* [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman
@ 2020-06-14 2:56 Simon Glass
2020-06-14 2:56 ` [PATCH v2 01/49] dm: core Fix long line in device_bind_common() Simon Glass
` (48 more replies)
0 siblings, 49 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Rockchip-based Chromebooks support booting from SPI flash. It is annoying
to have to manually build the SPI image when the SD image is built
automatically.
This feature is already available for x86 devices, so the existing
mechanism is reused. Briefly, this allows a BUILD_ROM environment variable
to be provided to indicate that any required binary blobs are present and
it is safe to build the ROM.
A new 'mkimage' type is added to binman to support building binaries
containing mkimagem using a binman definition to configure it. This avoids
Makefile/shell/Python code to do the same thing.
This series also migrates some rockchip boards to use binman to produce
their FIT as well, resulting in removing the fit_spl_optee.sh script.
Other archs and the rest of rockchip could be migrated too.
This series uses binman to produce a ROM image on two selected
Chromebooks, Bob (RK3399) and Jerry (RK3388).
Changes in v2:
- Add new binman patch to output errors to stderr
- Leave the old (object-directory) path in place
- Add patches to partially migrate rockchip to use binman
Simon Glass (49):
dm: core Fix long line in device_bind_common()
.gitignore: Ignore Python 3 cache directories
binman: Output errors to stderr
binman: cbfs: Fix IFWI typo
binman: Correct the search patch for pylibfdt
binman: Specify the toolpath when running test coverage
binman: Add support for calling mkimage
binman: Fix a few typos in the entry docs
binman: Adjust pylibfdt for incremental build
binman: Re-enable concurrent tests
binman: Use super() instead of specifying parent type
binman: Add an etype for external binary blobs
binman: Convert existing binary blobs to blob_ext
binman: Allow external binaries to be missing
patman: Update errors and warnings to use stderr
binman: Detect when valid images are not produced
binman: Allow missing Intel blobs
binman: Allow zero-length entries to overlap
mkimage: Allow updating the FIT timestamp
dtoc: Allow adding variable-sized data to a dtb
binman: Add support for generating a FIT
x86: rockchip: Change how selection of ROMs works
rockchip: Allow Bob to use SPI boot
Makefile: Allow building .rom files for non-x86 boards
rockchip: jerry: Add serial support
rockchip: bob: Support SPI-flash booting
rockchip: Enable building a SPI ROM image on jerry
rockchip: Enable building a SPI ROM image on bob
tegra: Drop the unused non-binman code
tegra: Don't enable binman on ARMv8 SoCs
Makefile: Rename ALL-y to INPUTS-y
powerpc: mpc85xx: Only enable binman when it is needed
x86: Makefile: Drop explicit targets built by binman
x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM
sunxi: Makefile: Drop explicit targets built by binman
tegra: Makefile: Drop explicit targets built by binman
mediatek: Makefile: Drop explicit targets built by binman
rockchip: Makefile: Drop explicit targets built by binman
Makefile: Move CONFIG_TOOLS_DEBUG check to later
Makefile: Fix a long line in cmd_mkfitimage
Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty
Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
rockchip: Convert evb-rk3288 over to use binman
rockchip: Convert evb-rk3229 over to use binman
rockchip: Drop the fit_spl_optee.sh script
x86: Move the fdtmap away from the binary blobs
x86: chromebook_link64: Correct the image layout
x86: chromebook_panther: Correct the image layout
x86: chromebook_samus_tpl: Correct the image layout
.gitignore | 3 +
Kconfig | 29 ++-
Makefile | 170 ++++++++----------
arch/Kconfig | 1 +
arch/arm/config.mk | 10 +-
arch/arm/dts/rk322x-u-boot.dtsi | 72 ++++++++
arch/arm/dts/rk322x.dtsi | 1 +
arch/arm/dts/rk3288-u-boot.dtsi | 25 +++
arch/arm/dts/rk3399-gru-u-boot.dtsi | 4 +
arch/arm/dts/rk3399-gru.dtsi | 2 +-
arch/arm/dts/rk3399-u-boot.dtsi | 27 +++
arch/arm/dts/rockchip-u-boot.dtsi | 10 +-
arch/arm/mach-at91/config.mk | 2 +-
arch/arm/mach-davinci/config.mk | 2 +-
arch/arm/mach-k3/config.mk | 10 +-
arch/arm/mach-keystone/config.mk | 4 +-
arch/arm/mach-omap2/config.mk | 28 +--
arch/arm/mach-rmobile/Makefile | 2 +-
arch/arm/mach-rockchip/fit_spl_optee.sh | 84 ---------
arch/arm/mach-rockchip/rk3288/Kconfig | 1 +
arch/arm/mach-rockchip/rk3399/Kconfig | 1 +
arch/arm/mach-rockchip/spl.c | 3 +-
arch/arm/mach-stm32mp/config.mk | 4 +-
arch/arm/mach-tegra/Kconfig | 2 +-
arch/powerpc/Kconfig | 2 +-
arch/x86/Kconfig | 11 +-
arch/x86/cpu/baytrail/Kconfig | 1 +
arch/x86/cpu/quark/Kconfig | 1 +
arch/x86/dts/u-boot.dtsi | 10 +-
board/BuR/brppt1/config.mk | 4 +-
board/BuR/brppt2/config.mk | 4 +-
board/BuR/brsmarc1/config.mk | 6 +-
board/imgtec/boston/config.mk | 2 +-
board/intel/edison/config.mk | 2 +-
configs/am335x_evm_defconfig | 1 +
configs/am335x_hs_evm_defconfig | 1 +
configs/am335x_hs_evm_uart_defconfig | 1 +
configs/am43xx_evm_defconfig | 1 +
configs/am43xx_evm_rtconly_defconfig | 1 +
configs/am43xx_evm_usbhost_boot_defconfig | 1 +
configs/am43xx_hs_evm_defconfig | 1 +
configs/am57xx_evm_defconfig | 1 +
configs/am57xx_hs_evm_defconfig | 1 +
configs/am57xx_hs_evm_usb_defconfig | 1 +
configs/am65x_evm_a53_defconfig | 1 +
configs/am65x_evm_r5_defconfig | 1 +
configs/am65x_hs_evm_a53_defconfig | 1 +
configs/am65x_hs_evm_r5_defconfig | 1 +
configs/chromebook_bob_defconfig | 4 +-
configs/chromebook_jerry_defconfig | 1 +
configs/chromebook_link64_defconfig | 2 +
configs/chromebook_samus_tpl_defconfig | 2 +-
configs/chromebox_panther_defconfig | 2 +
configs/dh_imx6_defconfig | 1 +
configs/display5_defconfig | 1 +
configs/display5_factory_defconfig | 1 +
configs/dra7xx_evm_defconfig | 1 +
configs/dra7xx_hs_evm_defconfig | 1 +
configs/dra7xx_hs_evm_usb_defconfig | 1 +
configs/evb-rk3229_defconfig | 2 +-
configs/evb-rk3288_defconfig | 2 +-
configs/imx6qdl_icore_mipi_defconfig | 1 +
configs/imx6qdl_icore_mmc_defconfig | 1 +
configs/imx6qdl_icore_rqs_defconfig | 1 +
configs/j721e_evm_a72_defconfig | 1 +
configs/j721e_evm_r5_defconfig | 1 +
configs/j721e_hs_evm_a72_defconfig | 1 +
configs/j721e_hs_evm_r5_defconfig | 1 +
configs/ls1046ardb_qspi_spl_defconfig | 1 +
configs/mccmon6_nor_defconfig | 1 +
configs/mccmon6_sd_defconfig | 1 +
configs/mx6sabreauto_defconfig | 1 +
configs/mx6sabresd_defconfig | 1 +
configs/pico-imx6_defconfig | 1 +
configs/qemu-x86_64_defconfig | 2 +-
configs/qemu-x86_defconfig | 1 -
configs/sandbox_spl_defconfig | 1 +
configs/socfpga_arria10_defconfig | 1 +
configs/stm32mp15_dhcom_basic_defconfig | 1 +
configs/stm32mp15_dhcor_basic_defconfig | 1 +
configs/wandboard_defconfig | 1 +
configs/xilinx_zynq_virt_defconfig | 1 +
doc/mkimage.1 | 9 +
drivers/core/device.c | 3 +-
scripts/Makefile.spl | 24 +--
scripts/dtc/pylibfdt/Makefile | 3 +
tools/binman/README | 2 +-
tools/binman/README.entries | 80 ++++++++-
tools/binman/cmdline.py | 2 +
tools/binman/control.py | 19 +-
tools/binman/entry.py | 21 +++
tools/binman/etype/_testing.py | 9 +-
tools/binman/etype/blob.py | 2 +-
tools/binman/etype/blob_dtb.py | 6 +-
tools/binman/etype/blob_ext.py | 39 ++++
tools/binman/etype/blob_named_by_arg.py | 2 +-
tools/binman/etype/cbfs.py | 16 +-
tools/binman/etype/cros_ec_rw.py | 4 +-
tools/binman/etype/fdtmap.py | 2 +-
tools/binman/etype/files.py | 2 +-
tools/binman/etype/fill.py | 4 +-
tools/binman/etype/fit.py | 164 +++++++++++++++++
tools/binman/etype/fmap.py | 2 +-
tools/binman/etype/gbb.py | 2 +-
tools/binman/etype/image_header.py | 4 +-
tools/binman/etype/intel_cmc.py | 7 +-
tools/binman/etype/intel_descriptor.py | 15 +-
tools/binman/etype/intel_fit.py | 8 +-
tools/binman/etype/intel_fit_ptr.py | 8 +-
tools/binman/etype/intel_fsp.py | 7 +-
tools/binman/etype/intel_fsp_m.py | 7 +-
tools/binman/etype/intel_fsp_s.py | 7 +-
tools/binman/etype/intel_fsp_t.py | 7 +-
tools/binman/etype/intel_ifwi.py | 25 ++-
tools/binman/etype/intel_me.py | 7 +-
tools/binman/etype/intel_mrc.py | 7 +-
tools/binman/etype/intel_refcode.py | 7 +-
tools/binman/etype/intel_vbt.py | 7 +-
tools/binman/etype/intel_vga.py | 7 +-
tools/binman/etype/mkimage.py | 62 +++++++
.../etype/powerpc_mpc85xx_bootpg_resetvec.py | 3 +-
tools/binman/etype/section.py | 53 ++++--
tools/binman/etype/text.py | 2 +-
tools/binman/etype/u_boot.py | 2 +-
tools/binman/etype/u_boot_dtb.py | 2 +-
tools/binman/etype/u_boot_dtb_with_ucode.py | 4 +-
tools/binman/etype/u_boot_elf.py | 4 +-
tools/binman/etype/u_boot_img.py | 2 +-
tools/binman/etype/u_boot_nodtb.py | 2 +-
tools/binman/etype/u_boot_spl.py | 2 +-
tools/binman/etype/u_boot_spl_bss_pad.py | 2 +-
tools/binman/etype/u_boot_spl_dtb.py | 2 +-
tools/binman/etype/u_boot_spl_elf.py | 2 +-
tools/binman/etype/u_boot_spl_nodtb.py | 2 +-
.../binman/etype/u_boot_spl_with_ucode_ptr.py | 2 +-
tools/binman/etype/u_boot_tpl.py | 2 +-
tools/binman/etype/u_boot_tpl_dtb.py | 2 +-
.../binman/etype/u_boot_tpl_dtb_with_ucode.py | 2 +-
tools/binman/etype/u_boot_tpl_elf.py | 2 +-
.../binman/etype/u_boot_tpl_with_ucode_ptr.py | 2 +-
tools/binman/etype/u_boot_ucode.py | 2 +-
tools/binman/etype/u_boot_with_ucode_ptr.py | 2 +-
tools/binman/etype/vblock.py | 2 +-
tools/binman/etype/x86_reset16.py | 2 +-
tools/binman/etype/x86_reset16_spl.py | 2 +-
tools/binman/etype/x86_reset16_tpl.py | 2 +-
tools/binman/etype/x86_start16.py | 2 +-
tools/binman/etype/x86_start16_spl.py | 2 +-
tools/binman/etype/x86_start16_tpl.py | 2 +-
tools/binman/ftest.py | 140 ++++++++++++++-
tools/binman/image.py | 12 +-
tools/binman/main.py | 13 +-
tools/binman/test/156_mkimage.dts | 23 +++
tools/binman/test/157_blob_ext.dts | 14 ++
tools/binman/test/158_blob_ext_missing.dts | 16 ++
.../binman/test/159_blob_ext_missing_sect.dts | 23 +++
tools/binman/test/160_pack_overlap_zero.dts | 18 ++
tools/binman/test/161_fit.dts | 62 +++++++
tools/binman/test/162_fit_external.dts | 64 +++++++
tools/dtoc/fdt.py | 17 +-
tools/dtoc/test_fdt.py | 4 +
tools/fit_image.c | 2 +-
tools/imagetool.h | 1 +
tools/mkimage.c | 5 +-
tools/patman/test_util.py | 13 +-
tools/patman/tools.py | 8 +-
tools/patman/tout.py | 6 +-
167 files changed, 1350 insertions(+), 411 deletions(-)
create mode 100644 arch/arm/dts/rk322x-u-boot.dtsi
delete mode 100755 arch/arm/mach-rockchip/fit_spl_optee.sh
create mode 100644 tools/binman/etype/blob_ext.py
create mode 100644 tools/binman/etype/fit.py
create mode 100644 tools/binman/etype/mkimage.py
create mode 100644 tools/binman/test/156_mkimage.dts
create mode 100644 tools/binman/test/157_blob_ext.dts
create mode 100644 tools/binman/test/158_blob_ext_missing.dts
create mode 100644 tools/binman/test/159_blob_ext_missing_sect.dts
create mode 100644 tools/binman/test/160_pack_overlap_zero.dts
create mode 100644 tools/binman/test/161_fit.dts
create mode 100644 tools/binman/test/162_fit_external.dts
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 01/49] dm: core Fix long line in device_bind_common()
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories Simon Glass
` (47 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Fix an over-length line in this function.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
drivers/core/device.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/core/device.c b/drivers/core/device.c
index a7408d9c76..2e3d555ea4 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -82,7 +82,8 @@ static int device_bind_common(struct udevice *parent, const struct driver *drv,
* This is just a 'requested' sequence, and will be
* resolved (and ->seq updated) when the device is probed.
*/
- if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
+ if (CONFIG_IS_ENABLED(OF_CONTROL) &&
+ !CONFIG_IS_ENABLED(OF_PLATDATA)) {
if (uc->uc_drv->name && ofnode_valid(node))
dev_read_alias_seq(dev, &dev->req_seq);
#if CONFIG_IS_ENABLED(OF_PRIOR_STAGE)
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
2020-06-14 2:56 ` [PATCH v2 01/49] dm: core Fix long line in device_bind_common() Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 03/49] binman: Output errors to stderr Simon Glass
` (46 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
These can appear when moving between branches that have different tools
in the tree. Ignore them.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
.gitignore | 3 +++
1 file changed, 3 insertions(+)
diff --git a/.gitignore b/.gitignore
index 2e1c8bf2bf..e66aa864da 100644
--- a/.gitignore
+++ b/.gitignore
@@ -92,3 +92,6 @@ GTAGS
*.orig
*~
\#*#
+
+# Python cache
+__pycache__
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 03/49] binman: Output errors to stderr
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
2020-06-14 2:56 ` [PATCH v2 01/49] dm: core Fix long line in device_bind_common() Simon Glass
2020-06-14 2:56 ` [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 04/49] binman: cbfs: Fix IFWI typo Simon Glass
` (45 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
At present binman outputs errors to stdout which means that fails are
effectively silent when printed by buildman, for example. Fix this by
outputing errors to stderr.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
Changes in v2:
- Add new binman patch to output errors to stderr
tools/binman/main.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/binman/main.py b/tools/binman/main.py
index efa7fa8386..0ab2bb6206 100755
--- a/tools/binman/main.py
+++ b/tools/binman/main.py
@@ -123,7 +123,7 @@ def RunBinman(args):
try:
ret_code = control.Binman(args)
except Exception as e:
- print('binman: %s' % e)
+ print('binman: %s' % e, file=sys.stderr)
if args.debug:
print()
traceback.print_exc()
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 04/49] binman: cbfs: Fix IFWI typo
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (2 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 03/49] binman: Output errors to stderr Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 05/49] binman: Correct the search patch for pylibfdt Simon Glass
` (44 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
This comment references the wrong thing. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/etype/cbfs.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/binman/etype/cbfs.py b/tools/binman/etype/cbfs.py
index e9aed8310c..744a32fa0c 100644
--- a/tools/binman/etype/cbfs.py
+++ b/tools/binman/etype/cbfs.py
@@ -204,7 +204,7 @@ class Entry_cbfs(Entry):
return True
def _ReadSubnodes(self):
- """Read the subnodes to find out what should go in this IFWI"""
+ """Read the subnodes to find out what should go in this CBFS"""
for node in self._node.subnodes:
entry = Entry.Create(self, node)
entry.ReadNode()
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 05/49] binman: Correct the search patch for pylibfdt
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (3 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 04/49] binman: cbfs: Fix IFWI typo Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 06/49] binman: Specify the toolpath when running test coverage Simon Glass
` (43 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Now that binman uses tools/ as its base directory for importing modules,
the path to the pylibfdt build by U-Boot is incorrect. Fix it with a new
path.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
Changes in v2:
- Leave the old (object-directory) path in place
tools/binman/main.py | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/binman/main.py b/tools/binman/main.py
index 0ab2bb6206..6f5a9d1ca2 100755
--- a/tools/binman/main.py
+++ b/tools/binman/main.py
@@ -26,6 +26,7 @@ from patman import test_util
# Bring in the libfdt module
sys.path.insert(2, 'scripts/dtc/pylibfdt')
+sys.path.insert(2, os.path.join(our_path, '../../scripts/dtc/pylibfdt'))
sys.path.insert(2, os.path.join(our_path,
'../../build-sandbox_spl/scripts/dtc/pylibfdt'))
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 06/49] binman: Specify the toolpath when running test coverage
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (4 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 05/49] binman: Correct the search patch for pylibfdt Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-14 2:56 ` [PATCH v2 07/49] binman: Add support for calling mkimage Simon Glass
` (42 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
At present binman's test coverage runs without a toolpath set. This means
that the system tools will be used. That may not be correct if they are
out of date or missing and this can result in a reduction in test coverage
below 100%.
Provide the toolpath to binman in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/main.py | 10 +++++++---
tools/patman/test_util.py | 9 ++++++---
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/tools/binman/main.py b/tools/binman/main.py
index 6f5a9d1ca2..a5793d5d23 100755
--- a/tools/binman/main.py
+++ b/tools/binman/main.py
@@ -89,14 +89,18 @@ def GetEntryModules(include_testing=True):
for item in glob_list
if include_testing or '_testing' not in item])
-def RunTestCoverage():
+def RunTestCoverage(toolpath):
"""Run the tests and check that we get 100% coverage"""
glob_list = GetEntryModules(False)
all_set = set([os.path.splitext(os.path.basename(item))[0]
for item in glob_list if '_testing' not in item])
+ extra_args = ''
+ if toolpath:
+ for path in toolpath:
+ extra_args += ' --toolpath %s' % path
test_util.RunTestCoverage('tools/binman/binman', None,
['*test*', '*main.py', 'tools/patman/*', 'tools/dtoc/*'],
- args.build_dir, all_set)
+ args.build_dir, all_set, extra_args or None)
def RunBinman(args):
"""Main entry point to binman once arguments are parsed
@@ -111,7 +115,7 @@ def RunBinman(args):
if args.cmd == 'test':
if args.test_coverage:
- RunTestCoverage()
+ RunTestCoverage(args.toolpath)
else:
ret_code = RunTests(args.debug, args.verbosity, args.processes,
args.test_preserve_dirs, args.tests,
diff --git a/tools/patman/test_util.py b/tools/patman/test_util.py
index 4d28d9fc92..467797e380 100644
--- a/tools/patman/test_util.py
+++ b/tools/patman/test_util.py
@@ -22,7 +22,8 @@ except:
use_concurrent = False
-def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None):
+def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None,
+ extra_args=None):
"""Run tests and check that we get 100% coverage
Args:
@@ -35,6 +36,8 @@ def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None):
calculation
build_dir: Build directory, used to locate libfdt.py
required: List of modules which must be in the coverage report
+ extra_args (str): Extra arguments to pass to the tool before the -t/test
+ arg
Raises:
ValueError if the code coverage is not 100%
@@ -53,8 +56,8 @@ def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None):
if build_dir:
prefix = 'PYTHONPATH=$PYTHONPATH:%s/sandbox_spl/tools ' % build_dir
cmd = ('%spython3-coverage run '
- '--omit "%s" %s %s -P1' % (prefix, ','.join(glob_list),
- prog, test_cmd))
+ '--omit "%s" %s %s %s -P1' % (prefix, ','.join(glob_list),
+ prog, extra_args or '', test_cmd))
os.system(cmd)
stdout = command.Output('python3-coverage', 'report')
lines = stdout.splitlines()
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 07/49] binman: Add support for calling mkimage
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (5 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 06/49] binman: Specify the toolpath when running test coverage Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-14 2:56 ` [PATCH v2 08/49] binman: Fix a few typos in the entry docs Simon Glass
` (41 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
As a first step to integrating mkimage into binman, add a new entry type
that feeds data into mkimage for processing and incorporates that output
into the image.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/README.entries | 23 ++++++++++++
tools/binman/etype/_testing.py | 5 +++
tools/binman/etype/mkimage.py | 62 +++++++++++++++++++++++++++++++
tools/binman/ftest.py | 7 ++++
tools/binman/test/156_mkimage.dts | 23 ++++++++++++
5 files changed, 120 insertions(+)
create mode 100644 tools/binman/etype/mkimage.py
create mode 100644 tools/binman/test/156_mkimage.dts
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index 6a816bba6b..4f2c48fdc2 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -587,6 +587,29 @@ See README.x86 for information about Intel binary blobs.
+Entry: mkimage: Entry containing a binary produced by mkimage
+-------------------------------------------------------------
+
+Properties / Entry arguments:
+ - datafile: Filename for -d argument
+ - args: Other arguments to pass
+
+The data passed to mkimage is collected from subnodes of the mkimage node,
+e.g.:
+
+ mkimage {
+ args = "-n test -T imximage";
+
+ u-boot-spl {
+ };
+ };
+
+This calls mkimage to create an imximage with u-boot-spl.bin as the input
+file. The output from mkimage then becomes part of the image produced by
+binman.
+
+
+
Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code for U-Boot
-----------------------------------------------------------------------------------------
diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py
index ed718eed14..ea60561adb 100644
--- a/tools/binman/etype/_testing.py
+++ b/tools/binman/etype/_testing.py
@@ -57,6 +57,8 @@ class Entry__testing(Entry):
'return-contents-once')
self.bad_update_contents_twice = fdt_util.GetBool(self._node,
'bad-update-contents-twice')
+ self.return_contents_later = fdt_util.GetBool(self._node,
+ 'return-contents-later')
# Set to True when the entry is ready to process the FDT.
self.process_fdt_ready = False
@@ -83,6 +85,9 @@ class Entry__testing(Entry):
def ObtainContents(self):
if self.return_unknown_contents or not self.return_contents:
return False
+ if self.return_contents_later:
+ self.return_contents_later = False
+ return False
self.data = self.contents
self.contents_size = len(self.data)
if self.return_contents_once:
diff --git a/tools/binman/etype/mkimage.py b/tools/binman/etype/mkimage.py
new file mode 100644
index 0000000000..1aa563963a
--- /dev/null
+++ b/tools/binman/etype/mkimage.py
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for producing an image using mkimage
+#
+
+from collections import OrderedDict
+
+from binman.entry import Entry
+from dtoc import fdt_util
+from patman import tools
+
+class Entry_mkimage(Entry):
+ """Entry containing a binary produced by mkimage
+
+ Properties / Entry arguments:
+ - datafile: Filename for -d argument
+ - args: Other arguments to pass
+
+ The data passed to mkimage is collected from subnodes of the mkimage node,
+ e.g.:
+
+ mkimage {
+ args = "-n test -T imximage";
+
+ u-boot-spl {
+ };
+ };
+
+ This calls mkimage to create an imximage with u-boot-spl.bin as the input
+ file. The output from mkimage then becomes part of the image produced by
+ binman.
+ """
+ def __init__(self, section, etype, node):
+ Entry.__init__(self, section, etype, node)
+ self._args = fdt_util.GetString(self._node, 'args').split(' ')
+ self._mkimage_entries = OrderedDict()
+ self._ReadSubnodes()
+
+ def ObtainContents(self):
+ data = b''
+ for entry in self._mkimage_entries.values():
+ # First get the input data and put it in a file. If not available,
+ # try later.
+ if not entry.ObtainContents():
+ return False
+ data += entry.GetData()
+ uniq = self.GetUniqueName()
+ input_fname = tools.GetOutputFilename('mkimage.%s' % uniq)
+ tools.WriteFile(input_fname, data)
+ output_fname = tools.GetOutputFilename('mkimage-out.%s' % uniq)
+ tools.Run('mkimage', '-d', input_fname, *self._args, output_fname)
+ self.SetContents(tools.ReadFile(output_fname))
+ return True
+
+ def _ReadSubnodes(self):
+ """Read the subnodes to find out what should go in this image"""
+ for node in self._node.subnodes:
+ entry = Entry.Create(self, node)
+ entry.ReadNode()
+ self._mkimage_entries[entry.name] = entry
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 5e24920088..39e67b9042 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -3357,6 +3357,13 @@ class TestFunctional(unittest.TestCase):
data = self._DoReadFile('154_intel_fsp_t.dts')
self.assertEqual(FSP_T_DATA, data[:len(FSP_T_DATA)])
+ def testMkimage(self):
+ """Test using mkimage to build an image"""
+ data = self._DoReadFile('156_mkimage.dts')
+
+ # Just check that the data appears in the file somewhere
+ self.assertIn(U_BOOT_SPL_DATA, data)
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/156_mkimage.dts b/tools/binman/test/156_mkimage.dts
new file mode 100644
index 0000000000..933b13143a
--- /dev/null
+++ b/tools/binman/test/156_mkimage.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <0x80>;
+
+ mkimage {
+ args = "-n test -T script";
+
+ u-boot-spl {
+ };
+
+ _testing {
+ return-contents-later;
+ };
+ };
+ };
+};
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 08/49] binman: Fix a few typos in the entry docs
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (6 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 07/49] binman: Add support for calling mkimage Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build Simon Glass
` (40 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Some typos have been fixed in the code but the entry docs were not
regenerated. Fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/README.entries | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index 4f2c48fdc2..d5b4b3af2b 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -519,7 +519,7 @@ Properties / Entry arguments:
This file contains code used by the SoC that is required to make it work.
The Management Engine is like a background task that runs things that are
-not clearly documented, but may include keyboard, display and network
+not clearly documented, but may include keyboard, deplay and network
access. For platform that use ME it is not possible to disable it. U-Boot
does not directly execute code in the ME binary.
@@ -616,7 +616,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f
Properties / Entry arguments:
- filename: Filename of u-boot-br.bin (default 'u-boot-br.bin')
-This entry is valid for PowerPC mpc85xx cpus. This entry holds
+This enrty is valid for PowerPC mpc85xx cpus. This entry holds
'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be
placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (7 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 08/49] binman: Fix a few typos in the entry docs Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 10/49] binman: Re-enable concurrent tests Simon Glass
` (39 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
If the pylibfdt shared-object file is detected, then Python assumes that
the libfdt.py file exists also.
Sometimes when an incremental build aborts, the shared-object file is
built but the libfdt.py is not. The only way out at this point is to use
'make mkproper', or similar.
Fix this by removing the .so file before it is built. This seems to make
Python rebuild everything.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
scripts/dtc/pylibfdt/Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git a/scripts/dtc/pylibfdt/Makefile b/scripts/dtc/pylibfdt/Makefile
index 42342c75bb..80b6ad2ae7 100644
--- a/scripts/dtc/pylibfdt/Makefile
+++ b/scripts/dtc/pylibfdt/Makefile
@@ -24,6 +24,9 @@ quiet_cmd_pymod = PYMOD $@
$(PYTHON3) $< --quiet build_ext --inplace
$(obj)/_libfdt.so: $(src)/setup.py $(PYLIBFDT_srcs) FORCE
+ @# Remove the library since otherwise Python doesn't seem to regenerate
+ @# the libfdt.py file if it is missing.
+ rm -f $(obj)/_libfdt*.so
$(call if_changed,pymod)
always += _libfdt.so
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 10/49] binman: Re-enable concurrent tests
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (8 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-14 2:56 ` [PATCH v2 11/49] binman: Use super() instead of specifying parent type Simon Glass
` (38 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
With the change to absolute imports the concurrent tests feature
unfortunately broke. Fix it.
