[PATCH v2 00/13] ARM: davinci: remove duplicate aemif support

[PATCH v2 00/13] ARM: davinci: remove duplicate aemif support

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This series moves all aemif/nand users to using the ti-aemif platform
driver located in drivers/memory instead of the older API located in
mach-davinci.

First five patches add necessary changes to the clock driver. Next
seven convert the board files to using the ti-aemif driver. Last patch
removes now dead code.

v1 -> v2:
- added missing clock lookups for ti-aemif where needed
- removed an unnecessary davinci_nand clock lookup from psc-da850
- moved the .id field initialization of aemif platform devices next to .name
- tweaked the commit message for the last patch

Bartosz Golaszewski (13):
  clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup
  clk: davinci: psc-dm365: use two lookup entries for the aemif clock
  clk: davinci: psc-dm644x: use two lookup entries for the aemif clock
  clk: davinci: psc-dm646x: use two lookup entries for the aemif clock
  clk: davinci: psc-da830: add a lookup entry for aemif clock
  ARM: davinci: omapl138-hawk: add aemif & nand support
  ARM: davinci: da850-evm: use aemif platform driver in legacy mode
  ARM: davinci: dm365-evm: use the ti-aemif soc driver
  ARM: davinci: dm644x-evm: use aemif platform driver
  ARM: davinci: da830-evm: use aemif platform driver
  ARM: davinci: dm646x-evm: use aemif platform driver
  ARM: davinci: mityomapl138: use aemif platform driver
  ARM: davinci: unduplicate aemif support

 arch/arm/mach-davinci/Makefile                |   2 +-
 arch/arm/mach-davinci/aemif.c                 | 218 ------------------
 arch/arm/mach-davinci/board-da830-evm.c       |  56 ++++-
 arch/arm/mach-davinci/board-da850-evm.c       |  93 ++++----
 arch/arm/mach-davinci/board-dm365-evm.c       |  59 +++--
 arch/arm/mach-davinci/board-dm644x-evm.c      |  55 +++--
 arch/arm/mach-davinci/board-dm646x-evm.c      |  52 ++++-
 arch/arm/mach-davinci/board-mityomapl138.c    |  55 +++--
 arch/arm/mach-davinci/board-omapl138-hawk.c   | 132 +++++++++++
 drivers/clk/davinci/psc-da830.c               |   3 +-
 drivers/clk/davinci/psc-da850.c               |   3 +-
 drivers/clk/davinci/psc-dm365.c               |   3 +-
 drivers/clk/davinci/psc-dm644x.c              |   3 +-
 drivers/clk/davinci/psc-dm646x.c              |   3 +-
 .../linux/platform_data/mtd-davinci-aemif.h   |   1 -
 15 files changed, 407 insertions(+), 331 deletions(-)
 delete mode 100644 arch/arm/mach-davinci/aemif.c

-- 
2.17.1

[PATCH v2 00/13] ARM: davinci: remove duplicate aemif support

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This series moves all aemif/nand users to using the ti-aemif platform
driver located in drivers/memory instead of the older API located in
mach-davinci.

First five patches add necessary changes to the clock driver. Next
seven convert the board files to using the ti-aemif driver. Last patch
removes now dead code.

v1 -> v2:
- added missing clock lookups for ti-aemif where needed
- removed an unnecessary davinci_nand clock lookup from psc-da850
- moved the .id field initialization of aemif platform devices next to .name
- tweaked the commit message for the last patch

Bartosz Golaszewski (13):
  clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup
  clk: davinci: psc-dm365: use two lookup entries for the aemif clock
  clk: davinci: psc-dm644x: use two lookup entries for the aemif clock
  clk: davinci: psc-dm646x: use two lookup entries for the aemif clock
  clk: davinci: psc-da830: add a lookup entry for aemif clock
  ARM: davinci: omapl138-hawk: add aemif & nand support
  ARM: davinci: da850-evm: use aemif platform driver in legacy mode
  ARM: davinci: dm365-evm: use the ti-aemif soc driver
  ARM: davinci: dm644x-evm: use aemif platform driver
  ARM: davinci: da830-evm: use aemif platform driver
  ARM: davinci: dm646x-evm: use aemif platform driver
  ARM: davinci: mityomapl138: use aemif platform driver
  ARM: davinci: unduplicate aemif support

 arch/arm/mach-davinci/Makefile                |   2 +-
 arch/arm/mach-davinci/aemif.c                 | 218 ------------------
 arch/arm/mach-davinci/board-da830-evm.c       |  56 ++++-
 arch/arm/mach-davinci/board-da850-evm.c       |  93 ++++----
 arch/arm/mach-davinci/board-dm365-evm.c       |  59 +++--
 arch/arm/mach-davinci/board-dm644x-evm.c      |  55 +++--
 arch/arm/mach-davinci/board-dm646x-evm.c      |  52 ++++-
 arch/arm/mach-davinci/board-mityomapl138.c    |  55 +++--
 arch/arm/mach-davinci/board-omapl138-hawk.c   | 132 +++++++++++
 drivers/clk/davinci/psc-da830.c               |   3 +-
 drivers/clk/davinci/psc-da850.c               |   3 +-
 drivers/clk/davinci/psc-dm365.c               |   3 +-
 drivers/clk/davinci/psc-dm644x.c              |   3 +-
 drivers/clk/davinci/psc-dm646x.c              |   3 +-
 .../linux/platform_data/mtd-davinci-aemif.h   |   1 -
 15 files changed, 407 insertions(+), 331 deletions(-)
 delete mode 100644 arch/arm/mach-davinci/aemif.c

-- 
2.17.1

[PATCH v2 01/13] clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Since commit a8e3923ab571 ("mtd: rawnand: davinci: don't acquire and
enable clock") we no longer acquire the aemif clock from the davinci
nand driver - we only do it from the ti-aemif driver. Remove the nand
entry from the psc lookup table.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-da850.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c
index d196dcbed560..5a18bca464cd 100644
--- a/drivers/clk/davinci/psc-da850.c
+++ b/drivers/clk/davinci/psc-da850.c
@@ -16,8 +16,7 @@
 
 #include "psc.h"
 
-LPSC_CLKDEV2(emifa_clkdev,	NULL,		"ti-aemif",
-				"aemif",	"davinci_nand.0");
+LPSC_CLKDEV1(emifa_clkdev,	NULL,		"ti-aemif");
 LPSC_CLKDEV1(spi0_clkdev,	NULL,		"spi_davinci.0");
 LPSC_CLKDEV1(mmcsd0_clkdev,	NULL,		"da830-mmc.0");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,		"serial8250.0");
-- 
2.17.1

[PATCH v2 01/13] clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Since commit a8e3923ab571 ("mtd: rawnand: davinci: don't acquire and
enable clock") we no longer acquire the aemif clock from the davinci
nand driver - we only do it from the ti-aemif driver. Remove the nand
entry from the psc lookup table.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-da850.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c
index d196dcbed560..5a18bca464cd 100644
--- a/drivers/clk/davinci/psc-da850.c
+++ b/drivers/clk/davinci/psc-da850.c
@@ -16,8 +16,7 @@
 
 #include "psc.h"
 
-LPSC_CLKDEV2(emifa_clkdev,	NULL,		"ti-aemif",
-				"aemif",	"davinci_nand.0");
+LPSC_CLKDEV1(emifa_clkdev,	NULL,		"ti-aemif");
 LPSC_CLKDEV1(spi0_clkdev,	NULL,		"spi_davinci.0");
 LPSC_CLKDEV1(mmcsd0_clkdev,	NULL,		"da830-mmc.0");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,		"serial8250.0");
-- 
2.17.1

Re: [PATCH v2 01/13] clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Since commit a8e3923ab571 ("mtd: rawnand: davinci: don't acquire and
> enable clock") we no longer acquire the aemif clock from the davinci
> nand driver - we only do it from the ti-aemif driver. Remove the nand
> entry from the psc lookup table.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 01/13] clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Since commit a8e3923ab571 ("mtd: rawnand: davinci: don't acquire and
> enable clock") we no longer acquire the aemif clock from the davinci
> nand driver - we only do it from the ti-aemif driver. Remove the nand
> entry from the psc lookup table.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 02/13] clk: davinci: psc-dm365: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to be able to get the clock both from the board file by its
con_id and from the aemif driver by dev_id.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-dm365.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-dm365.c b/drivers/clk/davinci/psc-dm365.c
index 8c73086cc676..c75424f4ea3b 100644
--- a/drivers/clk/davinci/psc-dm365.c
+++ b/drivers/clk/davinci/psc-dm365.c
@@ -21,7 +21,8 @@ LPSC_CLKDEV1(mmcsd1_clkdev,		NULL,		"da830-mmc.1");
 LPSC_CLKDEV1(asp0_clkdev,		NULL,		"davinci-mcbsp");
 LPSC_CLKDEV1(usb_clkdev,		"usb",		NULL);
 LPSC_CLKDEV1(spi2_clkdev,		NULL,		"spi_davinci.2");
-LPSC_CLKDEV1(aemif_clkdev,		"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,		"aemif",	NULL,
+					NULL,		"ti-aemif");
 LPSC_CLKDEV1(mmcsd0_clkdev,		NULL,		"da830-mmc.0");
 LPSC_CLKDEV1(i2c_clkdev,		NULL,		"i2c_davinci.1");
 LPSC_CLKDEV1(uart0_clkdev,		NULL,		"serial8250.0");
-- 
2.17.1

