* [PATCH V2 0/4] pinctrl: Add SPEAr pinctrl support
@ 2012-04-04 11:35 Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 1/4] SPEAr: Remove existing padmux support for SPEAr Viresh Kumar
` (3 more replies)
0 siblings, 4 replies; 10+ messages in thread
From: Viresh Kumar @ 2012-04-04 11:35 UTC (permalink / raw)
To: linux-arm-kernel
This patchset replaces existing pinmux framework for SPEAr family of SoC with
generic pinctrl framework.
V1->V2
- Earlier padmux support removed
- single patch for spear pinctrl drivers broken into two: one for spear and
other for 3xx family
- add pinctrl support in arch/arm/mach-spear3xx/ and dts files
- pinctrl-spear.* made as library instead of platform driver
- pinctrl-spear300, spear310, spear320 are now platform drivers
- other minor fixes.
Viresh Kumar (4):
SPEAr: Remove existing padmux support for SPEAr
pinctrl: Add SPEAr pinctrl drivers
pinctrl: Add SPEAr3xx pinctrl drivers
SPEAr3xx: Add pinctrl support for boards
.../devicetree/bindings/pinmux/pinmux_spear.txt | 28 +
MAINTAINERS | 23 +-
arch/arm/boot/dts/spear300-evb.dts | 4 +
arch/arm/boot/dts/spear300.dtsi | 5 +
arch/arm/boot/dts/spear310.dtsi | 5 +
arch/arm/boot/dts/spear320-evb.dts | 4 +
arch/arm/boot/dts/spear320.dtsi | 7 +-
arch/arm/mach-spear3xx/Kconfig | 3 +
arch/arm/mach-spear3xx/include/mach/generic.h | 128 -
arch/arm/mach-spear3xx/spear300.c | 408 +---
arch/arm/mach-spear3xx/spear310.c | 185 +-
arch/arm/mach-spear3xx/spear320.c | 426 +---
arch/arm/mach-spear3xx/spear3xx.c | 425 ---
arch/arm/plat-spear/Kconfig | 1 +
arch/arm/plat-spear/Makefile | 2 +-
arch/arm/plat-spear/include/plat/padmux.h | 92 -
arch/arm/plat-spear/padmux.c | 164 -
drivers/pinctrl/Kconfig | 2 +
drivers/pinctrl/Makefile | 2 +
drivers/pinctrl/spear/Kconfig | 34 +
drivers/pinctrl/spear/Makefile | 7 +
drivers/pinctrl/spear/pinctrl-spear.c | 301 ++
drivers/pinctrl/spear/pinctrl-spear.h | 142 +
drivers/pinctrl/spear/pinctrl-spear300.c | 708 ++++
drivers/pinctrl/spear/pinctrl-spear310.c | 431 +++
drivers/pinctrl/spear/pinctrl-spear320.c | 3468 ++++++++++++++++++++
drivers/pinctrl/spear/pinctrl-spear3xx.c | 621 ++++
drivers/pinctrl/spear/pinctrl-spear3xx.h | 102 +
28 files changed, 5961 insertions(+), 1767 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinmux/pinmux_spear.txt
delete mode 100644 arch/arm/plat-spear/include/plat/padmux.h
delete mode 100644 arch/arm/plat-spear/padmux.c
create mode 100644 drivers/pinctrl/spear/Kconfig
create mode 100644 drivers/pinctrl/spear/Makefile
create mode 100644 drivers/pinctrl/spear/pinctrl-spear.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear.h
create mode 100644 drivers/pinctrl/spear/pinctrl-spear300.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear310.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear320.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear3xx.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear3xx.h
--
1.7.9
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2 1/4] SPEAr: Remove existing padmux support for SPEAr
2012-04-04 11:35 [PATCH V2 0/4] pinctrl: Add SPEAr pinctrl support Viresh Kumar
@ 2012-04-04 11:35 ` Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 2/4] pinctrl: Add SPEAr pinctrl drivers Viresh Kumar
` (2 subsequent siblings)
3 siblings, 0 replies; 10+ messages in thread
From: Viresh Kumar @ 2012-04-04 11:35 UTC (permalink / raw)
To: linux-arm-kernel
We must use pinctrl framework instead of defining per SoC pinmux drivers. This
patch removes existing padmux support present for SPEAr platform.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
arch/arm/mach-spear3xx/include/mach/generic.h | 128 --------
arch/arm/mach-spear3xx/spear300.c | 389 +----------------------
arch/arm/mach-spear3xx/spear310.c | 161 +----------
arch/arm/mach-spear3xx/spear320.c | 403 +-----------------------
arch/arm/mach-spear3xx/spear3xx.c | 425 -------------------------
arch/arm/plat-spear/Makefile | 2 +-
arch/arm/plat-spear/include/plat/padmux.h | 92 ------
arch/arm/plat-spear/padmux.c | 164 ----------
8 files changed, 4 insertions(+), 1760 deletions(-)
delete mode 100644 arch/arm/plat-spear/include/plat/padmux.h
delete mode 100644 arch/arm/plat-spear/padmux.c
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index a756958..9603bf4 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -20,7 +20,6 @@
#include <linux/amba/bus.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <plat/padmux.h>
/* spear3xx declarations */
/*
@@ -43,147 +42,20 @@ void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
-/* pad mux declarations */
-#define PMX_FIRDA_MASK (1 << 14)
-#define PMX_I2C_MASK (1 << 13)
-#define PMX_SSP_CS_MASK (1 << 12)
-#define PMX_SSP_MASK (1 << 11)
-#define PMX_MII_MASK (1 << 10)
-#define PMX_GPIO_PIN0_MASK (1 << 9)
-#define PMX_GPIO_PIN1_MASK (1 << 8)
-#define PMX_GPIO_PIN2_MASK (1 << 7)
-#define PMX_GPIO_PIN3_MASK (1 << 6)
-#define PMX_GPIO_PIN4_MASK (1 << 5)
-#define PMX_GPIO_PIN5_MASK (1 << 4)
-#define PMX_UART0_MODEM_MASK (1 << 3)
-#define PMX_UART0_MASK (1 << 2)
-#define PMX_TIMER_3_4_MASK (1 << 1)
-#define PMX_TIMER_1_2_MASK (1 << 0)
-
-/* pad mux devices */
-extern struct pmx_dev spear3xx_pmx_firda;
-extern struct pmx_dev spear3xx_pmx_i2c;
-extern struct pmx_dev spear3xx_pmx_ssp_cs;
-extern struct pmx_dev spear3xx_pmx_ssp;
-extern struct pmx_dev spear3xx_pmx_mii;
-extern struct pmx_dev spear3xx_pmx_gpio_pin0;
-extern struct pmx_dev spear3xx_pmx_gpio_pin1;
-extern struct pmx_dev spear3xx_pmx_gpio_pin2;
-extern struct pmx_dev spear3xx_pmx_gpio_pin3;
-extern struct pmx_dev spear3xx_pmx_gpio_pin4;
-extern struct pmx_dev spear3xx_pmx_gpio_pin5;
-extern struct pmx_dev spear3xx_pmx_uart0_modem;
-extern struct pmx_dev spear3xx_pmx_uart0;
-extern struct pmx_dev spear3xx_pmx_timer_3_4;
-extern struct pmx_dev spear3xx_pmx_timer_1_2;
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* padmux plgpio devices */
-extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
-extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
-extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
-extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
-extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
-extern struct pmx_dev spear3xx_pmx_plgpio_28;
-extern struct pmx_dev spear3xx_pmx_plgpio_29;
-extern struct pmx_dev spear3xx_pmx_plgpio_30;
-extern struct pmx_dev spear3xx_pmx_plgpio_31;
-extern struct pmx_dev spear3xx_pmx_plgpio_32;
-extern struct pmx_dev spear3xx_pmx_plgpio_33;
-extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
-extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
-extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
-extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
-#endif
-
/* spear300 declarations */
#ifdef CONFIG_MACH_SPEAR300
-/* pad mux modes */
-extern struct pmx_mode spear300_nand_mode;
-extern struct pmx_mode spear300_nor_mode;
-extern struct pmx_mode spear300_photo_frame_mode;
-extern struct pmx_mode spear300_lend_ip_phone_mode;
-extern struct pmx_mode spear300_hend_ip_phone_mode;
-extern struct pmx_mode spear300_lend_wifi_phone_mode;
-extern struct pmx_mode spear300_hend_wifi_phone_mode;
-extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
-extern struct pmx_mode spear300_ata_pabx_i2s_mode;
-extern struct pmx_mode spear300_caml_lcdw_mode;
-extern struct pmx_mode spear300_camu_lcd_mode;
-extern struct pmx_mode spear300_camu_wlcd_mode;
-extern struct pmx_mode spear300_caml_lcd_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear300_pmx_fsmc_2_chips;
-extern struct pmx_dev spear300_pmx_fsmc_4_chips;
-extern struct pmx_dev spear300_pmx_keyboard;
-extern struct pmx_dev spear300_pmx_clcd;
-extern struct pmx_dev spear300_pmx_telecom_gpio;
-extern struct pmx_dev spear300_pmx_telecom_tdm;
-extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
-extern struct pmx_dev spear300_pmx_telecom_camera;
-extern struct pmx_dev spear300_pmx_telecom_dac;
-extern struct pmx_dev spear300_pmx_telecom_i2s;
-extern struct pmx_dev spear300_pmx_telecom_boot_pins;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
-extern struct pmx_dev spear300_pmx_gpio1;
-
-/* Add spear300 machine declarations here */
void __init spear300_clk_init(void);
#endif /* CONFIG_MACH_SPEAR300 */
/* spear310 declarations */
#ifdef CONFIG_MACH_SPEAR310
-/* pad mux devices */
-extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
-extern struct pmx_dev spear310_pmx_emi_cs_2_3;
-extern struct pmx_dev spear310_pmx_uart1;
-extern struct pmx_dev spear310_pmx_uart2;
-extern struct pmx_dev spear310_pmx_uart3_4_5;
-extern struct pmx_dev spear310_pmx_fsmc;
-extern struct pmx_dev spear310_pmx_rs485_0_1;
-extern struct pmx_dev spear310_pmx_tdm0;
-
-/* Add spear310 machine declarations here */
void __init spear310_clk_init(void);
#endif /* CONFIG_MACH_SPEAR310 */
/* spear320 declarations */
#ifdef CONFIG_MACH_SPEAR320
-/* pad mux modes */
-extern struct pmx_mode spear320_auto_net_smii_mode;
-extern struct pmx_mode spear320_auto_net_mii_mode;
-extern struct pmx_mode spear320_auto_exp_mode;
-extern struct pmx_mode spear320_small_printers_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear320_pmx_clcd;
-extern struct pmx_dev spear320_pmx_emi;
-extern struct pmx_dev spear320_pmx_fsmc;
-extern struct pmx_dev spear320_pmx_spp;
-extern struct pmx_dev spear320_pmx_sdhci;
-extern struct pmx_dev spear320_pmx_i2s;
-extern struct pmx_dev spear320_pmx_uart1;
-extern struct pmx_dev spear320_pmx_uart1_modem;
-extern struct pmx_dev spear320_pmx_uart2;
-extern struct pmx_dev spear320_pmx_touchscreen;
-extern struct pmx_dev spear320_pmx_can;
-extern struct pmx_dev spear320_pmx_sdhci_led;
-extern struct pmx_dev spear320_pmx_pwm0;
-extern struct pmx_dev spear320_pmx_pwm1;
-extern struct pmx_dev spear320_pmx_pwm2;
-extern struct pmx_dev spear320_pmx_pwm3;
-extern struct pmx_dev spear320_pmx_ssp1;
-extern struct pmx_dev spear320_pmx_ssp2;