We cannot easy add a warning, since the output messes up tests which check
the output.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/patman/test_util.py | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/patman/test_util.py b/tools/patman/test_util.py
index 467797e380..2ef4e52de8 100644
--- a/tools/patman/test_util.py
+++ b/tools/patman/test_util.py
@@ -17,7 +17,8 @@ from io import StringIO
use_concurrent = True
try:
- from concurrencytest import ConcurrentTestSuite, fork_for_tests
+ from concurrencytest.concurrencytest import ConcurrentTestSuite
+ from concurrencytest.concurrencytest import fork_for_tests
except:
use_concurrent = False
@@ -51,6 +52,7 @@ def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None,
glob_list = []
glob_list += exclude_list
glob_list += ['*libfdt.py', '*site-packages*', '*dist-packages*']
+ glob_list += ['*concurrencytest*']
test_cmd = 'test' if 'binman' in prog else '-t'
prefix = ''
if build_dir:
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 11/49] binman: Use super() instead of specifying parent type
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (9 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 10/49] binman: Re-enable concurrent tests Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 12/49] binman: Add an etype for external binary blobs Simon Glass
` (37 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
It is easier and less error-prone to use super() when the parent type is
needed. Update binman to remove the type names.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/etype/_testing.py | 4 ++--
tools/binman/etype/blob.py | 2 +-
tools/binman/etype/blob_dtb.py | 6 +++---
tools/binman/etype/blob_named_by_arg.py | 2 +-
tools/binman/etype/cbfs.py | 14 +++++++-------
tools/binman/etype/cros_ec_rw.py | 3 +--
tools/binman/etype/fdtmap.py | 2 +-
tools/binman/etype/files.py | 2 +-
tools/binman/etype/fill.py | 4 ++--
tools/binman/etype/fmap.py | 2 +-
tools/binman/etype/gbb.py | 2 +-
| 4 ++--
tools/binman/etype/intel_cmc.py | 2 +-
tools/binman/etype/intel_descriptor.py | 4 ++--
tools/binman/etype/intel_fit.py | 4 ++--
tools/binman/etype/intel_fit_ptr.py | 4 ++--
tools/binman/etype/intel_fsp.py | 2 +-
tools/binman/etype/intel_fsp_m.py | 2 +-
tools/binman/etype/intel_fsp_s.py | 2 +-
tools/binman/etype/intel_fsp_t.py | 2 +-
tools/binman/etype/intel_ifwi.py | 4 ++--
tools/binman/etype/intel_me.py | 2 +-
tools/binman/etype/intel_mrc.py | 2 +-
tools/binman/etype/intel_refcode.py | 2 +-
tools/binman/etype/intel_vbt.py | 2 +-
tools/binman/etype/intel_vga.py | 2 +-
tools/binman/etype/mkimage.py | 2 +-
.../etype/powerpc_mpc85xx_bootpg_resetvec.py | 2 +-
tools/binman/etype/section.py | 16 ++++++++--------
tools/binman/etype/text.py | 2 +-
tools/binman/etype/u_boot.py | 2 +-
tools/binman/etype/u_boot_dtb.py | 2 +-
tools/binman/etype/u_boot_dtb_with_ucode.py | 4 ++--
tools/binman/etype/u_boot_elf.py | 4 ++--
tools/binman/etype/u_boot_img.py | 2 +-
tools/binman/etype/u_boot_nodtb.py | 2 +-
tools/binman/etype/u_boot_spl.py | 2 +-
tools/binman/etype/u_boot_spl_bss_pad.py | 2 +-
tools/binman/etype/u_boot_spl_dtb.py | 2 +-
tools/binman/etype/u_boot_spl_elf.py | 2 +-
tools/binman/etype/u_boot_spl_nodtb.py | 2 +-
tools/binman/etype/u_boot_spl_with_ucode_ptr.py | 2 +-
tools/binman/etype/u_boot_tpl.py | 2 +-
tools/binman/etype/u_boot_tpl_dtb.py | 2 +-
tools/binman/etype/u_boot_tpl_dtb_with_ucode.py | 2 +-
tools/binman/etype/u_boot_tpl_elf.py | 2 +-
tools/binman/etype/u_boot_tpl_with_ucode_ptr.py | 2 +-
tools/binman/etype/u_boot_ucode.py | 2 +-
tools/binman/etype/u_boot_with_ucode_ptr.py | 2 +-
tools/binman/etype/vblock.py | 2 +-
tools/binman/etype/x86_reset16.py | 2 +-
tools/binman/etype/x86_reset16_spl.py | 2 +-
tools/binman/etype/x86_reset16_tpl.py | 2 +-
tools/binman/etype/x86_start16.py | 2 +-
tools/binman/etype/x86_start16_spl.py | 2 +-
tools/binman/etype/x86_start16_tpl.py | 2 +-
tools/binman/image.py | 12 ++++++------
57 files changed, 86 insertions(+), 87 deletions(-)
diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py
index ea60561adb..0800c25899 100644
--- a/tools/binman/etype/_testing.py
+++ b/tools/binman/etype/_testing.py
@@ -41,10 +41,10 @@ class Entry__testing(Entry):
data type (generating an error)
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def ReadNode(self):
- Entry.ReadNode(self)
+ super().ReadNode()
self.return_invalid_entry = fdt_util.GetBool(self._node,
'return-invalid-entry')
self.return_unknown_contents = fdt_util.GetBool(self._node,
diff --git a/tools/binman/etype/blob.py b/tools/binman/etype/blob.py
index ede7a7a68c..e507203709 100644
--- a/tools/binman/etype/blob.py
+++ b/tools/binman/etype/blob.py
@@ -31,7 +31,7 @@ class Entry_blob(Entry):
data.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._filename = fdt_util.GetString(self._node, 'filename', self.etype)
self.compress = fdt_util.GetString(self._node, 'compress', 'none')
diff --git a/tools/binman/etype/blob_dtb.py b/tools/binman/etype/blob_dtb.py
index 6c06943763..724647a7bb 100644
--- a/tools/binman/etype/blob_dtb.py
+++ b/tools/binman/etype/blob_dtb.py
@@ -20,13 +20,13 @@ class Entry_blob_dtb(Entry_blob):
global state
from binman import state
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def ObtainContents(self):
"""Get the device-tree from the list held by the 'state' module"""
self._filename = self.GetDefaultFilename()
self._pathname, _ = state.GetFdtContents(self.GetFdtEtype())
- return Entry_blob.ReadBlobContents(self)
+ return super().ReadBlobContents()
def ProcessContents(self):
"""Re-read the DTB contents so that we get any calculated properties"""
@@ -57,7 +57,7 @@ class Entry_blob_dtb(Entry_blob):
return {self.GetFdtEtype(): [self, fname]}
def WriteData(self, data, decomp=True):
- ok = Entry_blob.WriteData(self, data, decomp)
+ ok = super().WriteData(data, decomp)
# Update the state module, since it has the authoritative record of the
# device trees used. If we don't do this, then state.GetFdtContents()
diff --git a/tools/binman/etype/blob_named_by_arg.py b/tools/binman/etype/blob_named_by_arg.py
index 3b4593f071..e95dabe4d0 100644
--- a/tools/binman/etype/blob_named_by_arg.py
+++ b/tools/binman/etype/blob_named_by_arg.py
@@ -29,6 +29,6 @@ class Entry_blob_named_by_arg(Entry_blob):
See cros_ec_rw for an example of this.
"""
def __init__(self, section, etype, node, blob_fname):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._filename, = self.GetEntryArgsOrProps(
[EntryArg('%s-path' % blob_fname, str)])
diff --git a/tools/binman/etype/cbfs.py b/tools/binman/etype/cbfs.py
index 744a32fa0c..650ab2c292 100644
--- a/tools/binman/etype/cbfs.py
+++ b/tools/binman/etype/cbfs.py
@@ -167,7 +167,7 @@ class Entry_cbfs(Entry):
global state
from binman import state
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._cbfs_arg = fdt_util.GetString(node, 'cbfs-arch', 'x86')
self._cbfs_entries = OrderedDict()
self._ReadSubnodes()
@@ -226,7 +226,7 @@ class Entry_cbfs(Entry):
Args:
image_pos: Position of this entry in the image
"""
- Entry.SetImagePos(self, image_pos)
+ super().SetImagePos(image_pos)
# Now update the entries with info from the CBFS entries
for entry in self._cbfs_entries.values():
@@ -238,7 +238,7 @@ class Entry_cbfs(Entry):
entry.uncomp_size = cfile.memlen
def AddMissingProperties(self):
- Entry.AddMissingProperties(self)
+ super().AddMissingProperties()
for entry in self._cbfs_entries.values():
entry.AddMissingProperties()
if entry._cbfs_compress:
@@ -250,7 +250,7 @@ class Entry_cbfs(Entry):
def SetCalculatedProperties(self):
"""Set the value of device-tree properties calculated by binman"""
- Entry.SetCalculatedProperties(self)
+ super().SetCalculatedProperties()
for entry in self._cbfs_entries.values():
state.SetInt(entry._node, 'offset', entry.offset)
state.SetInt(entry._node, 'size', entry.size)
@@ -260,7 +260,7 @@ class Entry_cbfs(Entry):
def ListEntries(self, entries, indent):
"""Override this method to list all files in the section"""
- Entry.ListEntries(self, entries, indent)
+ super().ListEntries(entries, indent)
for entry in self._cbfs_entries.values():
entry.ListEntries(entries, indent + 1)
@@ -268,12 +268,12 @@ class Entry_cbfs(Entry):
return self._cbfs_entries
def ReadData(self, decomp=True):
- data = Entry.ReadData(self, True)
+ data = super().ReadData(True)
return data
def ReadChildData(self, child, decomp=True):
if not self.reader:
- data = Entry.ReadData(self, True)
+ data = super().ReadData(True)
self.reader = cbfs_util.CbfsReader(data)
reader = self.reader
cfile = reader.files.get(child.name)
diff --git a/tools/binman/etype/cros_ec_rw.py b/tools/binman/etype/cros_ec_rw.py
index 0dbe14b342..7ad62d0265 100644
--- a/tools/binman/etype/cros_ec_rw.py
+++ b/tools/binman/etype/cros_ec_rw.py
@@ -18,5 +18,4 @@ class Entry_cros_ec_rw(Entry_blob_named_by_arg):
updating the EC on startup via software sync.
"""
def __init__(self, section, etype, node):
- Entry_blob_named_by_arg.__init__(self, section, etype, node,
- 'cros-ec-rw')
+ super().__init__(section, etype, node, 'cros-ec-rw')
diff --git a/tools/binman/etype/fdtmap.py b/tools/binman/etype/fdtmap.py
index aa8807990b..6ca88a100e 100644
--- a/tools/binman/etype/fdtmap.py
+++ b/tools/binman/etype/fdtmap.py
@@ -85,7 +85,7 @@ class Entry_fdtmap(Entry):
from binman import state
from dtoc.fdt import Fdt
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def _GetFdtmap(self):
"""Build an FDT map from the entries in the current image
diff --git a/tools/binman/etype/files.py b/tools/binman/etype/files.py
index 10ab585f0e..9adb3afeb1 100644
--- a/tools/binman/etype/files.py
+++ b/tools/binman/etype/files.py
@@ -32,7 +32,7 @@ class Entry_files(Entry_section):
global state
from binman import state
- Entry_section.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._pattern = fdt_util.GetString(self._node, 'pattern')
if not self._pattern:
self.Raise("Missing 'pattern' property")
diff --git a/tools/binman/etype/fill.py b/tools/binman/etype/fill.py
index 860410ed6e..efb2d13e91 100644
--- a/tools/binman/etype/fill.py
+++ b/tools/binman/etype/fill.py
@@ -22,10 +22,10 @@ class Entry_fill(Entry):
byte value of a region.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def ReadNode(self):
- Entry.ReadNode(self)
+ super().ReadNode()
if self.size is None:
self.Raise("'fill' entry must have a size property")
self.fill_value = fdt_util.GetByte(self._node, 'fill-byte', 0)
diff --git a/tools/binman/etype/fmap.py b/tools/binman/etype/fmap.py
index a43fac38de..3e9b815d11 100644
--- a/tools/binman/etype/fmap.py
+++ b/tools/binman/etype/fmap.py
@@ -32,7 +32,7 @@ class Entry_fmap(Entry):
the sub-entries are ignored.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def _GetFmap(self):
"""Build an FMAP from the entries in the current image
diff --git a/tools/binman/etype/gbb.py b/tools/binman/etype/gbb.py
index dd10599717..41554eba8f 100644
--- a/tools/binman/etype/gbb.py
+++ b/tools/binman/etype/gbb.py
@@ -54,7 +54,7 @@ class Entry_gbb(Entry):
README.chromium for how to obtain the required keys and tools.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.hardware_id, self.keydir, self.bmpblk = self.GetEntryArgsOrProps(
[EntryArg('hardware-id', str),
EntryArg('keydir', str),
--git a/tools/binman/etype/image_header.py b/tools/binman/etype/image_header.py
index 176bdeb29b..2401188495 100644
--- a/tools/binman/etype/image_header.py
+++ b/tools/binman/etype/image_header.py
@@ -57,7 +57,7 @@ class Entry_image_header(Entry):
first/last in the entry list.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.location = fdt_util.GetString(self._node, 'location')
def _GetHeader(self):
@@ -101,7 +101,7 @@ class Entry_image_header(Entry):
else:
offset = image_size - IMAGE_HEADER_LEN
offset += self.section.GetStartOffset()
- return Entry.Pack(self, offset)
+ return super().Pack(offset)
def ProcessContents(self):
"""Write an updated version of the FDT map to this entry
diff --git a/tools/binman/etype/intel_cmc.py b/tools/binman/etype/intel_cmc.py
index 5e6edbe4df..9ab471e7b6 100644
--- a/tools/binman/etype/intel_cmc.py
+++ b/tools/binman/etype/intel_cmc.py
@@ -20,4 +20,4 @@ class Entry_intel_cmc(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/intel_descriptor.py b/tools/binman/etype/intel_descriptor.py
index d4d7a26901..6afc42ece5 100644
--- a/tools/binman/etype/intel_descriptor.py
+++ b/tools/binman/etype/intel_descriptor.py
@@ -45,14 +45,14 @@ class Entry_intel_descriptor(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._regions = []
def Pack(self, offset):
"""Put this entry at the start of the image"""
if self.offset is None:
offset = self.section.GetStartOffset()
- return Entry_blob.Pack(self, offset)
+ return super().Pack(offset)
def GetOffsets(self):
offset = self.data.find(FD_SIGNATURE)
diff --git a/tools/binman/etype/intel_fit.py b/tools/binman/etype/intel_fit.py
index ea482a6125..ad6c1caa85 100644
--- a/tools/binman/etype/intel_fit.py
+++ b/tools/binman/etype/intel_fit.py
@@ -19,11 +19,11 @@ class Entry_intel_fit(Entry_blob):
At present binman only supports a basic FIT with no microcode.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def ReadNode(self):
"""Force 16-byte alignment as required by FIT pointer"""
- Entry_blob.ReadNode(self)
+ super().ReadNode()
self.align = 16
def ObtainContents(self):
diff --git a/tools/binman/etype/intel_fit_ptr.py b/tools/binman/etype/intel_fit_ptr.py
index df118a68f2..a06d12e740 100644
--- a/tools/binman/etype/intel_fit_ptr.py
+++ b/tools/binman/etype/intel_fit_ptr.py
@@ -16,7 +16,7 @@ class Entry_intel_fit_ptr(Entry_blob):
0xffffffc0 in the image.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
if self.HasSibling('intel-fit') is False:
self.Raise("'intel-fit-ptr' section must have an 'intel-fit' sibling")
@@ -38,4 +38,4 @@ class Entry_intel_fit_ptr(Entry_blob):
def Pack(self, offset):
"""Special pack method to set the offset to the right place"""
- return Entry_blob.Pack(self, 0xffffffc0)
+ return super().Pack(0xffffffc0)
diff --git a/tools/binman/etype/intel_fsp.py b/tools/binman/etype/intel_fsp.py
index 7db3d96b43..a1c89adcea 100644
--- a/tools/binman/etype/intel_fsp.py
+++ b/tools/binman/etype/intel_fsp.py
@@ -24,4 +24,4 @@ class Entry_intel_fsp(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/intel_fsp_m.py b/tools/binman/etype/intel_fsp_m.py
index 51b4e7e1ac..4c225b24d3 100644
--- a/tools/binman/etype/intel_fsp_m.py
+++ b/tools/binman/etype/intel_fsp_m.py
@@ -24,4 +24,4 @@ class Entry_intel_fsp_m(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/intel_fsp_s.py b/tools/binman/etype/intel_fsp_s.py
index b3683e476a..9e1107182a 100644
--- a/tools/binman/etype/intel_fsp_s.py
+++ b/tools/binman/etype/intel_fsp_s.py
@@ -24,4 +24,4 @@ class Entry_intel_fsp_s(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/intel_fsp_t.py b/tools/binman/etype/intel_fsp_t.py
index 0f196f0f1c..5dca145a3f 100644
--- a/tools/binman/etype/intel_fsp_t.py
+++ b/tools/binman/etype/intel_fsp_t.py
@@ -23,4 +23,4 @@ class Entry_intel_fsp_t(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/intel_ifwi.py b/tools/binman/etype/intel_ifwi.py
index 6a96f6be55..ba63f6574f 100644
--- a/tools/binman/etype/intel_ifwi.py
+++ b/tools/binman/etype/intel_ifwi.py
@@ -45,13 +45,13 @@ class Entry_intel_ifwi(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._convert_fit = fdt_util.GetBool(self._node, 'convert-fit')
self._ifwi_entries = OrderedDict()
def ReadNode(self):
self._ReadSubnodes()
- Entry_blob.ReadNode(self)
+ super().ReadNode()
def _BuildIfwi(self):
"""Build the contents of the IFWI and write it to the 'data' property"""
diff --git a/tools/binman/etype/intel_me.py b/tools/binman/etype/intel_me.py
index 41c9c6b920..22f61f44d8 100644
--- a/tools/binman/etype/intel_me.py
+++ b/tools/binman/etype/intel_me.py
@@ -27,4 +27,4 @@ class Entry_intel_me(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/intel_mrc.py b/tools/binman/etype/intel_mrc.py
index 854a4dda61..74781848e2 100644
--- a/tools/binman/etype/intel_mrc.py
+++ b/tools/binman/etype/intel_mrc.py
@@ -21,7 +21,7 @@ class Entry_intel_mrc(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'mrc.bin'
diff --git a/tools/binman/etype/intel_refcode.py b/tools/binman/etype/intel_refcode.py
index a1059f787e..5754fec4f8 100644
--- a/tools/binman/etype/intel_refcode.py
+++ b/tools/binman/etype/intel_refcode.py
@@ -21,7 +21,7 @@ class Entry_intel_refcode(Entry_blob):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'refcode.bin'
diff --git a/tools/binman/etype/intel_vbt.py b/tools/binman/etype/intel_vbt.py
index 4d465ad017..f6d7b466ea 100644
--- a/tools/binman/etype/intel_vbt.py
+++ b/tools/binman/etype/intel_vbt.py
@@ -19,4 +19,4 @@ class Entry_intel_vbt(Entry_blob):
See README.x86 for information about Intel binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/intel_vga.py b/tools/binman/etype/intel_vga.py
index 04cd72f3dc..6b87c01b4c 100644
--- a/tools/binman/etype/intel_vga.py
+++ b/tools/binman/etype/intel_vga.py
@@ -22,4 +22,4 @@ class Entry_intel_vga(Entry_blob):
See README.x86 for information about Intel binary blobs.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
diff --git a/tools/binman/etype/mkimage.py b/tools/binman/etype/mkimage.py
index 1aa563963a..8fddc88118 100644
--- a/tools/binman/etype/mkimage.py
+++ b/tools/binman/etype/mkimage.py
@@ -33,7 +33,7 @@ class Entry_mkimage(Entry):
binman.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._args = fdt_util.GetString(self._node, 'args').split(' ')
self._mkimage_entries = OrderedDict()
self._ReadSubnodes()
diff --git a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
index cefd425a5d..e6480f7a15 100644
--- a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
+++ b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
@@ -19,7 +19,7 @@ class Entry_powerpc_mpc85xx_bootpg_resetvec(Entry_blob):
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-br.bin'
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 91b8e0c110..f108121c3a 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -43,7 +43,7 @@ class Entry_section(Entry):
"""
def __init__(self, section, etype, node, test=False):
if not test:
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._entries = OrderedDict()
self._pad_byte = 0
self._sort = False
@@ -52,7 +52,7 @@ class Entry_section(Entry):
def ReadNode(self):
"""Read properties from the image node"""
- Entry.ReadNode(self)
+ super().ReadNode()
self._pad_byte = fdt_util.GetInt(self._node, 'pad-byte', 0)
self._sort = fdt_util.GetBool(self._node, 'sort-by-offset')
self._end_4gb = fdt_util.GetBool(self._node, 'end-at-4gb')
@@ -126,13 +126,13 @@ class Entry_section(Entry):
a section containing a list of files. Process these entries so that
this information is added to the device tree.
"""
- Entry.ExpandEntries(self)
+ super().ExpandEntries()
for entry in self._entries.values():
entry.ExpandEntries()
def AddMissingProperties(self):
"""Add new properties to the device tree as needed for this entry"""
- Entry.AddMissingProperties(self)
+ super().AddMissingProperties()
for entry in self._entries.values():
entry.AddMissingProperties()
@@ -168,14 +168,14 @@ class Entry_section(Entry):
def ResetForPack(self):
"""Reset offset/size fields so that packing can be done again"""
- Entry.ResetForPack(self)
+ super().ResetForPack()
for entry in self._entries.values():
entry.ResetForPack()
def Pack(self, offset):
"""Pack all entries into the section"""
self._PackEntries()
- return Entry.Pack(self, offset)
+ return super().Pack(offset)
def _PackEntries(self):
"""Pack all entries into the image"""
@@ -232,12 +232,12 @@ class Entry_section(Entry):
entry.WriteSymbols(self)
def SetCalculatedProperties(self):
- Entry.SetCalculatedProperties(self)
+ super().SetCalculatedProperties()
for entry in self._entries.values():
entry.SetCalculatedProperties()
def SetImagePos(self, image_pos):
- Entry.SetImagePos(self, image_pos)
+ super().SetImagePos(image_pos)
for entry in self._entries.values():
entry.SetImagePos(image_pos + self.offset)
diff --git a/tools/binman/etype/text.py b/tools/binman/etype/text.py
index 3577135adb..a69c2a4ec4 100644
--- a/tools/binman/etype/text.py
+++ b/tools/binman/etype/text.py
@@ -57,7 +57,7 @@ class Entry_text(Entry):
by setting the size of the entry to something larger than the text.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
value = fdt_util.GetString(self._node, 'text')
if value:
value = tools.ToBytes(value)
diff --git a/tools/binman/etype/u_boot.py b/tools/binman/etype/u_boot.py
index ab1019b00c..4767197e13 100644
--- a/tools/binman/etype/u_boot.py
+++ b/tools/binman/etype/u_boot.py
@@ -26,7 +26,7 @@ class Entry_u_boot(Entry_blob):
in the binman README for more information.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'u-boot.bin'
diff --git a/tools/binman/etype/u_boot_dtb.py b/tools/binman/etype/u_boot_dtb.py
index e98350088f..65e71291d2 100644
--- a/tools/binman/etype/u_boot_dtb.py
+++ b/tools/binman/etype/u_boot_dtb.py
@@ -22,7 +22,7 @@ class Entry_u_boot_dtb(Entry_blob_dtb):
binman to know which entries contain a device tree.
"""
def __init__(self, section, etype, node):
- Entry_blob_dtb.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'u-boot.dtb'
diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py
index aec145533e..66a9db55ca 100644
--- a/tools/binman/etype/u_boot_dtb_with_ucode.py
+++ b/tools/binman/etype/u_boot_dtb_with_ucode.py
@@ -28,7 +28,7 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob_dtb):
global state
from binman import state
- Entry_blob_dtb.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.ucode_data = b''
self.collate = False
self.ucode_offset = None
@@ -78,7 +78,7 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob_dtb):
def ObtainContents(self):
# Call the base class just in case it does something important.
- Entry_blob_dtb.ObtainContents(self)
+ super().ObtainContents()
if self.ucode and not self.collate:
for node in self.ucode.subnodes:
data_prop = node.props.get('data')
diff --git a/tools/binman/etype/u_boot_elf.py b/tools/binman/etype/u_boot_elf.py
index 5f906e520c..6614a75faf 100644
--- a/tools/binman/etype/u_boot_elf.py
+++ b/tools/binman/etype/u_boot_elf.py
@@ -21,7 +21,7 @@ class Entry_u_boot_elf(Entry_blob):
relocated to any address for execution.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self._strip = fdt_util.GetBool(self._node, 'strip')
def ReadBlobContents(self):
@@ -31,7 +31,7 @@ class Entry_u_boot_elf(Entry_blob):
tools.WriteFile(out_fname, tools.ReadFile(self._pathname))
tools.Run('strip', out_fname)
self._pathname = out_fname
- Entry_blob.ReadBlobContents(self)
+ super().ReadBlobContents()
return True
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_img.py b/tools/binman/etype/u_boot_img.py
index 50cc71d3ce..8a739d8edb 100644
--- a/tools/binman/etype/u_boot_img.py
+++ b/tools/binman/etype/u_boot_img.py
@@ -21,7 +21,7 @@ class Entry_u_boot_img(Entry_blob):
applications.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'u-boot.img'
diff --git a/tools/binman/etype/u_boot_nodtb.py b/tools/binman/etype/u_boot_nodtb.py
index e8c0e1a1d6..e84df490f6 100644
--- a/tools/binman/etype/u_boot_nodtb.py
+++ b/tools/binman/etype/u_boot_nodtb.py
@@ -21,7 +21,7 @@ class Entry_u_boot_nodtb(Entry_blob):
U-Boot and the device tree).
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-nodtb.bin'
diff --git a/tools/binman/etype/u_boot_spl.py b/tools/binman/etype/u_boot_spl.py
index a6fddbe8f1..d66e46140b 100644
--- a/tools/binman/etype/u_boot_spl.py
+++ b/tools/binman/etype/u_boot_spl.py
@@ -32,7 +32,7 @@ class Entry_u_boot_spl(Entry_blob):
binman uses that to look up symbols to write into the SPL binary.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.elf_fname = 'spl/u-boot-spl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_spl_bss_pad.py b/tools/binman/etype/u_boot_spl_bss_pad.py
index a6a177a128..596b2bed97 100644
--- a/tools/binman/etype/u_boot_spl_bss_pad.py
+++ b/tools/binman/etype/u_boot_spl_bss_pad.py
@@ -31,7 +31,7 @@ class Entry_u_boot_spl_bss_pad(Entry_blob):
binman uses that to look up the BSS address.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def ObtainContents(self):
fname = tools.GetInputFilename('spl/u-boot-spl')
diff --git a/tools/binman/etype/u_boot_spl_dtb.py b/tools/binman/etype/u_boot_spl_dtb.py
index a0761eeacd..eefc4a44aa 100644
--- a/tools/binman/etype/u_boot_spl_dtb.py
+++ b/tools/binman/etype/u_boot_spl_dtb.py
@@ -19,7 +19,7 @@ class Entry_u_boot_spl_dtb(Entry_blob_dtb):
to activate.
"""
def __init__(self, section, etype, node):
- Entry_blob_dtb.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-spl.dtb'
diff --git a/tools/binman/etype/u_boot_spl_elf.py b/tools/binman/etype/u_boot_spl_elf.py
index f99f74abab..7f1236bcbb 100644
--- a/tools/binman/etype/u_boot_spl_elf.py
+++ b/tools/binman/etype/u_boot_spl_elf.py
@@ -18,7 +18,7 @@ class Entry_u_boot_spl_elf(Entry_blob):
be relocated to any address for execution.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-spl'
diff --git a/tools/binman/etype/u_boot_spl_nodtb.py b/tools/binman/etype/u_boot_spl_nodtb.py
index 072b915ff3..6f4529396d 100644
--- a/tools/binman/etype/u_boot_spl_nodtb.py
+++ b/tools/binman/etype/u_boot_spl_nodtb.py
@@ -22,7 +22,7 @@ class Entry_u_boot_spl_nodtb(Entry_blob):
both SPL and the device tree).
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-spl-nodtb.bin'
diff --git a/tools/binman/etype/u_boot_spl_with_ucode_ptr.py b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
index b1543a5ef3..72739a5eb6 100644
--- a/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
@@ -18,7 +18,7 @@ class Entry_u_boot_spl_with_ucode_ptr(Entry_u_boot_with_ucode_ptr):
process.
"""
def __init__(self, section, etype, node):
- Entry_u_boot_with_ucode_ptr.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.elf_fname = 'spl/u-boot-spl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_tpl.py b/tools/binman/etype/u_boot_tpl.py
index 6562457c9a..02287ab327 100644
--- a/tools/binman/etype/u_boot_tpl.py
+++ b/tools/binman/etype/u_boot_tpl.py
@@ -32,7 +32,7 @@ class Entry_u_boot_tpl(Entry_blob):
binman uses that to look up symbols to write into the TPL binary.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.elf_fname = 'tpl/u-boot-tpl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_tpl_dtb.py b/tools/binman/etype/u_boot_tpl_dtb.py
index 890155f271..2ff1d7ced1 100644
--- a/tools/binman/etype/u_boot_tpl_dtb.py
+++ b/tools/binman/etype/u_boot_tpl_dtb.py
@@ -19,7 +19,7 @@ class Entry_u_boot_tpl_dtb(Entry_blob_dtb):
to activate.
"""
def __init__(self, section, etype, node):
- Entry_blob_dtb.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-tpl.dtb'
diff --git a/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py b/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py
index ca1bf85ace..066f18dfef 100644
--- a/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py
+++ b/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py
@@ -16,7 +16,7 @@ class Entry_u_boot_tpl_dtb_with_ucode(Entry_u_boot_dtb_with_ucode):
process.
"""
def __init__(self, section, etype, node):
- Entry_u_boot_dtb_with_ucode.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-tpl.dtb'
diff --git a/tools/binman/etype/u_boot_tpl_elf.py b/tools/binman/etype/u_boot_tpl_elf.py
index 7fa8e96364..3f24d3aa7b 100644
--- a/tools/binman/etype/u_boot_tpl_elf.py
+++ b/tools/binman/etype/u_boot_tpl_elf.py
@@ -18,7 +18,7 @@ class Entry_u_boot_tpl_elf(Entry_blob):
be relocated to any address for execution.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-tpl'
diff --git a/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py b/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py
index 7f7fab7105..c7f3f9dedb 100644
--- a/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py
@@ -20,7 +20,7 @@ class Entry_u_boot_tpl_with_ucode_ptr(Entry_u_boot_with_ucode_ptr):
process.
"""
def __init__(self, section, etype, node):
- Entry_u_boot_with_ucode_ptr.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.elf_fname = 'tpl/u-boot-tpl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_ucode.py b/tools/binman/etype/u_boot_ucode.py
index d9e1a605ef..4462293618 100644
--- a/tools/binman/etype/u_boot_ucode.py
+++ b/tools/binman/etype/u_boot_ucode.py
@@ -58,7 +58,7 @@ class Entry_u_boot_ucode(Entry_blob):
contents of this entry.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def ObtainContents(self):
# If the section does not need microcode, there is nothing to do
diff --git a/tools/binman/etype/u_boot_with_ucode_ptr.py b/tools/binman/etype/u_boot_with_ucode_ptr.py
index 06047b654d..92d2fc6853 100644
--- a/tools/binman/etype/u_boot_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_with_ucode_ptr.py
@@ -29,7 +29,7 @@ class Entry_u_boot_with_ucode_ptr(Entry_blob):
complicated. Otherwise it is the same as the u_boot entry.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.elf_fname = 'u-boot'
self.target_offset = None
diff --git a/tools/binman/etype/vblock.py b/tools/binman/etype/vblock.py
index 5753de7ec7..f734fbaec4 100644
--- a/tools/binman/etype/vblock.py
+++ b/tools/binman/etype/vblock.py
@@ -36,7 +36,7 @@ class Entry_vblock(Entry):
and kernel are genuine.
"""
def __init__(self, section, etype, node):
- Entry.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
self.content = fdt_util.GetPhandleList(self._node, 'content')
if not self.content:
self.Raise("Vblock must have a 'content' property")
diff --git a/tools/binman/etype/x86_reset16.py b/tools/binman/etype/x86_reset16.py
index ad864e5442..5d49f16e21 100644
--- a/tools/binman/etype/x86_reset16.py
+++ b/tools/binman/etype/x86_reset16.py
@@ -23,7 +23,7 @@ class Entry_x86_reset16(Entry_blob):
For 64-bit U-Boot, the 'x86_reset16_spl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-x86-reset16.bin'
diff --git a/tools/binman/etype/x86_reset16_spl.py b/tools/binman/etype/x86_reset16_spl.py
index 9a663f0ae2..775b90699b 100644
--- a/tools/binman/etype/x86_reset16_spl.py
+++ b/tools/binman/etype/x86_reset16_spl.py
@@ -23,7 +23,7 @@ class Entry_x86_reset16_spl(Entry_blob):
For 32-bit U-Boot, the 'x86_reset_spl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-x86-reset16-spl.bin'
diff --git a/tools/binman/etype/x86_reset16_tpl.py b/tools/binman/etype/x86_reset16_tpl.py
index 864508f367..52d3f4869a 100644
--- a/tools/binman/etype/x86_reset16_tpl.py
+++ b/tools/binman/etype/x86_reset16_tpl.py
@@ -23,7 +23,7 @@ class Entry_x86_reset16_tpl(Entry_blob):
For 32-bit U-Boot, the 'x86_reset_tpl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-x86-reset16-tpl.bin'
diff --git a/tools/binman/etype/x86_start16.py b/tools/binman/etype/x86_start16.py
index d8345f6722..18fdd95d37 100644
--- a/tools/binman/etype/x86_start16.py
+++ b/tools/binman/etype/x86_start16.py
@@ -25,7 +25,7 @@ class Entry_x86_start16(Entry_blob):
For 64-bit U-Boot, the 'x86_start16_spl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-x86-start16.bin'
diff --git a/tools/binman/etype/x86_start16_spl.py b/tools/binman/etype/x86_start16_spl.py
index ad520d3c6d..ac8e90f2e0 100644
--- a/tools/binman/etype/x86_start16_spl.py
+++ b/tools/binman/etype/x86_start16_spl.py
@@ -25,7 +25,7 @@ class Entry_x86_start16_spl(Entry_blob):
For 32-bit U-Boot, the 'x86-start16' entry type is used instead.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-x86-start16-spl.bin'
diff --git a/tools/binman/etype/x86_start16_tpl.py b/tools/binman/etype/x86_start16_tpl.py
index ccc8727d1d..72d4608bb7 100644
--- a/tools/binman/etype/x86_start16_tpl.py
+++ b/tools/binman/etype/x86_start16_tpl.py
@@ -26,7 +26,7 @@ class Entry_x86_start16_tpl(Entry_blob):
may be used instead.
"""
def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
+ super().__init__(section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-x86-start16-tpl.bin'
diff --git a/tools/binman/image.py b/tools/binman/image.py
index 523b274c31..a8772c3763 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -45,7 +45,7 @@ class Image(section.Entry_section):
we create a section manually.
