All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/3] ath9k: remove stray backslash in Makefile
@ 2017-11-27 17:56 ` Matthias Schiffer
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: ath9k-devel, ath10k, linux-wireless, netdev, linux-kernel, nbd

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
 drivers/net/wireless/ath/ath9k/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 36a40ffdce15..90e4a341076c 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
 obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
 ath9k_common-y:=	common.o \
 			common-init.o \
-			common-beacon.o \
+			common-beacon.o
 
 ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
 					     common-spectral.o
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 1/3] ath9k: remove stray backslash in Makefile
@ 2017-11-27 17:56 ` Matthias Schiffer
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, nbd

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
 drivers/net/wireless/ath/ath9k/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 36a40ffdce15..90e4a341076c 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
 obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
 ath9k_common-y:=	common.o \
 			common-init.o \
-			common-beacon.o \
+			common-beacon.o
 
 ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
 					     common-spectral.o
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 1/3] ath9k: remove stray backslash in Makefile
@ 2017-11-27 17:56 ` Matthias Schiffer
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, nbd

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
 drivers/net/wireless/ath/ath9k/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 36a40ffdce15..90e4a341076c 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
 obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
 ath9k_common-y:=	common.o \
 			common-init.o \
-			common-beacon.o \
+			common-beacon.o
 
 ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
 					     common-spectral.o
-- 
2.15.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 2/3] ath9k: move spectral scan support under a separate config symbol
  2017-11-27 17:56 ` Matthias Schiffer
  (?)
@ 2017-11-27 17:56   ` Matthias Schiffer
  -1 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: ath9k-devel, ath10k, linux-wireless, netdev, linux-kernel, nbd

At the moment, spectral scan support, and with it RELAY, is always enabled
with ATH9K[_HTC]_DEBUGFS. Spectral scan support is currently the only user
of RELAY in ath9k, and it unconditionally reserves a relay channel.

Having debugfs support in ath9k is often useful even on very small embedded
routers, where we'd rather like to avoid the code size and RAM usage of the
relay support.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
 drivers/net/wireless/ath/ath9k/Kconfig           | 14 ++++++++++----
 drivers/net/wireless/ath/ath9k/Makefile          |  4 ++--
 drivers/net/wireless/ath/ath9k/common-spectral.h |  4 ++--
 3 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 783a38f1a626..1f3523019509 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -61,13 +61,12 @@ config ATH9K_DEBUGFS
 	depends on ATH9K && DEBUG_FS
 	select MAC80211_DEBUGFS
 	select ATH9K_COMMON_DEBUG
-	select RELAY
 	---help---
 	  Say Y, if you need access to ath9k's statistics for
 	  interrupts, rate control, etc.
 
-	  Also required for changing debug message flags at run time.
-	  As well as access to the FFT/spectral data and TX99.
+	  Also required for changing debug message flags at run time and for
+	  TX99.
 
 config ATH9K_STATION_STATISTICS
 	bool "Detailed station statistics"
@@ -177,7 +176,6 @@ config ATH9K_HTC_DEBUGFS
 	bool "Atheros ath9k_htc debugging"
 	depends on ATH9K_HTC && DEBUG_FS
 	select ATH9K_COMMON_DEBUG
-	select RELAY
 	---help---
 	  Say Y, if you need access to ath9k_htc's statistics.
 	  As well as access to the FFT/spectral data.
@@ -192,3 +190,11 @@ config ATH9K_HWRNG
 
 	  Say Y, feeds the entropy directly from the WiFi driver to the input
 	  pool.
+
+config ATH9K_COMMON_SPECTRAL
+	bool "Atheros ath9k/ath9k_htc spectral scan support"
+	depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
+	select RELAY
+	default n
+	---help---
+	  Say Y to enable access to the FFT/spectral data via debugfs.
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 90e4a341076c..80197101eda7 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -61,8 +61,8 @@ ath9k_common-y:=	common.o \
 			common-init.o \
 			common-beacon.o
 
-ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
-					     common-spectral.o
+ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o
+ath9k_common-$(CONFIG_ATH9K_COMMON_SPECTRAL) += common-spectral.o
 
 ath9k_htc-y +=	htc_hst.o \
 		hif_usb.o \
diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.h b/drivers/net/wireless/ath/ath9k/common-spectral.h
index 5d1a51d83aa6..303ab470ce34 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.h
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.h
@@ -151,7 +151,7 @@ static inline u8 spectral_bitmap_weight(u8 *bins)
 	return bins[0] & 0x3f;
 }
 
-#ifdef CONFIG_ATH9K_COMMON_DEBUG
+#ifdef CONFIG_ATH9K_COMMON_SPECTRAL
 void ath9k_cmn_spectral_init_debug(struct ath_spec_scan_priv *spec_priv, struct dentry *debugfs_phy);
 void ath9k_cmn_spectral_deinit_debug(struct ath_spec_scan_priv *spec_priv);
 
@@ -183,6 +183,6 @@ static inline int ath_cmn_process_fft(struct ath_spec_scan_priv *spec_priv,
 {
 	return 0;
 }
-#endif /* CONFIG_ATH9K_COMMON_DEBUG */
+#endif /* CONFIG_ATH9K_COMMON_SPECTRAL */
 
 #endif /* SPECTRAL_H */
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 2/3] ath9k: move spectral scan support under a separate config symbol
@ 2017-11-27 17:56   ` Matthias Schiffer
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, nbd

At the moment, spectral scan support, and with it RELAY, is always enabled
with ATH9K[_HTC]_DEBUGFS. Spectral scan support is currently the only user
of RELAY in ath9k, and it unconditionally reserves a relay channel.

Having debugfs support in ath9k is often useful even on very small embedded
routers, where we'd rather like to avoid the code size and RAM usage of the
relay support.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
 drivers/net/wireless/ath/ath9k/Kconfig           | 14 ++++++++++----
 drivers/net/wireless/ath/ath9k/Makefile          |  4 ++--
 drivers/net/wireless/ath/ath9k/common-spectral.h |  4 ++--
 3 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 783a38f1a626..1f3523019509 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -61,13 +61,12 @@ config ATH9K_DEBUGFS
 	depends on ATH9K && DEBUG_FS
 	select MAC80211_DEBUGFS
 	select ATH9K_COMMON_DEBUG
-	select RELAY
 	---help---
 	  Say Y, if you need access to ath9k's statistics for
 	  interrupts, rate control, etc.
 
-	  Also required for changing debug message flags at run time.
-	  As well as access to the FFT/spectral data and TX99.
+	  Also required for changing debug message flags at run time and for
+	  TX99.
 
 config ATH9K_STATION_STATISTICS
 	bool "Detailed station statistics"
@@ -177,7 +176,6 @@ config ATH9K_HTC_DEBUGFS
 	bool "Atheros ath9k_htc debugging"
 	depends on ATH9K_HTC && DEBUG_FS
 	select ATH9K_COMMON_DEBUG
-	select RELAY
 	---help---
 	  Say Y, if you need access to ath9k_htc's statistics.
 	  As well as access to the FFT/spectral data.
@@ -192,3 +190,11 @@ config ATH9K_HWRNG
 
 	  Say Y, feeds the entropy directly from the WiFi driver to the input
 	  pool.
+
+config ATH9K_COMMON_SPECTRAL
+	bool "Atheros ath9k/ath9k_htc spectral scan support"
+	depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
+	select RELAY
+	default n
+	---help---
+	  Say Y to enable access to the FFT/spectral data via debugfs.
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 90e4a341076c..80197101eda7 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -61,8 +61,8 @@ ath9k_common-y:=	common.o \
 			common-init.o \
 			common-beacon.o
 
-ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
-					     common-spectral.o
+ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o
+ath9k_common-$(CONFIG_ATH9K_COMMON_SPECTRAL) += common-spectral.o
 
 ath9k_htc-y +=	htc_hst.o \
 		hif_usb.o \
diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.h b/drivers/net/wireless/ath/ath9k/common-spectral.h
index 5d1a51d83aa6..303ab470ce34 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.h
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.h
@@ -151,7 +151,7 @@ static inline u8 spectral_bitmap_weight(u8 *bins)
 	return bins[0] & 0x3f;
 }
 