-extern struct pmx_dev spear320_pmx_mii1;
-extern struct pmx_dev spear320_pmx_smii0;
-extern struct pmx_dev spear320_pmx_smii1;
-extern struct pmx_dev spear320_pmx_i2c1;
-
-/* Add spear320 machine declarations here */
void __init spear320_clk_init(void);
#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f46fc26..2db0bd1 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -21,357 +21,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG 0x00
-#define MODE_CONFIG_REG 0x04
-
-/* modes */
-#define NAND_MODE (1 << 0)
-#define NOR_MODE (1 << 1)
-#define PHOTO_FRAME_MODE (1 << 2)
-#define LEND_IP_PHONE_MODE (1 << 3)
-#define HEND_IP_PHONE_MODE (1 << 4)
-#define LEND_WIFI_PHONE_MODE (1 << 5)
-#define HEND_WIFI_PHONE_MODE (1 << 6)
-#define ATA_PABX_WI2S_MODE (1 << 7)
-#define ATA_PABX_I2S_MODE (1 << 8)
-#define CAML_LCDW_MODE (1 << 9)
-#define CAMU_LCD_MODE (1 << 10)
-#define CAMU_WLCD_MODE (1 << 11)
-#define CAML_LCD_MODE (1 << 12)
-#define ALL_MODES 0x1FFF
-
-struct pmx_mode spear300_nand_mode = {
- .id = NAND_MODE,
- .name = "nand mode",
- .mask = 0x00,
-};
-
-struct pmx_mode spear300_nor_mode = {
- .id = NOR_MODE,
- .name = "nor mode",
- .mask = 0x01,
-};
-
-struct pmx_mode spear300_photo_frame_mode = {
- .id = PHOTO_FRAME_MODE,
- .name = "photo frame mode",
- .mask = 0x02,
-};
-
-struct pmx_mode spear300_lend_ip_phone_mode = {
- .id = LEND_IP_PHONE_MODE,
- .name = "lend ip phone mode",
- .mask = 0x03,
-};
-
-struct pmx_mode spear300_hend_ip_phone_mode = {
- .id = HEND_IP_PHONE_MODE,
- .name = "hend ip phone mode",
- .mask = 0x04,
-};
-
-struct pmx_mode spear300_lend_wifi_phone_mode = {
- .id = LEND_WIFI_PHONE_MODE,
- .name = "lend wifi phone mode",
- .mask = 0x05,
-};
-
-struct pmx_mode spear300_hend_wifi_phone_mode = {
- .id = HEND_WIFI_PHONE_MODE,
- .name = "hend wifi phone mode",
- .mask = 0x06,
-};
-
-struct pmx_mode spear300_ata_pabx_wi2s_mode = {
- .id = ATA_PABX_WI2S_MODE,
- .name = "ata pabx wi2s mode",
- .mask = 0x07,
-};
-
-struct pmx_mode spear300_ata_pabx_i2s_mode = {
- .id = ATA_PABX_I2S_MODE,
- .name = "ata pabx i2s mode",
- .mask = 0x08,
-};
-
-struct pmx_mode spear300_caml_lcdw_mode = {
- .id = CAML_LCDW_MODE,
- .name = "caml lcdw mode",
- .mask = 0x0C,
-};
-
-struct pmx_mode spear300_camu_lcd_mode = {
- .id = CAMU_LCD_MODE,
- .name = "camu lcd mode",
- .mask = 0x0D,
-};
-
-struct pmx_mode spear300_camu_wlcd_mode = {
- .id = CAMU_WLCD_MODE,
- .name = "camu wlcd mode",
- .mask = 0x0E,
-};
-
-struct pmx_mode spear300_caml_lcd_mode = {
- .id = CAML_LCD_MODE,
- .name = "caml lcd mode",
- .mask = 0x0F,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
- {
- .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
- ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_fsmc_2_chips = {
- .name = "fsmc_2_chips",
- .modes = pmx_fsmc_2_chips_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
- {
- .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
- ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
- .mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_fsmc_4_chips = {
- .name = "fsmc_4_chips",
- .modes = pmx_fsmc_4_chips_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_keyboard_modes[] = {
- {
- .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
- LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
- CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
- CAML_LCD_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear300_pmx_keyboard = {
- .name = "keyboard",
- .modes = pmx_keyboard_modes,
- .mode_count = ARRAY_SIZE(pmx_keyboard_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_clcd_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
- }, {
- .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
- CAMU_LCD_MODE | CAML_LCD_MODE,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_clcd = {
- .name = "clcd",
- .modes = pmx_clcd_modes,
- .mode_count = ARRAY_SIZE(pmx_clcd_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
- .mask = PMX_MII_MASK,
- }, {
- .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- }, {
- .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
- }, {
- .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
- }, {
- .ids = ATA_PABX_WI2S_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
- | PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_gpio = {
- .name = "telecom_gpio",
- .modes = pmx_telecom_gpio_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
- HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
- | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
- | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
- | CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_tdm = {
- .name = "telecom_tdm",
- .modes = pmx_telecom_tdm_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
- {
- .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
- LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
- | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
- CAML_LCDW_MODE | CAML_LCD_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = {
- .name = "telecom_spi_cs_i2c_clk",
- .modes = pmx_telecom_spi_cs_i2c_clk_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_camera_modes[] = {
- {
- .ids = CAML_LCDW_MODE | CAML_LCD_MODE,
- .mask = PMX_MII_MASK,
- }, {
- .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_camera = {
- .name = "telecom_camera",
- .modes = pmx_telecom_camera_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_dac_modes[] = {
- {
- .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
- | CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_dac = {
- .name = "telecom_dac",
- .modes = pmx_telecom_dac_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
- {
- .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
- | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
- ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
- | CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_i2s = {
- .name = "telecom_i2s",
- .modes = pmx_telecom_i2s_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
- {
- .ids = NAND_MODE | NOR_MODE,
- .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
- PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_boot_pins = {
- .name = "telecom_boot_pins",
- .modes = pmx_telecom_boot_pins_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
- HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
- HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
- CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
- ATA_PABX_I2S_MODE,
- .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
- PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
- PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_4bit = {
- .name = "telecom_sdhci_4bit",
- .modes = pmx_telecom_sdhci_4bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
- HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
- HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
- CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
- PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
- PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_8bit = {
- .name = "telecom_sdhci_8bit",
- .modes = pmx_telecom_sdhci_8bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_gpio1_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE,
- .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
- PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_gpio1 = {
- .name = "arm gpio1",
- .modes = pmx_gpio1_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio1_modes),
- .enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
- .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
- .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -425,22 +74,6 @@ static struct spear_shirq shirq_ras1 = {
},
};
-/* padmux devices to enable */
-static struct pmx_dev *spear300_evb_pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp_cs,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear300 specific devices */
- &spear300_pmx_fsmc_2_chips,
- &spear300_pmx_clcd,
- &spear300_pmx_telecom_sdhci_4bit,
- &spear300_pmx_gpio1,
-};
-
/* DMAC platform data's slave info */
struct pl08x_channel_data spear300_dma_info[] = {
{
@@ -639,7 +272,7 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
static void __init spear300_dt_init(void)
{
- int ret = -EINVAL;
+ int ret;
pl080_plat_data.slave_channels = spear300_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
@@ -654,26 +287,6 @@ static void __init spear300_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ\n");
}
-
- if (of_machine_is_compatible("st,spear300-evb")) {
- /* pmx initialization */
- pmx_driver.mode = &spear300_photo_frame_mode;
- pmx_driver.devs = spear300_evb_pmx_devs;
- pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
-
- pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
- if (pmx_driver.base) {
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- /* Free Mapping, device selection already done */
- iounmap(pmx_driver.base);
- }
-
- if (ret)
- pr_err("Initialization Failed");
- }
}
static const char * const spear300_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 063e7da..aec07c9 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -22,128 +22,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG 0x08
-
-/* devices */
-static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
- .name = "emi_cs_0_1_4_5",
- .modes = pmx_emi_cs_0_1_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_emi_cs_2_3 = {
- .name = "emi_cs_2_3",
- .modes = pmx_emi_cs_2_3_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart1 = {
- .name = "uart1",
- .modes = pmx_uart1_modes,
- .mode_count = ARRAY_SIZE(pmx_uart1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart2 = {
- .name = "uart2",
- .modes = pmx_uart2_modes,
- .mode_count = ARRAY_SIZE(pmx_uart2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart3_4_5 = {
- .name = "uart3_4_5",