[PATCH v2 02/13] clk: davinci: psc-dm365: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to be able to get the clock both from the board file by its
con_id and from the aemif driver by dev_id.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-dm365.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-dm365.c b/drivers/clk/davinci/psc-dm365.c
index 8c73086cc676..c75424f4ea3b 100644
--- a/drivers/clk/davinci/psc-dm365.c
+++ b/drivers/clk/davinci/psc-dm365.c
@@ -21,7 +21,8 @@ LPSC_CLKDEV1(mmcsd1_clkdev,		NULL,		"da830-mmc.1");
 LPSC_CLKDEV1(asp0_clkdev,		NULL,		"davinci-mcbsp");
 LPSC_CLKDEV1(usb_clkdev,		"usb",		NULL);
 LPSC_CLKDEV1(spi2_clkdev,		NULL,		"spi_davinci.2");
-LPSC_CLKDEV1(aemif_clkdev,		"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,		"aemif",	NULL,
+					NULL,		"ti-aemif");
 LPSC_CLKDEV1(mmcsd0_clkdev,		NULL,		"da830-mmc.0");
 LPSC_CLKDEV1(i2c_clkdev,		NULL,		"i2c_davinci.1");
 LPSC_CLKDEV1(uart0_clkdev,		NULL,		"serial8250.0");
-- 
2.17.1

Re: [PATCH v2 02/13] clk: davinci: psc-dm365: use two lookup entries for the aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 02/13] clk: davinci: psc-dm365: use two lookup entries for the aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 03/13] clk: davinci: psc-dm644x: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to be able to get the clock both from the board file by its
con_id and from the aemif driver by dev_id.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-dm644x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-dm644x.c b/drivers/clk/davinci/psc-dm644x.c
index fc0230e3a3d6..0cea6e0bd5f0 100644
--- a/drivers/clk/davinci/psc-dm644x.c
+++ b/drivers/clk/davinci/psc-dm644x.c
@@ -21,7 +21,8 @@ LPSC_CLKDEV2(emac_clkdev,		NULL,		"davinci_emac.1",
 					"fck",		"davinci_mdio.0");
 LPSC_CLKDEV1(usb_clkdev,		"usb",		NULL);
 LPSC_CLKDEV1(ide_clkdev,		NULL,		"palm_bk3710");
-LPSC_CLKDEV1(aemif_clkdev,		"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,		"aemif",	NULL,
+					NULL,		"ti-aemif");
 LPSC_CLKDEV1(mmcsd_clkdev,		NULL,		"dm6441-mmc.0");
 LPSC_CLKDEV1(asp0_clkdev,		NULL,		"davinci-mcbsp");
 LPSC_CLKDEV1(i2c_clkdev,		NULL,		"i2c_davinci.1");
-- 
2.17.1

[PATCH v2 03/13] clk: davinci: psc-dm644x: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to be able to get the clock both from the board file by its
con_id and from the aemif driver by dev_id.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-dm644x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-dm644x.c b/drivers/clk/davinci/psc-dm644x.c
index fc0230e3a3d6..0cea6e0bd5f0 100644
--- a/drivers/clk/davinci/psc-dm644x.c
+++ b/drivers/clk/davinci/psc-dm644x.c
@@ -21,7 +21,8 @@ LPSC_CLKDEV2(emac_clkdev,		NULL,		"davinci_emac.1",
 					"fck",		"davinci_mdio.0");
 LPSC_CLKDEV1(usb_clkdev,		"usb",		NULL);
 LPSC_CLKDEV1(ide_clkdev,		NULL,		"palm_bk3710");
-LPSC_CLKDEV1(aemif_clkdev,		"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,		"aemif",	NULL,
+					NULL,		"ti-aemif");
 LPSC_CLKDEV1(mmcsd_clkdev,		NULL,		"dm6441-mmc.0");
 LPSC_CLKDEV1(asp0_clkdev,		NULL,		"davinci-mcbsp");
 LPSC_CLKDEV1(i2c_clkdev,		NULL,		"i2c_davinci.1");
-- 
2.17.1

Re: [PATCH v2 03/13] clk: davinci: psc-dm644x: use two lookup entries for the aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 03/13] clk: davinci: psc-dm644x: use two lookup entries for the aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to be able to get the clock both from the board file by its
con_id and from the aemif driver by dev_id.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-dm646x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-dm646x.c b/drivers/clk/davinci/psc-dm646x.c
index c3f82ed70a80..20012dc7471a 100644
--- a/drivers/clk/davinci/psc-dm646x.c
+++ b/drivers/clk/davinci/psc-dm646x.c
@@ -18,7 +18,8 @@
 LPSC_CLKDEV1(ide_clkdev,	NULL,		"palm_bk3710");
 LPSC_CLKDEV2(emac_clkdev,	NULL,		"davinci_emac.1",
 				"fck",		"davinci_mdio.0");
-LPSC_CLKDEV1(aemif_clkdev,	"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,	"aemif",	NULL,
+				NULL,		"ti-aemif");
 LPSC_CLKDEV1(mcasp0_clkdev,	NULL,		"davinci-mcasp.0");
 LPSC_CLKDEV1(mcasp1_clkdev,	NULL,		"davinci-mcasp.1");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,		"serial8250.0");
-- 
2.17.1

[PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to be able to get the clock both from the board file by its
con_id and from the aemif driver by dev_id.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-dm646x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-dm646x.c b/drivers/clk/davinci/psc-dm646x.c
index c3f82ed70a80..20012dc7471a 100644
--- a/drivers/clk/davinci/psc-dm646x.c
+++ b/drivers/clk/davinci/psc-dm646x.c
@@ -18,7 +18,8 @@
 LPSC_CLKDEV1(ide_clkdev,	NULL,		"palm_bk3710");
 LPSC_CLKDEV2(emac_clkdev,	NULL,		"davinci_emac.1",
 				"fck",		"davinci_mdio.0");
-LPSC_CLKDEV1(aemif_clkdev,	"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,	"aemif",	NULL,
+				NULL,		"ti-aemif");
 LPSC_CLKDEV1(mcasp0_clkdev,	NULL,		"davinci-mcasp.0");
 LPSC_CLKDEV1(mcasp1_clkdev,	NULL,		"davinci-mcasp.1");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,		"serial8250.0");
-- 
2.17.1

Re: [PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

Re: [PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Sekhar Nori]

On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

I see the DM365 and DM644x EVM board files getting reference to aemif
clock using just the con_id, but don't see that for DM646x. Am I
overlooking something?

Thanks,
Sekhar

[PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Sekhar Nori]

On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to be able to get the clock both from the board file by its
> con_id and from the aemif driver by dev_id.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

I see the DM365 and DM644x EVM board files getting reference to aemif
clock using just the con_id, but don't see that for DM646x. Am I
overlooking something?

Thanks,
Sekhar

Re: [PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

2018-06-27 12:01 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
> On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>
>> We want to be able to get the clock both from the board file by its
>> con_id and from the aemif driver by dev_id.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> I see the DM365 and DM644x EVM board files getting reference to aemif
> clock using just the con_id, but don't see that for DM646x. Am I
> overlooking something?
>
> Thanks,
> Sekhar

It's being done indirectly from mach-davinci/aemif.c. I guess we can
remove it again after last patch.

Bart

[PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Bartosz Golaszewski]

2018-06-27 12:01 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
> On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>
>> We want to be able to get the clock both from the board file by its
>> con_id and from the aemif driver by dev_id.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> I see the DM365 and DM644x EVM board files getting reference to aemif
> clock using just the con_id, but don't see that for DM646x. Am I
> overlooking something?
>
> Thanks,
> Sekhar

It's being done indirectly from mach-davinci/aemif.c. I guess we can
remove it again after last patch.

Bart

Re: [PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Sekhar Nori]

On Wednesday 27 June 2018 03:33 PM, Bartosz Golaszewski wrote:
> 2018-06-27 12:01 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
>> On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>
>>> We want to be able to get the clock both from the board file by its
>>> con_id and from the aemif driver by dev_id.
>>>
>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>
>> I see the DM365 and DM644x EVM board files getting reference to aemif
>> clock using just the con_id, but don't see that for DM646x. Am I
>> overlooking something?
>>
>> Thanks,
>> Sekhar
> 
> It's being done indirectly from mach-davinci/aemif.c. I guess we can
> remove it again after last patch.

I see. One way to avoid that would be to merge this into 11/13. I prefer
that, but it prevents clean separation of clock and machine patches. So
okay with current way too.

Thanks,
Sekhar

[PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[Sekhar Nori]

On Wednesday 27 June 2018 03:33 PM, Bartosz Golaszewski wrote:
> 2018-06-27 12:01 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
>> On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>
>>> We want to be able to get the clock both from the board file by its
>>> con_id and from the aemif driver by dev_id.
>>>
>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>
>> I see the DM365 and DM644x EVM board files getting reference to aemif
>> clock using just the con_id, but don't see that for DM646x. Am I
>> overlooking something?
>>
>> Thanks,
>> Sekhar
> 
> It's being done indirectly from mach-davinci/aemif.c. I guess we can
> remove it again after last patch.

I see. One way to avoid that would be to merge this into 11/13. I prefer
that, but it prevents clean separation of clock and machine patches. So
okay with current way too.