-#ifdef CONFIG_ATH9K_COMMON_DEBUG
+#ifdef CONFIG_ATH9K_COMMON_SPECTRAL
 void ath9k_cmn_spectral_init_debug(struct ath_spec_scan_priv *spec_priv, struct dentry *debugfs_phy);
 void ath9k_cmn_spectral_deinit_debug(struct ath_spec_scan_priv *spec_priv);
 
@@ -183,6 +183,6 @@ static inline int ath_cmn_process_fft(struct ath_spec_scan_priv *spec_priv,
 {
 	return 0;
 }
-#endif /* CONFIG_ATH9K_COMMON_DEBUG */
+#endif /* CONFIG_ATH9K_COMMON_SPECTRAL */
 
 #endif /* SPECTRAL_H */
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 2/3] ath9k: move spectral scan support under a separate config symbol
@ 2017-11-27 17:56   ` Matthias Schiffer
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, nbd

At the moment, spectral scan support, and with it RELAY, is always enabled
with ATH9K[_HTC]_DEBUGFS. Spectral scan support is currently the only user
of RELAY in ath9k, and it unconditionally reserves a relay channel.

Having debugfs support in ath9k is often useful even on very small embedded
routers, where we'd rather like to avoid the code size and RAM usage of the
relay support.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
 drivers/net/wireless/ath/ath9k/Kconfig           | 14 ++++++++++----
 drivers/net/wireless/ath/ath9k/Makefile          |  4 ++--
 drivers/net/wireless/ath/ath9k/common-spectral.h |  4 ++--
 3 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 783a38f1a626..1f3523019509 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -61,13 +61,12 @@ config ATH9K_DEBUGFS
 	depends on ATH9K && DEBUG_FS
 	select MAC80211_DEBUGFS
 	select ATH9K_COMMON_DEBUG
-	select RELAY
 	---help---
 	  Say Y, if you need access to ath9k's statistics for
 	  interrupts, rate control, etc.
 
-	  Also required for changing debug message flags at run time.
-	  As well as access to the FFT/spectral data and TX99.
+	  Also required for changing debug message flags at run time and for
+	  TX99.
 
 config ATH9K_STATION_STATISTICS
 	bool "Detailed station statistics"
@@ -177,7 +176,6 @@ config ATH9K_HTC_DEBUGFS
 	bool "Atheros ath9k_htc debugging"
 	depends on ATH9K_HTC && DEBUG_FS
 	select ATH9K_COMMON_DEBUG
-	select RELAY
 	---help---
 	  Say Y, if you need access to ath9k_htc's statistics.
 	  As well as access to the FFT/spectral data.
@@ -192,3 +190,11 @@ config ATH9K_HWRNG
 
 	  Say Y, feeds the entropy directly from the WiFi driver to the input
 	  pool.
+
+config ATH9K_COMMON_SPECTRAL
+	bool "Atheros ath9k/ath9k_htc spectral scan support"
+	depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
+	select RELAY
+	default n
+	---help---
+	  Say Y to enable access to the FFT/spectral data via debugfs.
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 90e4a341076c..80197101eda7 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -61,8 +61,8 @@ ath9k_common-y:=	common.o \
 			common-init.o \
 			common-beacon.o
 
-ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
-					     common-spectral.o
+ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o
+ath9k_common-$(CONFIG_ATH9K_COMMON_SPECTRAL) += common-spectral.o
 
 ath9k_htc-y +=	htc_hst.o \
 		hif_usb.o \
diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.h b/drivers/net/wireless/ath/ath9k/common-spectral.h
index 5d1a51d83aa6..303ab470ce34 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.h
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.h
@@ -151,7 +151,7 @@ static inline u8 spectral_bitmap_weight(u8 *bins)
 	return bins[0] & 0x3f;
 }
 
-#ifdef CONFIG_ATH9K_COMMON_DEBUG
+#ifdef CONFIG_ATH9K_COMMON_SPECTRAL
 void ath9k_cmn_spectral_init_debug(struct ath_spec_scan_priv *spec_priv, struct dentry *debugfs_phy);
 void ath9k_cmn_spectral_deinit_debug(struct ath_spec_scan_priv *spec_priv);
 