- .modes = pmx_uart3_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_fsmc = {
- .name = "fsmc",
- .modes = pmx_fsmc_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_rs485_0_1 = {
- .name = "rs485_0_1",
- .modes = pmx_rs485_0_1_modes,
- .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_tdm0_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_tdm0 = {
- .name = "tdm0",
- .modes = pmx_tdm0_modes,
- .mode_count = ARRAY_SIZE(pmx_tdm0_modes),
- .enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
- .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -260,30 +138,6 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
-/* padmux devices to enable */
-static struct pmx_dev *spear310_evb_pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_gpio_pin0,
- &spear3xx_pmx_gpio_pin1,
- &spear3xx_pmx_gpio_pin2,
- &spear3xx_pmx_gpio_pin3,
- &spear3xx_pmx_gpio_pin4,
- &spear3xx_pmx_gpio_pin5,
- &spear3xx_pmx_uart0,
-
- /* spear310 specific devices */
- &spear310_pmx_emi_cs_0_1_4_5,
- &spear310_pmx_emi_cs_2_3,
- &spear310_pmx_uart1,
- &spear310_pmx_uart2,
- &spear310_pmx_uart3_4_5,
- &spear310_pmx_fsmc,
- &spear310_pmx_rs485_0_1,
- &spear310_pmx_tdm0,
-};
-
/* DMAC platform data's slave info */
struct pl08x_channel_data spear310_dma_info[] = {
{
@@ -518,7 +372,7 @@ static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
static void __init spear310_dt_init(void)
{
void __iomem *base;
- int ret = 0;
+ int ret;
pl080_plat_data.slave_channels = spear310_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
@@ -553,19 +407,6 @@ static void __init spear310_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
-
- if (of_machine_is_compatible("st,spear310-evb")) {
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = NULL;
- pmx_driver.devs = spear310_evb_pmx_devs;
- pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
-
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- }
}
static const char * const spear310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 1e74031..4812c69 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -23,373 +23,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG 0x0C
-#define MODE_CONFIG_REG 0x10
-
-/* modes */
-#define AUTO_NET_SMII_MODE (1 << 0)
-#define AUTO_NET_MII_MODE (1 << 1)
-#define AUTO_EXP_MODE (1 << 2)
-#define SMALL_PRINTERS_MODE (1 << 3)
-#define ALL_MODES 0xF
-
-struct pmx_mode spear320_auto_net_smii_mode = {
- .id = AUTO_NET_SMII_MODE,
- .name = "Automation Networking SMII Mode",
- .mask = 0x00,
-};
-
-struct pmx_mode spear320_auto_net_mii_mode = {
- .id = AUTO_NET_MII_MODE,
- .name = "Automation Networking MII Mode",
- .mask = 0x01,
-};
-
-struct pmx_mode spear320_auto_exp_mode = {
- .id = AUTO_EXP_MODE,
- .name = "Automation Expanded Mode",
- .mask = 0x02,
-};
-
-struct pmx_mode spear320_small_printers_mode = {
- .id = SMALL_PRINTERS_MODE,
- .name = "Small Printers Mode",
- .mask = 0x03,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_clcd_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_clcd = {
- .name = "clcd",
- .modes = pmx_clcd_modes,
- .mode_count = ARRAY_SIZE(pmx_clcd_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_modes[] = {
- {
- .ids = AUTO_EXP_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_emi = {
- .name = "emi",
- .modes = pmx_emi_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
- {
- .ids = ALL_MODES,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_fsmc = {
- .name = "fsmc",
- .modes = pmx_fsmc_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_spp_modes[] = {
- {
- .ids = SMALL_PRINTERS_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_spp = {
- .name = "spp",
- .modes = pmx_spp_modes,
- .mode_count = ARRAY_SIZE(pmx_spp_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
- SMALL_PRINTERS_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_sdhci = {
- .name = "sdhci",
- .modes = pmx_sdhci_modes,
- .mode_count = ARRAY_SIZE(pmx_sdhci_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2s_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_i2s = {
- .name = "i2s",
- .modes = pmx_i2s_modes,
- .mode_count = ARRAY_SIZE(pmx_i2s_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
- {
- .ids = ALL_MODES,
- .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_uart1 = {
- .name = "uart1",
- .modes = pmx_uart1_modes,
- .mode_count = ARRAY_SIZE(pmx_uart1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modem_modes[] = {
- {
- .ids = AUTO_EXP_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
- PMX_SSP_CS_MASK,
- }, {
- .ids = SMALL_PRINTERS_MODE,
- .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
- PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_uart1_modem = {
- .name = "uart1_modem",
- .modes = pmx_uart1_modem_modes,
- .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
- {
- .ids = ALL_MODES,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_uart2 = {
- .name = "uart2",
- .modes = pmx_uart2_modes,
- .mode_count = ARRAY_SIZE(pmx_uart2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_touchscreen_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_touchscreen = {
- .name = "touchscreen",
- .modes = pmx_touchscreen_modes,
- .mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_can_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
- .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
- PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_can = {
- .name = "can",
- .modes = pmx_can_modes,
- .mode_count = ARRAY_SIZE(pmx_can_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_led_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_sdhci_led = {
- .name = "sdhci_led",
- .modes = pmx_sdhci_led_modes,
- .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm0_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- }, {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm0 = {
- .name = "pwm0",
- .modes = pmx_pwm0_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm0_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm1_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- }, {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm1 = {
- .name = "pwm1",
- .modes = pmx_pwm1_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm2_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_SSP_CS_MASK,
- }, {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm2 = {
- .name = "pwm2",
- .modes = pmx_pwm2_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm3_modes[] = {
- {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm3 = {
- .name = "pwm3",
- .modes = pmx_pwm3_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm3_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp1_modes[] = {
- {
- .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_ssp1 = {
- .name = "ssp1",
- .modes = pmx_ssp1_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp2_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_ssp2 = {
- .name = "ssp2",
- .modes = pmx_ssp2_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_mii1_modes[] = {
- {
- .ids = AUTO_NET_MII_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_mii1 = {
- .name = "mii1",
- .modes = pmx_mii1_modes,
- .mode_count = ARRAY_SIZE(pmx_mii1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii0_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_smii0 = {
- .name = "smii0",
- .modes = pmx_smii0_modes,
- .mode_count = ARRAY_SIZE(pmx_smii0_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii1_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_smii1 = {
- .name = "smii1",
- .modes = pmx_smii1_modes,
- .mode_count = ARRAY_SIZE(pmx_smii1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2c1_modes[] = {
- {
- .ids = AUTO_EXP_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_i2c1 = {
- .name = "i2c1",
- .modes = pmx_i2c1_modes,
- .mode_count = ARRAY_SIZE(pmx_i2c1_modes),
- .enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
- .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
- .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -514,27 +147,6 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
-/* padmux devices to enable */
-static struct pmx_dev *spear320_evb_pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear320 specific devices */
- &spear320_pmx_fsmc,
- &spear320_pmx_sdhci,
- &spear320_pmx_i2s,
- &spear320_pmx_uart1,
- &spear320_pmx_uart2,
- &spear320_pmx_can,
- &spear320_pmx_pwm0,
- &spear320_pmx_pwm1,
- &spear320_pmx_pwm2,
- &spear320_pmx_mii1,
-};
-
/* DMAC platform data's slave info */
struct pl08x_channel_data spear320_dma_info[] = {
{
@@ -772,7 +384,7 @@ static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
static void __init spear320_dt_init(void)
{
void __iomem *base;
- int ret = 0;
+ int ret;
pl080_plat_data.slave_channels = spear320_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
@@ -801,19 +413,6 @@ static void __init spear320_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
-
- if (of_machine_is_compatible("st,spear320-evb")) {
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = &spear320_auto_net_mii_mode;
- pmx_driver.devs = spear320_evb_pmx_devs;
- pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
-
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- }
}
static const char * const spear320_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 17d4ac9..12bf879 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -23,431 +23,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* devices */
-static struct pmx_dev_mode pmx_firda_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_firda = {
- .name = "firda",
- .modes = pmx_firda_modes,
- .mode_count = ARRAY_SIZE(pmx_firda_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_i2c_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_I2C_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_i2c = {
- .name = "i2c",
- .modes = pmx_i2c_modes,
