -net nic,vlan=0,modelá000 -net user,vlan=0 -machine >>> dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" >>> >>> It also works with the machine 'MPC8544DS': >>> >>> qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd >>> /home/christian/Downloads/slitaz25.gz -nographic -kernel >>> /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 >>> -net nic,vlan=0,modelá000 -net user,vlan=0 -machine >>> dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" >> >> These two machines ppce500 and mpc8544ds are "embedded" PowerPC machines... >> >>> I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the >>> option '-drive' but without any success. Is it possible to boot from a >>> hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual >>> graphics card with this machine? >> >> ... but according to http://cdimage.ubuntu.com/releases/16.04/release/ >> Ubuntu 16.04 is for Apple and IBM machines only, so I don't think that >> you'll be able to run this on an embedded PPC machine? >> >> Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 9:24 ` Thomas Huth @ 2018-05-18 10:30 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 10:30 UTC (permalink / raw) To: Thomas Huth; +Cc: qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18 May 2018 at 11:24PM, Thomas Huth wrote: > On 18.05.2018 11:06, Christian Zigotzky wrote: >> It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). >> >> Screenshots: https://plus.google.com/115515624056477014971 > Interesting ... but you still use your own kernel, and not the stock > Ubuntu kernel, right? That would explain how this can work... > > Anyway, having a quick look at the sources, it seems to me that the > ppce500 / mpc8544ds machines in QEMU do not support any mass storage > controllor by default, so you got to specify the interface type. > > For example: > > -drive if=virtio,file=... > > or: > > -device virtio-scsi -drive if=none,id=c1,file=... \ > -device scsi-cd,drive=c1 > > Same for the graphics card, there does not seem to be support for a > default here, so try to specify it like this: > > -device VGA > > or: > > -device virtio-vga > > HTH, > Thomas > Hello Thomas, Thanks for your reply. ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -drive if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -append "root=/dev/sda3" Output: [ 0.880961] VFS: Cannot open root device "sda3" or unknown-block(0,0): error -6 [ 0.881150] Please append a correct "root=" boot option; here are the available partitions: [ 0.881446] 0100 131072 ram0 [ 0.881478] (driver?) [ 0.881709] 0101 131072 ram1 [ 0.881715] (driver?) [ 0.881875] 0102 131072 ram2 [ 0.881879] (driver?) [ 0.882033] 0103 131072 ram3 [ 0.882037] (driver?) [ 0.882189] 0104 131072 ram4 [ 0.882193] (driver?) [ 0.882347] 0105 131072 ram5 [ 0.882350] (driver?) [ 0.882503] 0106 131072 ram6 [ 0.882507] (driver?) [ 0.882700] 0107 131072 ram7 [ 0.882705] (driver?) [ 0.882862] 0108 131072 ram8 [ 0.882866] (driver?) [ 0.883018] 0109 131072 ram9 [ 0.883021] (driver?) [ 0.883174] 010a 131072 ram10 [ 0.883178] (driver?) [ 0.883330] 010b 131072 ram11 [ 0.883333] (driver?) [ 0.883487] 010c 131072 ram12 [ 0.883490] (driver?) [ 0.883694] 010d 131072 ram13 [ 0.883699] (driver?) [ 0.883858] 010e 131072 ram14 [ 0.883863] (driver?) [ 0.884020] 010f 131072 ram15 [ 0.884024] (driver?) [ 0.884265] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.884883] Rebooting in 180 seconds.. ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -device scsi-cd,drive=c1 -append "root=/dev/sda3" Unfortunately without any success. (same errors like before) Boot with U-Boot: ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -bios /home/christian/Downloads/u-boot -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -device scsi-cd,drive=c1 Output: U-Boot 2017.09-00322-g1f6049e (Sep 25 2017 - 20:50:48 +0200) CPU: Unknown, Version: 0.0, (0x00000000) Core: e5500, Version: 2.0, (0x80240020) Clock Configuration: CPU0:400 MHz, CCB:400 MHz, DDR:200 MHz (400 MT/s data rate), LBC: unknown (LCRR[CLKDIV] = 0x00) L1: D-cache 32 KiB enabled I-cache 32 KiB enabled DRAM: 2 GiB L2: disabled Using default environment PCI: base address e0008000 00:01.0 - 1af4:1000 - Network controller 00:02.0 - 1af4:1004 - Mass storage controller PCI1: Bus 00 - 00 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 => Any other hints? Thanks, Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 10:30 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 10:30 UTC (permalink / raw) To: Thomas Huth; +Cc: qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18 May 2018 at 11:24PM, Thomas Huth wrote: > On 18.05.2018 11:06, Christian Zigotzky wrote: >> It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). >> >> Screenshots: https://plus.google.com/115515624056477014971 > Interesting ... but you still use your own kernel, and not the stock > Ubuntu kernel, right? That would explain how this can work... > > Anyway, having a quick look at the sources, it seems to me that the > ppce500 / mpc8544ds machines in QEMU do not support any mass storage > controllor by default, so you got to specify the interface type. > > For example: > > -drive if=virtio,file=... > > or: > > -device virtio-scsi -drive if=none,idÁ,file=... \ > -device scsi-cd,driveÁ > > Same for the graphics card, there does not seem to be support for a > default here, so try to specify it like this: > > -device VGA > > or: > > -device virtio-vga > > HTH, > Thomas > Hello Thomas, Thanks for your reply. ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -drive if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -append "root=/dev/sda3" Output: [   0.880961] VFS: Cannot open root device "sda3" or unknown-block(0,0): error -6 [   0.881150] Please append a correct "root=" boot option; here are the available partitions: [   0.881446] 0100         131072 ram0 [   0.881478] (driver?) [   0.881709] 0101         131072 ram1 [   0.881715] (driver?) [   0.881875] 0102         131072 ram2 [   0.881879] (driver?) [   0.882033] 0103         131072 ram3 [   0.882037] (driver?) [   0.882189] 0104         131072 ram4 [   0.882193] (driver?) [   0.882347] 0105         131072 ram5 [   0.882350] (driver?) [   0.882503] 0106         131072 ram6 [   0.882507] (driver?) [   0.882700] 0107         131072 ram7 [   0.882705] (driver?) [   0.882862] 0108         131072 ram8 [   0.882866] (driver?) [   0.883018] 0109         131072 ram9 [   0.883021] (driver?) [   0.883174] 010a         131072 ram10 [   0.883178] (driver?) [   0.883330] 010b         131072 ram11 [   0.883333] (driver?) [   0.883487] 010c         131072 ram12 [   0.883490] (driver?) [   0.883694] 010d         131072 ram13 [   0.883699] (driver?) [   0.883858] 010e         131072 ram14 [   0.883863] (driver?) [   0.884020] 010f         131072 ram15 [   0.884024] (driver?) [   0.884265] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [   0.884883] Rebooting in 180 seconds.. ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -device scsi-cd,driveÁ -append "root=/dev/sda3" Unfortunately without any success. (same errors like before) Boot with U-Boot: ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -bios /home/christian/Downloads/u-boot -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -device scsi-cd,driveÁ Output: U-Boot 2017.09-00322-g1f6049e (Sep 25 2017 - 20:50:48 +0200) CPU:  Unknown, Version: 0.0, (0x00000000) Core: e5500, Version: 2.0, (0x80240020) Clock Configuration:       CPU0:400 MHz,       CCB:400 MHz,       DDR:200 MHz (400 MT/s data rate), LBC: unknown (LCRR[CLKDIV] = 0x00) L1:   D-cache 32 KiB enabled       I-cache 32 KiB enabled DRAM: 2 GiB L2:   disabled Using default environment PCI: base address e0008000  00:01.0    - 1af4:1000 - Network controller  00:02.0    - 1af4:1004 - Mass storage controller PCI1: Bus 00 - 00 In:   serial Out:  serial Err:  serial Net:  No ethernet found. Hit any key to stop autoboot: 0 => Any other hints? Thanks, Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 10:30 ` Christian Zigotzky @ 2018-05-18 11:13 ` Greg Kurz -1 siblings, 0 replies; 35+ messages in thread From: Greg Kurz @ 2018-05-18 11:13 UTC (permalink / raw) To: Christian Zigotzky Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On Fri, 18 May 2018 12:30:44 +0200 Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > On 18 May 2018 at 11:24PM, Thomas Huth wrote: > > On 18.05.2018 11:06, Christian Zigotzky wrote: > >> It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). > >> > >> Screenshots: https://plus.google.com/115515624056477014971 > > Interesting ... but you still use your own kernel, and not the stock > > Ubuntu kernel, right? That would explain how this can work... > > > > Anyway, having a quick look at the sources, it seems to me that the > > ppce500 / mpc8544ds machines in QEMU do not support any mass storage > > controllor by default, so you got to specify the interface type. > > > > For example: > > > > -drive if=virtio,file=... > > > > or: > > > > -device virtio-scsi -drive if=none,id=c1,file=... \ > > -device scsi-cd,drive=c1 > > > > Same for the graphics card, there does not seem to be support for a > > default here, so try to specify it like this: > > > > -device VGA > > > > or: > > > > -device virtio-vga > > > > HTH, > > Thomas > > > Hello Thomas, > > Thanks for your reply. > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -drive > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -append "root=/dev/sda3" > > Output: > > [ 0.880961] VFS: Cannot open root device "sda3" or > unknown-block(0,0): error -6 if=virtio translates to -device virtio-blk-pci AFAIK, in which case you should pass "root=/dev/vda3". And of course your kernel should be built with virtio support. > [ 0.881150] Please append a correct "root=" boot option; here are the > available partitions: > [ 0.881446] 0100 131072 ram0 > [ 0.881478] (driver?) > [ 0.881709] 0101 131072 ram1 > [ 0.881715] (driver?) > [ 0.881875] 0102 131072 ram2 > [ 0.881879] (driver?) > [ 0.882033] 0103 131072 ram3 > [ 0.882037] (driver?) > [ 0.882189] 0104 131072 ram4 > [ 0.882193] (driver?) > [ 0.882347] 0105 131072 ram5 > [ 0.882350] (driver?) > [ 0.882503] 0106 131072 ram6 > [ 0.882507] (driver?) > [ 0.882700] 0107 131072 ram7 > [ 0.882705] (driver?) > [ 0.882862] 0108 131072 ram8 > [ 0.882866] (driver?) > [ 0.883018] 0109 131072 ram9 > [ 0.883021] (driver?) > [ 0.883174] 010a 131072 ram10 > [ 0.883178] (driver?) > [ 0.883330] 010b 131072 ram11 > [ 0.883333] (driver?) > [ 0.883487] 010c 131072 ram12 > [ 0.883490] (driver?) > [ 0.883694] 010d 131072 ram13 > [ 0.883699] (driver?) > [ 0.883858] 010e 131072 ram14 > [ 0.883863] (driver?) > [ 0.884020] 010f 131072 ram15 > [ 0.884024] (driver?) > [ 0.884265] Kernel panic - not syncing: VFS: Unable to mount root fs > on unknown-block(0,0) > [ 0.884883] Rebooting in 180 seconds.. > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,drive=c1 -append "root=/dev/sda3" > > Unfortunately without any success. (same errors like before) > > Boot with U-Boot: > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -bios > /home/christian/Downloads/u-boot -machine dt_compatible=fsl,,P5020DS > -device virtio-scsi -drive > if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,drive=c1 > > Output: > > U-Boot 2017.09-00322-g1f6049e (Sep 25 2017 - 20:50:48 +0200) > > CPU: Unknown, Version: 0.0, (0x00000000) > Core: e5500, Version: 2.0, (0x80240020) > Clock Configuration: > CPU0:400 MHz, > CCB:400 MHz, > DDR:200 MHz (400 MT/s data rate), LBC: unknown (LCRR[CLKDIV] = > 0x00) > L1: D-cache 32 KiB enabled > I-cache 32 KiB enabled > DRAM: 2 GiB > L2: disabled > Using default environment > > > PCI: base address e0008000 > 00:01.0 - 1af4:1000 - Network controller > 00:02.0 - 1af4:1004 - Mass storage controller > PCI1: Bus 00 - 00 > > In: serial > Out: serial > Err: serial > Net: No ethernet found. > Hit any key to stop autoboot: 0 > => > > Any other hints? > > Thanks, > Christian > > > > -- > To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 11:13 ` Greg Kurz 0 siblings, 0 replies; 35+ messages in thread From: Greg Kurz @ 2018-05-18 11:13 UTC (permalink / raw) To: Christian Zigotzky Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On Fri, 18 May 2018 12:30:44 +0200 Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > On 18 May 2018 at 11:24PM, Thomas Huth wrote: > > On 18.05.2018 11:06, Christian Zigotzky wrote: > >> It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). > >> > >> Screenshots: https://plus.google.com/115515624056477014971 > > Interesting ... but you still use your own kernel, and not the stock > > Ubuntu kernel, right? That would explain how this can work... > > > > Anyway, having a quick look at the sources, it seems to me that the > > ppce500 / mpc8544ds machines in QEMU do not support any mass storage > > controllor by default, so you got to specify the interface type. > > > > For example: > > > > -drive if=virtio,file=... > > > > or: > > > > -device virtio-scsi -drive if=none,idÁ,file=... \ > > -device scsi-cd,driveÁ > > > > Same for the graphics card, there does not seem to be support for a > > default here, so try to specify it like this: > > > > -device VGA > > > > or: > > > > -device virtio-vga > > > > HTH, > > Thomas > > > Hello Thomas, > > Thanks for your reply. > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -drive > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -append "root=/dev/sda3" > > Output: > > [   0.880961] VFS: Cannot open root device "sda3" or > unknown-block(0,0): error -6 if=virtio translates to -device virtio-blk-pci AFAIK, in which case you should pass "root=/dev/vda3". And of course your kernel should be built with virtio support. > [   0.881150] Please append a correct "root=" boot option; here are the > available partitions: > [   0.881446] 0100         131072 ram0 > [   0.881478] (driver?) > [   0.881709] 0101         131072 ram1 > [   0.881715] (driver?) > [   0.881875] 0102         131072 ram2 > [   0.881879] (driver?) > [   0.882033] 0103         131072 ram3 > [   0.882037] (driver?) > [   0.882189] 0104         131072 ram4 > [   0.882193] (driver?) > [   0.882347] 0105         131072 ram5 > [   0.882350] (driver?) > [   0.882503] 0106         131072 ram6 > [   0.882507] (driver?) > [   0.882700] 0107         131072 ram7 > [   0.882705] (driver?) > [   0.882862] 0108         131072 ram8 > [   0.882866] (driver?) > [   0.883018] 0109         131072 ram9 > [   0.883021] (driver?) > [   0.883174] 010a         131072 ram10 > [   0.883178] (driver?) > [   0.883330] 010b         131072 ram11 > [   0.883333] (driver?) > [   0.883487] 010c         131072 ram12 > [   0.883490] (driver?) > [   0.883694] 010d         131072 ram13 > [   0.883699] (driver?) > [   0.883858] 010e         131072 ram14 > [   0.883863] (driver?) > [   0.884020] 010f         131072 ram15 > [   0.884024] (driver?) > [   0.884265] Kernel panic - not syncing: VFS: Unable to mount root fs > on unknown-block(0,0) > [   0.884883] Rebooting in 180 seconds.. > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,driveÁ -append "root=/dev/sda3" > > Unfortunately without any success. (same errors like before) > > Boot with U-Boot: > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -bios > /home/christian/Downloads/u-boot -machine dt_compatible=fsl,,P5020DS > -device virtio-scsi -drive > if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,driveÁ > > Output: > > U-Boot 2017.09-00322-g1f6049e (Sep 25 2017 - 20:50:48 +0200) > > CPU:  Unknown, Version: 0.0, (0x00000000) > Core: e5500, Version: 2.0, (0x80240020) > Clock Configuration: >       CPU0:400 MHz, >       CCB:400 MHz, >       DDR:200 MHz (400 MT/s data rate), LBC: unknown (LCRR[CLKDIV] = > 0x00) > L1:   D-cache 32 KiB enabled >       I-cache 32 KiB enabled > DRAM: 2 GiB > L2:   disabled > Using default environment > > > PCI: base address e0008000 >  00:01.0    - 1af4:1000 - Network controller >  00:02.0    - 1af4:1004 - Mass storage controller > PCI1: Bus 00 - 00 > > In:   serial > Out:  serial > Err:  serial > Net:  No ethernet found. > Hit any key to stop autoboot: 0 > => > > Any other hints? > > Thanks, > Christian > > > > -- > To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 11:13 ` Greg Kurz (?) @ 2018-05-18 11:50 ` Christian Zigotzky 2018-05-18 12:16 ` Greg Kurz -1 siblings, 1 reply; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 11:50 UTC (permalink / raw) To: Greg Kurz; +Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc [-- Attachment #1: Type: text/plain, Size: 201 bytes --] On 18 May 2018 at 1:13PM, Greg Kurz wrote: > And of course your kernel should be built with virtio support. I think I have enabled virtio support. Please find attached my kernel config. -- Christian [-- Attachment #2: cyrus-4.17-rc5.config --] [-- Type: text/plain, Size: 132983 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/powerpc 4.17.0-rc5 Kernel Configuration # CONFIG_PPC64=y # # Processor support # # CONFIG_PPC_BOOK3S_64 is not set CONFIG_PPC_BOOK3E_64=y # CONFIG_GENERIC_CPU is not set CONFIG_E5500_CPU=y # CONFIG_E6500_CPU is not set CONFIG_PPC_BOOK3E=y CONFIG_E500=y CONFIG_PPC_E500MC=y CONFIG_PPC_FPU=y CONFIG_FSL_EMB_PERFMON=y CONFIG_FSL_EMB_PERF_EVENT=y CONFIG_FSL_EMB_PERF_EVENT_E500=y CONFIG_BOOKE=y CONFIG_PPC_FSL_BOOK3E=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y # CONFIG_ALTIVEC is not set CONFIG_PPC_MMU_NOHASH=y CONFIG_PPC_BOOK3E_MMU=y CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_PPC_DOORBELL=y CONFIG_VDSO32=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_64BIT=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_ARCH_MMAP_RND_BITS_MAX=32 CONFIG_ARCH_MMAP_RND_BITS_MIN=18 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NR_IRQS=512 CONFIG_NMI_IPI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_PANIC_TIMEOUT=180 CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_PPC_ADV_DEBUG_REGS=y CONFIG_PPC_ADV_DEBUG_IACS=2 CONFIG_PPC_ADV_DEBUG_DACS=2 CONFIG_PPC_ADV_DEBUG_DVCS=0 CONFIG_ZONE_DMA32=y CONFIG_PGTABLE_LEVELS=4 CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="powerpc-linux-gnu-" # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="_A-EON_A1-X5000" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_KERNEL_GZIP=y CONFIG_DEFAULT_HOSTNAME="AmigaOneX5000" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_USELIB=y # CONFIG_AUDIT is not set CONFIG_HAVE_ARCH_AUDITSYSCALL=y # # IRQ subsystem # CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_IRQ_MIGRATION=y CONFIG_IRQ_DOMAIN=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y # CONFIG_GENERIC_IRQ_DEBUGFS is not set CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_HAS_TICK_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ_FULL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_CPU_ISOLATION is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_RCU_EXPERT is not set CONFIG_SRCU=y CONFIG_TREE_SRCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_BUILD_BIN2C=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_CGROUPS=y # CONFIG_MEMCG is not set # CONFIG_BLK_CGROUP is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_CFS_BANDWIDTH is not set # CONFIG_RT_GROUP_SCHED is not set # CONFIG_CGROUP_PIDS is not set # CONFIG_CGROUP_RDMA is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CPUSETS is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CGROUP_CPUACCT is not set # CONFIG_CGROUP_PERF is not set # CONFIG_CGROUP_DEBUG is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y # CONFIG_RD_XZ is not set # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set # CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_BPF=y CONFIG_EXPERT=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y CONFIG_SYSCTL_SYSCALL=y CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y CONFIG_PRINTK_NMI=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_FUTEX_PI=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_BASE_RELATIVE=y # CONFIG_BPF_SYSCALL is not set # CONFIG_USERFAULTFD is not set CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y CONFIG_EMBEDDED=y CONFIG_HAVE_PERF_EVENTS=y # CONFIG_PC104 is not set # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set # CONFIG_SLAB_FREELIST_HARDENED is not set CONFIG_SLUB_CPU_PARTIAL=y CONFIG_SYSTEM_DATA_VERIFICATION=y # CONFIG_PROFILING is not set CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set # CONFIG_JUMP_LABEL is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_RCU_TABLE_FREE=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_GCC_PLUGINS=y # CONFIG_GCC_PLUGINS is not set CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_ARCH_MMAP_RND_BITS=18 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND=y CONFIG_COMPAT_OLD_SIGACTION=y CONFIG_ARCH_HAS_PHYS_TO_DMA=y # CONFIG_REFCOUNT_FULL is not set # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_BLK_DEV_ZONED is not set # CONFIG_BLK_CMDLINE_PARSER is not set # CONFIG_BLK_WBT is not set CONFIG_BLK_DEBUG_FS=y # CONFIG_BLK_SED_OPAL is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set # CONFIG_OSF_PARTITION is not set CONFIG_AMIGA_PARTITION=y # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set CONFIG_BLOCK_COMPAT=y CONFIG_BLK_MQ_PCI=y CONFIG_BLK_MQ_VIRTIO=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_MQ_IOSCHED_KYBER=y # CONFIG_IOSCHED_BFQ is not set CONFIG_PREEMPT_NOTIFIERS=y CONFIG_ASN1=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_PPC_MSI_BITMAP=y CONFIG_FSL_CORENET_RCPM=y # # Platform support # CONFIG_FSL_SOC_BOOKE=y CONFIG_PPC_QEMU_E500=y CONFIG_CORENET_GENERIC=y # CONFIG_KVM_GUEST is not set CONFIG_EPAPR_PARAVIRT=y # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set CONFIG_PPC_SMP_MUXED_IPI=y CONFIG_MPIC=y CONFIG_MPIC_TIMER=y # CONFIG_FSL_MPIC_TIMER_WAKEUP is not set CONFIG_PPC_EPAPR_HV_PIC=y CONFIG_MPIC_MSGR=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # CPUIdle driver # # # CPU Idle # CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # POWERPC CPU Idle Drivers # # CONFIG_GEN_RTC is not set # CONFIG_SIMPLE_GPIO is not set # # Kernel options # # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ELFCORE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y CONFIG_BINFMT_MISC=y CONFIG_COREDUMP=y CONFIG_MATH_EMULATION=y CONFIG_MATH_EMULATION_FULL=y # CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED is not set # CONFIG_LD_HEAD_STUB_CATCH is not set CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_KEXEC_FILE is not set # CONFIG_RELOCATABLE is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SYS_SUPPORTS_HUGETLBFS=y CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_HAVE_GENERIC_GUP=y CONFIG_NO_BOOTMEM=y CONFIG_MEMORY_ISOLATION=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MEMORY_BALLOON=y CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_BOUNCE=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y CONFIG_CMA=y # CONFIG_CMA_DEBUG is not set # CONFIG_CMA_DEBUGFS is not set CONFIG_CMA_AREAS=7 CONFIG_ZSWAP=y CONFIG_ZPOOL=y CONFIG_ZBUD=y # CONFIG_Z3FOLD is not set CONFIG_ZSMALLOC=y CONFIG_PGTABLE_MAPPING=y CONFIG_ZSMALLOC_STAT=y CONFIG_IDLE_PAGE_TRACKING=y CONFIG_FRAME_VECTOR=y # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set CONFIG_PPC_4K_PAGES=y CONFIG_THREAD_SHIFT=14 CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_SCHED_SMT is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200 console=tty0 mem=3500M" # CONFIG_CMDLINE_FORCE is not set CONFIG_EXTRA_TARGETS="" # CONFIG_HIBERNATION is not set CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y CONFIG_FSL_LBC=y CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set # CONFIG_PCIEAER_INJECT is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PME=y # CONFIG_PCIE_DPC is not set # CONFIG_PCIE_PTM is not set CONFIG_PCI_BUS_ADDR_T_64BIT=y CONFIG_PCI_MSI=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_DEBUG is not set CONFIG_PCI_REALLOC_ENABLE_AUTO=y CONFIG_PCI_STUB=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y CONFIG_PCI_PRI=y CONFIG_PCI_PASID=y # CONFIG_HOTPLUG_PCI is not set # # Cadence PCIe controllers support # # CONFIG_PCIE_CADENCE_HOST is not set # # DesignWare PCI Core Support # # # PCI host controller drivers # # # PCI Endpoint # # CONFIG_PCI_ENDPOINT is not set # # PCI switch controller drivers # # CONFIG_PCI_SW_SWITCHTEC is not set # CONFIG_PCCARD is not set CONFIG_HAS_RAPIDIO=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y # CONFIG_RAPIDIO_TSI721 is not set CONFIG_RAPIDIO_DISC_TIMEOUT=30 # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set # CONFIG_RAPIDIO_DMA_ENGINE is not set # CONFIG_RAPIDIO_DEBUG is not set # CONFIG_RAPIDIO_ENUM_BASIC is not set # CONFIG_RAPIDIO_CHMAN is not set # CONFIG_RAPIDIO_MPORT_CDEV is not set # # RapidIO Switch drivers # # CONFIG_RAPIDIO_TSI57X is not set # CONFIG_RAPIDIO_CPS_XX is not set # CONFIG_RAPIDIO_TSI568 is not set # CONFIG_RAPIDIO_CPS_GEN2 is not set # CONFIG_RAPIDIO_RXS_GEN3 is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y CONFIG_NET_INGRESS=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y # CONFIG_UNIX_DIAG is not set # CONFIG_TLS is not set CONFIG_XFRM=y CONFIG_XFRM_ALGO=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=y # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_NET_IP_TUNNEL=y CONFIG_IP_MROUTE_COMMON=y # CONFIG_IP_MROUTE is not set CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=y CONFIG_NET_UDP_TUNNEL=y CONFIG_NET_FOU=y CONFIG_NET_FOU_IP_TUNNELS=y CONFIG_INET_AH=y CONFIG_INET_ESP=y # CONFIG_INET_ESP_OFFLOAD is not set CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_INET_UDP_DIAG is not set # CONFIG_INET_RAW_DIAG is not set # CONFIG_INET_DIAG_DESTROY is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=y CONFIG_TCP_CONG_HTCP=y CONFIG_TCP_CONG_HSTCP=y CONFIG_TCP_CONG_HYBLA=y CONFIG_TCP_CONG_VEGAS=y # CONFIG_TCP_CONG_NV is not set CONFIG_TCP_CONG_SCALABLE=y CONFIG_TCP_CONG_LP=y CONFIG_TCP_CONG_VENO=y CONFIG_TCP_CONG_YEAH=y CONFIG_TCP_CONG_ILLINOIS=y CONFIG_TCP_CONG_DCTCP=y CONFIG_TCP_CONG_CDG=y # CONFIG_TCP_CONG_BBR is not set # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_HYBLA is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_VENO is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_DCTCP is not set # CONFIG_DEFAULT_CDG is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=y CONFIG_INET6_ESP=y # CONFIG_INET6_ESP_OFFLOAD is not set CONFIG_INET6_IPCOMP=y CONFIG_IPV6_MIP6=y CONFIG_IPV6_ILA=y CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y