Thanks,
Sekhar

Re: [PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[David Lechner]

On 06/27/2018 05:26 AM, Sekhar Nori wrote:
> On Wednesday 27 June 2018 03:33 PM, Bartosz Golaszewski wrote:
>> 2018-06-27 12:01 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
>>> On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>>>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>>
>>>> We want to be able to get the clock both from the board file by its
>>>> con_id and from the aemif driver by dev_id.
>>>>
>>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>
>>> I see the DM365 and DM644x EVM board files getting reference to aemif
>>> clock using just the con_id, but don't see that for DM646x. Am I
>>> overlooking something?
>>>
>>> Thanks,
>>> Sekhar
>>
>> It's being done indirectly from mach-davinci/aemif.c. I guess we can
>> remove it again after last patch.
> 
> I see. One way to avoid that would be to merge this into 11/13. I prefer
> that, but it prevents clean separation of clock and machine patches. So
> okay with current way too.

I think da850 has a con_id-only lookup that can be removed as well. I'm
in favor of doing another series to clean these up later.

[PATCH v2 04/13] clk: davinci: psc-dm646x: use two lookup entries for the aemif clock

[David Lechner]

On 06/27/2018 05:26 AM, Sekhar Nori wrote:
> On Wednesday 27 June 2018 03:33 PM, Bartosz Golaszewski wrote:
>> 2018-06-27 12:01 GMT+02:00 Sekhar Nori <nsekhar@ti.com>:
>>> On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>>>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>>
>>>> We want to be able to get the clock both from the board file by its
>>>> con_id and from the aemif driver by dev_id.
>>>>
>>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>
>>> I see the DM365 and DM644x EVM board files getting reference to aemif
>>> clock using just the con_id, but don't see that for DM646x. Am I
>>> overlooking something?
>>>
>>> Thanks,
>>> Sekhar
>>
>> It's being done indirectly from mach-davinci/aemif.c. I guess we can
>> remove it again after last patch.
> 
> I see. One way to avoid that would be to merge this into 11/13. I prefer
> that, but it prevents clean separation of clock and machine patches. So
> okay with current way too.

I think da850 has a con_id-only lookup that can be removed as well. I'm
in favor of doing another series to clean these up later.

[PATCH v2 05/13] clk: davinci: psc-da830: add a lookup entry for aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to use the ti-aemif platform driver for da830-evm. To make it
work we need a lookup entry for the aemif clock.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-da830.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-da830.c b/drivers/clk/davinci/psc-da830.c
index 081b039fcb02..6481337382a6 100644
--- a/drivers/clk/davinci/psc-da830.c
+++ b/drivers/clk/davinci/psc-da830.c
@@ -14,6 +14,7 @@
 
 #include "psc.h"
 
+LPSC_CLKDEV1(aemif_clkdev,	NULL,	"ti-aemif");
 LPSC_CLKDEV1(spi0_clkdev,	NULL,	"spi_davinci.0");
 LPSC_CLKDEV1(mmcsd_clkdev,	NULL,	"da830-mmc.0");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,	"serial8250.0");
@@ -22,7 +23,7 @@ static const struct davinci_lpsc_clk_info da830_psc0_info[] = {
 	LPSC(0,  0, tpcc,     pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
 	LPSC(1,  0, tptc0,    pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
 	LPSC(2,  0, tptc1,    pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
-	LPSC(3,  0, aemif,    pll0_sysclk3, NULL,         LPSC_ALWAYS_ENABLED),
+	LPSC(3,  0, aemif,    pll0_sysclk3, aemif_clkdev, LPSC_ALWAYS_ENABLED),
 	LPSC(4,  0, spi0,     pll0_sysclk2, spi0_clkdev,  0),
 	LPSC(5,  0, mmcsd,    pll0_sysclk2, mmcsd_clkdev, 0),
 	LPSC(6,  0, aintc,    pll0_sysclk4, NULL,         LPSC_ALWAYS_ENABLED),
-- 
2.17.1

[PATCH v2 05/13] clk: davinci: psc-da830: add a lookup entry for aemif clock

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We want to use the ti-aemif platform driver for da830-evm. To make it
work we need a lookup entry for the aemif clock.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/clk/davinci/psc-da830.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/davinci/psc-da830.c b/drivers/clk/davinci/psc-da830.c
index 081b039fcb02..6481337382a6 100644
--- a/drivers/clk/davinci/psc-da830.c
+++ b/drivers/clk/davinci/psc-da830.c
@@ -14,6 +14,7 @@
 
 #include "psc.h"
 
+LPSC_CLKDEV1(aemif_clkdev,	NULL,	"ti-aemif");
 LPSC_CLKDEV1(spi0_clkdev,	NULL,	"spi_davinci.0");
 LPSC_CLKDEV1(mmcsd_clkdev,	NULL,	"da830-mmc.0");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,	"serial8250.0");
@@ -22,7 +23,7 @@ static const struct davinci_lpsc_clk_info da830_psc0_info[] = {
 	LPSC(0,  0, tpcc,     pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
 	LPSC(1,  0, tptc0,    pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
 	LPSC(2,  0, tptc1,    pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
-	LPSC(3,  0, aemif,    pll0_sysclk3, NULL,         LPSC_ALWAYS_ENABLED),
+	LPSC(3,  0, aemif,    pll0_sysclk3, aemif_clkdev, LPSC_ALWAYS_ENABLED),
 	LPSC(4,  0, spi0,     pll0_sysclk2, spi0_clkdev,  0),
 	LPSC(5,  0, mmcsd,    pll0_sysclk2, mmcsd_clkdev, 0),
 	LPSC(6,  0, aintc,    pll0_sysclk4, NULL,         LPSC_ALWAYS_ENABLED),
-- 
2.17.1

Re: [PATCH v2 05/13] clk: davinci: psc-da830: add a lookup entry for aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to use the ti-aemif platform driver for da830-evm. To make it
> work we need a lookup entry for the aemif clock.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 05/13] clk: davinci: psc-da830: add a lookup entry for aemif clock

[David Lechner]

On 06/26/2018 04:25 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We want to use the ti-aemif platform driver for da830-evm. To make it
> work we need a lookup entry for the aemif clock.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

Reviewed-by: David Lechner <david@lechnology.com>

[PATCH v2 06/13] ARM: davinci: omapl138-hawk: add aemif & nand support

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now have support for aemif & nand from board files. As an example
add support for nand to da850-hawk.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-omapl138-hawk.c | 132 ++++++++++++++++++++
 1 file changed, 132 insertions(+)

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 466e87b24e9a..8d8e3165a45c 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -16,6 +16,11 @@
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/ti-aemif.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
@@ -166,6 +171,129 @@ static __init void omapl138_hawk_mmc_init(void)
 	gpiod_remove_lookup_table(&mmc_gpios_table);
 }
 
+static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
+	{
+		.name		= "u-boot env",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	 },
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "free space",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = {
+	.wsetup		= 24,
+	.wstrobe	= 21,
+	.whold		= 14,
+	.rsetup		= 19,
+	.rstrobe	= 50,
+	.rhold		= 0,
+	.ta		= 20,
+};
+
+static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
+	.core_chipsel	= 1,
+	.parts		= omapl138_hawk_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 4,
+	.bbt_options	= NAND_BBT_USE_FLASH,
+	.options	= NAND_BUSWIDTH_16,
+	.timing		= &omapl138_hawk_nandflash_timing,
+	.mask_chipsel	= 0,
+	.mask_ale	= 0,
+	.mask_cle	= 0,
+};
+
+static struct resource omapl138_hawk_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_32M,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource omapl138_hawk_aemif_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
+	{
+		.cs	= 3,
+	}
+};
+
+static struct platform_device omapl138_hawk_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &omapl138_hawk_nandflash_data,
+		},
+		.resource	= omapl138_hawk_nandflash_resource,
+		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
+	}
+};
+
+static struct aemif_platform_data omapl138_hawk_aemif_pdata = {
+	.cs_offset = 2,
+	.abus_data = omapl138_hawk_aemif_abus_data,
+	.num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data),
+	.sub_devices = omapl138_hawk_aemif_devices,
+	.num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices),
+};
+
+static struct platform_device omapl138_hawk_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &omapl138_hawk_aemif_pdata,
+	},
+	.resource	= omapl138_hawk_aemif_resource,
+	.num_resources	= ARRAY_SIZE(omapl138_hawk_aemif_resource),
+};
+
+static const short omapl138_hawk_nand_pins[] = {
+	DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3,
+	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
+	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
+	DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
+	DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
+	DA850_EMA_A_1, DA850_EMA_A_2,
+	-1
+};
+
+static int omapl138_hawk_register_aemif(void)
+{
+	int ret;
+
+	ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins);
+	if (ret)
+		pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret);
+
+	return platform_device_register(&omapl138_hawk_aemif_device);
+}
+
 static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
 static da8xx_ocic_handler_t hawk_usb_ocic_handler;
 
@@ -298,6 +426,10 @@ static __init void omapl138_hawk_init(void)
 
 	omapl138_hawk_usb_init();
 
+	ret = omapl138_hawk_register_aemif();
+	if (ret)
+		pr_warn("%s: aemif registration failed: %d\n", __func__, ret);
+
 	ret = da8xx_register_watchdog();
 	if (ret)
 		pr_warn("%s: watchdog registration failed: %d\n",
-- 
2.17.1

[PATCH v2 06/13] ARM: davinci: omapl138-hawk: add aemif & nand support

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now have support for aemif & nand from board files. As an example
add support for nand to da850-hawk.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-omapl138-hawk.c | 132 ++++++++++++++++++++
 1 file changed, 132 insertions(+)

