* [PATCH 0/2][v3] Add the ability to do BPF directed error injection @ 2017-11-01 17:00 Josef Bacik 2017-11-01 17:00 ` [PATCH 1/2] bpf: add a bpf_override_function helper Josef Bacik 2017-11-01 17:00 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 0 siblings, 2 replies; 12+ messages in thread From: Josef Bacik @ 2017-11-01 17:00 UTC (permalink / raw) To: rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team I'm sending this through Dave since it'll conflict with other BPF changes in his tree, but since it touches tracing as well Dave would like a review from somebody on the tracing side. v2->v3: - added a ->kprobe_override flag to bpf_prog. - added some sanity checks to disallow attaching bpf progs that have ->kprobe_override set that aren't for ftrace kprobes. - added the trace_kprobe_ftrace helper to check if the trace_event_call is a ftrace kprobe. - renamed bpf_kprobe_state to bpf_kprobe_override, fixed it so we only read this value in the kprobe path, and thus only write to it if we're overriding or clearing the override. v1->v2: - moved things around to make sure that bpf_override_return could really only be used for an ftrace kprobe. - killed the special return values from trace_call_bpf. - renamed pc_modified to bpf_kprobe_state so bpf_override_return could tell if it was being called from an ftrace kprobe context. - reworked the logic in kprobe_perf_func to take advantage of bpf_kprobe_state. - updated the test as per Alexei's review. - Original message - A lot of our error paths are not well tested because we have no good way of injecting errors generically. Some subystems (block, memory) have ways to inject errors, but they are random so it's hard to get reproduceable results. With BPF we can add determinism to our error injection. We can use kprobes and other things to verify we are injecting errors at the exact case we are trying to test. This patch gives us the tool to actual do the error injection part. It is very simple, we just set the return value of the pt_regs we're given to whatever we provide, and then override the PC with a dummy function that simply returns. Right now this only works on x86, but it would be simple enough to expand to other architectures. Thanks, Josef ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] bpf: add a bpf_override_function helper 2017-11-01 17:00 [PATCH 0/2][v3] Add the ability to do BPF directed error injection Josef Bacik @ 2017-11-01 17:00 ` Josef Bacik 2017-11-01 17:18 ` Alexei Starovoitov 2017-11-02 1:08 ` Daniel Borkmann 2017-11-01 17:00 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 1 sibling, 2 replies; 12+ messages in thread From: Josef Bacik @ 2017-11-01 17:00 UTC (permalink / raw) To: rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team; +Cc: Josef Bacik From: Josef Bacik <jbacik@fb.com> Error injection is sloppy and very ad-hoc. BPF could fill this niche perfectly with it's kprobe functionality. We could make sure errors are only triggered in specific call chains that we care about with very specific situations. Accomplish this with the bpf_override_funciton helper. This will modify the probe'd callers return value to the specified value and set the PC to an override function that simply returns, bypassing the originally probed function. This gives us a nice clean way to implement systematic error injection for all of our code paths. Signed-off-by: Josef Bacik <jbacik@fb.com> --- arch/Kconfig | 3 +++ arch/x86/Kconfig | 1 + arch/x86/include/asm/kprobes.h | 4 ++++ arch/x86/include/asm/ptrace.h | 5 +++++ arch/x86/kernel/kprobes/ftrace.c | 14 ++++++++++++++ include/linux/filter.h | 3 ++- include/linux/trace_events.h | 1 + include/uapi/linux/bpf.h | 7 ++++++- kernel/bpf/verifier.c | 2 ++ kernel/events/core.c | 7 +++++++ kernel/trace/Kconfig | 11 +++++++++++ kernel/trace/bpf_trace.c | 33 +++++++++++++++++++++++++++++++++ kernel/trace/trace_kprobe.c | 40 +++++++++++++++++++++++++++++++++------- kernel/trace/trace_probe.h | 2 ++ 14 files changed, 124 insertions(+), 9 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index d789a89cb32c..4fb618082259 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -195,6 +195,9 @@ config HAVE_OPTPROBES config HAVE_KPROBES_ON_FTRACE bool +config HAVE_KPROBE_OVERRIDE + bool + config HAVE_NMI bool diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 971feac13506..5126d2750dd0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -152,6 +152,7 @@ config X86 select HAVE_KERNEL_XZ select HAVE_KPROBES select HAVE_KPROBES_ON_FTRACE + select HAVE_KPROBE_OVERRIDE select HAVE_KRETPROBES select HAVE_KVM select HAVE_LIVEPATCH if X86_64 diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h index 6cf65437b5e5..c6c3b1f4306a 100644 --- a/arch/x86/include/asm/kprobes.h +++ b/arch/x86/include/asm/kprobes.h @@ -67,6 +67,10 @@ extern const int kretprobe_blacklist_size; void arch_remove_kprobe(struct kprobe *p); asmlinkage void kretprobe_trampoline(void); +#ifdef CONFIG_KPROBES_ON_FTRACE +extern void arch_ftrace_kprobe_override_function(struct pt_regs *regs); +#endif + /* Architecture specific copy of original instruction*/ struct arch_specific_insn { /* copy of the original instruction */ diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index 91c04c8e67fa..f04e71800c2f 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -108,6 +108,11 @@ static inline unsigned long regs_return_value(struct pt_regs *regs) return regs->ax; } +static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc) +{ + regs->ax = rc; +} + /* * user_mode(regs) determines whether a register set came from user * mode. On x86_32, this is true if V8086 mode was enabled OR if the diff --git a/arch/x86/kernel/kprobes/ftrace.c b/arch/x86/kernel/kprobes/ftrace.c index 041f7b6dfa0f..3c455bf490cb 100644 --- a/arch/x86/kernel/kprobes/ftrace.c +++ b/arch/x86/kernel/kprobes/ftrace.c @@ -97,3 +97,17 @@ int arch_prepare_kprobe_ftrace(struct kprobe *p) p->ainsn.boostable = false; return 0; } + +asmlinkage void override_func(void); +asm( + ".type override_func, @function\n" + "override_func:\n" + " ret\n" + ".size override_func, .