* [RESEND PATCH V7 1/5] Documentation: devicetree: watchdog: da9062/61 watchdog timer binding
@ 2017-04-06 8:28 ` Steve Twiss
0 siblings, 0 replies; 3+ messages in thread
From: Steve Twiss @ 2017-04-06 8:28 UTC (permalink / raw)
To: DEVICETREE, Guenter Roeck, LINUX-KERNEL, LINUX-WATCHDOG,
Mark Rutland, Rob Herring, Wim Van Sebroeck
Cc: Dmitry Torokhov, Eduardo Valentin, LINUX-INPUT, LINUX-PM,
Lee Jones, Liam Girdwood, Mark Brown, Support Opensource,
Zhang Rui
From: Steve Twiss <stwiss.opensource@diasemi.com>
Add binding information for DA9062 and DA9061 watchdog.
Example bindings for both DA9062 and DA9061 devices are added. For
the DA9061 device, a fallback compatible line is added as a valid
combination of compatible strings.
The original binding for DA9062 (only) used to reside inside the
Documentation/devicetree/bindings/mfd/da9062.txt MFD document.
The da9062-watchdog section was deleted in that file and replaced
with a link to the new DA9061/62 binding information stored in this
patch.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
---
Hi,
I have just noticed.
The driver code changes for the da9062/61 watchdog have been applied to
the linux kernel. The da9062/61 alterations for
drivers/watchdog/da9062_wdt.c appear in linux-stable/v4.10-rc1. Those
changes are linked to this binding patch, but this patch seems to have
been missed out.
The source code dependency for this patch is given in the commit:
72106c1 v4.10-rc1 watchdog: da9062/61: watchdog driver
I don't see anything blocking for merge of this patch now.
Regards,
Steve
This patch applies against linux-next and v4.11-rc3
v6 -> v7
- NO CODE CHANGE
v5 -> v6
- NO CODE CHANGE
- Rebased from v4.9 to v4.11-rc3
v4 -> v5
- NO CODE CHANGE
- Rebased from v4.8 to v4.9
v3 -> v4
- NO CODE CHANGE
- Patch renamed from [PATCH V3 2/9] to [PATCH V4 1/8]
- Added Acked-by Rob Herring
v2 -> v3
- Patch renamed from [PATCH V1 02/10] to [PATCH V3 2/9]
- Each compatible line should be a valid combination of compatible
strings, alter DA9061 line to include the fall back compatible string
- Update the commit message to describe this change
- Add information about associated patches from this set without
describing them as being explicitly dependent on this binding
v1 -> v2
- Patch renamed from [PATCH V1 07/10] to [PATCH V2 02/10] -- these
changes were made to fix checkpatch warnings caused by the patch
set dependency order
- Updated the patch description to be explicit about where parts of
this binding had originally been stored
- A second example for DA9061 is provided to highlight the use of a
fall-back compatible option for the DA9062 watchdog driver
As previously:
For the watchdog case: the DA9062 device driver is compatible with the
DA9061 and for this reason there is minimal change required to the DA9062
watchdog device driver. The example for the DA9061 watchdog shows the
use of a fall-back compatible string.
Other information:
The device driver from this patch set (associated with this binding) is
[PATCH V5 6/8] watchdog: da9061: watchdog driver
Regards,
Steve Twiss, Dialog Semiconductor
.../devicetree/bindings/watchdog/da9062-wdt.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
new file mode 100644
index 0000000..b935b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
@@ -0,0 +1,23 @@
+* Dialog Semiconductor DA9062/61 Watchdog Timer
+
+Required properties:
+
+- compatible: should be one of the following valid compatible string lines:
+ "dlg,da9061-watchdog", "dlg,da9062-watchdog"
+ "dlg,da9062-watchdog"
+
+Example: DA9062
+
+ pmic0: da9062@58 {
+ watchdog {
+ compatible = "dlg,da9062-watchdog";
+ };
+ };
+
+Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver
+
+ pmic0: da9061@58 {
+ watchdog {
+ compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
+ };
+ };
--
end-of-patch for RESEND PATCH V7
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [RESEND PATCH V7 1/5] Documentation: devicetree: watchdog: da9062/61 watchdog timer binding
@ 2017-04-06 8:28 ` Steve Twiss
0 siblings, 0 replies; 3+ messages in thread
From: Steve Twiss @ 2017-04-06 8:28 UTC (permalink / raw)
To: DEVICETREE, Guenter Roeck, LINUX-KERNEL, LINUX-WATCHDOG,
Mark Rutland, Rob Herring, Wim Van Sebroeck
Cc: Dmitry Torokhov, Eduardo Valentin, LINUX-INPUT, LINUX-PM,
Lee Jones, Liam Girdwood, Mark Brown, Support Opensource,
Zhang Rui
From: Steve Twiss <stwiss.opensource-WBD+wuPFNBhBDgjK7y7TUQ@public.gmane.org>
Add binding information for DA9062 and DA9061 watchdog.