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 466e87b24e9a..8d8e3165a45c 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -16,6 +16,11 @@
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/ti-aemif.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
@@ -166,6 +171,129 @@ static __init void omapl138_hawk_mmc_init(void)
 	gpiod_remove_lookup_table(&mmc_gpios_table);
 }
 
+static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
+	{
+		.name		= "u-boot env",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	 },
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "free space",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = {
+	.wsetup		= 24,
+	.wstrobe	= 21,
+	.whold		= 14,
+	.rsetup		= 19,
+	.rstrobe	= 50,
+	.rhold		= 0,
+	.ta		= 20,
+};
+
+static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
+	.core_chipsel	= 1,
+	.parts		= omapl138_hawk_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 4,
+	.bbt_options	= NAND_BBT_USE_FLASH,
+	.options	= NAND_BUSWIDTH_16,
+	.timing		= &omapl138_hawk_nandflash_timing,
+	.mask_chipsel	= 0,
+	.mask_ale	= 0,
+	.mask_cle	= 0,
+};
+
+static struct resource omapl138_hawk_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_32M,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource omapl138_hawk_aemif_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
+	{
+		.cs	= 3,
+	}
+};
+
+static struct platform_device omapl138_hawk_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &omapl138_hawk_nandflash_data,
+		},
+		.resource	= omapl138_hawk_nandflash_resource,
+		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
+	}
+};
+
+static struct aemif_platform_data omapl138_hawk_aemif_pdata = {
+	.cs_offset = 2,
+	.abus_data = omapl138_hawk_aemif_abus_data,
+	.num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data),
+	.sub_devices = omapl138_hawk_aemif_devices,
+	.num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices),
+};
+
+static struct platform_device omapl138_hawk_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &omapl138_hawk_aemif_pdata,
+	},
+	.resource	= omapl138_hawk_aemif_resource,
+	.num_resources	= ARRAY_SIZE(omapl138_hawk_aemif_resource),
+};
+
+static const short omapl138_hawk_nand_pins[] = {
+	DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3,
+	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
+	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
+	DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
+	DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
+	DA850_EMA_A_1, DA850_EMA_A_2,
+	-1
+};
+
+static int omapl138_hawk_register_aemif(void)
+{
+	int ret;
+
+	ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins);
+	if (ret)
+		pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret);
+
+	return platform_device_register(&omapl138_hawk_aemif_device);
+}
+
 static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
 static da8xx_ocic_handler_t hawk_usb_ocic_handler;
 
@@ -298,6 +426,10 @@ static __init void omapl138_hawk_init(void)
 
 	omapl138_hawk_usb_init();
 
+	ret = omapl138_hawk_register_aemif();
+	if (ret)
+		pr_warn("%s: aemif registration failed: %d\n", __func__, ret);
+
 	ret = da8xx_register_watchdog();
 	if (ret)
 		pr_warn("%s: watchdog registration failed: %d\n",
-- 
2.17.1

Re: [PATCH v2 06/13] ARM: davinci: omapl138-hawk: add aemif & nand support

[Sekhar Nori]

On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>  arch/arm/mach-davinci/board-omapl138-hawk.c | 132 ++++++++++++++++++++
>  1 file changed, 132 insertions(+)
> 
> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
> index 466e87b24e9a..8d8e3165a45c 100644
> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
> @@ -16,6 +16,11 @@
>  #include <linux/gpio.h>
>  #include <linux/gpio/machine.h>
>  #include <linux/platform_data/gpio-davinci.h>
> +#include <linux/platform_data/ti-aemif.h>
> +#include <linux/mtd/rawnand.h>
> +#include <linux/mtd/partitions.h>

can you keep this (roughly) sorted by moving these above?

> +#include <linux/platform_data/mtd-davinci.h>
> +#include <linux/platform_data/mtd-davinci-aemif.h>
>  #include <linux/regulator/machine.h>
>  
>  #include <asm/mach-types.h>
> @@ -166,6 +171,129 @@ static __init void omapl138_hawk_mmc_init(void)
>  	gpiod_remove_lookup_table(&mmc_gpios_table);
>  }
>  

> +static struct platform_device omapl138_hawk_aemif_devices[] = {
> +	{
> +		.name		= "davinci_nand",
> +		.id		= 1,

This can be -1 now since you got "mtd: rawnand: davinci: stop using
pdev->id as chipselect" merged.

We cannot change for older platforms, but this is fresh support.

> +		.dev		= {
> +			.platform_data	= &omapl138_hawk_nandflash_data,
> +		},
> +		.resource	= omapl138_hawk_nandflash_resource,
> +		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
> +	}
> +};

Thanks,
Sekhar

[PATCH v2 06/13] ARM: davinci: omapl138-hawk: add aemif & nand support

[Sekhar Nori]

On Tuesday 26 June 2018 02:55 PM, Bartosz Golaszewski wrote:
>  arch/arm/mach-davinci/board-omapl138-hawk.c | 132 ++++++++++++++++++++
>  1 file changed, 132 insertions(+)
> 
> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
> index 466e87b24e9a..8d8e3165a45c 100644
> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
> @@ -16,6 +16,11 @@
>  #include <linux/gpio.h>
>  #include <linux/gpio/machine.h>
>  #include <linux/platform_data/gpio-davinci.h>
> +#include <linux/platform_data/ti-aemif.h>
> +#include <linux/mtd/rawnand.h>
> +#include <linux/mtd/partitions.h>

can you keep this (roughly) sorted by moving these above?

> +#include <linux/platform_data/mtd-davinci.h>
> +#include <linux/platform_data/mtd-davinci-aemif.h>
>  #include <linux/regulator/machine.h>
>  
>  #include <asm/mach-types.h>
> @@ -166,6 +171,129 @@ static __init void omapl138_hawk_mmc_init(void)
>  	gpiod_remove_lookup_table(&mmc_gpios_table);
>  }
>  

> +static struct platform_device omapl138_hawk_aemif_devices[] = {
> +	{
> +		.name		= "davinci_nand",
> +		.id		= 1,

This can be -1 now since you got "mtd: rawnand: davinci: stop using
pdev->id as chipselect" merged.

We cannot change for older platforms, but this is fresh support.

> +		.dev		= {
> +			.platform_data	= &omapl138_hawk_nandflash_data,
> +		},
> +		.resource	= omapl138_hawk_nandflash_resource,
> +		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
> +	}
> +};

Thanks,
Sekhar

[PATCH v2 07/13] ARM: davinci: da850-evm: use aemif platform driver in legacy mode

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in da850-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 93 ++++++++++++++-----------
 1 file changed, 51 insertions(+), 42 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 442c16773f09..ace66f368f8d 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -33,6 +33,7 @@
 #include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/uio_pruss.h>
 #include <linux/regulator/machine.h>
@@ -185,16 +186,6 @@ static struct resource da850_evm_norflash_resource[] = {
 	},
 };
 
-static struct platform_device da850_evm_norflash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data  = &da850_evm_norflash_data,
-	},
-	.num_resources	= 1,
-	.resource	= da850_evm_norflash_resource,
-};
-
 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
  * (128K blocks). It may be used instead of the (default) SPI flash
  * to boot, using TI's tools to install the secondary boot loader
@@ -266,37 +257,58 @@ static struct resource da850_evm_nandflash_resource[] = {
 	},
 };
 
-static struct platform_device da850_evm_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &da850_evm_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
-	.resource	= da850_evm_nandflash_resource,
+static struct resource da850_evm_aemif_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
+		.flags	= IORESOURCE_MEM,
+	}
 };
 
-static struct platform_device *da850_evm_devices[] = {
-	&da850_evm_nandflash_device,
-	&da850_evm_norflash_device,
+static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
+	{
+		.cs	= 3,
+	}
 };
 
-#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
-#define DA8XX_AEMIF_ASIZE_16BIT		0x1
-
-static void __init da850_evm_init_nor(void)
-{
-	void __iomem *aemif_addr;
-
-	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+static struct platform_device da850_evm_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &da850_evm_nandflash_data,
+		},
+		.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
+		.resource	= da850_evm_nandflash_resource,
+	},
+	{
+		.name		= "physmap-flash",
+		.id		= 0,
+		.dev		= {
+			.platform_data  = &da850_evm_norflash_data,
+		},
+		.num_resources	= 1,
+		.resource	= da850_evm_norflash_resource,
+	}
+};
 
-	/* Configure data bus width of CS2 to 16 bit */
-	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
-		DA8XX_AEMIF_ASIZE_16BIT,
-		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+static struct aemif_platform_data da850_evm_aemif_pdata = {
+	.cs_offset = 2,
+	.abus_data = da850_evm_aemif_abus_data,
+	.num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
+	.sub_devices = da850_evm_aemif_devices,
+	.num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
+};
 
-	iounmap(aemif_addr);
-}
+static struct platform_device da850_evm_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &da850_evm_aemif_pdata,
+	},
+	.resource	= da850_evm_aemif_resource,
+	.num_resources	= ARRAY_SIZE(da850_evm_aemif_resource),
+};
 
 static const short da850_evm_nand_pins[] = {
 	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
@@ -339,13 +351,10 @@ static inline void da850_evm_setup_nor_nand(void)
 			pr_warn("%s: NOR mux setup failed: %d\n",
 				__func__, ret);
 
-		da850_evm_init_nor();
-
-		platform_add_devices(da850_evm_devices,
-					ARRAY_SIZE(da850_evm_devices));
-
-		if (davinci_aemif_setup(&da850_evm_nandflash_device))
-			pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+		ret = platform_device_register(&da850_evm_aemif_device);
+		if (ret)
+			pr_warn("%s: registering aemif failed: %d\n",
+				__func__, ret);
 	}
 }
 