"""
def __init__(self, name, node, copy_to_orig=True, test=False):
- section.Entry_section.__init__(self, None, 'section', node, test=test)
+ super().__init__(None, 'section', node, test=test)
self.copy_to_orig = copy_to_orig
self.name = 'main-section'
self.image_name = name
@@ -57,7 +57,7 @@ class Image(section.Entry_section):
self.ReadNode()
def ReadNode(self):
- section.Entry_section.ReadNode(self)
+ super().ReadNode()
filename = fdt_util.GetString(self._node, 'filename')
if filename:
self._filename = filename
@@ -116,11 +116,11 @@ class Image(section.Entry_section):
def PackEntries(self):
"""Pack all entries into the image"""
- section.Entry_section.Pack(self, 0)
+ super().Pack(0)
def SetImagePos(self):
# This first section in the image so it starts at 0
- section.Entry_section.SetImagePos(self, 0)
+ super().SetImagePos(0)
def ProcessEntryContents(self):
"""Call the ProcessContents() method for each entry
@@ -139,7 +139,7 @@ class Image(section.Entry_section):
def WriteSymbols(self):
"""Write symbol values into binary files for access at run time"""
- section.Entry_section.WriteSymbols(self, self)
+ super().WriteSymbols(self)
def BuildImage(self):
"""Write the image to a file"""
@@ -161,7 +161,7 @@ class Image(section.Entry_section):
with open(fname, 'w') as fd:
print('%8s %8s %8s %s' % ('ImagePos', 'Offset', 'Size', 'Name'),
file=fd)
- section.Entry_section.WriteMap(self, fd, 0)
+ super().WriteMap(fd, 0)
return fname
def BuildEntryList(self):
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 12/49] binman: Add an etype for external binary blobs
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (10 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 11/49] binman: Use super() instead of specifying parent type Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext Simon Glass
` (36 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
It is useful to be able to distinguish between ordinary blobs such as
u-boot.bin and external blobs that cannot be build by the U-Boot build
system. If the external blobs are not available for some reason, then we
know that a value image cannot be built.
Introduce a new 'blob-ext' entry type for that.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/README.entries | 10 +++++++
tools/binman/etype/blob_ext.py | 31 ++++++++++++++++++++++
tools/binman/ftest.py | 12 +++++++++
tools/binman/test/157_blob_ext.dts | 14 ++++++++++
tools/binman/test/158_blob_ext_missing.dts | 16 +++++++++++
5 files changed, 83 insertions(+)
create mode 100644 tools/binman/etype/blob_ext.py
create mode 100644 tools/binman/test/157_blob_ext.dts
create mode 100644 tools/binman/test/158_blob_ext_missing.dts
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index d5b4b3af2b..ec0d47f8e3 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -42,6 +42,16 @@ obtained from the list of available device-tree files, managed by the
+Entry: blob-ext: Entry containing an externally built binary blob
+-----------------------------------------------------------------
+
+Note: This should not be used by itself. It is normally used as a parent
+class by other entry types.
+
+See 'blob' for Properties / Entry arguments.
+
+
+
Entry: blob-named-by-arg: A blob entry which gets its filename property from its subclass
-----------------------------------------------------------------------------------------
diff --git a/tools/binman/etype/blob_ext.py b/tools/binman/etype/blob_ext.py
new file mode 100644
index 0000000000..cc8d91bb59
--- /dev/null
+++ b/tools/binman/etype/blob_ext.py
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for external blobs, not built by U-Boot
+#
+
+import os
+
+from binman.etype.blob import Entry_blob
+from dtoc import fdt_util
+from patman import tools
+from patman import tout
+
+class Entry_blob_ext(Entry_blob):
+ """Entry containing an externally built binary blob
+
+ Note: This should not be used by itself. It is normally used as a parent
+ class by other entry types.
+
+ See 'blob' for Properties / Entry arguments.
+ """
+ def __init__(self, section, etype, node):
+ Entry_blob.__init__(self, section, etype, node)
+ self.external = True
+
+ def ObtainContents(self):
+ self._filename = self.GetDefaultFilename()
+ self._pathname = tools.GetInputFilename(self._filename)
+ self.ReadBlobContents()
+ return True
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 39e67b9042..f8d5191672 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -3364,6 +3364,18 @@ class TestFunctional(unittest.TestCase):
# Just check that the data appears in the file somewhere
self.assertIn(U_BOOT_SPL_DATA, data)
+ def testExtblob(self):
+ """Test an image with an external blob"""
+ data = self._DoReadFile('157_blob_ext.dts')
+ self.assertEqual(REFCODE_DATA, data)
+
+ def testExtblobMissing(self):
+ """Test an image with a missing external blob"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('158_blob_ext_missing.dts')
+ self.assertIn("Filename 'missing-file' not found in input path",
+ str(e.exception))
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/157_blob_ext.dts b/tools/binman/test/157_blob_ext.dts
new file mode 100644
index 0000000000..8afdd5339e
--- /dev/null
+++ b/tools/binman/test/157_blob_ext.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ blob-ext {
+ filename = "refcode.bin";
+ };
+ };
+};
diff --git a/tools/binman/test/158_blob_ext_missing.dts b/tools/binman/test/158_blob_ext_missing.dts
new file mode 100644
index 0000000000..d315e5592e
--- /dev/null
+++ b/tools/binman/test/158_blob_ext_missing.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <0x80>;
+
+ blob-ext {
+ filename = "missing-file";
+ };
+ };
+};
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (11 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 12/49] binman: Add an etype for external binary blobs Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 14/49] binman: Allow external binaries to be missing Simon Glass
` (35 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Many of the existing blobs rely on external binaries which may not be
available. Move them over to use blob_ext to indicate this.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/etype/cros_ec_rw.py | 1 +
tools/binman/etype/intel_cmc.py | 5 ++---
tools/binman/etype/intel_descriptor.py | 4 ++--
tools/binman/etype/intel_fit.py | 4 ++--
tools/binman/etype/intel_fit_ptr.py | 4 ++--
tools/binman/etype/intel_fsp.py | 5 ++---
tools/binman/etype/intel_fsp_m.py | 5 ++---
tools/binman/etype/intel_fsp_s.py | 5 ++---
tools/binman/etype/intel_fsp_t.py | 5 ++---
tools/binman/etype/intel_ifwi.py | 4 ++--
tools/binman/etype/intel_me.py | 5 ++---
tools/binman/etype/intel_mrc.py | 5 ++---
tools/binman/etype/intel_refcode.py | 5 ++---
tools/binman/etype/intel_vbt.py | 5 ++---
tools/binman/etype/intel_vga.py | 5 ++---
tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py | 1 -
16 files changed, 29 insertions(+), 39 deletions(-)
diff --git a/tools/binman/etype/cros_ec_rw.py b/tools/binman/etype/cros_ec_rw.py
index 7ad62d0265..741372e1af 100644
--- a/tools/binman/etype/cros_ec_rw.py
+++ b/tools/binman/etype/cros_ec_rw.py
@@ -19,3 +19,4 @@ class Entry_cros_ec_rw(Entry_blob_named_by_arg):
"""
def __init__(self, section, etype, node):
super().__init__(section, etype, node, 'cros-ec-rw')
+ self.external = True
diff --git a/tools/binman/etype/intel_cmc.py b/tools/binman/etype/intel_cmc.py
index 9ab471e7b6..644fa421d3 100644
--- a/tools/binman/etype/intel_cmc.py
+++ b/tools/binman/etype/intel_cmc.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Chip Microcode binary blob
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_cmc(Entry_blob):
+class Entry_intel_cmc(Entry_blob_ext):
"""Entry containing an Intel Chipset Micro Code (CMC) file
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_descriptor.py b/tools/binman/etype/intel_descriptor.py
index 6afc42ece5..5b18893ccd 100644
--- a/tools/binman/etype/intel_descriptor.py
+++ b/tools/binman/etype/intel_descriptor.py
@@ -8,7 +8,7 @@
import struct
from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
FD_SIGNATURE = struct.pack('<L', 0x0ff0a55a)
MAX_REGIONS = 5
@@ -25,7 +25,7 @@ class Region:
self.limit = ((val & 0x0fff0000) >> 4) | 0xfff
self.size = self.limit - self.base + 1
-class Entry_intel_descriptor(Entry_blob):
+class Entry_intel_descriptor(Entry_blob_ext):
"""Intel flash descriptor block (4KB)
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_fit.py b/tools/binman/etype/intel_fit.py
index ad6c1caa85..f1a10c55a6 100644
--- a/tools/binman/etype/intel_fit.py
+++ b/tools/binman/etype/intel_fit.py
@@ -7,9 +7,9 @@
import struct
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_fit(Entry_blob):
+class Entry_intel_fit(Entry_blob_ext):
"""Intel Firmware Image Table (FIT)
This entry contains a dummy FIT as required by recent Intel CPUs. The FIT
diff --git a/tools/binman/etype/intel_fit_ptr.py b/tools/binman/etype/intel_fit_ptr.py
index a06d12e740..01f082281c 100644
--- a/tools/binman/etype/intel_fit_ptr.py
+++ b/tools/binman/etype/intel_fit_ptr.py
@@ -7,9 +7,9 @@
import struct
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_fit_ptr(Entry_blob):
+class Entry_intel_fit_ptr(Entry_blob_ext):
"""Intel Firmware Image Table (FIT) pointer
This entry contains a pointer to the FIT. It is required to be at address
diff --git a/tools/binman/etype/intel_fsp.py b/tools/binman/etype/intel_fsp.py
index a1c89adcea..2ac012bce1 100644
--- a/tools/binman/etype/intel_fsp.py
+++ b/tools/binman/etype/intel_fsp.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Firmware Support Package binary blob
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_fsp(Entry_blob):
+class Entry_intel_fsp(Entry_blob_ext):
"""Entry containing an Intel Firmware Support Package (FSP) file
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_fsp_m.py b/tools/binman/etype/intel_fsp_m.py
index 4c225b24d3..434b0f1856 100644
--- a/tools/binman/etype/intel_fsp_m.py
+++ b/tools/binman/etype/intel_fsp_m.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Firmware Support Package binary blob (M section)
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_fsp_m(Entry_blob):
+class Entry_intel_fsp_m(Entry_blob_ext):
"""Entry containing Intel Firmware Support Package (FSP) memory init
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_fsp_s.py b/tools/binman/etype/intel_fsp_s.py
index 9e1107182a..564e1228bb 100644
--- a/tools/binman/etype/intel_fsp_s.py
+++ b/tools/binman/etype/intel_fsp_s.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Firmware Support Package binary blob (S section)
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_fsp_s(Entry_blob):
+class Entry_intel_fsp_s(Entry_blob_ext):
"""Entry containing Intel Firmware Support Package (FSP) silicon init
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_fsp_t.py b/tools/binman/etype/intel_fsp_t.py
index 5dca145a3f..df0c5fbee0 100644
--- a/tools/binman/etype/intel_fsp_t.py
+++ b/tools/binman/etype/intel_fsp_t.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Firmware Support Package binary blob (T section)
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_fsp_t(Entry_blob):
+class Entry_intel_fsp_t(Entry_blob_ext):
"""Entry containing Intel Firmware Support Package (FSP) temp ram init
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_ifwi.py b/tools/binman/etype/intel_ifwi.py
index ba63f6574f..b0c2b1aaa3 100644
--- a/tools/binman/etype/intel_ifwi.py
+++ b/tools/binman/etype/intel_ifwi.py
@@ -8,11 +8,11 @@
from collections import OrderedDict
from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
from dtoc import fdt_util
from patman import tools
-class Entry_intel_ifwi(Entry_blob):
+class Entry_intel_ifwi(Entry_blob_ext):
"""Entry containing an Intel Integrated Firmware Image (IFWI) file
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_me.py b/tools/binman/etype/intel_me.py
index 22f61f44d8..a55b159485 100644
--- a/tools/binman/etype/intel_me.py
+++ b/tools/binman/etype/intel_me.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Management Engine binary blob
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_me(Entry_blob):
+class Entry_intel_me(Entry_blob_ext):
"""Entry containing an Intel Management Engine (ME) file
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_mrc.py b/tools/binman/etype/intel_mrc.py
index 74781848e2..ccbb046519 100644
--- a/tools/binman/etype/intel_mrc.py
+++ b/tools/binman/etype/intel_mrc.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Memory Reference Code binary blob
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_mrc(Entry_blob):
+class Entry_intel_mrc(Entry_blob_ext):
"""Entry containing an Intel Memory Reference Code (MRC) file
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_refcode.py b/tools/binman/etype/intel_refcode.py
index 5754fec4f8..5ead08b2be 100644
--- a/tools/binman/etype/intel_refcode.py
+++ b/tools/binman/etype/intel_refcode.py
@@ -5,10 +5,9 @@
# Entry-type module for Intel Memory Reference Code binary blob
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_refcode(Entry_blob):
+class Entry_intel_refcode(Entry_blob_ext):
"""Entry containing an Intel Reference Code file
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_vbt.py b/tools/binman/etype/intel_vbt.py
index f6d7b466ea..2a98c12368 100644
--- a/tools/binman/etype/intel_vbt.py
+++ b/tools/binman/etype/intel_vbt.py
@@ -4,10 +4,9 @@
# Entry-type module for Intel Video BIOS Table binary blob
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_vbt(Entry_blob):
+class Entry_intel_vbt(Entry_blob_ext):
"""Entry containing an Intel Video BIOS Table (VBT) file
Properties / Entry arguments:
diff --git a/tools/binman/etype/intel_vga.py b/tools/binman/etype/intel_vga.py
index 6b87c01b4c..a103f1ce0e 100644
--- a/tools/binman/etype/intel_vga.py
+++ b/tools/binman/etype/intel_vga.py
@@ -5,10 +5,9 @@
# Entry-type module for x86 VGA ROM binary blob
#
-from binman.entry import Entry
-from binman.etype.blob import Entry_blob
+from binman.etype.blob_ext import Entry_blob_ext
-class Entry_intel_vga(Entry_blob):
+class Entry_intel_vga(Entry_blob_ext):
"""Entry containing an Intel Video Graphics Adaptor (VGA) file
Properties / Entry arguments:
diff --git a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
index e6480f7a15..4276df2b55 100644
--- a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
+++ b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
@@ -4,7 +4,6 @@
# Entry-type module for the PowerPC mpc85xx bootpg and resetvec code for U-Boot
#
-from binman.entry import Entry
from binman.etype.blob import Entry_blob
class Entry_powerpc_mpc85xx_bootpg_resetvec(Entry_blob):
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 14/49] binman: Allow external binaries to be missing
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (12 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 15/49] patman: Update errors and warnings to use stderr Simon Glass
` (34 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Sometimes it is useful to build an image even though external binaries are
not present. This allows the build system to continue to function without
these files, albeit not producing valid images.
U-Boot does with with ATF (ARM Trusted Firmware) today.
Add a new flag to binman to request this behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/README.entries | 3 +++
tools/binman/cmdline.py | 2 ++
tools/binman/control.py | 7 +++++--
tools/binman/etype/blob_ext.py | 13 ++++++++++---
tools/binman/etype/section.py | 17 +++++++++++++++++
tools/binman/ftest.py | 8 +++++++-
tools/patman/tools.py | 8 ++++++--
7 files changed, 50 insertions(+), 8 deletions(-)
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index ec0d47f8e3..e88fd846db 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -48,6 +48,9 @@ Entry: blob-ext: Entry containing an externally built binary blob
Note: This should not be used by itself. It is normally used as a parent
class by other entry types.
+If the file providing this blob is missing, binman can optionally ignore it
+and produce a broken image with a warning.
+
See 'blob' for Properties / Entry arguments.
diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py
index 1e38593579..bb4d9d1288 100644
--- a/tools/binman/cmdline.py
+++ b/tools/binman/cmdline.py
@@ -53,6 +53,8 @@ controlled by a description in the board device tree.'''
help='Add a path to the list of directories to use for input files')
build_parser.add_argument('-m', '--map', action='store_true',
default=False, help='Output a map file for each image')
+ build_parser.add_argument('-M', '--allow-missing', action='store_true',
+ default=False, help='Allow external blobs to be missing')
build_parser.add_argument('-O', '--outdir', type=str,
action='store', help='Path to directory to use for intermediate and '
'output files')
diff --git a/tools/binman/control.py b/tools/binman/control.py
index dc1dd2a7dc..8c6eae83f1 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -387,7 +387,7 @@ def PrepareImagesAndDtbs(dtb_fname, select_images, update_fdt):
def ProcessImage(image, update_fdt, write_map, get_contents=True,
- allow_resize=True):
+ allow_resize=True, allow_missing=False):
"""Perform all steps for this image, including checking and # writing it.
This means that errors found with a later image will be reported after
@@ -402,8 +402,10 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True,
the contents is already present
allow_resize: True to allow entries to change size (this does a re-pack
of the entries), False to raise an exception
+ allow_missing: Allow blob_ext objects to be missing
"""
if get_contents:
+ image.SetAllowMissing(allow_missing)
image.GetEntryContents()
image.GetEntryOffsets()
@@ -523,7 +525,8 @@ def Binman(args):
images = PrepareImagesAndDtbs(dtb_fname, args.image,
args.update_fdt)
for image in images.values():
- ProcessImage(image, args.update_fdt, args.map)
+ ProcessImage(image, args.update_fdt, args.map,
+ allow_missing=args.allow_missing)
# Write the updated FDTs to our output files
for dtb_item in state.GetAllFdts():
diff --git a/tools/binman/etype/blob_ext.py b/tools/binman/etype/blob_ext.py
index cc8d91bb59..51779c88c9 100644
--- a/tools/binman/etype/blob_ext.py
+++ b/tools/binman/etype/blob_ext.py
@@ -18,6 +18,9 @@ class Entry_blob_ext(Entry_blob):
Note: This should not be used by itself. It is normally used as a parent
class by other entry types.
+ If the file providing this blob is missing, binman can optionally ignore it
+ and produce a broken image with a warning.
+
See 'blob' for Properties / Entry arguments.
"""
def __init__(self, section, etype, node):
@@ -26,6 +29,10 @@ class Entry_blob_ext(Entry_blob):
def ObtainContents(self):
self._filename = self.GetDefaultFilename()
- self._pathname = tools.GetInputFilename(self._filename)
- self.ReadBlobContents()
- return True
+ self._pathname = tools.GetInputFilename(self._filename,
+ self.section.GetAllowMissing())
+ # Allow the file to be missing
+ if not self._pathname:
+ self.SetContents(b'')
+ return True
+ return super().ObtainContents()
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index f108121c3a..44b13b2575 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -49,6 +49,7 @@ class Entry_section(Entry):
self._sort = False
self._skip_at_start = None
self._end_4gb = False
+ self._allow_missing = False
def ReadNode(self):
"""Read properties from the image node"""
@@ -535,3 +536,19 @@ class Entry_section(Entry):
def WriteChildData(self, child):
return True
+
+ def SetAllowMissing(self, allow_missing):
+ """Set whether a section allows missing external blobs
+
+ Args:
+ allow_missing: True if allowed, False if not allowed
+ """
+ self._allow_missing = allow_missing
+
+ def GetAllowMissing(self):
+ """Get whether a section allows missing external blobs
+
+ Returns:
+ True if allowed, False if not allowed
+ """
+ return self._allow_missing
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index f8d5191672..7c8b3eb3a0 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -285,7 +285,7 @@ class TestFunctional(unittest.TestCase):
def _DoTestFile(self, fname, debug=False, map=False, update_dtb=False,
entry_args=None, images=None, use_real_dtb=False,
- verbosity=None):
+ verbosity=None, allow_missing=False):
"""Run binman with a given test file
Args:
@@ -319,6 +319,8 @@ class TestFunctional(unittest.TestCase):
if entry_args:
for arg, value in entry_args.items():
args.append('-a%s=%s' % (arg, value))
+ if allow_missing:
+ args.append('-M')
if images:
for image in images:
args += ['-i', image]
@@ -3376,6 +3378,10 @@ class TestFunctional(unittest.TestCase):
self.assertIn("Filename 'missing-file' not found in input path",
str(e.exception))
+ def testExtblobMissingOk(self):
+ """Test an image with an missing external blob that is allowed"""
+ self._DoTestFile('158_blob_ext_missing.dts', allow_missing=True)
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/patman/tools.py b/tools/patman/tools.py
index b50370dfe8..7d92e20afa 100644
--- a/tools/patman/tools.py
+++ b/tools/patman/tools.py
@@ -114,14 +114,16 @@ def SetInputDirs(dirname):
indir = dirname
tout.Debug("Using input directories %s" % indir)
-def GetInputFilename(fname):
+def GetInputFilename(fname, allow_missing=False):
"""Return a filename for use as input.
Args:
fname: Filename to use for new file
+ allow_missing: True if the filename can be missing
Returns:
- The full path of the filename, within the input directory
+ The full path of the filename, within the input directory, or
+ None on error
"""
if not indir or fname[:1] == '/':
return fname
@@ -130,6 +132,8 @@ def GetInputFilename(fname):
if os.path.exists(pathname):
return pathname
+ if allow_missing:
+ return None
raise ValueError("Filename '%s' not found in input path (%s) (cwd='%s')" %
(fname, ','.join(indir), os.getcwd()))
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 15/49] patman: Update errors and warnings to use stderr
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (13 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 14/49] binman: Allow external binaries to be missing Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 16/49] binman: Detect when valid images are not produced Simon Glass
` (33 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
When warnings and errors are produced by tools they should be written to
stderr. Update the tout implementation to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/ftest.py | 2 +-
tools/patman/tout.py | 5 ++++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 7c8b3eb3a0..928d3608a3 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -3232,7 +3232,7 @@ class TestFunctional(unittest.TestCase):
with test_util.capture_sys_output() as (stdout, stderr):
control.ReplaceEntries(updated_fname, None, outdir, [])
self.assertIn("Skipping entry '/u-boot' from missing file",
- stdout.getvalue())
+ stderr.getvalue())
def testReplaceCmdMap(self):
"""Test replacing a file fron an image on the command line"""
diff --git a/tools/patman/tout.py b/tools/patman/tout.py
index c7e3272096..91a53f4073 100644
--- a/tools/patman/tout.py
+++ b/tools/patman/tout.py
@@ -83,7 +83,10 @@ def _Output(level, msg, color=None):
ClearProgress()
if color:
msg = _color.Color(color, msg)
- print(msg)
+ if level < NOTICE:
+ print(msg, file=sys.stderr)
+ else:
+ print(msg)
def DoOutput(level, msg):
"""Output a message to the terminal.
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 16/49] binman: Detect when valid images are not produced
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (14 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 15/49] patman: Update errors and warnings to use stderr Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 17/49] binman: Allow missing Intel blobs Simon Glass
` (32 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
When external blobs are missing, show a message indicating that the images
are not functional.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/control.py | 16 +++++++++++--
tools/binman/entry.py | 21 +++++++++++++++++
tools/binman/etype/blob_ext.py | 1 +
tools/binman/etype/section.py | 16 ++++++++++++-
tools/binman/ftest.py | 14 ++++++++++-
.../binman/test/159_blob_ext_missing_sect.dts | 23 +++++++++++++++++++
tools/patman/tout.py | 1 +
7 files changed, 88 insertions(+), 4 deletions(-)
create mode 100644 tools/binman/test/159_blob_ext_missing_sect.dts
diff --git a/tools/binman/control.py b/tools/binman/control.py
index 8c6eae83f1..343b0a0c35 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -403,6 +403,9 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True,
allow_resize: True to allow entries to change size (this does a re-pack
of the entries), False to raise an exception
allow_missing: Allow blob_ext objects to be missing
+
+ Returns:
+ True if one or more external blobs are missing, False if all are present
"""
if get_contents:
image.SetAllowMissing(allow_missing)
@@ -450,6 +453,12 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True,
image.BuildImage()
if write_map:
image.WriteMap()
+ missing_list = []
+ image.CheckMissing(missing_list)
+ if missing_list:
+ tout.Warning("Image '%s' is missing external blobs and is non-functional: %s" %
+ (image.name, ' '.join([e.name for e in missing_list])))
+ return bool(missing_list)
def Binman(args):
@@ -524,14 +533,17 @@ def Binman(args):
images = PrepareImagesAndDtbs(dtb_fname, args.image,
args.update_fdt)
+ missing = False
for image in images.values():
- ProcessImage(image, args.update_fdt, args.map,
- allow_missing=args.allow_missing)
+ missing |= ProcessImage(image, args.update_fdt, args.map,
+ allow_missing=args.allow_missing)
# Write the updated FDTs to our output files
for dtb_item in state.GetAllFdts():
tools.WriteFile(dtb_item._fname, dtb_item.GetContents())
+ if missing:
+ tout.Warning("Some images are invalid")
finally:
tools.FinaliseOutputDir()
finally:
diff --git a/tools/binman/entry.py b/tools/binman/entry.py
index 90ffd27617..4a42e0bf34 100644
--- a/tools/binman/entry.py
+++ b/tools/binman/entry.py
@@ -84,6 +84,7 @@ class Entry(object):
self.image_pos = None
self._expand_size = False
self.compress = 'none'
+ self.missing = False
@staticmethod
def Lookup(node_path, etype):
@@ -794,3 +795,23 @@ features to produce new behaviours.
elif self == entries[-1]:
return 'end'
return 'middle'
+
+ def SetAllowMissing(self, allow_missing):
+ """Set whether a section allows missing external blobs
+
+ Args:
+ allow_missing: True if allowed, False if not allowed
+ """
+ # This is meaningless for
+ self._allow_missing = allow_missing
+
+ def CheckMissing(self, missing_list):
+ """Check if any entries in this section have missing external blobs
+
+ If there are missing blobs, the entries are added to the list
+
+ Args:
+ missing_list: List of Entry objects to be added to
+ """
+ if self.missing:
+ missing_list.append(self)
diff --git a/tools/binman/etype/blob_ext.py b/tools/binman/etype/blob_ext.py
index 51779c88c9..8d641001a9 100644
--- a/tools/binman/etype/blob_ext.py
+++ b/tools/binman/etype/blob_ext.py
@@ -34,5 +34,6 @@ class Entry_blob_ext(Entry_blob):
# Allow the file to be missing
if not self._pathname:
self.SetContents(b'')
+ self.missing = True
return True
return super().ObtainContents()
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 44b13b2575..3b42a5890f 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -50,6 +50,7 @@ class Entry_section(Entry):
self._skip_at_start = None
self._end_4gb = False
self._allow_missing = False
+ self.missing = False
def ReadNode(self):
"""Read properties from the image node"""
@@ -543,7 +544,9 @@ class Entry_section(Entry):
Args:
allow_missing: True if allowed, False if not allowed
"""
- self._allow_missing = allow_missing
+ super().SetAllowMissing(allow_missing)
+ for entry in self._entries.values():
+ entry.SetAllowMissing(allow_missing)
def GetAllowMissing(self):
"""Get whether a section allows missing external blobs
@@ -552,3 +555,14 @@ class Entry_section(Entry):
True if allowed, False if not allowed
"""
return self._allow_missing
+
+ def CheckMissing(self, missing_list):
+ """Check if any entries in this section have missing external blobs
+
+ If there are missing blobs, the entries are added to the list
+
+ Args:
+ missing_list: List of Entry objects to be added to
+ """
+ for entry in self._entries.values():
+ entry.CheckMissing(missing_list)
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 928d3608a3..cc551c9f17 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -3380,7 +3380,19 @@ class TestFunctional(unittest.TestCase):
def testExtblobMissingOk(self):
"""Test an image with an missing external blob that is allowed"""
- self._DoTestFile('158_blob_ext_missing.dts', allow_missing=True)
+ with test_util.capture_sys_output() as (stdout, stderr):
+ self._DoTestFile('158_blob_ext_missing.dts', allow_missing=True)
+ err = stderr.getvalue()
+ self.assertRegex(err, "Image 'main-section'.*missing.*: blob-ext")
+
+ def testExtblobMissingOkSect(self):
+ """Test an image with an missing external blob that is allowed"""
+ with test_util.capture_sys_output() as (stdout, stderr):
+ self._DoTestFile('159_blob_ext_missing_sect.dts',
+ allow_missing=True)
+ err = stderr.getvalue()
+ self.assertRegex(err, "Image 'main-section'.*missing.*: "
+ "blob-ext blob-ext2")
if __name__ == "__main__":
diff --git a/tools/binman/test/159_blob_ext_missing_sect.dts b/tools/binman/test/159_blob_ext_missing_sect.dts
new file mode 100644
index 0000000000..5f14c54138
--- /dev/null
+++ b/tools/binman/test/159_blob_ext_missing_sect.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <0x80>;
+
+ section {
+ blob-ext {
+ filename = "missing-file";
+ };
+ };
+
+ blob-ext2 {
+ type = "blob-ext";
+ filename = "missing-file2";
+ };
+ };
+};
diff --git a/tools/patman/tout.py b/tools/patman/tout.py
index 91a53f4073..33305263d8 100644
--- a/tools/patman/tout.py
+++ b/tools/patman/tout.py
@@ -171,6 +171,7 @@ def Init(_verbose=WARNING, stdout=sys.stdout):
# TODO(sjg): Move this into Chromite libraries when we have them
stdout_is_tty = hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()
+ stderr_is_tty = hasattr(sys.stderr, 'isatty') and sys.stderr.isatty()
def Uninit():
ClearProgress()
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 17/49] binman: Allow missing Intel blobs
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (15 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 16/49] binman: Detect when valid images are not produced Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 18/49] binman: Allow zero-length entries to overlap Simon Glass
` (31 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Update the Intel blob entries to support missing binaries.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/etype/intel_descriptor.py | 7 ++++-
tools/binman/etype/intel_ifwi.py | 17 ++++++++---
tools/binman/etype/section.py | 4 +--
tools/binman/ftest.py | 41 +++++++++++++++++++++-----
4 files changed, 55 insertions(+), 14 deletions(-)
diff --git a/tools/binman/etype/intel_descriptor.py b/tools/binman/etype/intel_descriptor.py
index 5b18893ccd..7fe88a9ec1 100644
--- a/tools/binman/etype/intel_descriptor.py
+++ b/tools/binman/etype/intel_descriptor.py
@@ -55,6 +55,12 @@ class Entry_intel_descriptor(Entry_blob_ext):
return super().Pack(offset)
def GetOffsets(self):
+ info = {}
+ if self.missing:
+ # Return zero offsets so that these entries get placed somewhere
+ if self.HasSibling('intel-me'):
+ info['intel-me'] = [0, None]
+ return info
offset = self.data.find(FD_SIGNATURE)
if offset == -1:
self.Raise('Cannot find Intel Flash Descriptor (FD) signature')
@@ -66,7 +72,6 @@ class Entry_intel_descriptor(Entry_blob_ext):
# Set the offset for ME (Management Engine) and IFWI (Integrated
# Firmware Image), for now, since the others are not used.
- info = {}
if self.HasSibling('intel-me'):
info['intel-me'] = [self._regions[REGION_ME].base,
self._regions[REGION_ME].size]
diff --git a/tools/binman/etype/intel_ifwi.py b/tools/binman/etype/intel_ifwi.py
index b0c2b1aaa3..76b3357c25 100644
--- a/tools/binman/etype/intel_ifwi.py
+++ b/tools/binman/etype/intel_ifwi.py
@@ -84,7 +84,7 @@ class Entry_intel_ifwi(Entry_blob_ext):
return True
def ObtainContents(self):
- """Get the contects for the IFWI
+ """Get the contents for the IFWI
Unfortunately we cannot create anything from scratch here, as Intel has
tools which create precursor binaries with lots of data and settings,
@@ -97,13 +97,21 @@ class Entry_intel_ifwi(Entry_blob_ext):
After that we delete the OBBP sub-partition and add each of the files
that we want in the IFWI file, one for each sub-entry of the IWFI node.