-override_func\n" +); + +void arch_ftrace_kprobe_override_function(struct pt_regs *regs) +{ + regs->ip = (unsigned long)&override_func; +} +NOKPROBE_SYMBOL(arch_ftrace_kprobe_override_function); diff --git a/include/linux/filter.h b/include/linux/filter.h index cdd78a7beaae..dfa44fd74bae 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -458,7 +458,8 @@ struct bpf_prog { locked:1, /* Program image locked? */ gpl_compatible:1, /* Is filter GPL compatible? */ cb_access:1, /* Is control block accessed? */ - dst_needed:1; /* Do we need dst entry? */ + dst_needed:1, /* Do we need dst entry? */ + kprobe_override:1; /* Do we override a kprobe? */ kmemcheck_bitfield_end(meta); enum bpf_prog_type type; /* Type of BPF program */ u32 len; /* Number of filter blocks */ diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h index fc6aeca945db..be8bd5a8efaa 100644 --- a/include/linux/trace_events.h +++ b/include/linux/trace_events.h @@ -522,6 +522,7 @@ do { \ struct perf_event; DECLARE_PER_CPU(struct pt_regs, perf_trace_regs); +DECLARE_PER_CPU(int, bpf_kprobe_override); extern int perf_trace_init(struct perf_event *event); extern void perf_trace_destroy(struct perf_event *event); diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 0b7b54d898bd..1ad5b87a42f6 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -673,6 +673,10 @@ union bpf_attr { * @buf: buf to fill * @buf_size: size of the buf * Return : 0 on success or negative error code + * + * int bpf_override_return(pt_regs, rc) + * @pt_regs: pointer to struct pt_regs + * @rc: the return value to set */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -732,7 +736,8 @@ union bpf_attr { FN(xdp_adjust_meta), \ FN(perf_event_read_value), \ FN(perf_prog_read_value), \ - FN(getsockopt), + FN(getsockopt), \ + FN(override_return), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index d906775e12c1..f8f7927a9152 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -4189,6 +4189,8 @@ static int fixup_bpf_calls(struct bpf_verifier_env *env) prog->dst_needed = 1; if (insn->imm == BPF_FUNC_get_prandom_u32) bpf_user_rnd_init_once(); + if (insn->imm == BPF_FUNC_override_return) + prog->kprobe_override = 1; if (insn->imm == BPF_FUNC_tail_call) { /* If we tail call into other programs, we * cannot make any assumptions since they can diff --git a/kernel/events/core.c b/kernel/events/core.c index 9660ee65fbef..0d7fce52391d 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -8169,6 +8169,13 @@ static int perf_event_set_bpf_prog(struct perf_event *event, u32 prog_fd) return -EINVAL; } + /* Kprobe override only works for kprobes, not uprobes. */ + if (prog->kprobe_override && + !(event->tp_event->flags & TRACE_EVENT_FL_KPROBE)) { + bpf_prog_put(prog); + return -EINVAL; + } + if (is_tracepoint || is_syscall_tp) { int off = trace_event_get_offsets(event->tp_event); diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 434c840e2d82..9dc0deeaad2b 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -518,6 +518,17 @@ config FUNCTION_PROFILER If in doubt, say N. +config BPF_KPROBE_OVERRIDE + bool "Enable BPF programs to override a kprobed function" + depends on BPF_EVENTS + depends on KPROBES_ON_FTRACE + depends on HAVE_KPROBE_OVERRIDE + depends on DYNAMIC_FTRACE_WITH_REGS + default n + help + Allows BPF to override the execution of a probed function and + set a different return value. This is used for error injection. + config FTRACE_MCOUNT_RECORD def_bool y depends on DYNAMIC_FTRACE diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index 136aa6bb0422..430f864bfe6c 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -13,6 +13,10 @@ #include <linux/filter.h> #include <linux/uaccess.h> #include <linux/ctype.h> +#include <linux/kprobes.h> +#include <asm/kprobes.h> + +#include "trace_probe.h" #include "trace.h" u64 bpf_get_stackid(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5); @@ -76,6 +80,29 @@ unsigned int trace_call_bpf(struct trace_event_call *call, void *ctx) } EXPORT_SYMBOL_GPL(trace_call_bpf); +#ifdef CONFIG_BPF_KPROBE_OVERRIDE +BPF_CALL_2(bpf_override_return, struct pt_regs *, regs, unsigned long, rc) +{ + __this_cpu_write(bpf_kprobe_override, 1); + regs_set_return_value(regs, rc); + arch_ftrace_kprobe_override_function(regs); + return 0; +} +#else +BPF_CALL_2(bpf_override_return, struct pt_regs *, regs, unsigned long, rc) +{ + return -EINVAL; +} +#endif + +static const struct bpf_func_proto bpf_override_return_proto = { + .func = bpf_override_return, + .gpl_only = true, + .ret_type = RET_INTEGER, + .arg1_type = ARG_PTR_TO_CTX, + .arg2_type = ARG_ANYTHING, +}; + BPF_CALL_3(bpf_probe_read, void *, dst, u32, size, const void *, unsafe_ptr) { int ret; @@ -551,6 +578,8 @@ static const struct bpf_func_proto *kprobe_prog_func_proto(enum bpf_func_id func return &bpf_get_stackid_proto; case BPF_FUNC_perf_event_read_value: return &bpf_perf_event_read_value_proto; + case BPF_FUNC_override_return: + return &bpf_override_return_proto; default: return tracing_func_proto(func_id); } @@ -766,6 +795,10 @@ int perf_event_attach_bpf_prog(struct perf_event *event, struct bpf_prog_array *new_array; int ret = -EEXIST; + /* Kprobe override only works for ftrace based kprobes. */ + if (prog->kprobe_override && !trace_kprobe_ftrace(event->tp_event)) + return -EINVAL; + mutex_lock(&bpf_event_mutex); if (event->prog) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index abf92e478cfb..8e3c9ec1faf7 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -42,6 +42,7 @@ struct trace_kprobe { (offsetof(struct trace_kprobe, tp.args) + \ (sizeof(struct probe_arg) * (n))) +DEFINE_PER_CPU(int, bpf_kprobe_override); static nokprobe_inline bool trace_kprobe_is_return(struct trace_kprobe *tk) { @@ -87,6 +88,12 @@ static nokprobe_inline unsigned long trace_kprobe_nhit(struct trace_kprobe *tk) return nhit; } +int trace_kprobe_ftrace(struct trace_event_call *call) +{ + struct trace_kprobe *tk = (struct trace_kprobe *)call->data; + return kprobe_ftrace(&tk->rp.kp); +} + static int register_kprobe_event(struct trace_kprobe *tk); static int unregister_kprobe_event(struct trace_kprobe *tk); @@ -1170,7 +1177,7 @@ static int kretprobe_event_define_fields(struct trace_event_call *event_call) #ifdef CONFIG_PERF_EVENTS /* Kprobe profile handler */ -static void +static int kprobe_perf_func(struct trace_kprobe *tk, struct pt_regs *regs) { struct trace_event_call *call = &tk->tp.call; @@ -1179,12 +1186,29 @@ kprobe_perf_func(struct trace_kprobe *tk, struct pt_regs *regs) int size, __size, dsize; int rctx; - if (bpf_prog_array_valid(call) && !trace_call_bpf(call, regs)) - return; + if (bpf_prog_array_valid(call)) { + int ret; + + ret = trace_call_bpf(call, regs); + + /* + * We need to check and see if we modified the pc of the + * pt_regs, and if so clear the kprobe and return 1 so that we + * don't do the instruction skipping. Also reset our state so + * we are clean the next pass through. + */ + if (__this_cpu_read(bpf_kprobe_override)) { + __this_cpu_write(bpf_kprobe_override, 0); + reset_current_kprobe(); + return 1; + } + if (!ret) + return 0; + } head = this_cpu_ptr(call->perf_events); if (hlist_empty(head)) - return; + return 0; dsize = __get_data_size(&tk->tp, regs); __size = sizeof(*entry) + tk->tp.size + dsize; @@ -1193,13 +1217,14 @@ kprobe_perf_func(struct trace_kprobe *tk, struct pt_regs *regs) entry = perf_trace_buf_alloc(size, NULL, &rctx); if (!entry) - return; + return 0; entry->ip = (unsigned long)tk->rp.kp.addr; memset(&entry[1], 0, dsize); store_trace_args(sizeof(*entry), &tk->tp, regs, (u8 *)&entry[1], dsize); perf_trace_buf_submit(entry, size, rctx, call->event.type, 1, regs, head, NULL, NULL); + return 0; } NOKPROBE_SYMBOL(kprobe_perf_func); @@ -1275,6 +1300,7 @@ static int kprobe_register(struct trace_event_call *event, static int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs) { struct trace_kprobe *tk = container_of(kp, struct trace_kprobe, rp.kp); + int ret = 0; raw_cpu_inc(*tk->nhit); @@ -1282,9 +1308,9 @@ static int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs) kprobe_trace_func(tk, regs); #ifdef CONFIG_PERF_EVENTS if (tk->tp.flags & TP_FLAG_PROFILE) - kprobe_perf_func(tk, regs); + ret = kprobe_perf_func(tk, regs); #endif - return 0; /* We don't tweek kernel, so just return 0 */ + return ret; } NOKPROBE_SYMBOL(kprobe_dispatcher); diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h index 903273c93e61..75c58bf059a3 100644 --- a/kernel/trace/trace_probe.h +++ b/kernel/trace/trace_probe.h @@ -362,6 +362,8 @@ extern ssize_t traceprobe_probes_write(struct file *file, extern int traceprobe_command(const char *buf, int (*createfn)(int, char**)); +extern int trace_kprobe_ftrace(struct trace_event_call *call); + /* Sum up total data length for dynamic arraies (strings) */ static nokprobe_inline int __get_data_size(struct trace_probe *tp, struct pt_regs *regs) -- 2.7.