-- 
2.17.1

[PATCH v2 07/13] ARM: davinci: da850-evm: use aemif platform driver in legacy mode

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in da850-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 93 ++++++++++++++-----------
 1 file changed, 51 insertions(+), 42 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 442c16773f09..ace66f368f8d 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -33,6 +33,7 @@
 #include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/uio_pruss.h>
 #include <linux/regulator/machine.h>
@@ -185,16 +186,6 @@ static struct resource da850_evm_norflash_resource[] = {
 	},
 };
 
-static struct platform_device da850_evm_norflash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data  = &da850_evm_norflash_data,
-	},
-	.num_resources	= 1,
-	.resource	= da850_evm_norflash_resource,
-};
-
 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
  * (128K blocks). It may be used instead of the (default) SPI flash
  * to boot, using TI's tools to install the secondary boot loader
@@ -266,37 +257,58 @@ static struct resource da850_evm_nandflash_resource[] = {
 	},
 };
 
-static struct platform_device da850_evm_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &da850_evm_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
-	.resource	= da850_evm_nandflash_resource,
+static struct resource da850_evm_aemif_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
+		.flags	= IORESOURCE_MEM,
+	}
 };
 
-static struct platform_device *da850_evm_devices[] = {
-	&da850_evm_nandflash_device,
-	&da850_evm_norflash_device,
+static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
+	{
+		.cs	= 3,
+	}
 };
 
-#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
-#define DA8XX_AEMIF_ASIZE_16BIT		0x1
-
-static void __init da850_evm_init_nor(void)
-{
-	void __iomem *aemif_addr;
-
-	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+static struct platform_device da850_evm_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &da850_evm_nandflash_data,
+		},
+		.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
+		.resource	= da850_evm_nandflash_resource,
+	},
+	{
+		.name		= "physmap-flash",
+		.id		= 0,
+		.dev		= {
+			.platform_data  = &da850_evm_norflash_data,
+		},
+		.num_resources	= 1,
+		.resource	= da850_evm_norflash_resource,
+	}
+};
 
-	/* Configure data bus width of CS2 to 16 bit */
-	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
-		DA8XX_AEMIF_ASIZE_16BIT,
-		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+static struct aemif_platform_data da850_evm_aemif_pdata = {
+	.cs_offset = 2,
+	.abus_data = da850_evm_aemif_abus_data,
+	.num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
+	.sub_devices = da850_evm_aemif_devices,
+	.num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
+};
 
-	iounmap(aemif_addr);
-}
+static struct platform_device da850_evm_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &da850_evm_aemif_pdata,
+	},
+	.resource	= da850_evm_aemif_resource,
+	.num_resources	= ARRAY_SIZE(da850_evm_aemif_resource),
+};
 
 static const short da850_evm_nand_pins[] = {
 	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
@@ -339,13 +351,10 @@ static inline void da850_evm_setup_nor_nand(void)
 			pr_warn("%s: NOR mux setup failed: %d\n",
 				__func__, ret);
 
-		da850_evm_init_nor();
-
-		platform_add_devices(da850_evm_devices,
-					ARRAY_SIZE(da850_evm_devices));
-
-		if (davinci_aemif_setup(&da850_evm_nandflash_device))
-			pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+		ret = platform_device_register(&da850_evm_aemif_device);
+		if (ret)
+			pr_warn("%s: registering aemif failed: %d\n",
+				__func__, ret);
 	}
 }
 
-- 
2.17.1

[PATCH v2 08/13] ARM: davinci: dm365-evm: use the ti-aemif soc driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in dm365-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 59 +++++++++++++++++++------
 1 file changed, 46 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 307e88d99dd3..8143756ff38b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -28,6 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/v4l2-dv-timings.h>
+#include <linux/platform_data/ti-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -159,14 +160,47 @@ static struct resource davinci_nand_resources[] = {
 	},
 };
 
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
+static struct platform_device davinci_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 0,
+		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
+		.resource	= davinci_nand_resources,
+		.dev		= {
+			.platform_data	= &davinci_nand_data,
+		},
+	}
+};
+
+static struct resource davinci_aemif_resources[] = {
+	{
+		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
+	{
+		.cs		= 1,
+	},
+};
+
+static struct aemif_platform_data davinci_aemif_pdata = {
+	.abus_data		= da850_evm_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(da850_evm_aemif_abus_data),
+	.sub_devices		= davinci_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
+};
+
+static struct platform_device davinci_aemif_device = {
+	.name			= "ti-aemif",
+	.id			= -1,
+	.dev = {
+		.platform_data	= &davinci_aemif_pdata,
 	},
+	.resource		= davinci_aemif_resources,
+	.num_resources		= ARRAY_SIZE(davinci_aemif_resources),
 };
 
 static struct at24_platform_data eeprom_info = {
@@ -537,10 +571,6 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
-static struct platform_device *dm365_evm_nand_devices[] __initdata = {
-	&davinci_nand_device,
-};
-
 static inline int have_leds(void)
 {
 #ifdef CONFIG_LEDS_CLASS
@@ -628,6 +658,7 @@ static void __init evm_init_cpld(void)
 	u8 mux, resets;
 	const char *label;
 	struct clk *aemif_clk;
+	int rc;
 
 	/* Make sure we can configure the CPLD through CS1.  Then
 	 * leave it on for later access to MMC and LED registers.
@@ -660,8 +691,10 @@ static void __init evm_init_cpld(void)
 		/* external keypad mux */
 		mux |= BIT(7);
 
-		platform_add_devices(dm365_evm_nand_devices,
-				ARRAY_SIZE(dm365_evm_nand_devices));
+		rc = platform_device_register(&davinci_aemif_device);
+		if (rc)
+			pr_warn("%s(): error registering the aemif device: %d\n",
+				__func__, rc);
 	} else {
 		/* no OneNAND support yet */
 	}
-- 
2.17.1

[PATCH v2 08/13] ARM: davinci: dm365-evm: use the ti-aemif soc driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in dm365-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 59 +++++++++++++++++++------
 1 file changed, 46 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 307e88d99dd3..8143756ff38b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -28,6 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/v4l2-dv-timings.h>
+#include <linux/platform_data/ti-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -159,14 +160,47 @@ static struct resource davinci_nand_resources[] = {
 	},
 };
 
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
+static struct platform_device davinci_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 0,
+		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
+		.resource	= davinci_nand_resources,
+		.dev		= {
+			.platform_data	= &davinci_nand_data,
+		},
+	}
+};
+
+static struct resource davinci_aemif_resources[] = {
+	{
+		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
+	{
+		.cs		= 1,
+	},
+};
+
+static struct aemif_platform_data davinci_aemif_pdata = {
+	.abus_data		= da850_evm_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(da850_evm_aemif_abus_data),
+	.sub_devices		= davinci_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
+};
+
+static struct platform_device davinci_aemif_device = {
+	.name			= "ti-aemif",
+	.id			= -1,
+	.dev = {
+		.platform_data	= &davinci_aemif_pdata,
 	},
+	.resource		= davinci_aemif_resources,
+	.num_resources		= ARRAY_SIZE(davinci_aemif_resources),
 };
 
 static struct at24_platform_data eeprom_info = {
@@ -537,10 +571,6 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
-static struct platform_device *dm365_evm_nand_devices[] __initdata = {
-	&davinci_nand_device,
-};
-
 static inline int have_leds(void)
 {
 #ifdef CONFIG_LEDS_CLASS
@@ -628,6 +658,7 @@ static void __init evm_init_cpld(void)
 	u8 mux, resets;
 	const char *label;
 	struct clk *aemif_clk;
+	int rc;
 
 	/* Make sure we can configure the CPLD through CS1.  Then
 	 * leave it on for later access to MMC and LED registers.
@@ -660,8 +691,10 @@ static void __init evm_init_cpld(void)
 		/* external keypad mux */
 		mux |= BIT(7);
 
-		platform_add_devices(dm365_evm_nand_devices,
-				ARRAY_SIZE(dm365_evm_nand_devices));
+		rc = platform_device_register(&davinci_aemif_device);
+		if (rc)
+			pr_warn("%s(): error registering the aemif device: %d\n",
+				__func__, rc);
 	} else {
 		/* no OneNAND support yet */
 	}
-- 
2.17.1

[PATCH v2 09/13] ARM: davinci: dm644x-evm: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in dm644x-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 55 ++++++++++++++++++------
 1 file changed, 42 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 738e443ab15f..e4a8f9225d16 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -42,6 +42,7 @@
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
 
 #include "davinci.h"
 
@@ -174,14 +175,47 @@ static struct resource davinci_evm_nandflash_resource[] = {
 	},
 };
 
-static struct platform_device davinci_evm_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_evm_nandflash_data,
+static struct resource davinci_evm_aemif_resource[] = {
+	{
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
 	},
-	.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
-	.resource	= davinci_evm_nandflash_resource,
+};
+
+static struct aemif_abus_data davinci_evm_aemif_abus_data[] = {
+	{
+		.cs		= 1,
+	},
+};
+
+static struct platform_device davinci_evm_nandflash_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 0,
+		.dev		= {
+			.platform_data	= &davinci_evm_nandflash_data,
+		},
+		.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
+		.resource	= davinci_evm_nandflash_resource,
+	},
+};
+
+static struct aemif_platform_data davinci_evm_aemif_pdata = {
+	.abus_data = davinci_evm_aemif_abus_data,
+	.num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data),
+	.sub_devices = davinci_evm_nandflash_devices,
+	.num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices),
+};
+
+static struct platform_device davinci_evm_aemif_device = {
+	.name			= "ti-aemif",
+	.id			= -1,
+	.dev = {
+		.platform_data	= &davinci_evm_aemif_pdata,
+	},
+	.resource		= davinci_evm_aemif_resource,
+	.num_resources		= ARRAY_SIZE(davinci_evm_aemif_resource),
 };
 
 static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
@@ -795,12 +829,7 @@ static __init void davinci_evm_init(void)
 