"""
- self._pathname = tools.GetInputFilename(self._filename)
+ self._pathname = tools.GetInputFilename(self._filename,
+ self.section.GetAllowMissing())
+ # Allow the file to be missing
+ if not self._pathname:
+ self.SetContents(b'')
+ self.missing = True
+ return True
for entry in self._ifwi_entries.values():
if not entry.ObtainContents():
return False
return self._BuildIfwi()
def ProcessContents(self):
+ if self.missing:
+ return True
orig_data = self.data
self._BuildIfwi()
same = orig_data == self.data
@@ -121,5 +129,6 @@ class Entry_intel_ifwi(Entry_blob_ext):
def WriteSymbols(self, section):
"""Write symbol values into binary files for access at run time"""
- for entry in self._ifwi_entries.values():
- entry.WriteSymbols(self)
+ if not self.missing:
+ for entry in self._ifwi_entries.values():
+ entry.WriteSymbols(self)
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 3b42a5890f..99c505b49b 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -437,8 +437,8 @@ class Entry_section(Entry):
if not entry:
self._Raise("Unable to set offset/size for unknown entry '%s'" %
name)
- entry.SetOffsetSize(self._skip_at_start + offset if offset else None,
- size)
+ entry.SetOffsetSize(self._skip_at_start + offset if offset is not None
+ else None, size)
def GetEntryOffsets(self):
"""Handle entries that want to set the offset/size of other entries
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index cc551c9f17..146d4c51d3 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -160,8 +160,7 @@ class TestFunctional(unittest.TestCase):
tools.ReadFile(cls.ElfTestFile('u_boot_ucode_ptr')))
# Intel flash descriptor file
- with open(cls.TestFile('descriptor.bin'), 'rb') as fd:
- TestFunctional._MakeInputFile('descriptor.bin', fd.read())
+ cls._SetupDescriptor()
shutil.copytree(cls.TestFile('files'),
os.path.join(cls._indir, 'files'))
@@ -507,6 +506,11 @@ class TestFunctional(unittest.TestCase):
TestFunctional._MakeInputFile('tpl/u-boot-tpl',
tools.ReadFile(cls.ElfTestFile(src_fname)))
+ @classmethod
+ def _SetupDescriptor(cls):
+ with open(cls.TestFile('descriptor.bin'), 'rb') as fd:
+ TestFunctional._MakeInputFile('descriptor.bin', fd.read())
+
@classmethod
def TestFile(cls, fname):
return os.path.join(cls._binman_dir, 'test', fname)
@@ -933,11 +937,14 @@ class TestFunctional(unittest.TestCase):
def testPackX86RomMeNoDesc(self):
"""Test that an invalid Intel descriptor entry is detected"""
- TestFunctional._MakeInputFile('descriptor.bin', b'')
- with self.assertRaises(ValueError) as e:
- self._DoTestFile('031_x86_rom_me.dts')
- self.assertIn("Node '/binman/intel-descriptor': Cannot find Intel Flash Descriptor (FD) signature",
- str(e.exception))
+ try:
+ TestFunctional._MakeInputFile('descriptor.bin', b'')
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('031_x86_rom_me.dts')
+ self.assertIn("Node '/binman/intel-descriptor': Cannot find Intel Flash Descriptor (FD) signature",
+ str(e.exception))
+ finally:
+ self._SetupDescriptor()
def testPackX86RomBadDesc(self):
"""Test that the Intel requires a descriptor entry"""
@@ -3394,6 +3401,26 @@ class TestFunctional(unittest.TestCase):
self.assertRegex(err, "Image 'main-section'.*missing.*: "
"blob-ext blob-ext2")
+ def testPackX86RomMeMissingDesc(self):
+ """Test that an missing Intel descriptor entry is allowed"""
+ pathname = os.path.join(self._indir, 'descriptor.bin')
+ os.remove(pathname)
+ with test_util.capture_sys_output() as (stdout, stderr):
+ self._DoTestFile('031_x86_rom_me.dts', allow_missing=True)
+ err = stderr.getvalue()
+ self.assertRegex(err,
+ "Image 'main-section'.*missing.*: intel-descriptor")
+
+ def testPackX86RomMissingIfwi(self):
+ """Test that an x86 ROM with Integrated Firmware Image can be created"""
+ self._SetupIfwi('fitimage.bin')
+ pathname = os.path.join(self._indir, 'fitimage.bin')
+ os.remove(pathname)
+ with test_util.capture_sys_output() as (stdout, stderr):
+ self._DoTestFile('111_x86_rom_ifwi.dts', allow_missing=True)
+ err = stderr.getvalue()
+ self.assertRegex(err, "Image 'main-section'.*missing.*: intel-ifwi")
+
if __name__ == "__main__":
unittest.main()
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 18/49] binman: Allow zero-length entries to overlap
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (16 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 17/49] binman: Allow missing Intel blobs Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp Simon Glass
` (30 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Some binary blobs unfortunately obtain their position in the image from
other binary blobs, such as Intel's 'descriptor'. In this case we cannot
rely on packing to work. It is not possible to produce a valid image in
any case, due to the missing blobs.
Allow zero-length overlaps so that this does not cause any problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/etype/section.py | 2 +-
tools/binman/ftest.py | 4 ++++
tools/binman/test/160_pack_overlap_zero.dts | 18 ++++++++++++++++++
3 files changed, 23 insertions(+), 1 deletion(-)
create mode 100644 tools/binman/test/160_pack_overlap_zero.dts
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 99c505b49b..7563cff5ea 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -221,7 +221,7 @@ class Entry_section(Entry):
"at %#x (%d)" %
(entry.offset, entry.offset, self._skip_at_start,
self._skip_at_start))
- if entry.offset < offset:
+ if entry.offset < offset and entry.size:
entry.Raise("Offset %#x (%d) overlaps with previous entry '%s' "
"ending@%#x (%d)" %
(entry.offset, entry.offset, prev_name, offset, offset))
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 146d4c51d3..614ac4ed39 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -3421,6 +3421,10 @@ class TestFunctional(unittest.TestCase):
err = stderr.getvalue()
self.assertRegex(err, "Image 'main-section'.*missing.*: intel-ifwi")
+ def testPackOverlap(self):
+ """Test that zero-size overlapping regions are ignored"""
+ self._DoTestFile('160_pack_overlap_zero.dts')
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/160_pack_overlap_zero.dts b/tools/binman/test/160_pack_overlap_zero.dts
new file mode 100644
index 0000000000..731aa1cbe6
--- /dev/null
+++ b/tools/binman/test/160_pack_overlap_zero.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ };
+
+ fill {
+ size = <0>;
+ offset = <3>;
+ };
+ };
+};
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (17 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 18/49] binman: Allow zero-length entries to overlap Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 20/49] dtoc: Allow adding variable-sized data to a dtb Simon Glass
` (29 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Normally the FIT timestamp is created the first time mkimage is run on a
FIT, when converting the source .its to the binary .fit file. This
corresponds to using the -f flag. But if the original input to mkimage is
a binary file (already compiled) then the timestamp is assumed to have
been set previously.
Add a -t flag to allow setting the timestamp in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
doc/mkimage.1 | 9 +++++++++
tools/fit_image.c | 2 +-
tools/imagetool.h | 1 +
tools/mkimage.c | 5 ++++-
4 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/doc/mkimage.1 b/doc/mkimage.1
index 3dcdcedcef..fea5288784 100644
--- a/doc/mkimage.1
+++ b/doc/mkimage.1
@@ -167,6 +167,15 @@ Specifies that keys used to sign the FIT are required. This means that they
must be verified for the image to boot. Without this option, the verification
will be optional (useful for testing but not for release).
+.TP
+.BI "\-t
+Update the timestamp in the FIT.
+
+Normally the FIT timestamp is created the first time mkimage is run on a FIT,
+when converting the source .its to the binary .fit file. This corresponds to
+using the -f flag. But if the original input to mkimage is a binary file
+(already compiled) then the timestamp is assumed to have been set previously.
+
.SH EXAMPLES
List image information:
diff --git a/tools/fit_image.c b/tools/fit_image.c
index a082d9386d..df310b53da 100644
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -53,7 +53,7 @@ static int fit_add_file_data(struct image_tool_params *params, size_t size_inc,
}
/* for first image creation, add a timestamp at offset 0 i.e., root */
- if (params->datafile) {
+ if (params->datafile || params->reset_timestamp) {
time_t time = imagetool_get_source_date(params->cmdname,
sbuf.st_mtime);
ret = fit_set_timestamp(ptr, 0, time);
diff --git a/tools/imagetool.h b/tools/imagetool.h
index f54809cd57..acbc48e9be 100644
--- a/tools/imagetool.h
+++ b/tools/imagetool.h
@@ -81,6 +81,7 @@ struct image_tool_params {
unsigned int external_offset; /* Add padding to external data */
int bl_len; /* Block length in byte for external data */
const char *engine_id; /* Engine to use for signing */
+ bool reset_timestamp; /* Reset the timestamp on an existing image */
};
/*
diff --git a/tools/mkimage.c b/tools/mkimage.c
index d2cd191787..a7eb4d4360 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -145,7 +145,7 @@ static void process_args(int argc, char **argv)
int opt;
while ((opt = getopt(argc, argv,
- "a:A:b:B:c:C:d:D:e:Ef:Fk:i:K:ln:N:p:O:rR:qsT:vVx")) != -1) {
+ "a:A:b:B:c:C:d:D:e:Ef:Fk:i:K:ln:N:p:O:rR:qstT:vVx")) != -1) {
switch (opt) {
case 'a':
params.addr = strtoull(optarg, &ptr, 16);
@@ -269,6 +269,9 @@ static void process_args(int argc, char **argv)
case 's':
params.skipcpy = 1;
break;
+ case 't':
+ params.reset_timestamp = 1;
+ break;
case 'T':
if (strcmp(optarg, "list") == 0) {
show_valid_options(IH_TYPE);
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 20/49] dtoc: Allow adding variable-sized data to a dtb
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (18 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp Simon Glass
@ 2020-06-14 2:56 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 21/49] binman: Add support for generating a FIT Simon Glass
` (28 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:56 UTC (permalink / raw)
To: u-boot
Add a method for adding a property containing arbitrary bytes. Make sure
that the tree can expand as needed in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/dtoc/fdt.py | 17 +++++++++++++++--
tools/dtoc/test_fdt.py | 4 ++++
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py
index 188490b728..d058c59e92 100644
--- a/tools/dtoc/fdt.py
+++ b/tools/dtoc/fdt.py
@@ -207,7 +207,8 @@ class Prop:
if auto_resize:
while fdt_obj.setprop(node.Offset(), self.name, self.bytes,
(libfdt.NOSPACE,)) == -libfdt.NOSPACE:
- fdt_obj.resize(fdt_obj.totalsize() + 1024)
+ fdt_obj.resize(fdt_obj.totalsize() + 1024 +
+ len(self.bytes))
fdt_obj.setprop(node.Offset(), self.name, self.bytes)
else:
fdt_obj.setprop(node.Offset(), self.name, self.bytes)
@@ -410,6 +411,18 @@ class Node:
val = val.encode('utf-8')
self._CheckProp(prop_name).props[prop_name].SetData(val + b'\0')
+ def AddData(self, prop_name, val):
+ """Add a new property to a node
+
+ The device tree is marked dirty so that the value will be written to
+ the blob on the next sync.
+
+ Args:
+ prop_name: Name of property to add
+ val: Bytes value of property
+ """
+ self.props[prop_name] = Prop(self, None, prop_name, val)
+
def AddString(self, prop_name, val):
"""Add a new string property to a node
@@ -422,7 +435,7 @@ class Node:
"""
if sys.version_info[0] >= 3: # pragma: no cover
val = bytes(val, 'utf-8')
- self.props[prop_name] = Prop(self, None, prop_name, val + b'\0')
+ self.AddData(prop_name, val + b'\0')
def AddSubnode(self, name):
"""Add a new subnode to the node
diff --git a/tools/dtoc/test_fdt.py b/tools/dtoc/test_fdt.py
index 375e906424..b4f9b7f498 100755
--- a/tools/dtoc/test_fdt.py
+++ b/tools/dtoc/test_fdt.py
@@ -417,6 +417,10 @@ class TestProp(unittest.TestCase):
self.node.SetData('empty', b'123')
self.assertEqual(b'123', prop.bytes)
+ # Trying adding a lot of data at once
+ self.node.AddData('data', tools.GetBytes(65, 20000))
+ self.dtb.Sync(auto_resize=True)
+
def testFromData(self):
dtb2 = fdt.Fdt.FromData(self.dtb.GetContents())
self.assertEqual(dtb2.GetContents(), self.dtb.GetContents())
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 21/49] binman: Add support for generating a FIT
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (19 preceding siblings ...)
2020-06-14 2:56 ` [PATCH v2 20/49] dtoc: Allow adding variable-sized data to a dtb Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works Simon Glass
` (27 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
FIT (Flat Image Tree) is the main image format used by U-Boot. In some
cases scripts are used to create FITs within the U-Boot build system. This
is not ideal for various reasons:
- Each architecture has its own slightly different script
- There are no tests
- Some are written in shell, some in Python
To help address this, add support for FIT generation to binman. This works
by putting the FIT source directly in the binman definition, with the
ability to adjust parameters, etc. The contents of each FIT image come
from sub-entries of the image, as is normal with binman.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
tools/binman/README.entries | 40 ++++++
tools/binman/etype/fit.py | 164 +++++++++++++++++++++++++
tools/binman/ftest.py | 54 ++++++++
tools/binman/test/161_fit.dts | 62 ++++++++++
tools/binman/test/162_fit_external.dts | 64 ++++++++++
5 files changed, 384 insertions(+)
create mode 100644 tools/binman/etype/fit.py
create mode 100644 tools/binman/test/161_fit.dts
create mode 100644 tools/binman/test/162_fit_external.dts
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index e88fd846db..ffb87846bf 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -311,6 +311,46 @@ byte value of a region.
+Entry: fit: Entry containing a FIT
+----------------------------------
+
+This calls mkimage to create a FIT (U-Boot Flat Image Tree) based on the
+input provided.
+
+Nodes for the FIT should be written out in the binman configuration just as
+they would be in a file passed to mkimage.
+
+For example, this creates an image containing a FIT with U-Boot SPL:
+
+ binman {
+ fit {
+ description = "Test FIT";
+
+ images {
+ kernel at 1 {
+ description = "SPL";
+ os = "u-boot";
+ type = "rkspi";
+ arch = "arm";
+ compression = "none";
+ load = <0>;
+ entry = <0>;
+
+ u-boot-spl {
+ };
+ };
+ };
+ };
+ };
+
+Properties:
+ fit,external-offset: Indicates that the contents of the FIT are external
+ and provides the external offset. This is passsed to mkimage via
+ the -E and -p flags.
+
+
+
+
Entry: fmap: An entry which contains an Fmap section
----------------------------------------------------
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py
new file mode 100644
index 0000000000..75712f4409
--- /dev/null
+++ b/tools/binman/etype/fit.py
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# Entry-type module for producing a FIT
+#
+
+from collections import defaultdict, OrderedDict
+import libfdt
+
+from binman.entry import Entry
+from dtoc import fdt_util
+from dtoc.fdt import Fdt
+from patman import tools
+
+class Entry_fit(Entry):
+ """Entry containing a FIT
+
+ This calls mkimage to create a FIT (U-Boot Flat Image Tree) based on the
+ input provided.
+
+ Nodes for the FIT should be written out in the binman configuration just as
+ they would be in a file passed to mkimage.
+
+ For example, this creates an image containing a FIT with U-Boot SPL:
+
+ binman {
+ fit {
+ description = "Test FIT";
+
+ images {
+ kernel at 1 {
+ description = "SPL";
+ os = "u-boot";
+ type = "rkspi";
+ arch = "arm";
+ compression = "none";
+ load = <0>;
+ entry = <0>;
+
+ u-boot-spl {
+ };
+ };
+ };
+ };
+ };
+
+ Properties:
+ fit,external-offset: Indicates that the contents of the FIT are external
+ and provides the external offset. This is passsed to mkimage via
+ the -E and -p flags.
+
+ """
+ def __init__(self, section, etype, node):
+ """
+ Members:
+ _fit: FIT file being built
+ _fit_content: dict:
+ key: relative path to entry Node (from the base of the FIT)
+ value: List of Entry objects comprising the contents of this
+ node
+ """
+ super().__init__(section, etype, node)
+ self._fit = None
+ self._fit_content = defaultdict(list)
+ self._fit_props = {}
+
+ def ReadNode(self):
+ self._ReadSubnodes()
+ super().ReadNode()
+
+ def _ReadSubnodes(self):
+ def _AddNode(base_node, depth, node):
+ """Add a node to the FIT
+
+ Args:
+ base_node: Base Node of the FIT (with 'description' property)
+ depth: Current node depth (0 is the base node)
+ node: Current node to process
+
+ There are two cases to deal with:
+ - hash and signature nodes which become part of the FIT
+ - binman entries which are used to define the 'data' for each
+ image
+ """
+ for pname, prop in node.props.items():
+ if pname.startswith('fit,'):
+ self._fit_props[pname] = prop
+ else:
+ fsw.property(pname, prop.bytes)
+
+ rel_path = node.path[len(base_node.path):]
+ has_images = depth == 2 and rel_path.startswith('/images/')
+ for subnode in node.subnodes:
+ if has_images and not (subnode.name.startswith('hash') or
+ subnode.name.startswith('signature')):
+ # This is a content node. We collect all of these together
+ # and put them in the 'data' property. They do not appear
+ # in the FIT.
+ entry = Entry.Create(self.section, subnode)
+ entry.ReadNode()
+ self._fit_content[rel_path].append(entry)
+ else:
+ with fsw.add_node(subnode.name):
+ _AddNode(base_node, depth + 1, subnode)
+
+ # Build a new tree with all nodes and properties starting from the
+ # entry node
+ fsw = libfdt.FdtSw()
+ fsw.finish_reservemap()
+ with fsw.add_node(''):
+ _AddNode(self._node, 0, self._node)
+ fdt = fsw.as_fdt()
+
+ # Pack this new FDT and scan it so we can add the data later
+ fdt.pack()
+ self._fdt = Fdt.FromData(fdt.as_bytearray())
+ self._fdt.Scan()
+
+ def ObtainContents(self):
+ """Obtain the contents of the FIT
+
+ This adds the 'data' properties to the input ITB (Image-tree Binary)
+ then runs mkimage to process it.
+ """
+ data = self._BuildInput(self._fdt)
+ if data == False:
+ return False
+ uniq = self.GetUniqueName()
+ input_fname = tools.GetOutputFilename('%s.itb' % uniq)
+ output_fname = tools.GetOutputFilename('%s.fit' % uniq)
+ tools.WriteFile(input_fname, data)
+ tools.WriteFile(output_fname, data)
+
+ args = []
+ ext_offset = self._fit_props.get('fit,external-offset')
+ if ext_offset is not None:
+ args += ['-E', '-p', '%x' % fdt_util.fdt32_to_cpu(ext_offset.value)]
+ tools.Run('mkimage', '-t', '-F', output_fname, *args)
+
+ self.SetContents(tools.ReadFile(output_fname))
+ return True
+
+ def _BuildInput(self, fdt):
+ """Finish the FIT by adding the 'data' properties to it
+
+ Arguments:
+ fdt: FIT to update
+
+ Returns:
+ New fdt contents (bytes)
+ """
+ for path, entries in self._fit_content.items():
+ node = fdt.GetNode(path)
+ data = b''
+ for entry in entries:
+ if not entry.ObtainContents():
+ return False
+ data += entry.GetData()
+ node.AddData('data', data)
+
+ fdt.Sync(auto_resize=True)
+ data = fdt.GetContents()
+ return data
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 614ac4ed39..ea72eff8c5 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -6,10 +6,12 @@
#
# python -m unittest func_test.TestFunctional.testHelp
+import collections
import gzip
import hashlib
from optparse import OptionParser
import os
+import re
import shutil
import struct
import sys
@@ -3425,6 +3427,58 @@ class TestFunctional(unittest.TestCase):
"""Test that zero-size overlapping regions are ignored"""
self._DoTestFile('160_pack_overlap_zero.dts')
+ def testSimpleFit(self):
+ """Test an image with a FIT inside"""
+ data = self._DoReadFile('161_fit.dts')
+ self.assertEqual(U_BOOT_DATA, data[:len(U_BOOT_DATA)])
+ self.assertEqual(U_BOOT_NODTB_DATA, data[-len(U_BOOT_NODTB_DATA):])
+ fit_data = data[len(U_BOOT_DATA):-len(U_BOOT_NODTB_DATA)]
+
+ # The data should be inside the FIT
+ dtb = fdt.Fdt.FromData(fit_data)
+ dtb.Scan()
+ fnode = dtb.GetNode('/images/kernel')
+ self.assertIn('data', fnode.props)
+
+ fname = os.path.join(self._indir, 'fit_data.fit')
+ tools.WriteFile(fname, fit_data)
+ out = tools.Run('dumpimage', '-l', fname)
+
+ # Check a few features to make sure the plumbing works. We don't need
+ # to test the operation of mkimage or dumpimage here. First convert the
+ # output into a dict where the keys are the fields printed by dumpimage
+ # and the values are a list of values for each field
+ lines = out.splitlines()
+
+ # Converts "Compression: gzip compressed" into two groups:
+ # 'Compression' and 'gzip compressed'
+ re_line = re.compile(r'^ *([^:]*)(?:: *(.*))?$')
+ vals = collections.defaultdict(list)
+ for line in lines:
+ mat = re_line.match(line)
+ vals[mat.group(1)].append(mat.group(2))
+
+ self.assertEquals('FIT description: test-desc', lines[0])
+ self.assertIn('Created:', lines[1])
+ self.assertIn('Image 0 (kernel)', vals)
+ self.assertIn('Hash value', vals)
+ data_sizes = vals.get('Data Size')
+ self.assertIsNotNone(data_sizes)
+ self.assertEqual(2, len(data_sizes))
+ # Format is "4 Bytes = 0.00 KiB = 0.00 MiB" so take the first word
+ self.assertEqual(len(U_BOOT_DATA), int(data_sizes[0].split()[0]))
+ self.assertEqual(len(U_BOOT_SPL_DTB_DATA), int(data_sizes[1].split()[0]))
+
+ def testFitExternal(self):
+ """Test an image with an FIT"""
+ data = self._DoReadFile('162_fit_external.dts')
+ fit_data = data[len(U_BOOT_DATA):-2] # _testing is 2 bytes
+
+ # The data should be outside the FIT
+ dtb = fdt.Fdt.FromData(fit_data)
+ dtb.Scan()
+ fnode = dtb.GetNode('/images/kernel')
+ self.assertNotIn('data', fnode.props)
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/161_fit.dts b/tools/binman/test/161_fit.dts
new file mode 100644
index 0000000000..c52d760b73
--- /dev/null
+++ b/tools/binman/test/161_fit.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ };
+ fit {
+ description = "test-desc";
+ #address-cells = <1>;
+
+ images {
+ kernel {
+ description = "Vanilla Linux kernel";
+ type = "kernel";
+ arch = "ppc";
+ os = "linux";
+ compression = "gzip";
+ load = <00000000>;
+ entry = <00000000>;
+ hash-1 {
+ algo = "crc32";
+ };
+ hash-2 {
+ algo = "sha1";
+ };
+ u-boot {
+ };
+ };
+ fdt-1 {
+ description = "Flattened Device Tree blob";
+ type = "flat_dt";
+ arch = "ppc";
+ compression = "none";
+ hash-1 {
+ algo = "crc32";
+ };
+ hash-2 {
+ algo = "sha1";
+ };
+ u-boot-spl-dtb {
+ };
+ };
+ };
+
+ configurations {
+ default = "conf-1";
+ conf-1 {
+ description = "Boot Linux kernel with FDT blob";
+ kernel = "kernel";
+ fdt = "fdt-1";
+ };
+ };
+ };
+ u-boot-nodtb {
+ };
+ };
+};
diff --git a/tools/binman/test/162_fit_external.dts b/tools/binman/test/162_fit_external.dts
new file mode 100644
index 0000000000..19518e05a5
--- /dev/null
+++ b/tools/binman/test/162_fit_external.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ u-boot {
+ };
+ fit {
+ fit,external-offset = <0>;
+ description = "test-desc";
+ #address-cells = <1>;
+
+ images {
+ kernel {
+ description = "Vanilla Linux kernel";
+ type = "kernel";
+ arch = "ppc";
+ os = "linux";
+ compression = "gzip";
+ load = <00000000>;
+ entry = <00000000>;
+ hash-1 {
+ algo = "crc32";
+ };
+ hash-2 {
+ algo = "sha1";
+ };
+ u-boot {
+ };
+ };
+ fdt-1 {
+ description = "Flattened Device Tree blob";
+ type = "flat_dt";
+ arch = "ppc";
+ compression = "none";
+ hash-1 {
+ algo = "crc32";
+ };
+ hash-2 {
+ algo = "sha1";
+ };
+ _testing {
+ return-contents-later;
+ };
+ };
+ };
+
+ configurations {
+ default = "conf-1";
+ conf-1 {
+ description = "Boot Linux kernel with FDT blob";
+ kernel = "kernel";
+ fdt = "fdt-1";
+ };
+ };
+ };
+ u-boot-nodtb {
+ };
+ };
+};
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (20 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 21/49] binman: Add support for generating a FIT Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:30 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 23/49] rockchip: Allow Bob to use SPI boot Simon Glass
` (26 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Most x86 boards build a u-boot.rom which is programmed into SPI flash. But
this is not unique to x86. For example some rockchip boards can also boot
from SPI flash.
Also, at least on x86, binary blobs are sadly quite common. It is not
possible to build a functional image without them, and U-Boot needs to
know this at build time.
Introduce a new CONFIG_HAS_ROM option which selects whether u-boot.rom is
built and a new CONFIG_ROM_NEEDS_BLOBS option to indicate whether binary
blobs are also needed. If they are not needed, it is safe to build the ROM
always. Otherwise we still require the BUILD_ROM environment variable.
For now this affects only x86, but future patches will enable this for
rockchip too.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Kconfig | 18 +++++++++++++++++-
Makefile | 18 +++++++++++++-----
arch/Kconfig | 1 +
arch/x86/Kconfig | 4 ++++
arch/x86/cpu/baytrail/Kconfig | 1 +
arch/x86/cpu/quark/Kconfig | 1 +
6 files changed, 37 insertions(+), 6 deletions(-)
diff --git a/Kconfig b/Kconfig
index 0e7ccc0b07..876c5db911 100644
--- a/Kconfig
+++ b/Kconfig
@@ -240,9 +240,25 @@ config PHYS_64BIT
This can be used not only for 64bit SoCs, but also for
large physical address extension on 32bit SoCs.
+config HAS_ROM
+ bool
+ select BINMAN
+ help
+ Enables building of a u-boot.rom target. This collects U-Boot and
+ any necessary binary blobs.
+
+config ROM_NEEDS_BLOBS
+ bool
+ depends on HAS_ROM
+ help
+ Enable this if building the u-boot.rom target needs binary blobs, and
+ so cannot be done normally. In this case, pass BUILD_ROM=1 to make
+ to tell U-Boot to build the ROM.
+
config BUILD_ROM
bool "Build U-Boot as BIOS replacement"
- depends on X86
+ depends on HAS_ROM
+ default y if !ROM_NEEDS_BLOBS
help
This option allows to build a ROM version of U-Boot.
The build process generally requires several binary blobs
diff --git a/Makefile b/Makefile
index 149f839948..8a2bb94f2c 100644
--- a/Makefile
+++ b/Makefile
@@ -916,9 +916,12 @@ ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
+ifneq ($(CONFIG_HAS_ROM),)
ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
-ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ALL-y += u-boot.rom
endif
+endif
+
ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
ALL-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
endif
@@ -1580,7 +1583,7 @@ endif
# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
# the middle. This is handled by binman based on an image description in the
# board's device tree.
-ifneq ($(CONFIG_X86_RESET_VECTOR),)
+ifneq ($(CONFIG_HAS_ROM),)
rom: u-boot.rom FORCE
refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
@@ -1590,11 +1593,12 @@ quiet_cmd_ldr = LD $@
cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
$(filter-out FORCE,$^) -o $@
-u-boot.rom: u-boot-x86-start16.bin u-boot-x86-reset16.bin u-boot.bin \
+rom-deps := u-boot.bin
+ifdef CONFIG_X86
+rom-deps += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
$(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
- $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
- $(call if_changed,binman)
+ $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
u-boot-x86-start16.bin: u-boot FORCE
@@ -1605,6 +1609,10 @@ u-boot-x86-reset16.bin: u-boot FORCE
$(call if_changed,objcopy)
endif
+u-boot.rom: $(rom-deps) FORCE
+ $(call if_changed,binman)
+endif
+
ifneq ($(CONFIG_ARCH_SUNXI),)
ifeq ($(CONFIG_ARM64),)
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
diff --git a/arch/Kconfig b/arch/Kconfig
index a11f872938..ff417d40fd 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -160,6 +160,7 @@ config X86
select TIMER
select USE_PRIVATE_LIBGCC
select X86_TSC_TIMER
+ imply HAS_ROM if X86_RESET_VECTOR
imply BLK
imply CMD_DM
imply CMD_FPGA_LOADMK
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c8eae24c07..c688c46475 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -360,6 +360,8 @@ config HAVE_FSP
bool "Add an Firmware Support Package binary"
depends on !EFI
select USE_HOB
+ select HAS_ROM
+ select ROM_NEEDS_BLOBS
help
Select this option to add an Firmware Support Package binary to
the resulting U-Boot image. It is a binary blob which U-Boot uses
@@ -519,6 +521,8 @@ config ENABLE_MRC_CACHE
config HAVE_MRC
bool "Add a System Agent binary"
+ select HAS_ROM
+ select ROM_NEEDS_BLOBS
depends on !HAVE_FSP
help
Select this option to add a System Agent binary to
diff --git a/arch/x86/cpu/baytrail/Kconfig b/arch/x86/cpu/baytrail/Kconfig
index d2c3473d6a..53d945e931 100644
--- a/arch/x86/cpu/baytrail/Kconfig
+++ b/arch/x86/cpu/baytrail/Kconfig
@@ -7,6 +7,7 @@ config INTEL_BAYTRAIL
select HAVE_FSP
select ARCH_MISC_INIT
select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED
+ imply ROM_NEEDS_BLOBS
imply HAVE_INTEL_ME
imply ENABLE_MRC_CACHE
imply AHCI_PCI
diff --git a/arch/x86/cpu/quark/Kconfig b/arch/x86/cpu/quark/Kconfig
index 430cce184d..2fee38aed7 100644
--- a/arch/x86/cpu/quark/Kconfig
+++ b/arch/x86/cpu/quark/Kconfig
@@ -24,6 +24,7 @@ if INTEL_QUARK
config HAVE_RMU
bool "Add a Remote Management Unit (RMU) binary"
+ select ROM_NEEDS_BLOBS
help
Select this option to add a Remote Management Unit (RMU) binary
to the resulting U-Boot image. It is a data block (up to 64K) of
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 23/49] rockchip: Allow Bob to use SPI boot
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (21 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards Simon Glass
` (25 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Bob is a Chromebook and can boot from SPI flash. Add it to the condition
check for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/mach-rockchip/spl.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/spl.c b/arch/arm/mach-rockchip/spl.c
index cddf4fd3d5..f148d48b6a 100644
--- a/arch/arm/mach-rockchip/spl.c
+++ b/arch/arm/mach-rockchip/spl.c
@@ -54,7 +54,8 @@ u32 spl_boot_device(void)
#if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \
defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \
defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) || \
- defined(CONFIG_TARGET_CHROMEBOOK_SPEEDY)
+ defined(CONFIG_TARGET_CHROMEBOOK_SPEEDY) || \
+ defined(CONFIG_TARGET_CHROMEBOOK_BOB)
return BOOT_DEVICE_SPI;
#endif
if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM))
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (22 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 23/49] rockchip: Allow Bob to use SPI boot Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:30 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 25/49] rockchip: jerry: Add serial support Simon Glass
` (24 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Some non-x86 devices can use SPI flash to boot and need to produce images
of a fixed size to program the flash.