CONFIG_IPV6_VTI=y CONFIG_IPV6_SIT=y CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_FOU=y CONFIG_IPV6_FOU_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y CONFIG_IPV6_PIMSM_V2=y # CONFIG_IPV6_SEG6_LWTUNNEL is not set # CONFIG_IPV6_SEG6_HMAC is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NET_PTP_CLASSIFY=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # CONFIG_NETFILTER_INGRESS=y # CONFIG_NETFILTER_NETLINK_ACCT is not set # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NF_LOG_NETDEV is not set # CONFIG_NF_TABLES is not set # CONFIG_NETFILTER_XTABLES is not set # CONFIG_IP_SET is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # # CONFIG_NF_SOCKET_IPV4 is not set # CONFIG_NF_DUP_IPV4 is not set # CONFIG_NF_LOG_ARP is not set # CONFIG_NF_LOG_IPV4 is not set # CONFIG_NF_REJECT_IPV4 is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # # IPv6: Netfilter Configuration # # CONFIG_NF_SOCKET_IPV6 is not set # CONFIG_NF_DUP_IPV6 is not set # CONFIG_NF_REJECT_IPV6 is not set # CONFIG_NF_LOG_IPV6 is not set # CONFIG_IP6_NF_IPTABLES is not set CONFIG_IP_DCCP=y CONFIG_INET_DCCP_DIAG=y # # DCCP CCIDs Configuration # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_TFRC_LIB=y # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_SCTP=y # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y # CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set CONFIG_INET_SCTP_DIAG=y CONFIG_RDS=y CONFIG_RDS_TCP=y # CONFIG_RDS_DEBUG is not set CONFIG_TIPC=y CONFIG_TIPC_MEDIA_UDP=y CONFIG_TIPC_DIAG=y CONFIG_ATM=y CONFIG_ATM_CLIP=y # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=y # CONFIG_L2TP_DEBUGFS is not set # CONFIG_L2TP_V3 is not set # CONFIG_BRIDGE is not set CONFIG_HAVE_NET_DSA=y # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set CONFIG_6LOWPAN=y # CONFIG_6LOWPAN_DEBUGFS is not set CONFIG_6LOWPAN_NHC=y CONFIG_6LOWPAN_NHC_DEST=y CONFIG_6LOWPAN_NHC_FRAGMENT=y CONFIG_6LOWPAN_NHC_HOP=y CONFIG_6LOWPAN_NHC_IPV6=y CONFIG_6LOWPAN_NHC_MOBILITY=y CONFIG_6LOWPAN_NHC_ROUTING=y CONFIG_6LOWPAN_NHC_UDP=y # CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set # CONFIG_6LOWPAN_GHC_UDP is not set # CONFIG_6LOWPAN_GHC_ICMPV6 is not set # CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set # CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set # CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=y # CONFIG_BATMAN_ADV_BLA is not set # CONFIG_BATMAN_ADV_DAT is not set # CONFIG_BATMAN_ADV_NC is not set # CONFIG_BATMAN_ADV_MCAST is not set CONFIG_BATMAN_ADV_DEBUGFS=y # CONFIG_BATMAN_ADV_DEBUG is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_MPLS is not set # CONFIG_NET_NSH is not set # CONFIG_HSR is not set # CONFIG_NET_SWITCHDEV is not set # CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_NET_NCSI is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y # CONFIG_CGROUP_NET_PRIO is not set # CONFIG_CGROUP_NET_CLASSID is not set CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set CONFIG_BT=m CONFIG_BT_BREDR=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_BT_HS=y CONFIG_BT_LE=y # CONFIG_BT_6LOWPAN is not set CONFIG_BT_LEDS=y # CONFIG_BT_SELFTEST is not set CONFIG_BT_DEBUGFS=y # # Bluetooth device drivers # CONFIG_BT_INTEL=m CONFIG_BT_BCM=m CONFIG_BT_RTL=m CONFIG_BT_QCA=m CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set CONFIG_BT_HCIBTUSB_BCM=y CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_ATH3K=y CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_INTEL=y CONFIG_BT_HCIUART_QCA=y CONFIG_BT_HCIUART_AG6XX=y CONFIG_BT_HCIUART_MRVL=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m CONFIG_BT_ATH3K=m # CONFIG_AF_RXRPC is not set # CONFIG_AF_KCM is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_SPY=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set CONFIG_CFG80211_CRDA_SUPPORT=y CONFIG_CFG80211_WEXT=y CONFIG_CFG80211_WEXT_EXPORT=y CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y # CONFIG_MAC80211_RC_MINSTREL_VHT is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_MESSAGE_TRACING is not set # CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 # CONFIG_WIMAX is not set CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y # CONFIG_RFKILL_INPUT is not set # CONFIG_RFKILL_GPIO is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set # CONFIG_PSAMPLE is not set # CONFIG_NET_IFE is not set CONFIG_LWTUNNEL=y CONFIG_LWTUNNEL_BPF=y CONFIG_DST_CACHE=y CONFIG_GRO_CELLS=y # CONFIG_NET_DEVLINK is not set CONFIG_MAY_USE_DEVLINK=y CONFIG_HAVE_EBPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_EXTRA_FIRMWARE="radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin radeon/BARTS_smc.bin radeon/bonaire_ce.bin radeon/bonaire_mc.bin radeon/bonaire_me.bin radeon/bonaire_mec.bin radeon/bonaire_pfp.bin radeon/bonaire_rlc.bin radeon/bonaire_sdma.bin radeon/bonaire_smc.bin radeon/BONAIRE_uvd.bin radeon/BONAIRE_vce.bin radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/CAYMAN_smc.bin radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CEDAR_smc.bin radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin radeon/CYPRESS_smc.bin radeon/CYPRESS_uvd.bin radeon/hainan_ce.bin radeon/hainan_mc.bin radeon/hainan_me.bin radeon/hainan_pfp.bin radeon/hainan_rlc.bin radeon/hainan_smc.bin radeon/hawaii_ce.bin radeon/hawaii_mc.bin radeon/hawaii_me.bin radeon/hawaii_mec.bin radeon/hawaii_pfp.bin radeon/hawaii_rlc.bin radeon/hawaii_sdma.bin radeon/hawaii_smc.bin radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin radeon/JUNIPER_smc.bin radeon/kabini_ce.bin radeon/kabini_me.bin radeon/kabini_mec.bin radeon/kabini_pfp.bin radeon/kabini_rlc.bin radeon/kabini_sdma.bin radeon/kaveri_ce.bin radeon/kaveri_me.bin radeon/kaveri_mec2.bin radeon/kaveri_mec.bin radeon/kaveri_pfp.bin radeon/kaveri_rlc.bin radeon/kaveri_sdma.bin radeon/mullins_ce.bin radeon/mullins_me.bin radeon/mullins_mec.bin radeon/mullins_pfp.bin radeon/mullins_rlc.bin radeon/mullins_sdma.bin radeon/oland_ce.bin radeon/oland_mc.bin radeon/oland_me.bin radeon/oland_pfp.bin radeon/oland_rlc.bin radeon/oland_smc.bin radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/pitcairn_ce.bin radeon/pitcairn_k_smc.bin radeon/pitcairn_mc.bin radeon/pitcairn_me.bin radeon/pitcairn_pfp.bin radeon/pitcairn_rlc.bin radeon/pitcairn_smc.bin radeon/R100_cp.bin radeon/R200_cp.bin radeon/R300_cp.bin radeon/R420_cp.bin radeon/R520_cp.bin radeon/R600_me.bin radeon/R600_pfp.bin radeon/R600_rlc.bin radeon/R600_uvd.bin radeon/R700_rlc.bin radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/RS600_cp.bin radeon/RS690_cp.bin radeon/RS780_me.bin radeon/RS780_pfp.bin radeon/RS780_uvd.bin radeon/RV610_me.bin radeon/RV610_pfp.bin radeon/RV620_me.bin radeon/RV620_pfp.bin radeon/RV630_me.bin radeon/RV630_pfp.bin radeon/RV635_me.bin radeon/RV635_pfp.bin radeon/RV670_me.bin radeon/RV670_pfp.bin radeon/RV710_me.bin radeon/RV710_pfp.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin radeon/RV730_me.bin radeon/RV730_pfp.bin radeon/RV730_smc.bin radeon/RV740_smc.bin radeon/RV770_me.bin radeon/RV770_pfp.bin radeon/RV770_smc.bin radeon/RV770_uvd.bin radeon/SUMO2_me.bin radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/tahiti_ce.bin radeon/tahiti_mc.bin radeon/tahiti_me.bin radeon/tahiti_pfp.bin radeon/tahiti_rlc.bin radeon/tahiti_smc.bin radeon/TAHITI_uvd.bin radeon/TAHITI_vce.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/verde_ce.bin radeon/verde_mc.bin radeon/verde_me.bin radeon/verde_pfp.bin radeon/verde_rlc.bin radeon/verde_smc.bin radeon/si58_mc.bin radeon/hawaii_k_smc.bin radeon/hainan_k_smc.bin radeon/bonaire_k_smc.bin radeon/tahiti_k_smc.bin radeon/oland_k_smc.bin radeon/verde_k_smc.bin" CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_WANT_DEV_COREDUMP=y # CONFIG_ALLOW_DEV_COREDUMP is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_SOC_BUS=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # # Bus devices # # CONFIG_SIMPLE_PM_BUS is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # # Partition parsers # # # User Modules And Translation Layers # CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y CONFIG_FTL=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # CONFIG_MTD_SWAP is not set # CONFIG_MTD_PARTITIONED_MASTER is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set # CONFIG_MTD_MCHP23K256 is not set # CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOCG3 is not set # CONFIG_MTD_ONENAND is not set CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_BCH is not set # CONFIG_MTD_NAND_DENALI_PCI is not set # CONFIG_MTD_NAND_DENALI_DT is not set # CONFIG_MTD_NAND_GPIO is not set # CONFIG_MTD_NAND_RICOH is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_DOCG4 is not set # CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y # # LPDDR & LPDDR2 PCM memory drivers # # CONFIG_MTD_LPDDR is not set CONFIG_MTD_SPI_NOR=y # CONFIG_MTD_MT81xx_NOR is not set CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_LIMIT=20 # CONFIG_MTD_UBI_FASTMAP is not set # CONFIG_MTD_UBI_GLUEBI is not set # CONFIG_MTD_UBI_BLOCK is not set CONFIG_DTC=y CONFIG_OF=y # CONFIG_OF_UNITTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_KOBJ=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_NET=y CONFIG_OF_MDIO=y CONFIG_OF_RESERVED_MEM=y # CONFIG_OF_OVERLAY is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_NULL_BLK is not set # CONFIG_BLK_DEV_FD is not set CONFIG_CDROM=y # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set CONFIG_ZRAM=y # CONFIG_ZRAM_WRITEBACK is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SKD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_VIRTIO_BLK=y # CONFIG_VIRTIO_BLK_SCSI is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_BLK_DEV_RSXX is not set # # NVME Support # CONFIG_NVME_CORE=m CONFIG_BLK_DEV_NVME=m # CONFIG_NVME_MULTIPATH is not set # CONFIG_NVME_FC is not set # CONFIG_NVME_TARGET is not set # # Misc devices # # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_PCI_ENDPOINT_TEST is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set CONFIG_EEPROM_LEGACY=y # CONFIG_EEPROM_MAX6875 is not set CONFIG_EEPROM_93CX6=m # CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set # CONFIG_CB710_CORE is not set # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set CONFIG_ALTERA_STAPL=m # # Intel MIC & related support # # # Intel MIC Bus Driver # # # SCIF Bus Driver # # # VOP Bus Driver # # # Intel MIC Host Driver # # # Intel MIC Card Driver # # # SCIF Driver # # # Intel MIC Coprocessor State Management (COSM) Drivers # # # VOP Driver # # CONFIG_GENWQE is not set # CONFIG_ECHO is not set # CONFIG_MISC_RTSX_PCI is not set # CONFIG_MISC_RTSX_USB is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_MQ_DEFAULT is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_MVUMI is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_SCSI_ESAS2R is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_SMARTPQI is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_WD719X is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set CONFIG_SCSI_VIRTIO=y # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y CONFIG_SATA_MOBILE_LPM_POLICY=0 CONFIG_SATA_AHCI_PLATFORM=y # CONFIG_AHCI_CEVA is not set CONFIG_AHCI_QORIQ=y CONFIG_SATA_FSL=y # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set CONFIG_SATA_SIL24=y CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set CONFIG_SATA_SX4=y CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # # CONFIG_ATA_PIIX is not set # CONFIG_SATA_DWC is not set CONFIG_SATA_MV=y # CONFIG_SATA_NV is not set CONFIG_SATA_PROMISE=y CONFIG_SATA_SIL=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set CONFIG_PATA_JMICRON=y CONFIG_PATA_MARVELL=y # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set CONFIG_PATA_SIL680=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BCACHE=y # CONFIG_BCACHE_DEBUG is not set # CONFIG_BCACHE_CLOSURES_DEBUG is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y # CONFIG_DM_MQ_DEFAULT is not set # CONFIG_DM_DEBUG is not set # CONFIG_DM_UNSTRIPED is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_CACHE is not set # CONFIG_DM_ERA is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_RAID is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_DM_FLAKEY is not set # CONFIG_DM_VERITY is not set # CONFIG_DM_SWITCH is not set # CONFIG_DM_LOG_WRITES is not set # CONFIG_DM_INTEGRITY is not set # CONFIG_TARGET_CORE is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m CONFIG_FIREWIRE_NET=m # CONFIG_FIREWIRE_NOSY is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_CORE=y CONFIG_BONDING=m CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_NET_FC is not set # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_IPVLAN is not set # CONFIG_VXLAN is not set # CONFIG_GENEVE is not set # CONFIG_GTP is not set # CONFIG_MACSEC is not set # CONFIG_NETCONSOLE is not set # CONFIG_RIONET is not set CONFIG_TUN=m # CONFIG_TUN_VNET_CROSS_LE is not set # CONFIG_VETH is not set CONFIG_VIRTIO_NET=y # CONFIG_NLMON is not set # CONFIG_ARCNET is not set CONFIG_ATM_DRIVERS=y # CONFIG_ATM_DUMMY is not set # CONFIG_ATM_TCP is not set # CONFIG_ATM_LANAI is not set # CONFIG_ATM_ENI is not set # CONFIG_ATM_NICSTAR is not set # CONFIG_ATM_IDT77252 is not set # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E is not set # CONFIG_ATM_HE is not set # CONFIG_ATM_SOLOS is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # CONFIG_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set # CONFIG_NET_VENDOR_AGERE is not set CONFIG_NET_VENDOR_ALACRITECH=y # CONFIG_SLICOSS is not set # CONFIG_NET_VENDOR_ALTEON is not set # CONFIG_ALTERA_TSE is not set # CONFIG_NET_VENDOR_AMAZON is not set # CONFIG_NET_VENDOR_AMD is not set CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_VENDOR_ATHEROS is not set # CONFIG_NET_VENDOR_AURORA is not set # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROCADE is not set # CONFIG_NET_VENDOR_CAVIUM is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_CISCO is not set CONFIG_NET_VENDOR_CORTINA=y # CONFIG_GEMINI_ETHERNET is not set # CONFIG_DNET is not set # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set # CONFIG_NET_VENDOR_EZCHIP is not set # CONFIG_NET_VENDOR_EXAR is not set CONFIG_NET_VENDOR_FREESCALE=y CONFIG_FSL_FMAN=y CONFIG_FSL_PQ_MDIO=y CONFIG_FSL_XGMAC_MDIO=y CONFIG_GIANFAR=y CONFIG_FSL_DPAA_ETH=y # CONFIG_NET_VENDOR_HP is not set CONFIG_NET_VENDOR_HUAWEI=y CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set # CONFIG_E1000 is not set CONFIG_E1000E=m CONFIG_IGB=m CONFIG_IGB_HWMON=y # CONFIG_IGBVF is not set # CONFIG_IXGB is not set # CONFIG_IXGBE is not set # CONFIG_IXGBEVF is not set # CONFIG_I40E is not set # CONFIG_I40EVF is not set # CONFIG_ICE is not set # CONFIG_FM10K is not set CONFIG_NET_VENDOR_I825XX=y # CONFIG_JME is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set # CONFIG_ENCX24J600 is not set # CONFIG_LAN743X is not set # CONFIG_NET_VENDOR_MYRI is not set # CONFIG_FEALNX is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NETRONOME is not set CONFIG_NET_VENDOR_NI=y # CONFIG_NET_VENDOR_NVIDIA is not set # CONFIG_NET_VENDOR_OKI is not set # CONFIG_ETHOC is not set # CONFIG_NET_PACKET_ENGINE is not set # CONFIG_NET_VENDOR_QLOGIC is not set # CONFIG_NET_VENDOR_QUALCOMM is not set CONFIG_NET_VENDOR_REALTEK=y CONFIG_8139CP=y CONFIG_8139TOO=y CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_R8169=y # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_RDC is not set # CONFIG_NET_VENDOR_ROCKER is not set # CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set CONFIG_NET_VENDOR_SOLARFLARE=y # CONFIG_SFC is not set # CONFIG_SFC_FALCON is not set # CONFIG_NET_VENDOR_SMSC is not set CONFIG_NET_VENDOR_SOCIONEXT=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_NET_VENDOR_XILINX is not set # CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BUS=y # CONFIG_MDIO_BCM_UNIMAC is not set # CONFIG_MDIO_BITBANG is not set CONFIG_MDIO_BUS_MUX=y CONFIG_MDIO_BUS_MUX_GPIO=y CONFIG_MDIO_BUS_MUX_MMIOREG=y # CONFIG_MDIO_HISI_FEMAC is not set # CONFIG_MDIO_OCTEON is not set # CONFIG_MDIO_THUNDER is not set CONFIG_PHYLIB=y CONFIG_SWPHY=y # CONFIG_LED_TRIGGER_PHY is not set # # MII PHY device drivers # # CONFIG_AMD_PHY is not set CONFIG_AQUANTIA_PHY=y # CONFIG_AT803X_PHY is not set # CONFIG_BCM7XXX_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_CORTINA_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_DP83822_PHY is not set # CONFIG_DP83848_PHY is not set # CONFIG_DP83867_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_INTEL_XWAY_PHY is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_MARVELL_PHY is not set # CONFIG_MARVELL_10G_PHY is not set # CONFIG_MICREL_PHY is not set CONFIG_MICROCHIP_PHY=y # CONFIG_MICROSEMI_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_QSEMI_PHY is not set CONFIG_REALTEK_PHY=y # CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_STE10XP is not set # CONFIG_TERANETICS_PHY is not set CONFIG_VITESSE_PHY=y # CONFIG_XILINX_GMII2RGMII is not set # CONFIG_MICREL_KS8995MA is not set CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=y CONFIG_PPP_MULTILINK=y # CONFIG_PPPOATM is not set CONFIG_PPPOE=y # CONFIG_PPPOL2TP is not set CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y # CONFIG_SLIP is not set CONFIG_SLHC=y CONFIG_USB_NET_DRIVERS=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=m CONFIG_USB_LAN78XX=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_AX88179_178A=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_CDC_EEM=m CONFIG_USB_NET_CDC_NCM=m CONFIG_USB_NET_HUAWEI_CDC_NCM=m CONFIG_USB_NET_CDC_MBIM=m CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_SR9700=m CONFIG_USB_NET_SR9800=m CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET_ENABLE=m CONFIG_USB_NET_CDC_SUBSET=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=m CONFIG_USB_NET_CX82310_ETH=m CONFIG_USB_NET_KALMIA=m CONFIG_USB_NET_QMI_WWAN=m CONFIG_USB_HSO=m CONFIG_USB_NET_INT51X1=m CONFIG_USB_IPHETH=m CONFIG_USB_SIERRA_NET=m CONFIG_USB_VL600=m CONFIG_USB_NET_CH9200=m CONFIG_WLAN=y # CONFIG_WIRELESS_WDS is not set CONFIG_WLAN_VENDOR_ADMTEK=y CONFIG_ADM8211=m CONFIG_ATH_COMMON=m CONFIG_WLAN_VENDOR_ATH=y # CONFIG_ATH_DEBUG is not set # CONFIG_ATH5K is not set # CONFIG_ATH5K_PCI is not set # CONFIG_ATH9K is not set # CONFIG_ATH9K_HTC is not set CONFIG_CARL9170=m CONFIG_CARL9170_LEDS=y CONFIG_CARL9170_WPC=y # CONFIG_CARL9170_HWRNG is not set # CONFIG_ATH6KL is not set # CONFIG_AR5523 is not set # CONFIG_WIL6210 is not set # CONFIG_ATH10K is not set # CONFIG_WCN36XX is not set CONFIG_WLAN_VENDOR_ATMEL=y # CONFIG_ATMEL is not set CONFIG_AT76C50X_USB=m CONFIG_WLAN_VENDOR_BROADCOM=y CONFIG_B43=m CONFIG_B43_BCMA=y CONFIG_B43_SSB=y CONFIG_B43_BUSES_BCMA_AND_SSB=y # CONFIG_B43_BUSES_BCMA is not set # CONFIG_B43_BUSES_SSB is not set CONFIG_B43_PCI_AUTOSELECT=y # CONFIG_B43_SDIO is not set CONFIG_B43_BCMA_PIO=y CONFIG_B43_PIO=y # CONFIG_B43_PHY_G is not set # CONFIG_B43_PHY_N is not set # CONFIG_B43_PHY_LP is not set # CONFIG_B43_PHY_HT is not set CONFIG_B43_LEDS=y CONFIG_B43_HWRNG=y # CONFIG_B43_DEBUG is not set # CONFIG_B43LEGACY is not set # CONFIG_BRCMSMAC is not set # CONFIG_BRCMFMAC is not set CONFIG_WLAN_VENDOR_CISCO=y # CONFIG_AIRO is not set CONFIG_WLAN_VENDOR_INTEL=y # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWL4965 is not set # CONFIG_IWL3945 is not set # CONFIG_IWLWIFI is not set CONFIG_WLAN_VENDOR_INTERSIL=y # CONFIG_HOSTAP is not set CONFIG_HERMES=m CONFIG_HERMES_PRISM=y CONFIG_HERMES_CACHE_FW_ON_INIT=y CONFIG_PLX_HERMES=m # CONFIG_TMD_HERMES is not set # CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=m # CONFIG_ORINOCO_USB is not set # CONFIG_P54_COMMON is not set CONFIG_PRISM54=m CONFIG_WLAN_VENDOR_MARVELL=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_MWIFIEX is not set # CONFIG_MWL8K is not set CONFIG_WLAN_VENDOR_MEDIATEK=y # CONFIG_MT7601U is not set # CONFIG_MT76x2E is not set CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m # CONFIG_RT2400PCI is not set # CONFIG_RT2500PCI is not set # CONFIG_RT61PCI is not set CONFIG_RT2800PCI=m CONFIG_RT2800PCI_RT33XX=y CONFIG_RT2800PCI_RT35XX=y CONFIG_RT2800PCI_RT53XX=y CONFIG_RT2800PCI_RT3290=y CONFIG_RT2500USB=m CONFIG_RT73USB=m CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y CONFIG_RT2800USB_RT35XX=y # CONFIG_RT2800USB_RT3573 is not set # CONFIG_RT2800USB_RT53XX is not set # CONFIG_RT2800USB_RT55XX is not set # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=m CONFIG_RT2800_LIB_MMIO=m CONFIG_RT2X00_LIB_MMIO=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set CONFIG_WLAN_VENDOR_REALTEK=y # CONFIG_RTL8180 is not set CONFIG_RTL8187=m CONFIG_RTL8187_LEDS=y CONFIG_RTL_CARDS=m # CONFIG_RTL8192CE is not set # CONFIG_RTL8192SE is not set # CONFIG_RTL8192DE is not set # CONFIG_RTL8723AE is not set # CONFIG_RTL8723BE is not set # CONFIG_RTL8188EE is not set # CONFIG_RTL8192EE is not set # CONFIG_RTL8821AE is not set CONFIG_RTL8192CU=m CONFIG_RTLWIFI=m CONFIG_RTLWIFI_USB=m # CONFIG_RTLWIFI_DEBUG is not set CONFIG_RTL8192C_COMMON=m # CONFIG_RTL8XXXU is not set CONFIG_WLAN_VENDOR_RSI=y # CONFIG_RSI_91X is not set CONFIG_WLAN_VENDOR_ST=y # CONFIG_CW1200 is not set CONFIG_WLAN_VENDOR_TI=y # CONFIG_WL1251 is not set # CONFIG_WL12XX is not set # CONFIG_WL18XX is not set # CONFIG_WLCORE is not set CONFIG_WLAN_VENDOR_ZYDAS=y CONFIG_USB_ZD1201=m CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_WLAN_VENDOR_QUANTENNA=y # CONFIG_QTNFMAC_PEARL_PCIE is not set # CONFIG_MAC80211_HWSIM is not set CONFIG_USB_NET_RNDIS_WLAN=m # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_VMXNET3 is not set # CONFIG_NETDEVSIM is not set # CONFIG_ISDN is not set # CONFIG_NVM is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_LEDS=y CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_DLINK_DIR685 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_OMAP4 is not set # CONFIG_KEYBOARD_TM2_TOUCHKEY is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_CAP11XX is not set # CONFIG_KEYBOARD_BCM is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_BYD=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_PS2_FOCALTECH=y CONFIG_MOUSE_PS2_SMBUS=y CONFIG_MOUSE_SERIAL=y CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_CYAPA is not set # CONFIG_MOUSE_ELAN_I2C is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set CONFIG_MOUSE_SYNAPTICS_USB=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m # CONFIG_JOYSTICK_ZHENHUA is not set CONFIG_JOYSTICK_AS5011=m CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y # CONFIG_JOYSTICK_PSXPAD_SPI is not set # CONFIG_JOYSTICK_PXRC is not set CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_HANWANG=m CONFIG_TABLET_USB_KBTAB=m # CONFIG_TABLET_USB_PEGASUS is not set CONFIG_TABLET_SERIAL_WACOM4=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_AD7877=m CONFIG_TOUCHSCREEN_AD7879=m CONFIG_TOUCHSCREEN_AD7879_I2C=m CONFIG_TOUCHSCREEN_AD7879_SPI=m CONFIG_TOUCHSCREEN_AR1021_I2C=m CONFIG_TOUCHSCREEN_ATMEL_MXT=m # CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set CONFIG_TOUCHSCREEN_BU21013=m # CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set CONFIG_TOUCHSCREEN_CYTTSP_CORE=m # CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set # CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m # CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set # CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set CONFIG_TOUCHSCREEN_DYNAPRO=m CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_EETI=m CONFIG_TOUCHSCREEN_EGALAX=m CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m # CONFIG_TOUCHSCREEN_EXC3000 is not set CONFIG_TOUCHSCREEN_FUJITSU=m # CONFIG_TOUCHSCREEN_GOODIX is not set # CONFIG_TOUCHSCREEN_HIDEEP is not set CONFIG_TOUCHSCREEN_ILI210X=m # CONFIG_TOUCHSCREEN_S6SY761 is not set CONFIG_TOUCHSCREEN_GUNZE=m # CONFIG_TOUCHSCREEN_EKTF2127 is not set CONFIG_TOUCHSCREEN_ELAN=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m # CONFIG_TOUCHSCREEN_WACOM_I2C is not set CONFIG_TOUCHSCREEN_MAX11801=m CONFIG_TOUCHSCREEN_MCS5000=m CONFIG_TOUCHSCREEN_MMS114=m CONFIG_TOUCHSCREEN_MELFAS_MIP4=m CONFIG_TOUCHSCREEN_MTOUCH=m # CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set CONFIG_TOUCHSCREEN_INEXIO=m # CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_TOUCHSCREEN_PENMOUNT=m # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m CONFIG_TOUCHSCREEN_PIXCIR=m # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set # CONFIG_TOUCHSCREEN_WM97XX is not set CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y CONFIG_TOUCHSCREEN_USB_JASTEC=y CONFIG_TOUCHSCREEN_USB_ELO=y CONFIG_TOUCHSCREEN_USB_E2I=y CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y CONFIG_TOUCHSCREEN_USB_NEXIO=y CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC200X_CORE=m CONFIG_TOUCHSCREEN_TSC2004=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m # CONFIG_TOUCHSCREEN_RM_TS is not set # CONFIG_TOUCHSCREEN_SILEAD is not set # CONFIG_TOUCHSCREEN_SIS_I2C is not set CONFIG_TOUCHSCREEN_ST1232=m # CONFIG_TOUCHSCREEN_STMFTS is not set # CONFIG_TOUCHSCREEN_SUR40 is not set # CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set CONFIG_TOUCHSCREEN_SX8654=m # CONFIG_TOUCHSCREEN_TPS6507X is not set # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ZFORCE is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATMEL_CAPTOUCH is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_E3X0_BUTTON is not set # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_GP2A is not set # CONFIG_INPUT_GPIO_BEEPER is not set # CONFIG_INPUT_GPIO_DECODER is not set CONFIG_INPUT_ATI_REMOTE2=m # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_KXTJ9 is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_CM109=m # CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_IMS_PCU is not set # CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set # CONFIG_INPUT_DRV260X_HAPTICS is not set # CONFIG_INPUT_DRV2665_HAPTICS is not set # CONFIG_INPUT_DRV2667_HAPTICS is not set # CONFIG_RMI4_CORE is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_SERIO_APBPS2 is not set # CONFIG_SERIO_GPIO_PS2 is not set CONFIG_USERIO=y CONFIG_GAMEPORT=y # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set # CONFIG_GAMEPORT_FM801 is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set CONFIG_PPC_EPAPR_HV_BYTECHAN=y # CONFIG_PPC_EARLY_DEBUG_EHV_BC is not set CONFIG_DEVMEM=y CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y # CONFIG_SERIAL_8250_ASPEED_VUART is not set CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_FSL=y # CONFIG_SERIAL_8250_DW is not set CONFIG_SERIAL_8250_RT288X=y # CONFIG_SERIAL_8250_MOXA is not set # CONFIG_SERIAL_OF_PLATFORM is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set # CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # CONFIG_SERIAL_DEV_BUS is not set # CONFIG_TTY_PRINTK is not set CONFIG_HVC_DRIVER=y # CONFIG_HVC_UDBG is not set CONFIG_VIRTIO_CONSOLE=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_VIRTIO is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_TCG_TPM=m CONFIG_HW_RANDOM_TPM=y # CONFIG_TCG_TIS is not set # CONFIG_TCG_TIS_SPI is not set # CONFIG_TCG_TIS_I2C_ATMEL is not set # CONFIG_TCG_TIS_I2C_INFINEON is not set # CONFIG_TCG_TIS_I2C_NUVOTON is not set # CONFIG_TCG_ATMEL is not set # CONFIG_TCG_VTPM_PROXY is not set # CONFIG_TCG_TIS_ST33ZP24_I2C is not set # CONFIG_TCG_TIS_ST33ZP24_SPI is not set CONFIG_DEVPORT=y # CONFIG_XILLYBUS is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y # # Multiplexer I2C Chip support # # CONFIG_I2C_ARB_GPIO_CHALLENGE is not set CONFIG_I2C_MUX_GPIO=y # CONFIG_I2C_MUX_GPMUX is not set # CONFIG_I2C_MUX_LTC4306 is not set # CONFIG_I2C_MUX_PCA9541 is not set CONFIG_I2C_MUX_PCA954x=y # CONFIG_I2C_MUX_REG is not set # CONFIG_I2C_MUX_MLXCPLD is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set # CONFIG_I2C_DESIGNWARE_PLATFORM is not set # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EMEV2 is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_RK3X is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_ROBOTFUZZ_OSIF is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_SLAVE is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_AXI_SPI_ENGINE is not set CONFIG_SPI_BITBANG=y # CONFIG_SPI_CADENCE is not set # CONFIG_SPI_DESIGNWARE is not set CONFIG_SPI_GPIO=y CONFIG_SPI_FSL_LIB=y CONFIG_SPI_FSL_CPM=y CONFIG_SPI_FSL_SPI=y CONFIG_SPI_FSL_ESPI=y # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_PXA2XX is not set # CONFIG_SPI_ROCKCHIP is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_ZYNQMP_GQSPI is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_LOOPBACK_TEST is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set # CONFIG_PPS_CLIENT_LDISC is not set # CONFIG_PPS_CLIENT_GPIO is not set # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y CONFIG_PTP_1588_CLOCK_GIANFAR=y # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PINCTRL is not set CONFIG_GPIOLIB=y CONFIG_OF_GPIO=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set CONFIG_GPIO_GENERIC=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set # CONFIG_GPIO_DWAPB is not set # CONFIG_GPIO_EXAR is not set # CONFIG_GPIO_FTGPIO010 is not set CONFIG_GPIO_GENERIC_PLATFORM=y # CONFIG_GPIO_GRGPIO is not set # CONFIG_GPIO_HLWD is not set # CONFIG_GPIO_MB86S7X is not set # CONFIG_GPIO_MOCKUP is not set CONFIG_GPIO_MPC8XXX=y # CONFIG_GPIO_XILINX is not set # # I2C GPIO expanders # # CONFIG_GPIO_ADP5588 is not set # CONFIG_GPIO_ADNP is not set # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_TPIC2810 is not set # # MFD GPIO expanders # # # PCI GPIO expanders # # CONFIG_GPIO_PCI_IDIO_16 is not set # CONFIG_GPIO_PCIE_IDIO_24 is not set # CONFIG_GPIO_RDC321X is not set # # SPI GPIO expanders # # CONFIG_GPIO_74X164 is not set # CONFIG_GPIO_MAX3191X is not set # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set # CONFIG_GPIO_XRA1403 is not set # # USB GPIO expanders # # CONFIG_W1 is not set # CONFIG_POWER_AVS is not set CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y # CONFIG_POWER_RESET_LTC2952 is not set # CONFIG_POWER_RESET_RESTART is not set # CONFIG_POWER_RESET_SYSCON is not set # CONFIG_POWER_RESET_SYSCON_POWEROFF is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_SBS is not set # CONFIG_CHARGER_SBS is not set # CONFIG_MANAGER_SBS is not set # CONFIG_BATTERY_BQ27XXX is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_GPIO is not set # CONFIG_CHARGER_LTC3651 is not set # CONFIG_CHARGER_DETECTOR_MAX14656 is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_BQ24257 is not set # CONFIG_CHARGER_BQ24735 is not set # CONFIG_CHARGER_BQ25890 is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_BATTERY_GAUGE_LTC2941 is not set # CONFIG_CHARGER_RT9455 is not set CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_AD7314 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7310 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ASPEED is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_GPIO_FAN is not set # CONFIG_SENSORS_HIH6130 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_POWR1220 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LTC2945 is not set # CONFIG_SENSORS_LTC2990 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4222 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4260 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX31722 is not set # CONFIG_SENSORS_MAX6621 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MAX31790 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_TC654 is not set # CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LM95234 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_NTC_THERMISTOR is not set # CONFIG_SENSORS_NCT7802 is not set # CONFIG_SENSORS_NCT7904 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SHT3x is not set # CONFIG_SENSORS_SHTC1 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_STTS751 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_ADC128D818 is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_INA3221 is not set # CONFIG_SENSORS_TC74 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP103 is not set # CONFIG_SENSORS_TMP108 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83773G is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set CONFIG_THERMAL=y # CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_OF=y # CONFIG_THERMAL_WRITABLE_TRIPS is not set CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y # CONFIG_THERMAL_GOV_BANG_BANG is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set # CONFIG_CLOCK_THERMAL is not set # CONFIG_DEVFREQ_THERMAL is not set # CONFIG_THERMAL_EMULATION is not set # CONFIG_QORIQ_THERMAL is not set # # ACPI INT340X thermal drivers # # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_SDIOHOST_POSSIBLE=y # CONFIG_SSB_SDIOHOST is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set # CONFIG_SSB_DRIVER_GPIO is not set CONFIG_BCMA_POSSIBLE=y CONFIG_BCMA=m CONFIG_BCMA_BLOCKIO=y CONFIG_BCMA_HOST_PCI_POSSIBLE=y CONFIG_BCMA_HOST_PCI=y # CONFIG_BCMA_HOST_SOC is not set CONFIG_BCMA_DRIVER_PCI=y # CONFIG_BCMA_DRIVER_GMAC_CMN is not set # CONFIG_BCMA_DRIVER_GPIO is not set # CONFIG_BCMA_DEBUG is not set # # Multifunction device drivers # CONFIG_MFD_CORE=m # CONFIG_MFD_ACT8945A is not set # CONFIG_MFD_AS3711 is not set # CONFIG_MFD_AS3722 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_AAT2870_CORE is not set # CONFIG_MFD_ATMEL_FLEXCOM is not set # CONFIG_MFD_ATMEL_HLCDC is not set # CONFIG_MFD_BCM590XX is not set # CONFIG_MFD_BD9571MWV is not set # CONFIG_MFD_AXP20X_I2C is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_MFD_DA9062 is not set # CONFIG_MFD_DA9063 is not set # CONFIG_MFD_DA9150 is not set # CONFIG_MFD_DLN2 is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_HI6421_PMIC is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_I2CPLD is not set # CONFIG_LPC_ICH is not set # CONFIG_LPC_SCH is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_MAX14577 is not set # CONFIG_MFD_MAX77620 is not set # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX77843 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_MENF21BMC is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_CPCAP is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_UCB1400_CORE is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RT5033 is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_RK808 is not set # CONFIG_MFD_RN5T618 is not set # CONFIG_MFD_SEC_CORE is not set CONFIG_MFD_SI476X_CORE=m # CONFIG_MFD_SM501 is not set # CONFIG_MFD_SKY81452 is not set # CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP3943 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_TI_LMU is not set # CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65086 is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TI_LP873X is not set # CONFIG_MFD_TI_LP87565 is not set # CONFIG_MFD_TPS65218 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set CONFIG_MFD_WL1273_CORE=m # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_REGULATOR is not set CONFIG_RC_CORE=m # CONFIG_RC_MAP is not set # CONFIG_LIRC is not set CONFIG_RC_DECODERS=y CONFIG_IR_NEC_DECODER=m CONFIG_IR_RC5_DECODER=m CONFIG_IR_RC6_DECODER=m CONFIG_IR_JVC_DECODER=m CONFIG_IR_SONY_DECODER=m CONFIG_IR_SANYO_DECODER=m CONFIG_IR_SHARP_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m CONFIG_IR_XMP_DECODER=m # CONFIG_IR_IMON_DECODER is not set CONFIG_RC_DEVICES=y CONFIG_RC_ATI_REMOTE=m # CONFIG_IR_HIX5HD2 is not set CONFIG_IR_IMON=m # CONFIG_IR_IMON_RAW is not set CONFIG_IR_MCEUSB=m CONFIG_IR_REDRAT3=m CONFIG_IR_STREAMZAP=m # CONFIG_IR_IGORPLUGUSB is not set CONFIG_IR_IGUANA=m CONFIG_IR_TTUSBIR=m CONFIG_RC_LOOPBACK=m CONFIG_IR_GPIO_CIR=m # CONFIG_IR_SERIAL is not set # CONFIG_IR_SIR is not set CONFIG_MEDIA_SUPPORT=m # # Multimedia core support # CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_SDR_SUPPORT=y # CONFIG_MEDIA_CEC_SUPPORT is not set CONFIG_MEDIA_CONTROLLER=y # CONFIG_MEDIA_CONTROLLER_DVB is not set CONFIG_VIDEO_DEV=m # CONFIG_VIDEO_V4L2_SUBDEV_API is not set CONFIG_VIDEO_V4L2=m # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m CONFIG_V4L2_FWNODE=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_DVB_CORE=m # CONFIG_DVB_MMAP is not set CONFIG_DVB_NET=y CONFIG_TTPCI_EEPROM=m CONFIG_DVB_MAX_ADAPTERS=8 # CONFIG_DVB_DYNAMIC_MINORS is not set # CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set # CONFIG_DVB_ULE_DEBUG is not set # # Media drivers # CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m # CONFIG_USB_M5602 is not set # CONFIG_USB_STV06XX is not set # CONFIG_USB_GL860 is not set # CONFIG_USB_GSPCA_BENQ is not set # CONFIG_USB_GSPCA_CONEX is not set # CONFIG_USB_GSPCA_CPIA1 is not set # CONFIG_USB_GSPCA_DTCS033 is not set # CONFIG_USB_GSPCA_ETOMS is not set # CONFIG_USB_GSPCA_FINEPIX is not set # CONFIG_USB_GSPCA_JEILINJ is not set # CONFIG_USB_GSPCA_JL2005BCD is not set # CONFIG_USB_GSPCA_KINECT is not set # CONFIG_USB_GSPCA_KONICA is not set # CONFIG_USB_GSPCA_MARS is not set # CONFIG_USB_GSPCA_MR97310A is not set # CONFIG_USB_GSPCA_NW80X is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_OV534_9 is not set # CONFIG_USB_GSPCA_PAC207 is not set # CONFIG_USB_GSPCA_PAC7302 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SE401 is not set # CONFIG_USB_GSPCA_SN9C2028 is not set # CONFIG_USB_GSPCA_SN9C20X is not set # CONFIG_USB_GSPCA_SONIXB is not set # CONFIG_USB_GSPCA_SONIXJ is not set # CONFIG_USB_GSPCA_SPCA500 is not set # CONFIG_USB_GSPCA_SPCA501 is not set # CONFIG_USB_GSPCA_SPCA505 is not set # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set # CONFIG_USB_GSPCA_SPCA561 is not set # CONFIG_USB_GSPCA_SPCA1528 is not set # CONFIG_USB_GSPCA_SQ905 is not set # CONFIG_USB_GSPCA_SQ905C is not set # CONFIG_USB_GSPCA_SQ930X is not set # CONFIG_USB_GSPCA_STK014 is not set # CONFIG_USB_GSPCA_STK1135 is not set # CONFIG_USB_GSPCA_STV0680 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set # CONFIG_USB_GSPCA_T613 is not set # CONFIG_USB_GSPCA_TOPRO is not set # CONFIG_USB_GSPCA_TOUPTEK is not set # CONFIG_USB_GSPCA_TV8532 is not set # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_VICAM is not set # CONFIG_USB_GSPCA_XIRLINK_CIT is not set # CONFIG_USB_GSPCA_ZC3XX is not set CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_PWC_INPUT_EVDEV=y CONFIG_VIDEO_CPIA2=m CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m CONFIG_USB_S2255=m CONFIG_VIDEO_USBTV=m # # Analog TV USB devices # CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_HDPVR=m CONFIG_VIDEO_USBVISION=m CONFIG_VIDEO_STK1160_COMMON=m CONFIG_VIDEO_STK1160=m # CONFIG_VIDEO_GO7007 is not set # # Analog/digital TV USB devices # CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_AU0828_V4L2=y # CONFIG_VIDEO_AU0828_RC is not set CONFIG_VIDEO_CX231XX=m CONFIG_VIDEO_CX231XX_RC=y CONFIG_VIDEO_CX231XX_ALSA=m CONFIG_VIDEO_CX231XX_DVB=m CONFIG_VIDEO_TM6000=m CONFIG_VIDEO_TM6000_ALSA=m CONFIG_VIDEO_TM6000_DVB=m # # Digital TV USB devices # CONFIG_DVB_USB=m # CONFIG_DVB_USB_DEBUG is not set CONFIG_DVB_USB_DIB3000MC=m CONFIG_DVB_USB_A800=m CONFIG_DVB_USB_DIBUSB_MB=m CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y CONFIG_DVB_USB_DIBUSB_MC=m CONFIG_DVB_USB_DIB0700=m CONFIG_DVB_USB_UMT_010=m CONFIG_DVB_USB_CXUSB=m CONFIG_DVB_USB_M920X=m CONFIG_DVB_USB_DIGITV=m CONFIG_DVB_USB_VP7045=m CONFIG_DVB_USB_VP702X=m CONFIG_DVB_USB_GP8PSK=m CONFIG_DVB_USB_NOVA_T_USB2=m CONFIG_DVB_USB_TTUSB2=m CONFIG_DVB_USB_DTT200U=m CONFIG_DVB_USB_OPERA1=m # CONFIG_DVB_USB_AF9005 is not set CONFIG_DVB_USB_PCTV452E=m CONFIG_DVB_USB_DW2102=m CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_DTV5100=m CONFIG_DVB_USB_FRIIO=m CONFIG_DVB_USB_AZ6027=m CONFIG_DVB_USB_TECHNISAT_USB2=m CONFIG_DVB_USB_V2=m CONFIG_DVB_USB_AF9015=m CONFIG_DVB_USB_AF9035=m CONFIG_DVB_USB_ANYSEE=m CONFIG_DVB_USB_AU6610=m CONFIG_DVB_USB_AZ6007=m CONFIG_DVB_USB_CE6230=m CONFIG_DVB_USB_EC168=m CONFIG_DVB_USB_GL861=m CONFIG_DVB_USB_LME2510=m CONFIG_DVB_USB_MXL111SF=m CONFIG_DVB_USB_RTL28XXU=m # CONFIG_DVB_USB_DVBSKY is not set # CONFIG_DVB_USB_ZD1301 is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m CONFIG_SMS_USB_DRV=m CONFIG_DVB_B2C2_FLEXCOP_USB=m # CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set # CONFIG_DVB_AS102 is not set # # Webcam, TV (analog/digital) USB devices # CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_EM28XX_V4L2=m CONFIG_VIDEO_EM28XX_ALSA=m CONFIG_VIDEO_EM28XX_DVB=m CONFIG_VIDEO_EM28XX_RC=m # # Software defined radio USB devices # # CONFIG_USB_AIRSPY is not set # CONFIG_USB_HACKRF is not set # CONFIG_USB_MSI2500 is not set CONFIG_MEDIA_PCI_SUPPORT=y # # Media capture support # # CONFIG_VIDEO_SOLO6X10 is not set # CONFIG_VIDEO_TW5864 is not set # CONFIG_VIDEO_TW68 is not set # CONFIG_VIDEO_TW686X is not set # # Media capture/analog TV support # CONFIG_VIDEO_IVTV=m # CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set CONFIG_VIDEO_IVTV_ALSA=m CONFIG_VIDEO_FB_IVTV=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_MXB=m # CONFIG_VIDEO_DT3155 is not set # # Media capture/analog/hybrid TV support # CONFIG_VIDEO_CX18=m CONFIG_VIDEO_CX18_ALSA=m CONFIG_VIDEO_CX23885=m CONFIG_MEDIA_ALTERA_CI=m CONFIG_VIDEO_CX25821=m CONFIG_VIDEO_CX25821_ALSA=m CONFIG_VIDEO_CX88=m CONFIG_VIDEO_CX88_ALSA=m CONFIG_VIDEO_CX88_BLACKBIRD=m CONFIG_VIDEO_CX88_DVB=m CONFIG_VIDEO_CX88_ENABLE_VP3054=y CONFIG_VIDEO_CX88_VP3054=m CONFIG_VIDEO_CX88_MPEG=m CONFIG_VIDEO_BT848=m CONFIG_DVB_BT8XX=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_RC=y CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_SAA7164=m # # Media digital TV PCI Adapters # CONFIG_DVB_AV7110_IR=y CONFIG_DVB_AV7110=m # CONFIG_DVB_AV7110_OSD is not set CONFIG_DVB_BUDGET_CORE=m CONFIG_DVB_BUDGET=m CONFIG_DVB_BUDGET_CI=m CONFIG_DVB_BUDGET_AV=m CONFIG_DVB_BUDGET_PATCH=m CONFIG_DVB_B2C2_FLEXCOP_PCI=m # CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set CONFIG_DVB_PLUTO2=m CONFIG_DVB_DM1105=m CONFIG_DVB_PT1=m # CONFIG_DVB_PT3 is not set CONFIG_MANTIS_CORE=m CONFIG_DVB_MANTIS=m CONFIG_DVB_HOPPER=m CONFIG_DVB_NGENE=m CONFIG_DVB_DDBRIDGE=m # CONFIG_DVB_DDBRIDGE_MSIENABLE is not set # CONFIG_DVB_SMIPCIE is not set # CONFIG_DVB_NETUP_UNIDVB is not set CONFIG_V4L_PLATFORM_DRIVERS=y # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_SOC_CAMERA is not set # CONFIG_V4L_MEM2MEM_DRIVERS is not set CONFIG_V4L_TEST_DRIVERS=y # CONFIG_VIDEO_VIVID is not set # CONFIG_VIDEO_VIM2M is not set # CONFIG_DVB_PLATFORM_DRIVERS is not set # CONFIG_SDR_PLATFORM_DRIVERS is not set # # Supported MMC/SDIO adapters # # CONFIG_SMS_SDIO_DRV is not set CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_TEA575X=m CONFIG_RADIO_SI470X=y CONFIG_USB_SI470X=m CONFIG_I2C_SI470X=m CONFIG_RADIO_SI4713=m CONFIG_USB_SI4713=m CONFIG_PLATFORM_SI4713=m CONFIG_I2C_SI4713=m CONFIG_USB_MR800=m CONFIG_USB_DSBR=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_SHARK=m CONFIG_RADIO_SHARK2=m CONFIG_USB_KEENE=m CONFIG_USB_RAREMONO=m CONFIG_USB_MA901=m CONFIG_RADIO_TEA5764=m CONFIG_RADIO_SAA7706H=m CONFIG_RADIO_TEF6862=m CONFIG_RADIO_WL1273=m # # Texas Instruments WL128x FM driver (ST based) # # # Supported FireWire (IEEE 1394) Adapters # # CONFIG_DVB_FIREDTV is not set CONFIG_MEDIA_COMMON_OPTIONS=y # # common driver options # CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_TVEEPROM=m CONFIG_CYPRESS_FIRMWARE=m CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_V4L2=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEOBUF2_DMA_SG=m CONFIG_VIDEOBUF2_DVB=m CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y # # Media ancillary drivers (tuners, sensors, i2c, spi, frontends) # CONFIG_MEDIA_SUBDRV_AUTOSELECT=y CONFIG_MEDIA_ATTACH=y CONFIG_VIDEO_IR_I2C=m # # Audio decoders, processors and mixers # CONFIG_VIDEO_TVAUDIO=m CONFIG_VIDEO_TDA7432=m CONFIG_VIDEO_TDA9840=m CONFIG_VIDEO_TEA6415C=m CONFIG_VIDEO_TEA6420=m CONFIG_VIDEO_MSP3400=m CONFIG_VIDEO_CS3308=m CONFIG_VIDEO_CS5345=m CONFIG_VIDEO_CS53L32A=m CONFIG_VIDEO_WM8775=m CONFIG_VIDEO_WM8739=m CONFIG_VIDEO_VP27SMPX=m # # RDS decoders # CONFIG_VIDEO_SAA6588=m # # Video decoders # CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_TVP5150=m # # Video and audio decoders # CONFIG_VIDEO_SAA717X=m CONFIG_VIDEO_CX25840=m # # Video encoders # CONFIG_VIDEO_SAA7127=m # # Camera sensor devices # CONFIG_VIDEO_OV2640=m CONFIG_VIDEO_MT9V011=m # # Flash devices # # # Video improvement chips # CONFIG_VIDEO_UPD64031A=m CONFIG_VIDEO_UPD64083=m # # Audio/Video compression chips # CONFIG_VIDEO_SAA6752HS=m # # SDR tuner chips # # # Miscellaneous helper chips # CONFIG_VIDEO_M52790=m # # Sensors used on soc_camera driver # # # Media SPI Adapters # # CONFIG_CXD2880_SPI_DRV is not set CONFIG_MEDIA_TUNER=m CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA18250=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2063=m CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_XC4000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_MEDIA_TUNER_TDA18218=m CONFIG_MEDIA_TUNER_FC0011=m CONFIG_MEDIA_TUNER_FC0012=m CONFIG_MEDIA_TUNER_FC0013=m CONFIG_MEDIA_TUNER_TDA18212=m CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_M88RS6000T=m CONFIG_MEDIA_TUNER_TUA9001=m CONFIG_MEDIA_TUNER_SI2157=m CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_R820T=m CONFIG_MEDIA_TUNER_QM1D1C0042=m # # Multistandard (satellite) frontends # CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m CONFIG_DVB_STV090x=m CONFIG_DVB_STV0910=m CONFIG_DVB_STV6110x=m CONFIG_DVB_STV6111=m CONFIG_DVB_MXL5XX=m CONFIG_DVB_M88DS3103=m # # Multistandard (cable + terrestrial) frontends # CONFIG_DVB_DRXK=m CONFIG_DVB_TDA18271C2DD=m CONFIG_DVB_SI2165=m CONFIG_DVB_MN88472=m CONFIG_DVB_MN88473=m # # DVB-S (satellite) frontends # CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m CONFIG_DVB_ZL10036=m CONFIG_DVB_ZL10039=m CONFIG_DVB_S5H1420=m CONFIG_DVB_STV0288=m CONFIG_DVB_STB6000=m CONFIG_DVB_STV0299=m CONFIG_DVB_STV6110=m CONFIG_DVB_STV0900=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m CONFIG_DVB_TDA8261=m CONFIG_DVB_VES1X93=m CONFIG_DVB_TUNER_ITD1000=m CONFIG_DVB_TUNER_CX24113=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m CONFIG_DVB_CX24116=m CONFIG_DVB_CX24117=m CONFIG_DVB_CX24120=m CONFIG_DVB_SI21XX=m CONFIG_DVB_TS2020=m CONFIG_DVB_DS3000=m CONFIG_DVB_MB86A16=m CONFIG_DVB_TDA10071=m # # DVB-T (terrestrial) frontends # CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m CONFIG_DVB_DRXD=m CONFIG_DVB_L64781=m CONFIG_DVB_TDA1004X=m CONFIG_DVB_NXT6000=m CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m CONFIG_DVB_DIB3000MB=m CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m CONFIG_DVB_TDA10048=m CONFIG_DVB_AF9013=m CONFIG_DVB_EC100=m CONFIG_DVB_STV0367=m CONFIG_DVB_CXD2820R=m CONFIG_DVB_CXD2841ER=m CONFIG_DVB_RTL2830=m CONFIG_DVB_RTL2832=m CONFIG_DVB_RTL2832_SDR=m CONFIG_DVB_SI2168=m CONFIG_DVB_GP8PSK_FE=m # # DVB-C (cable) frontends # CONFIG_DVB_VES1820=m CONFIG_DVB_TDA10021=m CONFIG_DVB_TDA10023=m CONFIG_DVB_STV0297=m # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_NXT200X=m CONFIG_DVB_OR51211=m CONFIG_DVB_OR51132=m CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m CONFIG_DVB_LGDT3305=m CONFIG_DVB_LGDT3306A=m CONFIG_DVB_LG2160=m CONFIG_DVB_S5H1409=m CONFIG_DVB_AU8522=m CONFIG_DVB_AU8522_DTV=m CONFIG_DVB_AU8522_V4L=m CONFIG_DVB_S5H1411=m # # ISDB-T (terrestrial) frontends # CONFIG_DVB_S921=m CONFIG_DVB_DIB8000=m CONFIG_DVB_MB86A20S=m # # ISDB-S (satellite) & ISDB-T (terrestrial) frontends # CONFIG_DVB_TC90522=m # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=m CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_TUNER_DIB0090=m # # SEC control devices for DVB-S # CONFIG_DVB_DRX39XYJ=m CONFIG_DVB_LNBH25=m CONFIG_DVB_LNBP21=m CONFIG_DVB_LNBP22=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m CONFIG_DVB_ISL6423=m CONFIG_DVB_A8293=m CONFIG_DVB_LGS8GXX=m CONFIG_DVB_ATBM8830=m CONFIG_DVB_TDA665x=m CONFIG_DVB_IX2505V=m CONFIG_DVB_M88RS2000=m CONFIG_DVB_AF9033=m # # Common Interface (EN50221) controller drivers # CONFIG_DVB_CXD2099=m # # Tools to develop new frontends # # # Graphics support # # CONFIG_AGP is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=3 CONFIG_DRM=y # CONFIG_DRM_DP_AUX_CHARDEV is not set # CONFIG_DRM_DEBUG_MM is not set # CONFIG_DRM_DEBUG_MM_SELFTEST is not set CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_KMS_FB_HELPER=y CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set CONFIG_DRM_TTM=y # # I2C encoder or helper chips # # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_RADEON_USERPTR is not set # CONFIG_DRM_AMDGPU is not set # # ACP (Audio CoProcessor) Configuration # # # AMD Library routines # # CONFIG_DRM_NOUVEAU is not set CONFIG_DRM_VGEM=m # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set # CONFIG_DRM_MGAG200 is not set CONFIG_DRM_CIRRUS_QEMU=y # CONFIG_DRM_RCAR_DW_HDMI is not set # CONFIG_DRM_RCAR_LVDS is not set CONFIG_DRM_QXL=y CONFIG_DRM_BOCHS=y CONFIG_DRM_VIRTIO_GPU=y CONFIG_DRM_PANEL=y # # Display Panels # # CONFIG_DRM_PANEL_LVDS is not set # CONFIG_DRM_PANEL_SIMPLE is not set # CONFIG_DRM_PANEL_ILITEK_IL9322 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set # CONFIG_DRM_PANEL_LG_LG4573 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set # CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set # CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # # CONFIG_DRM_ANALOGIX_ANX78XX is not set # CONFIG_DRM_DUMB_VGA_DAC is not set # CONFIG_DRM_LVDS_ENCODER is not set # CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set # CONFIG_DRM_NXP_PTN3460 is not set # CONFIG_DRM_PARADE_PS8622 is not set # CONFIG_DRM_SIL_SII8620 is not set # CONFIG_DRM_SII902X is not set # CONFIG_DRM_SII9234 is not set # CONFIG_DRM_TOSHIBA_TC358767 is not set # CONFIG_DRM_TI_TFP410 is not set # CONFIG_DRM_I2C_ADV7511 is not set # CONFIG_DRM_ARCPGU is not set # CONFIG_DRM_HISI_HIBMC is not set # CONFIG_DRM_MXSFB is not set # CONFIG_DRM_TINYDRM is not set # CONFIG_DRM_LEGACY is not set CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y # # Frame buffer Devices # CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_OF is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_OPENCORES is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_FSL_DIU is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set # CONFIG_FB_SIMPLE is not set # CONFIG_FB_SSD1307 is not set # CONFIG_FB_SM712 is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI922X is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set # CONFIG_LCD_S6E63M0 is not set # CONFIG_LCD_LD9040 is not set # CONFIG_LCD_AMS369FG06 is not set # CONFIG_LCD_LMS501KF03 is not set # CONFIG_LCD_HX8357 is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y # CONFIG_BACKLIGHT_PM8941_WLED is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_GPIO is not set # CONFIG_BACKLIGHT_LV5207LP is not set # CONFIG_BACKLIGHT_BD6107 is not set # CONFIG_BACKLIGHT_ARCXCNN is not set CONFIG_HDMI=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_SEQ_DEVICE=y CONFIG_SND_RAWMIDI=y CONFIG_SND_JACK=y CONFIG_SND_JACK_INPUT_DEV=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_PCM_TIMER=y CONFIG_SND_HRTIMER=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_PROC_FS=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_PCM_XRUN_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_SEQUENCER=y CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_SEQ_MIDI_EVENT=y CONFIG_SND_SEQ_MIDI=y CONFIG_SND_SEQ_MIDI_EMUL=y CONFIG_SND_SEQ_VIRMIDI=y CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y CONFIG_SND_OPL3_LIB_SEQ=y CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m CONFIG_SND_ALOOP=m CONFIG_SND_VIRMIDI=y CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=m CONFIG_SND_CMIPCI=y CONFIG_SND_OXYGEN_LIB=m CONFIG_SND_OXYGEN=m # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set CONFIG_SND_CTXFI=m # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set CONFIG_SND_EMU10K1=y CONFIG_SND_EMU10K1_SEQ=y CONFIG_SND_EMU10K1X=y CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m # CONFIG_SND_ES1968_INPUT is not set # CONFIG_SND_ES1968_RADIO is not set CONFIG_SND_FM801=y # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set CONFIG_SND_ICE1712=y CONFIG_SND_ICE1724=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LOLA is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # # HD-Audio # CONFIG_SND_HDA=y CONFIG_SND_HDA_INTEL=y CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_ANALOG=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_SIGMATEL=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_VIA=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CIRRUS=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_CONEXANT=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_CA0110=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_CA0132=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_CA0132_DSP=y