 		/* only one device will be jumpered and detected */
 		if (HAS_NAND) {
-			platform_device_register(&davinci_evm_nandflash_device);
-
-			if (davinci_aemif_setup(&davinci_evm_nandflash_device))
-				pr_warn("%s: Cannot configure AEMIF\n",
-					__func__);
-
+			platform_device_register(&davinci_evm_aemif_device);
 #ifdef CONFIG_I2C
 			evm_leds[7].default_trigger = "nand-disk";
 #endif
-- 
2.17.1

[PATCH v2 09/13] ARM: davinci: dm644x-evm: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in dm644x-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 55 ++++++++++++++++++------
 1 file changed, 42 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 738e443ab15f..e4a8f9225d16 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -42,6 +42,7 @@
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
 
 #include "davinci.h"
 
@@ -174,14 +175,47 @@ static struct resource davinci_evm_nandflash_resource[] = {
 	},
 };
 
-static struct platform_device davinci_evm_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_evm_nandflash_data,
+static struct resource davinci_evm_aemif_resource[] = {
+	{
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
 	},
-	.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
-	.resource	= davinci_evm_nandflash_resource,
+};
+
+static struct aemif_abus_data davinci_evm_aemif_abus_data[] = {
+	{
+		.cs		= 1,
+	},
+};
+
+static struct platform_device davinci_evm_nandflash_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 0,
+		.dev		= {
+			.platform_data	= &davinci_evm_nandflash_data,
+		},
+		.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
+		.resource	= davinci_evm_nandflash_resource,
+	},
+};
+
+static struct aemif_platform_data davinci_evm_aemif_pdata = {
+	.abus_data = davinci_evm_aemif_abus_data,
+	.num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data),
+	.sub_devices = davinci_evm_nandflash_devices,
+	.num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices),
+};
+
+static struct platform_device davinci_evm_aemif_device = {
+	.name			= "ti-aemif",
+	.id			= -1,
+	.dev = {
+		.platform_data	= &davinci_evm_aemif_pdata,
+	},
+	.resource		= davinci_evm_aemif_resource,
+	.num_resources		= ARRAY_SIZE(davinci_evm_aemif_resource),
 };
 
 static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
@@ -795,12 +829,7 @@ static __init void davinci_evm_init(void)
 
 		/* only one device will be jumpered and detected */
 		if (HAS_NAND) {
-			platform_device_register(&davinci_evm_nandflash_device);
-
-			if (davinci_aemif_setup(&davinci_evm_nandflash_device))
-				pr_warn("%s: Cannot configure AEMIF\n",
-					__func__);
-
+			platform_device_register(&davinci_evm_aemif_device);
 #ifdef CONFIG_I2C
 			evm_leds[7].default_trigger = "nand-disk";
 #endif
-- 
2.17.1

[PATCH v2 10/13] ARM: davinci: da830-evm: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in da830-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c | 56 +++++++++++++++++++------
 1 file changed, 44 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index b2470141dba3..7d8ab36ff83d 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -28,6 +28,7 @@
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/ti-aemif.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
@@ -333,14 +334,48 @@ static struct resource da830_evm_nand_resources[] = {
 	},
 };
 
-static struct platform_device da830_evm_nand_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &da830_evm_nand_pdata,
+static struct platform_device da830_evm_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &da830_evm_nand_pdata,
+		},
+		.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
+		.resource	= da830_evm_nand_resources,
+	},
+};
+
+static struct resource da830_evm_aemif_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct aemif_abus_data da830_evm_aemif_abus_data[] = {
+	{
+		.cs	= 3,
 	},
-	.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
-	.resource	= da830_evm_nand_resources,
+};
+
+static struct aemif_platform_data da830_evm_aemif_pdata = {
+	.abus_data		= da830_evm_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(da830_evm_aemif_abus_data),
+	.sub_devices		= da830_evm_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(da830_evm_aemif_devices),
+	.cs_offset		= 2,
+};
+
+static struct platform_device da830_evm_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data = &da830_evm_aemif_pdata,
+	},
+	.resource	= da830_evm_aemif_resource,
+	.num_resources	= ARRAY_SIZE(da830_evm_aemif_resource),
 };
 
 /*
@@ -371,12 +406,9 @@ static inline void da830_evm_init_nand(int mux_mode)
 	if (ret)
 		pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
 
-	ret = platform_device_register(&da830_evm_nand_device);
+	ret = platform_device_register(&da830_evm_aemif_device);
 	if (ret)
-		pr_warn("%s: NAND device not registered\n", __func__);
-
-	if (davinci_aemif_setup(&da830_evm_nand_device))
-		pr_warn("%s: Cannot configure AEMIF\n", __func__);
+		pr_warn("%s: AEMIF device not registered\n", __func__);
 
 	gpio_direction_output(mux_mode, 1);
 }
-- 
2.17.1

[PATCH v2 10/13] ARM: davinci: da830-evm: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in da830-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c | 56 +++++++++++++++++++------
 1 file changed, 44 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index b2470141dba3..7d8ab36ff83d 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -28,6 +28,7 @@
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/ti-aemif.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
@@ -333,14 +334,48 @@ static struct resource da830_evm_nand_resources[] = {
 	},
 };
 
-static struct platform_device da830_evm_nand_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &da830_evm_nand_pdata,
+static struct platform_device da830_evm_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &da830_evm_nand_pdata,
+		},
+		.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
+		.resource	= da830_evm_nand_resources,
+	},
+};
+
+static struct resource da830_evm_aemif_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct aemif_abus_data da830_evm_aemif_abus_data[] = {
+	{
+		.cs	= 3,
 	},
-	.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
-	.resource	= da830_evm_nand_resources,
+};
+
+static struct aemif_platform_data da830_evm_aemif_pdata = {
+	.abus_data		= da830_evm_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(da830_evm_aemif_abus_data),
+	.sub_devices		= da830_evm_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(da830_evm_aemif_devices),
+	.cs_offset		= 2,
+};
+
+static struct platform_device da830_evm_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data = &da830_evm_aemif_pdata,
+	},
+	.resource	= da830_evm_aemif_resource,
+	.num_resources	= ARRAY_SIZE(da830_evm_aemif_resource),
 };
 
 /*
@@ -371,12 +406,9 @@ static inline void da830_evm_init_nand(int mux_mode)
 	if (ret)
 		pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
 
-	ret = platform_device_register(&da830_evm_nand_device);
+	ret = platform_device_register(&da830_evm_aemif_device);
 	if (ret)
-		pr_warn("%s: NAND device not registered\n", __func__);
-
-	if (davinci_aemif_setup(&da830_evm_nand_device))
-		pr_warn("%s: Cannot configure AEMIF\n", __func__);
+		pr_warn("%s: AEMIF device not registered\n", __func__);
 
 	gpio_direction_output(mux_mode, 1);
 }
-- 
2.17.1

[PATCH v2 11/13] ARM: davinci: dm646x-evm: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in dm646x-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 52 +++++++++++++++++++-----
 1 file changed, 41 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 867ab2fa6cfd..3e5ee09ee717 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -24,6 +24,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_data/at24.h>
 #include <linux/platform_data/pcf857x.h>
+#include <linux/platform_data/ti-aemif.h>
 
 #include <media/i2c/tvp514x.h>
 #include <media/i2c/adv7343.h>
@@ -106,16 +107,47 @@ static struct resource davinci_nand_resources[] = {
 	},
 };
 
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
+static struct platform_device davinci_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 0,
+		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
+		.resource	= davinci_nand_resources,
+		.dev		= {
+			.platform_data	= &davinci_nand_data,
+		},
+	},
+};
+
+static struct resource davinci_aemif_resources[] = {
+	{
+		.start	= DM646X_ASYNC_EMIF_CONTROL_BASE,
+		.end	= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
 
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
+static struct aemif_abus_data davinci_aemif_abus_data[] = {
+	{
+		.cs	= 1,
+	},
+};
 
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
+static struct aemif_platform_data davinci_aemif_pdata = {
+	.abus_data		= davinci_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(davinci_aemif_abus_data),
+	.sub_devices		= davinci_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
+};
+
+static struct platform_device davinci_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &davinci_aemif_pdata,
 	},
+	.resource	= davinci_aemif_resources,
+	.num_resources	= ARRAY_SIZE(davinci_aemif_resources),
 };
 
 #define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
@@ -793,10 +825,8 @@ static __init void evm_init(void)
 	if (machine_is_davinci_dm6467tevm())
 		davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
 
-	platform_device_register(&davinci_nand_device);
-
-	if (davinci_aemif_setup(&davinci_nand_device))
-		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+	if (platform_device_register(&davinci_aemif_device))
+		pr_warn("%s: Cannot register AEMIF device.\n", __func__);
 
 	dm646x_init_edma(dm646x_edma_rsv);
 