Add a way to handle this for non-x86 boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Makefile b/Makefile
index 8a2bb94f2c..07c237120d 100644
--- a/Makefile
+++ b/Makefile
@@ -1607,6 +1607,18 @@ u-boot-x86-start16.bin: u-boot FORCE
OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
u-boot-x86-reset16.bin: u-boot FORCE
$(call if_changed,objcopy)
+
+else # !CONFIG_X86
+
+ifdef CONFIG_SPL
+rom-deps += spl/u-boot-spl.bin
+rom-deps += u-boot.img
+endif
+
+ifdef CONFIG_TPL
+rom-deps += tpl/u-boot-tpl.bin
+endif
+
endif
u-boot.rom: $(rom-deps) FORCE
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 25/49] rockchip: jerry: Add serial support
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (23 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 26/49] rockchip: bob: Support SPI-flash booting Simon Glass
` (23 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
This option allows the serial console to work correctly. Add it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
configs/chromebook_jerry_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig
index 443e3cdace..7f772b828f 100644
--- a/configs/chromebook_jerry_defconfig
+++ b/configs/chromebook_jerry_defconfig
@@ -85,6 +85,7 @@ CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_ROCKCHIP_SERIAL=y
CONFIG_SOUND=y
CONFIG_I2S=y
CONFIG_I2S_ROCKCHIP=y
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 26/49] rockchip: bob: Support SPI-flash booting
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (24 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 25/49] rockchip: jerry: Add serial support Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 27/49] rockchip: Enable building a SPI ROM image on jerry Simon Glass
` (22 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Update the config for chromebook_bob to support booting from SPI flash.
The existing SPL size is too small since ATF is needed, so double it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
configs/chromebook_bob_defconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index 4f606e7ec9..8df4bbc197 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_ROCKCHIP_BOOT_MODE_REG=0
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
@@ -40,6 +40,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-gru-bob"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SYS_I2C_ROCKCHIP=y
@@ -53,6 +54,7 @@ CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=1
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_DM_ETH=y
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 27/49] rockchip: Enable building a SPI ROM image on jerry
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (25 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 26/49] rockchip: bob: Support SPI-flash booting Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 28/49] rockchip: Enable building a SPI ROM image on bob Simon Glass
` (21 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Add a simple binman config and enable CONFIG_HAS_ROM so that U-Boot
produces a ROM for jerry.
Change the binman image definition to support multiple images, since it
may be used to build both u-boot-rockchip.bin and u-boot.rom
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/dts/rk3288-u-boot.dtsi | 24 ++++++++++++++++++++++++
arch/arm/dts/rockchip-u-boot.dtsi | 8 +++++++-
arch/arm/mach-rockchip/rk3288/Kconfig | 1 +
3 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/rk3288-u-boot.dtsi b/arch/arm/dts/rk3288-u-boot.dtsi
index 6d31735362..104a5392bf 100644
--- a/arch/arm/dts/rk3288-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-u-boot.dtsi
@@ -12,6 +12,30 @@
};
};
+#ifdef CONFIG_HAS_ROM
+&binman {
+ rom {
+ filename = "u-boot.rom";
+ size = <0x400000>;
+ pad-byte = <0xff>;
+
+ mkimage {
+ args = "-n rk3288 -T rkspi";
+ u-boot-spl {
+ };
+ };
+ u-boot-img {
+ offset = <0x20000>;
+ };
+ u-boot {
+ offset = <0x300000>;
+ };
+ fdtmap {
+ };
+ };
+};
+#endif
+
&dmc {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index a2559e2db0..0451db735e 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -6,7 +6,13 @@
#include <config.h>
/ {
- binman {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ simple-bin {
filename = "u-boot-rockchip.bin";
pad-byte = <0xff>;
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index afb62fca78..dfc9da9238 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -5,6 +5,7 @@ choice
config TARGET_CHROMEBOOK_JERRY
bool "Google/Rockchip Veyron-Jerry Chromebook"
+ select HAS_ROM
select BOARD_LATE_INIT
help
Jerry is a RK3288-based clamshell device with 2 USB 3.0 ports,
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 28/49] rockchip: Enable building a SPI ROM image on bob
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (26 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 27/49] rockchip: Enable building a SPI ROM image on jerry Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 29/49] tegra: Drop the unused non-binman code Simon Glass
` (20 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Add a simple binman config and enable CONFIG_HAS_ROM so that U-Boot
produces a ROM for bob.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/dts/rk3399-gru-u-boot.dtsi | 4 ++++
arch/arm/dts/rk3399-gru.dtsi | 2 +-
arch/arm/dts/rk3399-u-boot.dtsi | 27 +++++++++++++++++++++++++++
arch/arm/mach-rockchip/rk3399/Kconfig | 1 +
4 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/rk3399-gru-u-boot.dtsi b/arch/arm/dts/rk3399-gru-u-boot.dtsi
index 7bddc3acdb..390ac2bb5a 100644
--- a/arch/arm/dts/rk3399-gru-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-gru-u-boot.dtsi
@@ -4,3 +4,7 @@
*/
#include "rk3399-u-boot.dtsi"
+
+&spi_flash {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi
index 7ac88392f2..f9c5bb607b 100644
--- a/arch/arm/dts/rk3399-gru.dtsi
+++ b/arch/arm/dts/rk3399-gru.dtsi
@@ -537,7 +537,7 @@ ap_i2c_audio: &i2c8 {
pinctrl-names = "default", "sleep";
pinctrl-1 = <&spi1_sleep>;
- spiflash at 0 {
+ spi_flash: spiflash at 0 {
compatible = "jedec,spi-nor";
reg = <0>;
diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
index 8237782408..a76bbea730 100644
--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -4,11 +4,14 @@
*/
#define USB_CLASS_HUB 9
+#include "rockchip-u-boot.dtsi"
+
/ {
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
pci0 = &pcie0;
+ spi1 = &spi1;
};
cic: syscon at ff620000 {
@@ -57,6 +60,30 @@
};
+#ifdef CONFIG_HAS_ROM
+&binman {
+ rom {
+ filename = "u-boot.rom";
+ size = <0x400000>;
+ pad-byte = <0xff>;
+
+ mkimage {
+ args = "-n rk3399 -T rkspi";
+ u-boot-spl {
+ };
+ };
+ u-boot-img {
+ offset = <0x40000>;
+ };
+ u-boot {
+ offset = <0x300000>;
+ };
+ fdtmap {
+ };
+ };
+};
+#endif
+
&cru {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index 254b9c5b4d..8b91d4713d 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -5,6 +5,7 @@ choice
config TARGET_CHROMEBOOK_BOB
bool "Asus Flip C101PA Chromebook (RK3399)"
+ select HAS_ROM
help
Bob is a small RK3299-based device similar in apperance to Minnie.
It has two USB 3.0 type-C ports, 4GB of SDRAM, WiFi and a 10.1",
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 29/49] tegra: Drop the unused non-binman code
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (27 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 28/49] rockchip: Enable building a SPI ROM image on bob Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-15 22:02 ` Stephen Warren
2020-06-14 2:57 ` [PATCH v2 30/49] tegra: Don't enable binman on ARMv8 SoCs Simon Glass
` (19 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
This has been in the Makefile long enough to ensure migration is complete.
Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 16 +---------------
1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/Makefile b/Makefile
index 07c237120d..fa5f556fb9 100644
--- a/Makefile
+++ b/Makefile
@@ -1639,23 +1639,9 @@ u-boot-x86-with-spl.bin: spl/u-boot-spl.bin u-boot.bin FORCE
$(call if_changed,binman)
ifneq ($(CONFIG_ARCH_TEGRA),)
-ifneq ($(CONFIG_BINMAN),)
# Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
-%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
- spl/%-spl %.bin FORCE
+%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: spl/%-spl %.bin FORCE
$(call if_changed,binman)
-else
-OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
-u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
- $(call if_changed,pad_cat)
-
-OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
-u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
- $(call if_changed,pad_cat)
-
-u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
- $(call if_changed,copy)
-endif # binman
endif
OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 30/49] tegra: Don't enable binman on ARMv8 SoCs
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (28 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 29/49] tegra: Drop the unused non-binman code Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y Simon Glass
` (18 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
At present only the ARMv7 tegra SoCs actually use binman to create an
image. Change the config to reflect this, since otherwise running binman
will produce an error.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/mach-tegra/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 00facf492e..e698373803 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -41,7 +41,6 @@ config TEGRA_PMC_SECURE
config TEGRA_COMMON
bool "Tegra common options"
- select BINMAN
select BOARD_EARLY_INIT_F
select CLK
select DM
@@ -70,6 +69,7 @@ config TEGRA_NO_BPMP
config TEGRA_ARMV7_COMMON
bool "Tegra 32-bit common options"
+ select BINMAN
select CPU_V7A
select SPL
select SPL_BOARD_INIT if SPL
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (29 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 30/49] tegra: Don't enable binman on ARMv8 SoCs Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed Simon Glass
` (17 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
When binman is in use, most of the targets built by the Makefile are
inputs to binman. We then need a final rule to run binman to produce the
final outputs.
Rename the variable to indicate this, and add a new 'inputs' target.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 60 +++++++++++++++++---------------
arch/arm/config.mk | 10 +++---
arch/arm/mach-at91/config.mk | 2 +-
arch/arm/mach-davinci/config.mk | 2 +-
arch/arm/mach-k3/config.mk | 10 +++---
arch/arm/mach-keystone/config.mk | 4 +--
arch/arm/mach-omap2/config.mk | 28 +++++++--------
arch/arm/mach-rmobile/Makefile | 2 +-
arch/arm/mach-stm32mp/config.mk | 4 +--
board/BuR/brppt1/config.mk | 4 +--
board/BuR/brppt2/config.mk | 4 +--
board/BuR/brsmarc1/config.mk | 6 ++--
board/imgtec/boston/config.mk | 2 +-
board/intel/edison/config.mk | 2 +-
scripts/Makefile.spl | 24 ++++++-------
tools/binman/README | 2 +-
16 files changed, 85 insertions(+), 81 deletions(-)
diff --git a/Makefile b/Makefile
index fa5f556fb9..875fbb1f1f 100644
--- a/Makefile
+++ b/Makefile
@@ -880,80 +880,80 @@ else
DO_STATIC_RELA =
endif
-# Always append ALL so that arch config.mk's can add custom ones
-ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
+# Always append INPUTS so that arch config.mk's can add custom ones
+INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
-ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
+INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
ifeq ($(CONFIG_SPL_FSL_PBL),y)
-ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
else
ifneq ($(CONFIG_SECURE_BOOT), y)
# For Secure Boot The Image needs to be signed and Header must also
# be included. So The image has to be built explicitly
-ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
+INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
endif
endif
-ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
-ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
-ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
-ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
endif
endif
-ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
-ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
+INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
+INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb
ifeq ($(CONFIG_SPL_FRAMEWORK),y)
-ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
+INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
endif
-ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
+INPUTS-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
ifneq ($(CONFIG_SPL_TARGET),)
-ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
+INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
endif
-ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
-ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
-ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
+INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
+INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
+INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
ifneq ($(CONFIG_HAS_ROM),)
ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
-ALL-y += u-boot.rom
+INPUTS-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
endif
endif
ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
-ALL-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
+INPUTS-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
endif
# Build a combined spl + u-boot image for sunxi
ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
-ALL-y += u-boot-sunxi-with-spl.bin
+INPUTS-y += u-boot-sunxi-with-spl.bin
endif
# enable combined SPL/u-boot/dtb rules for tegra
ifeq ($(CONFIG_ARCH_TEGRA)$(CONFIG_SPL),yy)
-ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
-ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
+INPUTS-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
+INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
endif
-ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
# Add optional build target if defined in board/cpu/soc headers
ifneq ($(CONFIG_BUILD_TARGET),)
-ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
+INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
endif
ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
-ALL-y += init_sp_bss_offset_check
+INPUTS-y += init_sp_bss_offset_check
endif
ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
-ALL-y += u-boot-with-dtb.bin
+INPUTS-y += u-boot-with-dtb.bin
endif
ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
-ALL-y += u-boot-rockchip.bin
+INPUTS-y += u-boot-rockchip.bin
endif
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
@@ -1010,7 +1010,11 @@ quiet_cmd_cfgcheck = CFGCHK $2
cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
$(srctree)/scripts/config_whitelist.txt $(srctree)
-all: $(ALL-y)
+PHONY += inputs
+inputs: $(INPUTS-y)
+
+all: inputs
+
ifeq ($(CONFIG_DEPRECATED),y)
$(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
ifeq ($(CONFIG_SPI),y)
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index f25603109e..4153f7e371 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -122,7 +122,7 @@ endif
ifneq ($(CONFIG_SPL_BUILD),y)
# Check that only R_ARM_RELATIVE relocations are generated.
-ALL-y += checkarmreloc
+INPUTS-y += checkarmreloc
# The movt / movw can hardcode 16 bit parts of the addresses in the
# instruction. Relocation is not supported for that case, so disable
# such usage by requiring word relocations.
@@ -154,17 +154,17 @@ endif
ifneq ($(CONFIG_IMX_CONFIG),)
ifdef CONFIG_SPL
ifndef CONFIG_SPL_BUILD
-ALL-y += SPL
+INPUTS-y += SPL
endif
else
ifeq ($(CONFIG_OF_SEPARATE),y)
-ALL-y += u-boot-dtb.imx
+INPUTS-y += u-boot-dtb.imx
else
-ALL-y += u-boot.imx
+INPUTS-y += u-boot.imx
endif
endif
ifneq ($(CONFIG_VF610),)
-ALL-y += u-boot.vyb
+INPUTS-y += u-boot.vyb
endif
endif
diff --git a/arch/arm/mach-at91/config.mk b/arch/arm/mach-at91/config.mk
index 9a023efb19..5426394651 100644
--- a/arch/arm/mach-at91/config.mk
+++ b/arch/arm/mach-at91/config.mk
@@ -4,6 +4,6 @@ endif
ifeq ($(CONFIG_CPU_V7A),y)
ifndef CONFIG_SPL_BUILD
-ALL-y += u-boot.img
+INPUTS-y += u-boot.img
endif
endif
diff --git a/arch/arm/mach-davinci/config.mk b/arch/arm/mach-davinci/config.mk
index 5a33982e2d..4674cae43b 100644
--- a/arch/arm/mach-davinci/config.mk
+++ b/arch/arm/mach-davinci/config.mk
@@ -2,5 +2,5 @@
#
# Copyright (C) 2012, Texas Instruments, Incorporated - http://www.ti.com/
ifndef CONFIG_SPL_BUILD
-ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.ais
+INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.ais
endif
diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
index f6b63db349..aca7a37009 100644
--- a/arch/arm/mach-k3/config.mk
+++ b/arch/arm/mach-k3/config.mk
@@ -44,7 +44,7 @@ tiboot3.bin: image_check FORCE
$(srctree)/tools/k3_gen_x509_cert.sh -c 16 -b $(obj)/u-boot-spl.bin \
-o $@ -l $(CONFIG_SPL_TEXT_BASE) -k $(KEY)
-ALL-y += tiboot3.bin
+INPUTS-y += tiboot3.bin
endif
ifdef CONFIG_ARM64
@@ -55,23 +55,23 @@ $(SPL_ITS): FORCE
$(srctree)/tools/k3_fit_atf.sh \
$(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) > $@
-ALL-y += tispl.bin_HS
+INPUTS-y += tispl.bin_HS
else
SPL_ITS := u-boot-spl-k3.its
$(SPL_ITS): FORCE
$(srctree)/tools/k3_fit_atf.sh \
$(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) > $@
-ALL-y += tispl.bin
+INPUTS-y += tispl.bin
endif
endif
else
ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-y += u-boot.img_HS
+INPUTS-y += u-boot.img_HS
else
-ALL-y += u-boot.img
+INPUTS-y += u-boot.img
endif
endif
diff --git a/arch/arm/mach-keystone/config.mk b/arch/arm/mach-keystone/config.mk
index 5806f8f5d1..5a16891f23 100644
--- a/arch/arm/mach-keystone/config.mk
+++ b/arch/arm/mach-keystone/config.mk
@@ -9,9 +9,9 @@ include $(srctree)/arch/arm/mach-omap2/config_secure.mk
ifndef CONFIG_SPL_BUILD
ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-y += u-boot_HS_MLO
+INPUTS-y += u-boot_HS_MLO
else
-ALL-y += MLO
+INPUTS-y += MLO
endif
endif
diff --git a/arch/arm/mach-omap2/config.mk b/arch/arm/mach-omap2/config.mk
index af455366ed..4f0d2598fa 100644
--- a/arch/arm/mach-omap2/config.mk
+++ b/arch/arm/mach-omap2/config.mk
@@ -18,9 +18,9 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y) # Refer to README.ti-secure for more info
# For booting spl from QSPI or NOR use
# u-boot-spl_HS_X-LOADER
ifeq ($(CONFIG_OMAP54XX),y)
-ALL-y += u-boot-spl_HS_MLO
-ALL-y += u-boot-spl_HS_ULO
-ALL-y += u-boot-spl_HS_X-LOADER
+INPUTS-y += u-boot-spl_HS_MLO
+INPUTS-y += u-boot-spl_HS_ULO
+INPUTS-y += u-boot-spl_HS_X-LOADER
endif
# On AM43XX:
#
@@ -30,8 +30,8 @@ endif
# For booting spl from all other media use
# u-boot-spl_HS_ISSW
ifeq ($(CONFIG_AM43XX),y)
-ALL-y += u-boot-spl_HS_SPI_X-LOADER
-ALL-y += u-boot-spl_HS_ISSW
+INPUTS-y += u-boot-spl_HS_SPI_X-LOADER
+INPUTS-y += u-boot-spl_HS_ISSW
endif
# On AM33XX:
#
@@ -47,21 +47,21 @@ endif
# For booting spl over UART, USB, or Ethernet use
# u-boot-spl_HS_2ND
ifeq ($(CONFIG_AM33XX),y)
-ALL-y += u-boot-spl_HS_SPI_X-LOADER
-ALL-y += u-boot-spl_HS_X-LOADER
-ALL-y += u-boot-spl_HS_MLO
-ALL-y += u-boot-spl_HS_2ND
+INPUTS-y += u-boot-spl_HS_SPI_X-LOADER
+INPUTS-y += u-boot-spl_HS_X-LOADER
+INPUTS-y += u-boot-spl_HS_MLO
+INPUTS-y += u-boot-spl_HS_2ND
endif
else
-ALL-y += MLO
+INPUTS-y += MLO
ifeq ($(CONFIG_AM33XX),y)
-ALL-y += MLO.byteswap
+INPUTS-y += MLO.byteswap
endif
endif
else
ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
-ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
+INPUTS-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
+INPUTS-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
endif
-ALL-y += u-boot.img
+INPUTS-y += u-boot.img
endif
diff --git a/arch/arm/mach-rmobile/Makefile b/arch/arm/mach-rmobile/Makefile
index a3fdcc3bc0..3206bce722 100644
--- a/arch/arm/mach-rmobile/Makefile
+++ b/arch/arm/mach-rmobile/Makefile
@@ -84,5 +84,5 @@ spl/u-boot-spl.scif: spl/u-boot-spl.srec spl/u-boot-spl.bin
# if srec_cat is present build u-boot-spl.scif by default
has_srec_cat = $(call try-run,srec_cat -VERSion,y,n)
-ALL-$(has_srec_cat) += u-boot-spl.scif
+INPUTS-$(has_srec_cat) += u-boot-spl.scif
CLEAN_FILES += u-boot-spl.scif
diff --git a/arch/arm/mach-stm32mp/config.mk b/arch/arm/mach-stm32mp/config.mk
index 403af2a225..c30bf482f7 100644
--- a/arch/arm/mach-stm32mp/config.mk
+++ b/arch/arm/mach-stm32mp/config.mk
@@ -4,10 +4,10 @@
#
ifndef CONFIG_SPL
-ALL-y += u-boot.stm32
+INPUTS-y += u-boot.stm32
else
ifdef CONFIG_SPL_BUILD
-ALL-y += u-boot-spl.stm32
+INPUTS-y += u-boot-spl.stm32
endif
endif
diff --git a/board/BuR/brppt1/config.mk b/board/BuR/brppt1/config.mk
index b11b544c37..6853135f83 100644
--- a/board/BuR/brppt1/config.mk
+++ b/board/BuR/brppt1/config.mk
@@ -25,8 +25,8 @@ cmd_prodzip = \
zip -9 -r $@ misc/* >/dev/null $<
ifeq ($(hw-platform-y),brppt1-spi)
-ALL-y += $(hw-platform-y)_prog.bin
-ALL-y += $(hw-platform-y)_prod.zip
+INPUTS-y += $(hw-platform-y)_prog.bin
+INPUTS-y += $(hw-platform-y)_prod.zip
endif
$(hw-platform-y)_prog.bin: u-boot-dtb.img spl/u-boot-spl.bin
diff --git a/board/BuR/brppt2/config.mk b/board/BuR/brppt2/config.mk
index fa973db762..0d1638a97a 100644
--- a/board/BuR/brppt2/config.mk
+++ b/board/BuR/brppt2/config.mk
@@ -24,8 +24,8 @@ cmd_prodzip = \
ifeq ($(hw-platform-y),brppt2)
ifneq ($(CONFIG_SPL_BUILD),y)
-ALL-y += $(hw-platform-y)_prog.bin
-ALL-y += $(hw-platform-y)_prod.zip
+INPUTS-y += $(hw-platform-y)_prog.bin
+INPUTS-y += $(hw-platform-y)_prod.zip
endif
endif
diff --git a/board/BuR/brsmarc1/config.mk b/board/BuR/brsmarc1/config.mk
index 0692988507..1de971876c 100644
--- a/board/BuR/brsmarc1/config.mk
+++ b/board/BuR/brsmarc1/config.mk
@@ -23,11 +23,11 @@ cmd_prodzip = \
cp u-boot-dtb.img misc/ && \
zip -9 -r $@ misc/* >/dev/null $<
-ALL-y += $(hw-platform-y)_prog.bin
-ALL-y += $(hw-platform-y)_prod.zip
+INPUTS-y += $(hw-platform-y)_prog.bin
+INPUTS-y += $(hw-platform-y)_prod.zip
$(hw-platform-y)_prog.bin: u-boot-dtb.img spl/u-boot-spl.bin
$(call if_changed,prodbin)
$(hw-platform-y)_prod.zip: $(hw-platform-y)_prog.bin
- $(call if_changed,prodzip)
\ No newline@end of file
+ $(call if_changed,prodzip)
diff --git a/board/imgtec/boston/config.mk b/board/imgtec/boston/config.mk
index 8cfc9c6894..c1e242f108 100644
--- a/board/imgtec/boston/config.mk
+++ b/board/imgtec/boston/config.mk
@@ -11,5 +11,5 @@ u-boot.mcs: u-boot.bin
# if srec_cat is present build u-boot.mcs by default
has_srec_cat = $(call try-run,srec_cat -VERSion,y,n)
-ALL-$(has_srec_cat) += u-boot.mcs
+INPUTS-$(has_srec_cat) += u-boot.mcs
CLEAN_FILES += u-boot.mcs
diff --git a/board/intel/edison/config.mk b/board/intel/edison/config.mk
index fdcbbdf3b1..8c6087e290 100644
--- a/board/intel/edison/config.mk
+++ b/board/intel/edison/config.mk
@@ -10,7 +10,7 @@ cmd_mkalign_eds = \
dd if=$^ of=$@ bs=4k seek=1 2>/dev/null && \
mv $@ $^
-ALL-y += u-boot-align.bin
+INPUTS-y += u-boot-align.bin
u-boot-align.bin: u-boot.bin
$(call if_changed,mkalign_eds)
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index e6d56a1286..d528c994ff 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -213,42 +213,42 @@ spl/boot.bin: $(obj)/$(SPL_BIN)-align.bin FORCE
$(call if_changed,mkimage)
endif
-ALL-y += $(obj)/$(SPL_BIN).bin
+INPUTS-y += $(obj)/$(SPL_BIN).bin
ifdef CONFIG_SAMSUNG
-ALL-y += $(obj)/$(BOARD)-spl.bin
+INPUTS-y += $(obj)/$(BOARD)-spl.bin
endif
ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
-ALL-y += $(obj)/$(SPL_BIN).sfp
+INPUTS-y += $(obj)/$(SPL_BIN).sfp
endif
ifdef CONFIG_ARCH_SUNXI
-ALL-y += $(obj)/sunxi-spl.bin
+INPUTS-y += $(obj)/sunxi-spl.bin
ifdef CONFIG_NAND_SUNXI
-ALL-y += $(obj)/sunxi-spl-with-ecc.bin
+INPUTS-y += $(obj)/sunxi-spl-with-ecc.bin
endif
endif
ifeq ($(CONFIG_SYS_SOC),"at91")
-ALL-y += $(obj)/boot.bin
+INPUTS-y += $(obj)/boot.bin
endif
ifdef CONFIG_TPL_BUILD
-ALL-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
+INPUTS-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
$(obj)/u-boot-x86-reset16-tpl.bin
else
-ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
+INPUTS-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
$(obj)/u-boot-x86-reset16-spl.bin
endif
-ALL-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin
-ALL-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin
+INPUTS-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin
+INPUTS-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin
-ALL-$(CONFIG_ARCH_MEDIATEK) += $(obj)/u-boot-spl-mtk.bin
+INPUTS-$(CONFIG_ARCH_MEDIATEK) += $(obj)/u-boot-spl-mtk.bin
-all: $(ALL-y)
+all: $(INPUTS-y)
quiet_cmd_cat = CAT $@
cmd_cat = cat $(filter-out $(PHONY), $^) > $@
diff --git a/tools/binman/README b/tools/binman/README
index a6a3ee48aa..37ee3fc2d3 100644
--- a/tools/binman/README
+++ b/tools/binman/README
@@ -220,7 +220,7 @@ u-boot-<your_suffix>.bin: <input_file_1> <input_file_2> checkbinman FORCE
endif
This assumes that u-boot-<your_suffix>.bin is a target, and is the final file
-that you need to produce. You can make it a target by adding it to ALL-y
+that you need to produce. You can make it a target by adding it to INPUTS-y
either in the main Makefile or in a config.mk file in your arch subdirectory.
Once binman is executed it will pick up its instructions from a device-tree
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (30 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman Simon Glass
` (16 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Quite a few boards using this SoC family don't use binman, yet
CONFIG_BINMAN is enabled for all of them. But the option should only be
enabled if we expect binman to produce an image. Calling binman when the
device tree is missing, etc. will cause failer.
Add a condition so that CONFIG_BINMAN is only enabled as needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/powerpc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c2c577f60c..6a2e88fed2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -20,7 +20,7 @@ config MPC85xx
select CREATE_ARCH_SYMLINK
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
- select BINMAN
+ select BINMAN if OF_SEPARATE
imply CMD_HASH
imply CMD_IRQ
imply USB_EHCI_HCD if USB
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (31 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM Simon Glass
` (15 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
On x86 various files that need to be created by binman. It does not make
sense to enumerate these in the Makefile. They are described in the
configuration (devicetree) for each board and we can simply run binman
(always) to generate them.
Update the Makefile to have a separate, final step which runs binman,
once all input dependencies are present.
This avoid sprinkling the Makefile with arch-specific code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 63 ++++++++-----------------------
arch/arm/dts/rockchip-u-boot.dtsi | 2 +
2 files changed, 17 insertions(+), 48 deletions(-)
diff --git a/Makefile b/Makefile
index 875fbb1f1f..9c15dced7d 100644
--- a/Makefile
+++ b/Makefile
@@ -916,16 +916,6 @@ INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
-ifneq ($(CONFIG_HAS_ROM),)
-ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
-INPUTS-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
-endif
-endif
-
-ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
-INPUTS-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
-endif
-
# Build a combined spl + u-boot image for sunxi
ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
INPUTS-y += u-boot-sunxi-with-spl.bin
@@ -953,9 +943,13 @@ INPUTS-y += u-boot-with-dtb.bin
endif
ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
-INPUTS-y += u-boot-rockchip.bin
+INPUTS-y += u-boot-rockchip.bin idbloader.img
endif
+INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
+ $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+ $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
+
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
@@ -1013,7 +1007,14 @@ cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
PHONY += inputs
inputs: $(INPUTS-y)
-all: inputs
+all: .binman_stamp inputs
+ifeq ($(CONFIG_BINMAN),y)
+ $(call if_changed,binman)
+endif
+
+# Timestamp file to make sure that binman always runs
+.binman_stamp: FORCE
+ @touch $@
ifeq ($(CONFIG_DEPRECATED),y)
$(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
@@ -1306,7 +1307,7 @@ quiet_cmd_binman = BINMAN $@
cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
--toolpath $(objtree)/tools \
$(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
- build -u -d u-boot.dtb -O . -m \
+ build -u -d u-boot.dtb -O . -m --allow-missing \
-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
$(BINMAN_$(@F))
@@ -1583,27 +1584,11 @@ u-boot-br.bin: u-boot FORCE
endif
endif
-# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
-# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
-# the middle. This is handled by binman based on an image description in the
-# board's device tree.
-ifneq ($(CONFIG_HAS_ROM),)
-rom: u-boot.rom FORCE
-
-refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
- $(call if_changed,copy)
-
quiet_cmd_ldr = LD $@
cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
$(filter-out FORCE,$^) -o $@
-rom-deps := u-boot.bin
ifdef CONFIG_X86
-rom-deps += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
- $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
- $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
- $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
-
OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
u-boot-x86-start16.bin: u-boot FORCE
$(call if_changed,objcopy)
@@ -1612,22 +1597,7 @@ OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
u-boot-x86-reset16.bin: u-boot FORCE
$(call if_changed,objcopy)
-else # !CONFIG_X86
-
-ifdef CONFIG_SPL
-rom-deps += spl/u-boot-spl.bin
-rom-deps += u-boot.img
-endif
-
-ifdef CONFIG_TPL
-rom-deps += tpl/u-boot-tpl.bin
-endif
-
-endif
-
-u-boot.rom: $(rom-deps) FORCE
- $(call if_changed,binman)
-endif
+endif # CONFIG_X86
ifneq ($(CONFIG_ARCH_SUNXI),)
ifeq ($(CONFIG_ARM64),)
@@ -1639,9 +1609,6 @@ u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
endif
endif
-u-boot-x86-with-spl.bin: spl/u-boot-spl.bin u-boot.bin FORCE
- $(call if_changed,binman)
-
ifneq ($(CONFIG_ARCH_TEGRA),)
# Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: spl/%-spl %.bin FORCE
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index 0451db735e..eae3ee715d 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -11,6 +11,7 @@
};
};
+#ifdef CONFIG_SPL
&binman {
simple-bin {
filename = "u-boot-rockchip.bin";
@@ -25,3 +26,4 @@
};
};
};
+#endif
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (32 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman Simon Glass
` (14 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
This Kconfig is not needed anymore since U-Boot will build the ROM if the
required binary blobs exist.
The BUILD_ROM environment variable used to request that the ROM be built.
Now this always happens if the required binary blobs are available. Update
it to mean that U-Boot should fail if the ROM cannot be built. This
behaviour should be compatible with how it used to work.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Kconfig | 7 +++++--
Makefile | 3 ++-
configs/qemu-x86_64_defconfig | 1 -
configs/qemu-x86_defconfig | 1 -
4 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Kconfig b/Kconfig
index 876c5db911..352b2d4584 100644
--- a/Kconfig
+++ b/Kconfig
@@ -252,8 +252,11 @@ config ROM_NEEDS_BLOBS
depends on HAS_ROM
help
Enable this if building the u-boot.rom target needs binary blobs, and
- so cannot be done normally. In this case, pass BUILD_ROM=1 to make
- to tell U-Boot to build the ROM.