CONFIG_SND_HDA_CODEC_CMEDIA=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_CODEC_SI3054=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_GENERIC=m # # Set to Y if you want auto-loading the codec driver # CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_HDA_CORE=y CONFIG_SND_HDA_DSP_LOADER=y CONFIG_SND_HDA_PREALLOC_SIZE=64 # CONFIG_SND_PPC is not set # CONFIG_SND_SPI is not set CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_USB_UA101=y CONFIG_SND_USB_USX2Y=y CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_6FIRE=m CONFIG_SND_USB_HIFACE=m CONFIG_SND_BCD2000=m CONFIG_SND_USB_LINE6=m CONFIG_SND_USB_POD=m CONFIG_SND_USB_PODHD=m CONFIG_SND_USB_TONEPORT=m CONFIG_SND_USB_VARIAX=m CONFIG_SND_FIREWIRE=y # CONFIG_SND_DICE is not set # CONFIG_SND_OXFW is not set # CONFIG_SND_ISIGHT is not set # CONFIG_SND_FIREWORKS is not set # CONFIG_SND_BEBOB is not set # CONFIG_SND_FIREWIRE_DIGI00X is not set # CONFIG_SND_FIREWIRE_TASCAM is not set # CONFIG_SND_FIREWIRE_MOTU is not set # CONFIG_SND_FIREFACE is not set # CONFIG_SND_SOC is not set CONFIG_SND_SYNTH_EMUX=y CONFIG_AC97_BUS=y # # HID support # CONFIG_HID=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_HIDRAW=y CONFIG_UHID=y CONFIG_HID_GENERIC=y # # Special HID drivers # CONFIG_HID_A4TECH=y # CONFIG_HID_ACCUTOUCH is not set # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y # CONFIG_HID_APPLEIR is not set # CONFIG_HID_ASUS is not set # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y # CONFIG_HID_BETOP_FF is not set CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y # CONFIG_HID_CORSAIR is not set # CONFIG_HID_PRODIKEYS is not set # CONFIG_HID_CMEDIA is not set # CONFIG_HID_CP2112 is not set CONFIG_HID_CYPRESS=y # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_ELAN is not set # CONFIG_HID_ELECOM is not set # CONFIG_HID_ELO is not set CONFIG_HID_EZKEY=y # CONFIG_HID_GEMBIRD is not set # CONFIG_HID_GFRM is not set # CONFIG_HID_HOLTEK is not set # CONFIG_HID_GOOGLE_HAMMER is not set # CONFIG_HID_GT683R is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_ICADE is not set # CONFIG_HID_ITE is not set # CONFIG_HID_JABRA is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LED is not set # CONFIG_HID_LENOVO is not set CONFIG_HID_LOGITECH=y CONFIG_HID_LOGITECH_DJ=y CONFIG_HID_LOGITECH_HIDPP=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set # CONFIG_HID_MAGICMOUSE is not set # CONFIG_HID_MAYFLASH is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTI is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PENMOUNT is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set CONFIG_HID_PLANTRONICS=m # CONFIG_HID_PRIMAX is not set # CONFIG_HID_RETRODE is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set CONFIG_HID_SPEEDLINK=m # CONFIG_HID_STEELSERIES is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_RMI is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THINGM is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_UDRAW_PS3 is not set CONFIG_HID_WACOM=m # CONFIG_HID_WIIMOTE is not set # CONFIG_HID_XINMO is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # CONFIG_HID_ALPS is not set # # USB HID support # CONFIG_USB_HID=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_LEDS_TRIGGER_USBPORT=y CONFIG_USB_MON=y # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y # CONFIG_USB_XHCI_DBGCAP is not set CONFIG_USB_XHCI_PCI=y CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_FOTG210_HCD is not set # CONFIG_USB_MAX3421_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y # CONFIG_USB_OHCI_HCD_PLATFORM is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_BCMA is not set # CONFIG_USB_HCD_SSB is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_WDM=m # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # CONFIG_USB_UAS is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USBIP_CORE is not set # CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_DWC2 is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_AIRCABLE=m # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set CONFIG_USB_SERIAL_IR=m # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_F81232 is not set # CONFIG_USB_SERIAL_F8153X is not set CONFIG_USB_SERIAL_GARMIN=m # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_METRO is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MXUPORT is not set CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_SAFE is not set CONFIG_USB_SERIAL_SIERRAWIRELESS=m # CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_XSENS_MT is not set # CONFIG_USB_SERIAL_WISHBONE is not set # CONFIG_USB_SERIAL_SSU100 is not set # CONFIG_USB_SERIAL_QT2 is not set # CONFIG_USB_SERIAL_UPD78F0730 is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set CONFIG_USB_TRANCEVIBRATOR=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set # CONFIG_USB_HUB_USB251XB is not set # CONFIG_USB_HSIC_USB3503 is not set # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set # CONFIG_USB_CHAOSKEY is not set # CONFIG_USB_ATM is not set # # USB Physical Layer drivers # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set # CONFIG_USB_GADGET is not set # CONFIG_TYPEC is not set CONFIG_USB_LED_TRIG=y CONFIG_USB_ULPI_BUS=y # CONFIG_UWB is not set CONFIG_MMC=y CONFIG_PWRSEQ_EMMC=y # CONFIG_PWRSEQ_SD8787 is not set CONFIG_PWRSEQ_SIMPLE=y CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=8 # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_DEBUG is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_PCI=y CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_PLTFM=y # CONFIG_MMC_SDHCI_OF_ARASAN is not set # CONFIG_MMC_SDHCI_OF_AT91 is not set CONFIG_MMC_SDHCI_OF_ESDHC=y # CONFIG_MMC_SDHCI_OF_HLWD is not set # CONFIG_MMC_SDHCI_CADENCE is not set # CONFIG_MMC_SDHCI_F_SDH30 is not set # CONFIG_MMC_WBSD is not set # CONFIG_MMC_TIFM_SD is not set # CONFIG_MMC_SPI is not set # CONFIG_MMC_CB710 is not set # CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set # CONFIG_MMC_USDHI6ROL0 is not set CONFIG_MMC_CQHCI=y # CONFIG_MMC_TOSHIBA_PCI is not set # CONFIG_MMC_MTK is not set # CONFIG_MMC_SDHCI_XENON is not set # CONFIG_MMC_SDHCI_OMAP is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set # # LED drivers # # CONFIG_LEDS_AS3645A is not set # CONFIG_LEDS_BCM6328 is not set # CONFIG_LEDS_BCM6358 is not set # CONFIG_LEDS_LM3530 is not set # CONFIG_LEDS_LM3642 is not set # CONFIG_LEDS_LM3692X is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_LP3952 is not set # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_LP5523 is not set # CONFIG_LEDS_LP5562 is not set # CONFIG_LEDS_LP8501 is not set # CONFIG_LEDS_LP8860 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_PCA963X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_TLC591XX is not set # CONFIG_LEDS_LM355x is not set # CONFIG_LEDS_KTD2692 is not set # CONFIG_LEDS_IS31FL319X is not set # CONFIG_LEDS_IS31FL32XX is not set # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # # CONFIG_LEDS_BLINKM is not set # CONFIG_LEDS_MLXREG is not set # CONFIG_LEDS_USER is not set # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_DISK=y # CONFIG_LEDS_TRIGGER_MTD is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_CPU=y # CONFIG_LEDS_TRIGGER_ACTIVITY is not set CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=y # CONFIG_LEDS_TRIGGER_CAMERA is not set # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_LEDS_TRIGGER_NETDEV is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set # CONFIG_EDAC_MPC85XX is not set # CONFIG_EDAC_CPC925 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_SYSTOHC=y CONFIG_RTC_SYSTOHC_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set CONFIG_RTC_NVMEM=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_ABB5ZES3 is not set # CONFIG_RTC_DRV_ABX80X is not set CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1307_HWMON=y # CONFIG_RTC_DRV_DS1307_CENTURY is not set CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_DS1374_WDT is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_HYM8563 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_ISL12026 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF85063 is not set # CONFIG_RTC_DRV_PCF85363 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8010 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV8803 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1302 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_DS1347 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6916 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RX4581 is not set # CONFIG_RTC_DRV_RX6110 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_MCP795 is not set CONFIG_RTC_I2C_AND_SPI=y # # SPI and I2C RTC drivers # # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1685_FAMILY is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DS2404 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_ZYNQMP is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_GENERIC is not set # CONFIG_RTC_DRV_FTRTC010 is not set # CONFIG_RTC_DRV_SNVS is not set # CONFIG_RTC_DRV_R7301 is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y CONFIG_DMA_ENGINE=y CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DMA_OF=y # CONFIG_ALTERA_MSGDMA is not set # CONFIG_DW_AXI_DMAC is not set CONFIG_FSL_DMA=y CONFIG_FSL_EDMA=y # CONFIG_INTEL_IDMA64 is not set # CONFIG_QCOM_HIDMA_MGMT is not set # CONFIG_QCOM_HIDMA is not set # CONFIG_DW_DMAC is not set # CONFIG_DW_DMAC_PCI is not set # # DMA Clients # CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set # # DMABUF options # CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=m # CONFIG_UIO_CIF is not set CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_DMEM_GENIRQ=m # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set CONFIG_UIO_PCI_GENERIC=m # CONFIG_UIO_NETX is not set # CONFIG_UIO_FSL_ELBC_GPCM is not set # CONFIG_UIO_PRUSS is not set # CONFIG_UIO_MF624 is not set CONFIG_IRQ_BYPASS_MANAGER=y CONFIG_VIRT_DRIVERS=y CONFIG_FSL_HV_MANAGER=y CONFIG_VIRTIO=y CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_PCI_LEGACY=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_INPUT=y CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # # Common Clock Framework # # CONFIG_CLK_HSDK is not set # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_SI514 is not set # CONFIG_COMMON_CLK_SI544 is not set # CONFIG_COMMON_CLK_SI570 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_CDCE925 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set CONFIG_CLK_QORIQ=y # CONFIG_COMMON_CLK_VC5 is not set # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # CONFIG_MAILBOX=y # CONFIG_PLATFORM_MHU is not set CONFIG_ALTERA_MBOX=y # CONFIG_MAILBOX_TEST is not set CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # # CONFIG_FSL_PAMU is not set # # Remoteproc drivers # # CONFIG_REMOTEPROC is not set # # Rpmsg drivers # CONFIG_RPMSG=y # CONFIG_RPMSG_CHAR is not set # CONFIG_RPMSG_QCOM_GLINK_RPM is not set CONFIG_RPMSG_VIRTIO=y # CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers # # # Amlogic SoC drivers # # # Broadcom SoC drivers # CONFIG_FSL_DPAA=y # CONFIG_FSL_DPAA_CHECKING is not set # CONFIG_FSL_BMAN_TEST is not set # CONFIG_FSL_QMAN_TEST is not set CONFIG_FSL_GUTS=y # # i.MX SoC drivers # # # Qualcomm SoC drivers # # CONFIG_SOC_TI is not set # # Xilinx SoC drivers # # CONFIG_XILINX_VCU is not set CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y CONFIG_DEVFREQ_GOV_PASSIVE=y # # DEVFREQ Drivers # CONFIG_PM_DEVFREQ_EVENT=y # CONFIG_EXTCON is not set CONFIG_MEMORY=y CONFIG_FSL_CORENET_CF=y CONFIG_FSL_IFC=y # CONFIG_IIO is not set # CONFIG_NTB is not set # CONFIG_VME_BUS is not set # CONFIG_PWM is not set # # IRQ chip support # CONFIG_IRQCHIP=y CONFIG_ARM_GIC_MAX_NR=1 # CONFIG_IPACK_BUS is not set CONFIG_RESET_CONTROLLER=y # CONFIG_RESET_TI_SYSCON is not set # CONFIG_FMC is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set # CONFIG_PHY_MAPPHONE_MDM6600 is not set # CONFIG_PHY_QCOM_USB_HS is not set # CONFIG_PHY_QCOM_USB_HSIC is not set # CONFIG_PHY_TUSB1210 is not set CONFIG_POWERCAP=y # CONFIG_MCB is not set # # Performance monitor support # CONFIG_RAS=y # # Android # # CONFIG_ANDROID is not set # CONFIG_LIBNVDIMM is not set CONFIG_DAX=y CONFIG_NVMEM=y # # HW tracing support # # CONFIG_STM is not set # CONFIG_INTEL_TH is not set # CONFIG_FPGA is not set # CONFIG_FSI is not set CONFIG_PM_OPP=y # CONFIG_SIOX is not set # CONFIG_SLIMBUS is not set # # File systems # CONFIG_FS_IOMAP=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_EXT4_ENCRYPTION=y CONFIG_EXT4_FS_ENCRYPTION=y CONFIG_EXT4_DEBUG=y CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_ONLINE_SCRUB is not set # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m # CONFIG_OCFS2_FS is not set CONFIG_BTRFS_FS=y # CONFIG_BTRFS_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set # CONFIG_BTRFS_FS_REF_VERIFY is not set CONFIG_NILFS2_FS=m CONFIG_F2FS_FS=m CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y # CONFIG_F2FS_FS_SECURITY is not set # CONFIG_F2FS_CHECK_FS is not set # CONFIG_F2FS_FS_ENCRYPTION is not set # CONFIG_F2FS_FAULT_INJECTION is not set # CONFIG_FS_DAX is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y # CONFIG_EXPORTFS_BLOCK_OPS is not set CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y CONFIG_FS_ENCRYPTION=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y # CONFIG_QUOTA is not set # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y # CONFIG_CUSE is not set CONFIG_OVERLAY_FS=y # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y # CONFIG_OVERLAY_FS_INDEX is not set # CONFIG_OVERLAY_FS_XINO_AUTO is not set # # Caches # CONFIG_FSCACHE=y # CONFIG_FSCACHE_STATS is not set # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set # CONFIG_FSCACHE_OBJECT_LIST is not set CONFIG_CACHEFILES=y # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_FAT_DEFAULT_UTF8 is not set CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y # CONFIG_PROC_CHILDREN is not set CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y # CONFIG_HUGETLBFS is not set CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m CONFIG_ECRYPT_FS=m # CONFIG_ECRYPT_FS_MESSAGING is not set CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_HFSPLUS_FS_POSIX_ACL=y CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFFS2_FS_SECURITY=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_UBIFS_FS is not set CONFIG_CRAMFS=m CONFIG_CRAMFS_BLOCKDEV=y # CONFIG_CRAMFS_MTD is not set CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_FILE_CACHE is not set CONFIG_SQUASHFS_FILE_DIRECT=y CONFIG_SQUASHFS_DECOMP_SINGLE=y # CONFIG_SQUASHFS_DECOMP_MULTI is not set # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_ZSTD is not set CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y CONFIG_SQUASHFS_EMBEDDED=y CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_QNX4FS_FS=m # CONFIG_QNX6FS_FS is not set CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y # CONFIG_ROMFS_BACKED_BY_MTD is not set # CONFIG_ROMFS_BACKED_BY_BOTH is not set CONFIG_ROMFS_ON_BLOCK=y # CONFIG_PSTORE is not set CONFIG_SYSV_FS=y CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V2=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_SWAP is not set CONFIG_ROOT_NFS=y # CONFIG_NFS_FSCACHE is not set # CONFIG_NFSD is not set CONFIG_GRACE_PERIOD=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_SUNRPC_DEBUG is not set # CONFIG_CEPH_FS is not set CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set CONFIG_CIFS_DEBUG=y # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_DEBUG_DUMP_KEYS is not set # CONFIG_CIFS_DFS_UPCALL is not set CONFIG_CIFS_SMB311=y # CONFIG_CIFS_FSCACHE is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Library routines # CONFIG_RAID6_PQ=y CONFIG_BITREVERSE=y CONFIG_RATIONAL=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC32_SELFTEST=y CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC4 is not set CONFIG_CRC7=m CONFIG_LIBCRC32C=y CONFIG_CRC8=m CONFIG_XXHASH=y # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_COMPRESS=y CONFIG_LZ4_DECOMPRESS=y CONFIG_ZSTD_COMPRESS=y CONFIG_ZSTD_DECOMPRESS=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set CONFIG_XZ_DEC_POWERPC=y # CONFIG_XZ_DEC_IA64 is not set # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_INTERVAL_TREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_SGL_ALLOC=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_CLZ_TAB=y CONFIG_CORDIC=m CONFIG_DDR=y CONFIG_IRQ_POLL=y CONFIG_MPILIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_FONT_SUPPORT=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_6x10 is not set # CONFIG_FONT_10x18 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set CONFIG_SG_POOL=y CONFIG_ARCH_HAS_SG_CHAIN=y CONFIG_ARCH_HAS_PMEM_API=y CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y CONFIG_SBITMAP=y # CONFIG_STRING_SELFTEST is not set # # Kernel hacking # # # printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_DYNAMIC_DEBUG is not set # # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_PAGE_OWNER is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 CONFIG_MAGIC_SYSRQ_SERIAL=y CONFIG_DEBUG_KERNEL=y # # Memory Debugging # CONFIG_PAGE_EXTENSION=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_PAGE_POISONING is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # # CONFIG_SOFTLOCKUP_DETECTOR is not set # CONFIG_HARDLOCKUP_DETECTOR is not set # CONFIG_DETECT_HUNG_TASK is not set # CONFIG_WQ_WATCHDOG is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_SCHED_STACK_END_CHECK is not set # CONFIG_DEBUG_TIMEKEEPING is not set # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_LOCK_DEBUGGING_SUPPORT=y # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_LOCK_TORTURE_TEST is not set # CONFIG_WW_MUTEX_SELFTEST is not set # CONFIG_STACKTRACE is not set # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_RCU_PERF_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_RCU_TRACE=y # CONFIG_RCU_EQS_DEBUG is not set # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_TRACE_CLOCK=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_RUNTIME_TESTING_MENU is not set # CONFIG_MEMTEST is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y # CONFIG_UBSAN is not set CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y CONFIG_STRICT_DEVMEM=y # CONFIG_IO_STRICT_DEVMEM is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 CONFIG_PPC_EMULATED_STATS=y # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set # CONFIG_XMON is not set # CONFIG_PPC_EARLY_DEBUG is not set # CONFIG_PPC_PTDUMP is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_COMPAT=y # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_BIG_KEYS is not set # CONFIG_TRUSTED_KEYS is not set CONFIG_ENCRYPTED_KEYS=y # CONFIG_KEY_DH_OPERATIONS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set CONFIG_SECURITYFS=y CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y # CONFIG_HARDENED_USERCOPY is not set # CONFIG_FORTIFY_SOURCE is not set # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_ASYNC_PQ=y CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_KPP=m CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_RSA=y # CONFIG_CRYPTO_DH is not set CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y # CONFIG_CRYPTO_CHACHA20POLY1305 is not set CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_ECHAINIV=y # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CFB is not set CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_PCBC is not set CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_KEYWRAP=m # # Hash modes # CONFIG_CRYPTO_CMAC=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_GHASH=y # CONFIG_CRYPTO_POLY1305 is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MD5_PPC is not set CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set CONFIG_CRYPTO_RMD160=m # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1_PPC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_SHA3 is not set # CONFIG_CRYPTO_SM3 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_CHACHA20 is not set # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_SERPENT=m # CONFIG_CRYPTO_SM4 is not set # CONFIG_CRYPTO_SPECK is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_842 is not set CONFIG_CRYPTO_LZ4=y # CONFIG_CRYPTO_LZ4HC is not set # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_HASH=y CONFIG_CRYPTO_DRBG_CTR=y CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_JITTERENTROPY=y CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_HASH_INFO=y # CONFIG_CRYPTO_HW is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y CONFIG_PKCS7_MESSAGE_PARSER=y # CONFIG_PKCS7_TEST_KEY is not set # CONFIG_SIGNED_PE_FILE_VERIFICATION is not set # # Certificates for signature checking # CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SECONDARY_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQFD=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_MMIO=y CONFIG_HAVE_KVM_MSI=y CONFIG_KVM_VFIO=y CONFIG_KVM_COMPAT=y CONFIG_HAVE_KVM_IRQ_BYPASS=y CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y CONFIG_KVM_BOOKE_HV=y # CONFIG_KVM_EXIT_TIMING is not set CONFIG_KVM_E500MC=y CONFIG_KVM_MPIC=y CONFIG_VHOST_NET=m CONFIG_VHOST=m # CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 11:50 ` Christian Zigotzky @ 2018-05-18 12:16 ` Greg Kurz 0 siblings, 0 replies; 35+ messages in thread From: Greg Kurz @ 2018-05-18 12:16 UTC (permalink / raw) To: Christian Zigotzky Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On Fri, 18 May 2018 13:50:42 +0200 Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > On 18 May 2018 at 1:13PM, Greg Kurz wrote: > > And of course your kernel should be built with virtio support. > I think I have enabled virtio support. Please find attached my kernel > config. > Indeed, what about passing root=/dev/vda3 to the kernel ? > -- Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 12:16 ` Greg Kurz 0 siblings, 0 replies; 35+ messages in thread From: Greg Kurz @ 2018-05-18 12:16 UTC (permalink / raw) To: Christian Zigotzky Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On Fri, 18 May 2018 13:50:42 +0200 Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > On 18 May 2018 at 1:13PM, Greg Kurz wrote: > > And of course your kernel should be built with virtio support. > I think I have enabled virtio support. Please find attached my kernel > config. > Indeed, what about passing root=/dev/vda3 to the kernel ? > -- Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 12:16 ` Greg Kurz @ 2018-05-18 12:33 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 12:33 UTC (permalink / raw) To: Greg Kurz; +Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18 May 2018 at 2:16PM, Greg Kurz wrote: > On Fri, 18 May 2018 13:50:42 +0200 > Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > >> On 18 May 2018 at 1:13PM, Greg Kurz wrote: >>> And of course your kernel should be built with virtio support. >> I think I have enabled virtio support. Please find attached my kernel >> config. >> > Indeed, what about passing root=/dev/vda3 to the kernel ? > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -drive file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -net nic,vlan=0,model=e1000 -net user,vlan=0 -append "rw root=/dev/vda3" -machine dt_compatible=fsl,,P5020DS or ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -device scsi-cd,drive=c1 -append "root=/dev/vda3" or ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -drive if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -append "root=/dev/vda3" Output: [ 0.000000] MMU: Supported page sizes [ 0.000000] 4 KB as direct [ 0.000000] 4096 KB as direct [ 0.000000] 16384 KB as direct [ 0.000000] 65536 KB as direct [ 0.000000] 262144 KB as direct [ 0.000000] 1048576 KB as direct [ 0.000000] MMU: Book3E HW tablewalk not supported [ 0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 [ 0.000000] Using CoreNet Generic machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x80000000 [ 0.000000] dcache_bsize = 0x40 [ 0.000000] icache_bsize = 0x40 [ 0.000000] cpu_features = 0x00000003008001b4 [ 0.000000] possible = 0x00000003009003b4 [ 0.000000] always = 0x00000003008003b4 [ 0.000000] cpu_user_features = 0xcc008000 0x08000000 [ 0.000000] mmu_features = 0x000a0010 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] CoreNet Generic board [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts [ 0.000000] percpu: Embedded 21 pages/cpu @ (ptrval) s48080 r0 d37936 u1048576 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 517120 [ 0.000000] Kernel command line: root=/dev/vda3 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1975688K/2097152K available (12088K kernel code, 2072K rwdata, 8172K rodata, 412K init, 727K bss, 121464K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at fe0040000, max 1 CPUs [ 0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff [ 0.000000] mpic: Initializing for 512 sources [ 0.000150] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns [ 0.000485] clocksource: timebase mult[2800000] shift[24] registered [ 0.004932] Console: colour dummy device 80x25 [ 0.005543] pid_max: default: 32768 minimum: 301 [ 0.006251] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.006441] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.021361] e500 family performance monitor hardware support registered [ 0.022294] Hierarchical SRCU implementation. [ 0.024402] smp: Bringing up secondary CPUs ... [ 0.024609] smp: Brought up 1 node, 1 CPU [ 0.024811] Using standard scheduler topology [ 0.030061] devtmpfs: initialized [ 0.033704] random: get_random_u32 called from .bucket_table_alloc+0x170/0x1c0 with crng_init=0 [ 0.035459] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.035764] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.037098] xor: measuring software checksum speed [ 0.046584] 8regs : 2620.000 MB/sec [ 0.056774] 8regs_prefetch: 2380.000 MB/sec [ 0.066974] 32regs : 2608.000 MB/sec [ 0.077165] 32regs_prefetch: 2360.000 MB/sec [ 0.077313] xor: using function: 8regs (2620.000 MB/sec) [ 0.087868] NET: Registered protocol family 16 [ 0.091070] cpuidle: using governor ladder [ 0.091259] cpuidle: using governor menu [ 0.097159] Machine: QEMU ppce500 [ 0.097258] SoC family: QorIQ [ 0.097343] SoC ID: svr:0x00000000, Revision: 0.0 [ 0.111905] PCI: Probing PCI hardware [ 0.216930] raid6: int64x1 gen() 1324 MB/s [ 