- .mode_count = ARRAY_SIZE(pmx_i2c_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_cs_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_ssp_cs = {
- .name = "ssp_chip_selects",
- .modes = pmx_ssp_cs_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_SSP_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_ssp = {
- .name = "ssp",
- .modes = pmx_ssp_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_mii_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_mii = {
- .name = "mii",
- .modes = pmx_mii_modes,
- .mode_count = ARRAY_SIZE(pmx_mii_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin0 = {
- .name = "gpio_pin0",
- .modes = pmx_gpio_pin0_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN1_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin1 = {
- .name = "gpio_pin1",
- .modes = pmx_gpio_pin1_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin2 = {
- .name = "gpio_pin2",
- .modes = pmx_gpio_pin2_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN3_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin3 = {
- .name = "gpio_pin3",
- .modes = pmx_gpio_pin3_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin4 = {
- .name = "gpio_pin4",
- .modes = pmx_gpio_pin4_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin5 = {
- .name = "gpio_pin5",
- .modes = pmx_gpio_pin5_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modem_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_uart0_modem = {
- .name = "uart0_modem",
- .modes = pmx_uart0_modem_modes,
- .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_UART0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_uart0 = {
- .name = "uart0",
- .modes = pmx_uart0_modes,
- .mode_count = ARRAY_SIZE(pmx_uart0_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_3_4_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_timer_3_4 = {
- .name = "timer_3_4",
- .modes = pmx_timer_3_4_modes,
- .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_1_2_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_timer_1_2 = {
- .name = "timer_1_2",
- .modes = pmx_timer_1_2_modes,
- .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
- .enb_on_reset = 0,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* plgpios devices */
-static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_0_1 = {
- .name = "plgpio 0 and 1",
- .modes = pmx_plgpio_0_1_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_UART0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_2_3 = {
- .name = "plgpio 2 and 3",
- .modes = pmx_plgpio_2_3_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_I2C_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_4_5 = {
- .name = "plgpio 4 and 5",
- .modes = pmx_plgpio_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_SSP_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_6_9 = {
- .name = "plgpio 6 to 9",
- .modes = pmx_plgpio_6_9_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_10_27 = {
- .name = "plgpio 10 to 27",
- .modes = pmx_plgpio_10_27_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_28_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_28 = {
- .name = "plgpio 28",
- .modes = pmx_plgpio_28_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_29_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN1_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_29 = {
- .name = "plgpio 29",
- .modes = pmx_plgpio_29_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_30_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_30 = {
- .name = "plgpio 30",
- .modes = pmx_plgpio_30_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_31_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN3_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_31 = {
- .name = "plgpio 31",
- .modes = pmx_plgpio_31_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_32_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_32 = {
- .name = "plgpio 32",
- .modes = pmx_plgpio_32_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_33_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_33 = {
- .name = "plgpio 33",
- .modes = pmx_plgpio_33_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_34_36 = {
- .name = "plgpio 34 to 36",
- .modes = pmx_plgpio_34_36_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_37_42 = {
- .name = "plgpio 37 to 42",
- .modes = pmx_plgpio_37_42_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = {
- .name = "plgpio 43, 44, 47 and 48",
- .modes = pmx_plgpio_43_44_47_48_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
- .name = "plgpio 45, 46, 49 and 50",
- .modes = pmx_plgpio_45_46_49_50_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
- .enb_on_reset = 1,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
/* ssp device registration */
struct pl022_ssp_controller pl022_plat_data = {
.bus_id = 0,
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index 4af6258..7744802 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -5,4 +5,4 @@
# Common support
obj-y := clock.o restart.o time.o pl080.o
-obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h
deleted file mode 100644
index 877f3ad..0000000
--- a/arch/arm/plat-spear/include/plat/padmux.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.h
- *
- * SPEAr platform specific gpio pads muxing file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_PADMUX_H
-#define __PLAT_PADMUX_H
-
-#include <linux/types.h>
-
-/*
- * struct pmx_reg: configuration structure for mode reg and mux reg
- *
- * offset: offset of mode reg
- * mask: mask of mode reg
- */
-struct pmx_reg {
- u32 offset;
- u32 mask;
-};
-
-/*
- * struct pmx_dev_mode: configuration structure every group of modes of a device
- *
- * ids: all modes for this configuration
- * mask: mask for supported mode
- */
-struct pmx_dev_mode {
- u32 ids;
- u32 mask;
-};
-
-/*
- * struct pmx_mode: mode definition structure
- *
- * name: mode name
- * mask: mode mask
- */
-struct pmx_mode {
- char *name;
- u32 id;
- u32 mask;
-};
-
-/*
- * struct pmx_dev: device definition structure
- *
- * name: device name
- * modes: device configuration array for different modes supported
- * mode_count: size of modes array
- * is_active: is peripheral active/enabled
- * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
- */
-struct pmx_dev {
- char *name;
- struct pmx_dev_mode *modes;
- u8 mode_count;
- bool is_active;
- bool enb_on_reset;
-};
-
-/*
- * struct pmx_driver: driver definition structure
- *
- * mode: mode to be set
- * devs: array of pointer to pmx devices
- * devs_count: ARRAY_SIZE of devs
- * base: base address of soc config registers
- * mode_reg: structure of mode config register
- * mux_reg: structure of device mux config register
- */
-struct pmx_driver {
- struct pmx_mode *mode;
- struct pmx_dev **devs;
- u8 devs_count;
- u32 *base;
- struct pmx_reg mode_reg;
- struct pmx_reg mux_reg;
-};
-
-/* pmx functions */
-int pmx_register(struct pmx_driver *driver);
-
-#endif /* __PLAT_PADMUX_H */
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
deleted file mode 100644
index 555eec6..0000000
--- a/arch/arm/plat-spear/padmux.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.c
- *
- * SPEAr platform specific gpio pads muxing source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <plat/padmux.h>
-
-/*
- * struct pmx: pmx definition structure
- *
- * base: base address of configuration registers
- * mode_reg: mode configurations
- * mux_reg: muxing configurations
- * active_mode: pointer to current active mode
- */
-struct pmx {
- u32 base;
- struct pmx_reg mode_reg;
- struct pmx_reg mux_reg;
- struct pmx_mode *active_mode;
-};
-
-static struct pmx *pmx;
-
-/**
- * pmx_mode_set - Enables an multiplexing mode
- * @mode - pointer to pmx mode
- *
- * It will set mode of operation in hardware.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_mode_set(struct pmx_mode *mode)
-{
- u32 val;
-
- if (!mode->name)
- return -EFAULT;
-
- pmx->active_mode = mode;
-
- val = readl(pmx->base + pmx->mode_reg.offset);
- val &= ~pmx->mode_reg.mask;
- val |= mode->mask & pmx->mode_reg.mask;
- writel(val, pmx->base + pmx->mode_reg.offset);
-
- return 0;
-}
-
-/**
- * pmx_devs_enable - Enables list of devices
- * @devs - pointer to pmx device array
- * @count - number of devices to enable
- *
- * It will enable pads for all required peripherals once and only once.
- * If peripheral is not supported by current mode then request is rejected.
- * Conflicts between peripherals are not handled and peripherals will be
- * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enabled will be present.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
-{
- u32 val, i, mask;
-
- if (!count)
- return -EINVAL;
-
- val = readl(pmx->base + pmx->mux_reg.offset);
- for (i = 0; i < count; i++) {
- u8 j = 0;
-
- if (!devs[i]->name || !devs[i]->modes) {
- printk(KERN_ERR "padmux: dev name or modes is null\n");
- continue;
- }
- /* check if peripheral exists in active mode */
- if (pmx->active_mode) {
- bool found = false;
- for (j = 0; j < devs[i]->mode_count; j++) {
- if (devs[i]->modes[j].ids &
- pmx->active_mode->id) {
- found = true;
- break;
- }
- }
- if (found == false) {
- printk(KERN_ERR "%s device not available in %s"\
- "mode\n", devs[i]->name,
- pmx->active_mode->name);
- continue;
- }
- }
-
- /* enable peripheral */
- mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
- if (devs[i]->enb_on_reset)
- val &= ~mask;
- else
- val |= mask;
-
- devs[i]->is_active = true;
- }
- writel(val, pmx->base + pmx->mux_reg.offset);
- kfree(pmx);
-
- /* this will ensure that multiplexing can't be changed now */
- pmx = (struct pmx *)-1;
-
- return 0;
-}
-
-/**
- * pmx_register - registers a platform requesting pad mux feature
- * @driver - pointer to driver structure containing driver specific parameters
- *
- * Also this must be called only once. This will allocate memory for pmx
- * structure, will call pmx_mode_set, will call pmx_devs_enable.