Example bindings for both DA9062 and DA9061 devices are added. For
the DA9061 device, a fallback compatible line is added as a valid
combination of compatible strings.
The original binding for DA9062 (only) used to reside inside the
Documentation/devicetree/bindings/mfd/da9062.txt MFD document.
The da9062-watchdog section was deleted in that file and replaced
with a link to the new DA9061/62 binding information stored in this
patch.
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Steve Twiss <stwiss.opensource-WBD+wuPFNBhBDgjK7y7TUQ@public.gmane.org>
---
Hi,
I have just noticed.
The driver code changes for the da9062/61 watchdog have been applied to
the linux kernel. The da9062/61 alterations for
drivers/watchdog/da9062_wdt.c appear in linux-stable/v4.10-rc1. Those
changes are linked to this binding patch, but this patch seems to have
been missed out.
The source code dependency for this patch is given in the commit:
72106c1 v4.10-rc1 watchdog: da9062/61: watchdog driver
I don't see anything blocking for merge of this patch now.
Regards,
Steve
This patch applies against linux-next and v4.11-rc3
v6 -> v7
- NO CODE CHANGE
v5 -> v6
- NO CODE CHANGE
- Rebased from v4.9 to v4.11-rc3
v4 -> v5
- NO CODE CHANGE
- Rebased from v4.8 to v4.9
v3 -> v4
- NO CODE CHANGE
- Patch renamed from [PATCH V3 2/9] to [PATCH V4 1/8]
- Added Acked-by Rob Herring
v2 -> v3
- Patch renamed from [PATCH V1 02/10] to [PATCH V3 2/9]
- Each compatible line should be a valid combination of compatible
strings, alter DA9061 line to include the fall back compatible string
- Update the commit message to describe this change
- Add information about associated patches from this set without
describing them as being explicitly dependent on this binding
v1 -> v2
- Patch renamed from [PATCH V1 07/10] to [PATCH V2 02/10] -- these
changes were made to fix checkpatch warnings caused by the patch
set dependency order
- Updated the patch description to be explicit about where parts of
this binding had originally been stored
- A second example for DA9061 is provided to highlight the use of a
fall-back compatible option for the DA9062 watchdog driver
As previously:
For the watchdog case: the DA9062 device driver is compatible with the
DA9061 and for this reason there is minimal change required to the DA9062
watchdog device driver. The example for the DA9061 watchdog shows the
use of a fall-back compatible string.
Other information:
The device driver from this patch set (associated with this binding) is
[PATCH V5 6/8] watchdog: da9061: watchdog driver
Regards,
Steve Twiss, Dialog Semiconductor
.../devicetree/bindings/watchdog/da9062-wdt.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
new file mode 100644
index 0000000..b935b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
@@ -0,0 +1,23 @@
+* Dialog Semiconductor DA9062/61 Watchdog Timer
+
+Required properties:
+
+- compatible: should be one of the following valid compatible string lines:
+ "dlg,da9061-watchdog", "dlg,da9062-watchdog"
+ "dlg,da9062-watchdog"
+
+Example: DA9062
+
+ pmic0: da9062@58 {
+ watchdog {
+ compatible = "dlg,da9062-watchdog";
+ };
+ };
+
+Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver
+
+ pmic0: da9061@58 {
+ watchdog {
+ compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
+ };
+ };
--
end-of-patch for RESEND PATCH V7
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [RESEND PATCH V7 1/5] Documentation: devicetree: watchdog: da9062/61 watchdog timer binding
2017-04-06 8:28 ` Steve Twiss
(?)