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] bpf: add a bpf_override_function helper 2017-11-01 17:00 ` [PATCH 1/2] bpf: add a bpf_override_function helper Josef Bacik @ 2017-11-01 17:18 ` Alexei Starovoitov 2017-11-02 1:08 ` Daniel Borkmann 1 sibling, 0 replies; 12+ messages in thread From: Alexei Starovoitov @ 2017-11-01 17:18 UTC (permalink / raw) To: Josef Bacik, rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team Cc: Josef Bacik On 11/1/17 10:00 AM, Josef Bacik wrote: > From: Josef Bacik <jbacik@fb.com> > > Error injection is sloppy and very ad-hoc. BPF could fill this niche > perfectly with it's kprobe functionality. We could make sure errors are > only triggered in specific call chains that we care about with very > specific situations. Accomplish this with the bpf_override_funciton > helper. This will modify the probe'd callers return value to the > specified value and set the PC to an override function that simply > returns, bypassing the originally probed function. This gives us a nice > clean way to implement systematic error injection for all of our code > paths. > > Signed-off-by: Josef Bacik <jbacik@fb.com> Both bpf and tracing bits look great to me. Acked-by: Alexei Starovoitov <ast@kernel.org> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] bpf: add a bpf_override_function helper 2017-11-01 17:00 ` [PATCH 1/2] bpf: add a bpf_override_function helper Josef Bacik 2017-11-01 17:18 ` Alexei Starovoitov @ 2017-11-02 1:08 ` Daniel Borkmann 1 sibling, 0 replies; 12+ messages in thread From: Daniel Borkmann @ 2017-11-02 1:08 UTC (permalink / raw) To: Josef Bacik, rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team Cc: Josef Bacik On 11/01/2017 06:00 PM, Josef Bacik wrote: > From: Josef Bacik <jbacik@fb.com> > > Error injection is sloppy and very ad-hoc. BPF could fill this niche > perfectly with it's kprobe functionality. We could make sure errors are > only triggered in specific call chains that we care about with very > specific situations. Accomplish this with the bpf_override_funciton > helper. This will modify the probe'd callers return value to the > specified value and set the PC to an override function that simply > returns, bypassing the originally probed function. This gives us a nice > clean way to implement systematic error injection for all of our code > paths. > > Signed-off-by: Josef Bacik <jbacik@fb.com> Looks useful (seccomp/BPF has something similar but on syscall level). I think given we change kernel behavior, it would be good if we emit similar warning like in case of bpf_get_probe_write_proto(), such that from staring at the log (e.g. in case of subsequent crash), it could help identifying that cause to trigger the bug could have been due to bpf_override_function(). ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-11-01 17:00 [PATCH 0/2][v3] Add the ability to do BPF directed error injection Josef Bacik 2017-11-01 17:00 ` [PATCH 1/2] bpf: add a bpf_override_function helper Josef Bacik @ 2017-11-01 17:00 ` Josef Bacik 2017-11-01 17:23 ` Alexei Starovoitov 1 sibling, 1 reply; 12+ messages in thread From: Josef Bacik @ 2017-11-01 17:00 UTC (permalink / raw) To: rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team; +Cc: Josef Bacik From: Josef Bacik <jbacik@fb.com> This adds a basic test for bpf_override_return to verify it works. We override the main function for mounting a btrfs fs so it'll return -ENOMEM and then make sure that trying to mount a btrfs fs will fail. Signed-off-by: Josef Bacik <jbacik@fb.com> --- samples/bpf/Makefile | 4 ++++ samples/bpf/test_override_return.sh | 15 +++++++++++++++ samples/bpf/tracex7_kern.c | 16 ++++++++++++++++ samples/bpf/tracex7_user.c | 28 ++++++++++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 7 ++++++- tools/testing/selftests/bpf/bpf_helpers.h | 3 ++- 6 files changed, 71 insertions(+), 2 deletions(-) create mode 100755 samples/bpf/test_override_return.sh create mode 100644 samples/bpf/tracex7_kern.c create mode 100644 samples/bpf/tracex7_user.c diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index ea2b9e6135f3..83d06bc1f710 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -14,6 +14,7 @@ hostprogs-y += tracex3 hostprogs-y += tracex4 hostprogs-y += tracex5 hostprogs-y += tracex6 +hostprogs-y += tracex7 hostprogs-y += test_probe_write_user hostprogs-y += trace_output hostprogs-y += lathist @@ -58,6 +59,7 @@ tracex3-objs := bpf_load.o $(LIBBPF) tracex3_user.o tracex4-objs := bpf_load.o $(LIBBPF) tracex4_user.o tracex5-objs := bpf_load.o $(LIBBPF) tracex5_user.o tracex6-objs := bpf_load.o $(LIBBPF) tracex6_user.o +tracex7-objs := bpf_load.o $(LIBBPF) tracex7_user.o load_sock_ops-objs := bpf_load.o $(LIBBPF) load_sock_ops.o test_probe_write_user-objs := bpf_load.o $(LIBBPF) test_probe_write_user_user.o trace_output-objs := bpf_load.o $(LIBBPF) trace_output_user.o @@ -100,6 +102,7 @@ always += tracex3_kern.o always += tracex4_kern.o always += tracex5_kern.o always += tracex6_kern.o +always += tracex7_kern.o always += sock_flags_kern.o always += test_probe_write_user_kern.o always += trace_output_kern.o @@ -153,6 +156,7 @@ HOSTLOADLIBES_tracex3 += -lelf HOSTLOADLIBES_tracex4 += -lelf -lrt HOSTLOADLIBES_tracex5 += -lelf HOSTLOADLIBES_tracex6 += -lelf +HOSTLOADLIBES_tracex7 += -lelf HOSTLOADLIBES_test_cgrp2_sock2 += -lelf HOSTLOADLIBES_load_sock_ops += -lelf HOSTLOADLIBES_test_probe_write_user += -lelf diff --git a/samples/bpf/test_override_return.sh b/samples/bpf/test_override_return.sh new file mode 100755 index 000000000000..e68b9ee6814b --- /dev/null +++ b/samples/bpf/test_override_return.sh @@ -0,0 +1,15 @@ +#!/bin/bash + +rm -f testfile.img +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 +DEVICE=$(losetup --show -f testfile.img) +mkfs.btrfs -f $DEVICE +mkdir tmpmnt +./tracex7 $DEVICE +if [ $? -eq 0 ] +then + echo "SUCCESS!" +else + echo "FAILED!" +fi +losetup -d $DEVICE diff --git a/samples/bpf/tracex7_kern.c b/samples/bpf/tracex7_kern.c new file mode 100644 index 000000000000..1ab308a43e0f --- /dev/null +++ b/samples/bpf/tracex7_kern.c @@ -0,0 +1,16 @@ +#include <uapi/linux/ptrace.h> +#include <uapi/linux/bpf.h> +#include <linux/version.h> +#include "bpf_helpers.h" + +SEC("kprobe/open_ctree") +int bpf_prog1(struct pt_regs *ctx) +{ + unsigned long rc = -12; + + bpf_override_return(ctx, rc); + return 0; +} + +char _license[] SEC("license") = "GPL"; +u32 _version SEC("version") = LINUX_VERSION_CODE; diff --git a/samples/bpf/tracex7_user.c b/samples/bpf/tracex7_user.c new file mode 100644 index 000000000000..8a52ac492e8b --- /dev/null +++ b/samples/bpf/tracex7_user.c @@ -0,0 +1,28 @@ +#define _GNU_SOURCE + +#include <stdio.h> +#include <linux/bpf.h> +#include <unistd.h> +#include "libbpf.h" +#include "bpf_load.h" + +int main(int argc, char **argv) +{ + FILE *f; + char filename[256]; + char command[256]; + int ret; + + snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]); + + if (load_bpf_file(filename)) { + printf("%s", bpf_log_buf); + return 1; + } + + snprintf(command, 256, "mount %s tmpmnt/", argv[1]); + f = popen(command, "r"); + ret = pclose(f); + + return ret ? 