- * Returns -ve on Err otherwise 0
- */
-int pmx_register(struct pmx_driver *driver)
-{
- int ret = 0;
-
- if (pmx)
- return -EPERM;
- if (!driver->base || !driver->devs)
- return -EFAULT;
-
- pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
- if (!pmx)
- return -ENOMEM;
-
- pmx->base = (u32)driver->base;
- pmx->mode_reg.offset = driver->mode_reg.offset;
- pmx->mode_reg.mask = driver->mode_reg.mask;
- pmx->mux_reg.offset = driver->mux_reg.offset;
- pmx->mux_reg.mask = driver->mux_reg.mask;
-
- /* choose mode to enable */
- if (driver->mode) {
- ret = pmx_mode_set(driver->mode);
- if (ret)
- goto pmx_fail;
- }
- ret = pmx_devs_enable(driver->devs, driver->devs_count);
- if (ret)
- goto pmx_fail;
-
- return 0;
-
-pmx_fail:
- return ret;
-}
--
1.7.9
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 2/4] pinctrl: Add SPEAr pinctrl drivers
2012-04-04 11:35 [PATCH V2 0/4] pinctrl: Add SPEAr pinctrl support Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 1/4] SPEAr: Remove existing padmux support for SPEAr Viresh Kumar
@ 2012-04-04 11:35 ` Viresh Kumar
2012-04-04 22:11 ` Stephen Warren
2012-04-04 11:35 ` [PATCH V2 4/4] SPEAr3xx: Add pinctrl support for boards Viresh Kumar
[not found] ` <2a78bbfab59b531adef0820f34f683dd736d3a3a.1333538870.git.viresh.kumar@st.com>
3 siblings, 1 reply; 10+ messages in thread
From: Viresh Kumar @ 2012-04-04 11:35 UTC (permalink / raw)
To: linux-arm-kernel
This adds pinctrl driver for SPEAr platform. It also updates MAINTAINERS file
for SPEAr pinctrl drivers.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
MAINTAINERS | 23 +--
drivers/pinctrl/Kconfig | 2 +
drivers/pinctrl/Makefile | 2 +
drivers/pinctrl/spear/Kconfig | 14 ++
drivers/pinctrl/spear/Makefile | 3 +
drivers/pinctrl/spear/pinctrl-spear.c | 301 +++++++++++++++++++++++++++++++++
drivers/pinctrl/spear/pinctrl-spear.h | 142 ++++++++++++++++
7 files changed, 472 insertions(+), 15 deletions(-)
create mode 100644 drivers/pinctrl/spear/Kconfig
create mode 100644 drivers/pinctrl/spear/Makefile
create mode 100644 drivers/pinctrl/spear/pinctrl-spear.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear.h
diff --git a/MAINTAINERS b/MAINTAINERS
index e247af8..78782ea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5238,6 +5238,14 @@ M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: drivers/pinctrl/
+PIN CONTROLLER - ST SPEAR
+M: Viresh Kumar <viresh.kumar@st.com>
+L: spear-devel at list.st.com
+L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+W: http://www.st.com/spear
+S: Maintained
+F: driver/pinctrl/spear/
+
PKTCDVD DRIVER
M: Peter Osterlund <petero2@telia.com>
S: Maintained
@@ -6331,21 +6339,6 @@ F: arch/arm/mach-spear*/clock.c
F: arch/arm/plat-spear/clock.c
F: arch/arm/plat-spear/include/plat/clock.h
-SPEAR PAD MULTIPLEXING SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
-L: spear-devel at list.st.com
-L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W: http://www.st.com/spear
-S: Maintained
-F: arch/arm/plat-spear/include/plat/padmux.h
-F: arch/arm/plat-spear/padmux.c
-F: arch/arm/mach-spear*/spear*xx.c
-F: arch/arm/mach-spear*/include/mach/generic.h
-F: arch/arm/mach-spear3xx/spear3*0.c
-F: arch/arm/mach-spear3xx/spear3*0_evb.c
-F: arch/arm/mach-spear6xx/spear600.c
-F: arch/arm/mach-spear6xx/spear600_evb.c
-
SPI SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general at lists.sourceforge.net
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index abfb964..b25ac41 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -84,6 +84,8 @@ config PINCTRL_COH901
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
ports of 8 GPIO pins each.
+source "drivers/pinctrl/spear/Kconfig"
+
endmenu
endif
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 6d4150b..2febd76 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -16,3 +16,5 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
+
+obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/pinctrl/spear/Kconfig b/drivers/pinctrl/spear/Kconfig
new file mode 100644
index 0000000..47a0e295
--- /dev/null
+++ b/drivers/pinctrl/spear/Kconfig
@@ -0,0 +1,14 @@
+#
+# ST Microelectronics SPEAr PINCTRL drivers
+#
+
+if PLAT_SPEAR
+
+config PINCTRL_SPEAR
+ bool
+ depends on OF
+ select PINMUX
+ help
+ This enables pin control drivers for SPEAr Platform
+
+endif
diff --git a/drivers/pinctrl/spear/Makefile b/drivers/pinctrl/spear/Makefile
new file mode 100644
index 0000000..69c1a51
--- /dev/null
+++ b/drivers/pinctrl/spear/Makefile
@@ -0,0 +1,3 @@
+# SPEAr pinmux support
+
+obj-$(CONFIG_PINCTRL_SPEAR) += pinctrl-spear.o
diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
new file mode 100644
index 0000000..38eec3d
--- /dev/null
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -0,0 +1,301 @@
+/*
+ * Driver for the ST Microelectronics SPEAr pinmux
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * Inspired from:
+ * - U300 Pinctl drivers
+ * - Tegra Pinctl drivers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-spear.h"
+
+#define DRIVER_NAME "spear-pinmux"
+
+static inline u32 pmx_readl(struct spear_pmx *pmx, u32 reg)
+{
+ return readl_relaxed(pmx->vbase + reg);
+}
+
+static inline void pmx_writel(struct spear_pmx *pmx, u32 val, u32 reg)
+{
+ writel_relaxed(val, pmx->vbase + reg);
+}
+
+static int set_mode(struct spear_pmx *pmx, int mode)
+{
+ struct spear_pmx_mode *pmx_mode = NULL;
+ int i;
+ u32 val;
+
+ if (!pmx->machdata->pmx_modes || !pmx->machdata->npmx_modes)
+ return -EINVAL;
+
+ for (i = 0; i < pmx->machdata->npmx_modes; i++) {
+ if (pmx->machdata->pmx_modes[i]->mode == (1 << mode)) {
+ pmx_mode = pmx->machdata->pmx_modes[i];
+ break;
+ }
+ }
+
+ if (!pmx_mode)
+ return -EINVAL;
+
+ val = pmx_readl(pmx, pmx_mode->reg);
+ val &= ~pmx_mode->mask;
+ val |= pmx_mode->val;
+ pmx_writel(pmx, val, pmx_mode->reg);
+
+ pmx->machdata->mode = pmx_mode->mode;
+ dev_info(pmx->dev, "Configured Mode: %s with id: %x\n\n",
+ pmx_mode->name ? pmx_mode->name : "no_name",
+ pmx_mode->reg);
+
+ return 0;
+}
+
+void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg)
+{
+ struct spear_pingroup *pgroup;
+ struct spear_modemux *modemux;
+ int i, j, group;
+
+ for (group = 0; group < machdata->ngroups; group++) {
+ pgroup = machdata->groups[group];
+
+ for (i = 0; i < pgroup->nmodemuxs; i++) {
+ modemux = &pgroup->modemuxs[i];
+
+ for (j = 0; j < modemux->nmuxregs; j++)
+ if (modemux->muxregs[j].reg == 0xFFFF)
+ modemux->muxregs[j].reg = reg;
+ }
+ }
+}
+
+static int spear_pinctrl_get_groups_cnt(struct pinctrl_dev *pctldev)
+{
+ struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->machdata->ngroups;
+}
+
+static const char *spear_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->machdata->groups[group]->name;
+}
+
+static int spear_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group, const unsigned **pins, unsigned *num_pins)
+{
+ struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = pmx->machdata->groups[group]->pins;
+ *num_pins = pmx->machdata->groups[group]->npins;
+
+ return 0;
+}
+
+static void spear_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned offset)
+{
+ seq_printf(s, " " DRIVER_NAME);
+}
+
+static struct pinctrl_ops spear_pinctrl_ops = {
+ .get_groups_count = spear_pinctrl_get_groups_cnt,
+ .get_group_name = spear_pinctrl_get_group_name,