@@ -183,6 +183,6 @@ static inline int ath_cmn_process_fft(struct ath_spec_scan_priv *spec_priv,
 {
 	return 0;
 }
-#endif /* CONFIG_ATH9K_COMMON_DEBUG */
+#endif /* CONFIG_ATH9K_COMMON_SPECTRAL */
 
 #endif /* SPECTRAL_H */
-- 
2.15.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 3/3] ath10k: move spectral scan support under a separate config symbol
  2017-11-27 17:56 ` Matthias Schiffer
  (?)
@ 2017-11-27 17:56   ` Matthias Schiffer
  -1 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: ath9k-devel, ath10k, linux-wireless, netdev, linux-kernel, nbd

At the moment, spectral scan support, and with it RELAY, is always enabled
with ATH10K_DEBUGFS. Spectral scan support is currently the only user of
RELAY in ath10k, and it unconditionally reserves a relay channel.

Having debugfs support in ath10k is often useful even on very small
embedded routers, where we'd rather like to avoid the code size and RAM
usage of the relay support. While ath10k-based devices usually have more
resources than ath9k-based ones, it makes sense to keep the configuration
symmetric to ath9k, so the same base kernel without RELAY can be used for
both ath9k and ath10k hardware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---

checkpatch.pl wants me to write a more meaningful description for
ATH10K_SPECTRAL, but I don't actually know enough about the spectral scan
feature to do so...

 drivers/net/wireless/ath/ath10k/Kconfig    | 9 ++++++++-
 drivers/net/wireless/ath/ath10k/Makefile   | 2 +-
 drivers/net/wireless/ath/ath10k/spectral.h | 4 ++--
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 87f56d0e17a6..deb5ae21a559 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -47,12 +47,19 @@ config ATH10K_DEBUG
 config ATH10K_DEBUGFS
 	bool "Atheros ath10k debugfs support"
 	depends on ATH10K && DEBUG_FS
-	select RELAY
 	---help---
 	  Enabled debugfs support
 
 	  If unsure, say Y to make it easier to debug problems.
 
+config ATH10K_SPECTRAL
+	bool "Atheros ath10k spectral scan support"
+	depends on ATH10K_DEBUGFS
+	select RELAY
+	default n
+	---help---
+	  Say Y to enable access to the FFT/spectral data via debugfs.
+
 config ATH10K_TRACING
 	bool "Atheros ath10k tracing support"
 	depends on ATH10K
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index 899b9b79f4ce..af8f11970a08 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -14,7 +14,7 @@ ath10k_core-y += mac.o \
 		 p2p.o \
 		 swap.o
 
-ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
+ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o
 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
 ath10k_core-$(CONFIG_THERMAL) += thermal.o
diff --git a/drivers/net/wireless/ath/ath10k/spectral.h b/drivers/net/wireless/ath/ath10k/spectral.h
index 89b0ad769d4f..b2a2e8ae04b8 100644
--- a/drivers/net/wireless/ath/ath10k/spectral.h
+++ b/drivers/net/wireless/ath/ath10k/spectral.h
@@ -44,7 +44,7 @@ enum ath10k_spectral_mode {
 	SPECTRAL_MANUAL,
 };
 
-#ifdef CONFIG_ATH10K_DEBUGFS
+#ifdef CONFIG_ATH10K_SPECTRAL
 
 int ath10k_spectral_process_fft(struct ath10k *ar,
 				struct wmi_phyerr_ev_arg *phyerr,
@@ -85,6 +85,6 @@ static inline void ath10k_spectral_destroy(struct ath10k *ar)
 {
 }
 
-#endif /* CONFIG_ATH10K_DEBUGFS */
+#endif /* CONFIG_ATH10K_SPECTRAL */
 
 #endif /* SPECTRAL_H */
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 3/3] ath10k: move spectral scan support under a separate config symbol
@ 2017-11-27 17:56   ` Matthias Schiffer
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, nbd

At the moment, spectral scan support, and with it RELAY, is always enabled
with ATH10K_DEBUGFS. Spectral scan support is currently the only user of
RELAY in ath10k, and it unconditionally reserves a relay channel.