0 : 1; +} diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 4a4b6e78c977..3756dde69834 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -673,6 +673,10 @@ union bpf_attr { * @buf: buf to fill * @buf_size: size of the buf * Return : 0 on success or negative error code + * + * int bpf_override_return(pt_regs, rc) + * @pt_regs: pointer to struct pt_regs + * @rc: the return value to set */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -732,7 +736,8 @@ union bpf_attr { FN(xdp_adjust_meta), \ FN(perf_event_read_value), \ FN(perf_prog_read_value), \ - FN(getsockopt), + FN(getsockopt), \ + FN(override_return), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index abfa4c5c8527..086733298d5e 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -81,7 +81,8 @@ static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags, static int (*bpf_perf_prog_read_value)(void *ctx, void *buf, unsigned int buf_size) = (void *) BPF_FUNC_perf_prog_read_value; - +static int (*bpf_override_return)(void *ctx, unsigned long rc) = + (void *) BPF_FUNC_override_return; /* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions -- 2.7.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-11-01 17:00 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik @ 2017-11-01 17:23 ` Alexei Starovoitov 0 siblings, 0 replies; 12+ messages in thread From: Alexei Starovoitov @ 2017-11-01 17:23 UTC (permalink / raw) To: Josef Bacik, rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team Cc: Josef Bacik On 11/1/17 10:00 AM, Josef Bacik wrote: > From: Josef Bacik <jbacik@fb.com> > > This adds a basic test for bpf_override_return to verify it works. We > override the main function for mounting a btrfs fs so it'll return > -ENOMEM and then make sure that trying to mount a btrfs fs will fail. > > Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> > +++ b/samples/bpf/test_override_return.sh > @@ -0,0 +1,15 @@ > +#!/bin/bash > + > +rm -f testfile.img > +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 > +DEVICE=$(losetup --show -f testfile.img) > +mkfs.btrfs -f $DEVICE > +mkdir tmpmnt > +./tracex7 $DEVICE > +if [ $? -eq 0 ] > +then > + echo "SUCCESS!" > +else > + echo "FAILED!" > +fi > +losetup -d $DEVICE > diff --git a/samples/bpf/tracex7_kern.c b/samples/bpf/tracex7_kern.c > new file mode 100644 > index 000000000000..1ab308a43e0f > --- /dev/null > +++ b/samples/bpf/tracex7_kern.c > @@ -0,0 +1,16 @@ > +#include <uapi/linux/ptrace.h> > +#include <uapi/linux/bpf.h> > +#include <linux/version.h> > +#include "bpf_helpers.h" > + > +SEC("kprobe/open_ctree") > +int bpf_prog1(struct pt_regs *ctx) > +{ > + unsigned long rc = -12; > + > + bpf_override_return(ctx, rc); > + return 0; > +} great stuff. I wonder in how many kernel test frameworks it will appear in the near future. We can even stress test bpf with bpf. ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 0/2][v5] Add the ability to do BPF directed error injection @ 2017-11-07 20:28 Josef Bacik 2017-11-07 20:28 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 0 siblings, 1 reply; 12+ messages in thread From: Josef Bacik @ 2017-11-07 20:28 UTC (permalink / raw) To: rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team, daniel I'm sending this through Dave since it'll conflict with other BPF changes in his tree, but since it touches tracing as well Dave would like a review from somebody on the tracing side. v4->v5: - disallow kprobe_override programs from being put in the prog map array so we don't tail call into something we didn't check. This allows us to make the normal path still fast without a bunch of percpu operations. v3->v4: - fix a build error found by kbuild test bot (I didn't wait long enough apparently.) - Added a warning message as per Daniels suggestion. v2->v3: - added a ->kprobe_override flag to bpf_prog. - added some sanity checks to disallow attaching bpf progs that have ->kprobe_override set that aren't for ftrace kprobes. - added the trace_kprobe_ftrace helper to check if the trace_event_call is a ftrace kprobe. - renamed bpf_kprobe_state to bpf_kprobe_override, fixed it so we only read this value in the kprobe path, and thus only write to it if we're overriding or clearing the override. v1->v2: - moved things around to make sure that bpf_override_return could really only be used for an ftrace kprobe. - killed the special return values from trace_call_bpf. - renamed pc_modified to bpf_kprobe_state so bpf_override_return could tell if it was being called from an ftrace kprobe context. - reworked the logic in kprobe_perf_func to take advantage of bpf_kprobe_state. - updated the test as per Alexei's review. - Original message - A lot of our error paths are not well tested because we have no good way of injecting errors generically. Some subystems (block, memory) have ways to inject errors, but they are random so it's hard to get reproduceable results. With BPF we can add determinism to our error injection. We can use kprobes and other things to verify we are injecting errors at the exact case we are trying to test. This patch gives us the tool to actual do the error injection part. It is very simple, we just set the return value of the pt_regs we're given to whatever we provide, and then override the PC with a dummy function that simply returns. Right now this only works on x86, but it would be simple enough to expand to other architectures. Thanks, Josef ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-11-07 20:28 [PATCH 0/2][v5] Add the ability to do BPF directed error injection Josef Bacik @ 2017-11-07 20:28 ` Josef Bacik 2017-11-08 2:29 ` Daniel Borkmann 0 siblings, 1 reply; 12+ messages in thread From: Josef Bacik @ 2017-11-07 20:28 UTC (permalink / raw) To: rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team, daniel Cc: Josef Bacik From: Josef Bacik <jbacik@fb.com> This adds a basic test for bpf_override_return to verify it works. We override the main function for mounting a btrfs fs so it'll return -ENOMEM and then make sure that trying to mount a btrfs fs will fail. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Josef Bacik <jbacik@fb.com> --- samples/bpf/Makefile | 4 ++++ samples/bpf/test_override_return.sh | 15 +++++++++++++++ samples/bpf/tracex7_kern.c | 16 ++++++++++++++++ samples/bpf/tracex7_user.c | 28 ++++++++++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 7 ++++++- tools/testing/selftests/bpf/bpf_helpers.h | 3 ++- 6 files changed, 71 insertions(+), 2 deletions(-) create mode 100755 samples/bpf/test_override_return.sh create mode 100644 samples/bpf/tracex7_kern.c create mode 100644 samples/bpf/tracex7_user.c diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index ea2b9e6135f3..83d06bc1f710 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -14,6 +14,7 @@ hostprogs-y += tracex3 hostprogs-y += tracex4 hostprogs-y += tracex5 hostprogs-y += tracex6 +hostprogs-y += tracex7 hostprogs-y += test_probe_write_user hostprogs-y += trace_output hostprogs-y += lathist @@ -58,6 +59,7 @@ tracex3-objs := bpf_load.o $(LIBBPF) tracex3_user.o tracex4-objs := bpf_load.o $(LIBBPF) tracex4_user.o tracex5-objs := bpf_load.o $(LIBBPF) tracex5_user.o tracex6-objs := bpf_load.o $(LIBBPF) tracex6_user.o +tracex7-objs := bpf_load.o $(LIBBPF) tracex7_user.o load_sock_ops-objs := bpf_load.o $(LIBBPF) load_sock_ops.o test_probe_write_user-objs := bpf_load.o $(LIBBPF) test_probe_write_user_user.o trace_output-objs := bpf_load.o $(LIBBPF) trace_output_user.o @@ -100,6 +102,7 @@ always += tracex3_kern.o always += tracex4_kern.o always += tracex5_kern.o always += tracex6_kern.o +always += tracex7_kern.o always += sock_flags_kern.o always += test_probe_write_user_kern.o always += trace_output_kern.o @@ -153,6 +156,7 @@ HOSTLOADLIBES_tracex3 += -lelf HOSTLOADLIBES_tracex4 += -lelf -lrt HOSTLOADLIBES_tracex5 += -lelf HOSTLOADLIBES_tracex6 += -lelf +HOSTLOADLIBES_tracex7 += -lelf HOSTLOADLIBES_test_cgrp2_sock2 += -lelf HOSTLOADLIBES_load_sock_ops += -lelf HOSTLOADLIBES_test_probe_write_user += -lelf diff --git a/samples/bpf/test_override_return.sh b/samples/bpf/test_override_return.sh new file mode 100755 index 000000000000..e68b9ee6814b --- /dev/null +++ b/samples/bpf/test_override_return.sh @@ -0,0 +1,15 @@ +#!/bin/bash + +rm -f testfile.img +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 +DEVICE=$(losetup --show -f testfile.img) +mkfs.btrfs -f $DEVICE +mkdir tmpmnt +./tracex7 $DEVICE +if [ $? -eq 0 ] +then + echo "SUCCESS!" +else + echo "FAILED!" +fi +losetup -d $DEVICE diff --git a/samples/bpf/tracex7_kern.c b/samples/bpf/tracex7_kern.c new file mode 100644 index 000000000000..1ab308a43e0f --- /dev/null +++ b/samples/bpf/tracex7_kern.c @@ -0,0 +1,16 @@ +#include <uapi/linux/ptrace.h> +#include <uapi/linux/bpf.h> +#include <linux/version.h> +#include "bpf_helpers.h" + +SEC("kprobe/open_ctree") +int bpf_prog1(struct pt_regs *ctx) +{ + unsigned long rc = -12; + + bpf_override_return(ctx, rc); + return 0; +} + +char _license[] SEC("license") = "GPL"; +u32 _version SEC("version") = LINUX_VERSION_CODE; diff --git a/samples/bpf/tracex7_user.c b/samples/bpf/tracex7_user.c new file mode 100644 index 000000000000..8a52ac492e8b --- /dev/null +++ b/samples/bpf/tracex7_user.c @@ -0,0 +1,28 @@ +#define _GNU_SOURCE + +#include <stdio.h> +#include <linux/bpf.h> +#include <unistd.h> +#include "libbpf.h" +#include "bpf_load.h" + +int main(int argc, char **argv) +{ + FILE *f; + char filename[256]; + char command[256]; + int ret; + + snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]); + + if (load_bpf_file(filename)) { + printf("%s", bpf_log_buf); + return 1; + } + + snprintf(command, 256, "mount %s tmpmnt/", argv[1]); + f = popen(command, "r"); + ret = pclose(f); + + return ret ? 0 : 1; +} diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 4a4b6e78c977..3756dde69834 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -673,6 +673,10 @@ union bpf_attr { * @buf: buf to fill * @buf_size: size of the buf * Return : 0 on success or negative error code + * + * int bpf_override_return(pt_regs, rc) + * @pt_regs: pointer to struct pt_regs + * @rc: the return value to set */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -732,7 +736,8 @@ union bpf_attr { FN(xdp_adjust_meta), \ FN(perf_event_read_value), \ FN(perf_prog_read_value), \ - FN(getsockopt), + FN(getsockopt), \ + FN(override_return), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index abfa4c5c8527..086733298d5e 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -81,7 +81,8 @@ static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags, static int (*bpf_perf_prog_read_value)(void *ctx, void *buf, unsigned int buf_size) = (void *) BPF_FUNC_perf_prog_read_value; - +static int (*bpf_override_return)(void *ctx, unsigned long rc) = + (void *) BPF_FUNC_override_return; /* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions -- 2.7.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-11-07 20:28 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik @ 2017-11-08 2:29 ` Daniel Borkmann 0 siblings, 0 replies; 12+ messages in thread From: Daniel Borkmann @ 2017-11-08 2:29 UTC (permalink / raw) To: Josef Bacik, rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team Cc: Josef Bacik On 11/07/2017 09:28 PM, Josef Bacik wrote: > From: Josef Bacik <jbacik@fb.com> > > This adds a basic test for bpf_override_return to verify it works. We > override the main function for mounting a btrfs fs so it'll return > -ENOMEM and then make sure that trying to mount a btrfs fs will fail. > > Acked-by: Alexei Starovoitov <ast@kernel.org> > Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 0/2][v4] Add the ability to do BPF directed error injection @ 2017-11-02 14:37 Josef Bacik 2017-11-02 14:37 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 0 siblings, 1 reply; 12+ messages in thread From: Josef Bacik @ 2017-11-02 14:37 UTC (permalink / raw) To: rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team, daniel I'm sending this through Dave since it'll conflict with other BPF changes in his tree, but since it touches tracing as well Dave would like a review from somebody on the tracing side. v3->v4: - fix a build error found by kbuild test bot (I didn't wait long enough apparently.) - Added a warning message as per Daniels suggestion. v2->v3: - added a ->kprobe_override flag to bpf_prog. - added some sanity checks to disallow attaching bpf progs that have ->kprobe_override set that aren't for ftrace kprobes. - added the trace_kprobe_ftrace helper to check if the trace_event_call is a ftrace kprobe. - renamed bpf_kprobe_state to bpf_kprobe_override, fixed it so we only read this value in the kprobe path, and thus only write to it if we're overriding or clearing the override. v1->v2: - moved things around to make sure that bpf_override_return could really only be used for an ftrace kprobe. - killed the special return values from trace_call_bpf. - renamed pc_modified to bpf_kprobe_state so bpf_override_return could tell if it was being called from an ftrace kprobe context. - reworked the logic in kprobe_perf_func to take advantage of bpf_kprobe_state. - updated the test as per Alexei's review. - Original message - A lot of our error paths are not well tested because we have no good way of injecting errors generically. Some subystems (block, memory) have ways to inject errors, but they are random so it's hard to get reproduceable results. With BPF we can add determinism to our error injection. We can use kprobes and other things to verify we are injecting errors at the exact case we are trying to test. This patch gives us the tool to actual do the error injection part. It is very simple, we just set the return value of the pt_regs we're given to whatever we provide, and then override the PC with a dummy function that simply returns. Right now this only works on x86, but it would be simple enough to expand to other architectures. Thanks, Josef ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-11-02 14:37 [PATCH 0/2][v4] Add the ability to do BPF directed error injection Josef Bacik @ 2017-11-02 14:37 ` Josef Bacik 0 siblings, 0 replies; 12+ messages in thread From: Josef Bacik @ 2017-11-02 14:37 UTC (permalink / raw) To: rostedt, mingo, davem, netdev, linux-kernel, ast, kernel-team, daniel Cc: Josef Bacik From: Josef Bacik <jbacik@fb.com> This adds a basic test for bpf_override_return to verify it works. We override the main function for mounting a btrfs fs so it'll return -ENOMEM and then make sure that trying to mount a btrfs fs will fail. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Josef Bacik <jbacik@fb.com> --- samples/bpf/Makefile | 4 ++++ samples/bpf/test_override_return.sh | 15 +++++++++++++++ samples/bpf/tracex7_kern.c | 16 ++++++++++++++++ samples/bpf/tracex7_user.c | 28 ++++++++++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 7 ++++++- tools/testing/selftests/bpf/bpf_helpers.h | 3 ++- 6 files changed, 71 insertions(+), 2 deletions(-) create mode 100755 samples/bpf/test_override_return.sh create mode 100644 samples/bpf/tracex7_kern.c create mode 100644 samples/bpf/tracex7_user.c diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index ea2b9e6135f3..83d06bc1f710 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -14,6 +14,7 @@ hostprogs-y += tracex3 hostprogs-y += tracex4 hostprogs-y += tracex5 hostprogs-y += tracex6 +hostprogs-y += tracex7 hostprogs-y += test_probe_write_user hostprogs-y += trace_output hostprogs-y += lathist @@ -58,6 +59,7 @@ tracex3-objs := bpf_load.o $(LIBBPF) tracex3_user.o tracex4-objs := bpf_load.o $(LIBBPF) tracex4_user.o tracex5-objs := bpf_load.o $(LIBBPF) tracex5_user.o tracex6-objs := bpf_load.o $(LIBBPF) tracex6_user.o +tracex7-objs := bpf_load.o $(LIBBPF) tracex7_user.o load_sock_ops-objs := bpf_load.o $(LIBBPF) load_sock_ops.o test_probe_write_user-objs := bpf_load.o $(LIBBPF) test_probe_write_user_user.o trace_output-objs := bpf_load.o $(LIBBPF) trace_output_user.o @@ -100,6 +102,7 @@ always += tracex3_kern.o always += tracex4_kern.o always += tracex5_kern.o always += tracex6_kern.o +always += tracex7_kern.o always += sock_flags_kern.o always += test_probe_write_user_kern.o always += trace_output_kern.o @@ -153,6 +156,7 @@ HOSTLOADLIBES_tracex3 += -lelf HOSTLOADLIBES_tracex4 += -lelf -lrt HOSTLOADLIBES_tracex5 += -lelf HOSTLOADLIBES_tracex6 += -lelf +HOSTLOADLIBES_tracex7 += -lelf HOSTLOADLIBES_test_cgrp2_sock2 += -lelf HOSTLOADLIBES_load_sock_ops += -lelf HOSTLOADLIBES_test_probe_write_user += -lelf diff --git a/samples/bpf/test_override_return.sh b/samples/bpf/test_override_return.sh new file mode 100755 index 000000000000..e68b9ee6814b --- /dev/null +++ b/samples/bpf/test_override_return.sh @@ -0,0 +1,15 @@ +#!/bin/bash + +rm -f testfile.img +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 +DEVICE=$(losetup --show -f testfile.img) +mkfs.btrfs -f $DEVICE +mkdir tmpmnt +./tracex7 $DEVICE +if [ $? -eq 0 ] +then + echo "SUCCESS!" +else + echo "FAILED!" +fi +losetup -d $DEVICE diff --git a/samples/bpf/tracex7_kern.c b/samples/bpf/tracex7_kern.c new file mode 100644 index 000000000000..1ab308a43e0f --- /dev/null +++ b/samples/bpf/tracex7_kern.c @@ -0,0 +1,16 @@ +#include <uapi/linux/ptrace.h> +#include <uapi/linux/bpf.h> +#include <linux/version.h> +#include "bpf_helpers.h" + +SEC("kprobe/open_ctree") +int bpf_prog1(struct pt_regs *ctx) +{ + unsigned long rc = -12; + + bpf_override_return(ctx, rc); + return 0; +} + +char _license[] SEC("license") = "GPL"; +u32 _version SEC("version") = LINUX_VERSION_CODE; diff --git a/samples/bpf/tracex7_user.c b/samples/bpf/tracex7_user.c new file mode 100644 index 000000000000..8a52ac492e8b --- /dev/null +++ b/samples/bpf/tracex7_user.c @@ -0,0 +1,28 @@ +#define _GNU_SOURCE + +#include <stdio.h> +#include <linux/bpf.h> +#include <unistd.h> +#include "libbpf.h" +#include "bpf_load.h" + +int main(int argc, char **argv) +{ + FILE *f; + char filename[256]; + char command[256]; + int ret; + + snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]); + + if (load_bpf_file(filename)) { + printf("%s", bpf_log_buf); + return 1; + } + + snprintf(command, 256, "mount %s tmpmnt/", argv[1]); + f = popen(command, "r"); + ret = pclose(f); + + return ret ? 0 : 1; +} diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 4a4b6e78c977..3756dde69834 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -673,6 +673,10 @@ union bpf_attr { * @buf: buf to fill * @buf_size: size of the buf * Return : 0 on success or negative error code + * + * int bpf_override_return(pt_regs, rc) + * @pt_regs: pointer to struct pt_regs + * @rc: the return value to set */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -732,7 +736,8 @@ union bpf_attr { FN(xdp_adjust_meta), \ FN(perf_event_read_value), \ FN(perf_prog_read_value), \ - FN(getsockopt), + FN(getsockopt), \ + FN(override_return), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index abfa4c5c8527..086733298d5e 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -81,7 +81,8 @@ static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags, static int (*bpf_perf_prog_read_value)(void *ctx, void *buf, unsigned int buf_size) = (void *) BPF_FUNC_perf_prog_read_value; - +static int (*bpf_override_return)(void *ctx, unsigned long rc) = + (void *) BPF_FUNC_override_return; /* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions -- 2.7.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 0/2][v2] Add the ability to do BPF directed error injection @ 2017-10-31 15:45 Josef Bacik 2017-10-31 15:45 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 0 siblings, 1 reply; 12+ messages in thread From: Josef Bacik @ 2017-10-31 15:45 UTC (permalink / raw) To: davem, netdev, linux-kernel, ast, kernel-team v1->v2: - moved things around to make sure that bpf_override_return could really only be used for an ftrace kprobe. - killed the special return values from trace_call_bpf. - renamed pc_modified to bpf_kprobe_state so bpf_override_return could tell if it was being called from an ftrace kprobe context. - reworked the logic in kprobe_perf_func to take advantage of bpf_kprobe_state. - updated the test as per Alexei's review. A lot of our error paths are not well tested because we have no good way of injecting errors generically. Some subystems (block, memory) have ways to inject errors, but they are random so it's hard to get reproduceable results. With BPF we can add determinism to our error injection. We can use kprobes and other things to verify we are injecting errors at the exact case we are trying to test. This patch gives us the tool to actual do the error injection part. It is very simple, we just set the return value of the pt_regs we're given to whatever we provide, and then override the PC with a dummy function that simply returns. Right now this only works on x86, but it would be simple enough to expand to other architectures. Thanks, Josef ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-10-31 15:45 [PATCH 0/2][v2] Add the ability to