+ .get_group_pins = spear_pinctrl_get_group_pins,
+ .pin_dbg_show = spear_pinctrl_pin_dbg_show,
+};
+
+static int spear_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+ struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->machdata->nfunctions;
+}
+
+static const char *spear_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ return pmx->machdata->functions[function]->name;
+}
+
+static int spear_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
+ unsigned function, const char *const **groups,
+ unsigned * const ngroups)
+{
+ struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pmx->machdata->functions[function]->groups;
+ *ngroups = pmx->machdata->functions[function]->ngroups;
+
+ return 0;
+}
+
+static int spear_pinctrl_endisable(struct pinctrl_dev *pctldev,
+ unsigned function, unsigned group, bool enable)
+{
+ struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+ const struct spear_pingroup *pgroup;
+ const struct spear_modemux *modemux;
+ struct spear_muxreg *muxreg;
+ u32 val, temp;
+ int i, j;
+ bool found = false;
+
+ pgroup = pmx->machdata->groups[group];
+
+ for (i = 0; i < pgroup->nmodemuxs; i++) {
+ modemux = &pgroup->modemuxs[i];
+
+ /* SoC have any modes */
+ if (pmx->machdata->modes_supported) {
+ if (!(pmx->machdata->mode & modemux->modes))
+ continue;
+ }
+
+ found = true;
+ for (j = 0; j < modemux->nmuxregs; j++) {
+ muxreg = &modemux->muxregs[j];
+
+ val = pmx_readl(pmx, muxreg->reg);
+ val &= ~muxreg->mask;
+
+ if (enable)
+ temp = muxreg->val;
+ else
+ temp = ~muxreg->val;
+
+ val |= temp;
+ pmx_writel(pmx, val, muxreg->reg);
+ }
+ }
+
+ if (!found) {
+ dev_err(pmx->dev, "pinmux group: %s not supported\n",
+ pgroup->name);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int spear_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned function,
+ unsigned group)
+{
+ return spear_pinctrl_endisable(pctldev, function, group, true);
+}
+
+static void spear_pinctrl_disable(struct pinctrl_dev *pctldev,
+ unsigned function, unsigned group)
+{
+ spear_pinctrl_endisable(pctldev, function, group, false);
+}
+
+static struct pinmux_ops spear_pinmux_ops = {
+ .get_functions_count = spear_pinctrl_get_funcs_count,
+ .get_function_name = spear_pinctrl_get_func_name,
+ .get_function_groups = spear_pinctrl_get_func_groups,
+ .enable = spear_pinctrl_enable,
+ .disable = spear_pinctrl_disable,
+};
+
+static struct pinctrl_desc spear_pinctrl_desc = {
+ .name = DRIVER_NAME,
+ .pctlops = &spear_pinctrl_ops,
+ .pmxops = &spear_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+int __devinit spear_pinctrl_probe(struct platform_device *pdev,
+ struct spear_pinctrl_machdata *machdata)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res;
+ struct spear_pmx *pmx;
+
+ if (!machdata)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing MEM resource\n");
+ return -ENODEV;
+ }
+
+ pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL);
+ if (!pmx) {
+ dev_err(&pdev->dev, "Can't alloc spear_pmx\n");
+ return -ENOMEM;
+ }
+
+ pmx->dev = &pdev->dev;
+ pmx->machdata = machdata;
+
+ pmx->vbase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!pmx->vbase) {
+ dev_err(&pdev->dev, "Couldn't ioremap base %x\n", res->start);
+ return -ENODEV;
+ }
+
+ /* configure mode, if supported by SoC */
+ if (machdata->modes_supported) {
+ int mode = 0;
+
+ if (of_property_read_u32(np, "st,pinmux-mode", &mode)) {
+ dev_err(&pdev->dev, "OF: pinmux mode not passed\n");
+ return -EINVAL;
+ }
+
+ if (set_mode(pmx, mode)) {
+ dev_err(&pdev->dev, "OF: Couldn't configure mode: %x\n",
+ mode);
+ return -EINVAL;
+ }
+ }
+
+ spear_pinctrl_desc.pins = machdata->pins;
+ spear_pinctrl_desc.npins = machdata->npins;
+ pmx->pctl = pinctrl_register(&spear_pinctrl_desc, &pdev->dev, pmx);
+ if (IS_ERR(pmx->pctl)) {
+ dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
+ return PTR_ERR(pmx->pctl);
+ }
+
+ platform_set_drvdata(pdev, pmx);
+
+ dev_info(&pdev->dev, "Registered with virtual address 0x%08x, physical address 0x%08x\n",
+ (u32)pmx->vbase, res->start);
+
+ return 0;
+}
+
+int __devexit spear_pinctrl_remove(struct platform_device *pdev)
+{
+ struct spear_pmx *pmx = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ pinctrl_unregister(pmx->pctl);
+
+ return 0;
+}
diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
new file mode 100644
index 0000000..47a6b5b
--- /dev/null
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -0,0 +1,142 @@
+/*
+ * Driver header file for the ST Microelectronics SPEAr pinmux
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PINMUX_SPEAR_H__
+#define __PINMUX_SPEAR_H__
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/types.h>
+
+struct platform_device;
+struct device;
+
+/**
+ * struct spear_pmx_mode - SPEAr pmx mode
+ * @name: name of pmx mode
+ * @mode: mode id
+ * @reg: register for configuring this mode
+ * @mask: mask of this mode in reg
+ * @val: val to be configured at reg after doing (val & mask)
+ */
+struct spear_pmx_mode {
+ const char *const name;
+ u16 mode;
+ u16 reg;
+ u16 mask;
+ u32 val;
+};
+
+/**
+ * struct spear_muxreg - SPEAr mux reg configuration
+ * @reg: register offset
+ * @mask: mask bits
+ * @val: val to be written on mask bits
+ */
+struct spear_muxreg {
+ u16 reg;
+ u32 mask;
+ u32 val;
+};
+
+/**
+ * struct spear_modemux - SPEAr mode mux configuration
+ * @modes: mode ids supported by this group of muxregs
+ * @nmuxregs: number of muxreg configurations to be done for modes
+ * @muxregs: array of muxreg configurations to be done for modes
+ */
+struct spear_modemux {
+ u16 modes;
+ u8 nmuxregs;
+ struct spear_muxreg *muxregs;
+};
+
+/**
+ * struct spear_pingroup - SPEAr pin group configurations
+ * @name: name of pin group
+ * @pins: array containing pin numbers
+ * @npins: size of pins array
+ * @modemuxs: array of modemux configurations for this pin group
+ * @nmodemuxs: size of array modemuxs
+ *
+ * A representation of a group of pins in the SPEAr pin controller. Each group
+ * allows some parameter or parameters to be configured.
+ */
+struct spear_pingroup {
+ const char *name;
+ const unsigned *pins;
+ unsigned npins;
+ struct spear_modemux *modemuxs;
+ unsigned nmodemuxs;
+};
+
+/**
+ * struct spear_function - SPEAr pinctrl mux function
+ * @name: The name of the function, exported to pinctrl core.
+ * @groups: An array of pin groups that may select this function.
+ * @ngroups: The number of entries in @groups.
+ */
+struct spear_function {
+ const char *name;
+ const char *const *groups;
+ unsigned ngroups;
+};
+
+/**
+ * struct spear_pinctrl_machdata - SPEAr pin controller machine driver
+ * configuration
+ * @pins: An array describing all pins the pin controller affects.
+ * All pins which are also GPIOs must be listed first within the *array,
+ * and be numbered identically to the GPIO controller's *numbering.
+ * @npins: The numbmer of entries in @pins.
+ * @functions: An array describing all mux functions the SoC supports.
+ * @nfunctions: The numbmer of entries in @functions.
+ * @groups: An array describing all pin groups the pin SoC supports.
+ * @ngroups: The numbmer of entries in @groups.
+ *
+ * @modes_supported: Does SoC support modes
+ * @mode: mode configured from probe
+ * @pmx_modes: array of modes supported by SoC
+ * @npmx_modes: number of entries in pmx_modes.