Having debugfs support in ath10k is often useful even on very small
embedded routers, where we'd rather like to avoid the code size and RAM
usage of the relay support. While ath10k-based devices usually have more
resources than ath9k-based ones, it makes sense to keep the configuration
symmetric to ath9k, so the same base kernel without RELAY can be used for
both ath9k and ath10k hardware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---

checkpatch.pl wants me to write a more meaningful description for
ATH10K_SPECTRAL, but I don't actually know enough about the spectral scan
feature to do so...

 drivers/net/wireless/ath/ath10k/Kconfig    | 9 ++++++++-
 drivers/net/wireless/ath/ath10k/Makefile   | 2 +-
 drivers/net/wireless/ath/ath10k/spectral.h | 4 ++--
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 87f56d0e17a6..deb5ae21a559 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -47,12 +47,19 @@ config ATH10K_DEBUG
 config ATH10K_DEBUGFS
 	bool "Atheros ath10k debugfs support"
 	depends on ATH10K && DEBUG_FS
-	select RELAY
 	---help---
 	  Enabled debugfs support
 
 	  If unsure, say Y to make it easier to debug problems.
 
+config ATH10K_SPECTRAL
+	bool "Atheros ath10k spectral scan support"
+	depends on ATH10K_DEBUGFS
+	select RELAY
+	default n
+	---help---
+	  Say Y to enable access to the FFT/spectral data via debugfs.
+
 config ATH10K_TRACING
 	bool "Atheros ath10k tracing support"
 	depends on ATH10K
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index 899b9b79f4ce..af8f11970a08 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -14,7 +14,7 @@ ath10k_core-y += mac.o \
 		 p2p.o \
 		 swap.o
 
-ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
+ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o
 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
 ath10k_core-$(CONFIG_THERMAL) += thermal.o
diff --git a/drivers/net/wireless/ath/ath10k/spectral.h b/drivers/net/wireless/ath/ath10k/spectral.h
index 89b0ad769d4f..b2a2e8ae04b8 100644
--- a/drivers/net/wireless/ath/ath10k/spectral.h
+++ b/drivers/net/wireless/ath/ath10k/spectral.h
@@ -44,7 +44,7 @@ enum ath10k_spectral_mode {
 	SPECTRAL_MANUAL,
 };
 
-#ifdef CONFIG_ATH10K_DEBUGFS
+#ifdef CONFIG_ATH10K_SPECTRAL
 
 int ath10k_spectral_process_fft(struct ath10k *ar,
 				struct wmi_phyerr_ev_arg *phyerr,
@@ -85,6 +85,6 @@ static inline void ath10k_spectral_destroy(struct ath10k *ar)
 {
 }
 
-#endif /* CONFIG_ATH10K_DEBUGFS */
+#endif /* CONFIG_ATH10K_SPECTRAL */
 
 #endif /* SPECTRAL_H */
-- 
2.15.0

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [PATCH 3/3] ath10k: move spectral scan support under a separate config symbol
@ 2017-11-27 17:56   ` Matthias Schiffer
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Schiffer @ 2017-11-27 17:56 UTC (permalink / raw)
  To: kvalo; +Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, nbd

At the moment, spectral scan support, and with it RELAY, is always enabled
with ATH10K_DEBUGFS. Spectral scan support is currently the only user of
RELAY in ath10k, and it unconditionally reserves a relay channel.

Having debugfs support in ath10k is often useful even on very small
embedded routers, where we'd rather like to avoid the code size and RAM
usage of the relay support. While ath10k-based devices usually have more
resources than ath9k-based ones, it makes sense to keep the configuration
symmetric to ath9k, so the same base kernel without RELAY can be used for
both ath9k and ath10k hardware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---

checkpatch.pl wants me to write a more meaningful description for
ATH10K_SPECTRAL, but I don't actually know enough about the spectral scan
feature to do so...

 drivers/net/wireless/ath/ath10k/Kconfig    | 9 ++++++++-
 drivers/net/wireless/ath/ath10k/Makefile   | 2 +-
 drivers/net/wireless/ath/ath10k/spectral.h | 4 ++--
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 87f56d0e17a6..deb5ae21a559 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -47,12 +47,19 @@ config ATH10K_DEBUG
 config ATH10K_DEBUGFS
 	bool "Atheros ath10k debugfs support"
 	depends on ATH10K && DEBUG_FS
-	select RELAY
 	---help---
 	  Enabled debugfs support
 
 	  If unsure, say Y to make it easier to debug problems.
 
