From: "Hu, Jiayu" <jiayu.hu@intel.com>
To: "Ma, WenwuX" <wenwux.ma@intel.com>,
"Li, Xiaoyun" <xiaoyun.li@intel.com>,
"Singh, Aman Deep" <aman.deep.singh@intel.com>,
"Zhang, Yuying" <yuying.zhang@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>,
"He, Xingguang" <xingguang.he@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: RE: [PATCH v3] app/testpmd: perform SW IP checksum for GRO/GSO packets
Date: Thu, 12 May 2022 01:33:45 +0000 [thread overview]
Message-ID: <1d60747946ec4a60bca8f6916d8a1bb5@intel.com> (raw)
In-Reply-To: <20220512010756.29553-1-wenwux.ma@intel.com>
> -----Original Message-----
> From: Ma, WenwuX <wenwux.ma@intel.com>
> Sent: Thursday, May 12, 2022 9:08 AM
> To: Li, Xiaoyun <xiaoyun.li@intel.com>; Singh, Aman Deep
> <aman.deep.singh@intel.com>; Zhang, Yuying <yuying.zhang@intel.com>;
> dev@dpdk.org
> Cc: Hu, Jiayu <jiayu.hu@intel.com>; Wang, Yinan <yinan.wang@intel.com>;
> He, Xingguang <xingguang.he@intel.com>; Ma, WenwuX
> <wenwux.ma@intel.com>; stable@dpdk.org
> Subject: [PATCH v3] app/testpmd: perform SW IP checksum for GRO/GSO
> packets
>
> The GRO/GSO library doesn't re-calculate checksums for merged/fragmented
> packets. If users want the packets to have correct IP checksums, they should
> select HW IP checksum calculation for the port which the packets are
> transmitted to. But if the port doesn't support HW IP checksum, users may
> perform a SW IP checksum. This patch add the code about it.
>
> Fixes: b7091f1dcfbc ("app/testpmd: enable the heavyweight mode TCP/IPv4
> GRO")
> Fixes: 52f38a2055ed ("app/testpmd: enable TCP/IPv4 VxLAN and GRE GSO")
> Cc: stable@dpdk.org
>
> Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
> ---
> app/test-pmd/csumonly.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c index
> 8b6665d6f3..2498ee88a2 100644
> --- a/app/test-pmd/csumonly.c
> +++ b/app/test-pmd/csumonly.c
> @@ -778,6 +778,28 @@ pkt_copy_split(const struct rte_mbuf *pkt)
> return md[0];
> }
>
> +#if defined(RTE_LIB_GRO) || defined(RTE_LIB_GSO)
> +/*
> + * Re-calculate IP checksum for merged/fragmented packets.
> + */
> +static void
> +pkts_ip_csum_recalc(struct rte_mbuf **pkts_burst, const uint16_t
> +nb_pkts, uint64_t tx_offloads) {
> + int i;
> + struct rte_ipv4_hdr *ipv4_hdr;
> + for (i = 0; i < nb_pkts; i++) {
> + if ((pkts_burst[i]->ol_flags & RTE_MBUF_F_TX_IPV4) &&
> + (tx_offloads & RTE_ETH_TX_OFFLOAD_IPV4_CKSUM)
> == 0) {
> + ipv4_hdr = rte_pktmbuf_mtod_offset(pkts_burst[i],
> + struct rte_ipv4_hdr *,
> + pkts_burst[i]->l2_len);
> + ipv4_hdr->hdr_checksum = 0;
> + ipv4_hdr->hdr_checksum =
> rte_ipv4_cksum(ipv4_hdr);
> + }
> + }
> +}
> +#endif
> +
> /*
> * Receive a burst of packets, and for each packet:
> * - parse packet, and try to recognize a supported packet type (1) @@ -
> 1098,6 +1120,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
> fs->gro_times = 0;
> }
> }
> +
> + pkts_ip_csum_recalc(pkts_burst, nb_rx, tx_offloads);
> }
> #endif
>
> @@ -1131,6 +1155,8 @@ pkt_burst_checksum_forward(struct fwd_stream
> *fs)
>
> tx_pkts_burst = gso_segments;
> nb_rx = nb_segments;
> +
> + pkts_ip_csum_recalc(tx_pkts_burst, nb_rx, tx_offloads);
> } else
> #endif
> tx_pkts_burst = pkts_burst;
> --
> 2.25.1
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Thanks,
Jiayu
next prev parent reply other threads:[~2022-05-12 1:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-11 1:37 [PATCH] app/testpmd: perform SW IP checksum for GRO packets Wenwu Ma
2022-05-11 7:27 ` David Marchand
2022-05-11 9:00 ` Ma, WenwuX
2022-05-11 9:35 ` [PATCH v2] app/testpmd: perform SW IP checksum for GRO/GSO packets Wenwu Ma
2022-05-12 1:07 ` [PATCH v3] " Wenwu Ma
2022-05-12 1:33 ` Hu, Jiayu [this message]
2022-05-17 2:56 ` Ling, WeiX
2022-05-17 16:02 ` Zhang, Yuying
2022-05-19 8:23 ` Andrew Rybchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1d60747946ec4a60bca8f6916d8a1bb5@intel.com \
--to=jiayu.hu@intel.com \
--cc=aman.deep.singh@intel.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
--cc=wenwux.ma@intel.com \
--cc=xiaoyun.li@intel.com \
--cc=xingguang.he@intel.com \
--cc=yinan.wang@intel.com \
--cc=yuying.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.