@ 2017-04-06 11:32 ` Guenter Roeck
-1 siblings, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2017-04-06 11:32 UTC (permalink / raw)
To: Steve Twiss, DEVICETREE, LINUX-KERNEL, LINUX-WATCHDOG,
Mark Rutland, Rob Herring, Wim Van Sebroeck
Cc: Dmitry Torokhov, Eduardo Valentin, LINUX-INPUT, LINUX-PM,
Lee Jones, Liam Girdwood, Mark Brown, Support Opensource,
Zhang Rui
On 04/06/2017 01:28 AM, Steve Twiss wrote:
> From: Steve Twiss <stwiss.opensource@diasemi.com>
>
> Add binding information for DA9062 and DA9061 watchdog.
>
> Example bindings for both DA9062 and DA9061 devices are added. For
> the DA9061 device, a fallback compatible line is added as a valid
> combination of compatible strings.
>
> The original binding for DA9062 (only) used to reside inside the
> Documentation/devicetree/bindings/mfd/da9062.txt MFD document.
> The da9062-watchdog section was deleted in that file and replaced
> with a link to the new DA9061/62 binding information stored in this
> patch.
>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
>
> ---
>
> Hi,
>
> I have just noticed.
>
> The driver code changes for the da9062/61 watchdog have been applied to
> the linux kernel. The da9062/61 alterations for
> drivers/watchdog/da9062_wdt.c appear in linux-stable/v4.10-rc1. Those
> changes are linked to this binding patch, but this patch seems to have
> been missed out.
>
> The source code dependency for this patch is given in the commit:
> 72106c1 v4.10-rc1 watchdog: da9062/61: watchdog driver
>
> I don't see anything blocking for merge of this patch now.
>
> Regards,
> Steve
>
> This patch applies against linux-next and v4.11-rc3
>
> v6 -> v7
> - NO CODE CHANGE
>
> v5 -> v6
> - NO CODE CHANGE
> - Rebased from v4.9 to v4.11-rc3
>
> v4 -> v5
> - NO CODE CHANGE
> - Rebased from v4.8 to v4.9
>
> v3 -> v4
> - NO CODE CHANGE
> - Patch renamed from [PATCH V3 2/9] to [PATCH V4 1/8]
> - Added Acked-by Rob Herring
>
> v2 -> v3
> - Patch renamed from [PATCH V1 02/10] to [PATCH V3 2/9]
> - Each compatible line should be a valid combination of compatible
> strings, alter DA9061 line to include the fall back compatible string
> - Update the commit message to describe this change
> - Add information about associated patches from this set without
> describing them as being explicitly dependent on this binding
>
> v1 -> v2
> - Patch renamed from [PATCH V1 07/10] to [PATCH V2 02/10] -- these
> changes were made to fix checkpatch warnings caused by the patch
> set dependency order
> - Updated the patch description to be explicit about where parts of
> this binding had originally been stored
> - A second example for DA9061 is provided to highlight the use of a
> fall-back compatible option for the DA9062 watchdog driver
>
> As previously:
>
> For the watchdog case: the DA9062 device driver is compatible with the
> DA9061 and for this reason there is minimal change required to the DA9062
> watchdog device driver. The example for the DA9061 watchdog shows the
> use of a fall-back compatible string.
>
> Other information:
> The device driver from this patch set (associated with this binding) is
> [PATCH V5 6/8] watchdog: da9061: watchdog driver
>
> Regards,
> Steve Twiss, Dialog Semiconductor
>
>
> .../devicetree/bindings/watchdog/da9062-wdt.txt | 23 ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
>
> diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
> new file mode 100644
> index 0000000..b935b52
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
> @@ -0,0 +1,23 @@
> +* Dialog Semiconductor DA9062/61 Watchdog Timer
> +
> +Required properties:
> +
> +- compatible: should be one of the following valid compatible string lines:
> + "dlg,da9061-watchdog", "dlg,da9062-watchdog"
> + "dlg,da9062-watchdog"
> +
> +Example: DA9062
> +
> + pmic0: da9062@58 {
> + watchdog {
> + compatible = "dlg,da9062-watchdog";
> + };
> + };
> +
> +Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver
> +
> + pmic0: da9061@58 {
> + watchdog {
> + compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
> + };
> + };
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-04-06 11:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <cover.1491467308.git.stwiss.opensource@diasemi.com>
2017-04-06 8:28 ` [RESEND PATCH V7 1/5] Documentation: devicetree: watchdog: da9062/61 watchdog timer binding Steve Twiss
2017-04-06 8:28 ` Steve Twiss
2017-04-06 11:32 ` Guenter Roeck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.