+config ATH10K_SPECTRAL
+	bool "Atheros ath10k spectral scan support"
+	depends on ATH10K_DEBUGFS
+	select RELAY
+	default n
+	---help---
+	  Say Y to enable access to the FFT/spectral data via debugfs.
+
 config ATH10K_TRACING
 	bool "Atheros ath10k tracing support"
 	depends on ATH10K
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index 899b9b79f4ce..af8f11970a08 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -14,7 +14,7 @@ ath10k_core-y += mac.o \
 		 p2p.o \
 		 swap.o
 
-ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
+ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o
 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
 ath10k_core-$(CONFIG_THERMAL) += thermal.o
diff --git a/drivers/net/wireless/ath/ath10k/spectral.h b/drivers/net/wireless/ath/ath10k/spectral.h
index 89b0ad769d4f..b2a2e8ae04b8 100644
--- a/drivers/net/wireless/ath/ath10k/spectral.h
+++ b/drivers/net/wireless/ath/ath10k/spectral.h
@@ -44,7 +44,7 @@ enum ath10k_spectral_mode {
 	SPECTRAL_MANUAL,
 };
 
-#ifdef CONFIG_ATH10K_DEBUGFS
+#ifdef CONFIG_ATH10K_SPECTRAL
 
 int ath10k_spectral_process_fft(struct ath10k *ar,
 				struct wmi_phyerr_ev_arg *phyerr,
@@ -85,6 +85,6 @@ static inline void ath10k_spectral_destroy(struct ath10k *ar)
 {
 }
 
-#endif /* CONFIG_ATH10K_DEBUGFS */
+#endif /* CONFIG_ATH10K_SPECTRAL */
 
 #endif /* SPECTRAL_H */
-- 
2.15.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] ath9k: remove stray backslash in Makefile
  2017-11-27 17:56 ` Matthias Schiffer
@ 2017-11-28  3:35   ` Jakub Kicinski
  -1 siblings, 0 replies; 16+ messages in thread
From: Jakub Kicinski @ 2017-11-28  3:35 UTC (permalink / raw)
  To: Matthias Schiffer
  Cc: kvalo, ath9k-devel, ath10k, linux-wireless, netdev, linux-kernel, nbd

On Mon, 27 Nov 2017 18:56:21 +0100, Matthias Schiffer wrote:
> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
> ---
>  drivers/net/wireless/ath/ath9k/Makefile | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
> index 36a40ffdce15..90e4a341076c 100644
> --- a/drivers/net/wireless/ath/ath9k/Makefile
> +++ b/drivers/net/wireless/ath/ath9k/Makefile
> @@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
>  obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
>  ath9k_common-y:=	common.o \
>  			common-init.o \
> -			common-beacon.o \
> +			common-beacon.o
>  

It's not necessarily stray, there is nothing on the next line so it's
OK, and if you add \ at the end of all lines, you don't have to touch
the last line every time you add/remove something.  Sort of like
putting a , after last enum value.

Just my $.02, not that I mind either way :)

>  ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
>  					     common-spectral.o

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] ath9k: remove stray backslash in Makefile
@ 2017-11-28  3:35   ` Jakub Kicinski
  0 siblings, 0 replies; 16+ messages in thread
From: Jakub Kicinski @ 2017-11-28  3:35 UTC (permalink / raw)
  To: Matthias Schiffer
  Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, kvalo, nbd

On Mon, 27 Nov 2017 18:56:21 +0100, Matthias Schiffer wrote:
> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
> ---
>  drivers/net/wireless/ath/ath9k/Makefile | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
> index 36a40ffdce15..90e4a341076c 100644
> --- a/drivers/net/wireless/ath/ath9k/Makefile
> +++ b/drivers/net/wireless/ath/ath9k/Makefile
> @@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
>  obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
>  ath9k_common-y:=	common.o \
>  			common-init.o \
> -			common-beacon.o \
> +			common-beacon.o
>  

It's not necessarily stray, there is nothing on the next line so it's
OK, and if you add \ at the end of all lines, you don't have to touch
the last line every time you add/remove something.  Sort of like
putting a , after last enum value.