0.234228] raid6: int64x1 xor() 845 MB/s [ 0.251545] raid6: int64x2 gen() 1718 MB/s [ 0.268864] raid6: int64x2 xor() 1275 MB/s [ 0.286186] raid6: int64x4 gen() 1800 MB/s [ 0.303854] raid6: int64x4 xor() 1316 MB/s [ 0.321316] raid6: int64x8 gen() 941 MB/s [ 0.338625] raid6: int64x8 xor() 781 MB/s [ 0.338752] raid6: using algorithm int64x4 gen() 1800 MB/s [ 0.338900] raid6: .... xor() 1316 MB/s, rmw enabled [ 0.339063] raid6: using intx1 recovery algorithm [ 0.339817] Freescale Elo series DMA driver [ 0.341262] vgaarb: loaded [ 0.342302] SCSI subsystem initialized [ 0.344113] usbcore: registered new interface driver usbfs [ 0.344428] usbcore: registered new interface driver hub [ 0.344684] usbcore: registered new device driver usb [ 0.345268] pps_core: LinuxPPS API ver. 1 registered [ 0.345404] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.345695] PTP clock support registered [ 0.348569] EDAC MC: Ver: 3.0.0 [ 0.351386] Advanced Linux Sound Architecture Driver Initialized. [ 0.355672] NET: Registered protocol family 8 [ 0.355814] NET: Registered protocol family 20 [ 0.359236] clocksource: Switched to clocksource timebase [ 0.361400] FS-Cache: Loaded [ 0.362211] CacheFiles: Loaded [ 0.390263] NET: Registered protocol family 2 [ 0.393486] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.393746] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.394154] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.394505] TCP: Hash tables configured (established 16384 bind 16384) [ 0.395361] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.395637] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.396638] NET: Registered protocol family 1 [ 0.399430] RPC: Registered named UNIX socket transport module. [ 0.399619] RPC: Registered udp transport module. [ 0.399743] RPC: Registered tcp transport module. [ 0.399867] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.406335] Initialise system trusted keyrings [ 0.408668] workingset: timestamp_bits=62 max_order=19 bucket_order=0 [ 0.416796] zbud: loaded [ 0.420149] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.436150] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.436705] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.438486] fuse init (API version 7.26) [ 0.451573] NET: Registered protocol family 38 [ 0.451885] async_tx: api initialized (async) [ 0.452277] Key type asymmetric registered [ 0.452455] Asymmetric key parser 'x509' registered [ 0.452880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.453203] io scheduler noop registered [ 0.453337] io scheduler deadline registered [ 0.453651] io scheduler cfq registered (default) [ 0.453798] io scheduler mq-deadline registered [ 0.453962] io scheduler kyber registered [ 0.455337] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.455484] crc32: self tests passed, processed 225944 bytes in 442445 nsec [ 0.456221] crc32c: CRC_LE_BITS = 64 [ 0.456327] crc32c: self tests passed, processed 225944 bytes in 226608 nsec [ 0.486173] crc32_combine: 8373 self tests passed [ 0.515206] crc32c_combine: 8373 self tests passed [ 0.689268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.694784] console [ttyS0] disabled [ 0.716358] serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, base_baud = 115200) is a 16550A [ 0.717314] console [ttyS0] enabled [ 0.717314] console [ttyS0] enabled [ 0.717686] bootconsole [udbg0] disabled [ 0.717686] bootconsole [udbg0] disabled [ 0.719049] ePAPR hypervisor byte channel driver [ 0.721125] [drm] radeon kernel modesetting enabled. [ 0.746621] brd: module loaded [ 0.759781] loop: module loaded [ 0.761701] zram: Added device: zram0 [ 0.771074] libphy: Fixed MDIO Bus: probed [ 0.772711] PPP generic driver version 2.4.2 [ 0.778222] PPP BSD Compression module registered [ 0.778382] PPP Deflate Compression module registered [ 0.778614] PPP MPPE Compression module registered [ 0.778763] NET: Registered protocol family 24 [ 0.780125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.780421] ehci-pci: EHCI PCI platform driver [ 0.780682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.781057] ohci-pci: OHCI PCI platform driver [ 0.781671] ehci-fsl: Freescale EHCI Host controller driver [ 0.781999] usbcore: registered new interface driver usblp [ 0.782258] usbcore: registered new interface driver usb-storage [ 0.782655] usbcore: registered new interface driver usbserial_generic [ 0.783005] usbserial: USB Serial support registered for generic [ 0.783247] usbcore: registered new interface driver ftdi_sio [ 0.783465] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.786824] mousedev: PS/2 mouse device common for all mice [ 0.787567] i2c /dev entries driver [ 0.793355] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 0.793900] sdhci: Secure Digital Host Controller Interface driver [ 0.794146] sdhci: Copyright(c) Pierre Ossman [ 0.794353] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.796047] ledtrig-cpu: registered to indicate activity on CPUs [ 0.796402] hidraw: raw HID events driver (C) Jiri Kosina [ 0.798040] usbcore: registered new interface driver usbhid [ 0.798199] usbhid: USB HID core driver [ 0.798403] Freescale hypervisor management driver [ 0.798544] fsl-hv: no hypervisor found [ 0.816356] usbcore: registered new interface driver snd-usb-audio [ 0.816614] usbcore: registered new interface driver snd-ua101 [ 0.816845] usbcore: registered new interface driver snd-usb-usx2y [ 0.817389] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 0.818797] IPv4 over IPsec tunneling driver [ 0.820198] Initializing XFRM netlink socket [ 0.821242] NET: Registered protocol family 10 [ 0.830017] Segment Routing with IPv6 [ 0.830723] mip6: Mobile IPv6 [ 0.832292] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.834447] NET: Registered protocol family 17 [ 0.834691] NET: Registered protocol family 15 [ 0.835396] lec:lane_module_init: lec.c: initialized [ 0.835567] mpoa:atm_mpoa_init: mpc.c: initialized [ 0.835763] l2tp_core: L2TP core driver, V2.0 [ 0.840489] DCCP: Activated CCID 2 (TCP-like) [ 0.840655] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 0.842064] sctp: Hash tables configured (bind 256/256) [ 0.847782] NET: Registered protocol family 21 [ 0.849268] Registered RDS/tcp transport [ 0.849399] tipc: Activated (version 2.0.0) [ 0.849674] NET: Registered protocol family 30 [ 0.851092] tipc: Started in single node mode [ 0.853171] Key type dns_resolver registered [ 0.854525] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility version 15) loaded [ 0.855060] drmem: No dynamic reconfiguration memory found [ 0.856447] Loading compiled-in X.509 certificates [ 0.857307] zswap: loaded using pool lzo/zbud [ 0.860584] Btrfs loaded, crc32c=crc32c-generic [ 0.863663] Key type encrypted registered [ 0.864688] hctosys: unable to open rtc device (rtc0) [ 0.865363] ALSA device list: [ 0.865462] #0: Virtual MIDI Card 1 [ 0.869543] md: Waiting for all devices to be available before autodetect [ 0.869723] md: If you don't use raid, use raid=noautodetect [ 0.872156] md: Autodetecting RAID arrays. [ 0.872294] md: autorun ... [ 0.872379] md: ... autorun DONE. [ 0.874278] VFS: Cannot open root device "vda3" or unknown-block(0,0): error -6 [ 0.874465] Please append a correct "root=" boot option; here are the available partitions: [ 0.874760] 0100 131072 ram0 [ 0.874792] (driver?) [ 0.875039] 0101 131072 ram1 [ 0.875045] (driver?) [ 0.875206] 0102 131072 ram2 [ 0.875211] (driver?) [ 0.875367] 0103 131072 ram3 [ 0.875371] (driver?) [ 0.875526] 0104 131072 ram4 [ 0.875530] (driver?) [ 0.875683] 0105 131072 ram5 [ 0.875687] (driver?) [ 0.875840] 0106 131072 ram6 [ 0.875844] (driver?) [ 0.876042] 0107 131072 ram7 [ 0.876047] (driver?) [ 0.876206] 0108 131072 ram8 [ 0.876210] (driver?) [ 0.876365] 0109 131072 ram9 [ 0.876369] (driver?) [ 0.876522] 010a 131072 ram10 [ 0.876526] (driver?) [ 0.876680] 010b 131072 ram11 [ 0.876684] (driver?) [ 0.876839] 010c 131072 ram12 [ 0.876843] (driver?) [ 0.877055] 010d 131072 ram13 [ 0.877060] (driver?) [ 0.877218] 010e 131072 ram14 [ 0.877222] (driver?) [ 0.877376] 010f 131072 ram15 [ 0.877380] (driver?) [ 0.877622] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.878241] Rebooting in 180 seconds.. ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 12:33 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 12:33 UTC (permalink / raw) To: Greg Kurz; +Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18 May 2018 at 2:16PM, Greg Kurz wrote: > On Fri, 18 May 2018 13:50:42 +0200 > Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > >> On 18 May 2018 at 1:13PM, Greg Kurz wrote: >>> And of course your kernel should be built with virtio support. >> I think I have enabled virtio support. Please find attached my kernel >> config. >> > Indeed, what about passing root=/dev/vda3 to the kernel ? > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -drive file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -net nic,vlan=0,modelá000 -net user,vlan=0 -append "rw root=/dev/vda3" -machine dt_compatible=fsl,,P5020DS or ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -device scsi-cd,driveÁ -append "root=/dev/vda3" or ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -machine dt_compatible=fsl,,P5020DS -drive if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img -append "root=/dev/vda3" Output: [   0.000000] MMU: Supported page sizes [   0.000000]         4 KB as direct [   0.000000]      4096 KB as direct [   0.000000]     16384 KB as direct [   0.000000]     65536 KB as direct [   0.000000]    262144 KB as direct [   0.000000]   1048576 KB as direct [   0.000000] MMU: Book3E HW tablewalk not supported [   0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 [   0.000000] Using CoreNet Generic machine description [   0.000000] bootconsole [udbg0] enabled [   0.000000] CPU maps initialized for 1 thread per core [   0.000000] ----------------------------------------------------- [   0.000000] phys_mem_size    = 0x80000000 [   0.000000] dcache_bsize     = 0x40 [   0.000000] icache_bsize     = 0x40 [   0.000000] cpu_features     = 0x00000003008001b4 [   0.000000]  possible       = 0x00000003009003b4 [   0.000000]  always         = 0x00000003008003b4 [   0.000000] cpu_user_features = 0xcc008000 0x08000000 [   0.000000] mmu_features     = 0x000a0010 [   0.000000] firmware_features = 0x0000000000000000 [   0.000000] ----------------------------------------------------- [   0.000000] CoreNet Generic board [   0.000000] Zone ranges: [   0.000000]  DMA     [mem 0x0000000000000000-0x000000007fffffff] [   0.000000]  DMA32   empty [   0.000000]  Normal  empty [   0.000000] Movable zone start for each node [   0.000000] Early memory node ranges [   0.000000]  node  0: [mem 0x0000000000000000-0x000000007fffffff] [   0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [   0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts [   0.000000] percpu: Embedded 21 pages/cpu @       (ptrval) s48080 r0 d37936 u1048576 [   0.000000] Built 1 zonelists, mobility grouping on. Total pages: 517120 [   0.000000] Kernel command line: root=/dev/vda3 [   0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [   0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [   0.000000] Memory: 1975688K/2097152K available (12088K kernel code, 2072K rwdata, 8172K rodata, 412K init, 727K bss, 121464K reserved, 0K cma-reserved) [   0.000000] SLUB: HWalignd, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [   0.000000] Hierarchical RCU implementation. [   0.000000]    RCU event tracing is enabled. [   0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [   0.000000] RCU: Adjusting geometry for rcu_fanout_leaf\x16, nr_cpu_ids=1 [   0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [   0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at fe0040000, max 1 CPUs [   0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff [   0.000000] mpic: Initializing for 512 sources [   0.000150] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns [   0.000485] clocksource: timebase mult[2800000] shift[24] registered [   0.004932] Console: colour dummy device 80x25 [   0.005543] pid_max: default: 32768 minimum: 301 [   0.006251] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [   0.006441] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [   0.021361] e500 family performance monitor hardware support registered [   0.022294] Hierarchical SRCU implementation. [   0.024402] smp: Bringing up secondary CPUs ... [   0.024609] smp: Brought up 1 node, 1 CPU [   0.024811] Using standard scheduler topology [   0.030061] devtmpfs: initialized [   0.033704] random: get_random_u32 called from .bucket_table_alloc+0x170/0x1c0 with crng_init=0 [   0.035459] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [   0.035764] futex hash table entries: 256 (order: 2, 16384 bytes) [   0.037098] xor: measuring software checksum speed [   0.046584]   8regs    : 2620.000 MB/sec [   0.056774]   8regs_prefetch: 2380.000 MB/sec [   0.066974]   32regs   : 2608.000 MB/sec [   0.077165]   32regs_prefetch: 2360.000 MB/sec [   0.077313] xor: using function: 8regs (2620.000 MB/sec) [   0.087868] NET: Registered protocol family 16 [   0.091070] cpuidle: using governor ladder [   0.091259] cpuidle: using governor menu [   0.097159] Machine: QEMU ppce500 [   0.097258] SoC family: QorIQ [   0.097343] SoC ID: svr:0x00000000, Revision: 0.0 [   0.111905] PCI: Probing PCI hardware [   0.216930] raid6: int64x1 gen() 1324 MB/s [   0.234228] raid6: int64x1 xor()  845 MB/s [   0.251545] raid6: int64x2 gen() 1718 MB/s [   0.268864] raid6: int64x2 xor() 1275 MB/s [   0.286186] raid6: int64x4 gen() 1800 MB/s [   0.303854] raid6: int64x4 xor() 1316 MB/s [   0.321316] raid6: int64x8 gen()  941 MB/s [   0.338625] raid6: int64x8 xor()  781 MB/s [   0.338752] raid6: using algorithm int64x4 gen() 1800 MB/s [   0.338900] raid6: .... xor() 1316 MB/s, rmw enabled [   0.339063] raid6: using intx1 recovery algorithm [   0.339817] Freescale Elo series DMA driver [   0.341262] vgaarb: loaded [   0.342302] SCSI subsystem initialized [   0.344113] usbcore: registered new interface driver usbfs [   0.344428] usbcore: registered new interface driver hub [   0.344684] usbcore: registered new device driver usb [   0.345268] pps_core: LinuxPPS API ver. 1 registered [   0.345404] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [   0.345695] PTP clock support registered [   0.348569] EDAC MC: Ver: 3.0.0 [   0.351386] Advanced Linux Sound Architecture Driver Initialized. [   0.355672] NET: Registered protocol family 8 [   0.355814] NET: Registered protocol family 20 [   0.359236] clocksource: Switched to clocksource timebase [   0.361400] FS-Cache: Loaded [   0.362211] CacheFiles: Loaded [   0.390263] NET: Registered protocol family 2 [   0.393486] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [   0.393746] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [   0.394154] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [   0.394505] TCP: Hash tables configured (established 16384 bind 16384) [   0.395361] UDP hash table entries: 1024 (order: 3, 32768 bytes) [   0.395637] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [   0.396638] NET: Registered protocol family 1 [   0.399430] RPC: Registered named UNIX socket transport module. [   0.399619] RPC: Registered udp transport module. [   0.399743] RPC: Registered tcp transport module. [   0.399867] RPC: Registered tcp NFSv4.1 backchannel transport module. [   0.406335] Initialise system trusted keyrings [   0.408668] workingset: timestamp_bitsb max_order\x19 bucket_order=0 [   0.416796] zbud: loaded [   0.420149] squashfs: version 4.0 (2009/01/31) Phillip Lougher [   0.436150] ntfs: driver 2.1.32 [Flags: R/W]. [   0.436705] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [   0.438486] fuse init (API version 7.26) [   0.451573] NET: Registered protocol family 38 [   0.451885] async_tx: api initialized (async) [   0.452277] Key type asymmetric registered [   0.452455] Asymmetric key parser 'x509' registered [   0.452880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [   0.453203] io scheduler noop registered [   0.453337] io scheduler deadline registered [   0.453651] io scheduler cfq registered (default) [   0.453798] io scheduler mq-deadline registered [   0.453962] io scheduler kyber registered [   0.455337] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [   0.455484] crc32: self tests passed, processed 225944 bytes in 442445 nsec [   0.456221] crc32c: CRC_LE_BITS = 64 [   0.456327] crc32c: self tests passed, processed 225944 bytes in 226608 nsec [   0.486173] crc32_combine: 8373 self tests passed [   0.515206] crc32c_combine: 8373 self tests passed [   0.689268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [   0.694784] console [ttyS0] disabled [   0.716358] serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, base_baud = 115200) is a 16550A [   0.717314] console [ttyS0] enabled [   0.717314] console [ttyS0] enabled [   0.717686] bootconsole [udbg0] disabled [   0.717686] bootconsole [udbg0] disabled [   0.719049] ePAPR hypervisor byte channel driver [   0.721125] [drm] radeon kernel modesetting enabled. [   0.746621] brd: module loaded [   0.759781] loop: module loaded [   0.761701] zram: Added device: zram0 [   0.771074] libphy: Fixed MDIO Bus: probed [   0.772711] PPP generic driver version 2.4.2 [   0.778222] PPP BSD Compression module registered [   0.778382] PPP Deflate Compression module registered [   0.778614] PPP MPPE Compression module registered [   0.778763] NET: Registered protocol family 24 [   0.780125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [   0.780421] ehci-pci: EHCI PCI platform driver [   0.780682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [   0.781057] ohci-pci: OHCI PCI platform driver [   0.781671] ehci-fsl: Freescale EHCI Host controller driver [   0.781999] usbcore: registered new interface driver usblp [   0.782258] usbcore: registered new interface driver usb-storage [   0.782655] usbcore: registered new interface driver usbserial_generic [   0.783005] usbserial: USB Serial support registered for generic [   0.783247] usbcore: registered new interface driver ftdi_sio [   0.783465] usbserial: USB Serial support registered for FTDI USB Serial Device [   0.786824] mousedev: PS/2 mouse device common for all mice [   0.787567] i2c /dev entries driver [   0.793355] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [   0.793900] sdhci: Secure Digital Host Controller Interface driver [   0.794146] sdhci: Copyright(c) Pierre Ossman [   0.794353] sdhci-pltfm: SDHCI platform and OF driver helper [   0.796047] ledtrig-cpu: registered to indicate activity on CPUs [   0.796402] hidraw: raw HID events driver (C) Jiri Kosina [   0.798040] usbcore: registered new interface driver usbhid [   0.798199] usbhid: USB HID core driver [   0.798403] Freescale hypervisor management driver [   0.798544] fsl-hv: no hypervisor found [   0.816356] usbcore: registered new interface driver snd-usb-audio [   0.816614] usbcore: registered new interface driver snd-ua101 [   0.816845] usbcore: registered new interface driver snd-usb-usx2y [   0.817389] ipip: IPv4 and MPLS over IPv4 tunneling driver [   0.818797] IPv4 over IPsec tunneling driver [   0.820198] Initializing XFRM netlink socket [   0.821242] NET: Registered protocol family 10 [   0.830017] Segment Routing with IPv6 [   0.830723] mip6: Mobile IPv6 [   0.832292] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [   0.834447] NET: Registered protocol family 17 [   0.834691] NET: Registered protocol family 15 [   0.835396] lec:lane_module_init: lec.c: initialized [   0.835567] mpoa:atm_mpoa_init: mpc.c: initialized [   0.835763] l2tp_core: L2TP core driver, V2.0 [   0.840489] DCCP: Activated CCID 2 (TCP-like) [   0.840655] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [   0.842064] sctp: Hash tables configured (bind 256/256) [   0.847782] NET: Registered protocol family 21 [   0.849268] Registered RDS/tcp transport [   0.849399] tipc: Activated (version 2.0.0) [   0.849674] NET: Registered protocol family 30 [   0.851092] tipc: Started in single node mode [   0.853171] Key type dns_resolver registered [   0.854525] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility version 15) loaded [   0.855060] drmem: No dynamic reconfiguration memory found [   0.856447] Loading compiled-in X.509 certificates [   0.857307] zswap: loaded using pool lzo/zbud [   0.860584] Btrfs loaded, crc32c=crc32c-generic [   0.863663] Key type encrypted registered [   0.864688] hctosys: unable to open rtc device (rtc0) [   0.865363] ALSA device list: [   0.865462]  #0: Virtual MIDI Card 1 [   0.869543] md: Waiting for all devices to be available before autodetect [   0.869723] md: If you don't use raid, use raid=noautodetect [   0.872156] md: Autodetecting RAID arrays. [   0.872294] md: autorun ... [   0.872379] md: ... autorun DONE. [   0.874278] VFS: Cannot open root device "vda3" or unknown-block(0,0): error -6 [   0.874465] Please append a correct "root=" boot option; here are the available partitions: [   0.874760] 0100         131072 ram0 [   0.874792] (driver?) [   0.875039] 0101         131072 ram1 [   0.875045] (driver?) [   0.875206] 0102         131072 ram2 [   0.875211] (driver?) [   0.875367] 0103         131072 ram3 [   0.875371] (driver?) [   0.875526] 0104         131072 ram4 [   0.875530] (driver?) [   0.875683] 0105         131072 ram5 [   0.875687] (driver?) [   0.875840] 0106         131072 ram6 [   0.875844] (driver?) [   0.876042] 0107         131072 ram7 [   0.876047] (driver?) [   0.876206] 0108         131072 ram8 [   0.876210] (driver?) [   0.876365] 0109         131072 ram9 [   0.876369] (driver?) [   0.876522] 010a         131072 ram10 [   0.876526] (driver?) [   0.876680] 010b         131072 ram11 [   0.876684] (driver?) [   0.876839] 010c         131072 ram12 [   0.876843] (driver?) [   0.877055] 010d         131072 ram13 [   0.877060] (driver?) [   0.877218] 010e         131072 ram14 [   0.877222] (driver?) [   0.877376] 010f         131072 ram15 [   0.877380] (driver?) [   0.877622] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [   0.878241] Rebooting in 180 seconds.. ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 12:33 ` Christian Zigotzky @ 2018-05-18 13:38 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 13:38 UTC (permalink / raw) To: Greg Kurz; +Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc Am 18.05.2018 um 14:33 schrieb Christian Zigotzky: > On 18 May 2018 at 2:16PM, Greg Kurz wrote: >> On Fri, 18 May 2018 13:50:42 +0200 >> Christian Zigotzky <chzigotzky@xenosoft.de> wrote: >> >>> On 18 May 2018 at 1:13PM, Greg Kurz wrote: >>>> And of course your kernel should be built with virtio support. >>> I think I have enabled virtio support. Please find attached my kernel >>> config. >>> >> Indeed, what about passing root=/dev/vda3 to the kernel ? >> > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -drive > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > -net nic,vlan=0,model=e1000 -net user,vlan=0 -append "rw > root=/dev/vda3" -machine dt_compatible=fsl,,P5020DS > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,drive=c1 -append "root=/dev/vda3" > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -drive > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -append "root=/dev/vda3" > > Output: > > [ 0.000000] MMU: Supported page sizes > [ 0.000000] 4 KB as direct > [ 0.000000] 4096 KB as direct > [ 0.000000] 16384 KB as direct > [ 0.000000] 65536 KB as direct > [ 0.000000] 262144 KB as direct > [ 0.000000] 1048576 KB as direct > [ 0.000000] MMU: Book3E HW tablewalk not supported > [ 0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 > (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 > (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 > [ 0.000000] Using CoreNet Generic machine description > [ 0.000000] bootconsole [udbg0] enabled > [ 0.000000] CPU maps initialized for 1 thread per core > [ 0.000000] ----------------------------------------------------- > [ 0.000000] phys_mem_size = 0x80000000 > [ 0.000000] dcache_bsize = 0x40 > [ 0.000000] icache_bsize = 0x40 > [ 0.000000] cpu_features = 0x00000003008001b4 > [ 0.000000] possible = 0x00000003009003b4 > [ 0.000000] always = 0x00000003008003b4 > [ 0.000000] cpu_user_features = 0xcc008000 0x08000000 > [ 0.000000] mmu_features = 0x000a0010 > [ 0.000000] firmware_features = 0x0000000000000000 > [ 0.000000] ----------------------------------------------------- > [ 0.000000] CoreNet Generic board > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] > [ 0.000000] DMA32 empty > [ 0.000000] Normal empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000000000000-0x000000007fffffff] > [ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts > [ 0.000000] percpu: Embedded 21 pages/cpu @ (ptrval) s48080 > r0 d37936 u1048576 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > 517120 > [ 0.000000] Kernel command line: root=/dev/vda3 > [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, > 2097152 bytes) > [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.000000] Memory: 1975688K/2097152K available (12088K kernel > code, 2072K rwdata, 8172K rodata, 412K init, 727K bss, 121464K > reserved, 0K cma-reserved) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU event tracing is enabled. > [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, > nr_cpu_ids=1 > [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 > [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at > fe0040000, max 1 CPUs > [ 0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff > [ 0.000000] mpic: Initializing for 512 sources > [ 0.000150] clocksource: timebase: mask: 0xffffffffffffffff > max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns > [ 0.000485] clocksource: timebase mult[2800000] shift[24] registered > [ 0.004932] Console: colour dummy device 80x25 > [ 0.005543] pid_max: default: 32768 minimum: 301 > [ 0.006251] Mount-cache hash table entries: 4096 (order: 3, 32768 > bytes) > [ 0.006441] Mountpoint-cache hash table entries: 4096 (order: 3, > 32768 bytes) > [ 0.021361] e500 family performance monitor hardware support > registered > [ 0.022294] Hierarchical SRCU implementation. > [ 0.024402] smp: Bringing up secondary CPUs ... > [ 0.024609] smp: Brought up 1 node, 1 CPU > [ 0.024811] Using standard scheduler topology > [ 0.030061] devtmpfs: initialized > [ 0.033704] random: get_random_u32 called from > .bucket_table_alloc+0x170/0x1c0 with crng_init=0 > [ 0.035459] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 1911260446275000 ns > [ 0.035764] futex hash table entries: 256 (order: 2, 16384 bytes) > [ 0.037098] xor: measuring software checksum speed > [ 0.046584] 8regs : 2620.000 MB/sec > [ 0.056774] 8regs_prefetch: 2380.000 MB/sec > [ 0.066974] 32regs : 2608.000 MB/sec > [ 0.077165] 32regs_prefetch: 2360.000 MB/sec > [ 0.077313] xor: using function: 8regs (2620.000 MB/sec) > [ 0.087868] NET: Registered protocol family 16 > [ 0.091070] cpuidle: using governor ladder > [ 0.091259] cpuidle: using governor menu > [ 0.097159] Machine: QEMU ppce500 > [ 0.097258] SoC family: QorIQ > [ 0.097343] SoC ID: svr:0x00000000, Revision: 0.0 > [ 0.111905] PCI: Probing PCI hardware > [ 0.216930] raid6: int64x1 gen() 1324 MB/s > [ 0.234228] raid6: int64x1 xor() 845 MB/s > [ 0.251545] raid6: int64x2 gen() 1718 MB/s > [ 0.268864] raid6: int64x2 xor() 1275 MB/s > [ 0.286186] raid6: int64x4 gen() 1800 MB/s > [ 0.303854] raid6: int64x4 xor() 1316 MB/s > [ 0.321316] raid6: int64x8 gen() 941 MB/s > [ 0.338625] raid6: int64x8 xor() 781 MB/s > [ 0.338752] raid6: using algorithm int64x4 gen() 1800 MB/s > [ 0.338900] raid6: .... xor() 1316 MB/s, rmw enabled > [ 0.339063] raid6: using intx1 recovery algorithm > [ 0.339817] Freescale Elo series DMA driver > [ 0.341262] vgaarb: loaded > [ 0.342302] SCSI subsystem initialized > [ 0.344113] usbcore: registered new interface driver usbfs > [ 0.344428] usbcore: registered new interface driver hub > [ 0.344684] usbcore: registered new device driver usb > [ 0.345268] pps_core: LinuxPPS API ver. 1 registered > [ 0.345404] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo Giometti <giometti@linux.it> > [ 0.345695] PTP clock support registered > [ 0.348569] EDAC MC: Ver: 3.0.0 > [ 0.351386] Advanced Linux Sound Architecture Driver Initialized. > [ 0.355672] NET: Registered protocol family 8 > [ 0.355814] NET: Registered protocol family 20 > [ 0.359236] clocksource: Switched to clocksource timebase > [ 0.361400] FS-Cache: Loaded > [ 0.362211] CacheFiles: Loaded > [ 0.390263] NET: Registered protocol family 2 > [ 0.393486] tcp_listen_portaddr_hash hash table entries: 1024 > (order: 2, 16384 bytes) > [ 0.393746] TCP established hash table entries: 16384 (order: 5, > 131072 bytes) > [ 0.394154] TCP bind hash table entries: 16384 (order: 6, 262144 > bytes) > [ 0.394505] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.395361] UDP hash table entries: 1024 (order: 3, 32768 bytes) > [ 0.395637] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > [ 0.396638] NET: Registered protocol family 1 > [ 0.399430] RPC: Registered named UNIX socket transport module. > [ 0.399619] RPC: Registered udp transport module. > [ 0.399743] RPC: Registered tcp transport module. > [ 0.399867] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.406335] Initialise system trusted keyrings > [ 0.408668] workingset: timestamp_bits=62 max_order=19 bucket_order=0 > [ 0.416796] zbud: loaded > [ 0.420149] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.436150] ntfs: driver 2.1.32 [Flags: R/W]. > [ 0.436705] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red > Hat, Inc. > [ 0.438486] fuse init (API version 7.26) > [ 0.451573] NET: Registered protocol family 38 > [ 0.451885] async_tx: api initialized (async) > [ 0.452277] Key type asymmetric registered > [ 0.452455] Asymmetric key parser 'x509' registered > [ 0.452880] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 249) > [ 0.453203] io scheduler noop registered > [ 0.453337] io scheduler deadline registered > [ 0.453651] io scheduler cfq registered (default) > [ 0.453798] io scheduler mq-deadline registered > [ 0.453962] io scheduler kyber registered > [ 0.455337] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 > [ 0.455484] crc32: self tests passed, processed 225944 bytes in > 442445 nsec > [ 0.456221] crc32c: CRC_LE_BITS = 64 > [ 0.456327] crc32c: self tests passed, processed 225944 bytes in > 226608 nsec > [ 0.486173] crc32_combine: 8373 self tests passed > [ 0.515206] crc32c_combine: 8373 self tests passed > [ 0.689268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.694784] console [ttyS0] disabled > [ 0.716358] serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, > base_baud = 115200) is a 16550A > [ 0.717314] console [ttyS0] enabled > [ 0.717314] console [ttyS0] enabled > [ 0.717686] bootconsole [udbg0] disabled > [ 0.717686] bootconsole [udbg0] disabled > [ 0.719049] ePAPR hypervisor byte channel driver > [ 0.721125] [drm] radeon kernel modesetting enabled. > [ 0.746621] brd: module loaded > [ 0.759781] loop: module loaded > [ 0.761701] zram: Added device: zram0 > [ 0.771074] libphy: Fixed MDIO Bus: probed > [ 0.772711] PPP generic driver version 2.4.2 > [ 0.778222] PPP BSD Compression module registered > [ 0.778382] PPP Deflate Compression module registered > [ 0.778614] PPP MPPE Compression module registered > [ 0.778763] NET: Registered protocol family 24 > [ 0.780125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.780421] ehci-pci: EHCI PCI platform driver > [ 0.780682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.781057] ohci-pci: OHCI PCI platform driver > [ 0.781671] ehci-fsl: Freescale EHCI Host controller driver > [ 0.781999] usbcore: registered new interface driver usblp > [ 0.782258] usbcore: registered new interface driver usb-storage > [ 0.782655] usbcore: registered new interface driver usbserial_generic > [ 0.783005] usbserial: USB Serial support registered for generic > [ 0.783247] usbcore: registered new interface driver ftdi_sio > [ 0.783465] usbserial: USB Serial support registered for FTDI USB > Serial Device > [ 0.786824] mousedev: PS/2 mouse device common for all mice > [ 0.787567] i2c /dev entries driver > [ 0.793355] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) > initialised: dm-devel@redhat.com > [ 0.793900] sdhci: Secure Digital Host Controller Interface driver > [ 0.794146] sdhci: Copyright(c) Pierre Ossman > [ 0.794353] sdhci-pltfm: SDHCI platform and OF driver helper > [ 0.796047] ledtrig-cpu: registered to indicate activity on CPUs > [ 0.796402] hidraw: raw HID events driver (C) Jiri Kosina > [ 0.798040] usbcore: registered new interface driver usbhid > [ 0.798199] usbhid: USB HID core driver > [ 0.798403] Freescale hypervisor management driver > [ 0.798544] fsl-hv: no hypervisor found > [ 0.816356] usbcore: registered new interface driver snd-usb-audio > [ 0.816614] usbcore: registered new interface driver snd-ua101 > [ 0.816845] usbcore: registered new interface driver snd-usb-usx2y > [ 0.817389] ipip: IPv4 and MPLS over IPv4 tunneling driver > [ 0.818797] IPv4 over IPsec tunneling driver > [ 0.820198] Initializing XFRM netlink socket > [ 0.821242] NET: Registered protocol family 10 > [ 0.830017] Segment Routing with IPv6 > [ 0.830723] mip6: Mobile IPv6 > [ 0.832292] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > [ 0.834447] NET: Registered protocol family 17 > [ 0.834691] NET: Registered protocol family 15 > [ 0.835396] lec:lane_module_init: lec.c: initialized > [ 0.835567] mpoa:atm_mpoa_init: mpc.c: initialized > [ 0.835763] l2tp_core: L2TP core driver, V2.0 > [ 0.840489] DCCP: Activated CCID 2 (TCP-like) > [ 0.840655] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) > [ 0.842064] sctp: Hash tables configured (bind 256/256) > [ 0.847782] NET: Registered protocol family 21 > [ 0.849268] Registered RDS/tcp transport > [ 0.849399] tipc: Activated (version 2.0.0) > [ 0.849674] NET: Registered protocol family 30 > [ 0.851092] tipc: Started in single node mode > [ 0.853171] Key type dns_resolver registered > [ 0.854525] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility > version 15) loaded > [ 0.855060] drmem: No dynamic reconfiguration memory found > [ 0.856447] Loading compiled-in X.509 certificates > [ 0.857307] zswap: loaded using pool lzo/zbud > [ 0.860584] Btrfs loaded, crc32c=crc32c-generic > [ 0.863663] Key type encrypted registered > [ 0.864688] hctosys: unable to open rtc device (rtc0) > [ 0.865363] ALSA device list: > [ 0.865462] #0: Virtual MIDI Card 1 > [ 0.869543] md: Waiting for all devices to be available before > autodetect > [ 0.869723] md: If you don't use raid, use raid=noautodetect > [ 0.872156] md: Autodetecting RAID arrays. > [ 0.872294] md: autorun ... > [ 0.872379] md: ... autorun DONE. > [ 0.874278] VFS: Cannot open root device "vda3" or > unknown-block(0,0): error -6 > [ 0.874465] Please append a correct "root=" boot option; here are > the available partitions: > [ 0.874760] 0100 131072 ram0 > [ 0.874792] (driver?) > [ 0.875039] 0101 131072 ram1 > [ 0.875045] (driver?) > [ 0.875206] 0102 131072 ram2 > [ 0.875211] (driver?) > [ 0.875367] 0103 131072 ram3 > [ 0.875371] (driver?) > [ 0.875526] 0104 131072 ram4 > [ 0.875530] (driver?) > [ 0.875683] 0105 131072 ram5 > [ 0.875687] (driver?) > [ 0.875840] 0106 131072 ram6 > [ 0.875844] (driver?) > [ 0.876042] 0107 131072 ram7 > [ 0.876047] (driver?) > [ 0.876206] 0108 131072 ram8 > [ 0.876210] (driver?) > [ 0.876365] 0109 131072 ram9 > [ 0.876369] (driver?) > [ 0.876522] 010a 131072 ram10 > [ 0.876526] (driver?) > [ 0.876680] 010b 131072 ram11 > [ 0.876684] (driver?) > [ 0.876839] 010c 131072 ram12 > [ 0.876843] (driver?) > [ 0.877055] 010d 131072 ram13 > [ 0.877060] (driver?) > [ 0.877218] 010e 131072 ram14 > [ 0.877222] (driver?) > [ 0.877376] 010f 131072 ram15 > [ 0.877380] (driver?) > [ 0.877622] Kernel panic - not syncing: VFS: Unable to mount root > fs on unknown-block(0,0) > [ 0.878241] Rebooting in 180 seconds.. > OK, I figured out, that the kernel doesn't detect any virtio device. I enabled the devices in the kernel config. Maybe another kernel option is missing. Any ideas? -- Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 13:38 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 13:38 UTC (permalink / raw) To: Greg Kurz; +Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc Am 18.05.2018 um 14:33 schrieb Christian Zigotzky: > On 18 May 2018 at 2:16PM, Greg Kurz wrote: >> On Fri, 18 May 2018 13:50:42 +0200 >> Christian Zigotzky <chzigotzky@xenosoft.de> wrote: >> >>> On 18 May 2018 at 1:13PM, Greg Kurz wrote: >>>> And of course your kernel should be built with virtio support. >>> I think I have enabled virtio support. Please find attached my kernel >>> config. >>> >> Indeed, what about passing root=/dev/vda3 to the kernel ? >> > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -drive > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > -net nic,vlan=0,modelá000 -net user,vlan=0 -append "rw > root=/dev/vda3" -machine dt_compatible=fsl,,P5020DS > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,driveÁ -append "root=/dev/vda3" > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -drive > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -append "root=/dev/vda3" > > Output: > > [   0.000000] MMU: Supported page sizes > [   0.000000]         4 KB as direct > [   0.000000]      4096 KB as direct > [   0.000000]     16384 KB as direct > [   0.000000]     65536 KB as direct > [   0.000000]    262144 KB as direct > [   0.000000]   1048576 KB as direct > [   0.000000] MMU: Book3E HW tablewalk not supported > [   0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 > (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 > (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 > [   0.000000] Using CoreNet Generic machine description > [   0.000000] bootconsole [udbg0] enabled > [   0.000000] CPU maps initialized for 1 thread per core > [   0.000000] ----------------------------------------------------- > [   0.000000] phys_mem_size    = 0x80000000 > [   0.000000] dcache_bsize     = 0x40 > [   0.000000] icache_bsize     = 0x40 > [   0.000000] cpu_features     = 0x00000003008001b4 > [   0.000000]  possible       = 0x00000003009003b4 > [   0.000000]  always         = 0x00000003008003b4 > [   0.000000] cpu_user_features = 0xcc008000 0x08000000 > [   0.000000] mmu_features     = 0x000a0010 > [   0.000000] firmware_features = 0x0000000000000000 > [   0.000000] ----------------------------------------------------- > [   0.000000] CoreNet Generic board > [   0.000000] Zone ranges: > [   0.000000]  DMA     [mem 0x0000000000000000-0x000000007fffffff] > [   0.000000]  DMA32   empty > [   0.000000]  Normal  empty > [   0.000000] Movable zone start for each node > [   0.000000] Early memory node ranges > [   0.000000]  node  0: [mem 0x0000000000000000-0x000000007fffffff] > [   0.000000] Initmem setup node 0 [mem > 0x0000000000000000-0x000000007fffffff] > [   0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts > [   0.000000] percpu: Embedded 21 pages/cpu @       (ptrval) s48080 > r0 d37936 u1048576 > [   0.000000] Built 1 zonelists, mobility grouping on. Total pages: > 517120 > [   0.000000] Kernel command line: root=/dev/vda3 > [   0.000000] Dentry cache hash table entries: 262144 (order: 9, > 2097152 bytes) > [   0.000000] Inode-cache hash table entries: 131072 (order: 8, > 1048576 bytes) > [   0.000000] Memory: 1975688K/2097152K available (12088K kernel > code, 2072K rwdata, 8172K rodata, 412K init, 727K bss, 121464K > reserved, 0K cma-reserved) > [   0.000000] SLUB: HWalignd, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [   0.000000] Hierarchical RCU implementation. > [   0.000000]    RCU event tracing is enabled. > [   0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. > [   0.000000] RCU: Adjusting geometry for rcu_fanout_leaf\x16, > nr_cpu_ids=1 > [   0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 > [   0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at > fe0040000, max 1 CPUs > [   0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff > [   0.000000] mpic: Initializing for 512 sources > [   0.000150] clocksource: timebase: mask: 0xffffffffffffffff > max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns > [   0.000485] clocksource: timebase mult[2800000] shift[24] registered > [   0.004932] Console: colour dummy device 80x25 > [   0.005543] pid_max: default: 32768 minimum: 301 > [   0.006251] Mount-cache hash table entries: 4096 (order: 3, 32768 > bytes) > [   0.006441] Mountpoint-cache hash table entries: 4096 (order: 3, > 32768 bytes) > [   0.021361] e500 family performance monitor hardware support > registered > [   0.022294] Hierarchical SRCU implementation. > [   0.024402] smp: Bringing up secondary CPUs ... > [   0.024609] smp: Brought up 1 node, 1 CPU > [   0.024811] Using standard scheduler topology > [   0.030061] devtmpfs: initialized > [   0.033704] random: get_random_u32 called from > .bucket_table_alloc+0x170/0x1c0 with crng_init=0 > [   0.035459] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 1911260446275000 ns > [   0.035764] futex hash table entries: 256 (order: 2, 16384 bytes) > [   0.037098] xor: measuring software checksum speed > [   0.046584]   8regs    : 2620.000 MB/sec > [   0.056774]   8regs_prefetch: 2380.000 MB/sec > [   0.066974]   32regs   : 2608.000 MB/sec > [   0.077165]   32regs_prefetch: 2360.000 MB/sec > [   0.077313] xor: using function: 8regs (2620.000 MB/sec) > [   0.087868] NET: Registered protocol family 16 > [   0.091070] cpuidle: using governor ladder > [   0.091259] cpuidle: using governor menu > [   0.097159] Machine: QEMU ppce500 > [   0.097258] SoC family: QorIQ > [   0.097343] SoC ID: svr:0x00000000, Revision: 0.0 > [   0.111905] PCI: Probing PCI hardware > [   0.216930] raid6: int64x1 gen() 1324 MB/s > [   0.234228] raid6: int64x1 xor()  845 MB/s > [   0.251545] raid6: int64x2 gen() 1718 MB/s > [   0.268864] raid6: int64x2 xor() 1275 MB/s > [   0.286186] raid6: int64x4 gen() 1800 MB/s > [   0.303854] raid6: int64x4 xor() 1316 MB/s > [   0.321316] raid6: int64x8 gen()  941 MB/s > [   0.338625] raid6: int64x8 xor()  781 MB/s > [   0.338752] raid6: using algorithm int64x4 gen() 1800 MB/s > [   0.338900] raid6: .... xor() 1316 MB/s, rmw enabled > [   0.339063] raid6: using intx1 recovery algorithm > [   0.339817] Freescale Elo series DMA driver > [   0.341262] vgaarb: loaded > [   0.342302] SCSI subsystem initialized > [   0.344113] usbcore: registered new interface driver usbfs > [   0.344428] usbcore: registered new interface driver hub > [   0.344684] usbcore: registered new device driver usb > [   0.345268] pps_core: LinuxPPS API ver. 1 registered > [   0.345404] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo Giometti <giometti@linux.it> > [   0.345695] PTP clock support registered > [   0.348569] EDAC MC: Ver: 3.0.0 > [   0.351386] Advanced Linux Sound Architecture Driver Initialized. > [   0.355672] NET: Registered protocol family 8 > [   0.355814] NET: Registered protocol family 20 > [   0.359236] clocksource: Switched to clocksource timebase > [   0.361400] FS-Cache: Loaded > [   0.362211] CacheFiles: Loaded > [   0.390263] NET: Registered protocol family 2 > [   0.393486] tcp_listen_portaddr_hash hash table entries: 1024 > (order: 2, 16384 bytes) > [   0.393746] TCP established hash table entries: 16384 (order: 5, > 131072 bytes) > [   0.394154] TCP bind hash table entries: 16384 (order: 6, 262144 > bytes) > [   0.394505] TCP: Hash tables configured (established 16384 bind 16384) > [   0.395361] UDP hash table entries: 1024 (order: 3, 32768 bytes) > [   0.395637] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > [   0.396638] NET: Registered protocol family 1 > [   0.399430] RPC: Registered named UNIX socket transport module. > [   0.399619] RPC: Registered udp transport module. > [   0.399743] RPC: Registered tcp transport module. > [   0.399867] RPC: Registered tcp NFSv4.1 backchannel transport module. > [   0.406335] Initialise system trusted keyrings > [   0.408668] workingset: timestamp_bitsb max_order\x19 bucket_order=0 > [   0.416796] zbud: loaded > [   0.420149] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [   0.436150] ntfs: driver 2.1.32 [Flags: R/W]. > [   0.436705] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red > Hat, Inc. > [   0.438486] fuse init (API version 7.26) > [   0.451573] NET: Registered protocol family 38 > [   0.451885] async_tx: api initialized (async) > [   0.452277] Key type asymmetric registered > [   0.452455] Asymmetric key parser 'x509' registered > [   0.452880] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 249) > [   0.453203] io scheduler noop registered > [   0.453337] io scheduler deadline registered > [   0.453651] io scheduler cfq registered (default) > [   0.453798] io scheduler mq-deadline registered > [   0.453962] io scheduler kyber registered > [   0.455337] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 > [   0.455484] crc32: self tests passed, processed 225944 bytes in > 442445 nsec > [   0.456221] crc32c: CRC_LE_BITS = 64 > [   0.456327] crc32c: self tests passed, processed 225944 bytes in > 226608 nsec > [   0.486173] crc32_combine: 8373 self tests passed > [   0.515206] crc32c_combine: 8373 self tests passed > [   0.689268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [   0.694784] console [ttyS0] disabled > [   0.716358] serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, > base_baud = 115200) is a 16550A > [   0.717314] console [ttyS0] enabled > [   0.717314] console [ttyS0] enabled > [   0.717686] bootconsole [udbg0] disabled > [   0.717686] bootconsole [udbg0] disabled > [   0.719049] ePAPR hypervisor byte channel driver > [   0.721125] [drm] radeon kernel modesetting enabled. > [   0.746621] brd: module loaded > [   0.759781] loop: module loaded > [   0.761701] zram: Added device: zram0 > [   0.771074] libphy: Fixed MDIO Bus: probed > [   0.772711] PPP generic driver version 2.4.2 > [   0.778222] PPP BSD Compression module registered > [   0.778382] PPP Deflate Compression module registered > [   0.778614] PPP MPPE Compression module registered > [   0.778763] NET: Registered protocol family 24 > [   0.780125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [   0.780421] ehci-pci: EHCI PCI platform driver > [   0.780682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [   0.781057] ohci-pci: OHCI PCI platform driver > [   0.781671] ehci-fsl: Freescale EHCI Host controller driver > [   0.781999] usbcore: registered new interface driver usblp > [   0.782258] usbcore: registered new interface driver usb-storage > [   0.782655] usbcore: registered new interface driver usbserial_generic > [   0.783005] usbserial: USB Serial support registered for generic > [   0.783247] usbcore: registered new interface driver ftdi_sio > [   0.783465] usbserial: USB Serial support registered for FTDI USB > Serial Device > [   0.786824] mousedev: PS/2 mouse device common for all mice > [   0.787567] i2c /dev entries driver > [   0.793355] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) > initialised: dm-devel@redhat.com > [   0.793900] sdhci: Secure Digital Host Controller Interface driver > [   0.794146] sdhci: Copyright(c) Pierre Ossman > [   0.794353] sdhci-pltfm: SDHCI platform and OF driver helper > [   0.796047] ledtrig-cpu: registered to indicate activity on CPUs > [   0.796402] hidraw: raw HID events driver (C) Jiri Kosina > [   0.798040] usbcore: registered new interface driver usbhid > [   0.798199] usbhid: USB HID core driver > [   0.798403] Freescale hypervisor management driver > [   0.798544] fsl-hv: no hypervisor found > [   0.816356] usbcore: registered new interface driver snd-usb-audio > [   0.816614] usbcore: registered new interface driver snd-ua101 > [   0.816845] usbcore: registered new interface driver snd-usb-usx2y > [   0.817389] ipip: IPv4 and MPLS over IPv4 tunneling driver > [   0.818797] IPv4 over IPsec tunneling driver > [   0.820198] Initializing XFRM netlink socket > [   0.821242] NET: Registered protocol family 10 > [   0.830017] Segment Routing with IPv6 > [   0.830723] mip6: Mobile IPv6 > [   0.832292] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > [   0.834447] NET: Registered protocol family 17 > [   0.834691] NET: Registered protocol family 15 > [   0.835396] lec:lane_module_init: lec.c: initialized > [   0.835567] mpoa:atm_mpoa_init: mpc.c: initialized > [   0.835763] l2tp_core: L2TP core driver, V2.0 > [   0.840489] DCCP: Activated CCID 2 (TCP-like) > [   0.840655] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) > [   0.842064] sctp: Hash tables configured (bind 256/256) > [   0.847782] NET: Registered protocol family 21 > [   0.849268] Registered RDS/tcp transport > [   0.849399] tipc: Activated (version 2.0.0) > [   0.849674] NET: Registered protocol family 30 > [   0.851092] tipc: Started in single node mode > [   0.853171] Key type dns_resolver registered > [   0.854525] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility > version 15) loaded > [   0.855060] drmem: No dynamic reconfiguration memory found > [   0.856447] Loading compiled-in X.509 certificates > [   0.857307] zswap: loaded using pool lzo/zbud > [   0.860584] Btrfs loaded, crc32c=crc32c-generic > [   0.863663] Key type encrypted registered > [   0.864688] hctosys: unable to open rtc device (rtc0) > [   0.865363] ALSA device list: > [   0.865462]  #0: Virtual MIDI Card 1 > [   0.869543] md: Waiting for all devices to be available before > autodetect > [   0.869723] md: If you don't use raid, use raid=noautodetect > [   0.872156] md: Autodetecting RAID arrays. > [   0.872294] md: autorun ... > [   0.872379] md: ... autorun DONE. > [   0.874278] VFS: Cannot open root device "vda3" or > unknown-block(0,0): error -6 > [   0.874465] Please append a correct "root=" boot option; here are > the available partitions: > [   0.874760] 0100         131072 ram0 > [   0.874792] (driver?) > [   0.875039] 0101         131072 ram1 > [   0.875045] (driver?) > [   0.875206] 0102         131072 ram2 > [   0.875211] (driver?) > [   0.875367] 0103         131072 ram3 > [   0.875371] (driver?) > [   0.875526] 0104         131072 ram4 > [   0.875530] (driver?) > [   0.875683] 0105         131072 ram5 > [   0.875687] (driver?) > [   0.875840] 0106         131072 ram6 > [   0.875844] (driver?) > [   0.876042] 0107         131072 ram7 > [   0.876047] (driver?) > [   0.876206] 0108         131072 ram8 > [   0.876210] (driver?) > [   0.876365] 0109         131072 ram9 > [   0.876369] (driver?) > [   0.876522] 010a         131072 ram10 > [   0.876526] (driver?) > [   0.876680] 010b         131072 ram11 > [   0.876684] (driver?) > [   0.876839] 010c         131072 ram12 > [   0.876843] (driver?) > [   0.877055] 010d         131072 ram13 > [   0.877060] (driver?) > [   0.877218] 010e         131072 ram14 > [   0.877222] (driver?) > [   0.877376] 010f         131072 ram15 > [   0.877380] (driver?) > [   0.877622] Kernel panic - not syncing: VFS: Unable to mount root > fs on unknown-block(0,0) > [   0.878241] Rebooting in 180 seconds.. > OK, I figured out, that the kernel doesn't detect any virtio device. I enabled the devices in the kernel config. Maybe another kernel option is missing. Any ideas? -- Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 13:38 ` Christian Zigotzky @ 2018-05-18 14:03 ` Greg Kurz -1 siblings, 0 replies; 35+ messages in thread From: Greg Kurz @ 2018-05-18 14:03 UTC (permalink / raw) To: Christian Zigotzky Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On Fri, 18 May 2018 15:38:40 +0200 Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > Am 18.05.2018 um 14:33 schrieb Christian Zigotzky: > > On 18 May 2018 at 2:16PM, Greg Kurz wrote: > >> On Fri, 18 May 2018 13:50:42 +0200 > >> Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > >> > >>> On 18 May 2018 at 1:13PM, Greg Kurz wrote: > >>>> And of course your kernel should be built with virtio support. > >>> I think I have enabled virtio support. Please find attached my kernel > >>> config. > >>> > >> Indeed, what about passing root=/dev/vda3 to the kernel ? > >> > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > > -drive > > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > > -net nic,vlan=0,model=e1000 -net user,vlan=0 -append "rw > > root=/dev/vda3" -machine dt_compatible=fsl,,P5020DS > > > > or > > > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > > if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > > -device scsi-cd,drive=c1 -append "root=/dev/vda3" > > > > or > > > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > > -machine dt_compatible=fsl,,P5020DS -drive > > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > > -append "root=/dev/vda3" > > > > Output: > > > > [ 0.000000] MMU: Supported page sizes > > [ 0.000000] 4 KB as direct > > [ 0.000000] 4096 KB as direct > > [ 0.000000] 16384 KB as direct > > [ 0.000000] 65536 KB as direct > > [ 0.000000] 262144 KB as direct > > [ 0.000000] 1048576 KB as direct > > [ 0.000000] MMU: Book3E HW tablewalk not supported > > [ 0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 > > (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 > > (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 > > [ 0.000000] Using CoreNet Generic machine description > > [ 0.000000] bootconsole [udbg0] enabled > > [ 0.000000] CPU maps initialized for 1 thread per core > > [ 0.000000] ----------------------------------------------------- > > [ 0.000000] phys_mem_size = 0x80000000 > > [ 0.000000] dcache_bsize = 0x40 > > [ 0.000000] icache_bsize = 0x40 > > [ 0.000000] cpu_features = 0x00000003008001b4 > > [ 0.000000] possible = 0x00000003009003b4 > > [ 0.000000] always = 0x00000003008003b4 > > [ 0.000000] cpu_user_features = 0xcc008000 0x08000000 > > [ 0.000000] mmu_features = 0x000a0010 > > [ 0.000000] firmware_features = 0x0000000000000000 > > [ 0.000000] ----------------------------------------------------- > > [ 0.000000] CoreNet Generic board > > [ 0.000000] Zone ranges: > > [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] > > [ 0.000000] DMA32 empty > > [ 0.000000] Normal empty > > [ 0.000000] Movable zone start for each node > > [ 0.000000] Early memory node ranges > > [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] > > [ 0.000000] Initmem setup node 0 [mem > > 0x0000000000000000-0x000000007fffffff] > > [ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts > > [ 0.000000] percpu: Embedded 21 pages/cpu @ (ptrval) s48080 > > r0 d37936 u1048576 > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > > 517120 > > [ 0.000000] Kernel command line: root=/dev/vda3 > > [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, > > 2097152 bytes) > > [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, > > 1048576 bytes) > > [ 0.000000] Memory: 1975688K/2097152K available (12088K kernel > > code, 2072K rwdata, 8172K rodata, 412K init, 727K bss, 121464K > > reserved, 0K cma-reserved) > > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > [ 0.000000] Hierarchical RCU implementation. > > [ 0.000000] RCU event tracing is enabled. > > [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. > > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, > > nr_cpu_ids=1 > > [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 > > [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at > > fe0040000, max 1 CPUs > > [ 0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff > > [ 0.000000] mpic: Initializing for 512 sources > > [ 0.000150] clocksource: timebase: mask: 0xffffffffffffffff > > max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns > > [ 0.000485] clocksource: timebase mult[2800000] shift[24] registered > > [ 0.004932] Console: colour dummy device 80x25 > > [ 0.005543] pid_max: default: 32768 minimum: 301 > > [ 0.006251] Mount-cache hash table entries: 4096 (order: 3, 32768 > > bytes) > > [ 0.006441] Mountpoint-cache hash table entries: 4096 (order: 3, > > 32768 bytes) > > [ 0.021361] e500 family performance monitor hardware support > > registered > > [ 0.022294] Hierarchical SRCU implementation. > > [ 0.024402] smp: Bringing up secondary CPUs ... > > [ 0.024609] smp: Brought up 1 node, 1 CPU > > [ 0.024811] Using standard scheduler topology > > [ 0.030061] devtmpfs: initialized > > [ 0.033704] random: get_random_u32 called from > > .bucket_table_alloc+0x170/0x1c0 with crng_init=0 > > [ 0.035459] clocksource: jiffies: mask: 0xffffffff max_cycles: > > 0xffffffff, max_idle_ns: 1911260446275000 ns > > [ 0.035764] futex hash table entries: 256 (order: 2, 16384 bytes) > > [ 0.037098] xor: measuring software checksum speed > > [ 0.046584] 8regs : 2620.000 MB/sec > > [ 0.056774] 8regs_prefetch: 2380.000 MB/sec > > [ 0.066974] 32regs : 2608.000 MB/sec > > [ 0.077165] 32regs_prefetch: 2360.000 MB/sec > > [ 0.077313] xor: using function: 8regs (2620.000 MB/sec) > > [ 0.087868] NET: Registered protocol family 16 > > [ 0.091070] cpuidle: using governor ladder > > [ 0.091259] cpuidle: using governor menu > > [ 0.097159] Machine: QEMU ppce500 > > [ 0.097258] SoC family: QorIQ > > [ 0.097343] SoC ID: svr:0x00000000, Revision: 0.0 > > [ 0.111905] PCI: Probing PCI hardware > > [ 0.216930] raid6: int64x1 gen() 1324 MB/s > > [ 0.234228] raid6: int64x1 xor() 845 MB/s > > [ 0.251545] raid6: int64x2 gen() 1718 MB/s > > [ 0.268864] raid6: int64x2 xor() 1275 MB/s > > [ 0.286186] raid6: int64x4 gen() 1800 MB/s > > [ 0.303854] raid6: int64x4 xor() 1316 MB/s > > [ 0.321316] raid6: int64x8 gen() 941 MB/s > > [ 0.338625] raid6: int64x8 xor() 781 MB/s > > [ 0.338752] raid6: using algorithm int64x4 gen() 1800 MB/s > > [ 0.338900] raid6: .... xor() 1316 MB/s, rmw enabled > > [ 0.339063] raid6: using intx1 recovery algorithm > > [ 0.339817] Freescale Elo series DMA driver > > [ 0.341262] vgaarb: loaded > > [ 0.342302] SCSI subsystem initialized > > [ 0.344113] usbcore: registered new interface driver usbfs > > [ 0.344428] usbcore: registered new interface driver hub > > [ 0.344684] usbcore: registered new device driver usb > > [ 0.345268] pps_core: LinuxPPS API ver. 1 registered > > [ 0.345404] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > > Rodolfo Giometti <giometti@linux.it> > > [ 0.345695] PTP clock support registered > > [ 0.348569] EDAC MC: Ver: 3.0.0 > > [ 0.351386] Advanced Linux Sound Architecture Driver Initialized. > > [ 0.355672] NET: Registered protocol family 8 > > [ 0.355814] NET: Registered protocol family 20 > > [ 0.359236] clocksource: Switched to clocksource timebase > > [ 0.361400] FS-Cache: Loaded > > [ 0.362211] CacheFiles: Loaded > > [ 0.390263] NET: Registered protocol family 2 > > [ 0.393486] tcp_listen_portaddr_hash hash table entries: 1024 > > (order: 2, 16384 bytes) > > [ 0.393746] TCP established hash table entries: 16384 (order: 5, > > 131072 bytes) > > [ 0.394154] TCP bind hash table entries: 16384 (order: 6, 262144 > > bytes) > > [ 0.394505] TCP: Hash tables configured (established 16384 bind 16384) > > [ 0.395361] UDP hash table entries: 1024 (order: 3, 32768 bytes) > > [ 0.395637] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > > [ 0.396638] NET: Registered protocol family 1 > > [ 0.399430] RPC: Registered named UNIX socket transport module. > > [ 0.399619] RPC: Registered udp transport module. > > [ 0.399743] RPC: Registered tcp transport module. > > [ 0.399867] RPC: Registered tcp NFSv4.1 backchannel transport module. > > [ 0.406335] Initialise system trusted keyrings > > [ 0.408668] workingset: timestamp_bits=62 max_order=19 bucket_order=0 > > [ 0.416796] zbud: loaded > > [ 0.420149] squashfs: version 4.0 (2009/01/31) Phillip Lougher > > [ 0.436150] ntfs: driver 2.1.32 [Flags: R/W]. > > [ 0.436705] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red > > Hat, Inc. > > [ 0.438486] fuse init (API version 7.26) > > [ 0.451573] NET: Registered protocol family 38 > > [ 0.451885] async_tx: api initialized (async) > > [ 0.452277] Key type asymmetric registered > > [ 0.452455] Asymmetric key parser 'x509' registered > > [ 0.452880] Block layer SCSI generic (bsg) driver version 0.4 > > loaded (major 249) > > [ 0.453203] io scheduler noop registered > > [ 0.453337] io scheduler deadline registered > > [ 0.453651] io scheduler cfq registered (default) > > [ 0.453798] io scheduler mq-deadline registered > > [ 0.453962] io scheduler kyber registered > > [ 0.455337] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 > > [ 0.455484] crc32: self tests passed, processed 225944 bytes in > > 442445 nsec > > [ 0.456221] crc32c: CRC_LE_BITS = 64 > > [ 0.456327] crc32c: self tests passed, processed 225944 bytes in > > 226608 nsec > > [ 0.486173] crc32_combine: 8373 self tests passed > > [ 0.515206] crc32c_combine: 8373 self tests passed > > [ 0.689268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > [ 0.694784] console [ttyS0] disabled > > [ 0.716358] serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, > > base_baud = 115200) is a 16550A > > [ 0.717314] console [ttyS0] enabled > > [ 0.717314] console [ttyS0] enabled > > [ 0.717686] bootconsole [udbg0] disabled > > [ 0.717686] bootconsole [udbg0] disabled > > [ 0.719049] ePAPR hypervisor byte channel driver > > [ 0.721125] [drm] radeon kernel modesetting enabled. > > [ 0.746621] brd: module loaded > > [ 0.759781] loop: module loaded > > [ 0.761701] zram: Added device: zram0 > > [ 0.771074] libphy: Fixed MDIO Bus: probed > > [ 0.772711] PPP generic driver version 2.4.2 > > [ 0.778222] PPP BSD Compression module registered > > [ 0.778382] PPP Deflate Compression module registered > > [ 0.778614] PPP MPPE Compression module registered > > [ 0.778763] NET: Registered protocol family 24 > > [ 0.780125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > [ 0.780421] ehci-pci: EHCI PCI platform driver > > [ 0.780682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > > [ 0.781057] ohci-pci: OHCI PCI platform driver > > [ 0.781671] ehci-fsl: Freescale EHCI Host controller driver > > [ 0.781999] usbcore: registered new interface driver usblp > > [ 0.782258] usbcore: registered new interface driver usb-storage > > [ 0.782655] usbcore: registered new interface driver usbserial_generic > > [ 0.783005] usbserial: USB Serial support registered for generic > > [ 0.783247] usbcore: registered new interface driver ftdi_sio > > [ 0.783465] usbserial: USB Serial support registered for FTDI USB > > Serial Device > > [ 0.786824] mousedev: PS/2 mouse device common for all mice > > [ 0.787567] i2c /dev entries driver > > [ 0.793355] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) > > initialised: dm-devel@redhat.com > > [ 0.793900] sdhci: Secure Digital Host Controller Interface driver > > [ 0.794146] sdhci: Copyright(c) Pierre Ossman > > [ 0.794353] sdhci-pltfm: SDHCI platform and OF driver helper > > [ 0.796047] ledtrig-cpu: registered to indicate activity on CPUs > > [ 0.796402] hidraw: raw HID events driver (C) Jiri Kosina > > [ 0.798040] usbcore: registered new interface driver usbhid > > [ 0.798199] usbhid: USB HID core driver > > [ 0.798403] Freescale hypervisor management driver > > [ 0.798544] fsl-hv: no hypervisor found > > [ 0.816356] usbcore: registered new interface driver snd-usb-audio > > [ 0.816614] usbcore: registered new interface driver snd-ua101 > > [ 0.816845] usbcore: registered new interface driver snd-usb-usx2y > > [ 0.817389] ipip: IPv4 and MPLS over IPv4 tunneling driver > > [ 0.818797] IPv4 over IPsec tunneling driver > > [ 0.820198] Initializing XFRM netlink socket > > [ 0.821242] NET: Registered protocol family 10 > > [ 0.830017] Segment Routing with IPv6 > > [ 0.830723] mip6: Mobile IPv6 > > [ 0.832292] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > > [ 0.834447] NET: Registered protocol family 17 > > [ 0.834691] NET: Registered protocol family 15 > > [ 0.835396] lec:lane_module_init: lec.c: initialized > > [ 0.835567] mpoa:atm_mpoa_init: mpc.c: initialized > > [ 0.835763] l2tp_core: L2TP core driver, V2.0 > > [ 0.840489] DCCP: Activated CCID 2 (TCP-like) > > [ 0.840655] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) > > [ 0.842064] sctp: Hash tables configured (bind 256/256) > > [ 0.847782] NET: Registered protocol family 21 > > [ 0.849268] Registered RDS/tcp transport > > [ 0.849399] tipc: Activated (version 2.0.0) > > [ 0.849674] NET: Registered protocol family 30 > > [ 0.851092] tipc: Started in single node mode > > [ 0.853171] Key type dns_resolver registered > > [ 0.854525] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility > > version 15) loaded > > [ 0.855060] drmem: No dynamic reconfiguration memory found > > [ 0.856447] Loading compiled-in X.509 certificates > > [ 0.857307] zswap: loaded using pool lzo/zbud > > [ 0.860584] Btrfs loaded, crc32c=crc32c-generic > > [ 0.863663] Key type encrypted registered > > [ 0.864688] hctosys: unable to open rtc device (rtc0) > > [ 0.865363] ALSA device list: > > [ 0.865462] #0: Virtual MIDI Card 1 > > [ 0.869543] md: Waiting for all devices to be available before > > autodetect > > [ 0.869723] md: If you don't use raid, use raid=noautodetect > > [ 0.872156] md: Autodetecting RAID arrays. > > [ 0.872294] md: autorun ... > > [ 0.872379] md: ... autorun DONE. > > [ 0.874278] VFS: Cannot open root device "vda3" or > > unknown-block(0,0): error -6 > > [ 0.874465] Please append a correct "root=" boot option; here are > > the available partitions: > > [ 0.874760] 0100 131072 ram0 > > [ 0.874792] (driver?) > > [ 0.875039] 0101 131072 ram1 > > [ 0.875045] (driver?) > > [ 0.875206] 0102 131072 ram2 > > [ 0.875211] (driver?) > > [ 0.875367] 0103 131072 ram3 > > [ 0.875371] (driver?) > > [ 0.875526] 0104 131072 ram4 > > [ 0.875530] (driver?) > > [ 0.875683] 0105 131072 ram5 > > [ 0.875687] (driver?) > > [ 0.875840] 0106 131072 ram6 > > [ 0.875844] (driver?) > > [ 0.876042] 0107 131072 ram7 > > [ 0.876047] (driver?) > > [ 0.876206] 0108 131072 ram8 > > [ 0.876210] (driver?) > > [ 0.876365] 0109 131072 ram9 > > [ 0.876369] (driver?) > > [ 0.876522] 010a 131072 ram10 > > [ 0.876526] (driver?) > > [ 0.876680] 010b 131072 ram11 > > [ 0.876684] (driver?) > > [ 0.876839] 010c 131072 ram12 > > [ 0.876843] (driver?) > > [ 0.877055] 010d 131072 ram13 > > [ 0.877060] (driver?) > > [ 0.877218] 010e 131072 ram14 > > [ 0.877222] (driver?) > > [ 0.877376] 010f 131072 ram15 > > [ 0.877380] (driver?) > > [ 0.877622] Kernel panic - not syncing: VFS: Unable to mount root > > fs on unknown-block(0,0) > > [ 0.878241] Rebooting in 180 seconds.. > > > OK, I figured out, that the kernel doesn't detect any virtio device. I > enabled the devices in the kernel config. Maybe another kernel option is > missing. Any ideas? > Yeah, I was thinking about something like that as well... unfortunately, I'm not familiar with ppce500 boards and I don't know what drivers are needed... > -- Christian > ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 14:03 ` Greg Kurz 0 siblings, 0 replies; 35+ messages in thread From: Greg Kurz @ 2018-05-18 14:03 UTC (permalink / raw) To: Christian Zigotzky Cc: Thomas Huth, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On Fri, 18 May 2018 15:38:40 +0200 Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > Am 18.05.2018 um 14:33 schrieb Christian Zigotzky: > > On 18 May 2018 at 2:16PM, Greg Kurz wrote: > >> On Fri, 18 May 2018 13:50:42 +0200 > >> Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > >> > >>> On 18 May 2018 at 1:13PM, Greg Kurz wrote: > >>>> And of course your kernel should be built with virtio support. > >>> I think I have enabled virtio support. Please find attached my kernel > >>> config. > >>> > >> Indeed, what about passing root=/dev/vda3 to the kernel ? > >> > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > > -drive > > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > > -net nic,vlan=0,modelá000 -net user,vlan=0 -append "rw > > root=/dev/vda3" -machine dt_compatible=fsl,,P5020DS > > > > or > > > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > > if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > > -device scsi-cd,driveÁ -append "root=/dev/vda3" > > > > or > > > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > > -machine dt_compatible=fsl,,P5020DS -drive > > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > > -append "root=/dev/vda3" > > > > Output: > > > > [   0.000000] MMU: Supported page sizes > > [   0.000000]         4 KB as direct > > [   0.000000]      4096 KB as direct > > [   0.000000]     16384 KB as direct > > [   0.000000]     65536 KB as direct > > [   0.000000]    262144 KB as direct > > [   0.000000]   1048576 KB as direct > > [   0.000000] MMU: Book3E HW tablewalk not supported > > [   0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 > > (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 > > (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 > > [   0.000000] Using CoreNet Generic machine description > > [   0.000000] bootconsole [udbg0] enabled > > [   0.000000] CPU maps initialized for 1 thread per core > > [   0.000000] ----------------------------------------------------- > > [   0.000000] phys_mem_size    = 0x80000000 > > [   0.000000] dcache_bsize     = 0x40 > > [   0.000000] icache_bsize     = 0x40 > > [   0.000000] cpu_features     = 0x00000003008001b4 > > [   0.000000]  possible       = 0x00000003009003b4 > > [   0.000000]  always         = 0x00000003008003b4 > > [   0.000000] cpu_user_features = 0xcc008000 0x08000000 > > [   0.000000] mmu_features     = 0x000a0010 > > [   0.000000] firmware_features = 0x0000000000000000 > > [   0.000000] ----------------------------------------------------- > > [   0.000000] CoreNet Generic board > > [   0.000000] Zone ranges: > > [   0.000000]  DMA     [mem 0x0000000000000000-0x000000007fffffff] > > [   0.000000]  DMA32   empty > > [   0.000000]  Normal  empty > > [   0.000000] Movable zone start for each node > > [   0.000000] Early memory node ranges > > [   0.000000]  node  0: [mem 0x0000000000000000-0x000000007fffffff] > > [   0.000000] Initmem setup node 0 [mem > > 0x0000000000000000-0x000000007fffffff] > > [   0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts > > [   0.000000] percpu: Embedded 21 pages/cpu @       (ptrval) s48080 > > r0 d37936 u1048576 > > [   0.000000] Built 1 zonelists, mobility grouping on. Total pages: > > 517120 > > [   0.000000] Kernel command line: root=/dev/vda3 > > [   0.000000] Dentry cache hash table entries: 262144 (order: 9, > > 2097152 bytes) > > [   0.000000] Inode-cache hash table entries: 131072 (order: 8, > > 1048576 bytes) > > [   0.000000] Memory: 1975688K/2097152K available (12088K kernel > > code, 2072K rwdata, 8172K rodata, 412K init, 727K bss, 121464K > > reserved, 0K cma-reserved) > > [   0.000000] SLUB: HWalignd, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > [   0.000000] Hierarchical RCU implementation. > > [   0.000000]    RCU event tracing is enabled. > > [   0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. > > [   0.000000] RCU: Adjusting geometry for rcu_fanout_leaf\x16, > > nr_cpu_ids=1 > > [   0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 > > [   0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at > > fe0040000, max 1 CPUs > > [   0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff > > [   0.000000] mpic: Initializing for 512 sources > > [   0.000150] clocksource: timebase: mask: 0xffffffffffffffff > > max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns > > [   0.000485] clocksource: timebase mult[2800000] shift[24] registered > > [   0.004932] Console: colour dummy device 80x25 > > [   0.005543] pid_max: default: 32768 minimum: 301 > > [   0.006251] Mount-cache hash table entries: 4096 (order: 3, 32768 > > bytes) > > [   0.006441] Mountpoint-cache hash table entries: 4096 (order: 3, > > 32768 bytes) > > [   0.021361] e500 family performance monitor hardware support > > registered > > [   0.022294] Hierarchical SRCU implementation. > > [   0.024402] smp: Bringing up secondary CPUs ... > > [   0.024609] smp: Brought up 1 node, 1 CPU > > [   0.024811] Using standard scheduler topology > > [   0.030061] devtmpfs: initialized > > [   0.033704] random: get_random_u32 called from > > .bucket_table_alloc+0x170/0x1c0 with crng_init=0 > > [   0.035459] clocksource: jiffies: mask: 0xffffffff max_cycles: > > 0xffffffff, max_idle_ns: 1911260446275000 ns > > [   0.035764] futex hash table entries: 256 (order: 2, 16384 bytes) > > [   0.037098] xor: measuring software checksum speed > > [   0.046584]   8regs    : 2620.000 MB/sec > > [   0.056774]   8regs_prefetch: 2380.000 MB/sec > > [   0.066974]   32regs   : 2608.000 MB/sec > > [   0.077165]   32regs_prefetch: 2360.000 MB/sec > > [   0.077313] xor: using function: 8regs (2620.000 MB/sec) > > [   0.087868] NET: Registered protocol family 16 > > [   0.091070] cpuidle: using governor ladder > > [   0.091259] cpuidle: using governor menu > > [   0.097159] Machine: QEMU ppce500 > > [   0.097258] SoC family: QorIQ > > [   0.097343] SoC ID: svr:0x00000000, Revision: 0.0 > > [   0.111905] PCI: Probing PCI hardware > > [   0.216930] raid6: int64x1 gen() 1324 MB/s > > [   0.234228] raid6: int64x1 xor()  845 MB/s > > [   0.251545] raid6: int64x2 gen() 1718 MB/s > > [   0.268864] raid6: int64x2 xor() 1275 MB/s > > [   0.286186] raid6: int64x4 gen() 1800 MB/s > > [   0.303854] raid6: int64x4 xor() 1316 MB/s > > [   0.321316] raid6: int64x8 gen()  941 MB/s > > [   0.338625] raid6: int64x8 xor()  781 MB/s > > [   0.338752] raid6: using algorithm int64x4 gen() 1800 MB/s > > [   0.338900] raid6: .... xor() 1316 MB/s, rmw enabled > > [   0.339063] raid6: using intx1 recovery algorithm > > [   0.339817] Freescale Elo series DMA driver > > [   0.341262] vgaarb: loaded > > [   0.342302] SCSI subsystem initialized > > [   0.344113] usbcore: registered new interface driver usbfs > > [   0.344428] usbcore: registered new interface driver hub > > [   0.344684] usbcore: registered new device driver usb > > [   0.345268] pps_core: LinuxPPS API ver. 1 registered > > [   0.345404] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > > Rodolfo Giometti <giometti@linux.it> > > [   0.345695] PTP clock support registered > > [   0.348569] EDAC MC: Ver: 3.0.0 > > [   0.351386] Advanced Linux Sound Architecture Driver Initialized. > > [   0.355672] NET: Registered protocol family 8 > > [   0.355814] NET: Registered protocol family 20 > > [   0.359236] clocksource: Switched to clocksource timebase > > [   0.361400] FS-Cache: Loaded > > [   0.362211] CacheFiles: Loaded > > [   0.390263] NET: Registered protocol family 2 > > [   0.393486] tcp_listen_portaddr_hash hash table entries: 1024 > > (order: 2, 16384 bytes) > > [   0.393746] TCP established hash table entries: 16384 (order: 5, > > 131072 bytes) > > [   0.394154] TCP bind hash table entries: 16384 (order: 6, 262144 > > bytes) > > [   0.394505] TCP: Hash tables configured (established 16384 bind 16384) > > [   0.395361] UDP hash table entries: 1024 (order: 3, 32768 bytes) > > [   0.395637] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > > [   0.396638] NET: Registered protocol family 1 > > [   0.399430] RPC: Registered named UNIX socket transport module. > > [   0.399619] RPC: Registered udp transport module. > > [   0.399743] RPC: Registered tcp transport module. > > [   0.399867] RPC: Registered tcp NFSv4.1 backchannel transport module. > > [   0.406335] Initialise system trusted keyrings > > [   0.408668] workingset: timestamp_bitsb max_order\x19 bucket_order=0 > > [   0.416796] zbud: loaded > > [   0.420149] squashfs: version 4.0 (2009/01/31) Phillip Lougher > > [   0.436150] ntfs: driver 2.1.32 [Flags: R/W]. > > [   0.436705] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red > > Hat, Inc. > > [   0.438486] fuse init (API version 7.26) > > [   0.451573] NET: Registered protocol family 38 > > [   0.451885] async_tx: api initialized (async) > > [   0.452277] Key type asymmetric registered > > [   0.452455] Asymmetric key parser 'x509' registered > > [   0.452880] Block layer SCSI generic (bsg) driver version 0.4 > > loaded (major 249) > > [   0.453203] io scheduler noop registered > > [   0.453337] io scheduler deadline registered > > [   0.453651] io scheduler cfq registered (default) > > [   0.453798] io scheduler mq-deadline registered > > [   0.453962] io scheduler kyber registered > > [   0.455337] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 > > [   0.455484] crc32: self tests passed, processed 225944 bytes in > > 442445 nsec > > [   0.456221] crc32c: CRC_LE_BITS = 64 > > [   0.456327] crc32c: self tests passed, processed 225944 bytes in > > 226608 nsec > > [   0.486173] crc32_combine: 8373 self tests passed > > [   0.515206] crc32c_combine: 8373 self tests passed > > [   0.689268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > [   0.694784] console [ttyS0] disabled > > [   0.716358] serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, > > base_baud = 115200) is a 16550A > > [   0.717314] console [ttyS0] enabled > > [   0.717314] console [ttyS0] enabled > > [   0.717686] bootconsole [udbg0] disabled > > [   0.717686] bootconsole [udbg0] disabled > > [   0.719049] ePAPR hypervisor byte channel driver > > [   0.721125] [drm] radeon kernel modesetting enabled. > > [   0.746621] brd: module loaded > > [   0.759781] loop: module loaded > > [   0.761701] zram: Added device: zram0 > > [   0.771074] libphy: Fixed MDIO Bus: probed > > [   0.772711] PPP generic driver version 2.4.2 > > [   0.778222] PPP BSD Compression module registered > > [   0.778382] PPP Deflate Compression module registered > > [   0.778614] PPP MPPE Compression module registered > > [   0.778763] NET: Registered protocol family 24 > > [   0.780125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > [   0.780421] ehci-pci: EHCI PCI platform driver > > [   0.780682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > > [   0.781057] ohci-pci: OHCI PCI platform driver > > [   0.781671] ehci-fsl: Freescale EHCI Host controller driver > > [   0.781999] usbcore: registered new interface driver usblp > > [   0.782258] usbcore: registered new interface driver usb-storage > > [   0.782655] usbcore: registered new interface driver usbserial_generic > > [   0.783005] usbserial: USB Serial support registered for generic > > [   0.783247] usbcore: registered new interface driver ftdi_sio > > [   0.783465] usbserial: USB Serial support registered for FTDI USB > > Serial Device > > [   0.786824] mousedev: PS/2 mouse device common for all mice > > [   0.787567] i2c /dev entries driver > > [   0.793355] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) > > initialised: dm-devel@redhat.com > > [   0.793900] sdhci: Secure Digital Host Controller Interface driver > > [   0.794146] sdhci: Copyright(c) Pierre Ossman > > [   0.794353] sdhci-pltfm: SDHCI platform and OF driver helper > > [   0.796047] ledtrig-cpu: registered to indicate activity on CPUs > > [   0.796402] hidraw: raw HID events driver (C) Jiri Kosina > > [   0.798040] usbcore: registered new interface driver usbhid > > [   0.798199] usbhid: USB HID core driver > > [   0.798403] Freescale hypervisor management driver > > [   0.798544] fsl-hv: no hypervisor found > > [   0.816356] usbcore: registered new interface driver snd-usb-audio > > [   0.816614] usbcore: registered new interface driver snd-ua101 > > [   0.816845] usbcore: registered new interface driver snd-usb-usx2y > > [   0.817389] ipip: IPv4 and MPLS over IPv4 tunneling driver > > [   0.818797] IPv4 over IPsec tunneling driver > > [   0.820198] Initializing XFRM netlink socket > > [   0.821242] NET: Registered protocol family 10 > > [   0.830017] Segment Routing with IPv6 > > [   0.830723] mip6: Mobile IPv6 > > [   0.832292] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > > [   0.834447] NET: Registered protocol family 17 > > [   0.834691] NET: Registered protocol family 15 > > [   0.835396] lec:lane_module_init: lec.c: initialized > > [   0.835567] mpoa:atm_mpoa_init: mpc.c: initialized > > [   0.835763] l2tp_core: L2TP core driver, V2.0 > > [   0.840489] DCCP: Activated CCID 2 (TCP-like) > > [   0.840655] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) > > [   0.842064] sctp: Hash tables configured (bind 256/256) > > [   0.847782] NET: Registered protocol family 21 > > [   0.849268] Registered RDS/tcp transport > > [   0.849399] tipc: Activated (version 2.0.0) > > [   0.849674] NET: Registered protocol family 30 > > [   0.851092] tipc: Started in single node mode > > [   0.853171] Key type dns_resolver registered > > [   0.854525] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility > > version 15) loaded > > [   0.855060] drmem: No dynamic reconfiguration memory found > > [   0.856447] Loading compiled-in X.509 certificates > > [   0.857307] zswap: loaded using pool lzo/zbud > > [   0.860584] Btrfs loaded, crc32c=crc32c-generic > > [   0.863663] Key type encrypted registered > > [   0.864688] hctosys: unable to open rtc device (rtc0) > > [   0.865363] ALSA device list: > > [   0.865462]  #0: Virtual MIDI Card 1 > > [   0.869543] md: Waiting for all devices to be available before > > autodetect > > [   0.869723] md: If you don't use raid, use raid=noautodetect > > [   0.872156] md: Autodetecting RAID arrays. > > [   0.872294] md: autorun ... > > [   0.872379] md: ... autorun DONE. > > [   0.874278] VFS: Cannot open root device "vda3" or > > unknown-block(0,0): error -6 > > [   0.874465] Please append a correct "root=" boot option; here are > > the available partitions: > > [   0.874760] 0100         131072 ram0 > > [   0.874792] (driver?) > > [   0.875039] 0101         131072 ram1 > > [   0.875045] (driver?) > > [   0.875206] 0102         131072 ram2 > > [   0.875211] (driver?) > > [   0.875367] 0103         131072 ram3 > > [   0.875371] (driver?) > > [   0.875526] 0104         131072 ram4 > > [   0.875530] (driver?) > > [   0.875683] 0105         131072 ram5 > > [   0.875687] (driver?) > > [   0.875840] 0106         131072 ram6 > > [   0.875844] (driver?) > > [   0.876042] 0107         131072 ram7 > > [   0.876047] (driver?) > > [   0.876206] 0108         131072 ram8 > > [   0.876210] (driver?) > > [   0.876365] 0109         131072 ram9 > > [   0.876369] (driver?) > > [   0.876522] 010a         131072 ram10 > > [   0.876526] (driver?) > > [   0.876680] 010b         131072 ram11 > > [   0.876684] (driver?) > > [   0.876839] 010c         131072 ram12 > > [   0.876843] (driver?) > > [   0.877055] 010d         131072 ram13 > > [   0.877060] (driver?) > > [   0.877218] 010e         131072 ram14 > > [   0.877222] (driver?) > > [   0.877376] 010f         131072 ram15 > > [   0.877380] (driver?) > > [   0.877622] Kernel panic - not syncing: VFS: Unable to mount root > > fs on unknown-block(0,0) > > [   0.878241] Rebooting in 180 seconds.. > > > OK, I figured out, that the kernel doesn't detect any virtio device. I > enabled the devices in the kernel config. Maybe another kernel option is > missing. Any ideas? > Yeah, I was thinking about something like that as well... unfortunately, I'm not familiar with ppce500 boards and I don't know what drivers are needed... > -- Christian > ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 12:33 ` Christian Zigotzky @ 2018-05-18 16:47 ` Thomas Huth -1 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-18 16:47 UTC (permalink / raw) To: Christian Zigotzky, Greg Kurz Cc: qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18.05.2018 14:33, Christian Zigotzky wrote: > On 18 May 2018 at 2:16PM, Greg Kurz wrote: >> On Fri, 18 May 2018 13:50:42 +0200 >> Christian Zigotzky <chzigotzky@xenosoft.de> wrote: >> >>> On 18 May 2018 at 1:13PM, Greg Kurz wrote: >>>> And of course your kernel should be built with virtio support. >>> I think I have enabled virtio support. Please find attached my kernel >>> config. >>> >> Indeed, what about passing root=/dev/vda3 to the kernel ? >> > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -drive > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > -net nic,vlan=0,model=e1000 -net user,vlan=0 -append "rw root=/dev/vda3" > -machine dt_compatible=fsl,,P5020DS > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > if=none,id=c1,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,drive=c1 -append "root=/dev/vda3" > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -drive > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -append "root=/dev/vda3" > > Output: > > [ 0.000000] MMU: Supported page sizes > [ 0.000000] 4 KB as direct > [ 0.000000] 4096 KB as direct > [ 0.000000] 16384 KB as direct > [ 0.000000] 65536 KB as direct > [ 0.000000] 262144 KB as direct > [ 0.000000] 1048576 KB as direct > [ 0.000000] MMU: Book3E HW tablewalk not supported > [ 0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 > (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 > (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 > [ 0.000000] Using CoreNet Generic machine description No clue, so just a blind guess: Is "CoreNet Generic" the right machine? What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-18 16:47 ` Thomas Huth 0 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-18 16:47 UTC (permalink / raw) To: Christian Zigotzky, Greg Kurz Cc: qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc On 18.05.2018 14:33, Christian Zigotzky wrote: > On 18 May 2018 at 2:16PM, Greg Kurz wrote: >> On Fri, 18 May 2018 13:50:42 +0200 >> Christian Zigotzky <chzigotzky@xenosoft.de> wrote: >> >>> On 18 May 2018 at 1:13PM, Greg Kurz wrote: >>>> And of course your kernel should be built with virtio support. >>> I think I have enabled virtio support. Please find attached my kernel >>> config. >>> >> Indeed, what about passing root=/dev/vda3 to the kernel ? >> > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -drive > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > -net nic,vlan=0,modelá000 -net user,vlan=0 -append "rw root=/dev/vda3" > -machine dt_compatible=fsl,,P5020DS > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -device virtio-scsi -drive > if=none,idÁ,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -device scsi-cd,driveÁ -append "root=/dev/vda3" > > or > > ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel > /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 > -machine dt_compatible=fsl,,P5020DS -drive > if=virtio,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img > -append "root=/dev/vda3" > > Output: > > [Â Â Â 0.000000] MMU: Supported page sizes > [Â Â Â 0.000000]Â Â Â Â Â Â Â Â Â 4 KB as direct > [Â Â Â 0.000000]Â Â Â Â Â Â 4096 KB as direct > [Â Â Â 0.000000]Â Â Â Â Â 16384 KB as direct > [Â Â Â 0.000000]Â Â Â Â Â 65536 KB as direct > [Â Â Â 0.000000]Â Â Â Â 262144 KB as direct > [Â Â Â 0.000000]Â Â Â 1048576 KB as direct > [Â Â Â 0.000000] MMU: Book3E HW tablewalk not supported > [Â Â Â 0.000000] Linux version 4.17.0-rc5_A-EON_A1-X5000 > (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 > (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Mon May 14 09:34:52 CEST 2018 > [Â Â Â 0.000000] Using CoreNet Generic machine description No clue, so just a blind guess: Is "CoreNet Generic" the right machine? What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 16:47 ` Thomas Huth @ 2018-05-19 4:58 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-19 4:58 UTC (permalink / raw) To: Thomas Huth; +Cc: Greg Kurz, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc Thomas wrote: No clue, so just a blind guess: Is "CoreNet Generic" the right machine? What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? Thomas —— I think it‘s the right machine. CONFIG_CORENET_GENERIC: This option enables support for the FSL CoreNet based boards. For 32bit kernel, the following boards are supported: P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080 For 64bit kernel, the following boards are supported: T208x QDS/RDB, T4240 QDS/RDB and B4 QDS The following boards are supported for both 32bit and 64bit kernel: P5020 DS, P5040 DS, T102x QDS/RDB, T104x QDS/RDB Any other ideas? — Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-19 4:58 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-19 4:58 UTC (permalink / raw) To: Thomas Huth; +Cc: Greg Kurz, qemu-devel, kvm-ppc, Alexander Graf, qemu-ppc Thomas wrote: No clue, so just a blind guess: Is "CoreNet Generic" the right machine? What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? Thomas —— I think it‘s the right machine. CONFIG_CORENET_GENERIC: This option enables support for the FSL CoreNet based boards. For 32bit kernel, the following boards are supported: P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080 For 64bit kernel, the following boards are supported: T208x QDS/RDB, T4240 QDS/RDB and B4 QDS The following boards are supported for both 32bit and 64bit kernel: P5020 DS, P5040 DS, T102x QDS/RDB, T104x QDS/RDB Any other ideas? — Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [Qemu-ppc] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-19 4:58 ` Christian Zigotzky @ 2018-05-19 6:15 ` Thomas Huth -1 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-19 6:15 UTC (permalink / raw) To: Christian Zigotzky; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel On 19.05.2018 06:58, Christian Zigotzky wrote: > Thomas wrote: > > > No clue, so just a blind guess: Is "CoreNet Generic" the right machine? > > What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? > > I think it‘s the right machine. It's likely the right selection for the real hardware, but it's maybe the wrong machine type for the QEMU ppce500 machine. Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-ppc] [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-19 6:15 ` Thomas Huth 0 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-19 6:15 UTC (permalink / raw) To: Christian Zigotzky; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel On 19.05.2018 06:58, Christian Zigotzky wrote: > Thomas wrote: > > > No clue, so just a blind guess: Is "CoreNet Generic" the right machine? > > What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? > > I think it‘s the right machine. It's likely the right selection for the real hardware, but it's maybe the wrong machine type for the QEMU ppce500 machine. Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [Qemu-ppc] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-19 6:15 ` [Qemu-ppc] [Qemu-devel] " Thomas Huth @ 2018-05-19 14:03 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-19 14:03 UTC (permalink / raw) To: Thomas Huth; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel On 19 May 2018 at 08:15AM, Thomas Huth wrote: > On 19.05.2018 06:58, Christian Zigotzky wrote: >> Thomas wrote: >> >>> No clue, so just a blind guess: Is "CoreNet Generic" the right machine? >>> What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? >> I think it‘s the right machine. > It's likely the right selection for the real hardware, but it's maybe > the wrong machine type for the QEMU ppce500 machine. > > Thomas > Hello Thomas, Thanks for your reply. I compiled the RC5 of kernel 4.17 without corenet generic support today. ubuntu MATE 16.04 LTS PowerPC boots!!!!!!!!! qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/uImage-4.17-without_corenet -drive file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -net nic,vlan=0,model=e1000 -net user,vlan=0 -append "rw root=/dev/vda3" With the following command I can boot it with a VirtIO graphics cards. qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel /home/christian/Downloads/uImage-4.17-without_corenet -drive file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -net nic,vlan=0,model=e1000 -net user,vlan=0 -append "rw root=/dev/vda3" -device virtio-vga Unfortunately mouse and keyboard doesn't work in the virtual machine. Many thanks for your help! :-) Have a nice weekend! :-) Cheers, Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-ppc] [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-19 14:03 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-19 14:03 UTC (permalink / raw) To: Thomas Huth; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel On 19 May 2018 at 08:15AM, Thomas Huth wrote: > On 19.05.2018 06:58, Christian Zigotzky wrote: >> Thomas wrote: >> >>> No clue, so just a blind guess: Is "CoreNet Generic" the right machine? >>> What happens if you set "CONFIG_CORENET_GENERIC=n" in your kernel config? >> I think it‘s the right machine. > It's likely the right selection for the real hardware, but it's maybe > the wrong machine type for the QEMU ppce500 machine. > > Thomas > Hello Thomas, Thanks for your reply. I compiled the RC5 of kernel 4.17 without corenet generic support today. ubuntu MATE 16.04 LTS PowerPC boots!!!!!!!!! qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -nographic -kernel /home/christian/Downloads/uImage-4.17-without_corenet -drive file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -net nic,vlan=0,modelá000 -net user,vlan=0 -append "rw root=/dev/vda3" With the following command I can boot it with a VirtIO graphics cards. qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel /home/christian/Downloads/uImage-4.17-without_corenet -drive file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -net nic,vlan=0,modelá000 -net user,vlan=0 -append "rw root=/dev/vda3" -device virtio-vga Unfortunately mouse and keyboard doesn't work in the virtual machine. Many thanks for your help! :-) Have a nice weekend! :-) Cheers, Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [Qemu-ppc] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-19 14:03 ` [Qemu-ppc] [Qemu-devel] " Christian Zigotzky @ 2018-05-19 15:19 ` Thomas Huth -1 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-19 15:19 UTC (permalink / raw) To: Christian Zigotzky; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel Am Sat, 19 May 2018 16:03:02 +0200 schrieb Christian Zigotzky <chzigotzky@xenosoft.de>: > On 19 May 2018 at 08:15AM, Thomas Huth wrote: > > On 19.05.2018 06:58, Christian Zigotzky wrote: > >> Thomas wrote: > >> > >>> No clue, so just a blind guess: Is "CoreNet Generic" the right > >>> machine? What happens if you set "CONFIG_CORENET_GENERIC=n" in > >>> your kernel config? > >> I think it‘s the right machine. > > It's likely the right selection for the real hardware, but it's > > maybe the wrong machine type for the QEMU ppce500 machine. > > > > Thomas > > > Hello Thomas, > > Thanks for your reply. I compiled the RC5 of kernel 4.17 without > corenet generic support today. ubuntu MATE 16.04 LTS PowerPC > boots!!!!!!!!! Cool! :-) > With the following command I can boot it with a VirtIO graphics cards. > > qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel > /home/christian/Downloads/uImage-4.17-without_corenet -drive > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > -net nic,vlan=0,model=e1000 -net user,vlan=0 -append "rw > root=/dev/vda3" -device virtio-vga Note that "vlan=0" won't work with the next version (2.13) of QEMU anymore. But since that's the default, you can simply omit that "vlan=0" in both -net options. Or if you are using the latest and greatest QEMU v2.12 already, you can also use "-nic user,model=e1000" instead. > Unfortunately mouse and keyboard doesn't work in the virtual machine. I guess with the ppce500 machine, you've also got to specify them manually, too. You've got two options, virtio and USB. For virtio, try: -device virtio-mouse-pci -device virtio-keyboard-pci And for USB, try something like: -device qemu-xhci -device usb-mouse -device usb-kbd If "qemu-xhci" does not work, you could also try "pci-ohci" instead. HTH, Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-ppc] [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-19 15:19 ` Thomas Huth 0 siblings, 0 replies; 35+ messages in thread From: Thomas Huth @ 2018-05-19 15:19 UTC (permalink / raw) To: Christian Zigotzky; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel Am Sat, 19 May 2018 16:03:02 +0200 schrieb Christian Zigotzky <chzigotzky@xenosoft.de>: > On 19 May 2018 at 08:15AM, Thomas Huth wrote: > > On 19.05.2018 06:58, Christian Zigotzky wrote: > >> Thomas wrote: > >> > >>> No clue, so just a blind guess: Is "CoreNet Generic" the right > >>> machine? What happens if you set "CONFIG_CORENET_GENERIC=n" in > >>> your kernel config? > >> I think it‘s the right machine. > > It's likely the right selection for the real hardware, but it's > > maybe the wrong machine type for the QEMU ppce500 machine. > > > > Thomas > > > Hello Thomas, > > Thanks for your reply. I compiled the RC5 of kernel 4.17 without > corenet generic support today. ubuntu MATE 16.04 LTS PowerPC > boots!!!!!!!!! Cool! :-) > With the following command I can boot it with a VirtIO graphics cards. > > qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel > /home/christian/Downloads/uImage-4.17-without_corenet -drive > file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio > -net nic,vlan=0,modelá000 -net user,vlan=0 -append "rw > root=/dev/vda3" -device virtio-vga Note that "vlan=0" won't work with the next version (2.13) of QEMU anymore. But since that's the default, you can simply omit that "vlan=0" in both -net options. Or if you are using the latest and greatest QEMU v2.12 already, you can also use "-nic user,modelá000" instead. > Unfortunately mouse and keyboard doesn't work in the virtual machine. I guess with the ppce500 machine, you've also got to specify them manually, too. You've got two options, virtio and USB. For virtio, try: -device virtio-mouse-pci -device virtio-keyboard-pci And for USB, try something like: -device qemu-xhci -device usb-mouse -device usb-kbd If "qemu-xhci" does not work, you could also try "pci-ohci" instead. HTH, Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-devel] [Qemu-ppc] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-19 15:19 ` [Qemu-ppc] [Qemu-devel] " Thomas Huth @ 2018-05-20 18:51 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-20 18:51 UTC (permalink / raw) To: Thomas Huth; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel On 19 May 2018 at 5:19PM, Thomas Huth wrote: > On Sat, 19 May 2018 16:03:02 +0200 > Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > > >> Unfortunately mouse and keyboard doesn't work in the virtual machine. > I guess with the ppce500 machine, you've also got to specify them > manually, too. You've got two options, virtio and USB. For virtio, try: > > -device virtio-mouse-pci -device virtio-keyboard-pci > > And for USB, try something like: > > -device qemu-xhci -device usb-mouse -device usb-kbd > > If "qemu-xhci" does not work, you could also try "pci-ohci" instead. > > HTH, > Thomas > Yes, you're right. Mouse and keyboard work! Screenshot: https://plus.google.com/u/0/photos/photo/115515624056477014971/6557728521525034386 Many thanks for your help! :-) ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [Qemu-ppc] [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-20 18:51 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-20 18:51 UTC (permalink / raw) To: Thomas Huth; +Cc: qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel On 19 May 2018 at 5:19PM, Thomas Huth wrote: > On Sat, 19 May 2018 16:03:02 +0200 > Christian Zigotzky <chzigotzky@xenosoft.de> wrote: > > >> Unfortunately mouse and keyboard doesn't work in the virtual machine. > I guess with the ppce500 machine, you've also got to specify them > manually, too. You've got two options, virtio and USB. For virtio, try: > > -device virtio-mouse-pci -device virtio-keyboard-pci > > And for USB, try something like: > > -device qemu-xhci -device usb-mouse -device usb-kbd > > If "qemu-xhci" does not work, you could also try "pci-ohci" instead. > > HTH, > Thomas > Yes, you're right. Mouse and keyboard work! Screenshot: https://plus.google.com/u/0/photos/photo/115515624056477014971/6557728521525034386 Many thanks for your help! :-) ^ permalink raw reply [flat|nested] 35+ messages in thread
* [Qemu-devel] [Qemu-ppc] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-19 15:19 ` [Qemu-ppc] [Qemu-devel] " Thomas Huth @ 2018-05-23 10:31 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-23 10:31 UTC (permalink / raw) To: Thomas Huth, qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel Hi All, I would like to say thank you for your help. My virtual e5500 PowerPC machine works without any problems on my PC. I can use ubuntu MATE 16.04 LTS PowerPC with the RC6 of kernel 4.17 in a virtual e5500 QEMU 2.12.0 machine with a VirtIO graphics card and with a connection to the network. Screenshot: https://plus.google.com/u/0/photos/photo/115515624056477014971/6558706783010232546 Command: /home/christian/Downloads/qemu-2.12.0/ppc64-softmmu/qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel /home/christian/Downloads/uImage-4.17-QEMU-e1000 -drive format=raw,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -nic user,model=e1000 -append "rw root=/dev/vda3" -device virtio-vga -device virtio-mouse-pci -device virtio-keyboard-pci Cheers, Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* [Qemu-ppc] [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? @ 2018-05-23 10:31 ` Christian Zigotzky 0 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-23 10:31 UTC (permalink / raw) To: Thomas Huth, qemu-ppc, Greg Kurz, kvm-ppc, qemu-devel Hi All, I would like to say thank you for your help. My virtual e5500 PowerPC machine works without any problems on my PC. I can use ubuntu MATE 16.04 LTS PowerPC with the RC6 of kernel 4.17 in a virtual e5500 QEMU 2.12.0 machine with a VirtIO graphics card and with a connection to the network. Screenshot: https://plus.google.com/u/0/photos/photo/115515624056477014971/6558706783010232546 Command: /home/christian/Downloads/qemu-2.12.0/ppc64-softmmu/qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel /home/christian/Downloads/uImage-4.17-QEMU-e1000 -drive format=raw,file=/home/christian/Dokumente/ubuntu_MATE_16.04.3_LTS_PowerPC_QEMU/ubuntu_MATE_16.04_PowerPC.img,index=0,if=virtio -nic user,modelá000 -append "rw root=/dev/vda3" -device virtio-vga -device virtio-mouse-pci -device virtio-keyboard-pci Cheers, Christian ^ permalink raw reply [flat|nested] 35+ messages in thread
* [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? 2018-05-18 8:54 ` Thomas Huth (?) (?) @ 2018-05-18 9:13 ` Christian Zigotzky -1 siblings, 0 replies; 35+ messages in thread From: Christian Zigotzky @ 2018-05-18 9:13 UTC (permalink / raw) To: kvm-ppc It works on my AmigaOne X5000 (P5020 board with 2x e5500 cores). Screenshots: https://plus.google.com/115515624056477014971 — Christian Sent from my iPhone On 18. May 2018, at 10:54, Thomas Huth <huth@tuxfamily.org> wrote: On 18.05.2018 08:01, Christian Zigotzky wrote: Hello, I was able to boot a Linux kernel (uImage) with an initrd in a virtual P5020DS PPC64 machine with an e5500 core (QEMU 2.12.0) with the following command. qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -initrd /home/christian/Downloads/slitaz25.gz -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" It also works with the machine 'MPC8544DS': qemu-system-ppc64 -M mpc8544ds -cpu e5500 -m 2048 -initrd /home/christian/Downloads/slitaz25.gz -nographic -kernel /home/christian/Downloads/vmlinux-4.17-rc5-AmigaOne_X1000_X5000/X5000/uImage-4.17 -net nic,vlan=0,model=e1000 -net user,vlan=0 -machine dt_compatible=fsl,,P5020DS -append "root=/dev/ramdisk" These two machines ppce500 and mpc8544ds are "embedded" PowerPC machines... I tried to boot ubuntu MATE 16.04 LTS PowerPC from an img with the option '-drive' but without any success. Is it possible to boot from a hard disk img with a virtual P5020DS PPC64 machine? Can I use a virtual graphics card with this machine? ... but according to http://cdimage.ubuntu.com/releases/16.04/release/ Ubuntu 16.04 is for Apple and IBM machines only, so I don't think that you'll be able to run this on an embedded PPC machine? Thomas ^ permalink raw reply [flat|nested] 35+ messages in thread
end of thread, other threads:[~2018-05-23 10:32 UTC | newest] Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-05-18 6:01 [Qemu-devel] [PPC64] P5020DS: Booting from img possible (-drive)? Christian Zigotzky 2018-05-18 6:01 ` Christian Zigotzky 2018-05-18 8:54 ` [Qemu-devel] " Thomas Huth 2018-05-18 8:54 ` Thomas Huth 2018-05-18 9:06 ` Christian Zigotzky 2018-05-18 9:24 ` Thomas Huth 2018-05-18 9:24 ` Thomas Huth 2018-05-18 10:30 ` Christian Zigotzky 2018-05-18 10:30 ` Christian Zigotzky 2018-05-18 11:13 ` Greg Kurz 2018-05-18 11:13 ` Greg Kurz 2018-05-18 11:50 ` Christian Zigotzky 2018-05-18 12:16 ` Greg Kurz 2018-05-18 12:16 ` Greg Kurz 2018-05-18 12:33 ` Christian Zigotzky 2018-05-18 12:33 ` Christian Zigotzky 2018-05-18 13:38 ` Christian Zigotzky 2018-05-18 13:38 ` Christian Zigotzky 2018-05-18 14:03 ` Greg Kurz 2018-05-18 14:03 ` Greg Kurz 2018-05-18 16:47 ` Thomas Huth 2018-05-18 16:47 ` Thomas Huth 2018-05-19 4:58 ` Christian Zigotzky 2018-05-19 4:58 ` Christian Zigotzky 2018-05-19 6:15 ` [Qemu-devel] [Qemu-ppc] " Thomas Huth 2018-05-19 6:15 ` [Qemu-ppc] [Qemu-devel] " Thomas Huth 2018-05-19 14:03 ` [Qemu-devel] [Qemu-ppc] " Christian Zigotzky 2018-05-19 14:03 ` [Qemu-ppc] [Qemu-devel] " Christian Zigotzky 2018-05-19 15:19 ` [Qemu-devel] [Qemu-ppc] " Thomas Huth 2018-05-19 15:19 ` [Qemu-ppc] [Qemu-devel] " Thomas Huth 2018-05-20 18:51 ` [Qemu-devel] [Qemu-ppc] " Christian Zigotzky 2018-05-20 18:51 ` [Qemu-ppc] [Qemu-devel] " Christian Zigotzky 2018-05-23 10:31 ` [Qemu-devel] [Qemu-ppc] " Christian Zigotzky 2018-05-23 10:31 ` [Qemu-ppc] [Qemu-devel] " Christian Zigotzky 2018-05-18 9:13 ` Christian Zigotzky
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.