[PATCH] ata: Use platform_get_irq() to get the interrupt

[PATCH] ata: Use platform_get_irq() to get the interrupt

[cgel.zte]

From: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
---
 drivers/ata/pata_pxa.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index 41430f79663c..6394ab4cbc1b 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -164,10 +164,10 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	struct resource *cmd_res;
 	struct resource *ctl_res;
 	struct resource *dma_res;
-	struct resource *irq_res;
 	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct dma_slave_config	config;
 	int ret = 0;
+	int irq;
 
 	/*
 	 * Resource validation, three resources are needed:
@@ -205,8 +205,8 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	/*
 	 * IRQ pin
 	 */
-	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(irq_res == NULL))
+	irq = platform_get_irq(pdev, 0);
+	if (unlikely(irq < 0))
 		return -EINVAL;
 
 	/*
@@ -287,7 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	/*
 	 * Activate the ATA host
 	 */
-	ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
+	ret = ata_host_activate(host, irq, ata_sff_interrupt,
 				pdata->irq_flags, &pxa_ata_sht);
 	if (ret)
 		dma_release_channel(data->dma_chan);
-- 
2.25.1

Re: [PATCH] ata: Use platform_get_irq() to get the interrupt

[Damien Le Moal]

On 3/8/22 11:59, cgel.zte@gmail.com wrote:
> From: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
> 
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypassed the hierarchical setup and messed up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
> 
> Reported-by: Zeal Robot <zealci@zte.com.cn>
> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
> ---
>  drivers/ata/pata_pxa.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
> index 41430f79663c..6394ab4cbc1b 100644
> --- a/drivers/ata/pata_pxa.c
> +++ b/drivers/ata/pata_pxa.c
> @@ -164,10 +164,10 @@ static int pxa_ata_probe(struct platform_device *pdev)
>  	struct resource *cmd_res;
>  	struct resource *ctl_res;
>  	struct resource *dma_res;
> -	struct resource *irq_res;
>  	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
>  	struct dma_slave_config	config;
>  	int ret = 0;
> +	int irq;
>  
>  	/*
>  	 * Resource validation, three resources are needed:
> @@ -205,8 +205,8 @@ static int pxa_ata_probe(struct platform_device *pdev)
>  	/*
>  	 * IRQ pin
>  	 */
> -	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (unlikely(irq_res == NULL))
> +	irq = platform_get_irq(pdev, 0);
> +	if (unlikely(irq < 0))

This is not the hot path, so let's simplify: drop the unlikely() from
this if.

>  		return -EINVAL;
>  
>  	/*
> @@ -287,7 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
>  	/*
>  	 * Activate the ATA host
>  	 */
> -	ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
> +	ret = ata_host_activate(host, irq, ata_sff_interrupt,
>  				pdata->irq_flags, &pxa_ata_sht);
>  	if (ret)
>  		dma_release_channel(data->dma_chan);


-- 
Damien Le Moal
Western Digital Research

Re: [PATCH] ata: Use platform_get_irq() to get the interrupt

[Sergey Shtylyov]

Hello!

   Please be more specific in the subject: s/ata:/pata_pxa:/.

On 3/8/22 5:59 AM, cgel.zte@gmail.com wrote:

> From: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
> 
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypassed the hierarchical setup and messed up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
> 
> Reported-by: Zeal Robot <zealci@zte.com.cn>
> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
> ---
>  drivers/ata/pata_pxa.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
> index 41430f79663c..6394ab4cbc1b 100644
> --- a/drivers/ata/pata_pxa.c
> +++ b/drivers/ata/pata_pxa.c
[...]
> @@ -205,8 +205,8 @@ static int pxa_ata_probe(struct platform_device *pdev)
>  	/*
>  	 * IRQ pin
>  	 */
> -	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (unlikely(irq_res == NULL))
> +	irq = platform_get_irq(pdev, 0);
> +	if (unlikely(irq < 0))
>  		return -EINVAL;

   Why did you not switch to returning 'irq'? The way it is now, the deferred
probing doesn't work...

[...]

MBR, Sergey