+ so cannot be done normally. In this case, U-Boot will only build the
+ ROM if the required blobs exist. If not, you will see an warning like:
+
+ Image 'main-section' is missing external blobs and is non-functional:
+ intel-descriptor intel-me intel-refcode intel-vga intel-mrc
config BUILD_ROM
bool "Build U-Boot as BIOS replacement"
diff --git a/Makefile b/Makefile
index 9c15dced7d..e4fed83cb2 100644
--- a/Makefile
+++ b/Makefile
@@ -1307,7 +1307,8 @@ quiet_cmd_binman = BINMAN $@
cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
--toolpath $(objtree)/tools \
$(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
- build -u -d u-boot.dtb -O . -m --allow-missing \
+ build -u -d u-boot.dtb -O . \
+ $(if $(BUILD_ROM),,-m --allow-missing) \
-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
$(BINMAN_$(@F))
diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig
index 90d287b7b0..1a03a96223 100644
--- a/configs/qemu-x86_64_defconfig
+++ b/configs/qemu-x86_64_defconfig
@@ -16,7 +16,6 @@ CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_X86_OFFSET_U_BOOT=0xfff00000
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BUILD_ROM=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_BOOTSTAGE=y
diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig
index 4309c2352d..f0e8e7d967 100644
--- a/configs/qemu-x86_defconfig
+++ b/configs/qemu-x86_defconfig
@@ -8,7 +8,6 @@ CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BUILD_ROM=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (33 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 36/49] tegra: " Simon Glass
` (13 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
On sunxi various files that need to be created by binman. It does not make
sense to enumerate these in the Makefile. They are described in the
configuration (devicetree) for each board and we can simply run binman
(always) to generate them.
This avoid sprinkling the Makefile with arch-specific code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/Makefile b/Makefile
index e4fed83cb2..ac628cc772 100644
--- a/Makefile
+++ b/Makefile
@@ -917,7 +917,7 @@ INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
# Build a combined spl + u-boot image for sunxi
-ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
+ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64)$(CONFIG_SPL),yyy)
INPUTS-y += u-boot-sunxi-with-spl.bin
endif
@@ -1601,10 +1601,7 @@ u-boot-x86-reset16.bin: u-boot FORCE
endif # CONFIG_X86
ifneq ($(CONFIG_ARCH_SUNXI),)
-ifeq ($(CONFIG_ARM64),)
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
- $(call if_changed,binman)
-else
+ifeq ($(CONFIG_ARM64),y)
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
$(call if_changed,cat)
endif
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 36/49] tegra: Makefile: Drop explicit targets built by binman
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (34 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 37/49] mediatek: " Simon Glass
` (12 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
On tegra various files that need to be created by binman. It does not make
sense to enumerate these in the Makefile. They are described in the
configuration (devicetree) for each board and we can simply run binman
(always) to generate them.
This avoid sprinkling the Makefile with arch-specific code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/Makefile b/Makefile
index ac628cc772..19c6ca53f7 100644
--- a/Makefile
+++ b/Makefile
@@ -921,12 +921,6 @@ ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64)$(CONFIG_SPL),yyy)
INPUTS-y += u-boot-sunxi-with-spl.bin
endif
-# enable combined SPL/u-boot/dtb rules for tegra
-ifeq ($(CONFIG_ARCH_TEGRA)$(CONFIG_SPL),yy)
-INPUTS-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
-INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
-endif
-
INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
# Add optional build target if defined in board/cpu/soc headers
@@ -1607,12 +1601,6 @@ u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
endif
endif
-ifneq ($(CONFIG_ARCH_TEGRA),)
-# Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
-%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: spl/%-spl %.bin FORCE
- $(call if_changed,binman)
-endif
-
OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
u-boot-app.efi: u-boot FORCE
$(call if_changed,zobjcopy)
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 37/49] mediatek: Makefile: Drop explicit targets built by binman
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (35 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 36/49] tegra: " Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 38/49] rockchip: " Simon Glass
` (11 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
On mediatek various files that need to be created by binman. It does not
make sense to enumerate these in the Makefile. They are described in the
configuration (devicetree) for each board and we can simply run binman
(always) to generate them.
This avoid sprinkling the Makefile with arch-specific code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 19c6ca53f7..96ab26a638 100644
--- a/Makefile
+++ b/Makefile
@@ -921,7 +921,10 @@ ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64)$(CONFIG_SPL),yyy)
INPUTS-y += u-boot-sunxi-with-spl.bin
endif
+# Generate this input file for binman
+ifeq ($(CONFIG_SPL),)
INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+endif
# Add optional build target if defined in board/cpu/soc headers
ifneq ($(CONFIG_BUILD_TARGET),)
@@ -1684,9 +1687,6 @@ u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
ifeq ($(CONFIG_SPL),y)
spl/u-boot-spl-mtk.bin: spl/u-boot-spl
-
-u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
- $(call if_changed,binman)
else
MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 38/49] rockchip: Makefile: Drop explicit targets built by binman
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (36 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 37/49] mediatek: " Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later Simon Glass
` (10 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
On rockchip various files that need to be created by binman. It does not
make sense to enumerate these in the Makefile. They are described in the
configuration (devicetree) for each board and we can simply run binman
(always) to generate them.
This avoid sprinkling the Makefile with arch-specific code.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/Makefile b/Makefile
index 96ab26a638..7009eb7be7 100644
--- a/Makefile
+++ b/Makefile
@@ -939,8 +939,19 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
INPUTS-y += u-boot-with-dtb.bin
endif
-ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
-INPUTS-y += u-boot-rockchip.bin idbloader.img
+ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
+# On ARM64 this target is produced by binman so we don't need this dep
+ifeq ($(CONFIG_ARM64),y)
+ifeq ($(CONFIG_SPL),y)
+# TODO: Get binman to generate this too
+INPUTS-y += u-boot-rockchip.bin
+endif
+else
+ifeq ($(CONFIG_SPL),y)
+# Generate these inputs for binman which will create the output files
+INPUTS-y += idbloader.img u-boot.img
+endif
+endif
endif
INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
@@ -1457,10 +1468,7 @@ idbloader.img: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
endif
-ifeq ($(CONFIG_ARM64),)
-u-boot-rockchip.bin: idbloader.img u-boot.img FORCE
- $(call if_changed,binman)
-else
+ifeq ($(CONFIG_ARM64),y)
OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (37 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 38/49] rockchip: " Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage Simon Glass
` (9 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
At present this is checked before the config has been loaded by the
Makefile, so it doesn't work.
Move the check to later.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 7009eb7be7..c3fe2cb8a5 100644
--- a/Makefile
+++ b/Makefile
@@ -278,7 +278,7 @@ HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
HOSTCC = cc
HOSTCXX = c++
KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
- $(if $(CONFIG_TOOLS_DEBUG),-g) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
+ $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
@@ -732,6 +732,8 @@ KBUILD_CPPFLAGS += $(KCPPFLAGS)
KBUILD_AFLAGS += $(KAFLAGS)
KBUILD_CFLAGS += $(KCFLAGS)
+KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
+
# Use UBOOTINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
UBOOTINCLUDE := \
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (38 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 41/49] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty Simon Glass
` (8 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Fix this line which is over the limit.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index c3fe2cb8a5..6e0fbfe8d3 100644
--- a/Makefile
+++ b/Makefile
@@ -994,7 +994,8 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
+ -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_cat = CAT $@
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 41/49] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (39 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR Simon Glass
` (7 subsequent siblings)
48 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
At present we use the empty string to indicate that there is no FIT
generator, but this doesn't allow an individual board to undefine it.
Create a separate bool instead.
Update the config of the boards which currently have an empty string.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Kconfig | 6 +++++-
Makefile | 2 +-
configs/am335x_evm_defconfig | 1 +
configs/am335x_hs_evm_defconfig | 1 +
configs/am335x_hs_evm_uart_defconfig | 1 +
configs/am43xx_evm_defconfig | 1 +
configs/am43xx_evm_rtconly_defconfig | 1 +
configs/am43xx_evm_usbhost_boot_defconfig | 1 +
configs/am43xx_hs_evm_defconfig | 1 +
configs/am57xx_evm_defconfig | 1 +
configs/am57xx_hs_evm_defconfig | 1 +
configs/am57xx_hs_evm_usb_defconfig | 1 +
configs/am65x_evm_a53_defconfig | 1 +
configs/am65x_evm_r5_defconfig | 1 +
configs/am65x_hs_evm_a53_defconfig | 1 +
configs/am65x_hs_evm_r5_defconfig | 1 +
configs/dh_imx6_defconfig | 1 +
configs/display5_defconfig | 1 +
configs/display5_factory_defconfig | 1 +
configs/dra7xx_evm_defconfig | 1 +
configs/dra7xx_hs_evm_defconfig | 1 +
configs/dra7xx_hs_evm_usb_defconfig | 1 +
configs/imx6qdl_icore_mipi_defconfig | 1 +
configs/imx6qdl_icore_mmc_defconfig | 1 +
configs/imx6qdl_icore_rqs_defconfig | 1 +
configs/j721e_evm_a72_defconfig | 1 +
configs/j721e_evm_r5_defconfig | 1 +
configs/j721e_hs_evm_a72_defconfig | 1 +
configs/j721e_hs_evm_r5_defconfig | 1 +
configs/ls1046ardb_qspi_spl_defconfig | 1 +
configs/mccmon6_nor_defconfig | 1 +
configs/mccmon6_sd_defconfig | 1 +
configs/mx6sabreauto_defconfig | 1 +
configs/mx6sabresd_defconfig | 1 +
configs/pico-imx6_defconfig | 1 +
configs/qemu-x86_64_defconfig | 1 +
configs/sandbox_spl_defconfig | 1 +
configs/socfpga_arria10_defconfig | 1 +
configs/stm32mp15_dhcom_basic_defconfig | 1 +
configs/stm32mp15_dhcor_basic_defconfig | 1 +
configs/wandboard_defconfig | 1 +
configs/xilinx_zynq_virt_defconfig | 1 +
42 files changed, 46 insertions(+), 2 deletions(-)
diff --git a/Kconfig b/Kconfig
index 352b2d4584..a548de43fb 100644
--- a/Kconfig
+++ b/Kconfig
@@ -544,9 +544,13 @@ config SPL_FIT_SOURCE
U-Boot FIT image. This could specify further image to load and/or
execute.
+config USE_SPL_FIT_GENERATOR
+ bool "Use a script to generate the .its script"
+ default y if SPL_FIT
+
config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
- depends on SPL_FIT
+ depends on USE_SPL_FIT_GENERATOR
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
diff --git a/Makefile b/Makefile
index 6e0fbfe8d3..f3c19195b4 100644
--- a/Makefile
+++ b/Makefile
@@ -1345,7 +1345,7 @@ U_BOOT_ITS := u-boot.its
$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
$(call if_changed,copy)
else
-ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
+ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
U_BOOT_ITS := u-boot.its
ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
U_BOOT_ITS_DEPS += u-boot-nodtb.bin
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 8d8276ba56..0927f3036a 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -6,6 +6,7 @@ CONFIG_AM33XX=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_LOGLEVEL=3
diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
index 393665fcf3..ee55fd6e8f 100644
--- a/configs/am335x_hs_evm_defconfig
+++ b/configs/am335x_hs_evm_defconfig
@@ -10,6 +10,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_LOGLEVEL=3
diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig
index a8afad9e0b..91c7d00909 100644
--- a/configs/am335x_hs_evm_uart_defconfig
+++ b/configs/am335x_hs_evm_uart_defconfig
@@ -13,6 +13,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_LOGLEVEL=3
diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index 075c09b626..6e750ff7eb 100644
--- a/configs/am43xx_evm_defconfig
+++ b/configs/am43xx_evm_defconfig
@@ -10,6 +10,7 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/am43xx_evm_rtconly_defconfig b/configs/am43xx_evm_rtconly_defconfig
index a0a6661e40..1a0c7188e6 100644
--- a/configs/am43xx_evm_rtconly_defconfig
+++ b/configs/am43xx_evm_rtconly_defconfig
@@ -10,6 +10,7 @@ CONFIG_SPL_RTC_DDR_SUPPORT=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
index db48785f91..c7c93073ae 100644
--- a/configs/am43xx_evm_usbhost_boot_defconfig
+++ b/configs/am43xx_evm_usbhost_boot_defconfig
@@ -9,6 +9,7 @@ CONFIG_AM43XX=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index 523ce00585..2e162b4efa 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -18,6 +18,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 42942e9ed4..94948ec2ea 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL_TEXT_BASE=0x40300000
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index f80ec38004..ec0284536c 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -21,6 +21,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig
index 3b155cc202..5f6e13031d 100644
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
index d74a2d0930..439fdca219 100644
--- a/configs/am65x_evm_a53_defconfig
+++ b/configs/am65x_evm_a53_defconfig
@@ -24,6 +24,7 @@ CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
CONFIG_CONSOLE_MUX=y
diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig
index 4fc199e809..2089fd3362 100644
--- a/configs/am65x_evm_r5_defconfig
+++ b/configs/am65x_evm_r5_defconfig
@@ -22,6 +22,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_TEXT_BASE=0x41c00000
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig
index 117953817d..2f152e99d9 100644
--- a/configs/am65x_hs_evm_a53_defconfig
+++ b/configs/am65x_hs_evm_a53_defconfig
@@ -27,6 +27,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_fit_${boot}; run get_overlaystring; run run_fit"
CONFIG_CONSOLE_MUX=y
diff --git a/configs/am65x_hs_evm_r5_defconfig b/configs/am65x_hs_evm_r5_defconfig
index b2d638672e..2e1fe9fb9c 100644
--- a/configs/am65x_hs_evm_r5_defconfig
+++ b/configs/am65x_hs_evm_r5_defconfig
@@ -24,6 +24,7 @@ CONFIG_SPL_TEXT_BASE=0x41c00000
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
index d20405e5b2..bd585efe90 100644
--- a/configs/dh_imx6_defconfig
+++ b/configs/dh_imx6_defconfig
@@ -25,6 +25,7 @@ CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_SPL_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
diff --git a/configs/display5_defconfig b/configs/display5_defconfig
index 700bdcbd17..fe35f39021 100644
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@@ -28,6 +28,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_SUPPORT_RAW_INITRD=y
diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig
index 39f31687b4..67831dff44 100644
--- a/configs/display5_factory_defconfig
+++ b/configs/display5_factory_defconfig
@@ -25,6 +25,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_BOOTDELAY=3
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index e4547d9dcc..75dbfde540 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL_TEXT_BASE=0x40300000
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index c08bcce903..872de5fb4b 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -21,6 +21,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig
index 879c2b650b..3f900fc586 100644
--- a/configs/dra7xx_hs_evm_usb_defconfig
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig
index 5e8fc9dcaa..138c141f88 100644
--- a/configs/imx6qdl_icore_mipi_defconfig
+++ b/configs/imx6qdl_icore_mipi_defconfig
@@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 85151f47fa..84525329b2 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -23,6 +23,7 @@ CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index 5f356b2d06..5eac0d16a6 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -17,6 +17,7 @@ CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
index 4deb4e219f..3e8001c533 100644
--- a/configs/j721e_evm_a72_defconfig
+++ b/configs/j721e_evm_a72_defconfig
@@ -25,6 +25,7 @@ CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig
index ee9217aee2..e337c7ed43 100644
--- a/configs/j721e_evm_r5_defconfig
+++ b/configs/j721e_evm_r5_defconfig
@@ -21,6 +21,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_TEXT_BASE=0x41c00000
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_BOARD_INIT=y
diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig
index ae540a26a4..575e45ea3c 100644
--- a/configs/j721e_hs_evm_a72_defconfig
+++ b/configs/j721e_hs_evm_a72_defconfig
@@ -26,6 +26,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit"
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
diff --git a/configs/j721e_hs_evm_r5_defconfig b/configs/j721e_hs_evm_r5_defconfig
index 51d5a3bb98..82c6686612 100644
--- a/configs/j721e_hs_evm_r5_defconfig
+++ b/configs/j721e_hs_evm_r5_defconfig
@@ -24,6 +24,7 @@ CONFIG_SPL_TEXT_BASE=0x41c00000
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index cbc598dea8..f95c3a3af3 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -19,6 +19,7 @@ CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_QSPI_BOOT=y
CONFIG_BOOTDELAY=10
diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig
index 9e18fb3de0..946233d8ee 100644
--- a/configs/mccmon6_nor_defconfig
+++ b/configs/mccmon6_nor_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_BOARD_LATE_INIT=y
diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig
index c7a00e4651..1470632939 100644
--- a/configs/mccmon6_sd_defconfig
+++ b/configs/mccmon6_sd_defconfig
@@ -17,6 +17,7 @@ CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_BOARD_LATE_INIT=y
diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig
index 5304050ce3..7c39d68bc8 100644
--- a/configs/mx6sabreauto_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -19,6 +19,7 @@ CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index 2a517cc1f3..c9d2414888 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig
index 0bc7e4fc95..dbc1989a45 100644
--- a/configs/pico-imx6_defconfig
+++ b/configs/pico-imx6_defconfig
@@ -18,6 +18,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run default_boot"
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig
index 1a03a96223..7f159e0db5 100644
--- a/configs/qemu-x86_64_defconfig
+++ b/configs/qemu-x86_64_defconfig
@@ -18,6 +18,7 @@ CONFIG_X86_OFFSET_U_BOOT=0xfff00000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index fc8b26e88c..6792b97b8b 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -13,6 +13,7 @@ CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
index 35ae18fac0..ed0b3213a2 100644
--- a/configs/socfpga_arria10_defconfig
+++ b/configs/socfpga_arria10_defconfig
@@ -11,6 +11,7 @@ CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
# CONFIG_USE_BOOTCOMMAND is not set
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index 6106572673..84cc3f63f5 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index 249646c449..934651067d 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig
index 733b4e82ed..5fbfaf5101 100644
--- a/configs/wandboard_defconfig
+++ b/configs/wandboard_defconfig
@@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
# CONFIG_CONSOLE_MUX is not set
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index 5da7440af2..59b0e36510 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -14,6 +14,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_USE_PREBOOT=y
CONFIG_SPL_STACK_R=y
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (40 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 41/49] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman Simon Glass
` (6 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
This option is used to run arch-specific shell scripts which produce .its
files which are used to produce FIT images. We already have binman which
is designed to produce firmware images. It is more powerful and has tests.
So this option should be deprecated and not used. Existing uses should be
migrated.
Mentions of this in code reviews over the last year or so do not seem to
have resulted in action, and things are getting worse.
So let's add a warning.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Makefile b/Makefile
index f3c19195b4..98172a40d8 100644
--- a/Makefile
+++ b/Makefile
@@ -1143,6 +1143,13 @@ ifneq ($(CONFIG_DM_ETH),y)
@echo >&2 "See doc/driver-model/migration.rst for more info."
@echo >&2 "===================================================="
endif
+endif
+ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
+ @echo >&2 "to binman instead, to avoid the proliferation of"
+ @echo >&2 "arch-specific scripts with no tests."
+ @echo >&2 "===================================================="
endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
@@ -1340,6 +1347,8 @@ endif
# Boards with more complex image requirements can provide an .its source file
# or a generator script
+# NOTE: Please do not use this. We are migrating away from Makefile rules to use
+# binman instead.
ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
U_BOOT_ITS := u-boot.its
$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (41 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-07-07 11:56 ` Kever Yang
2020-07-08 1:03 ` Kever Yang
2020-06-14 2:57 ` [PATCH v2 44/49] rockchip: Convert evb-rk3229 " Simon Glass
` (5 subsequent siblings)
48 siblings, 2 replies; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
At present this board uses a custom script to produce the .its file.
Update it to use binman instead. Binman can create all the images that
are needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Kconfig | 2 +-
arch/arm/dts/rk322x-u-boot.dtsi | 72 +++++++++++++++++++++++++++++++++
arch/arm/dts/rk322x.dtsi | 1 +
arch/arm/dts/rk3288-u-boot.dtsi | 1 +
configs/evb-rk3288_defconfig | 2 +-
5 files changed, 76 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/dts/rk322x-u-boot.dtsi
diff --git a/Kconfig b/Kconfig
index a548de43fb..6e874709a6 100644
--- a/Kconfig
+++ b/Kconfig
@@ -285,7 +285,7 @@ config BUILD_TARGET
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
- default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+ default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
default "u-boot.kwb" if ARCH_KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
diff --git a/arch/arm/dts/rk322x-u-boot.dtsi b/arch/arm/dts/rk322x-u-boot.dtsi
new file mode 100644
index 0000000000..5a18816d5e
--- /dev/null
+++ b/arch/arm/dts/rk322x-u-boot.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#ifdef CONFIG_SPL_OPTEE
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+#include <config.h>
+
+&binman {
+ itb {
+ filename = "u-boot.itb";
+ fit {
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ description = "FIT image with OP-TEE support";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ description = "U-Boot";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm";
+ compression = "none";
+ load = <CONFIG_SYS_TEXT_BASE>;
+
+ u-boot-nodtb {
+ };
+ };
+ optee {
+ description = "OP-TEE";
+ type = "firmware";
+ arch = "arm";
+ os = "tee";
+ compression = "none";
+ load = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+ entry = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+
+ blob-ext {
+ filename = "tee.bin";
+ };
+ };
+ fdt {
+ description = CONFIG_SYS_BOARD;
+ type = "flat_dt";
+ compression = "none";
+
+ u-boot-dtb {
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+ conf {
+ description = CONFIG_SYS_BOARD;
+ firmware = "optee";
+ loadables = "uboot";
+ fdt = "fdt";
+ };
+ };
+ };
+ };
+};
+
+#endif
diff --git a/arch/arm/dts/rk322x.dtsi b/arch/arm/dts/rk322x.dtsi
index 4a8be5dabb..1a2e8d1b99 100644
--- a/arch/arm/dts/rk322x.dtsi
+++ b/arch/arm/dts/rk322x.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3228-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include "rk322x-u-boot.dtsi"
/ {
#address-cells = <1>;
diff --git a/arch/arm/dts/rk3288-u-boot.dtsi b/arch/arm/dts/rk3288-u-boot.dtsi
index 104a5392bf..903bee1bcc 100644
--- a/arch/arm/dts/rk3288-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-u-boot.dtsi
@@ -4,6 +4,7 @@
*/
#include "rockchip-u-boot.dtsi"
+#include "rk322x-u-boot.dtsi"
/ {
chosen {
diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig
index 350189fc63..cd03767bd5 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288_defconfig
@@ -14,7 +14,7 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/fit_spl_optee.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_PREBOOT=y
CONFIG_SILENT_CONSOLE=y
CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 44/49] rockchip: Convert evb-rk3229 over to use binman
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (42 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script Simon Glass
` (4 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
At present this board uses a custom script to produce the .its file.
Update it to use binman instead. Binman can create all the images that
are needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
Makefile | 1 +
configs/evb-rk3229_defconfig | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 98172a40d8..50f48f786a 100644
--- a/Makefile
+++ b/Makefile
@@ -1484,6 +1484,7 @@ ifeq ($(CONFIG_ARM64),y)
OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
+ echo rockchip
$(call if_changed,pad_cat)
endif # CONFIG_ARM64
diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig
index 4d7beca0b7..9c428fed2a 100644
--- a/configs/evb-rk3229_defconfig
+++ b/configs/evb-rk3229_defconfig
@@ -15,7 +15,7 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/fit_spl_optee.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3229-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (43 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 44/49] rockchip: Convert evb-rk3229 " Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs Simon Glass
` (3 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
Now that all board use binman instead of this script, drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/arm/mach-rockchip/fit_spl_optee.sh | 84 -------------------------
1 file changed, 84 deletions(-)
delete mode 100755 arch/arm/mach-rockchip/fit_spl_optee.sh
diff --git a/arch/arm/mach-rockchip/fit_spl_optee.sh b/arch/arm/mach-rockchip/fit_spl_optee.sh
deleted file mode 100755
index 4118472d9f..0000000000
--- a/arch/arm/mach-rockchip/fit_spl_optee.sh
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2019 Rockchip Electronic Co.,Ltd
-#
-# Script to generate FIT image source for 32-bit Rockchip SoCs with
-# U-Boot proper, OPTEE, and devicetree.
-#
-# usage: $0 <dt_name>
-
-[ -z "$TEE" ] && TEE="tee.bin"
-
-if [ ! -f $TEE ]; then
- echo "WARNING: TEE file $TEE NOT found, U-Boot.itb is non-functional" >&2
- echo "Please export path for TEE or copy tee.bin to U-Boot folder" >&2
- TEE=/dev/null
-fi
-
-dtname=$1
-text_base=`sed -n "/SYS_TEXT_BASE=/s/CONFIG_SYS_TEXT_BASE=//p" .config \
- |tr -d '\r'`
-dram_base=`sed -n "/SYS_SDRAM_BASE=/s/CONFIG_SYS_SDRAM_BASE=//p" \
- include/autoconf.mk|tr -d '\r'`
-tee_base=`echo "obase=16;$(($dram_base+0x8400000))"|bc`
-tee_base='0x'$tee_base
-
-cat << __HEADER_EOF
-/*
- * Copyright (C) 2017-2019 Rockchip Electronic Co.,Ltd
- *
- * Simple U-boot FIT source file containing U-Boot, dtb and optee
- */
-
-/dts-v1/;
-
-/ {
- description = "FIT image with OP-TEE support";
- #address-cells = <1>;
-
- images {
- uboot {
- description = "U-Boot";
- data = /incbin/("u-boot-nodtb.bin");
- type = "standalone";
- os = "U-Boot";
- arch = "arm";
- compression = "none";
- load = <$text_base>;
- };
- optee {
- description = "OP-TEE";
- data = /incbin/("$TEE");
- type = "firmware";
- arch = "arm";
- os = "tee";
- compression = "none";
- load = <$tee_base>;
- entry = <$tee_base>;
- };
- fdt {
- description = "$(basename $dtname .dtb)";
- data = /incbin/("$dtname");
- type = "flat_dt";
- compression = "none";
- };
-__HEADER_EOF
-
-cat << __CONF_HEADER_EOF
- };
-
- configurations {
- default = "conf";
- conf {
- description = "$(basename $dtname .dtb)";
- firmware = "optee";
- loadables = "uboot";
- fdt = "fdt";
- };
-__CONF_HEADER_EOF
-
-cat << __ITS_EOF
- };
-};
-__ITS_EOF
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (44 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout Simon Glass
` (2 subsequent siblings)
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
This causes conflicts on chromebook_link64. Move it to after U-Boot where
there should be plenty of space.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/x86/dts/u-boot.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
index f0f8c71761..1e0a985b43 100644
--- a/arch/x86/dts/u-boot.dtsi
+++ b/arch/x86/dts/u-boot.dtsi
@@ -92,6 +92,8 @@
u-boot-dtb {
};
#endif
+ fdtmap {
+ };
#ifdef CONFIG_HAVE_X86_FIT
intel-fit {
};
@@ -139,8 +141,6 @@
filename = CONFIG_FSP_FILE_S;
};
#endif
- fdtmap {
- };
#ifdef CONFIG_HAVE_CMC
intel-cmc {
filename = CONFIG_CMC_FILE;
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (45 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 48/49] x86: chromebook_panther: " Simon Glass
2020-06-14 2:57 ` [PATCH v2 49/49] x86: chromebook_samus_tpl: " Simon Glass
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
At present the image layout is not correct, since it uses the SDRAM
address of the 64-bit U-Boot as the ROM address. Fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
configs/chromebook_link64_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig
index 75f3d2c411..062e0c4aa7 100644
--- a/configs/chromebook_link64_defconfig
+++ b/configs/chromebook_link64_defconfig
@@ -15,8 +15,10 @@ CONFIG_DEBUG_UART=y
CONFIG_HAVE_MRC=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
+CONFIG_X86_OFFSET_U_BOOT=0xffa00000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 48/49] x86: chromebook_panther: Correct the image layout
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (46 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 49/49] x86: chromebook_samus_tpl: " Simon Glass
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
This board does not have microcode but at present that is not supported
by Kconfig nor the binman image layout. Fix both of these.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
(no changes since v1)
arch/x86/Kconfig | 7 ++++++-
arch/x86/dts/u-boot.dtsi | 6 +++++-
configs/chromebox_panther_defconfig | 2 ++
3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c688c46475..6bea6b9b92 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -594,8 +594,13 @@ config HAVE_REFCODE
Various peripherals may fail to work.
config HAVE_MICROCODE
- bool
+ bool "Board requires a microcode binary"
default y if !FSP_VERSION2
+ help
+ Enable this if the board requires microcode to be loaded on boot.
+ Typically this is handed by the FSP for modern boards, but for
+ some older boards, it must be programmed by U-Boot, and that form
+ part of the image.
config SMP
bool "Enable Symmetric Multiprocessing"
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
index 1e0a985b43..fa8106c8b8 100644
--- a/arch/x86/dts/u-boot.dtsi
+++ b/arch/x86/dts/u-boot.dtsi
@@ -75,11 +75,15 @@
u-boot {
offset = <CONFIG_SYS_TEXT_BASE>;
};
-# else
+# elif defined(CONFIG_HAVE_MICROCODE)
/* If there is no SPL then we need to put microcode in U-Boot */
u-boot-with-ucode-ptr {
offset = <CONFIG_X86_OFFSET_U_BOOT>;
};
+# else
+ u-boot-nodtb {
+ offset = <CONFIG_X86_OFFSET_U_BOOT>;
+ };
# endif
#endif
#ifdef CONFIG_HAVE_MICROCODE
diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig
index fd87ab262b..35ec3e912b 100644
--- a/configs/chromebox_panther_defconfig
+++ b/configs/chromebox_panther_defconfig
@@ -7,7 +7,9 @@ CONFIG_NR_DRAM_BANKS=8
CONFIG_VENDOR_GOOGLE=y
CONFIG_TARGET_CHROMEBOX_PANTHER=y
CONFIG_HAVE_MRC=y
+# CONFIG_HAVE_MICROCODE is not set
CONFIG_HAVE_VGA_BIOS=y
+CONFIG_X86_OFFSET_U_BOOT=0xffa00000
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 49/49] x86: chromebook_samus_tpl: Correct the image layout
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
` (47 preceding siblings ...)
2020-06-14 2:57 ` [PATCH v2 48/49] x86: chromebook_panther: " Simon Glass
@ 2020-06-14 2:57 ` Simon Glass
2020-06-29 8:01 ` Bin Meng
48 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-14 2:57 UTC (permalink / raw)
To: u-boot
At present there is not enough space for U-Boot due to the EFI loader.
Correct this.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
Changes in v2:
- Add patches to partially migrate rockchip to use binman
configs/chromebook_samus_tpl_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/chromebook_samus_tpl_defconfig b/configs/chromebook_samus_tpl_defconfig
index 82172ba810..29c21c1f20 100644
--- a/configs/chromebook_samus_tpl_defconfig
+++ b/configs/chromebook_samus_tpl_defconfig
@@ -16,7 +16,7 @@ CONFIG_HAVE_MRC=y
CONFIG_HAVE_REFCODE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
-CONFIG_X86_OFFSET_U_BOOT=0xfff00000
+CONFIG_X86_OFFSET_U_BOOT=0xffee0000
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y
--
2.27.0.290.gba653c62da-goog
^ permalink raw reply related [flat|nested] 93+ messages in thread
* [PATCH v2 29/49] tegra: Drop the unused non-binman code
2020-06-14 2:57 ` [PATCH v2 29/49] tegra: Drop the unused non-binman code Simon Glass
@ 2020-06-15 22:02 ` Stephen Warren
2020-06-16 13:44 ` Simon Glass
0 siblings, 1 reply; 93+ messages in thread
From: Stephen Warren @ 2020-06-15 22:02 UTC (permalink / raw)
To: u-boot
On 6/13/20 8:57 PM, Simon Glass wrote:
> This has been in the Makefile long enough to ensure migration is complete.
> Drop it.
> diff --git a/Makefile b/Makefile
> -OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
> -u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
> - $(call if_changed,pad_cat)
> -
> -OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
> -u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
> - $(call if_changed,pad_cat)
I don't see any replacement rules for those two binaries. Is the intent
to force all users not to use them any more; is that what "migration is
complete" means? Note that there are users of these files, so if this
change/series truly is removing them it will break those users; see:
> https://github.com/NVIDIA/tegra-uboot-flasher-scripts/blob/master/build#L166
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 29/49] tegra: Drop the unused non-binman code
2020-06-15 22:02 ` Stephen Warren
@ 2020-06-16 13:44 ` Simon Glass
2020-06-17 22:32 ` Stephen Warren
0 siblings, 1 reply; 93+ messages in thread
From: Simon Glass @ 2020-06-16 13:44 UTC (permalink / raw)
To: u-boot
Hi Stephen,
On Mon, 15 Jun 2020 at 16:03, Stephen Warren <swarren@wwwdotorg.org> wrote:
>
> On 6/13/20 8:57 PM, Simon Glass wrote:
> > This has been in the Makefile long enough to ensure migration is complete.