-- 
2.17.1

[PATCH v2 11/13] ARM: davinci: dm646x-evm: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in dm646x-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 52 +++++++++++++++++++-----
 1 file changed, 41 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 867ab2fa6cfd..3e5ee09ee717 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -24,6 +24,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_data/at24.h>
 #include <linux/platform_data/pcf857x.h>
+#include <linux/platform_data/ti-aemif.h>
 
 #include <media/i2c/tvp514x.h>
 #include <media/i2c/adv7343.h>
@@ -106,16 +107,47 @@ static struct resource davinci_nand_resources[] = {
 	},
 };
 
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
+static struct platform_device davinci_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 0,
+		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
+		.resource	= davinci_nand_resources,
+		.dev		= {
+			.platform_data	= &davinci_nand_data,
+		},
+	},
+};
+
+static struct resource davinci_aemif_resources[] = {
+	{
+		.start	= DM646X_ASYNC_EMIF_CONTROL_BASE,
+		.end	= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
 
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
+static struct aemif_abus_data davinci_aemif_abus_data[] = {
+	{
+		.cs	= 1,
+	},
+};
 
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
+static struct aemif_platform_data davinci_aemif_pdata = {
+	.abus_data		= davinci_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(davinci_aemif_abus_data),
+	.sub_devices		= davinci_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
+};
+
+static struct platform_device davinci_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &davinci_aemif_pdata,
 	},
+	.resource	= davinci_aemif_resources,
+	.num_resources	= ARRAY_SIZE(davinci_aemif_resources),
 };
 
 #define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
@@ -793,10 +825,8 @@ static __init void evm_init(void)
 	if (machine_is_davinci_dm6467tevm())
 		davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
 
-	platform_device_register(&davinci_nand_device);
-
-	if (davinci_aemif_setup(&davinci_nand_device))
-		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+	if (platform_device_register(&davinci_aemif_device))
+		pr_warn("%s: Cannot register AEMIF device.\n", __func__);
 
 	dm646x_init_edma(dm646x_edma_rsv);
 
-- 
2.17.1

[PATCH v2 12/13] ARM: davinci: mityomapl138: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in mityomapl138.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 55 ++++++++++++++++------
 1 file changed, 41 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2cce0d7d2f2a..2933e0c87cfa 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -30,6 +30,7 @@
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
 #include <mach/mux.h>
 #include <linux/platform_data/spi-davinci.h>
 
@@ -422,27 +423,53 @@ static struct resource mityomapl138_nandflash_resource[] = {
 	},
 };
 
-static struct platform_device mityomapl138_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mityomapl138_nandflash_data,
+static struct platform_device mityomapl138_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &mityomapl138_nandflash_data,
+		},
+		.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
+		.resource	= mityomapl138_nandflash_resource,
 	},
-	.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-	.resource	= mityomapl138_nandflash_resource,
 };
 
-static struct platform_device *mityomapl138_devices[] __initdata = {
-	&mityomapl138_nandflash_device,
+static struct resource mityomapl138_aemif_resources[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
+	{
+		.cs	= 1,
+	},
+};
+
+static struct aemif_platform_data mityomapl138_aemif_pdata = {
+	.abus_data		= mityomapl138_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(mityomapl138_aemif_abus_data),
+	.sub_devices		= mityomapl138_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(mityomapl138_aemif_devices),
+};
+
+static struct platform_device mityomapl138_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &mityomapl138_aemif_pdata,
+	},
+	.resource	= mityomapl138_aemif_resources,
+	.num_resources	= ARRAY_SIZE(mityomapl138_aemif_resources),
 };
 
 static void __init mityomapl138_setup_nand(void)
 {
-	platform_add_devices(mityomapl138_devices,
-				 ARRAY_SIZE(mityomapl138_devices));
-
-	if (davinci_aemif_setup(&mityomapl138_nandflash_device))
-		pr_warn("%s: Cannot configure AEMIF\n", __func__);
+	if (platform_device_register(&mityomapl138_aemif_device))
+		pr_warn("%s: Cannot register AEMIF device\n", __func__);
 }
 
 static const short mityomap_mii_pins[] = {
-- 
2.17.1

[PATCH v2 12/13] ARM: davinci: mityomapl138: use aemif platform driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now support board files in the aemif driver. Register a platform
device instead of using the handcrafted API in mityomapl138.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-mityomapl138.c | 55 ++++++++++++++++------
 1 file changed, 41 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2cce0d7d2f2a..2933e0c87cfa 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -30,6 +30,7 @@
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/ti-aemif.h>
 #include <mach/mux.h>
 #include <linux/platform_data/spi-davinci.h>
 
@@ -422,27 +423,53 @@ static struct resource mityomapl138_nandflash_resource[] = {
 	},
 };
 
-static struct platform_device mityomapl138_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mityomapl138_nandflash_data,
+static struct platform_device mityomapl138_aemif_devices[] = {
+	{
+		.name		= "davinci_nand",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &mityomapl138_nandflash_data,
+		},
+		.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
+		.resource	= mityomapl138_nandflash_resource,
 	},
-	.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-	.resource	= mityomapl138_nandflash_resource,
 };
 
-static struct platform_device *mityomapl138_devices[] __initdata = {
-	&mityomapl138_nandflash_device,
+static struct resource mityomapl138_aemif_resources[] = {
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
+	{
+		.cs	= 1,
+	},
+};
+
+static struct aemif_platform_data mityomapl138_aemif_pdata = {
+	.abus_data		= mityomapl138_aemif_abus_data,
+	.num_abus_data		= ARRAY_SIZE(mityomapl138_aemif_abus_data),
+	.sub_devices		= mityomapl138_aemif_devices,
+	.num_sub_devices	= ARRAY_SIZE(mityomapl138_aemif_devices),
+};
+
+static struct platform_device mityomapl138_aemif_device = {
+	.name		= "ti-aemif",
+	.id		= -1,
+	.dev = {
+		.platform_data	= &mityomapl138_aemif_pdata,
+	},
+	.resource	= mityomapl138_aemif_resources,
+	.num_resources	= ARRAY_SIZE(mityomapl138_aemif_resources),
 };
 
 static void __init mityomapl138_setup_nand(void)
 {
-	platform_add_devices(mityomapl138_devices,
-				 ARRAY_SIZE(mityomapl138_devices));
-
-	if (davinci_aemif_setup(&mityomapl138_nandflash_device))
-		pr_warn("%s: Cannot configure AEMIF\n", __func__);
+	if (platform_device_register(&mityomapl138_aemif_device))
+		pr_warn("%s: Cannot register AEMIF device\n", __func__);
 }
 
 static const short mityomap_mii_pins[] = {
-- 
2.17.1

[PATCH v2 13/13] ARM: davinci: unduplicate aemif support

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

All users now register platform devices using the ti-aemif driver.
Remove the handcrafted aemif API.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/Makefile                |   2 +-
 arch/arm/mach-davinci/aemif.c                 | 218 ------------------
 .../linux/platform_data/mtd-davinci-aemif.h   |   1 -
 3 files changed, 1 insertion(+), 220 deletions(-)
 delete mode 100644 arch/arm/mach-davinci/aemif.c

diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 8725d8bea567..93d271b4d84b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -6,7 +6,7 @@
 