+ */
+struct spear_pinctrl_machdata {
+ const struct pinctrl_pin_desc *pins;
+ unsigned npins;
+ struct spear_function **functions;
+ unsigned nfunctions;
+ struct spear_pingroup **groups;
+ unsigned ngroups;
+
+ bool modes_supported;
+ u16 mode;
+ struct spear_pmx_mode **pmx_modes;
+ unsigned npmx_modes;
+};
+
+/**
+ * struct spear_pmx - SPEAr pinctrl mux
+ * @dev: pointer to struct dev of platform_device registered
+ * @pctl: pointer to struct pinctrl_dev
+ * @machdata: pointer to SoC or machine specific structure
+ * @vbase: virtual base address of pinmux controller
+ */
+struct spear_pmx {
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+ struct spear_pinctrl_machdata *machdata;
+ void __iomem *vbase;
+};
+
+/* exported routines */
+void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg);
+int __devinit spear_pinctrl_probe(struct platform_device *pdev,
+ struct spear_pinctrl_machdata *machdata);
+int __devexit spear_pinctrl_remove(struct platform_device *pdev);
+#endif /* __PINMUX_SPEAR_H__ */
--
1.7.9
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 4/4] SPEAr3xx: Add pinctrl support for boards
2012-04-04 11:35 [PATCH V2 0/4] pinctrl: Add SPEAr pinctrl support Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 1/4] SPEAr: Remove existing padmux support for SPEAr Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 2/4] pinctrl: Add SPEAr pinctrl drivers Viresh Kumar
@ 2012-04-04 11:35 ` Viresh Kumar
2012-04-04 22:32 ` Stephen Warren
[not found] ` <2a78bbfab59b531adef0820f34f683dd736d3a3a.1333538870.git.viresh.kumar@st.com>
3 siblings, 1 reply; 10+ messages in thread
From: Viresh Kumar @ 2012-04-04 11:35 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
arch/arm/boot/dts/spear300-evb.dts | 4 ++++
arch/arm/boot/dts/spear300.dtsi | 5 +++++
arch/arm/boot/dts/spear310.dtsi | 5 +++++
arch/arm/boot/dts/spear320-evb.dts | 4 ++++
arch/arm/boot/dts/spear320.dtsi | 7 ++++++-
arch/arm/mach-spear3xx/Kconfig | 3 +++
arch/arm/mach-spear3xx/spear300.c | 25 +++++++++++++++++++++++++
arch/arm/mach-spear3xx/spear310.c | 30 ++++++++++++++++++++++++++++++
arch/arm/mach-spear3xx/spear320.c | 29 +++++++++++++++++++++++++++++
arch/arm/plat-spear/Kconfig | 1 +
10 files changed, 112 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index eaecc29..219cdaf 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -25,6 +25,10 @@
};
ahb {
+ pinmux at 99000000 {
+ st,pinmux-mode=<2>;
+ };
+
clcd at 60000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f9fcbf4..01c5e35 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -21,6 +21,11 @@
ranges = <0x60000000 0x60000000 0x50000000
0xd0000000 0xd0000000 0x30000000>;
+ pinmux at 99000000 {
+ compatible = "st,spear300-pinmux";
+ reg = <0x99000000 0x1000>;
+ };
+
clcd at 60000000 {
compatible = "arm,clcd-pl110", "arm,primecell";
reg = <0x60000000 0x1000>;
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index dc7fa14..e47081c 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -22,6 +22,11 @@
0xb0000000 0xb0000000 0x10000000
0xd0000000 0xd0000000 0x30000000>;
+ pinmux at b4000000 {
+ compatible = "st,spear310-pinmux";
+ reg = <0xb4000000 0x1000>;
+ };
+
fsmc: flash at 44000000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index d43de71..d675057 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -25,6 +25,10 @@
};
ahb {
+ pinmux at b3000000 {
+ st,pinmux-mode=<3>;
+ };
+
clcd at 90000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 9a0267a..5372ca3 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -18,9 +18,14 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- ranges = <0x40000000 0x40000000 0x70000000
+ ranges = <0x40000000 0x40000000 0x80000000
0xd0000000 0xd0000000 0x30000000>;
+ pinmux at b3000000 {
+ compatible = "st,spear320-pinmux";
+ reg = <0xb3000000 0x1000>;
+ };
+
clcd at 90000000 {
compatible = "arm,clcd-pl110", "arm,primecell";
reg = <0x90000000 0x1000>;
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
index d9fe11c..8bd3729 100644
--- a/arch/arm/mach-spear3xx/Kconfig
+++ b/arch/arm/mach-spear3xx/Kconfig
@@ -7,16 +7,19 @@ if ARCH_SPEAR3XX
menu "SPEAr3xx Implementations"
config MACH_SPEAR300
bool "SPEAr300 Machine support with Device Tree"
+ select PINCTRL_SPEAR300
help
Supports ST SPEAr300 machine configured via the device-tree
config MACH_SPEAR310
bool "SPEAr310 Machine support with Device Tree"
+ select PINCTRL_SPEAR310
help
Supports ST SPEAr310 machine configured via the device-tree
config MACH_SPEAR320
bool "SPEAr320 Machine support with Device Tree"
+ select PINCTRL_SPEAR320
help
Supports ST SPEAr320 machine configured via the device-tree
endmenu
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 2db0bd1..a08eccd 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -15,6 +15,7 @@
#include <linux/amba/pl08x.h>
#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <plat/shirq.h>
@@ -270,6 +271,24 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
{}
};
+static struct pinctrl_map __initdata spear300_evb_pmx_map[] = {
+ /* spear3xx per-device maps */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "i2c0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "ssp0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "mii0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "uart0"),
+
+ /* spear310 per-device maps */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "clcd_pfmode_grp",
+ "clcd"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "sdhci_4bit_grp",
+ "sdhci"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "gpio1_0_to_3_grp",
+ "gpio"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "gpio1_4_to_7_grp",
+ "gpio"),
+};
+
static void __init spear300_dt_init(void)
{
int ret;
@@ -287,6 +306,12 @@ static void __init spear300_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ\n");
}
+
+ if (of_machine_is_compatible("st,spear300-evb")) {
+ if (pinctrl_register_mappings(spear300_evb_pmx_map,
+ ARRAY_SIZE(spear300_evb_pmx_map)))
+ pr_err("Error registering pinmux map\n");
+ }
}
static const char * const spear300_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index aec07c9..848ab78 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -16,6 +16,7 @@
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <plat/shirq.h>
@@ -369,6 +370,29 @@ static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
{}
};
+static struct pinctrl_map __initdata spear310_evb_pmx_map[] = {
+ /* spear3xx per-device maps */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "gpio0_pin0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "gpio0_pin1"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "gpio0_pin2"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "gpio0_pin3"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "gpio0_pin4"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "gpio0_pin5"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "i2c0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "mii0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "ssp0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "uart0"),
+
+ /* spear310 per-device maps */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "emi"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "fsmc"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "uart1"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "uart2"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "uart3"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "uart4"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b4000000.pinmux", NULL, "uart5"),
+};
+
static void __init spear310_dt_init(void)
{
void __iomem *base;
@@ -407,6 +431,12 @@ static void __init spear310_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
+
+ if (of_machine_is_compatible("st,spear310-evb")) {
+ if (pinctrl_register_mappings(spear310_evb_pmx_map,
+ ARRAY_SIZE(spear310_evb_pmx_map)))
+ pr_err("Error registering pinmux map\n");
+ }
}
static const char * const spear310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 4812c69..67a8a8a 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -17,6 +17,7 @@
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <plat/shirq.h>
@@ -381,6 +382,28 @@ static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
{}
};
+static struct pinctrl_map __initdata spear320_evb_pmx_map[] = {
+ /* spear3xx per-device maps */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "i2c0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "mii0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "ssp0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "uart0"),
+
+ /* spear320 per-device maps */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", "sdhci_cd_51_grp",
+ "sdhci"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "i2s"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "uart1"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "uart2"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "can0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "can1"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", NULL, "mii2"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", "pwm0_1_pin_14_15_grp",
+ "pwm0_1"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("b3000000.pinmux", "pwm2_pin_13_grp",
+ "pwm2"),
+};
+
static void __init spear320_dt_init(void)
{
void __iomem *base;
@@ -413,6 +436,12 @@ static void __init spear320_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
+
+ if (of_machine_is_compatible("st,spear320-evb")) {
+ if (pinctrl_register_mappings(spear320_evb_pmx_map,
+ ARRAY_SIZE(spear320_evb_pmx_map)))
+ pr_err("Error registering pinmux map\n");
+ }
}
static const char * const spear320_dt_board_compat[] = {
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 6c066fc..387655b 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -13,6 +13,7 @@ config ARCH_SPEAR3XX
select ARM_VIC
select CPU_ARM926T
select USE_OF
+ select PINCTRL
help
Supports for ARM's SPEAR3XX family
--
1.7.9
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 2/4] pinctrl: Add SPEAr pinctrl drivers
2012-04-04 11:35 ` [PATCH V2 2/4] pinctrl: Add SPEAr pinctrl drivers Viresh Kumar
@ 2012-04-04 22:11 ` Stephen Warren
2012-04-05 4:56 ` Viresh Kumar
0 siblings, 1 reply; 10+ messages in thread
From: Stephen Warren @ 2012-04-04 22:11 UTC (permalink / raw)
To: linux-arm-kernel
On 04/04/2012 05:35 AM, Viresh Kumar wrote:
> This adds pinctrl driver for SPEAr platform. It also updates MAINTAINERS file
> for SPEAr pinctrl drivers.
> +int __devinit spear_pinctrl_probe(struct platform_device *pdev,
> + struct spear_pinctrl_machdata *machdata)
> +{
...
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
...
> + pmx->vbase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
If this driver is DT-only, you can replace those two calls with of_iomap().
> + platform_set_drvdata(pdev, pmx);
This should probably before the pinctrl_register() call, just in case
pinctrl_register() starts calling the pinctrl driver ops immediately,
and the drvdata is needed by the callbacks.
(Yes, I should fix up the Tegra driver for both of those)
> + dev_info(&pdev->dev, "Registered with virtual address 0x%08x, physical address 0x%08x\n",
> + (u32)pmx->vbase, res->start);
Is that useful?
> +int __devexit spear_pinctrl_remove(struct platform_device *pdev)
> +{
> + struct spear_pmx *pmx = platform_get_drvdata(pdev);
> +
> + platform_set_drvdata(pdev, NULL);
You don't need to do that; nothing should be touching the drvdata once
the driver has been removed, so the value doesn't matter.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2 3/4] pinctrl: Add SPEAr3xx pinctrl drivers
[not found] ` <2a78bbfab59b531adef0820f34f683dd736d3a3a.1333538870.git.viresh.kumar@st.com>
@ 2012-04-04 22:26 ` Stephen Warren
2012-04-05 5:05 ` Viresh Kumar
0 siblings, 1 reply; 10+ messages in thread
From: Stephen Warren @ 2012-04-04 22:26 UTC (permalink / raw)
To: linux-arm-kernel
On 04/04/2012 05:35 AM, Viresh Kumar wrote:
> This adds pinctrl driver for SPEAr3xx family. SPEAr3xx family supports three
> families: SPEAr300, SPEAr310 and SPEAr320.