Just my $.02, not that I mind either way :)

>  ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
>  					     common-spectral.o


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] ath9k: remove stray backslash in Makefile
  2017-11-28  3:35   ` Jakub Kicinski
  (?)
@ 2017-12-07 14:30     ` Kalle Valo
  -1 siblings, 0 replies; 16+ messages in thread
From: Kalle Valo @ 2017-12-07 14:30 UTC (permalink / raw)
  To: Jakub Kicinski
  Cc: Matthias Schiffer, ath9k-devel, ath10k, linux-wireless, netdev,
	linux-kernel, nbd

Jakub Kicinski <kubakici@wp.pl> writes:

> On Mon, 27 Nov 2017 18:56:21 +0100, Matthias Schiffer wrote:
>> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
>> ---
>>  drivers/net/wireless/ath/ath9k/Makefile | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>=20
>> diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wirel=
ess/ath/ath9k/Makefile
>> index 36a40ffdce15..90e4a341076c 100644
>> --- a/drivers/net/wireless/ath/ath9k/Makefile
>> +++ b/drivers/net/wireless/ath/ath9k/Makefile
>> @@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) +=3D ath9k_hw.o
>>  obj-$(CONFIG_ATH9K_COMMON) +=3D ath9k_common.o
>>  ath9k_common-y:=3D	common.o \
>>  			common-init.o \
>> -			common-beacon.o \
>> +			common-beacon.o
>> =20
>
> It's not necessarily stray, there is nothing on the next line so it's
> OK, and if you add \ at the end of all lines, you don't have to touch
> the last line every time you add/remove something.  Sort of like
> putting a , after last enum value.

I agree with Jakub, I think the backslash is there on purpose so I
dropped this patch.

--=20
Kalle Valo=

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] ath9k: remove stray backslash in Makefile
@ 2017-12-07 14:30     ` Kalle Valo
  0 siblings, 0 replies; 16+ messages in thread
From: Kalle Valo @ 2017-12-07 14:30 UTC (permalink / raw)
  To: Jakub Kicinski
  Cc: Matthias Schiffer, ath9k-devel, ath10k, linux-wireless, netdev,
	linux-kernel, nbd

Jakub Kicinski <kubakici@wp.pl> writes:

> On Mon, 27 Nov 2017 18:56:21 +0100, Matthias Schiffer wrote:
>> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
>> ---
>>  drivers/net/wireless/ath/ath9k/Makefile | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
>> index 36a40ffdce15..90e4a341076c 100644
>> --- a/drivers/net/wireless/ath/ath9k/Makefile
>> +++ b/drivers/net/wireless/ath/ath9k/Makefile
>> @@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
>>  obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
>>  ath9k_common-y:=	common.o \
>>  			common-init.o \
>> -			common-beacon.o \
>> +			common-beacon.o
>>  
>
> It's not necessarily stray, there is nothing on the next line so it's
> OK, and if you add \ at the end of all lines, you don't have to touch
> the last line every time you add/remove something.  Sort of like
> putting a , after last enum value.

I agree with Jakub, I think the backslash is there on purpose so I
dropped this patch.

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] ath9k: remove stray backslash in Makefile
@ 2017-12-07 14:30     ` Kalle Valo
  0 siblings, 0 replies; 16+ messages in thread
From: Kalle Valo @ 2017-12-07 14:30 UTC (permalink / raw)
  To: Jakub Kicinski
  Cc: netdev, linux-wireless, linux-kernel, ath10k, ath9k-devel,
	Matthias Schiffer, nbd

Jakub Kicinski <kubakici@wp.pl> writes:

> On Mon, 27 Nov 2017 18:56:21 +0100, Matthias Schiffer wrote:
>> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
>> ---
>>  drivers/net/wireless/ath/ath9k/Makefile | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
>> index 36a40ffdce15..90e4a341076c 100644
>> --- a/drivers/net/wireless/ath/ath9k/Makefile
>> +++ b/drivers/net/wireless/ath/ath9k/Makefile
>> @@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
>>  obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
>>  ath9k_common-y:=	common.o \
>>  			common-init.o \
>> -			common-beacon.o \
>> +			common-beacon.o
>>  
>
> It's not necessarily stray, there is nothing on the next line so it's
> OK, and if you add \ at the end of all lines, you don't have to touch
> the last line every time you add/remove something.  Sort of like
> putting a , after last enum value.