 # Common objects
 obj-y 					:= time.o serial.o usb.o \
-					   common.o sram.o aemif.o
+					   common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
deleted file mode 100644
index e4ab3f3a2a1f..000000000000
--- a/arch/arm/mach-davinci/aemif.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * AEMIF support for DaVinci SoCs
- *
- * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/time.h>
-
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/mtd-davinci.h>
-
-/* Timing value configuration */
-
-#define TA(x)		((x) << 2)
-#define RHOLD(x)	((x) << 4)
-#define RSTROBE(x)	((x) << 7)
-#define RSETUP(x)	((x) << 13)
-#define WHOLD(x)	((x) << 17)
-#define WSTROBE(x)	((x) << 20)
-#define WSETUP(x)	((x) << 26)
-
-#define TA_MAX		0x3
-#define RHOLD_MAX	0x7
-#define RSTROBE_MAX	0x3f
-#define RSETUP_MAX	0xf
-#define WHOLD_MAX	0x7
-#define WSTROBE_MAX	0x3f
-#define WSETUP_MAX	0xf
-
-#define TIMING_MASK	(TA(TA_MAX) | \
-				RHOLD(RHOLD_MAX) | \
-				RSTROBE(RSTROBE_MAX) |	\
-				RSETUP(RSETUP_MAX) | \
-				WHOLD(WHOLD_MAX) | \
-				WSTROBE(WSTROBE_MAX) | \
-				WSETUP(WSETUP_MAX))
-
-static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static inline void davinci_aemif_writel(void __iomem *base,
-					int offset, unsigned long value)
-{
-	writel_relaxed(value, base + offset);
-}
-
-/*
- * aemif_calc_rate - calculate timing data.
- * @wanted: The cycle time needed in nanoseconds.
- * @clk: The input clock rate in kHz.
- * @max: The maximum divider value that can be programmed.
- *
- * On success, returns the calculated timing value minus 1 for easy
- * programming into AEMIF timing registers, else negative errno.
- */
-static int aemif_calc_rate(int wanted, unsigned long clk, int max)
-{
-	int result;
-
-	result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
-
-	pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted);
-
-	/* It is generally OK to have a more relaxed timing than requested... */
-	if (result < 0)
-		result = 0;
-
-	/* ... But configuring tighter timings is not an option. */
-	else if (result > max)
-		result = -EINVAL;
-
-	return result;
-}
-
-/**
- * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface
- * @t: timing values to be progammed
- * @base: The virtual base address of the AEMIF interface
- * @cs: chip-select to program the timing values for
- * @clkrate: the AEMIF clkrate
- *
- * This function programs the given timing values (in real clock) into the
- * AEMIF registers taking the AEMIF clock into account.
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs,
-					unsigned long clkrate)
-{
-	unsigned set, val;
-	int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
-	unsigned offset = A1CR_OFFSET + cs * 4;
-
-	if (!t)
-		return 0;	/* Nothing to do */
-
-	clkrate /= 1000;	/* turn clock into kHz for ease of use */
-
-	ta	= aemif_calc_rate(t->ta, clkrate, TA_MAX);
-	rhold	= aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX);
-	rstrobe	= aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX);
-	rsetup	= aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX);
-	whold	= aemif_calc_rate(t->whold, clkrate, WHOLD_MAX);
-	wstrobe	= aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX);
-	wsetup	= aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX);
-
-	if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
-			whold < 0 || wstrobe < 0 || wsetup < 0) {
-		pr_err("%s: cannot get suitable timings\n", __func__);
-		return -EINVAL;
-	}
-
-	set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
-		WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
-
-	val = __raw_readl(base + offset);
-	val &= ~TIMING_MASK;
-	val |= set;
-	__raw_writel(val, base + offset);
-
-	return 0;
-}
-
-/**
- * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata
- * @pdev - link to platform device to setup settings for
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-int davinci_aemif_setup(struct platform_device *pdev)
-{
-	struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev);
-	uint32_t val;
-	unsigned long clkrate;
-	struct resource	*res;
-	void __iomem *base;
-	struct clk *clk;
-	int ret = 0;
-
-	clk = clk_get(&pdev->dev, "aemif");
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret < 0) {
-		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
-			ret);
-		goto err_put;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	base = ioremap(res->start, resource_size(res));
-	if (!base) {
-		dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res);
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	/*
-	 * Setup Async configuration register in case we did not boot
-	 * from NAND and so bootloader did not bother to set it up.
-	 */
-	val = davinci_aemif_readl(base, A1CR_OFFSET + pdata->core_chipsel * 4);
-	/*
-	 * Extended Wait is not valid and Select Strobe mode is not
-	 * used
-	 */
-	val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
-	if (pdata->options & NAND_BUSWIDTH_16)
-		val |= 0x1;
-
-	davinci_aemif_writel(base, A1CR_OFFSET + pdata->core_chipsel * 4, val);
-
-	clkrate = clk_get_rate(clk);
-
-	if (pdata->timing)
-		ret = davinci_aemif_setup_timing(pdata->timing, base,
-						 pdata->core_chipsel, clkrate);
-
-	if (ret < 0)
-		dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
-
-	iounmap(base);
-err:
-	clk_disable_unprepare(clk);
-err_put:
-	clk_put(clk);
-	return ret;
-}
diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h
index 97948ac2bb9b..a403dd51dacc 100644
--- a/include/linux/platform_data/mtd-davinci-aemif.h
+++ b/include/linux/platform_data/mtd-davinci-aemif.h
@@ -33,5 +33,4 @@ struct davinci_aemif_timing {
 	u8	ta;
 };
 
-int davinci_aemif_setup(struct platform_device *pdev);
 #endif
-- 
2.17.1

[PATCH v2 13/13] ARM: davinci: unduplicate aemif support

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

All users now register platform devices using the ti-aemif driver.
Remove the handcrafted aemif API.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/Makefile                |   2 +-
 arch/arm/mach-davinci/aemif.c                 | 218 ------------------
 .../linux/platform_data/mtd-davinci-aemif.h   |   1 -
 3 files changed, 1 insertion(+), 220 deletions(-)
 delete mode 100644 arch/arm/mach-davinci/aemif.c

diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 8725d8bea567..93d271b4d84b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -6,7 +6,7 @@
 
 # Common objects
 obj-y 					:= time.o serial.o usb.o \
-					   common.o sram.o aemif.o
+					   common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
deleted file mode 100644
index e4ab3f3a2a1f..000000000000
--- a/arch/arm/mach-davinci/aemif.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * AEMIF support for DaVinci SoCs
- *
- * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/time.h>
-
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/mtd-davinci.h>
-
-/* Timing value configuration */
-
-#define TA(x)		((x) << 2)
-#define RHOLD(x)	((x) << 4)
-#define RSTROBE(x)	((x) << 7)
-#define RSETUP(x)	((x) << 13)
-#define WHOLD(x)	((x) << 17)
-#define WSTROBE(x)	((x) << 20)
-#define WSETUP(x)	((x) << 26)
-
-#define TA_MAX		0x3
-#define RHOLD_MAX	0x7
-#define RSTROBE_MAX	0x3f
-#define RSETUP_MAX	0xf
-#define WHOLD_MAX	0x7
-#define WSTROBE_MAX	0x3f
-#define WSETUP_MAX	0xf
-
-#define TIMING_MASK	(TA(TA_MAX) | \
-				RHOLD(RHOLD_MAX) | \
-				RSTROBE(RSTROBE_MAX) |	\
-				RSETUP(RSETUP_MAX) | \
-				WHOLD(WHOLD_MAX) | \
-				WSTROBE(WSTROBE_MAX) | \
-				WSETUP(WSETUP_MAX))
-
-static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static inline void davinci_aemif_writel(void __iomem *base,
-					int offset, unsigned long value)
-{
-	writel_relaxed(value, base + offset);
-}
-
-/*
- * aemif_calc_rate - calculate timing data.
- * @wanted: The cycle time needed in nanoseconds.
- * @clk: The input clock rate in kHz.
- * @max: The maximum divider value that can be programmed.
- *
- * On success, returns the calculated timing value minus 1 for easy
- * programming into AEMIF timing registers, else negative errno.
- */
-static int aemif_calc_rate(int wanted, unsigned long clk, int max)
-{
-	int result;
-
-	result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
-
-	pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted);
-
-	/* It is generally OK to have a more relaxed timing than requested... */
-	if (result < 0)
-		result = 0;
-
-	/* ... But configuring tighter timings is not an option. */
-	else if (result > max)
-		result = -EINVAL;
-
-	return result;
-}
-
-/**
- * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface
- * @t: timing values to be progammed
- * @base: The virtual base address of the AEMIF interface
- * @cs: chip-select to program the timing values for
- * @clkrate: the AEMIF clkrate
- *
- * This function programs the given timing values (in real clock) into the
- * AEMIF registers taking the AEMIF clock into account.
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs,
-					unsigned long clkrate)
-{
-	unsigned set, val;
-	int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
-	unsigned offset = A1CR_OFFSET + cs * 4;
-
-	if (!t)
-		return 0;	/* Nothing to do */
-
-	clkrate /= 1000;	/* turn clock into kHz for ease of use */
-
-	ta	= aemif_calc_rate(t->ta, clkrate, TA_MAX);
-	rhold	= aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX);
-	rstrobe	= aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX);
-	rsetup	= aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX);
-	whold	= aemif_calc_rate(t->whold, clkrate, WHOLD_MAX);
-	wstrobe	= aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX);
-	wsetup	= aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX);
-
-	if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
-			whold < 0 || wstrobe < 0 || wsetup < 0) {
-		pr_err("%s: cannot get suitable timings\n", __func__);
-		return -EINVAL;
-	}
-
-	set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
-		WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
-
-	val = __raw_readl(base + offset);
-	val &= ~TIMING_MASK;
-	val |= set;
-	__raw_writel(val, base + offset);
-
-	return 0;
-}
-
-/**
- * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata
- * @pdev - link to platform device to setup settings for
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-int davinci_aemif_setup(struct platform_device *pdev)
-{
-	struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev);
-	uint32_t val;
-	unsigned long clkrate;
-	struct resource	*res;
-	void __iomem *base;
-	struct clk *clk;
-	int ret = 0;
-
-	clk = clk_get(&pdev->dev, "aemif");
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret < 0) {
-		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
-			ret);
-		goto err_put;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	base = ioremap(res->start, resource_size(res));
-	if (!base) {
-		dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res);
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	/*
-	 * Setup Async configuration register in case we did not boot
-	 * from NAND and so bootloader did not bother to set it up.
-	 */
-	val = davinci_aemif_readl(base, A1CR_OFFSET + pdata->core_chipsel * 4);
-	/*
-	 * Extended Wait is not valid and Select Strobe mode is not
-	 * used
-	 */
-	val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
-	if (pdata->options & NAND_BUSWIDTH_16)
-		val |= 0x1;
-
-	davinci_aemif_writel(base, A1CR_OFFSET + pdata->core_chipsel * 4, val);
-
-	clkrate = clk_get_rate(clk);
-
-	if (pdata->timing)
-		ret = davinci_aemif_setup_timing(pdata->timing, base,
-						 pdata->core_chipsel, clkrate);
-
-	if (ret < 0)
-		dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
-
-	iounmap(base);
-err:
-	clk_disable_unprepare(clk);
-err_put:
-	clk_put(clk);
-	return ret;
-}
diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h
index 97948ac2bb9b..a403dd51dacc 100644
--- a/include/linux/platform_data/mtd-davinci-aemif.h
+++ b/include/linux/platform_data/mtd-davinci-aemif.h
@@ -33,5 +33,4 @@ struct davinci_aemif_timing {
 	u8	ta;
 };
 
-int davinci_aemif_setup(struct platform_device *pdev);
 #endif
-- 
2.17.1