do BPF directed error injection Josef Bacik @ 2017-10-31 15:45 ` Josef Bacik 0 siblings, 0 replies; 12+ messages in thread From: Josef Bacik @ 2017-10-31 15:45 UTC (permalink / raw) To: davem, netdev, linux-kernel, ast, kernel-team; +Cc: Josef Bacik From: Josef Bacik <jbacik@fb.com> This adds a basic test for bpf_override_return to verify it works. We override the main function for mounting a btrfs fs so it'll return -ENOMEM and then make sure that trying to mount a btrfs fs will fail. Signed-off-by: Josef Bacik <jbacik@fb.com> --- samples/bpf/Makefile | 4 ++++ samples/bpf/test_override_return.sh | 15 +++++++++++++++ samples/bpf/tracex7_kern.c | 16 ++++++++++++++++ samples/bpf/tracex7_user.c | 28 ++++++++++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 7 ++++++- tools/testing/selftests/bpf/bpf_helpers.h | 3 ++- 6 files changed, 71 insertions(+), 2 deletions(-) create mode 100755 samples/bpf/test_override_return.sh create mode 100644 samples/bpf/tracex7_kern.c create mode 100644 samples/bpf/tracex7_user.c diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index ea2b9e6135f3..83d06bc1f710 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -14,6 +14,7 @@ hostprogs-y += tracex3 hostprogs-y += tracex4 hostprogs-y += tracex5 hostprogs-y += tracex6 +hostprogs-y += tracex7 hostprogs-y += test_probe_write_user hostprogs-y += trace_output hostprogs-y += lathist @@ -58,6 +59,7 @@ tracex3-objs := bpf_load.o $(LIBBPF) tracex3_user.o tracex4-objs := bpf_load.o $(LIBBPF) tracex4_user.o tracex5-objs := bpf_load.o $(LIBBPF) tracex5_user.o tracex6-objs := bpf_load.o $(LIBBPF) tracex6_user.o +tracex7-objs := bpf_load.o $(LIBBPF) tracex7_user.o load_sock_ops-objs := bpf_load.o $(LIBBPF) load_sock_ops.o test_probe_write_user-objs := bpf_load.o $(LIBBPF) test_probe_write_user_user.o trace_output-objs := bpf_load.o $(LIBBPF) trace_output_user.o @@ -100,6 +102,7 @@ always += tracex3_kern.o always += tracex4_kern.o always += tracex5_kern.o always += tracex6_kern.o +always += tracex7_kern.o always += sock_flags_kern.o always += test_probe_write_user_kern.o always += trace_output_kern.o @@ -153,6 +156,7 @@ HOSTLOADLIBES_tracex3 += -lelf HOSTLOADLIBES_tracex4 += -lelf -lrt HOSTLOADLIBES_tracex5 += -lelf HOSTLOADLIBES_tracex6 += -lelf +HOSTLOADLIBES_tracex7 += -lelf HOSTLOADLIBES_test_cgrp2_sock2 += -lelf HOSTLOADLIBES_load_sock_ops += -lelf HOSTLOADLIBES_test_probe_write_user += -lelf diff --git a/samples/bpf/test_override_return.sh b/samples/bpf/test_override_return.sh new file mode 100755 index 000000000000..e68b9ee6814b --- /dev/null +++ b/samples/bpf/test_override_return.sh @@ -0,0 +1,15 @@ +#!/bin/bash + +rm -f testfile.img +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 +DEVICE=$(losetup --show -f testfile.img) +mkfs.btrfs -f $DEVICE +mkdir tmpmnt +./tracex7 $DEVICE +if [ $? -eq 0 ] +then + echo "SUCCESS!" +else + echo "FAILED!" +fi +losetup -d $DEVICE diff --git a/samples/bpf/tracex7_kern.c b/samples/bpf/tracex7_kern.c new file mode 100644 index 000000000000..1ab308a43e0f --- /dev/null +++ b/samples/bpf/tracex7_kern.c @@ -0,0 +1,16 @@ +#include <uapi/linux/ptrace.h> +#include <uapi/linux/bpf.h> +#include <linux/version.h> +#include "bpf_helpers.h" + +SEC("kprobe/open_ctree") +int bpf_prog1(struct pt_regs *ctx) +{ + unsigned long rc = -12; + + bpf_override_return(ctx, rc); + return 0; +} + +char _license[] SEC("license") = "GPL"; +u32 _version SEC("version") = LINUX_VERSION_CODE; diff --git a/samples/bpf/tracex7_user.c b/samples/bpf/tracex7_user.c new file mode 100644 index 000000000000..8a52ac492e8b --- /dev/null +++ b/samples/bpf/tracex7_user.c @@ -0,0 +1,28 @@ +#define _GNU_SOURCE + +#include <stdio.h> +#include <linux/bpf.h> +#include <unistd.h> +#include "libbpf.h" +#include "bpf_load.h" + +int main(int argc, char **argv) +{ + FILE *f; + char filename[256]; + char command[256]; + int ret; + + snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]); + + if (load_bpf_file(filename)) { + printf("%s", bpf_log_buf); + return 1; + } + + snprintf(command, 256, "mount %s tmpmnt/", argv[1]); + f = popen(command, "r"); + ret = pclose(f); + + return ret ? 0 : 1; +} diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 4a4b6e78c977..3756dde69834 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -673,6 +673,10 @@ union bpf_attr { * @buf: buf to fill * @buf_size: size of the buf * Return : 0 on success or negative error code + * + * int bpf_override_return(pt_regs, rc) + * @pt_regs: pointer to struct pt_regs + * @rc: the return value to set */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -732,7 +736,8 @@ union bpf_attr { FN(xdp_adjust_meta), \ FN(perf_event_read_value), \ FN(perf_prog_read_value), \ - FN(getsockopt), + FN(getsockopt), \ + FN(override_return), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index abfa4c5c8527..086733298d5e 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -81,7 +81,8 @@ static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags, static int (*bpf_perf_prog_read_value)(void *ctx, void *buf, unsigned int buf_size) = (void *) BPF_FUNC_perf_prog_read_value; - +static int (*bpf_override_return)(void *ctx, unsigned long rc) = + (void *) BPF_FUNC_override_return; /* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions -- 2.7.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 0/2] Add the ability to do BPF directed error injection @ 2017-10-30 21:19 Josef Bacik 2017-10-30 21:19 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 0 siblings, 1 reply; 12+ messages in thread From: Josef Bacik @ 2017-10-30 21:19 UTC (permalink / raw) To: davem, netdev, linux-kernel, ast, kernel-team A lot of our error paths are not well tested because we have no good way of injecting errors generically. Some subystems (block, memory) have ways to inject errors, but they are random so it's hard to get reproduceable results. With BPF we can add determinism to our error injection. We can use kprobes and other things to verify we are injecting errors at the exact case we are trying to test. This patch gives us the tool to actual do the error injection part. It is very simple, we just set the return value of the pt_regs we're given to whatever we provide, and then override the PC with a dummy function that simply returns. Right now this only works on x86, but it would be simple enough to expand to other architectures. Thanks, Josef ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-10-30 21:19 [PATCH 0/2] Add the ability to do BPF directed error injection Josef Bacik @ 2017-10-30 21:19 ` Josef Bacik 2017-10-31 1:37 ` Alexei Starovoitov 0 siblings, 1 reply; 12+ messages in thread From: Josef Bacik @ 2017-10-30 21:19 UTC (permalink / raw) To: davem, netdev, linux-kernel, ast, kernel-team; +Cc: Josef Bacik From: Josef Bacik <jbacik@fb.com> This adds a basic test for bpf_override_return to verify it works. We override the main function for mounting a btrfs fs so it'll return -ENOMEM and then make sure that trying to mount a btrfs fs will fail. Signed-off-by: Josef Bacik <jbacik@fb.com> --- samples/bpf/Makefile | 4 ++++ samples/bpf/test_override_return.sh | 15 +++++++++++++++ samples/bpf/tracex7_kern.c | 15 +++++++++++++++ samples/bpf/tracex7_user.c | 28 ++++++++++++++++++++++++++++ tools/include/uapi/linux/bpf.h | 7 ++++++- tools/testing/selftests/bpf/bpf_helpers.h | 3 ++- 6 files changed, 70 insertions(+), 2 deletions(-) create mode 100755 samples/bpf/test_override_return.sh create mode 100644 samples/bpf/tracex7_kern.c create mode 100644 samples/bpf/tracex7_user.c diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index ea2b9e6135f3..83d06bc1f710 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -14,6 +14,7 @@ hostprogs-y += tracex3 hostprogs-y += tracex4 hostprogs-y += tracex5 hostprogs-y += tracex6 +hostprogs-y += tracex7 hostprogs-y += test_probe_write_user hostprogs-y += trace_output hostprogs-y += lathist @@ -58,6 +59,7 @@ tracex3-objs := bpf_load.o $(LIBBPF) tracex3_user.o tracex4-objs := bpf_load.o $(LIBBPF) tracex4_user.o tracex5-objs := bpf_load.o $(LIBBPF) tracex5_user.o tracex6-objs := bpf_load.o $(LIBBPF) tracex6_user.o +tracex7-objs := bpf_load.o $(LIBBPF) tracex7_user.o load_sock_ops-objs := bpf_load.o $(LIBBPF) load_sock_ops.o test_probe_write_user-objs := bpf_load.o $(LIBBPF) test_probe_write_user_user.o trace_output-objs := bpf_load.o $(LIBBPF) trace_output_user.o @@ -100,6 +102,7 @@ always += tracex3_kern.o always += tracex4_kern.o always += tracex5_kern.o always += tracex6_kern.o +always += tracex7_kern.o always += sock_flags_kern.o always += test_probe_write_user_kern.o always += trace_output_kern.o @@ -153,6 +156,7 @@ HOSTLOADLIBES_tracex3 += -lelf HOSTLOADLIBES_tracex4 += -lelf -lrt HOSTLOADLIBES_tracex5 += -lelf HOSTLOADLIBES_tracex6 += -lelf +HOSTLOADLIBES_tracex7 += -lelf HOSTLOADLIBES_test_cgrp2_sock2 += -lelf HOSTLOADLIBES_load_sock_ops += -lelf HOSTLOADLIBES_test_probe_write_user += -lelf diff --git a/samples/bpf/test_override_return.sh b/samples/bpf/test_override_return.sh new file mode 100755 index 000000000000..e68b9ee6814b --- /dev/null +++ b/samples/bpf/test_override_return.sh @@ -0,0 +1,15 @@ +#!/bin/bash + +rm -f testfile.img +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 +DEVICE=$(losetup --show -f testfile.img) +mkfs.btrfs -f $DEVICE +mkdir tmpmnt +./tracex7 $DEVICE +if [ $? -eq 0 ] +then + echo "SUCCESS!" +else + echo "FAILED!" +fi +losetup -d $DEVICE diff --git a/samples/bpf/tracex7_kern.c b/samples/bpf/tracex7_kern.c new file mode 100644 index 000000000000..a2f74f736e66 --- /dev/null +++ b/samples/bpf/tracex7_kern.c @@ -0,0 +1,15 @@ +#include <uapi/linux/ptrace.h> +#include <uapi/linux/bpf.h> +#include <linux/version.h> +#include "bpf_helpers.h" + +SEC("kprobe/open_ctree") +int bpf_prog1(struct pt_regs *ctx) +{ + unsigned long rc = -12; + bpf_override_return(ctx, rc); + return 0; +} + +char _license[] SEC("license") = "GPL"; +u32 _version SEC("version") = LINUX_VERSION_CODE; diff --git a/samples/bpf/tracex7_user.c b/samples/bpf/tracex7_user.c new file mode 100644 index 000000000000..8a52ac492e8b --- /dev/null +++ b/samples/bpf/tracex7_user.c @@ -0,0 +1,28 @@ +#define _GNU_SOURCE + +#include <stdio.h> +#include <linux/bpf.h> +#include <unistd.h> +#include "libbpf.h" +#include "bpf_load.h" + +int main(int argc, char **argv) +{ + FILE *f; + char filename[256]; + char command[256]; + int ret; + + snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]); + + if (load_bpf_file(filename)) { + printf("%s", bpf_log_buf); + return 1; + } + + snprintf(command, 256, "mount %s tmpmnt/", argv[1]); + f = popen(command, "r"); + ret = pclose(f); + + return ret ? 0 : 1; +} diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 4a4b6e78c977..3756dde69834 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -673,6 +673,10 @@ union bpf_attr { * @buf: buf to fill * @buf_size: size of the buf * Return : 0 on success or negative error code + * + * int bpf_override_return(pt_regs, rc) + * @pt_regs: pointer to struct pt_regs + * @rc: the return value to set */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -732,7 +736,8 @@ union bpf_attr { FN(xdp_adjust_meta), \ FN(perf_event_read_value), \ FN(perf_prog_read_value), \ - FN(getsockopt), + FN(getsockopt), \ + FN(override_return), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index abfa4c5c8527..086733298d5e 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -81,7 +81,8 @@ static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags, static int (*bpf_perf_prog_read_value)(void *ctx, void *buf, unsigned int buf_size) = (void *) BPF_FUNC_perf_prog_read_value; - +static int (*bpf_override_return)(void *ctx, unsigned long rc) = + (void *) BPF_FUNC_override_return; /* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions -- 2.7.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] samples/bpf: add a test for bpf_override_return 2017-10-30 21:19 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik @ 2017-10-31 1:37 ` Alexei Starovoitov 0 siblings, 0 replies; 12+ messages in thread From: Alexei Starovoitov @ 2017-10-31 1:37 UTC (permalink / raw) To: Josef Bacik, davem, netdev, linux-kernel, ast, kernel-team; +Cc: Josef Bacik On 10/30/17 2:19 PM, Josef Bacik wrote: > + > +rm -f testfile.img > +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 > +DEVICE=$(losetup --show -f testfile.img) > +mkfs.btrfs -f $DEVICE > +mkdir tmpmnt > +./tracex7 $DEVICE > +if [ $? -eq 0 ] > +then > + echo "SUCCESS!" > +else > + echo "FAILED!" > +fi > +losetup -d $DEVICE nice test! > diff --git a/samples/bpf/tracex7_kern.c b/samples/bpf/tracex7_kern.c > new file mode 100644 > index 000000000000..a2f74f736e66 > --- /dev/null > +++ b/samples/bpf/tracex7_kern.c > @@ -0,0 +1,15 @@ > +#include <uapi/linux/ptrace.h> > +#include <uapi/linux/bpf.h> > +#include <linux/version.h> > +#include "bpf_helpers.h" > + > +SEC("kprobe/open_ctree") > +int bpf_prog1(struct pt_regs *ctx) > +{ > + unsigned long rc = -12; pls add empty line here. > + bpf_override_return(ctx, rc); > + return 0; > +} ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-11-08 2:29 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-11-01 17:00 [PATCH 0/2][v3] Add the ability to do BPF directed error injection Josef Bacik 2017-11-01 17:00 ` [PATCH 1/2] bpf: add a bpf_override_function helper Josef Bacik 2017-11-01 17:18 ` Alexei Starovoitov 2017-11-02 1:08 ` Daniel Borkmann 2017-11-01 17:00 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 2017-11-01 17:23 ` Alexei Starovoitov -- strict thread matches above, loose matches on Subject: below -- 2017-11-07 20:28 [PATCH 0/2][v5] Add the ability to do BPF directed error injection Josef Bacik 2017-11-07 20:28 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 2017-11-08 2:29 ` Daniel Borkmann 2017-11-02 14:37 [PATCH 0/2][v4] Add the ability to do BPF directed error injection Josef Bacik 2017-11-02 14:37 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 2017-10-31 15:45 [PATCH 0/2][v2] Add the ability to do BPF directed error injection Josef Bacik 2017-10-31 15:45 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 2017-10-30 21:19 [PATCH 0/2] Add the ability to do BPF directed error injection Josef Bacik 2017-10-30 21:19 ` [PATCH 2/2] samples/bpf: add a test for bpf_override_return Josef Bacik 2017-10-31 1:37 ` Alexei Starovoitov
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.