> > Drop it.
>
> > diff --git a/Makefile b/Makefile
>
> > -OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
> > -u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
> > - $(call if_changed,pad_cat)
> > -
> > -OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
> > -u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
> > - $(call if_changed,pad_cat)
>
> I don't see any replacement rules for those two binaries. Is the intent
> to force all users not to use them any more; is that what "migration is
> complete" means? Note that there are users of these files, so if this
> change/series truly is removing them it will break those users; see:
>
> > https://github.com/NVIDIA/tegra-uboot-flasher-scripts/blob/master/build#L166
Binman produces all three images when run, so we don't need makefile
rules for them anymore. It still produces the files. But let me know
if there are any problems.
Migration complete just means that there was a reason we had to keep
these rules before, and I hope it has gone away.
Regards,
Simon
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 29/49] tegra: Drop the unused non-binman code
2020-06-16 13:44 ` Simon Glass
@ 2020-06-17 22:32 ` Stephen Warren
0 siblings, 0 replies; 93+ messages in thread
From: Stephen Warren @ 2020-06-17 22:32 UTC (permalink / raw)
To: u-boot
On 6/16/20 7:44 AM, Simon Glass wrote:
> Hi Stephen,
>
> On Mon, 15 Jun 2020 at 16:03, Stephen Warren <swarren@wwwdotorg.org> wrote:
>>
>> On 6/13/20 8:57 PM, Simon Glass wrote:
>>> This has been in the Makefile long enough to ensure migration is complete.
>>> Drop it.
>>
>>> diff --git a/Makefile b/Makefile
>>
>>> -OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
>>> -u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
>>> - $(call if_changed,pad_cat)
>>> -
>>> -OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
>>> -u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
>>> - $(call if_changed,pad_cat)
>>
>> I don't see any replacement rules for those two binaries. Is the intent
>> to force all users not to use them any more; is that what "migration is
>> complete" means? Note that there are users of these files, so if this
>> change/series truly is removing them it will break those users; see:
>>
>>> https://github.com/NVIDIA/tegra-uboot-flasher-scripts/blob/master/build#L166
>
> Binman produces all three images when run, so we don't need makefile
> rules for them anymore. It still produces the files. But let me know
> if there are any problems.
OK, if the files are generated by binman anyway, this sounds fine.
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 01/49] dm: core Fix long line in device_bind_common()
2020-06-14 2:56 ` [PATCH v2 01/49] dm: core Fix long line in device_bind_common() Simon Glass
@ 2020-06-29 6:21 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:21 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Fix an over-length line in this function.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> drivers/core/device.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories
2020-06-14 2:56 ` [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories Simon Glass
@ 2020-06-29 6:21 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:21 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> These can appear when moving between branches that have different tools
> in the tree. Ignore them.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> .gitignore | 3 +++
> 1 file changed, 3 insertions(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 03/49] binman: Output errors to stderr
2020-06-14 2:56 ` [PATCH v2 03/49] binman: Output errors to stderr Simon Glass
@ 2020-06-29 6:21 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:21 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> At present binman outputs errors to stdout which means that fails are
> effectively silent when printed by buildman, for example. Fix this by
> outputing errors to stderr.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Add new binman patch to output errors to stderr
>
> tools/binman/main.py | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 04/49] binman: cbfs: Fix IFWI typo
2020-06-14 2:56 ` [PATCH v2 04/49] binman: cbfs: Fix IFWI typo Simon Glass
@ 2020-06-29 6:21 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:21 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> This comment references the wrong thing. Fix it.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/etype/cbfs.py | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 05/49] binman: Correct the search patch for pylibfdt
2020-06-14 2:56 ` [PATCH v2 05/49] binman: Correct the search patch for pylibfdt Simon Glass
@ 2020-06-29 6:21 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:21 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Now that binman uses tools/ as its base directory for importing modules,
> the path to the pylibfdt build by U-Boot is incorrect. Fix it with a new
> path.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Leave the old (object-directory) path in place
>
> tools/binman/main.py | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 08/49] binman: Fix a few typos in the entry docs
2020-06-14 2:56 ` [PATCH v2 08/49] binman: Fix a few typos in the entry docs Simon Glass
@ 2020-06-29 6:21 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:21 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Some typos have been fixed in the code but the entry docs were not
> regenerated. Fix this.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/README.entries | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/tools/binman/README.entries b/tools/binman/README.entries
> index 4f2c48fdc2..d5b4b3af2b 100644
> --- a/tools/binman/README.entries
> +++ b/tools/binman/README.entries
> @@ -519,7 +519,7 @@ Properties / Entry arguments:
>
> This file contains code used by the SoC that is required to make it work.
> The Management Engine is like a background task that runs things that are
> -not clearly documented, but may include keyboard, display and network
> +not clearly documented, but may include keyboard, deplay and network
I don't understand this change. The existing doc does not have typo,
but your changes have.
> access. For platform that use ME it is not possible to disable it. U-Boot
> does not directly execute code in the ME binary.
>
> @@ -616,7 +616,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f
> Properties / Entry arguments:
> - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin')
>
> -This entry is valid for PowerPC mpc85xx cpus. This entry holds
> +This enrty is valid for PowerPC mpc85xx cpus. This entry holds
ditto
> 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be
> placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
>
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build
2020-06-14 2:56 ` [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build Simon Glass
@ 2020-06-29 6:21 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:21 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> If the pylibfdt shared-object file is detected, then Python assumes that
> the libfdt.py file exists also.
>
> Sometimes when an incremental build aborts, the shared-object file is
> built but the libfdt.py is not. The only way out at this point is to use
> 'make mkproper', or similar.
>
> Fix this by removing the .so file before it is built. This seems to make
> Python rebuild everything.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> scripts/dtc/pylibfdt/Makefile | 3 +++
> 1 file changed, 3 insertions(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 11/49] binman: Use super() instead of specifying parent type
2020-06-14 2:56 ` [PATCH v2 11/49] binman: Use super() instead of specifying parent type Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> It is easier and less error-prone to use super() when the parent type is
> needed. Update binman to remove the type names.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/etype/_testing.py | 4 ++--
> tools/binman/etype/blob.py | 2 +-
> tools/binman/etype/blob_dtb.py | 6 +++---
> tools/binman/etype/blob_named_by_arg.py | 2 +-
> tools/binman/etype/cbfs.py | 14 +++++++-------
> tools/binman/etype/cros_ec_rw.py | 3 +--
> tools/binman/etype/fdtmap.py | 2 +-
> tools/binman/etype/files.py | 2 +-
> tools/binman/etype/fill.py | 4 ++--
> tools/binman/etype/fmap.py | 2 +-
> tools/binman/etype/gbb.py | 2 +-
> tools/binman/etype/image_header.py | 4 ++--
> tools/binman/etype/intel_cmc.py | 2 +-
> tools/binman/etype/intel_descriptor.py | 4 ++--
> tools/binman/etype/intel_fit.py | 4 ++--
> tools/binman/etype/intel_fit_ptr.py | 4 ++--
> tools/binman/etype/intel_fsp.py | 2 +-
> tools/binman/etype/intel_fsp_m.py | 2 +-
> tools/binman/etype/intel_fsp_s.py | 2 +-
> tools/binman/etype/intel_fsp_t.py | 2 +-
> tools/binman/etype/intel_ifwi.py | 4 ++--
> tools/binman/etype/intel_me.py | 2 +-
> tools/binman/etype/intel_mrc.py | 2 +-
> tools/binman/etype/intel_refcode.py | 2 +-
> tools/binman/etype/intel_vbt.py | 2 +-
> tools/binman/etype/intel_vga.py | 2 +-
> tools/binman/etype/mkimage.py | 2 +-
> .../etype/powerpc_mpc85xx_bootpg_resetvec.py | 2 +-
> tools/binman/etype/section.py | 16 ++++++++--------
> tools/binman/etype/text.py | 2 +-
> tools/binman/etype/u_boot.py | 2 +-
> tools/binman/etype/u_boot_dtb.py | 2 +-
> tools/binman/etype/u_boot_dtb_with_ucode.py | 4 ++--
> tools/binman/etype/u_boot_elf.py | 4 ++--
> tools/binman/etype/u_boot_img.py | 2 +-
> tools/binman/etype/u_boot_nodtb.py | 2 +-
> tools/binman/etype/u_boot_spl.py | 2 +-
> tools/binman/etype/u_boot_spl_bss_pad.py | 2 +-
> tools/binman/etype/u_boot_spl_dtb.py | 2 +-
> tools/binman/etype/u_boot_spl_elf.py | 2 +-
> tools/binman/etype/u_boot_spl_nodtb.py | 2 +-
> tools/binman/etype/u_boot_spl_with_ucode_ptr.py | 2 +-
> tools/binman/etype/u_boot_tpl.py | 2 +-
> tools/binman/etype/u_boot_tpl_dtb.py | 2 +-
> tools/binman/etype/u_boot_tpl_dtb_with_ucode.py | 2 +-
> tools/binman/etype/u_boot_tpl_elf.py | 2 +-
> tools/binman/etype/u_boot_tpl_with_ucode_ptr.py | 2 +-
> tools/binman/etype/u_boot_ucode.py | 2 +-
> tools/binman/etype/u_boot_with_ucode_ptr.py | 2 +-
> tools/binman/etype/vblock.py | 2 +-
> tools/binman/etype/x86_reset16.py | 2 +-
> tools/binman/etype/x86_reset16_spl.py | 2 +-
> tools/binman/etype/x86_reset16_tpl.py | 2 +-
> tools/binman/etype/x86_start16.py | 2 +-
> tools/binman/etype/x86_start16_spl.py | 2 +-
> tools/binman/etype/x86_start16_tpl.py | 2 +-
> tools/binman/image.py | 12 ++++++------
> 57 files changed, 86 insertions(+), 87 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 12/49] binman: Add an etype for external binary blobs
2020-06-14 2:56 ` [PATCH v2 12/49] binman: Add an etype for external binary blobs Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> It is useful to be able to distinguish between ordinary blobs such as
> u-boot.bin and external blobs that cannot be build by the U-Boot build
> system. If the external blobs are not available for some reason, then we
> know that a value image cannot be built.
>
> Introduce a new 'blob-ext' entry type for that.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/README.entries | 10 +++++++
> tools/binman/etype/blob_ext.py | 31 ++++++++++++++++++++++
> tools/binman/ftest.py | 12 +++++++++
> tools/binman/test/157_blob_ext.dts | 14 ++++++++++
> tools/binman/test/158_blob_ext_missing.dts | 16 +++++++++++
> 5 files changed, 83 insertions(+)
> create mode 100644 tools/binman/etype/blob_ext.py
> create mode 100644 tools/binman/test/157_blob_ext.dts
> create mode 100644 tools/binman/test/158_blob_ext_missing.dts
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext
2020-06-14 2:56 ` [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Many of the existing blobs rely on external binaries which may not be
> available. Move them over to use blob_ext to indicate this.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/etype/cros_ec_rw.py | 1 +
> tools/binman/etype/intel_cmc.py | 5 ++---
> tools/binman/etype/intel_descriptor.py | 4 ++--
> tools/binman/etype/intel_fit.py | 4 ++--
> tools/binman/etype/intel_fit_ptr.py | 4 ++--
> tools/binman/etype/intel_fsp.py | 5 ++---
> tools/binman/etype/intel_fsp_m.py | 5 ++---
> tools/binman/etype/intel_fsp_s.py | 5 ++---
> tools/binman/etype/intel_fsp_t.py | 5 ++---
> tools/binman/etype/intel_ifwi.py | 4 ++--
> tools/binman/etype/intel_me.py | 5 ++---
> tools/binman/etype/intel_mrc.py | 5 ++---
> tools/binman/etype/intel_refcode.py | 5 ++---
> tools/binman/etype/intel_vbt.py | 5 ++---
> tools/binman/etype/intel_vga.py | 5 ++---
> tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py | 1 -
> 16 files changed, 29 insertions(+), 39 deletions(-)
>
> diff --git a/tools/binman/etype/cros_ec_rw.py b/tools/binman/etype/cros_ec_rw.py
> index 7ad62d0265..741372e1af 100644
> --- a/tools/binman/etype/cros_ec_rw.py
> +++ b/tools/binman/etype/cros_ec_rw.py
> @@ -19,3 +19,4 @@ class Entry_cros_ec_rw(Entry_blob_named_by_arg):
> """
> def __init__(self, section, etype, node):
> super().__init__(section, etype, node, 'cros-ec-rw')
> + self.external = True
Can this class be inherited from blob_ext?
> diff --git a/tools/binman/etype/intel_cmc.py b/tools/binman/etype/intel_cmc.py
> index 9ab471e7b6..644fa421d3 100644
> --- a/tools/binman/etype/intel_cmc.py
> +++ b/tools/binman/etype/intel_cmc.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Chip Microcode binary blob
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_cmc(Entry_blob):
> +class Entry_intel_cmc(Entry_blob_ext):
> """Entry containing an Intel Chipset Micro Code (CMC) file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_descriptor.py b/tools/binman/etype/intel_descriptor.py
> index 6afc42ece5..5b18893ccd 100644
> --- a/tools/binman/etype/intel_descriptor.py
> +++ b/tools/binman/etype/intel_descriptor.py
> @@ -8,7 +8,7 @@
> import struct
>
> from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> FD_SIGNATURE = struct.pack('<L', 0x0ff0a55a)
> MAX_REGIONS = 5
> @@ -25,7 +25,7 @@ class Region:
> self.limit = ((val & 0x0fff0000) >> 4) | 0xfff
> self.size = self.limit - self.base + 1
>
> -class Entry_intel_descriptor(Entry_blob):
> +class Entry_intel_descriptor(Entry_blob_ext):
> """Intel flash descriptor block (4KB)
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_fit.py b/tools/binman/etype/intel_fit.py
> index ad6c1caa85..f1a10c55a6 100644
> --- a/tools/binman/etype/intel_fit.py
> +++ b/tools/binman/etype/intel_fit.py
> @@ -7,9 +7,9 @@
>
> import struct
>
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_fit(Entry_blob):
> +class Entry_intel_fit(Entry_blob_ext):
> """Intel Firmware Image Table (FIT)
>
> This entry contains a dummy FIT as required by recent Intel CPUs. The FIT
> diff --git a/tools/binman/etype/intel_fit_ptr.py b/tools/binman/etype/intel_fit_ptr.py
> index a06d12e740..01f082281c 100644
> --- a/tools/binman/etype/intel_fit_ptr.py
> +++ b/tools/binman/etype/intel_fit_ptr.py
> @@ -7,9 +7,9 @@
>
> import struct
>
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_fit_ptr(Entry_blob):
> +class Entry_intel_fit_ptr(Entry_blob_ext):
> """Intel Firmware Image Table (FIT) pointer
>
> This entry contains a pointer to the FIT. It is required to be at address
> diff --git a/tools/binman/etype/intel_fsp.py b/tools/binman/etype/intel_fsp.py
> index a1c89adcea..2ac012bce1 100644
> --- a/tools/binman/etype/intel_fsp.py
> +++ b/tools/binman/etype/intel_fsp.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Firmware Support Package binary blob
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_fsp(Entry_blob):
> +class Entry_intel_fsp(Entry_blob_ext):
> """Entry containing an Intel Firmware Support Package (FSP) file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_fsp_m.py b/tools/binman/etype/intel_fsp_m.py
> index 4c225b24d3..434b0f1856 100644
> --- a/tools/binman/etype/intel_fsp_m.py
> +++ b/tools/binman/etype/intel_fsp_m.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Firmware Support Package binary blob (M section)
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_fsp_m(Entry_blob):
> +class Entry_intel_fsp_m(Entry_blob_ext):
> """Entry containing Intel Firmware Support Package (FSP) memory init
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_fsp_s.py b/tools/binman/etype/intel_fsp_s.py
> index 9e1107182a..564e1228bb 100644
> --- a/tools/binman/etype/intel_fsp_s.py
> +++ b/tools/binman/etype/intel_fsp_s.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Firmware Support Package binary blob (S section)
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_fsp_s(Entry_blob):
> +class Entry_intel_fsp_s(Entry_blob_ext):
> """Entry containing Intel Firmware Support Package (FSP) silicon init
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_fsp_t.py b/tools/binman/etype/intel_fsp_t.py
> index 5dca145a3f..df0c5fbee0 100644
> --- a/tools/binman/etype/intel_fsp_t.py
> +++ b/tools/binman/etype/intel_fsp_t.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Firmware Support Package binary blob (T section)
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_fsp_t(Entry_blob):
> +class Entry_intel_fsp_t(Entry_blob_ext):
> """Entry containing Intel Firmware Support Package (FSP) temp ram init
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_ifwi.py b/tools/binman/etype/intel_ifwi.py
> index ba63f6574f..b0c2b1aaa3 100644
> --- a/tools/binman/etype/intel_ifwi.py
> +++ b/tools/binman/etype/intel_ifwi.py
> @@ -8,11 +8,11 @@
> from collections import OrderedDict
>
> from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
> from dtoc import fdt_util
> from patman import tools
>
> -class Entry_intel_ifwi(Entry_blob):
> +class Entry_intel_ifwi(Entry_blob_ext):
> """Entry containing an Intel Integrated Firmware Image (IFWI) file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_me.py b/tools/binman/etype/intel_me.py
> index 22f61f44d8..a55b159485 100644
> --- a/tools/binman/etype/intel_me.py
> +++ b/tools/binman/etype/intel_me.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Management Engine binary blob
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_me(Entry_blob):
> +class Entry_intel_me(Entry_blob_ext):
> """Entry containing an Intel Management Engine (ME) file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_mrc.py b/tools/binman/etype/intel_mrc.py
> index 74781848e2..ccbb046519 100644
> --- a/tools/binman/etype/intel_mrc.py
> +++ b/tools/binman/etype/intel_mrc.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Memory Reference Code binary blob
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_mrc(Entry_blob):
> +class Entry_intel_mrc(Entry_blob_ext):
> """Entry containing an Intel Memory Reference Code (MRC) file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_refcode.py b/tools/binman/etype/intel_refcode.py
> index 5754fec4f8..5ead08b2be 100644
> --- a/tools/binman/etype/intel_refcode.py
> +++ b/tools/binman/etype/intel_refcode.py
> @@ -5,10 +5,9 @@
> # Entry-type module for Intel Memory Reference Code binary blob
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_refcode(Entry_blob):
> +class Entry_intel_refcode(Entry_blob_ext):
> """Entry containing an Intel Reference Code file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_vbt.py b/tools/binman/etype/intel_vbt.py
> index f6d7b466ea..2a98c12368 100644
> --- a/tools/binman/etype/intel_vbt.py
> +++ b/tools/binman/etype/intel_vbt.py
> @@ -4,10 +4,9 @@
> # Entry-type module for Intel Video BIOS Table binary blob
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_vbt(Entry_blob):
> +class Entry_intel_vbt(Entry_blob_ext):
> """Entry containing an Intel Video BIOS Table (VBT) file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/intel_vga.py b/tools/binman/etype/intel_vga.py
> index 6b87c01b4c..a103f1ce0e 100644
> --- a/tools/binman/etype/intel_vga.py
> +++ b/tools/binman/etype/intel_vga.py
> @@ -5,10 +5,9 @@
> # Entry-type module for x86 VGA ROM binary blob
> #
>
> -from binman.entry import Entry
> -from binman.etype.blob import Entry_blob
> +from binman.etype.blob_ext import Entry_blob_ext
>
> -class Entry_intel_vga(Entry_blob):
> +class Entry_intel_vga(Entry_blob_ext):
> """Entry containing an Intel Video Graphics Adaptor (VGA) file
>
> Properties / Entry arguments:
> diff --git a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
> index e6480f7a15..4276df2b55 100644
> --- a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
> +++ b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
> @@ -4,7 +4,6 @@
> # Entry-type module for the PowerPC mpc85xx bootpg and resetvec code for U-Boot
> #
>
> -from binman.entry import Entry
> from binman.etype.blob import Entry_blob
This looks unrelated change
>
> class Entry_powerpc_mpc85xx_bootpg_resetvec(Entry_blob):
Regards,
Bin
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 14/49] binman: Allow external binaries to be missing
2020-06-14 2:56 ` [PATCH v2 14/49] binman: Allow external binaries to be missing Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Sometimes it is useful to build an image even though external binaries are
> not present. This allows the build system to continue to function without
> these files, albeit not producing valid images.
>
> U-Boot does with with ATF (ARM Trusted Firmware) today.
>
> Add a new flag to binman to request this behaviour.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/README.entries | 3 +++
> tools/binman/cmdline.py | 2 ++
> tools/binman/control.py | 7 +++++--
> tools/binman/etype/blob_ext.py | 13 ++++++++++---
> tools/binman/etype/section.py | 17 +++++++++++++++++
> tools/binman/ftest.py | 8 +++++++-
> tools/patman/tools.py | 8 ++++++--
> 7 files changed, 50 insertions(+), 8 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 15/49] patman: Update errors and warnings to use stderr
2020-06-14 2:56 ` [PATCH v2 15/49] patman: Update errors and warnings to use stderr Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> When warnings and errors are produced by tools they should be written to
> stderr. Update the tout implementation to handle this.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/ftest.py | 2 +-
> tools/patman/tout.py | 5 ++++-
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 16/49] binman: Detect when valid images are not produced
2020-06-14 2:56 ` [PATCH v2 16/49] binman: Detect when valid images are not produced Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> When external blobs are missing, show a message indicating that the images
> are not functional.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/control.py | 16 +++++++++++--
> tools/binman/entry.py | 21 +++++++++++++++++
> tools/binman/etype/blob_ext.py | 1 +
> tools/binman/etype/section.py | 16 ++++++++++++-
> tools/binman/ftest.py | 14 ++++++++++-
> .../binman/test/159_blob_ext_missing_sect.dts | 23 +++++++++++++++++++
> tools/patman/tout.py | 1 +
> 7 files changed, 88 insertions(+), 4 deletions(-)
> create mode 100644 tools/binman/test/159_blob_ext_missing_sect.dts
>
> diff --git a/tools/binman/control.py b/tools/binman/control.py
> index 8c6eae83f1..343b0a0c35 100644
> --- a/tools/binman/control.py
> +++ b/tools/binman/control.py
> @@ -403,6 +403,9 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True,
> allow_resize: True to allow entries to change size (this does a re-pack
> of the entries), False to raise an exception
> allow_missing: Allow blob_ext objects to be missing
> +
> + Returns:
> + True if one or more external blobs are missing, False if all are present
> """
> if get_contents:
> image.SetAllowMissing(allow_missing)
> @@ -450,6 +453,12 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True,
> image.BuildImage()
> if write_map:
> image.WriteMap()
> + missing_list = []
> + image.CheckMissing(missing_list)
> + if missing_list:
> + tout.Warning("Image '%s' is missing external blobs and is non-functional: %s" %
> + (image.name, ' '.join([e.name for e in missing_list])))
> + return bool(missing_list)
>
>
> def Binman(args):
> @@ -524,14 +533,17 @@ def Binman(args):
>
> images = PrepareImagesAndDtbs(dtb_fname, args.image,
> args.update_fdt)
> + missing = False
> for image in images.values():
> - ProcessImage(image, args.update_fdt, args.map,
> - allow_missing=args.allow_missing)
> + missing |= ProcessImage(image, args.update_fdt, args.map,
> + allow_missing=args.allow_missing)
>
> # Write the updated FDTs to our output files
> for dtb_item in state.GetAllFdts():
> tools.WriteFile(dtb_item._fname, dtb_item.GetContents())
>
> + if missing:
> + tout.Warning("Some images are invalid")
> finally:
> tools.FinaliseOutputDir()
> finally:
> diff --git a/tools/binman/entry.py b/tools/binman/entry.py
> index 90ffd27617..4a42e0bf34 100644
> --- a/tools/binman/entry.py
> +++ b/tools/binman/entry.py
> @@ -84,6 +84,7 @@ class Entry(object):
> self.image_pos = None
> self._expand_size = False
> self.compress = 'none'
> + self.missing = False
>
> @staticmethod
> def Lookup(node_path, etype):
> @@ -794,3 +795,23 @@ features to produce new behaviours.
> elif self == entries[-1]:
> return 'end'
> return 'middle'
> +
> + def SetAllowMissing(self, allow_missing):
> + """Set whether a section allows missing external blobs
> +
> + Args:
> + allow_missing: True if allowed, False if not allowed
> + """
> + # This is meaningless for
for what?
> + self._allow_missing = allow_missing
> +
Should the above changes be in patch "[v2,14/49] binman: Allow
external binaries to be missing" ?
> + def CheckMissing(self, missing_list):
> + """Check if any entries in this section have missing external blobs
> +
> + If there are missing blobs, the entries are added to the list
> +
> + Args:
> + missing_list: List of Entry objects to be added to
> + """
> + if self.missing:
> + missing_list.append(self)
> diff --git a/tools/binman/etype/blob_ext.py b/tools/binman/etype/blob_ext.py
> index 51779c88c9..8d641001a9 100644
> --- a/tools/binman/etype/blob_ext.py
> +++ b/tools/binman/etype/blob_ext.py
> @@ -34,5 +34,6 @@ class Entry_blob_ext(Entry_blob):
> # Allow the file to be missing
> if not self._pathname:
> self.SetContents(b'')
> + self.missing = True
> return True
> return super().ObtainContents()
> diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
> index 44b13b2575..3b42a5890f 100644
> --- a/tools/binman/etype/section.py
> +++ b/tools/binman/etype/section.py
> @@ -50,6 +50,7 @@ class Entry_section(Entry):
> self._skip_at_start = None
> self._end_4gb = False
> self._allow_missing = False
> + self.missing = False
>
> def ReadNode(self):
> """Read properties from the image node"""
> @@ -543,7 +544,9 @@ class Entry_section(Entry):
> Args:
> allow_missing: True if allowed, False if not allowed
> """
> - self._allow_missing = allow_missing
> + super().SetAllowMissing(allow_missing)
> + for entry in self._entries.values():
> + entry.SetAllowMissing(allow_missing)
>
> def GetAllowMissing(self):
> """Get whether a section allows missing external blobs
> @@ -552,3 +555,14 @@ class Entry_section(Entry):
> True if allowed, False if not allowed
> """
> return self._allow_missing
> +
> + def CheckMissing(self, missing_list):
> + """Check if any entries in this section have missing external blobs
> +
> + If there are missing blobs, the entries are added to the list
> +
> + Args:
> + missing_list: List of Entry objects to be added to
> + """
> + for entry in self._entries.values():
> + entry.CheckMissing(missing_list)
> diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
> index 928d3608a3..cc551c9f17 100644
> --- a/tools/binman/ftest.py
> +++ b/tools/binman/ftest.py
> @@ -3380,7 +3380,19 @@ class TestFunctional(unittest.TestCase):
>
> def testExtblobMissingOk(self):
> """Test an image with an missing external blob that is allowed"""
> - self._DoTestFile('158_blob_ext_missing.dts', allow_missing=True)
> + with test_util.capture_sys_output() as (stdout, stderr):
> + self._DoTestFile('158_blob_ext_missing.dts', allow_missing=True)
> + err = stderr.getvalue()
> + self.assertRegex(err, "Image 'main-section'.*missing.*: blob-ext")
> +
> + def testExtblobMissingOkSect(self):
> + """Test an image with an missing external blob that is allowed"""
> + with test_util.capture_sys_output() as (stdout, stderr):
> + self._DoTestFile('159_blob_ext_missing_sect.dts',
> + allow_missing=True)
> + err = stderr.getvalue()
> + self.assertRegex(err, "Image 'main-section'.*missing.*: "
> + "blob-ext blob-ext2")
>
>
> if __name__ == "__main__":
> diff --git a/tools/binman/test/159_blob_ext_missing_sect.dts b/tools/binman/test/159_blob_ext_missing_sect.dts
> new file mode 100644
> index 0000000000..5f14c54138
> --- /dev/null
> +++ b/tools/binman/test/159_blob_ext_missing_sect.dts
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/dts-v1/;
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + binman {
> + size = <0x80>;
> +
> + section {
> + blob-ext {
> + filename = "missing-file";
> + };
> + };
> +
> + blob-ext2 {
> + type = "blob-ext";
> + filename = "missing-file2";
> + };
> + };
> +};
> diff --git a/tools/patman/tout.py b/tools/patman/tout.py
> index 91a53f4073..33305263d8 100644
> --- a/tools/patman/tout.py
> +++ b/tools/patman/tout.py
> @@ -171,6 +171,7 @@ def Init(_verbose=WARNING, stdout=sys.stdout):
>
> # TODO(sjg): Move this into Chromite libraries when we have them
> stdout_is_tty = hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()
> + stderr_is_tty = hasattr(sys.stderr, 'isatty') and sys.stderr.isatty()
>
> def Uninit():
> ClearProgress()
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 17/49] binman: Allow missing Intel blobs
2020-06-14 2:56 ` [PATCH v2 17/49] binman: Allow missing Intel blobs Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Update the Intel blob entries to support missing binaries.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/etype/intel_descriptor.py | 7 ++++-
> tools/binman/etype/intel_ifwi.py | 17 ++++++++---
> tools/binman/etype/section.py | 4 +--
> tools/binman/ftest.py | 41 +++++++++++++++++++++-----
> 4 files changed, 55 insertions(+), 14 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 18/49] binman: Allow zero-length entries to overlap
2020-06-14 2:56 ` [PATCH v2 18/49] binman: Allow zero-length entries to overlap Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Some binary blobs unfortunately obtain their position in the image from
> other binary blobs, such as Intel's 'descriptor'. In this case we cannot
> rely on packing to work. It is not possible to produce a valid image in
> any case, due to the missing blobs.
>
> Allow zero-length overlaps so that this does not cause any problems.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> tools/binman/etype/section.py | 2 +-
> tools/binman/ftest.py | 4 ++++
> tools/binman/test/160_pack_overlap_zero.dts | 18 ++++++++++++++++++
> 3 files changed, 23 insertions(+), 1 deletion(-)
> create mode 100644 tools/binman/test/160_pack_overlap_zero.dts
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp
2020-06-14 2:56 ` [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp Simon Glass
@ 2020-06-29 6:54 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 6:54 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Normally the FIT timestamp is created the first time mkimage is run on a
> FIT, when converting the source .its to the binary .fit file. This
> corresponds to using the -f flag. But if the original input to mkimage is
> a binary file (already compiled) then the timestamp is assumed to have
> been set previously.
>
> Add a -t flag to allow setting the timestamp in this case.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> doc/mkimage.1 | 9 +++++++++
> tools/fit_image.c | 2 +-
> tools/imagetool.h | 1 +
> tools/mkimage.c | 5 ++++-
> 4 files changed, 15 insertions(+), 2 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works
2020-06-14 2:57 ` [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works Simon Glass
@ 2020-06-29 7:30 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:30 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Most x86 boards build a u-boot.rom which is programmed into SPI flash. But
> this is not unique to x86. For example some rockchip boards can also boot
> from SPI flash.
>
> Also, at least on x86, binary blobs are sadly quite common. It is not
> possible to build a functional image without them, and U-Boot needs to
> know this at build time.
>
> Introduce a new CONFIG_HAS_ROM option which selects whether u-boot.rom is
> built and a new CONFIG_ROM_NEEDS_BLOBS option to indicate whether binary
> blobs are also needed. If they are not needed, it is safe to build the ROM
> always. Otherwise we still require the BUILD_ROM environment variable.
>
> For now this affects only x86, but future patches will enable this for
> rockchip too.
The commit tag has rockchip, but this patch only affects x86 for now.
Remove this tag?
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Kconfig | 18 +++++++++++++++++-
> Makefile | 18 +++++++++++++-----
> arch/Kconfig | 1 +
> arch/x86/Kconfig | 4 ++++
> arch/x86/cpu/baytrail/Kconfig | 1 +
> arch/x86/cpu/quark/Kconfig | 1 +
> 6 files changed, 37 insertions(+), 6 deletions(-)
>
> diff --git a/Kconfig b/Kconfig
> index 0e7ccc0b07..876c5db911 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -240,9 +240,25 @@ config PHYS_64BIT
> This can be used not only for 64bit SoCs, but also for
> large physical address extension on 32bit SoCs.