I agree with Jakub, I think the backslash is there on purpose so I
dropped this patch.

-- 
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [2/3] ath9k: move spectral scan support under a separate config symbol
  2017-11-27 17:56   ` Matthias Schiffer
@ 2017-12-07 14:32     ` Kalle Valo
  -1 siblings, 0 replies; 16+ messages in thread
From: Kalle Valo @ 2017-12-07 14:32 UTC (permalink / raw)
  To: Matthias Schiffer
  Cc: ath9k-devel, ath10k, linux-wireless, netdev, linux-kernel, nbd

Matthias Schiffer <mschiffer@universe-factory.net> wrote:

> At the moment, spectral scan support, and with it RELAY, is always enabled
> with ATH9K[_HTC]_DEBUGFS. Spectral scan support is currently the only user
> of RELAY in ath9k, and it unconditionally reserves a relay channel.
> 
> Having debugfs support in ath9k is often useful even on very small embedded
> routers, where we'd rather like to avoid the code size and RAM usage of the
> relay support.
> 
> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

2 patches applied to ath-next branch of ath.git, thanks.

9df7ddc3ed25 ath9k: move spectral scan support under a separate config symbol
42e01cb9cb10 ath10k: move spectral scan support under a separate config symbol

-- 
https://patchwork.kernel.org/patch/10077735/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [2/3] ath9k: move spectral scan support under a separate config symbol
@ 2017-12-07 14:32     ` Kalle Valo
  0 siblings, 0 replies; 16+ messages in thread
From: Kalle Valo @ 2017-12-07 14:32 UTC (permalink / raw)
  To: Matthias Schiffer
  Cc: netdev, linux-wireless, ath9k-devel, ath10k, linux-kernel, nbd

Matthias Schiffer <mschiffer@universe-factory.net> wrote:

> At the moment, spectral scan support, and with it RELAY, is always enabled
> with ATH9K[_HTC]_DEBUGFS. Spectral scan support is currently the only user
> of RELAY in ath9k, and it unconditionally reserves a relay channel.
> 
> Having debugfs support in ath9k is often useful even on very small embedded
> routers, where we'd rather like to avoid the code size and RAM usage of the
> relay support.
> 
> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

2 patches applied to ath-next branch of ath.git, thanks.

9df7ddc3ed25 ath9k: move spectral scan support under a separate config symbol
42e01cb9cb10 ath10k: move spectral scan support under a separate config symbol

-- 
https://patchwork.kernel.org/patch/10077735/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 16+ messages in thread
end of thread, other threads:[~2017-12-07 14:33 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-27 17:56 [PATCH 1/3] ath9k: remove stray backslash in Makefile Matthias Schiffer
2017-11-27 17:56 ` Matthias Schiffer
2017-11-27 17:56 ` Matthias Schiffer
2017-11-27 17:56 ` [PATCH 2/3] ath9k: move spectral scan support under a separate config symbol Matthias Schiffer
2017-11-27 17:56   ` Matthias Schiffer
2017-11-27 17:56   ` Matthias Schiffer
2017-12-07 14:32   ` [2/3] " Kalle Valo
2017-12-07 14:32     ` Kalle Valo
2017-11-27 17:56 ` [PATCH 3/3] ath10k: " Matthias Schiffer
2017-11-27 17:56   ` Matthias Schiffer
2017-11-27 17:56   ` Matthias Schiffer
2017-11-28  3:35 ` [PATCH 1/3] ath9k: remove stray backslash in Makefile Jakub Kicinski
2017-11-28  3:35   ` Jakub Kicinski
2017-12-07 14:30   ` Kalle Valo
2017-12-07 14:30     ` Kalle Valo
2017-12-07 14:30     ` Kalle Valo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.