> +++ b/Documentation/devicetree/bindings/pinmux/pinmux_spear.txt
> +- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320
> + - Its values for SPEAr300:
> + - NAND_MODE : <0>
> + - NOR_MODE : <1>
> + - PHOTO_FRAME_MODE : <2>
> + - LEND_IP_PHONE_MODE : <3>
> + - HEND_IP_PHONE_MODE : <4>
> + - LEND_WIFI_PHONE_MODE : <5>
> + - HEND_WIFI_PHONE_MODE : <6>
> + - ATA_PABX_WI2S_MODE : <7>
> + - ATA_PABX_I2S_MODE : <8>
> + - CAML_LCDW_MODE : <9>
> + - CAMU_LCD_MODE : <10>
> + - CAMU_WLCD_MODE : <11>
> + - CAML_LCD_MODE : <12>
> + - Its values for SPEAr320:
> + - AUTO_NET_SMII_MODE : <0>
> + - AUTO_NET_MII_MODE : <1>
> + - AUTO_EXP_MODE : <2>
> + - SMALL_PRINTERS_MODE : <3>
> + - EXTENDED_MODE : <4>
I'm not sure what this is. Is it representing packaging options on the
SoC or something like that? I'd personally expect the pinctrl driver to
expose the raw pinmux HW module's capabilities and each board's .dts
file to pick how to configure each option, rather than providing canned
options, but I guess not everyone agrees. Looking at the data in the
rest of the patch though, it looks like you have plenty of
pin/group/function definitions in the driver files though, so this
probably isn't a problem.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2 4/4] SPEAr3xx: Add pinctrl support for boards
2012-04-04 11:35 ` [PATCH V2 4/4] SPEAr3xx: Add pinctrl support for boards Viresh Kumar
@ 2012-04-04 22:32 ` Stephen Warren
2012-04-05 5:06 ` Viresh Kumar
0 siblings, 1 reply; 10+ messages in thread
From: Stephen Warren @ 2012-04-04 22:32 UTC (permalink / raw)
To: linux-arm-kernel
On 04/04/2012 05:35 AM, Viresh Kumar wrote:
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
> +++ b/arch/arm/mach-spear3xx/spear300.c
> +static struct pinctrl_map __initdata spear300_evb_pmx_map[] = {
> + /* spear3xx per-device maps */
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "i2c0"),
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "ssp0"),
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "mii0"),
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", NULL, "uart0"),
> +
> + /* spear310 per-device maps */
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "clcd_pfmode_grp",
> + "clcd"),
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "sdhci_4bit_grp",
> + "sdhci"),
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "gpio1_0_to_3_grp",
> + "gpio"),
> + PIN_MAP_MUX_GROUP_HOG_DEFAULT("99000000.pinmux", "gpio1_4_to_7_grp",
> + "gpio"),
> +};
>
> static void __init spear300_dt_init(void)
...
> +
> + if (of_machine_is_compatible("st,spear300-evb")) {
> + if (pinctrl_register_mappings(spear300_evb_pmx_map,
> + ARRAY_SIZE(spear300_evb_pmx_map)))
> + pr_err("Error registering pinmux map\n");
> + }
It'd be nice to put those mapping tables into device tree from the
start. Hopefully the core pinctrl support for DT will be in linux-next
today/tomorrow.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2 2/4] pinctrl: Add SPEAr pinctrl drivers
2012-04-04 22:11 ` Stephen Warren
@ 2012-04-05 4:56 ` Viresh Kumar
0 siblings, 0 replies; 10+ messages in thread
From: Viresh Kumar @ 2012-04-05 4:56 UTC (permalink / raw)
To: linux-arm-kernel
On 4/5/2012 3:41 AM, Stephen Warren wrote:
> On 04/04/2012 05:35 AM, Viresh Kumar wrote:
>> +int __devinit spear_pinctrl_probe(struct platform_device *pdev,
>> + struct spear_pinctrl_machdata *machdata)
>> +{
> ...
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> ...
>> + pmx->vbase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>
> If this driver is DT-only, you can replace those two calls with of_iomap().
Ya. This is DT-only. Will do that.
>> + platform_set_drvdata(pdev, pmx);
>
> This should probably before the pinctrl_register() call, just in case
> pinctrl_register() starts calling the pinctrl driver ops immediately,
> and the drvdata is needed by the callbacks.
I don't use platform_get_drvdata in ops. Only used in remove routine.
Still would move it up.
> (Yes, I should fix up the Tegra driver for both of those)
:)
>> + dev_info(&pdev->dev, "Registered with virtual address 0x%08x, physical address 0x%08x\n",
>> + (u32)pmx->vbase, res->start);
>
> Is that useful?
It does. Can easily check from boot prints that everything worked as planned.
>> +int __devexit spear_pinctrl_remove(struct platform_device *pdev)
>> +{
>> + struct spear_pmx *pmx = platform_get_drvdata(pdev);
>> +
>> + platform_set_drvdata(pdev, NULL);
>
> You don't need to do that; nothing should be touching the drvdata once
> the driver has been removed, so the value doesn't matter.
Why do most of the drivers do this? What can get called for them?
--
viresh
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2 3/4] pinctrl: Add SPEAr3xx pinctrl drivers
2012-04-04 22:26 ` [PATCH V2 3/4] pinctrl: Add SPEAr3xx pinctrl drivers Stephen Warren
@ 2012-04-05 5:05 ` Viresh Kumar
0 siblings, 0 replies; 10+ messages in thread
From: Viresh Kumar @ 2012-04-05 5:05 UTC (permalink / raw)
To: linux-arm-kernel
On 4/5/2012 3:56 AM, Stephen Warren wrote:
>> > +- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320
>> > + - Its values for SPEAr300:
>> > + - NAND_MODE : <0>
>> > + - NOR_MODE : <1>
>> > + - PHOTO_FRAME_MODE : <2>
>> > + - LEND_IP_PHONE_MODE : <3>
>> > + - HEND_IP_PHONE_MODE : <4>
>> > + - LEND_WIFI_PHONE_MODE : <5>
>> > + - HEND_WIFI_PHONE_MODE : <6>
>> > + - ATA_PABX_WI2S_MODE : <7>
>> > + - ATA_PABX_I2S_MODE : <8>
>> > + - CAML_LCDW_MODE : <9>
>> > + - CAMU_LCD_MODE : <10>
>> > + - CAMU_WLCD_MODE : <11>
>> > + - CAML_LCD_MODE : <12>
>> > + - Its values for SPEAr320:
>> > + - AUTO_NET_SMII_MODE : <0>
>> > + - AUTO_NET_MII_MODE : <1>
>> > + - AUTO_EXP_MODE : <2>
>> > + - SMALL_PRINTERS_MODE : <3>
>> > + - EXTENDED_MODE : <4>
> I'm not sure what this is. Is it representing packaging options on the
> SoC or something like that?
These aren't packaging options but Usage specific muxing options. Customers
can have different application scenarios where they need different group
of peripherals or their modes. And that kind of muxing is provided by these
modes. Within these modes, we can again have muxing of peripherals present
for that mode.
> I'd personally expect the pinctrl driver to
> expose the raw pinmux HW module's capabilities and each board's .dts
> file to pick how to configure each option, rather than providing canned
> options, but I guess not everyone agrees.
I believe this is what my driver is doing. It provides the raw functionality
provided by SoC, and now board dts can select mode and muxing options.
--
viresh
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2 4/4] SPEAr3xx: Add pinctrl support for boards
2012-04-04 22:32 ` Stephen Warren
@ 2012-04-05 5:06 ` Viresh Kumar
0 siblings, 0 replies; 10+ messages in thread
From: Viresh Kumar @ 2012-04-05 5:06 UTC (permalink / raw)
To: linux-arm-kernel
On 4/5/2012 4:02 AM, Stephen Warren wrote:
> It'd be nice to put those mapping tables into device tree from the
> start. Hopefully the core pinctrl support for DT will be in linux-next
> today/tomorrow.
Will do that. I wasn't sure about the state of your patchset for DT
with pinmux.
--
viresh
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-04-05 5:06 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-04 11:35 [PATCH V2 0/4] pinctrl: Add SPEAr pinctrl support Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 1/4] SPEAr: Remove existing padmux support for SPEAr Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 2/4] pinctrl: Add SPEAr pinctrl drivers Viresh Kumar
2012-04-04 22:11 ` Stephen Warren
2012-04-05 4:56 ` Viresh Kumar
2012-04-04 11:35 ` [PATCH V2 4/4] SPEAr3xx: Add pinctrl support for boards Viresh Kumar
2012-04-04 22:32 ` Stephen Warren
2012-04-05 5:06 ` Viresh Kumar
[not found] ` <2a78bbfab59b531adef0820f34f683dd736d3a3a.1333538870.git.viresh.kumar@st.com>
2012-04-04 22:26 ` [PATCH V2 3/4] pinctrl: Add SPEAr3xx pinctrl drivers Stephen Warren
2012-04-05 5:05 ` Viresh Kumar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.