>
> +config HAS_ROM
> + bool
> + select BINMAN
> + help
> + Enables building of a u-boot.rom target. This collects U-Boot and
> + any necessary binary blobs.
> +
> +config ROM_NEEDS_BLOBS
> + bool
> + depends on HAS_ROM
> + help
> + Enable this if building the u-boot.rom target needs binary blobs, and
> + so cannot be done normally. In this case, pass BUILD_ROM=1 to make
> + to tell U-Boot to build the ROM.
> +
> config BUILD_ROM
> bool "Build U-Boot as BIOS replacement"
> - depends on X86
> + depends on HAS_ROM
> + default y if !ROM_NEEDS_BLOBS
> help
> This option allows to build a ROM version of U-Boot.
> The build process generally requires several binary blobs
> diff --git a/Makefile b/Makefile
> index 149f839948..8a2bb94f2c 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -916,9 +916,12 @@ ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
> ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
> ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
>
> +ifneq ($(CONFIG_HAS_ROM),)
> ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
> -ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
> +ALL-y += u-boot.rom
> endif
> +endif
> +
> ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
> ALL-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
> endif
> @@ -1580,7 +1583,7 @@ endif
> # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
> # the middle. This is handled by binman based on an image description in the
> # board's device tree.
> -ifneq ($(CONFIG_X86_RESET_VECTOR),)
> +ifneq ($(CONFIG_HAS_ROM),)
> rom: u-boot.rom FORCE
>
> refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
> @@ -1590,11 +1593,12 @@ quiet_cmd_ldr = LD $@
> cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
> $(filter-out FORCE,$^) -o $@
>
> -u-boot.rom: u-boot-x86-start16.bin u-boot-x86-reset16.bin u-boot.bin \
> +rom-deps := u-boot.bin
> +ifdef CONFIG_X86
> +rom-deps += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
> $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
> $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
> - $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
> - $(call if_changed,binman)
> + $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
>
> OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
> u-boot-x86-start16.bin: u-boot FORCE
> @@ -1605,6 +1609,10 @@ u-boot-x86-reset16.bin: u-boot FORCE
> $(call if_changed,objcopy)
> endif
>
> +u-boot.rom: $(rom-deps) FORCE
> + $(call if_changed,binman)
> +endif
> +
> ifneq ($(CONFIG_ARCH_SUNXI),)
> ifeq ($(CONFIG_ARM64),)
> u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
> diff --git a/arch/Kconfig b/arch/Kconfig
> index a11f872938..ff417d40fd 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -160,6 +160,7 @@ config X86
> select TIMER
> select USE_PRIVATE_LIBGCC
> select X86_TSC_TIMER
> + imply HAS_ROM if X86_RESET_VECTOR
> imply BLK
> imply CMD_DM
> imply CMD_FPGA_LOADMK
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index c8eae24c07..c688c46475 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -360,6 +360,8 @@ config HAVE_FSP
> bool "Add an Firmware Support Package binary"
> depends on !EFI
> select USE_HOB
> + select HAS_ROM
> + select ROM_NEEDS_BLOBS
> help
> Select this option to add an Firmware Support Package binary to
> the resulting U-Boot image. It is a binary blob which U-Boot uses
> @@ -519,6 +521,8 @@ config ENABLE_MRC_CACHE
>
> config HAVE_MRC
> bool "Add a System Agent binary"
> + select HAS_ROM
> + select ROM_NEEDS_BLOBS
> depends on !HAVE_FSP
> help
> Select this option to add a System Agent binary to
> diff --git a/arch/x86/cpu/baytrail/Kconfig b/arch/x86/cpu/baytrail/Kconfig
> index d2c3473d6a..53d945e931 100644
> --- a/arch/x86/cpu/baytrail/Kconfig
> +++ b/arch/x86/cpu/baytrail/Kconfig
> @@ -7,6 +7,7 @@ config INTEL_BAYTRAIL
> select HAVE_FSP
> select ARCH_MISC_INIT
> select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED
> + imply ROM_NEEDS_BLOBS
This is already selected by HAVE_FSP
> imply HAVE_INTEL_ME
> imply ENABLE_MRC_CACHE
> imply AHCI_PCI
> diff --git a/arch/x86/cpu/quark/Kconfig b/arch/x86/cpu/quark/Kconfig
> index 430cce184d..2fee38aed7 100644
> --- a/arch/x86/cpu/quark/Kconfig
> +++ b/arch/x86/cpu/quark/Kconfig
> @@ -24,6 +24,7 @@ if INTEL_QUARK
>
> config HAVE_RMU
> bool "Add a Remote Management Unit (RMU) binary"
> + select ROM_NEEDS_BLOBS
> help
> Select this option to add a Remote Management Unit (RMU) binary
> to the resulting U-Boot image. It is a data block (up to 64K) of
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards
2020-06-14 2:57 ` [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards Simon Glass
@ 2020-06-29 7:30 ` Bin Meng
2020-07-10 0:35 ` Simon Glass
0 siblings, 1 reply; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:30 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
>
> Some non-x86 devices can use SPI flash to boot and need to produce images
> of a fixed size to program the flash.
>
> Add a way to handle this for non-x86 boards.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/Makefile b/Makefile
> index 8a2bb94f2c..07c237120d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1607,6 +1607,18 @@ u-boot-x86-start16.bin: u-boot FORCE
> OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
> u-boot-x86-reset16.bin: u-boot FORCE
> $(call if_changed,objcopy)
> +
> +else # !CONFIG_X86
> +
> +ifdef CONFIG_SPL
> +rom-deps += spl/u-boot-spl.bin
> +rom-deps += u-boot.img
Not every platform has a u-boot.img target ?
> +endif
> +
> +ifdef CONFIG_TPL
> +rom-deps += tpl/u-boot-tpl.bin
> +endif
> +
> endif
>
> u-boot.rom: $(rom-deps) FORCE
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y
2020-06-14 2:57 ` [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y Simon Glass
@ 2020-06-29 7:44 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:44 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> When binman is in use, most of the targets built by the Makefile are
> inputs to binman. We then need a final rule to run binman to produce the
> final outputs.
>
> Rename the variable to indicate this, and add a new 'inputs' target.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 60 +++++++++++++++++---------------
> arch/arm/config.mk | 10 +++---
> arch/arm/mach-at91/config.mk | 2 +-
> arch/arm/mach-davinci/config.mk | 2 +-
> arch/arm/mach-k3/config.mk | 10 +++---
> arch/arm/mach-keystone/config.mk | 4 +--
> arch/arm/mach-omap2/config.mk | 28 +++++++--------
> arch/arm/mach-rmobile/Makefile | 2 +-
> arch/arm/mach-stm32mp/config.mk | 4 +--
> board/BuR/brppt1/config.mk | 4 +--
> board/BuR/brppt2/config.mk | 4 +--
> board/BuR/brsmarc1/config.mk | 6 ++--
> board/imgtec/boston/config.mk | 2 +-
> board/intel/edison/config.mk | 2 +-
> scripts/Makefile.spl | 24 ++++++-------
> tools/binman/README | 2 +-
> 16 files changed, 85 insertions(+), 81 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed
2020-06-14 2:57 ` [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed Simon Glass
@ 2020-06-29 7:44 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:44 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> Quite a few boards using this SoC family don't use binman, yet
> CONFIG_BINMAN is enabled for all of them. But the option should only be
> enabled if we expect binman to produce an image. Calling binman when the
> device tree is missing, etc. will cause failer.
>
> Add a condition so that CONFIG_BINMAN is only enabled as needed.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> arch/powerpc/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman
2020-06-14 2:57 ` [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman Simon Glass
@ 2020-06-29 7:44 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:44 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> On x86 various files that need to be created by binman. It does not make
> sense to enumerate these in the Makefile. They are described in the
> configuration (devicetree) for each board and we can simply run binman
> (always) to generate them.
>
> Update the Makefile to have a separate, final step which runs binman,
> once all input dependencies are present.
>
> This avoid sprinkling the Makefile with arch-specific code.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 63 ++++++++-----------------------
> arch/arm/dts/rockchip-u-boot.dtsi | 2 +
> 2 files changed, 17 insertions(+), 48 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 875fbb1f1f..9c15dced7d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -916,16 +916,6 @@ INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
> INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
> INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
>
> -ifneq ($(CONFIG_HAS_ROM),)
> -ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
> -INPUTS-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
> -endif
> -endif
> -
> -ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
> -INPUTS-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
> -endif
> -
> # Build a combined spl + u-boot image for sunxi
> ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
> INPUTS-y += u-boot-sunxi-with-spl.bin
> @@ -953,9 +943,13 @@ INPUTS-y += u-boot-with-dtb.bin
> endif
>
> ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
> -INPUTS-y += u-boot-rockchip.bin
> +INPUTS-y += u-boot-rockchip.bin idbloader.img
This change should not belong to this commit
> endif
>
> +INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
> + $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
> + $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
> +
> LDFLAGS_u-boot += $(LDFLAGS_FINAL)
>
> # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
> @@ -1013,7 +1007,14 @@ cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
> PHONY += inputs
> inputs: $(INPUTS-y)
>
> -all: inputs
> +all: .binman_stamp inputs
> +ifeq ($(CONFIG_BINMAN),y)
> + $(call if_changed,binman)
> +endif
> +
> +# Timestamp file to make sure that binman always runs
> +.binman_stamp: FORCE
> + @touch $@
>
> ifeq ($(CONFIG_DEPRECATED),y)
> $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
> @@ -1306,7 +1307,7 @@ quiet_cmd_binman = BINMAN $@
> cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
> --toolpath $(objtree)/tools \
> $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
> - build -u -d u-boot.dtb -O . -m \
> + build -u -d u-boot.dtb -O . -m --allow-missing \
> -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
> $(BINMAN_$(@F))
>
> @@ -1583,27 +1584,11 @@ u-boot-br.bin: u-boot FORCE
> endif
> endif
>
> -# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
> -# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
> -# the middle. This is handled by binman based on an image description in the
> -# board's device tree.
> -ifneq ($(CONFIG_HAS_ROM),)
> -rom: u-boot.rom FORCE
> -
> -refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
> - $(call if_changed,copy)
> -
> quiet_cmd_ldr = LD $@
> cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
> $(filter-out FORCE,$^) -o $@
>
> -rom-deps := u-boot.bin
> ifdef CONFIG_X86
> -rom-deps += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
> - $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
> - $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
> - $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
> -
> OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
> u-boot-x86-start16.bin: u-boot FORCE
> $(call if_changed,objcopy)
> @@ -1612,22 +1597,7 @@ OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
> u-boot-x86-reset16.bin: u-boot FORCE
> $(call if_changed,objcopy)
>
> -else # !CONFIG_X86
> -
> -ifdef CONFIG_SPL
> -rom-deps += spl/u-boot-spl.bin
> -rom-deps += u-boot.img
> -endif
> -
> -ifdef CONFIG_TPL
> -rom-deps += tpl/u-boot-tpl.bin
> -endif
> -
> -endif
> -
> -u-boot.rom: $(rom-deps) FORCE
> - $(call if_changed,binman)
> -endif
> +endif # CONFIG_X86
>
> ifneq ($(CONFIG_ARCH_SUNXI),)
> ifeq ($(CONFIG_ARM64),)
> @@ -1639,9 +1609,6 @@ u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
> endif
> endif
>
> -u-boot-x86-with-spl.bin: spl/u-boot-spl.bin u-boot.bin FORCE
> - $(call if_changed,binman)
> -
> ifneq ($(CONFIG_ARCH_TEGRA),)
> # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
> %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: spl/%-spl %.bin FORCE
> diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
> index 0451db735e..eae3ee715d 100644
> --- a/arch/arm/dts/rockchip-u-boot.dtsi
> +++ b/arch/arm/dts/rockchip-u-boot.dtsi
> @@ -11,6 +11,7 @@
> };
> };
>
> +#ifdef CONFIG_SPL
This change should not belong to this commit
> &binman {
> simple-bin {
> filename = "u-boot-rockchip.bin";
> @@ -25,3 +26,4 @@
> };
> };
> };
> +#endif
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM
2020-06-14 2:57 ` [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM Simon Glass
@ 2020-06-29 7:44 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:44 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> This Kconfig is not needed anymore since U-Boot will build the ROM if the
> required binary blobs exist.
>
> The BUILD_ROM environment variable used to request that the ROM be built.
> Now this always happens if the required binary blobs are available. Update
> it to mean that U-Boot should fail if the ROM cannot be built. This
> behaviour should be compatible with how it used to work.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Kconfig | 7 +++++--
> Makefile | 3 ++-
> configs/qemu-x86_64_defconfig | 1 -
> configs/qemu-x86_defconfig | 1 -
> 4 files changed, 7 insertions(+), 5 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman
2020-06-14 2:57 ` [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman Simon Glass
@ 2020-06-29 7:44 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:44 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> On sunxi various files that need to be created by binman. It does not make
> sense to enumerate these in the Makefile. They are described in the
> configuration (devicetree) for each board and we can simply run binman
> (always) to generate them.
>
> This avoid sprinkling the Makefile with arch-specific code.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 36/49] tegra: Makefile: Drop explicit targets built by binman
2020-06-14 2:57 ` [PATCH v2 36/49] tegra: " Simon Glass
@ 2020-06-29 7:45 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:45 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> On tegra various files that need to be created by binman. It does not make
> sense to enumerate these in the Makefile. They are described in the
> configuration (devicetree) for each board and we can simply run binman
> (always) to generate them.
>
> This avoid sprinkling the Makefile with arch-specific code.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 12 ------------
> 1 file changed, 12 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 37/49] mediatek: Makefile: Drop explicit targets built by binman
2020-06-14 2:57 ` [PATCH v2 37/49] mediatek: " Simon Glass
@ 2020-06-29 7:45 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:45 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> On mediatek various files that need to be created by binman. It does not
> make sense to enumerate these in the Makefile. They are described in the
> configuration (devicetree) for each board and we can simply run binman
> (always) to generate them.
>
> This avoid sprinkling the Makefile with arch-specific code.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 38/49] rockchip: Makefile: Drop explicit targets built by binman
2020-06-14 2:57 ` [PATCH v2 38/49] rockchip: " Simon Glass
@ 2020-06-29 7:45 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:45 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> On rockchip various files that need to be created by binman. It does not
> make sense to enumerate these in the Makefile. They are described in the
> configuration (devicetree) for each board and we can simply run binman
> (always) to generate them.
>
> This avoid sprinkling the Makefile with arch-specific code.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later
2020-06-14 2:57 ` [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later Simon Glass
@ 2020-06-29 7:45 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:45 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> At present this is checked before the config has been loaded by the
> Makefile, so it doesn't work.
>
> Move the check to later.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage
2020-06-14 2:57 ` [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage Simon Glass
@ 2020-06-29 7:45 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 7:45 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> Fix this line which is over the limit.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
2020-06-14 2:57 ` [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR Simon Glass
@ 2020-06-29 8:01 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 8:01 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> This option is used to run arch-specific shell scripts which produce .its
> files which are used to produce FIT images. We already have binman which
> is designed to produce firmware images. It is more powerful and has tests.
>
> So this option should be deprecated and not used. Existing uses should be
> migrated.
>
> Mentions of this in code reviews over the last year or so do not seem to
> have resulted in action, and things are getting worse.
>
> So let's add a warning.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 44/49] rockchip: Convert evb-rk3229 over to use binman
2020-06-14 2:57 ` [PATCH v2 44/49] rockchip: Convert evb-rk3229 " Simon Glass
@ 2020-06-29 8:01 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 8:01 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> At present this board uses a custom script to produce the .its file.
> Update it to use binman instead. Binman can create all the images that
> are needed.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Makefile | 1 +
> configs/evb-rk3229_defconfig | 2 +-
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Makefile b/Makefile
> index 98172a40d8..50f48f786a 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1484,6 +1484,7 @@ ifeq ($(CONFIG_ARM64),y)
> OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
> --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
> u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
> + echo rockchip
debug leftover?
> $(call if_changed,pad_cat)
> endif # CONFIG_ARM64
>
> diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig
> index 4d7beca0b7..9c428fed2a 100644
> --- a/configs/evb-rk3229_defconfig
> +++ b/configs/evb-rk3229_defconfig
> @@ -15,7 +15,7 @@ CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/fit_spl_optee.sh"
> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
> CONFIG_USE_PREBOOT=y
> CONFIG_DEFAULT_FDT_FILE="rk3229-evb.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script
2020-06-14 2:57 ` [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script Simon Glass
@ 2020-06-29 8:01 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 8:01 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> Now that all board use binman instead of this script, drop it.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> arch/arm/mach-rockchip/fit_spl_optee.sh | 84 -------------------------
> 1 file changed, 84 deletions(-)
> delete mode 100755 arch/arm/mach-rockchip/fit_spl_optee.sh
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs
2020-06-14 2:57 ` [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs Simon Glass
@ 2020-06-29 8:01 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 8:01 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> This causes conflicts on chromebook_link64. Move it to after U-Boot where
> there should be plenty of space.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> arch/x86/dts/u-boot.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout
2020-06-14 2:57 ` [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout Simon Glass
@ 2020-06-29 8:01 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 8:01 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> At present the image layout is not correct, since it uses the SDRAM
> address of the 64-bit U-Boot as the ROM address. Fix this.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> configs/chromebook_link64_defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 48/49] x86: chromebook_panther: Correct the image layout
2020-06-14 2:57 ` [PATCH v2 48/49] x86: chromebook_panther: " Simon Glass
@ 2020-06-29 8:01 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 8:01 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> This board does not have microcode but at present that is not supported
> by Kconfig nor the binman image layout. Fix both of these.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> arch/x86/Kconfig | 7 ++++++-
> arch/x86/dts/u-boot.dtsi | 6 +++++-
> configs/chromebox_panther_defconfig | 2 ++
> 3 files changed, 13 insertions(+), 2 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 49/49] x86: chromebook_samus_tpl: Correct the image layout
2020-06-14 2:57 ` [PATCH v2 49/49] x86: chromebook_samus_tpl: " Simon Glass
@ 2020-06-29 8:01 ` Bin Meng
0 siblings, 0 replies; 93+ messages in thread
From: Bin Meng @ 2020-06-29 8:01 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2020 at 10:58 AM Simon Glass <sjg@chromium.org> wrote:
>
> At present there is not enough space for U-Boot due to the EFI loader.
> Correct this.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Add patches to partially migrate rockchip to use binman
>
> configs/chromebook_samus_tpl_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman
2020-06-14 2:57 ` [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman Simon Glass
@ 2020-07-07 11:56 ` Kever Yang
2020-07-10 0:35 ` Simon Glass
2020-07-08 1:03 ` Kever Yang
1 sibling, 1 reply; 93+ messages in thread
From: Kever Yang @ 2020-07-07 11:56 UTC (permalink / raw)
To: u-boot
Hi Simon,
??? Thanks for this patch.
On 2020/6/14 ??10:57, Simon Glass wrote:
> At present this board uses a custom script to produce the .its file.
> Update it to use binman instead. Binman can create all the images that
> are needed.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> (no changes since v1)
>
> Kconfig | 2 +-
> arch/arm/dts/rk322x-u-boot.dtsi | 72 +++++++++++++++++++++++++++++++++
> arch/arm/dts/rk322x.dtsi | 1 +
> arch/arm/dts/rk3288-u-boot.dtsi | 1 +
> configs/evb-rk3288_defconfig | 2 +-
> 5 files changed, 76 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/dts/rk322x-u-boot.dtsi
>
> diff --git a/Kconfig b/Kconfig
> index a548de43fb..6e874709a6 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -285,7 +285,7 @@ config BUILD_TARGET
> default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
> default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
> default "u-boot-elf.srec" if RCAR_GEN3
> - default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
> + default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
> ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
> default "u-boot.kwb" if ARCH_KIRKWOOD
> default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
> diff --git a/arch/arm/dts/rk322x-u-boot.dtsi b/arch/arm/dts/rk322x-u-boot.dtsi
> new file mode 100644
> index 0000000000..5a18816d5e
> --- /dev/null
> +++ b/arch/arm/dts/rk322x-u-boot.dtsi
This suppose to be available for all 32bit soc on rockchip who want to
support optee, maybe we
can use a more readable name for this and used for different SoCs?
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 Google LLC
> + */
> +
> +#ifdef CONFIG_SPL_OPTEE
> +
> +/ {
> + binman: binman {
> + multiple-images;
> + };
> +};
> +
> +#include <config.h>
> +
> +&binman {
> + itb {
> + filename = "u-boot.itb";
> + fit {
> + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> + description = "FIT image with OP-TEE support";
> + #address-cells = <1>;
> +
> + images {
> + uboot {
> + description = "U-Boot";
> + type = "standalone";
> + os = "U-Boot";
> + arch = "arm";
> + compression = "none";
> + load = <CONFIG_SYS_TEXT_BASE>;
> +
> + u-boot-nodtb {
> + };
> + };
> + optee {
> + description = "OP-TEE";
> + type = "firmware";
> + arch = "arm";
> + os = "tee";
> + compression = "none";
> + load = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
> + entry = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
> +
> + blob-ext {
> + filename = "tee.bin";
> + };
> + };
> + fdt {
> + description = CONFIG_SYS_BOARD;
> + type = "flat_dt";
> + compression = "none";
> +
> + u-boot-dtb {
> + };
> + };
> + };
> +
> + configurations {
> + default = "conf";
> + conf {
> + description = CONFIG_SYS_BOARD;
> + firmware = "optee";
> + loadables = "uboot";
> + fdt = "fdt";
> + };
> + };
> + };
> + };
> +};
> +
> +#endif
> diff --git a/arch/arm/dts/rk322x.dtsi b/arch/arm/dts/rk322x.dtsi
> index 4a8be5dabb..1a2e8d1b99 100644
> --- a/arch/arm/dts/rk322x.dtsi
> +++ b/arch/arm/dts/rk322x.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/pinctrl/rockchip.h>
> #include <dt-bindings/clock/rk3228-cru.h>
> #include <dt-bindings/thermal/thermal.h>
> +#include "rk322x-u-boot.dtsi"
>
> / {
> #address-cells = <1>;
> diff --git a/arch/arm/dts/rk3288-u-boot.dtsi b/arch/arm/dts/rk3288-u-boot.dtsi
> index 104a5392bf..903bee1bcc 100644
> --- a/arch/arm/dts/rk3288-u-boot.dtsi
> +++ b/arch/arm/dts/rk3288-u-boot.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include "rockchip-u-boot.dtsi"
> +#include "rk322x-u-boot.dtsi"
rk322x is for rk3228 and rk3229, so it's not a good idea to add a
rk322x- dtsi here.
Thanks,
- Kever
>
> / {
> chosen {
> diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig
> index 350189fc63..cd03767bd5 100644
> --- a/configs/evb-rk3288_defconfig
> +++ b/configs/evb-rk3288_defconfig
> @@ -14,7 +14,7 @@ CONFIG_DEBUG_UART=y
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/fit_spl_optee.sh"
> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
> CONFIG_USE_PREBOOT=y
> CONFIG_SILENT_CONSOLE=y
> CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman
2020-06-14 2:57 ` [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman Simon Glass
2020-07-07 11:56 ` Kever Yang
@ 2020-07-08 1:03 ` Kever Yang
2020-07-10 0:35 ` Simon Glass
1 sibling, 1 reply; 93+ messages in thread
From: Kever Yang @ 2020-07-08 1:03 UTC (permalink / raw)
To: u-boot
Hi Simon,
On 2020/6/14 ??10:57, Simon Glass wrote:
> + optee {
> + description = "OP-TEE";
> + type = "firmware";
> + arch = "arm";
> + os = "tee";
> + compression = "none";
> + load = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
> + entry = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
> +
> + blob-ext {
> + filename = "tee.bin";
> + };
> + };
We are using environment for tee.bin so that we don't have to copy it
U-Boot directory,
how does this work in binman?
Thanks,
- Kever
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards
2020-06-29 7:30 ` Bin Meng
@ 2020-07-10 0:35 ` Simon Glass
0 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-07-10 0:35 UTC (permalink / raw)
To: u-boot
Hi Bin,
On Mon, 29 Jun 2020 at 01:30, Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Hi Simon,
>
> On Sun, Jun 14, 2020 at 10:57 AM Simon Glass <sjg@chromium.org> wrote:
> >
> > Some non-x86 devices can use SPI flash to boot and need to produce images
> > of a fixed size to program the flash.
> >
> > Add a way to handle this for non-x86 boards.
> >
> > Signed-off-by: Simon Glass <sjg@chromium.org>
> > ---
> >
> > (no changes since v1)
> >
> > Makefile | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/Makefile b/Makefile
> > index 8a2bb94f2c..07c237120d 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -1607,6 +1607,18 @@ u-boot-x86-start16.bin: u-boot FORCE
> > OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
> > u-boot-x86-reset16.bin: u-boot FORCE
> > $(call if_changed,objcopy)
> > +
> > +else # !CONFIG_X86
> > +
> > +ifdef CONFIG_SPL
> > +rom-deps += spl/u-boot-spl.bin
> > +rom-deps += u-boot.img
>
> Not every platform has a u-boot.img target ?
Those that use binman do enable CONFIG_SPL_FRAMEWORK so this is always
generated.
I'll add a comment.
Regards,
SImon
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman
2020-07-08 1:03 ` Kever Yang
@ 2020-07-10 0:35 ` Simon Glass
0 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-07-10 0:35 UTC (permalink / raw)
To: u-boot
Hi Kever,
On Tue, 7 Jul 2020 at 19:03, Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Hi Simon,
>
> On 2020/6/14 ??10:57, Simon Glass wrote:
> > + optee {
> > + description = "OP-TEE";
> > + type = "firmware";
> > + arch = "arm";
> > + os = "tee";
> > + compression = "none";
> > + load = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
> > + entry = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
> > +
> > + blob-ext {
> > + filename = "tee.bin";
> > + };
> > + };
>
> We are using environment for tee.bin so that we don't have to copy it
> U-Boot directory,
>
> how does this work in binman?
You can use -I to specify an extra 'input directory' where the tee.bin is.
We could have the BL31 env var do that perhaps?
Regards,
Simon
^ permalink raw reply [flat|nested] 93+ messages in thread
* [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman
2020-07-07 11:56 ` Kever Yang
@ 2020-07-10 0:35 ` Simon Glass
0 siblings, 0 replies; 93+ messages in thread
From: Simon Glass @ 2020-07-10 0:35 UTC (permalink / raw)
To: u-boot
Hi Kever,
On Tue, 7 Jul 2020 at 05:57, Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Hi Simon,
>
> Thanks for this patch.
>
> On 2020/6/14 ??10:57, Simon Glass wrote:
> > At present this board uses a custom script to produce the .its file.
> > Update it to use binman instead. Binman can create all the images that
> > are needed.
> >
> > Signed-off-by: Simon Glass <sjg@chromium.org>
> > ---
> >
> > (no changes since v1)
> >
> > Kconfig | 2 +-
> > arch/arm/dts/rk322x-u-boot.dtsi | 72 +++++++++++++++++++++++++++++++++
> > arch/arm/dts/rk322x.dtsi | 1 +
> > arch/arm/dts/rk3288-u-boot.dtsi | 1 +
> > configs/evb-rk3288_defconfig | 2 +-
> > 5 files changed, 76 insertions(+), 2 deletions(-)
> > create mode 100644 arch/arm/dts/rk322x-u-boot.dtsi
> >
> > diff --git a/Kconfig b/Kconfig
> > index a548de43fb..6e874709a6 100644
> > --- a/Kconfig
> > +++ b/Kconfig
> > @@ -285,7 +285,7 @@ config BUILD_TARGET
> > default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
> > default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
> > default "u-boot-elf.srec" if RCAR_GEN3
> > - default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
> > + default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
> > ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
> > default "u-boot.kwb" if ARCH_KIRKWOOD
> > default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
> > diff --git a/arch/arm/dts/rk322x-u-boot.dtsi b/arch/arm/dts/rk322x-u-boot.dtsi
> > new file mode 100644
> > index 0000000000..5a18816d5e
> > --- /dev/null
> > +++ b/arch/arm/dts/rk322x-u-boot.dtsi
>
> This suppose to be available for all 32bit soc on rockchip who want to
> support optee, maybe we
>
> can use a more readable name for this and used for different SoCs?
OK. So maybe rockchip-optee.dtsi?
Regards,
Simon
^ permalink raw reply [flat|nested] 93+ messages in thread
end of thread, other threads:[~2020-07-10 0:35 UTC | newest]
Thread overview: 93+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-14 2:56 [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
2020-06-14 2:56 ` [PATCH v2 01/49] dm: core Fix long line in device_bind_common() Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 03/49] binman: Output errors to stderr Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 04/49] binman: cbfs: Fix IFWI typo Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 05/49] binman: Correct the search patch for pylibfdt Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 06/49] binman: Specify the toolpath when running test coverage Simon Glass
2020-06-14 2:56 ` [PATCH v2 07/49] binman: Add support for calling mkimage Simon Glass
2020-06-14 2:56 ` [PATCH v2 08/49] binman: Fix a few typos in the entry docs Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build Simon Glass
2020-06-29 6:21 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 10/49] binman: Re-enable concurrent tests Simon Glass
2020-06-14 2:56 ` [PATCH v2 11/49] binman: Use super() instead of specifying parent type Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 12/49] binman: Add an etype for external binary blobs Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 14/49] binman: Allow external binaries to be missing Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 15/49] patman: Update errors and warnings to use stderr Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 16/49] binman: Detect when valid images are not produced Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 17/49] binman: Allow missing Intel blobs Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 18/49] binman: Allow zero-length entries to overlap Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp Simon Glass
2020-06-29 6:54 ` Bin Meng
2020-06-14 2:56 ` [PATCH v2 20/49] dtoc: Allow adding variable-sized data to a dtb Simon Glass
2020-06-14 2:57 ` [PATCH v2 21/49] binman: Add support for generating a FIT Simon Glass
2020-06-14 2:57 ` [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works Simon Glass
2020-06-29 7:30 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 23/49] rockchip: Allow Bob to use SPI boot Simon Glass
2020-06-14 2:57 ` [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards Simon Glass
2020-06-29 7:30 ` Bin Meng
2020-07-10 0:35 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 25/49] rockchip: jerry: Add serial support Simon Glass
2020-06-14 2:57 ` [PATCH v2 26/49] rockchip: bob: Support SPI-flash booting Simon Glass
2020-06-14 2:57 ` [PATCH v2 27/49] rockchip: Enable building a SPI ROM image on jerry Simon Glass
2020-06-14 2:57 ` [PATCH v2 28/49] rockchip: Enable building a SPI ROM image on bob Simon Glass
2020-06-14 2:57 ` [PATCH v2 29/49] tegra: Drop the unused non-binman code Simon Glass
2020-06-15 22:02 ` Stephen Warren
2020-06-16 13:44 ` Simon Glass
2020-06-17 22:32 ` Stephen Warren
2020-06-14 2:57 ` [PATCH v2 30/49] tegra: Don't enable binman on ARMv8 SoCs Simon Glass
2020-06-14 2:57 ` [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman Simon Glass
2020-06-29 7:44 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 36/49] tegra: " Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 37/49] mediatek: " Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 38/49] rockchip: " Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage Simon Glass
2020-06-29 7:45 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 41/49] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty Simon Glass
2020-06-14 2:57 ` [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman Simon Glass
2020-07-07 11:56 ` Kever Yang
2020-07-10 0:35 ` Simon Glass
2020-07-08 1:03 ` Kever Yang
2020-07-10 0:35 ` Simon Glass
2020-06-14 2:57 ` [PATCH v2 44/49] rockchip: Convert evb-rk3229 " Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 48/49] x86: chromebook_panther: " Simon Glass
2020-06-29 8:01 ` Bin Meng
2020-06-14 2:57 ` [PATCH v2 49/49] x86: chromebook_samus_tpl: " Simon Glass
2020-06-29 8:01 ` Bin Meng
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.